Export price list - Frank GmbH

More documents

Recommendations

Info

Quality assessment The high quality standard of our products is documented by a range of approvals. Pipes and fittings made of PE and PP are approved according to the building- and inspection policy of DIBt Berlin. Pipes and fittings with DIBt-, DVGW- and FM- approval are marked with corresponding logo in our delivery program. Information regarding further approvals (SVGW, ÖVGW, KIWA, etc.) are available in our technical department. Overview FM approved pipes and fittings in SDR 11: V As well the production as the sales of our valves, geothermal system, PE-pipes and fittings and welding equipment are supervised by a QM system acc. DIN EN ISO 9001 and guarantees a continuous control of high quality standards. For all products we deliver on request an inspection certificate 3.1 acc. DIN EN 10204, which is invoiced by Euro 25,00. For FM projects we basically would like to ask you to send us your corresponding enquiry, as special conditions regarding dimensions and prices are valid. Pipes SDR 11 Short spigot fittings SDR 11 Long spigot fittings SDR 11 Electrofusion fittings SDR 11 Article Diameter Article Diameter Article Diameter Article Diameter PE-100 OD 63 - 400 Tee OD 63 - 500 Sweep bends OD 90 - 315 E-coupler OD 63 - 315 black 11°- 90° Tee reduced OD 125 - 250 Elbow 45° OD 63 - 315 Reducer OD 90 - 225 Stub flange OD 63 - 400 Elbow 90° OD 250 - 315 Elbow 45° OD 63 - 225 Backing ring OD 63 - 400 Tee OD 63 - 315 Elbow 90° OD 63 - 225 Tee reduced OD 63 - 315 End cap OD 63 - 315 Stub flange OD 63 - 315 Backing ring OD 63 -400 Reducer concentric OD 63 - 315 End cap OD 63 - 315 February 2009
General Terms and Conditions of Delivery and Payment 1. General 1.1 Exclusively the following Terms and Conditions of Delivery and Payment shall govern our deliveries and apply to entrepreneurs, legal entities under public law or a separate trust asset under public law. The present Terms and Conditions shall also apply to all future business relations, even if these have not been explicitly set up again. Upon placement of the order by the Customer on the basis of our quotation, at the latest however 14 days after the non-contested receipt of the order confirmation, the present Terms and Conditions shall be deemed accepted. Should the present Terms and Conditions conflict with the terms and conditions of the Customer, even if these feature subsequently in order confirmations, solely our Terms and Conditions shall apply, even failing our explicit contradiction to those of the Customer. We shall only recognise conflicting terms and conditions of the Customer or such that differ from the present Terms and Conditions, if we explicitly notify such in written form. 1.2 Our quotations shall be subject to change. Where an order is to be considered a quotation, we shall be able to accept it within a period of 2 weeks. Contracts shall only be deemed formed upon our written confirmation of order. The same shall apply to subsidiary agreements of any nature. Subsidiary agreements shall only be operative upon written confirmation. 1.3 Should the Customer not agree with the above-mentioned mode of handling, it shall give immediate and explicit separate notification thereof - within 7 days. 1.4 For this event, we shall retain the right to refuse the order of the Customer, without it being possible to assert any claims whatsoever against us. 1.5 We shall retain all title and copyrights to documents, such as calculations, drawings etc. that are handed over to the Customer upon order placement. These documents shall not be rendered accessible to third parties, unless we give the Customer our express written consent to do so. Unless we accept the offer of the Customer within the deadline specified in 1.2, these documents shall be returned to us immediately. 1.6 Where the written form is required, telefax notification shall also suffice. 2. Prices and Conditions of Payment 2.1 Unless otherwise agreed in written form, our prices shall be ex-works (FCA Wölfersheim for extruded PE piping, spiral piping and special construction parts/FCA Mörfelden for the remaining product programme/subject to Incoterms 2000), excluding packaging and subject to the addition of the value added tax as required by law. Costs of packaging, dispatch, expenses, customs duties, taxation etc. shall be billed separately. 2.2 Payment shall be due within 30 days of the date of invoice. 2.3 Upon payment within 10 days of the date of invoice, we shall allow 2% discount. 2.4 The above-specified Terms and Conditions of Payment shall not apply to repair and leasing bills. These invoices shall be due for payment without deduction within 10 days of the date of invoice. 2.5 Failing payment within the payment term, interest shall be charged at 8% in excess of the basic interest rate. The right to assert greater damages shall be retained. 2.6 The right shall be retained to amend prices appropriately, given changes in the costs of wages, material and distribution for deliveries effected 3 months or more after the entering of contract. 2.7 We shall not be bound to accept cheques and bills of exchange. If they are accepted, they shall only be deemed as payment upon their redemption. Costs of redemption and discount charges shall be borne by the purchaser. 2.8 Acceptance certificates pursuant to DIN EN 10204-3.1 shall be billed at 25.00 EUR. 3. Delivery and Dispatch 3.1 We shall not be bound to our notification of delivery time, unless we have given our explicit assurance. 3.2 Compliance with the delivery time we specify shall require clarification of all technical issues and the Customer‘s due and proper satisfaction of obligations. The right to plead non-performance of contract shall be retained. 3.3 Where we have assured a delivery time as binding, our duty to deliver shall nevertheless cease to apply in cases of force majeure, measures taken by the authorities, operational disruption with us or with our suppliers, as well as always in the event of a failure to supply on the part of our suppliers. The purchaser shall be entitled to withdraw from the contract after having set a period of at least 2 weeks in written form as extension of the original term. February 2009 3.4 Should the Customer delay in acceptance or fault through violating other duties to involvement, we shall be entitled to compensation for the damages we thus incur, including any extra expenditure thus generated. The right to claim for further-reaching damages shall be retained. Where the above-specified situation is given, the risk of accidental loss or accidental deterioration of the purchased item shall pass to the Customer the moment the Customer defaults in acceptance or payment. 3.5 Further-reaching claims and rights of the Customer derived from default in delivery shall remain unaffected. 3.6 Dispatch shall take place at the risk of the purchaser. Transport and other insurance coverage shall only be supplied at the request and for the account of the purchaser. The risk of accidental loss or accidental deterioration of goods shall pass to the Customer upon dispatch of the consignment, at the latest upon their departure from the works/warehouse. This shall apply irrespective of whether the consignment is dispatched from the place of performance or irrespective of who bears the costs of freight. 3.7 We shall deliver pre-forms (injection moulded, formed from piping, segmented), fittings and pressure-proof puddle flanges (Mauerkragen) upwards of a net value of 1,000.00 EUR free of charge within Germany. We shall deliver PE-piping (extruded, solid walled up to a diameter of 630 mm) upwards of a net value of goods of 3,000.00 EUR free of charge within Germany. Other deliveries shall generally be carried out freight collect, for partly-packed pallets we charge a lump-sum of EUR 55.00 net. For orders less than 125.00 EUR net value of goods, we shall charge 12.00 EURO net mark-up for small-volume purchases. 3.8 When goods are returned to us, said returned goods shall be in their original packaging and in a perfect re-sellable condition, i.e. neither soiled nor scratched and no older than one year. With such returns, we shall charge at least 25% of the value of the goods for restorage and a general processing fee of € 25,--. The return delivery shall be free of charge and subject to coordination of date with us and shall specify our order and invoice number. The return of piping and pre-form pipe moulds and segments shall be ruled out completely from any return. 4. Retention of Title 4.1 We shall retain title to all goods we deliver until payment of all our claims due to us from the business relations with the Customer placing the order. This shall also apply if the purchase price for certain consignments specified by the Customer placing the order has already been paid for. With open accounts, the items to which ownership is retained shall serve as security for our outstanding claims. This shall also apply for all future deliveries, even if we do not always make explicit reference thereto. We shall be entitled to take back the purchased item in the event of violation of contract on the part of the Customer placing the order. 4.2 Any processing or reforming of goods shall always be carried out for us as manufacturer, yet without any obligation on our part. Any handling or processing of goods to which we retain title that augments the value of said goods shall not entitle the Customer to any compensatory claims against us. 4.3 Should the goods to which we retain title be mixed or compounded with other items, so that our title thereto ceases to be valid, it is herewith agreed that our title to the item in question shall pass to us proportionately (value of the invoice). The Customer placing the order shall act as custodian of our (co)-ownership free of charge. Should the compounding be so effected that the item of the Customer is to be seen as the principle item, it is agreed that the Customer shall pass co-ownership to us proportionately and serves as custodian for the exclusive ownership or coownership for us. To secure our claim in respect of the Customer, the Customer shall assign to us those claims it derives from the compounding of the goods with landed property in respect to a third party; we herewith accept this assignment. 4.4 The Customer placing the order shall be entitled to process and sell the goods to which we retain title (conditionally sold goods) in conventional business transactions as long as the Customer is not in default. The Customer shall not be permitted to pledge the goods or transfer title thereto for security. Third party claims of the Customer for the conditionally sold items, based on whatever legal reason whatsoever, are now assigned to us to the extent of the final invoice price agreed upon (including applicable value added tax). In the event of processing, assignment shall be proportional to the amount of the invoice. Until further notice, we herewith authorise the Customer placing the order to collect the claims assigned to us for its own account in its own name. Our authority to collect the claims ourselves shall not be affected hereby. We shall, however, not collect the claims as long as the Customer continues to meet his obligations to payment from the collected proceeds and in particular for as long as the Customer has not filed for insolvency proceedings or has ceased payment. At our request, the Customer shall disclose the assignment and the retention of title and provide us with the necessary information and documents. The Customer shall also be bound to do so, without any specific request being made, if a third party for its part renders the assignment of the Customer‘s claims dependent upon its own approval. 4.5 The Customer shall be obliged to advise any interested third party of our claim to title, for as long as this still lawfully exists, and to inform us by providing us with a copy of the attachment protocol should a third party have levied execution against the goods. We shall be obliged to choose to release the title retained at the request of the Customer, where the value continuously exceeds the claims by 25% and more. Notwithstanding this, the title shall only pass to the Customer after the full value of the goods has been paid for, as well as any ancillary costs, such as freight and insurance and, with bills of exchange, upon their redemption. We shall not guarantee that in cases of non-acceptance or non-encashment of the bill of exchange, protest shall be filed in good time. Our assertion of the retention to title and attachment of the item for delivery shall not be considered as any rescission of contract. V
Page 1 and 2: Export price list Valves, geotherma
Page 3 and 4: Export price list 2009 General info
Page 5: Overview discount groups Discount g
Page 9 and 10: February 2009 Product ndex Hand ope
Page 11 and 12: Art.-Grp. DN February 2009 Pressure
Page 13 and 14: Art.-Grp. DN February 2009 PVC-U EP
Page 15 and 16: Art.-Grp. DN February 2009 Globe co
Page 17 and 18: Art.-Grp. DN February 2009 Art.-no.
Page 19 and 20: Positioner, electro-pneumatic Febru
Page 21 and 22: Level switch Nivex type 600 Discoun
Page 23 and 24: Flange connection DN = Art.-no. €
Page 25 and 26: DN = Art.-no. Art.-Grp. Art.-Grp. W
Page 27 and 28: PVC-U EPDM FKM Butterfly valve type
Page 29 and 30: * disc * disc Lug type with lever P
Page 31 and 32: PVC-U EPDM FKM Butterfly valve type
Page 33 and 34: DN = Art.-no. February 2009 Flange
Page 35 and 36: DN = Art.-no. February 2009 Thread
Page 37 and 38: Art.-Grp. D N-/ SO-mounting set DN=
Page 39 and 40: February 2009 Flange connection PVC
Page 41 and 42: February 2009 Flange connection EPD
Page 43 and 44: February 2009 Flange connection DN
Page 45 and 46: February 2009 PVC-U EPDM Art.-Grp.
Page 47 and 48: DN = Art.-no. Art.-Grp. February 20
Page 49 and 50: DN = Art.-no. Art.-Grp. DN = Art.-n
Page 51 and 52: February 2009 Socket connection EPD
Page 53 and 54: Art.-Grp. Art.-Grp. DN = Art.-no. 1
Page 55 and 56: February 2009 EPDM Art.-Grp. 552 00
Page 57 and 58:
February 2009 Type V 91: spigot end
Page 59 and 60:
Art.-Grp. DN Art.-Grp. DN February
Page 61 and 62:
Art.-Grp. February 2009 Spigot ends
Page 63 and 64:
Art.-Grp. February 2009 Spigot ends
Page 65 and 66:
Art.-Grp. DN February 2009 Spigot e
Page 67 and 68:
February 2009 PVC-connection with P
Page 69 and 70:
February 2009 PVC-connection with P
Page 71 and 72:
Connection with cement or welding s
Page 73 and 74:
Accessories for flow meter types M
Page 75 and 76:
Special scales for flow meters type
Page 77 and 78:
Type Art.-no. February 2009 PVC-U E
Page 79 and 80:
February 2009 Weld-on adapter type
Page 81 and 82:
Art.-Grp. Art.-Grp. February 2009 F
Page 83 and 84:
Type Connenction [mm] d=Art.-no. Fe
Page 85 and 86:
Sensor cable February 2009 Leakage
Page 87 and 88:
Accessories for pneumatic actuators
Page 89 and 90:
Spare parts / Wear parts Discount g
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
February 2009 New FRANK GET-System
Page 97 and 98:
Accessories for geothermal probes F
Page 99 and 100:
Manhole type 1, probe connection OD
Page 101 and 102:
Manhole type 2 February 2009 Factor
Page 103 and 104:
Modular plastic brine manifold type
Page 105 and 106:
Accessories for modular plastic bri
Page 107 and 108:
Modular brass brine manifold 1 ½
Page 109 and 110:
1 ¼“ brine manifold for geotherm
Page 111 and 112:
Reducers njection moulded, with emb
Page 113 and 114:
End caps njection moulded, with emb
Page 115 and 116:
Adapter elbows 90° njection moulde
Page 117 and 118:
Welding technology Electro fusion c
Page 119 and 120:
Electro fusion control box February
Page 121 and 122:
Accessories for electro fusion cont
Page 123 and 124:
Accessories for electro fusion cont
Page 125 and 126:
Butt welding machine for constructi
Page 127 and 128:
Tools and accessories February 2009
Page 129 and 130:
Butt welding machine for workshops
Page 131 and 132:
FRANK welding extruder February 200
Page 133 and 134:
Accessories for FRANK welding extru
Page 135 and 136:
Hot gas welder and accessories Febr
Page 137 and 138:
FRANK puddle flange The problem Pro
Page 139 and 140:
FRANK puddle flange Sealing up to 1
Page 141 and 142:
Notes: February 2009 133
Page 143 and 144:
PLASTIC VALVES Low weight. High res
show all

Export price list - Frank GmbH

Create successful ePaper yourself

Delete template?

Save as template?