DISCOVERY SCIENTIFIC Biotechnology - About us

About us News & Special offer Products Contact & Order Site Map Home 

Filter Tips 

Pipet Tips 

Gel Loading Tips & Pipettors 

PCR Tubes & Plates 

Centrifuge Tubes 

Rack Systems 

Cryoproducts 

Autoradiography 

DNA Workstation Hybridisation 

Documentation 

Electrophoresis 

Dry Block Heat & Water Bath 

Table- and Mini-Centrifuges 

Rotator, Vortexer & Shaker 

Nylon Wool & PAP PEN 

Microparticles 

Top of Page 

© Copyright Dicovery Scientific 2007 

Products for 

Biotechnology 

Our Product Range includes: 

Filter Tips 

Pipet Tip 

Gel Loading Tip 

PCR Tubes and Plates 


Rack Systems 

Cryoproducts 


DNA-Workstation & Hybridisation 


Dry block heat bath 

Mini Centrifuges 

Rotator & Vortex Mixer 



DISCOVERY SCIENTIFIC INC. 

Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 

Print version 

| Terms & Conditions | Imprint


Contact 

Order 

Terms 

Fax form 

Impressum Terms & Conditions 

Top of Page 


Print version 

1) The following terms are valid for all deliveries, except other conditions are agreed in written form. 

2) Products 

All product specifications are subject to change without notice. Our products are described as accurate as 

possible, but design improvements require occasional changes. 

3) Prices 

All prices are in Euro exclusive of VAT, which will be added to German customers and customers from 

member states of the EEC for the case, that the VAT identification no is not provided. Payments are 30 

days net. A late payment interest charge of 4% over the discont of the Deutsche Bundesbank will be 

added. All prices are subject to change without notice. 

4) Payment conditions 

30 days net. We reserve the right to request prepayment against proforma invoice for new customers and 

not established accounts. 

5) Payment options 

By cheque drawn on a german bank, by wire transfer to our bank and account as indicated on the 

invoice. All bank charges are subject of the purchaser. 

6) Minimum orders 

We accept all orders independently of any minimum value. For foreign orders outside Germany we add a 

handling charge of 13 Euro if the order value is under 300 Euro net. 

7) Shipments 

Shipments are ex works Muehlhausen. Shipping charges will be prepaid and added to the invoice. 

Shipments will be despatched on most economical method by express courier, air mail, air freight or other 

methods, depending on volume and destination of the order. Claims for lost or damaged products are the 

responsibility of the purchaser and must be reported within 8 working days. If the customer establishes 

that any goods are defective, the seller has the option, to repair the defective good, to replace with a 

similiar product or allow the customer credit their invoice value. 

8) Returns 

No returns are accepted without prior approval by G.Kisker. G.Kisker is not liable for material which 

becomes defective through improper storage or handling 

9)Product liability 

All products are for in vitro research only and not intended to be used for diagnostic or therapeutic 

applications. 

10) Retention of Title 

All products remain the property of G. Kisker until the payment has been remitted in full. 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 



Contact 

Order 

Terms 

Fax form 

Impressum 

Top of Page 


Impressum Headquarter: 

Discovery Scientific Inc. 

Martin Peet 

940 B West 15th Avenue 

Vancouver, BC, V5Z 1R9 

Canada 

phone: (778) 899-5855 

(604) 736-3479 (Fax) 

e-mail: martin.peet@discoveryscientific.com 

Internet: www.discoveryscientific.com 

Web Design 

marketing & consult gmbh 


G.Kisker GbR 

Produkte für die Biotechnologie 

Dipl.oec.troph. Gerlinde Kisker 

P.O. Box 1329 

48543 Steinfurt 

Germany 

Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

phone: +49 2551-864310 

fax: +49 2551-864312 

e-mail: contact@kisker-biotech.com 

Internet: www.kisker-biotech.com 

Print version 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Quali - Tips, sterile Filter Tips in racks 

Our hydrophobic filter tips eliminate aerosols completly. The tips are 

sterilized by gamma-radiation and are important to avoid crosscontaminations 

of sample fluids or vapors from contacting the pipettors 

shaft. Especially important is theuse of filter tips with all PCRtechniques 

, where contamination with unwanted DNA through the 

pipettor can lead to wrong results. Also the filter tip protects the 

pipettor, if you are handling with radioactice, corrosive or biohazardous 

samples. The tips have the beveled form for absolutly precision and 

are certified DNase-, RNase- and pyrogen free! 

Note: PCR is an US-Patent of Hoffmann-La-Roche 

Packsizes: 

10 racks with 96 tips/rack: A300 - A300SX - A250S - A400S - A20S - 

A50S - A1000S - A150S - A200S - A350S 

5 racks with 204 tips/rack: A300S Long 

10 racks with 100 tips/rack: A1000S 

12 racks with 96 tips/rack: A1250MAS 

1 unit = 10x96 

tips 

racked 

Length in 

cm 

1-4 units 5-9 units 10 units 

Print version 

Cat. # Volume Compatibility Price [USD] Price [USD] Price [USD] 

A300S 0,1 - 10µl Gilson P2 P10 3,20 72.70 66.50 62.90 

A300SX 0,1 - 10µl Gilson P2 P10 4,60 72.70 66.50 62.90 

A300SLang 0,1 - 10µl Gils.P2,P10,Epp. 5,70 121.26 

A250S 0,1 - 2,5µl Epp.0,1-2,5µl,P2 3,20 121.26 

A400S 0,5 - 10µl Eppend.0,5-10µl 4,60 72.70 66.50 62.90 

A20S 0,5 - 20µl Universal 5,05 72.70 66.50 62.90 





A350S 1,0 - 300µl Finn,Capp 5,24 72.70 66.50 62.90 

A1000S 

A1250MAS 

100 - 

1000µl 

100 - 

1000µl 

Universal 7,70 75.30 70.40 64.40 

Matrix 15 - 1250 µl 7,80 127.27 

Quali - MAXYMUM RECOVERY Filter-Tips with ultra-smooth surface, sterile in racks 

With the emergence of PCR, HTS and DNA-Sequencing reliable sample preparation and delivery 

methods have become a critical issue. MAXYMUM RECOVERY Tips show much better results 

than standard tips, fluid retained by the MAXYMUM RECOVERY tip is 5 - 6 fold lower than any 

other tip tested. MAXYMUM RECOVERY Tips are produced through a modification of the original 

pp resin and do not include any silicons or additives. The Tips are certified to be free of DNase-, 

Rnase- and pyrogen 

* Hydrophobic, additivfree Filtertips to eliminate Aerosols 

* Maximum DNA yealds, minimum DNA Denaturation 

* Highest prezision by ultra smooth , occlusions free surfaces 

* cost reduction of 10-15% through getting an extra number of pipettings and saving of enzymes 

and other reagents. 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

1 unit = 10x96 Tips in racks 1-4 units 5-9 units 10 units 

Cat. # Volume compatibility Price [USD] Price [USD] Price [USD] 

A300S-MR 0,1 - 10µl Gilson P2, P10 90.09 85.66 81.37 

A300SX-MR 0,1 - 10µl Gilson P2, P10 95.81 91.38 85.66 

A400S-MR 0,5 - 10µl Eppend.0,5-10µl 90.09 85.66 81.37 

A20S-MR 0,5 - 20µl universal 90.09 85.66 81.37

A100S-MR 1,0 - 100µl universal 90.09 85.66 81.37 

A200S-MR 1,0 - 200µl universal 90.09 85.66 81.37 

A1000S-MR 100 - 1000µl universal 95.81 90.09 87.23 

Quali - Tips, Filter Tips in bags 

These filter tips feature same characteristics as above, but are not sterilized by gamma-radiation. They are 

produced and packed under clean room conditions and are also certified DNase-, RNase- und pyrogen 

free. If necessary the filter tips can be sterilized by autoclaving without damaging the filter using following 

procedure: at 120°C under 15 PSI for 10-15minutes. Do not exceed as excess exposure to autoclaving 

heat may cause decreased structural integrity. 

1 unit = bag / 1000 1-4 units 

Cat. # Volume Compatibility Price [USD] 

5 -9 

units 

Price 

[USD] 

A30UB 0,1 - 10µl Gilson,P2,P10,Bioht 69.90 66.30 60.50 

A30XUB 0,1 - 10µl extended Gilson,P2,P10,Bioht 69.90 66.30 60.50 

A40UB 0,5 - 10µl Eppend. 0,5-10µl 69.90 66.30 60.50 

A20UB 0,5 - 20µl Universal 69.90 66.30 60.50 





A350UB 1,0 - 350µl Finn,Capp 69.90 66.30 60.50 

A1000UB 100 -1000µl Universal 73.80 69.90 64.60 

VALUE LINE, sterile filtertips in racks 

DNase-, RNase-, Pyrogen- and metall free, hydrophobe, additive free filtertips to eliminate 

aerosoles, conformity confirmed, graduated at 10, 50 and 100µl for the 20, 50, 100 und 200µl tip 

10 

units 

Price 

[USD] 

1VE = 10 x96 Tips 1-4 units 5 -9 units 10 units 

Kat. # Volume compatibility Price [USD] Price [USD] Price [USD] 

VL300S 0,1 - 10µl Gilson P2, P10, Biohit,Rainin EDP-2 63.00 60.00 57.00 

VL400S 0,5 - 10µl Eppend. 0,5-10µl, Socorex,Nichirio 63.00 60.00 57.00 

VL20S 0,5 - 20µl Eppend. Gilson, Bioh Brand,Socorex 63.00 60.00 57.00 




VL1000S 100 - 1000µl Eppend. Gilson, Bioh Brand,Socorex 67.00 63.00 60.00 

Quali - Robotic Filter Tips 

Our robotic filter tips are made to exact dimensions of OEM tips to ensure automation compatibility. The robotic filter 

tips are offered in different volume sizes for Beckman Biomek and Zymark robotors. They ensure an airtight seal to 

your robotic system for accurate dispensing and are as our other filter tips certified DNase-, RNase- and pyrogen 

free. The robotic filter tips are "low retention" tips, to make sure, that full amounts of samples like DNA or Proteins are 

captured for more reliable results. 

Cat. # Volume Compatibility packaging 

Price 

[USD] 

ABB-20S 20µl Beckman Biomek 50 Racks á 96 tips 693.55 

ABB-50S 50µl Beckman Biomek 50 Racks á 96 tips 693.55 

ABB-180S 180µl Beckman Biomek 50 Racks á 96 tips 693.55

Top of Page 


ABFX-30S 30µl Beckman FX 50 Racks á 96 tips 614.90 



Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Quali - Micro Volume Tips 

For many application, especially in molecular biological and immunological 

applications the quality and accuracy of a tip is very important. With our tips you 

get the highest available quality and reproducability for your experiments: 

* the chemistry: 99,9% pure polypropylen, metall free, and free of lubricants, dyes 

or fillers 

* the production: in high diamond polished forms without use of contaminating 

releasing fluids during the manufactoring, which results in a transparent product 

and reduces the adherance of liquid to the surface 

* the tip-form: exact fitting to pipettes - exact tip orifice and transparency. 

* the biology: DNase-, RNase-, pyrogen free 

* the bevel: the angel on our beveled tips reduces the surface area of the tip 

orfice with the receiving vessel. This angel combined with an ultra-thin orfice 

reduces the effect of liquid samples creeping up the side of the tip ( capillary 

effect). By reducing this capillary effect our tips dispense more accurate. 

* Compatibility: 

The universal grip design and the flexible material with a serie of bands produce 

a positive seal. 

GC.TIP 0,1-10µl: Gilson P2 " P10, Eppendorf Res./Ref. 2,5µl & 10µl, Finn 10µl, 

Socorex 2 and 10µl Rainin 10µl Biohit Multichannel 10µl, Benchmate 2 " 10µl, 

Denville DP-2/DP-10 

EC.TIP 0,5-20µl: Eppendorf Res./Ref. 10µl, Brand 2-20µl, Fin 10µl, Biohit 

Multichannel 10µl 

CA.TIPS: Cap 16-Kanal 0,2-20/0,5-10/5-50µl 

1-9 VE 10 - 19 VE 20+ VE 

Cat. # / packaging Volume / color Price [USD] Price [USD] Price [USD] 

GC.TIPS.B / bag-1000 tips 0,1-10µl / klar 18.90 17.65 16.80 

GC.TIPS.R/ Rack-10x96 0,1-10µl / klar 36.00 34.75 33.00 

GC.TIPS.ExB / bag-1000 tips 0,5-10µl / klar 20.74 19.59 19.02 

GC.TIPS.ExR /Rack-10x96 0,5-10µl / klar 41.33 38.75 36.47 

EC.TIPS.B / bag- 1000 tips 0,5-20µl / klar 20.74 19.59 18.73 

EC.TIPS.R / Rack- 10x96 0,5-20µl / klar 41.33 38.75 36.47 

CA.TIPS.R30 / Rack- 50x384 0,5-30µl / klar 3,539.25 

CA.TIPS.R60 / Rack- 50x384 0,5-60µl / klar 3,539.25 

Quali - Micro Volume Tips and beveled Tips 

For many application, especially in molecular biological and immunological 

applications the quality and accuracy of a tip is very important. With our tips you 

get the highest available quality and reproducability for your experiments: 

* the chemistry: 99,9% pure polypropylen, metall free, and free of lubricants, dyes 

or fillers 

* the production: in high diamond polished forms without use of contaminating 

releasing fluids during the manufactoring, which results in a transparent product 

and reduces the adherance of liquid to the surface 



* the bevel: the angel on our beveled tips reduces the surface area of the tip 

orfice with the receiving vessel. This angel combined with an ultra-thin orfice 

reduces the effect of liquid samples creeping up the side of the tip ( capillary 

effect). By reducing this capillary effect our tips dispense more accurate. 

* Compatibility: the beveled tips are fitting to a wide range of pipettors and ideal 

for labs with multiple brands of pipettors. 

The universal grip design and the flexible material with a serie of bands produce 

a positive seal. 

GC.TIP 0,1-10µl: Gilson P2 " P10, Eppendorf Res./Ref. 2,5µl & 10µl, Finn 2µl, 

Biohit Multichannel 10µl, Benchmate 2 " 10µl, Denville DP-2/DP-10 

EC.TIP 0,5-20µl: Eppendorf Res./Ref. 10µl, Fin 2µl, Biohit Multichannel 10µl 

T005: Finn Multichannel 50-300µl, Capp Aero 50-300µl, Biohit Multichannel 50- 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version

250µl 

1-9 VE 10-19 VE 20+ VE 


T002B / bag-1000 tips 1-200µl / yellow 17.02 16.30 15.59 

T002B.R / rack-10x96 1-200µl / yellow 41.61 39.33 36.47 

T005B / bag-1000 tips 1-300µl / yellow 21.31 20.59 19.88 

T005B / rack-10x96 1-300µl / yellow 44.47 42.19 39.90 

T004B / bag-1000 tips 100-1000µl / blue 21.31 20.59 19.88 

T004BR / Rack-10x100 100-1000µl / blue 51.19 47.91 43.62 

Sterile Tips, "bevelled" 

Many applications require sterile techniques. Highest quality and passform garant 

reproducability of your experiments 

99,9% pure polypropylene, metal free and free of additives 

exact passform - exact tip opening and transparency 

Low Retention for for ultimate in precision 

DNase-, RNase-and pyrogen free 

Cat. # / packaging Volume / color Pack.unit Price [USD] 

T002B.R-S / Rack-10x96 1-200µl / klar 10 Racks á 96 Tips 47.05 

T004B.R-S / Rack-10x100 100-1000µl / klar 10 Racks á 96 Tips 57.06 

Pipett Tips - Eppendorf fit 

These Tips are 100% compatibel with Eppendorf-Tips in the corresponding volume and can be used without 

problems in Eppendorf Racks. Highest quality and passform garant reproducibility of your experiments 




Graduation for confirmation pipettor volume 

fitting to the Eppendorf workstation. 

Cat. # / packaging Volume / color Pack.unit 

Price 

[USD] 

ETY02.B 1-200µl / yellow 2 x 500 tips 21.24 

ETY02.R 1-200µl / yellow 10 racks of 96 tips 42.83 

ETB04.B 100-1000µl / blue 2 x 500 tips 24.17 

ETB04.R 100-1000µl / blue 12 racks of 96 = 1.152 tips 68.50 

Quali - Tips, low retention tips ( fomerly siliconized Tips ) 

Our ´Low Retention´ tips replace the formerly siliconized tips. They are made from high pure 

polypropylene. The 20µl " 1000µ siliconized tips are beveled, to increase the precision. The ´Low 

Retention´ is based on a a new technology production, where no silicone is added during or after 

the production, which could disturb in any experiments. This process causes extremly smoth tips 

and minimises liquid retention. The result is 60% better as with siliconized tips. This product gives 

the confidence, that the full amount of DNA, enzymes or proteins is captured for testing purposes 

and provides more reliable results. 

The tips are fully autoclavable and certificated DNase-, RNase-, pyrogen- and metall free. 

Compatibility: the "bevelled" Tips fit to a wide range of pipettors and are very useful for labs using 

different brands of pipettors in same lab. 

GC.TIP 0,1-10µl: Gilson P2 " P10, Eppendorf Res./Ref. 2,5µl " 10µl, Finn 2µl, Biohit Multichannel 

10µl, Benchmate 2 " 10µl, Denville DP-2/DP-10/DP-8-10 


T002/T004: universal fit for all known pipettors 

T005 (300µl) Finn Multichannel 50-300µl, Capp Aero 50-300µl, Biohit Multichannel 250µl 

1-9 VE 10-19 VE 20 + VE 


GC.TIPS.BSi/bag-1000 tips 0,1-10µl / clear 26.88 25.67 23.60 

GC.TIPS.RSi/rack-10x96 0,1-10µl / clear 50.84 47.91 41.68 

EC.TIPS.BSi/bag-1000 tips 0,5-20µl / clear 27.03 25.67 23.60 

EC.TIPS.RSi/rack-10x96 0,5-20µl / clear 50.84 47.91 41.68

T002BSi/ bag-1000 tips 1-200µl / clear 27.03 25.67 23.60 

T002B.RSi / rack-10x96 1-200µl / clear 50.84 47.91 41.68 

T004BSi / bag-1000 tips 100-1000µl / clear 28.53 27.03 25.60 

T004BRSi /Rack-10x100 100-1000µl / clear 59.92 55.77 54.20 

Quali - Standard Tips, bevelled 

With this product line we offer very economical tips for standard applications. The new tip VL700G 

could be improved in quality and shows now graduation. Standard yellow tips are offered as bulk 

packs only in bags of 1000 Tips and in racks. The blue tips are extra long (86mm), which allows to 

sample manipulation in deeper tubes. 

The Tips are compatible to: 

VL700G: Gilson P20,P100,P200, Nichirio, Socorex, Biohit Proline a.o. 

VL004G: Gilson P1000, Biohit Proline, Eppendorf Res./Ref. 1000µl, Biohit, Socorex, Brand a.o. 

1 Unit = 1000 Tips 1-19Units 20 Units+ 50 Units+ 

Cat. # Volume / Color Price [USD] Price [USD] Price [USD] 

VL700G 1- 200µl / yellow 8.50/bag of1000 8.08 7.08 

VL700GR 1- 200µl / yellow 35.75/10x96 32.89/10x96 30.00/10x96 

VL004G 200- 1000µl / blue 10.44/bag of 1000 9.94 8.94 

VL004SHO 200- 1000µl / blau, short-standard 10.44/bag of1000 9.94 8.94 

StackRacks - Place Savers 

Save time and place. Our most used tipe are now also available as StackRacks an. The used tips are 

"bevelled“, autoclavable, certified DNase-, RNase-, pyrogen free and very useful for multichannel pipettors. 

Easy to use: 5 Racks with 96 tips each are stacked together. Use the first one and find next ready to use 

below. 

Cat. # Volume / Color Unit Price [USD] 

GC.TIPS.STK 0,1-10µl / clear 10 stacks with 5 racks = 4,800 tips 199.00 

T200-Y-STK 1- 200µl / yellow 10 stacks with 5 racks = 4,800 tips 169.00 

Quali - Robotic Tips, clear for Beckmann Biomek 1000 und 2000 

Our robotic tips are made to exact dimensions of OEM tips to ensure automation compatibility. Like all our 

tips, our robotic tips ensure an airtight seal to your robotic system for accurate dispensing. 

These tips are certified DNase-, RNase- and pyrogen free. 

Low Retention (Typ -MR) for best pipetting results, highest prezision by ultra smooth , occlusions free 

surfaces. 

Cat. # tip type packaging Price [USD] 

RB-B20 20µl, Beckman Biomek 10 bag á1000 Tips 235.95 

RB-R20 20µl, Beckman Biomek 50 Racks á96 Tips 284.57 

RB-RS20 20µl, Beckman Biomek 50 Racks á96 Tips, steril 356.07 







RBW-R250 250µl, wide bore, Beckman Biomek 50 Racks á96 Tips 284.57 

RBW-RS250 250µl, wide bore, Beckman Biomek 50 Racks á96 Tips, steril 336.05 



RB-B20-MR 20µl, Beckman Biomek 10 bag á1000 Tips 370.37

RB-R20-MR 20µl, Beckman Biomek 50 Racks á96 Tips 341.77 

RB-RS20-MR 20µl, Beckman Biomek 50 Racks á96 Tips, steril 413.27 

RB-B50-MR 50µl, Beckman Biomek 10 bag á1000 Tips 270.27 



RB-B250-MR 250µl, Beckman Biomek 10 bag á1000 Tips 273.13 



Quali - Roboter Tips for Beckman Biomek FX /NX, 3000 und Multimek AP 96 

Our robotic tips are made to exact dimensions of OEM tips to ensure automation compatibility. Like all our 

tips, our robotic tips ensure an airtight seal to your robotic system for accurate dispensing. 

These tips are certified DNase-, RNase- and pyrogen free. 

Low Retention (Typ -MR) for best pipetting results, highest prezision by ultra smooth , occlusions free 

surfaces. 

Cat. # tip type Pack.unit Price [USD] 

RBFX-R10 10µl, Beckman Biomek FX 50 Racks á96 Tips 294.58 

RBFX-RS10 10µl, Beckman Biomek FX 50 Racks á96 Tips steril 354.64 


RBFX-RS20 20µl, Beckman Biomek FX 50 Racks á96 Tips, steril 313.17 





RBFX-WBR250 250µl, wide bore,Beckman Biomek FX 50 Racks á96 Tips 294.58 

RBFX-WBRS250 250µl, wide boreBeckman Biomek FX 50 Racks á96 Tips, steril 354.64 

Low retention 

RBFX-R20-MR 20µl, Beckman Biomek FX 50 Racks á96 Tips 327.47 

RBFX-RS20-MR 20µl, Beckman Biomek FX 50 Racks á96 Tips, steril 398.97 





Filter tips - sterile 

ABFX10S 10µl, Beckman Biomek FX 50 Racks á96 Filtertips, steril 627.77 

ABFX20S-MR 20µl, Beckman Biomek FX 50 Racks á96 Filtertips, steril 656.37 



ABFXWB165S 165µl, Beckman Biomek FX, wide bore 50 Racks á96 Filtertips, steril 599.17 

Quali - Roboter Tips for Beckman Biomek FX /NX, 3000 and Multimek AP 384 

384 / 1536 well compatibel 

FP = Fine Point, Ex = extra long 

"Low Retention" (Typ - MR) on request 

Cat. # tip type Pack.unit Price [USD] 

RBFX-R384 0,5-30µl, Beckman Biomek FX 50 Racks á384 Tips 3.560.70 

RBFX-RS384 0,5-30µl, Beckman Biomek FX 50 Racks á384 Tips, steril 3.846.70 

RBFX-R384FP 0,5-30µl, Fine Point, Beckman Biomek FX 50 Racks á384 Tips 3.560.70 

RBFX-RS384FP 0,5-30µl, Fine Point, Beckman Biomek FX 50 Racks á384 Tips, steril 3.846.70

RBFX-R384FP-Ex 0,5-45µl, Fine Point, Ex, Beckman Biomek FX 50 Racks á384 Tips 4.268.55 

RBFX-RS384FP-Ex 0,5-45µl, Fine Point, Ex, Beckman Biomek FX 50 Racks á384 Tips steril 4.568.85 

RBFX-R384FP-50 0,5-50µl, Fine Point, Ex, Beckman Biomek FX 50 Racks á384 Tips 3.846.70 

RBFX-RS384FP-50 0,5-50µl, Fine Point, Ex, Beckman Biomek FX 50 Racks á384 Tips steril 4.132.70 

Quali - Roboter - Tips for Tecan TEMO, Aquarius, Genmate and Zymark RapidPlate 

Cat. # Volume Pack.unit Price [USD] 

RT-R50 50µl 50 Trays á96 Tips 284.57 

RT-RS50 50µl 50 Trays á96 Tips, steril 313.17 


RT-RS100 100µl 50 Trays á96 Tips, steril 313.17 


RT-RS200 200µl 50 Trays á96 Tips steril 313.17 

ART-R50S Filter tips 50µl 50 Trays á96 Tips steril 570.57 



Quali - Roboter - Tips for Perkin-Elmer (Packard) PlateTrack, MiniTrack and 

Evolution P-3 

Cat. # Volume Pack.unit Price [USD] 

RBM-R20 20µl 50 Racks á96 Tips 323.18 

RBM-RS20 20µl, steril 50 Trays á96 Tips, steril 368.94 

RBM-R50 50µl 50 Trays á96 Tips 284.57 

RBM-RS50 50µl, steril 50 Trays á96 Tips, steril 336.05 

RBM-R200 200µl 50 Trays á96 Tips 284.57 

RBM-RS200 200µl, steril 50 Trays á96 Tips steril 336.05 

ABM-R20S Filter tips 8µl , steril 50 Trays á96 Tips steril 600.60 

ABM-R30S Filter tips 30µl, steril 50 Trays á96 Tips steril 664.95 

ABM-R180S Filter tips 180µl , steril 50 Trays á96 Tips steril 600.60 

Quali - Roboter Tips, conductiv (black) for Biomek FX / NX with SPAN-8-head 

conductive tips for other robotic systems available on request

Top of Page 


Cat. # Tip type Pack.unit Price [USD] 

RBK-SP-20 20µl 50 Racks á96 Tips 732.16 

RBK-SP-S-20 20µl , steril 50 Racks á96 Tips, steril 770.77 

RBK-SP-50 50µl 50 Racks á96 Tips 732.16 

RBK-SP-S-50 50µl , steril 50 Racks á 96 Tips, steril 770.77 

RBK-SP-250 250µl 50 Racks á 96 Tips 732.16 

RBK-SP-S-250 250µl , steril 50 Racks á96 Tips, steril 770.77 

RBK-SP-FS-20 20µl , Filter tips , steril 50 Racks á96 Filtertips, steril 899.47 



Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Print version 

Quali - Tips, Gel -Loading Tips 

The following capillary tips are useful for loading gels as well as for recovery of samples from small orifice containers or 

tubes. 

Gel-Saver Tip I: 

0,5-10µl, compatibility: Eppendorf 0-5-10µl, Gilson P2, Oxford 

Benchmate orifice o.d. 0,25mm, lenght of flexible capillary tip 22mm, total 

lenght 62mm 

Cat. # Packaging Price [USD] 

GSI025 1Rack á 204 tips 54.20 

Gel-Saver Tip II: 

1-200µl, compatibility: Eppendorf, Gilson, Finn, Biohit, orifice o.d. 

0,54mm, lenght of flexible capillary tip 25mm 

Cat. # Packaging Price [USD] 

GSI054B 1bag á 1000 tips 62.78 

GSI054R 5 Racks á 204 tips 85.66 

Cell Saver Tips 

The Cell Saver Tips have an extra large tip orfice, to make the transfer of sensitive cells possible without 

damaging the cells. When using standard or "bevelled" tips, hybridomas, hepatocytes or macrophages 

could be damaged. Also the "DNA-shearing" of genomic DNA can be reduced. Cell Saver tips are also 

helpful when pipetting high viscous fluids. The clear Cell Saver tips are supplied in bags of 1000 tips or 

racks on request. 

The do fit to all common pipettors and are DNase-, RNase- and Pyrogen free. 

1 VE = 1000 Tips 1- 4 units 5 + units 

Cat. # Volume Pack.unit Price [USD] Price [USD] 

CSP250B 1 - 200µl 1 Bag á 1000 21.45 20.31 

CSP250B.RS 1 - 200µl 10 Racks á 96 55.63 52.77 

CSP100B 100 - 1000µl 1 Bag á 1000 26.03 24.74 

CSP100.RS 100 - 1000µl 10 Racks á 100 84.37 79.94 

FlexTop Tip, 200µl Spitze 

This tip features a unique combination of a very thisn wall and ultra fine 

tip point. A flexible tip collar offers a particulary good fit on most 200 

microliter pipettes including multi channel pipettes. 

Cat. # packaging Price [USD] 

FT-1000 1 bag á 1000 85.66 

FT-96 6 racks á 96 71.36 

Pasteur Pipettes 

unbreakable, no risk of violation 

made from transparente polypropylene 

smooth, elasic sucking ball 

exact and reproducable size of drops 

präcise tip form 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

Cat. Nr. Volume Length Drop volume number of drops Pack.unit Price [USD] 

GPP-0.2 200 µl 130 mm 30 µl 33 / ml 500 25.60 

GPP-1.0 1 ml 150 mm 33 µl 30 / ml 500 21.31 

GPP-1.2 1.2 ml 64 mm 40 µl 24 / ml 500 27.03 

GPP-3G 3 ml graduiert 155 mm 50 µl 20 / ml 500 18.45 

GPP-3.0 3 ml 150 mm 33 µl 33 / ml 500 21.31 

GPP-10S 10 ml kurz 170 mm 56 µl 18 / ml 200 22.74 

GPP-10L 10 ml lang 300 mm 45 µl 22 / ml 100 42.76 

Denville-Pipettes "XL3000i" 

Eight modells cover all volumes from 0,1µl to 10ml. A continuosly adjustable volumeter with digital 

readout allows simple and accurate dispensing. The robust construction along with the low thermal 

coefficient of the body of each XL3000i will prevent hand heat affecting sample measurements and 

reproducibility, even in prolonged usage. Being lighter as many other similiar pipettes, they are 

even more comfortable to hold and operate for extended periods - even in the smallest hand. 

The XL3000i requires minimal maintenance and its precise. 

advantages: 

- classic profil, ergonomic design, comfortable hand gripp 

- continously adjustable 

- 20% light weighter as comparable models 

- liquid end autoclavable 

- Tip-ejector adjustable to use different tip brands 

- service-kit for recalibration inclusive 

Cat. # Description Accuracy Volume Price [USD] 

DP-2 P-2 1-Channel variable volume +/- 12,0 to 1,5 0,1 – 2µl 227.37 

DP-10 P-10 1-Channel variable Volume +/- 3,6 to 0,5 0,5 – 10µl 227.37 

DP-20 P-20 1-Channel variable Volume +/- 4,0 bis 0,5 2 – 20µl 213.07 




DP-5000 P-5000 1-Channal variable Volume +/- 0,6 bis 0,5 1000 - 5000µl 241.67 

DP-10ml P-10ml 1-Channel variable Volume +/- 2,5 bis 0,5 1000 - 10.000µl 314.60 

Denville-Multichannal Pipettes "XL3000i" mit variable Volume 

Denvilles XL3000i Multi-Channel Pipettes allow for comfortable pipetting by both right and left hand users. The 

plungers and ejector buttons are ergonomical located and operate smoothly. For comfortable pipetting in any 

direction, the tip manifold rotates 360°. The innovative ejector is curved, allowing the tips to be pushed off in 

steps, therefor reducing the amount of force required for ejection. 

The use of advanced, lightweight materials results in a pipette that will standup for constant use, yet is easy to 

hold, even during extended pipetting session. 

Advantages: 

- up to 20 % lighter than many similiar models 

- 360° rotating manifold 

- individual precision pistons ensure accuracy and reproducability 

- digital volume display 

curved ejector bar reduces the force required 

-rRecalibration tool included. 

Cat. # Description Accuracy Volume 

Price 

[USD] 

DP-8-10 8 - Channel manual +/- 8.0 bis 2,0 1 - 10µl 713.57 







Biohit-mLine Single Channel Pipettors with variable Volume Setting 

Advantages of Biohit-mLine Pipettors: 

* the most light working pipettor in the market

* correct sitting of pipett tip and extrem light throw off by patent tip system, minimum power needed for 

take off and trow off of the tips 

* complete autoclavable 

* fast delivery- and repairservice and 3-years warranty 

Cat. Nr. Description Volume Price 

[USD] 

00725020 1-Channel variable volume 0,5.-.10µl 313.17 

00725030 1-Channel variable volume 2 - 20 µl 298.87 

00720050 1-Channel variable volume 




10 - 

100µl 

20 - 

200µl 

100 - 

1000 µl 

500 - 

5000 µl 

298.87 

298.87 

298.87 

298.87 

00725600 Karussell-Stand for 6 m-Line Pipetten 127.27 

00725620 one for ALL, Linear Stand 84.37 

Biohit-mLine Multi Channel Pipettors with variable Volume Setting 

Advantages of Biohit-mLine Pipettors: 

* the most light working pipettor in the market 

* correct sitting of pipett tip and extrem light throw off by patent tip system, minimum power needed for 

take off and trow off of the tips 

* complete autoclavable 

* fast delivery- and repairservice and 3-years warranty 

Cat. Nr. Description Volume Price 

[USD] 







0,5.- 

.10µl 

5 - 100 

µl 

30 - 

300µl 

0,2.- 

.10µl 

5 - 100 

µl 

30 - 

300µl 

670.67 

656.37 

656.37 

770.77 

756.47 

756.47 

00725600 Karussell-Stand for 6 m-Line Pipetten 127.27 

00725620 one for ALL, Linear Stand 84.37 

Biohit - Pipettes 

The Biohit Proline Pipettes feature:* Precision, reproducable results and low weight * produced after DIN 

12650, conformity certified DIN 12600. selfe-calibrating, calibration free electronische Pipettes. fast 

delivery and repair service and two years warranty

Top of Page 


Biohit Proline EinChannelpipetten mit variabler volumeeinstellung 

Cat. Nr. Descrition Volume Price [USD] 

720005 1-channel variable Volume 0,1.-.2,5µl 264.55 

720000 1-channel variable Volume 0,5.-.10µl 250.25 

720080 1-channel variable Volume 2 - 20 µl 250.25 

720020 1-channel variable Volume 5 - 50µl 250.25 







Biohit Proline 1-Channel pipettes with Fixed volume 

Cat. Nr. Description Volume Price [USD] 

00722001 1-channel fix volume for 10µl(PCR) Tips 5 µl 135.85 

00722004 1-channel fix volume for 10µl(PCR) & 300µl Tips 10 µl 135.85 

00722010 1-channel fix volume 20 µl 135.85 







00722045 1-channel fix volume 1000µl 135.85 



Biohit Proline Multi channel Pipettes with variable Volume 

Cat. Nr. Description Volume Price [USD] 

00720210 8 - channel manual 0,5 - 10µl 521.95 

00720220 8 - channel manual 5 - 50µl 521.95 

00720240 8 - channel manual 50 - 300µl 521.95 

00720310 12-channel manual 0,5 - 10µl 636.35 

00720320 12-channel manual 5 - 50µl 636.35 



Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







IsoFreeze PCR-Rack 

A personel chiller PCR-rack filled with special gel 

maintains samples cool for around 3 hours under +4°C 

a contrasting temperature indikator with color change at 7°C 

an ideal tool by working with PCR-reagents, enzymes and other temperature sensitive substances on the 

bench 

useful for preparation of 0,2 ml PCR-tubes/-strips and PCR-plates. 

Print version 

Cat. # Description Unit Price [USD] 

KR-96 IsoFreeze PCR-Rack 2 racks with lid 69.00 

IsoFreeze PCR-SBS-Rack for automated Systems 


SBS-footprint useful for robotic systems 

maintains samples cool for around 2.5 hours under +4°C 

a contrasting temperature indikator with color change from geen to yellow at 7°C 

an ideal tool by working with PCR-reagents, enzymes and other temperature sensitive 

substances on the bench 

useful for preparation of 0,2 ml PCR-tubes/-strips and PCR-plates 

dimensions: 128 x 85 x 26 mm 


KR-96-SBS IsoFreeze PCR-SBS-Rack 2 racks with lid 79.00 

IsoFreeze Microtube-Rack 

A personel chiller MCT-rack filled with special gel 





useful for preparation of 24 x 0,5 - 1,5 - 2,0 ml microtubes 

Dimensions with lid: 70 x 105 x 64 mm 


KR-24 IsoFreeze MCT-Rack 1 racks with lid 82.50 

Quali - Tubes, Single PCR-Tubes: 0,2 ml without cap 

Ultra thin tubes for PCR 

manufactured in high polished moulds and absolutely free of lubricants, dyes, heavy 

metals or fillersforms 

certified DNase-, RNase- and pyrogen free. 

1 Unit=2 x 500 tubes 1-4 units 5-9units 10+Un. 

Cat. # Volume Color 

Price 

[USD] 

Price 

[USD] 

Price 

[USD] 

G001-NC 0,2 ml transparent 52.77 51.34 49.91 

1 Unit=20 x 500 tubes 1 units 

G001-NC-B 0,2 ml blue 564.85 

G001-NC-G 0,2 ml green 564.85 

G001-NC-O 0,2 ml orange 564.85 

G001-NC-R 0,2 ml red 564.85 

G001-NC-V 0,2 ml violet 564.85 

G001-NC-Y 0,2 ml yellow 564.85 

Quali - PCR Tubes, Single PCR Tubes 0,2 and 0,5 ml 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

Our PCR tubes and strip tubes are specifically designed for use in PCR 

machines and thermal cyclers. The tube walls are ultra thin and consistent, 

to ensure a fast temperature exchange beetween heatingsystem and sample, 

resulting in faster cycles. The ultrathin PCR tubes are made from high pure 

polypropylen in high polished moulds and are free of lubricants, dyes, heavy 

metals or fillers. Like our other PCR products they are certified DNase-, 

RNase-und pyrogen free. The unique tube design and the longer cap form 

and seals compared to other tubes ensures a tight fit and avoids sample 

evaporation. 

The PCR tubes are available with a domed cap or flat cap in clear or 

colored. 

1 Unit=2 x 500 tubes 1-4 units 5-9units 10+Un. 

Cat. # Volume Cap form/ Color Price [USD] Price [USD] Price [USD] 

G001 0,2 ml domed / clear 45.20 42.90 39.80 

G001-A 0,2 ml domed / color mix 47.20 44.80 42.50 

G001-B 0,2 ml domed / blue 46.50 43.80 41.50 

G001-G 0,2 ml domed / green 46.50 43.80 41.50 

G001-O 0,2 ml domed / orange 46.50 43.80 41.50 

G001-R 0,2 ml domed / red 46.50 43.80 41.50 

G001-V 0,2 ml domed / violet 46.50 43.80 41.50 

G001-Y 0,2 ml domed / yellow 46.50 43.80 41.50 

1-4 units 5-9units 10+Un. 

G001-F 0,2 ml flat / clear 45.20 42.90 39.80 

G001-AF 0,2 ml flat / color mix 47.20 44.80 42.50 

G001-BF 0,2 ml flat / blue 46.50 43.80 41.50 

G001-GF 0,2 ml flat / green 46.50 43.80 41.50 

G001-OF 0,2 ml flat / orange 46.50 43.80 41.50 

G001-RF 0,2 ml flat / red 46.50 43.80 41.50 

G001-VF 0,2 ml flat / violet 46.50 43.80 41.50 

G001 YF 0,2 ml flat / yellow 46.50 43.80 41.50 

1-4 units 5-9 units 10+ un. 

G050 0,5 ml flat / clear 41.33 37.04 34.18 

G050-A 0,5 ml Flat / colored mix 45.62 42.61 40.61 

Quali - PCR Tubes, 8-Strip PCR Tubes 

8-strip PCR tubes have same characteristics as the single 0,2ml tubes and are DNase-, RNase and 

pyrogen free. The tubes are supplied in strips of 8 tubes. Strips in assorted colors are packed 

separately by individual colors. 

1 unit = 125 strips of 8 tubes 

Cat. # Volume Color 

1-4 

units 

Price 

[USD] 

5-9 

units 

Price 

[USD] 

G002 0,2 ml clear 95.00 91.00 86.00 

G002-A 0,2 ml colored mix 95.00 91.00 86.00 

10+ 

units 

Price 

[USD] 

10 

units: 

G002-B 0,2 ml blue 860.00 

G002-G 0,2 ml green 860.00 

G002-R 0,2 ml red 860.00 

G002-O 0,2 ml orange 860.00 

G002-V 0,2 ml violet 860.00 

G002-Y 0,2 ml yellow 860.00 

Quali - PCR Tube Caps 

1 unit = 125 strips of 8 tubes 1-4 units 5-9 units 10 +units

Cat. # Form Color Price [USD] Price [USD] Price [USD] 

G004 domed clear 21.90 19.90 17.90 

G004-F flat f. RT-PCR clear 37.04 35.61 34.18 

G004-A domed colored mix 21.90 19.90 17.90 

G004-B domed blue 179.00 

G004-G domed green 179.00 

G004-R domed red 179.00 

G004-O domed orange 179.00 

G004-V domed violet 179.00 

G004-Y domed yellow 179.00 

Quali - PCR Tubes with individual attached caps 

The Tubes are supplied in strips of 8 tubes ( 0,2ml ) and have the advantage, that an 

individual or several tubes can be closed, while others are still open. 

* domed cap for standard-PCR ( Kat.# G003, G003-A) 

* flat, optical clear cap for RT-PCR (Kat.# G003-SF) 

These tubes are DNase-, RNase- and pyrogen free. 

1-4 units 4-9 units 10+ units 

Cat. # Pack size Color Price [USD] Price [USD] Price [USD] 

G003 1 x 120 strips clear, domed cap 84.80 82.80 76.80 

G003-A 1 x 120 strips colored mix, domed cap 86.80 84.80 79.90 

G003 -SF 1 x 120 strips clear, flat cap for RT-PCR 82.80 80.80 72.80 

Quali - PCR Tubes with individual attached Caps 

For RT-PCR 

uniform wall-thickness garants accurate temperature transfer 

only small sample volume needed 

fast heating of enclosed air-volume and limitation of condensation 

packed as 10 Bags à 12 strips 

DNase-, RNase- and pyrogen free, free of human DNA 

1-4 units 5 + units 

Cat. # Pack size Color Price [USD] Price [USD] 

G003 -F 1 x 120 strips clear, flat cap for RT-PCR 79.90 76.50 

Quali - PCR Tubes 0,2 ml and Cap-Strips, 12- Strips 

Transparente tubes and caps in Strips of je 12 Tubes (0,2 ml) and Caps 

each 

domed, leakfree closing cap Deckel 

packed as 80 Strips of 12 Tubes and 12 caps = 1000 tubes and Caps 

DNase-, RNase- and pyrogen free 

1-4 units 5 + units 

Cat. # Description Pack size Price [USD] Price [USD] 

G005 Tube- and Cap-Strips je x 80 Streifen 106.80 99.80 

0,2 ml Low Profile Thin Wall Tube Strip EU (Extreme Uniform) for Éxtraordinary PCR 

& Real Time PCR´ 

Only an uniforme wall thickness ensures accurate temperature transfer and therefor an even and 

precision cycling - reaction. The tubes can be used with a volume as low as 5µl. The maximum wall 

thickness diference is only +/- 0,05 mm. The low profile of the tube strips improves not only the 

evaporation characteristics but also the light-gain, necessary for ´Real Time PCR´. 

Material 

Highest qualitaties of virgin polypropyle ensures a optimum balance between transparency, impact resistance and gastightness. 

These products are DNase-, RNase-, pyrogen free and free of human DNA. 

Cap Strip

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a minimum. Furthermore, it 

is extremly clear, allowing external monitoring of the tube´s content without opening. The extra wide optical areas ensure the 

highest maximum light transference which improves the minimum detection limit. When using PE Cyclers & Biorad iCycler we 

recommend the use of our ´Low Profile Strip Adapters´. 

Test the quality, we offer now special trial prices as shown below! 

Cat. # Description Pack size Price [USD] 

GK79601 EU 8-tube strip, transparent 1 x 120 Stips 71.43 

GK79609 EU 8-tube strip, weiss, für RT-PCR 1 x 120 Strips 70.14 

GK79610 EU 8-tube strip, schwarz, für RT-PCR 10 x 120 Strips 699.27 

GK79701 EU 8-cap strip, transparent 1 x 120 Strips 27.17 

GK77777 Low Profile Strip Adapter 1 adapter 78.65 

0,2 ml Thin Wall Tube EU (Extreme Uniformität) 



thickness diference is only +/- 0,05mm. 

Material 

High quality polypropylene garantes transparency and gas tightness, tubes are DNase-, RNase-, pyrogen free and free of 

human DNA. The Tubes have a better flexibility, which avoids cracking or other damages under higher pressure. 

Cap 

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a minimum. The dome like 

shape of the cap improves, in combination with sealing bands, the closure and condensation characteristics, while the flat 

frosted part of the cap may be written on for identification purposes. 

Finally, the cap is equipped with a so - called Ánti-Contamination-Tab´, that eliminates the effect of sample-to-sample carryover 

generated by manual opening. 



GK79401 EU -tube 0,2ml, transparent 1000 Tubes 59.30 

96–Well–PCR–Platten, flat surface, flexibel "high und low-profile" 

This plate fits any regular or RT-Cycler. The flat form can be closed by any sealing films 

of your choice. 

Low-Profile-Plates are recommended in case of small sample volumes, as the dead-room 

will be reduced between sample and heated lid. 

cuttable, when only small sample quantities available 

certified DNase-, RNase- and pyrogen free 

GK96HIGH:to close with films or 8er Cap-Strips GK79701, compatibel with Standard- 

Thermal-Cycler ABI and Biorad qPCR-Systemes 

GK96LOW:to close with films or 8er Cap-Strips G004-F, compatibel with Standard- 

Biometra-Thermal-Cycler, pPCR Eppendorf MasterCycler, MJ Opticon / Chromo4, qPCR 

Stratagene MX-3000 

Cat.# description 

Euro/50 

Plates 

USD/100 

Plates 

GK96HIGH PCR-Plate, high-profile transparent 159.00 299.80 

GK96LOW PCR-Plate, low-profile transparent 185.00 341.00 

Quali - PCR Plates without frame 

Our PCR-Plates in microtitre plate format comprises 96 x 0,2ml extra thinwall PCR Tubes, which 

guarantee a fast temperature exchange beetween heating system and sample. 

The PCR Plates are certified DNase- und RNase free and an alternative for laboratories with high 

quantity of samples. The high profile plates can be sealed with sealing films as well as with our 

domed(G004) or flat cap strips(G004-F).The PCR-Plates have an alpha-numeric coding system for 

easy identification and do fit to all comon thermal cyclers. The 96-well plates can be cutted into 

smaller section as required. 

Cat.# Format Color 

10 

Plates 

Price 

[USD] 

50 

Plates 

Price 

[USD] 

100 

Plat. 

Price 

[USD] 

G030 24 well clear 21.31 87.37 165.88 

G037 32 well clear 26.31 113.47 198.77 

G031 48 well clear 28.53 123.91 228.66

G032 96 well clear 40.18 198.77 384.67 

G033 96 well sterile clear 65.07 284.28 500.79 

G032-A 96 well colored mix 227.37 443.30 

G032-B 96 well blue 213.07 421.85 

G032-G 96 well green 213.07 421.85 

G032-R 96-well red 213.07 421.85 

G032-O 96 well orange 213.07 421.85 

G032-V 96 well violet 213.07 421.85 

G032-Y 96 well yellow 213.07 421.85 

Quali - PCR Plates, half and full skirted, 96 well - black lettering 

Alphanumeric coding in black letters, which are good to view, when loading the plates 

Compatibility: G060-SS will fit to G060-SS: Biometra Uno/TI, Eppendorf Mastercycler, MJ Research PTC100 und PTC200, 

MWG Primus 96 

G060/H/1E-SS will fit to Perkin Elmer cyclers 9600 and 9700 and to all ABI Systems 3700, 3730, 7000, 7700, 7900, 

GeneAmp 5700, 9600, 9700 and ideal for ABI 3100 sequencer. The flat surface simple mounting of sealing films 

. The plate G060H/OA-SS has an elevated skirt on top. 

10 Plates 50 Plates 100 Plates 

Cat.# Format Color Price [USD] Price [USD] Price [USD] 

G060-SS 96 well full skirt transparent 45.00 194.80 379.00 

G060/H/1E-SS 96 well half skirted for ABI 3100 transparent 39.80 189.80 375.00 

G060/H/1E-OA-SS 96 well half skirted for ABI 3100 transparent 45.00 194.80 379.00 

Quali - PCR Plates, half and full skirted, 96 well 

In addition to above PCR plates we offer further alternatives to use with 

other special cyclers. These plates have same features as the above 

described. The full skirt plates are compatible with robotic systems and 

the holes in the skirt allow an exact handling by robotic arms. The 

extra space provided by the skirt can be used for bar code labeling 

The "half skirt" plate G060/H/1E will fit for all ABI Systems 3700, 3730, 

7000, 7700, 7900, GeneAmp 5700, 9600, 9700 and ideal for ABI 3100 

sequencer. The flat surface simple mounting of sealing films 

. The plate G060H/1E-OA has an elevated skirt on top. 

G060H-1E-W white plates are especial useful for "Lighttyper" 

Hoffmann-LaRoche. 

All plates (exept G060/H1E-OA) are available in different colors, please 

add the colore-code to the cat.nr. when ordering: B = blue, G = green, 

R = red, O = orange, V = violet, W=white, Y = yellow. 

for sealing options like septa mat and RT-PCR films see sealing 

options for PCR-Plates. 


Cat.# Format Color Price [USD] Price [USD] Price [USD] 

G060 96 well full skirt transparent 47.55 198.77 384.67 

G060/H/1E 

G060/H/OA 

G060/H/SG 

96 well half skirted for ABI 

3100 


3100 

96 well half skirted, 

segmented 

transparent 47.55 198.77 384.67 

transparent 47.55 198.77 384.67 

transparent 47.55 198.77 384.67 

XXX-B-G-R-O-V-W-Y 96 well colored 213.07 421.85 

Quali - PCR Plates with Barcode EAN 128, 96 Well

Technical specifications as described above, but labeled with Barcode 

please specify position on which barcode should be placed when ordering 

50 Plates 100 Plates. 

Cat.# Format Color Price [USD] Price [USD] 

G060-BC 96 well full skirt transparent Transparent 227.37 427.57 

G060/H-BC 96 well half skirt transparent 227.37 427.57 

G060/H/1E-BC 96 well half skirted for ABI 3100 transparent 227.37 427.57 

G060/H/OA-BC 96 well half skirted for ABI 3100 transparent 227.37 427.57 

Quali - PCR-Plates, 96 well for ABI Cycler and RT-Cycler 7500 "Fast" and 9800 

"Fast" 

High quality polypropylene, black coding 

certified DNase-, RNase- and pyrogenfrei 

„low profile“- Plate semi scirted 

cut corner in Position A1 

Cat.# Description Color Price [USD] Price [USD] 

G060/H/1E-7500 96 Well half scirted transparent 198.77 384.67 

Quali- PCR-Platten for LightCycler 480® I and II 

These PCR-Plates can be used with the LightCycler 480® System. 

with bare code 

96 wells, white, flat surface 

certified DNase-, RNase and pyrogen free 

Cat.# Description Color Price [USD] Price [USD] 

GK480K-BC 96 Well half scirted white 318.00 599.00 

Septa/Tubes/Capillaries for ABI 3100, 3130 and ABI PRISM 310 

Septa mats (Cat.Nr. G060/S-3100): made from high pur silicon, very flexibel; 

certifizied DNase-, RNase-and pyrogen free, autoclavable- and reusable for 

ABI PRISM 3100 

Septa(Cat.Nr. G310-S) for 0,5 ml Tubes and 0,5 ml Tubes (G310-T) for ABI 

PRISM 310 

Cat. # Description Application Pack size Price [USD] 

G060/S-3100 Septa Mat ABI 3100 10 mats 108.32 

G310-S Septa f. 0,5 ml Tube ABI 310 500 179.00 

G310-T 0,5ml Tube ABI 310 500 58.35 

G310-K47 Capillary 47cm ABI 310 5 375.00 

G310-K61 Capillary 61cm ABI 310 2 215.00 

Ultra-Clear-Folie für die RT-PCR 

Ultra-Clear-Film (cat.nr.G060/UC-RT): the clearness garants the optical analysis during the 

RT-PCR. The unique pressure sensitive glue does not remain any residues on the PCRplate, 

which can interfer with the samples


G060/UC-RT Ultra Clear RT-PCR-Film RT-PCR 100 Films 219.00 

PCR-Tube-Caps ( 8er-Stips) for die RT-PCR 

RT-PCR-cap-strips (cat.Nr.G004-F): usable with our PCR-plates and 8er-Tube-Stips. 

The flat optical clear lid is especially useful for RT-PCR. 


G004-F Caps, flat for RT-PCR RT-PCR 125 strips of 8 37.04 

Piercable Alufilm for wide Temperature Range 

* for PCR-Plates, Microtestplates, Deep-Well-Plates 

* resistent against contact with agressiv reagents 

* piercable with the pipet tip 

* temperature range: -80 bis +135°C 

* certifiziert DNase- RNase- and pyrogenfrei 


G071-P Adhesive Aluminiumfolie, piercable -80 to 135°C 100 39.00 

Alufilm, Paper backed 

low cost standard film for PCR-Plates, microtestplates, deep-well-plates 

* resistent against contact with agressiv reagents 

* useful to protect light sensitive samples 

* certifiziert DNase- RNase- and pyrogenfrei 


G071 Adhesive Aluminiumfolie, Papier kaschiert -40 to 135°C 100 35.00 


PE-Adhesive-Film and PP-Thermal-Seal-Film 

* G040/G041: für den Einsatz bei kurzzeitigen hohen Temperaturen wie PCR 

* zum Verschluss von ELISA-Platten 

* G042: eine hochwertige Folie (PP) für den Thermoverschluss von PCR-Platten 


G040 Adhesive Film -40°C bis +100°C 100 54.34 

G041 Adhesive Film sterile -40°C bis +100°C 100 79.72 

G042 Thermal Sealing Film -40°C bis +100°C 100 82.30 

G079 Pressure rol 100 1 42.76 

384 PCR Plates, optimized for ABI- and MJ-Research Systems 

Full scirt plate, compatibel with robotic systemes 

8 grips in scirt for positioning in the robot 

working volumen 50 µl, with siliconmate 40 µl 

alphanumeric identification system

ultrapure polypropylene 

certified DNase-, RNase- and pyrogen free 

Form-optimized for Sequencer: ABI 3100, 3130, 3700, 3730, 3730X, Amersham MegaBase 4000 

RT-PCR-Cycler: ABI 7900HT 

PCR-Cycler: ABI 2700, 9700, MJ Research Systeme PTC100, 200 und C225, Dyad, Biometra Uno II, T-1, 

Trobot, Techne Gradient TC-512 

10 Plates 50 Plates 100 Plat. 

Cat. # Color Euro Price [USD] Price [USD] 

G034-ABI transparent 39.90 255.97 456.17 

G034-ABI-A colored mixed -- 298.87 570.57 

G034-ABI-B blue -- 298.87 570.57 

G034-ABI-S black -- 298.87 570.57 

G034-ABI-G green -- 298.87 570.57 

G034-ABI-O orange -- 298.87 570.57 

G034-ABI-R red -- 298.87 570.57 

G034-ABI-V violet -- 298.87 570.57 

G034-ABI-W white -- 298.87 570.57 

G034-ABI-Y yellow -- 298.87 570.57 

Quali 384 PCR Plate, Rigid-Plate 

* made from special resistant high pure copolymer 

* optimized for robotics- and automatisation systems 

* no change of form 

* 8 grips in the frame for positioning in robot systems 

* alphanumerical identification ssystem 

* working volumen 48 µl, with silicon mate 30 µl 

* certified DNase-, RNase and pyrogen free 

* Form-optimized for most blocks of sequencer, RT-PCR-Cycler and PCR-Cycler 

* available on request with Barcode 

50 Platten 100 Platten 

Cat. # Color Price [USD] Price [USD] 

G034 -H transparent 299.00 578.00 

384 PCR Plate 

The 384 PCR plate is manufactured for "High Throughput Screening" laboratories. The maximum 

well capacity is 40µl with a working volume of 25µl to accomodate additional DNA replication. The 

384 PCR plate is complete compatible with 384 thermal cyclers, like Perkin Elmer 9700, Techne, 

Hybaid. The surface of the plate is embossed with an alpha-numeric grid for easy well location. 

The conical flat bottom well ensures even aspiration and the clarity of this ultra pure polypropylen 

is unsurpassed. They also can be easily labeled for bar coding in robotersystems. The plates are 



Cat. # Color Euro Price [USD] Price [USD] 

G034 clear 39.90 270.27 470.47 

G035 white -- 313.17 599.17 

G036 black -- 313.17 599.17 

Silicone mats for PCR-Plates 

Our silicon mates are made from ultra pure silicon and therefore very 

flexible. The mats show an alphanumeric grid system corresponding to 

the microplates for easy identification. The piercable selfsealing feature 

ensures, that evaporation and aerosoles are hindered from escaping. 

The mats can be cleaned, autoclaved reused and frozen and are certified 

DNase-, RNase and pyrogen free 

Cat. # Use with: Unit Price [USD] 

G072 PCR-plate, 96 well 10 65.78 

G073 PCR-plate, 384 well 10 71.21

G074 PCR-plate, 384 deep well 10 71.21 

Silicone Expension and Compression mats for PCR 


flexible. The mats show an alphanumeric grid system corresponding to 

the microplates for easy identification. The piercable selfsealing feature 

ensures, that evaporation and aerosoles are hindered from escaping. 

The mats can be cleaned, autoclaved reused and frozen and are 

certified DNase-, RNase and pyrogen free. 

G068 Compression Mat: garantes vapor lock, avoides evaporation 

during PCR, also usable in conjunction with sealing films 

G078 Expansion-Mat: for Perkin Elmer, seals all tubes in "MicroAmp" 

Tray. 

Cat. # Use with Unit Price [USD] 

G078 Expension Mat f. PE Cycler 10 60.06 

G068 Compression mat for PCR-plate 10 60.06 

G068-RT Compression mat for 96 well RT-PCR-plate 10 84.37 

PCR Plates Compatibility 

Thermo 

Cycler 

G032 

96 

Well 

G060 96 Well 

mit Rahmen 

ABI 3100 / 3130 ok 

ABI 3700 / 3730 ok 

G060/H/1E & G060/H/OA 

96 Well, Halbahmen 

G060/H/SG 96 Well 

segmentiert, Halbrahmen 

ABI Prism 7700 ok ok 

ABI Prism 7000 ok ok ok 

ABI Prism 7900 ok 

ABI Geneamp 

2720/5700 

ABI Geneamp 

9600 / 9700 

ok ok 

ok ok ok ok 

Biometra Uno ok ok nur G060/H/1E ok 

Uno II ok ok 

TI ok ok nur G060/H/1E ok 

TGadient ok nur G060/H/1E 

TRobot ok nur G060/H/1E 

Bio-Rad 

GeneCycler 

Icycler ok ok ok 

Mycycler ok 

Eppendorf 

Mastercycler 

Hybaid Sprint ok 

ok ok ok ok 

Express ok ok ok ok 

Touchdown ok ok ok 

Omigene ok ok ok ok 

Omn-E ok ok ok 

MJ Research 

PTC200 

ok ok ok ok ok 

PTC225 ok ok ok 

PTC100 ok ok ok ok 

MWG Primus 

96 

ok ok 

Primus 384 ok ok ok 

PE 9600 ok ok ok 

9700 ok ok ok ok 

Roche 

Lighttyper 

Stratagene 

Robocycler 

ok 

ok ok 

ok ok 

G034-ABI 

384 Well

Techne TC-412 ok ok ok ok 

TC-512 ok ok ok ok 

Beckmann CEQ 

alle Modelle 

Quali - Deep Well Plates 

These plates are produced from high pure polypropylene, which is autoclavable. The 96 wells 

are compatible with multi-channel pipettors and can be used with roborters. As the plates have 

cylindrcyl walls with round bottom wells, the samples can be repipetted completely, which is not 

possible with square form wells. 

The deep well plates are stackable and cerfified DNase, RNase- pyrogen and metal free, which 

is ideal for DNA/RNA assays and other enzyme tests.The plates are chemical resistant and 

widestand deep temperatures up to - 80°C 

To close plates, we offer different alternatives as our self adhesive PP and Alu films and 

autoclavable and piercable high pure silicon mats. The silicon mats are also freezable and 

feature an alphanumeric grid system. 

ok ok 

Cat.# description material/ color/ pack size Price [USD] 

G069 0,5ml 96 well plate PP/ clear/ 50 plates 196.63 



G064 2,0ml 96 Square well plate PP/ clear/ 25 138.57 

Silicon mats and Sealing Films for Deep-Well- and Tissueculture plates 

Silicon mat: ultra pure silicon, very flexibel, alphanummeric coding system, piercable, 

selfsealing, autoclavable- and reusable. 

Breathable Sealing film: porous adhesiv filmspecialy designed for use in cell and tissue 

culture applications. The film seals all types of microplates andd effectively allows gas 

exchange for cellular or bacterial cultivation, while at same time preventing crosscontamination. 

Cat.# G067 non steril and G067-S steril , dimensions 80x12mm LxW 

PP-Film Cat.Nr. G070: selfsealing film made from PP, suitable tfor sealing tissue culture 

plates, for short term storage and incubation, temperatureresistant from –40 to +80°C, 

Dimensions 78 x 120mm + 10mm Gripp 

Alufilm Kat.Nr. G071: selfsealing, paper backed Aluminium film, temperature resistant from 

–40 to +135°C, dimensions 78 x 120mm + 10mm Gripp 

All silicon mats and sealing films are DNase- RNase- and pyrogen free 

Cat.# Description Pack size Price [USD] 

G070 PP-Film 100 34.46 

G071 Alu-Film 100 35.18 

G067 Breathable Film 100 98.67 

G067-S Breathable Film 2 x 25 70.07 

G075 for round Deep Wells 1 or 2ml G062/G063 10 55.77 

G076 for quadratic Deep Wells 1 or 2ml G064 10 55.77 

G077 for round Deep Wells 500µl 10 55.77 

384-Well ´Diamond´ Microplates and DMSO resistant Imperma Mat 

A new square well Plate for "HTS and Drug Discovery Labs" , available in 120µl and 240µl 

excellent chemical resistance, usable from -80°C to +120°C 

standard SBS Foot Print for robotic applications 

240 µl version for maximized sample storage capacity 

ultraflat surface permits excellent seal with adhesive or heat seal films 

alphanumeric grid for easy well identification 

supporting ribs enhance plate strenght for centrifugation up to 4.000 rcf 

Imperma-Mat: autoclavable, usable in temperature range from -80 to 121°C 

reusable, provides a cost effective alternative to other sealing products 

chemical resistant for storage sample which require use uf strong solvents as DMSO 

noextractables - no sample contamination 

plates and mats are certified DNase-, RNase free. 

Cat.# Description Max. Volume with Siliconmat Pack size Price [USD] 

G384-12 384 Microplate 120µl 90µl 50 255.97 


G384-SQ 384 Imperma-Mat (Silicon) for square wells 10 71.21

Multi-Channel Disposable Solution Basins 

A useful help for working with multi-channel pipettors 

fillingvolume 55ml, angeled sides and V-shaped bottom for nearly complete sample withdrawal 

offered in clear PVC or white polystyrene 

Cat.nr. description 

Pack 

size 

R047 Reservoir transparent 10 8.29 

R047-W Reservoir white 10 8.29 

Accessories for ABI PRISM 377 

Below is a list of parts as glas-plates, spacers, combs for the automatic sequencer ABI PRISM 

377 

items signed with * are for 96well Upgrade 

High Volume Combs have more space between the combs and tooth are sharper tapering as 

standard Sharktooth combs 

extra long combs have 2mm longer tooth as standard combs 

Sharkgum combs are not sharp tapering, it causes a bigger distance between the lanes 

ABI PISM is registered Trademark of Perkin Elmer Corporation 

Cat.# Description Pack size Price [USD] 

377-12GP Borosilicate Glass Plate front 12 cm L 1 301.73 

377-12GSP Borosilicate "Step" Glass Plate front* 12 cm L 1 596.31 

377-12GPR Borosilicate Glass Plate rear 12 cm L 1 301.73 

377-24GP Borosilicate Glass Plate front 24cm L 1 411.84 









377-12SM Spacer, Mylar 12cm x 0,2mm 2 71.36 




377-24ST 24 well Sharktooth Comb, mylar 0,2mm 1 77.22 




377-48STU-02 48 well Sharktooth Comb, mylar 0,2mm, * 1 112.97 













Price 

[USD]






377-24WF 24 Well-Forming(square) Comb, mylar 0,2mm 1 84.37 





Casting Combs 

377-55SE 5,5mm deep Straight Edge Comb,mylar 0,2mm 1 92.95 




377-73SE-02 7,3mm deep Straight Edge Comb,mylar 0,2mm 1 92.95 

377-73SE-04 7,3mm deep Straight Edge Comb,mylar 0,4mm 1 92.95 

Special Combs 

377-48HVST 48 well High Volume Sharktooth Comb, mylar 0,2mm 1 92.95 



377-96HVST-02 96 well High Volume Sharktooth Comb, mylar 0,2mm 1 92.95 



377-48ELST 48 well Extra Long Sharktooth Comb, mylar 0,2mm 1 92.95 



377-32SG 32 well Sharkgum Comb, 0,2mm 1 92.95 




377-64SGU-02 64 well Sharkgum Comb, 0,2mm, * 1 112.97 







Quali - Microtest-Plate, 96 Well for Protein Crystallography 

This 96-well SBS standard "Sitting Drop" HTP protein crystallography plate is made of optical clear 

polystyrene. The buffer well has a novel D-form geometry located on the right, with the elevated round 

shape protein well located to the left. The plate can be filled manualy with pipettors or with robotic systems. 

The plate is sealed with optical clear sealing films as our Ultra-Clear Film cat.# G060/UC-RT 

To avoid fingerprints on the film, which could interfere with optical clarity, we recommend the use of our 

semi automatic MiniSealer 

Charakteristiks: SBS standard plate with 96 well,sitting drop vapor diffudion protein Crystallisation Plate 

(maximum volume 250 µl, and one corresponding prorein well (maximum 4,3 µl volume 

compatible with manual pipettors and automated robotic systemes 

resistant to organic solvents 

reduced polarization and statik 

stackable 

bar-coding option 

the round protein well allow easier loop access for crystal manipulation 

Cat.# Description USD/VE USD/VE 

G096-PC Crystallography Plate, 96 Well 120.00/10 564.85/50 

G060/UC-RT Ultra-Clear-Film 242.80/100 

Quali - Microtest-Plates, 96 Well Polypropylene

These 96-Well-Plates are made from highest quality medical grade polypropylene.They have an ultra-flat 

surface and are compatible with HTS and robotic liquid handling equipment (SBS-standard). Applications: 

sample storage and transport – screening – reagent transfer – HTP and Microtiter assay. 

They feature: 

available in round bottom (500µl), excellent for gentle cell manipulation and V-bottom (450µl) for efficient 

sample collection and manipulation 

raised "chimney" well rims reduce concernes for cross contamination and prodives surface area for 

effective heat and adhesive sealing applications 

high contrast alphanumeric labeling on each well for efficient well identification 

extremly sturdy plate to withstand a wide range of chemicals, solvents and alcohols 

usable in temperature range from -80 to 121°C 

certified DNase-, RNase and endotoxin free. 

Cat.# Description Color Pack size Price [USD] 

G096-U Microtest-Plate, U-Form, 96 Well transparent 50 70.07 

G096-UBB Microtest-Plate, U-Form, 96 Well blue 50 98.67 

G096-UBG Microtest-Plate, U-Form, 96 Well green 50 98.67 

G096-UBR Microtest-Plate, U-Form, 96 Well red 50 98.67 

G096-UBY Microtest-Plate, U-Form, 96 Well yellow 50 98.67 

G096-UBW Microtest-Plate, U-Form, 96 Well white 50 98.67 

G096-UBS Microtest-Plate, U-Form, 96 Well black 50 98.67 

G096-V Microtest-Plate, V-Form, 96 Well transparent 50 70.07 

G096-VBB Microtest-Plate, V-Form, 96 Well blue 50 112.97 

G096-VBG Microtest-Plate, V-Form, 96 Well green 50 112.97 

G096-VBR Microtest-Plate, V-Form, 96 Well red 50 112.97 

G096-VBY Microtest-Plate, V-Form, 96 Well yellow 50 112.97 

G096-VBW Microtest-Plate, V-Form, 96 Well white 50 112.97 

G096-VBS Microtest-Plate, V-Form, 96 Well black 50 112.97 

Quali - Microtiter Plates 

Made from high our polystyrene, minimum of own fluorescence and highest optical quality. 

frosted finish to plates preventes errors from external light 

Compatible with automated plate readers. 

Alphanumerc coding on the frame and each well for easy sample identification. 

Lid orientation corner and condension rings on the lid reduce risk of contamination and condension 

sharper V-angel for faster setting of cells. 

Cat.# Description/Volume in ml/well USD/100 Plates USD/1000 plates 

G080-UB U-Form, 0,35 55.63 513.37 

G080-V V-Form, 0,34 55.63 513.37 

G080-F Flatt-botom, 0,41 55.63 513.37 

G080-D Lid 55.63 341.77 

Quali - Micro-Plates for Tissue Cultures, 96 Well, sterile with Lid 

Only optical clear and ultrapure plastics are used in the production for our 

cell- and tissue culture plates and have for microscopical examinations an 

unreached optical clearance. The plates feature: 

special atoxic surface treatment for best celladhesion and cell growth, 

condensation rings avoid loss of material and change of osmolarity, no toxic 

residue from gamma sterilisation, 

safe sterilty closing in transparent peel-off bags, 

packed as 1 plate with lid, 

size of all plates: 94 x 16mm (diameter x hight) 

Cat. # Description/volume in ml/well 

Volume / growth 

area 

Pack. unit Price [USD] 

G080TC-UB TC-Plate, U-form, 0,35 0,32 ml / 0,36cm2 100 St. 199.00 

G080TC-F TC-Plate, flat, 0,41 0,36 ml / 0,36cm2 100 St. 219.00 

Quali - Mikro-Plates fr Tissue cultures, 4-, 6-, 12-,or 24 well, sterile, with lid 

These plates feature same specifications as above plates: special atoxic surface

treatment 

condension rings – gamma sterile 

no toxic residues by gamma-sterilisation 

optical clear and and uniform for microscopy 

safe packaging through peel-packaging 

1 plate with lidl 

packed: 4 well: 4 plates / bag, 6 – 12 – 24 well 1 plate / bag 

Cat. # Description Volume / growth area Pack.unit Price [USD] 

G080TC-4F TC-Platte, flach, 4 well 1 ml / 2,0 cm2 100 St. 219.00 




Quali - Petri Dishes for Microbiology and Tissue Culture 

Our petri dishes meet the highest requirements, optical transparency and optical clear for microscopy, high 

thermostability, plain surfaces, formstability and machine sterile production conform to standard-hygienic for 

multipurpose use in bacteriology. The plates are suited for filling of culture-media from automatic machines. 

The petri dishes are machine sterile for bacteriology and gamma sterile for tissue culture, 

The dishes for bacteriology are available with or without vents. 

The dimensions are 94 x 16mm ( Diameter x H ) 

Cat. # Form / Sterility Vents USD / units USD / units 

G090 not devided / m-sterile no 70.00 / 480 892.30 / 9600 

G091 not devided / m-sterile yes 70.00 / 480 892.30 / 9600 

G092 ½ devided / m-sterile yes 74.36 /490 1,211.21 / 9600 

G094 ¼ devided / m-sterile yes 84.37 /490 1,284.14 / 9600 

G093 - TC not devided, gammasterile no 427.50 / 600 1,428.57 / 2400 

G094 -TC not devided, gammasterile yes 427.50 / 600 1,428.57 / 2400 

Loops and Needles for Mikrobiology 

For inoculation of micobes, dual propose: one end is loop and the other needle 

made from flexible polypropylene 

inoculation volume 1 µl or 10 µl 

presterilized 

packed as 10 loops / bag 

Cat. # Color / Volume Length Price [USD] 

G205 white / 1 µl 195 mm 79,80 / 500 

G206 blue / 10 µl 195 mm 76,90 / 500 

Dish-spreader for Mikrobiology 

For the spreading of microbiological samples in petri dishes 

made from flexible polypropylene 

presterilized 

packed as 10 / bag 

Kat. # Breite Länge Price [USD] 

G207 30 mm 143 mm 95,70 / 500 

Quali - Microtest Plates, 384 Well, Polystyrene 

Made from high quality, cristall clear polystyrene 

Fluorescence and luminescence assays have been sucsessfully tested 

high signal to noise ratio with low background is a characteristic feature 

useful for HTS – Laboratories 

flat bottom, working volume 10 – 100 µl 

packed as 10 plates/ bag

Top of Page 


Cat.# Description Pack.unit Price [USD] 

G081-C MTP-Plate, clear 40 168,00 

G081-W MTP-Plate, white 40 168,00 

G081-BL MTP-Plate, black 40 190,40 

"Label - Tape“ Marker Tape 

A self adhesive writing tape for sample identification or signing of accessories in the Lab. 

Advantages: widstanding manifold autoclaving ( +121°C ) deep temperature resistant up to -23°C, to use 

with most pens 

Cat.# Color Roll dimensiom (WxL) Price [USD] 

LT-54W white 19,1mm x 54m 15.59 

LT-54GR green 19,1mm x 54m 15.59 

LT-54GE yellow 19,1mm x 54m 15.59 

LT-54BL blue 19,1mm x 54m 15.59 

LT-54RO red 19,1mm x 54m 15.59 

LT-54OR orange 19,1mm x 54m 15.59 

LT-54Mix all colors 6 Rolls 78.51 

LT-54RH Roll Holder 1 105.75 

Disposal Bags 

* for collection and disposal of used laboratory-consumables as petridishes, pipet tips, microtubes etc. 

* made from polypropylene, foil strenght 40 µ, dimension: 300 x 200 mm 

* autoclavable at 121°C, do not close complete the bag during autoclaving 

* polymer-coated tablestand, 3-leg with rubber feet 

Cat.# Description Dimension Pack.unit Price [USD] 

HEB-3020 Disposale bags 300 x 200 mm 100 13.60 

HEB-ST stand 125 x 250 mm 1 12.60 

Parafilm "M" 

Parafilm ist eine geschmeidige, wasserdichte, halbtransparente Folie für den Laborgebrauch zum 

Verschliessen von Gefäßen und Röhrchen. Sie ist praktisch geruchlos, resistent gegen Alkohol, Säuren und 

Basen in schwachen Konzentrationen 

Parafilm wird in der praktischen Dispenserbox geliefert 

Cat.# Description Dimension Price [USD] 

HP-5075 Parafilm 4 inch x 125 ft 39.50 

HP-2250 Parafilm 2 inch x 250 ft 56.60 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Quali - Centrifuge Tubes and Labels 



Advantages: widstanding manifold autoclaving ( +121°C ) deep temperature resistant up to -23°C, to use 

with most pens 

Print version 

Cat.# Color Roll dimensiom (WxL) Price [USD] 

LT-54W white 19,1mm x 54m 15.66 

LT-54GR green 19,1mm x 54m 15.66 

LT-54GE yellow 19,1mm x 54m 15.66 

LT-54BL blue 19,1mm x 54m 15.66 

LT-54RO red 19,1mm x 54m 15.66 

LT-54OR orange 19,1mm x 54m 15.66 

LT-54Mix all colors 6 Rolls 78.51 

LT-54RH Roll Holder 1 105.75 

Parafilm M 

Parafilm is a soft, waterproof, halftransparent film for Laboratory use to close tubes and vessels. Parafilm 

does not smell, is resistant against alkohol, acids and basic fluids in weak concentrations 

Parafilm is delivered in a practical dispenserbox. 

Cat. # Description Dimensions Price [USD] 

HP-5075 Parafilm 100 mmx38 m (4 inchx125 ft) WxL 41.90 

Quali - Stickers, 'hot - cold' 

Labels precutted for tubes 0,2 - 2,0 ml, convenient to use, simply write on the label, peel off from 

the backing paper and press into position on the tube. Temperature resistant from -196°C to 

121°C. 

Quali - stickers adhere to all plastics 

Cat. # Size For tubes 

Pack 

size 

Price 

[USD] 

HK-20 32,5 x 13 mm 1,5/2,0 ml (roll) 1000 41.47 

HK-95-L 9,5 mm Ø for Laserprint 3840 199.80 

HK-13-L 13 mm Ø for Laserprint 3840 199.80 

HK-L 32,5 x 13 mm for Laserprint 2040 97.17 

Quali - Microcentrifuge Tubes 

Our microcentrifuge tubes are made from 99,9% pure polypropylen without fillers 

or heavy metals. Our colors do not contain any metallic ions, not even the usual 

iron, chromium or nickel used in dyes. The microcentrifuge tubes do resist 

20.000xG force 

frosted lid with 28 mm piercable zone 

easy and absolute tight closing seal 

1,7 ml and 2.0 ml tubes are perfect clear 



Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

1-9 pck 10+ pcks 

Cat. # Volume / color Pack size Price [USD] Price [USD] 

G051 0,6 ml / clear 1x1000 31.03 28.46 

G052 1,7 ml / clear 1 x 500 15.30 13.87 

G052-A 1,7 ml / colored mixed 1 x 500 18.52 17.02 

G052-B 1,7 ml / blue 10 x 500 185.19 168.17 

G052-G 1,7 ml / green 10 x 500 185.19 168.17 

G052-R 1,7 ml / ret 10 x 500 185.19 168.17 

G052-O 1,7 ml / orange 10 x 500 185.19 168.17 

G052-V 1,7 ml / pink 10 x 500 185.19 168.17 

G052-Y 1,7 ml / yellow 10 x 500 185.19 168.17 

Quali - "BoilProof" Microcentrifuge Tubes, perfect clear 

no pop-up during heating phase, tested at 55 psi (4 Atu) at 100°C 

perfect glass clear 

made from 99,9% pure polypropylen without fillers or heavy metals 

colors do not contain any metallic ions, not even the usual iron, chromium or nickel used 

in dyes 

they do resist 20.000xG force 

frosted lid with 28 mm piercable zone 

easy and absolute tight closing seal 


1-9 pck 10+ pcks 

Cat. # Volume / color Pack size Price [USD] Price [USD] 

G052BP 1,5ml / clear / BoilProof 1 x 500 13.59 12.16 

G053BP 2,0ml / clear / BoilProof 1 x 500 17.02 15.59 

Quali - Microcentrifuge tubes, super clear, steril 

gammasterile microcentrifuge tubes in practical small packages 

1-4 pck 5-9 pck 10+ pcks 

Cat. # Volume / color Pack size Price [USD] Price [USD] Price [USD] 

G051-S 0,6 ml/clear/steril 5x100 28.31 27.17 25.88 

G052-S 1,7 ml/clear/steril 5 x 50 17.88 16.73 15.59 

G053-S 2,0 ml / clear/steril 5 x 50 22.74 21.31 19.88 

Quali - "Low Retention" Microcentrifuge Tubes ( formerly Siliconized Tubes ) 

Those clear Low Retention" tubes are replacing the formerly produced siliconized 

microcentrifuge tubes. These tubes feature extremly low adhesion for optimal recovery of 

samples. Through a new polymer technology there are no silicons or lubricants added. 

tubes are certified DNase-, RNase and pyrogen free 

1-9 pcks 10+ pcks 

Cat. # Volume Pack size Price [USD] Price [USD] 

G016 0,6ml 500 21.60 19.90 

G017 1,7ml 500(2x250) 24.90 23.90 

G018 2,0ml 250 15.90 14.95 

Value Line Microcentrifuge Tubes 

made from PP, mostly chemical- and temperature resistant, flat, piercable, easy to handle and tightly shut lid 

1-5 Units 6-10 Units 11+ Units

Cat. # Volume / Color Pack.Unit Price [USD] Price [USD] Price [USD] 

G056 0,5 ml / clear 1 x 1000 17.88 16.45 15.02 

G054 1,5 ml / clear 1 x 1000 17.88 16.45 Price [USD] 

G054-8 1,5 ml / clear 8 x 1000 128.56 120.26 114.26 

G054-B 1,5 ml / blue 8 x 1000 155.87 

G054-G 1,5 ml / green 8 x 1000 155.87 

G054-R 1,5 ml / red 8 x 1000 155.87 

G054-Y 1,5 ml / yellow 8 x 1000 155.87 

G055 2,0 ml / clear 8 x 1000 19.31 17.88 

G055-8 2,0 ml / clear 8 x 1000 138.71 134.42 128.56 

Quali - Capless Tubes 

The capless tubes have same features as our "Quali" - microcentrifuge tubes and are DNase-, 

RNase,- pyrogen- and metal free. 

1-9 packs 

Cat. # Volume / color Pack size Price [USD] 

10- 

19pck 

Price 

[USD] 

20+pck 

Price 

[USD] 

G044 1,5 ml / clear 500 tubes 15.37 14.59 13.80 

G045 2,0 ml / clear 500 tubes 17.37 16.52 15.66 

Quali - Screw Cap Tubes - Sterile 

Quali - Screw Cap Tubes serve a broad range of laboratory needs, including collection, processing, 

centrifugation, long term storage and OEM packaging, shipping of restriction enzymes or other DNA/RNA 

modifying enzymes. 

Quali-Microcentrifuge tubes are certified DNase-, RNase- and pyrogen free. They are delivered sterile with 

cap in packaging units of 10x50/bag = 500 tubes. The tubes can be delivered in ten different colors on 

request, minimum order 4.000 or multiple/ color. 

Cat. # Form Volume / Color 

500 

tubes 

Price 

[USD] 

4000 

tubes 

Price 

[USD] 

G019 conical 0,5 ml / clear 97.80 699.81 



G022 freestanding 0,5 ml / clear 97.80 699.81 



G019A conical 0,5 ml / colored mix 723.79 



G022A freestanding 0,5 ml / colored mix 723.79 



Quali - Amber Screw Cap tubes 

made from biological inert material 

protect light sensitive samples 

tubes useful for low temperature storage up to -196°C (gasphase)

centrifugation possible up to 20.00 x g 

0,5ml tube freestanding with space for labeling 

1-9 Units 10-19 Units 20+ Units 

Cat. # Volume / color Pack.unit Price [USD] Price [USD] Price [USD] 

G022-AM 0,5 ml tubes without cap 500 32.89 30.60 28.31 



CP-AM caps 500 57.06 55.06 52.05 

Quali - Centrifuge tubes (Falcon type) 15 and 50ml - steril 

transparent stabel polypropylene copolymer with green screw cap 

excellent visible black graduation, (exept freestanding has white graduation) white writing area 

autoclavable 

maximum g-Force in closed beaker: G027-GC: 9.400 x g / G028-GC 7.500 x g 

Cat. # Volumen/dimension Form Pack.unit Price [USD] 

G027-GC 50 ml / 30 x 115 mm conical 4 bag à 25 Tubes 24.9 

G027-GC/500 50 ml / 30 x 115 mm conical 20 bag à 25 Tubes 99.00 

G027-GCSS 50 ml / 30 x 115 mm free standing 4 bag à 25 Tubes 29.90 

G027-GCSS/500 50 ml / 30 x 115 mm free standing 20 bag à 25 Tubes 139.00 

G027-GC-R 50 ml / 30 x 115 mm conical 4 Racks à 25 Tubes 29.90 

G027-GC-R/500 50 ml / 30 x 115 mm conical 20 Racks à 25 Tubes 139.00 

G028-GC 15 ml / 17 x 120 mm conical 4 bag à 25 Tubes 22.90 

G028GC/500 15 ml / 17 x 120 mm conical 20 bag à 25 Tubes 99.80 

G028-GC-R 15 ml / 17 x 120 mm conical 4 Racks à 25 Tubes 28.80 

G028-GC-R/500 15 ml / 17 x 120 mm conical 20 Racks à 25 Tubes 129.00 

Quali - Centrifuge Tubes / Sample Tubes 

Made from transparent polypropylen with screw cap 

graduated in 1 ml intervalls 

non sterile or sterile 

Cat. # Volume/dimension Pack.Unit Price [USD] 

G115 5 ml/ 16 x 57 mm 1000 72.90 

G115-S 5 ml/ 16 x 57 mm 20x25 / steril 83.90 

G116 10 ml/ x mm 1000 72.90 

G116-S 10 ml/ x mm, steril 20x25 / steril 83.90 


Made from transparent polypropylen with screw cap, the 30 ml tubes are graduated. 

Cat. # Volume/dimension Pack.Unit Price [USD]

G100 13 ml/ 16 x 100 mm 1000 99.80 

G100-S 13 ml/ 16 x 100 mm, steril 10x100 / steril 189.30 

G106 15 ml/ 20 x 76 mm 1000 117.80 

G106-S 15 ml/ 20 x 76 mm, steril 10x100 / steril 199.80 

G107 30 ml/ 25 x 107mm 500 147.30 

G107-S 30 ml/ 25 x 107 mm, steril 5 x 100 / steril 199.40 

Centrifuge Tubes made from Polystyrene, hight transparent 

Cat. # Volume/dimension Unit / Form Price [USD] 

G101 12 ml/ 16 x 100 mm 2000 / round bottom 49.60 

G102 12 ml/ 16 x 105 mm 1000 / conical 49.90 

G103 3,5 ml/ 12 x 55 mm 5000 / round bottom 89.90 

G104 20 ml Diluter Tube/22x62 mm 1000 / flat bottom 49.60 

G105-1 4,5 ml/12 x 75 mm 1000 / round bottom 28.30 

G105 4,5 ml/ 12 x 75 mm 4000 / round bottom 134.90 

Gripp stoppers, Polyethylene, natural 

Cat. # dimension Unit Price [USD] 

G109 16 mm 1000 19.90 

G110 12 mm 1000 18.50 

Sample Tube for "Coulter Counter“ 

Dust- and partikel free 25 ml tubes, made from optical clear polystyrene 

tight lid, parallele viewing areas, writing area 

Cat. # Volume Euro / 250 tubes USD / 1000 tubes 

G108 25 ml 18,00 69.35 

Shipping Containers for Patholgy 

Clear polypropylene with screw cap, rounded bottom for complete sample deloading, freestanding 

resistant to formaldehyde 

Cat. # Volume / Dimensions (WxH) Pack unit Price [USD] 

G111 20 ml/ 27 x 48 mm 1000 145.85 

G112 35 ml/ 34 x 55 mm 500 88.65 

G113 50 ml/ 34 x 75 mm 500 99.80 

G114 100 ml/ 43 x 88 mm 250 64.20 

Centrifugetubes for High Speed Rotors 

useful for preparative centrifugation, protein purification, extraction, density gradient centrifugation, 

centrifugation of biohazard materiales. Lids to order separately. 

Kat # Vol./Material/max rpm Dimension mm Filling Volume ml max. x g Price [USD]

HR-PC-10 10ml/ PC/ 24.000 16x80 9,4 57960 119.90 

HR-PPCO-10 10ml/ PPCO/ 24.000 16x80 8,9 57960 119.90 

HR-PE-10 10ml/ PE/ 18.000 16x80 9,7 32600 112.50 

HR-PF-10 10ml/ PF/ 20.000 16x80 9,4 40250 152.10 

HR-PC-30 30ml/ PC/ 24.000 25x92 27,9 64397 132.10 

HR-PPCO-30 30ml/ PPCO/ 24.000 25x92 25,9 64397 121.65 

HR-PE-30 30ml/ PE/ 10.000 25x92 24,5 11180 104.65 

HR-PF-30 30ml/ PF/ 24.000 25x92 26,4 64397 237.30 

HR-PC-50 50ml/PC/ 24.000 29x103 40 69549 172.55 

HR-PPCO-50 50ml/PPCO/ 24.000 29x103 38 69549 149.30 

HR-PE-50 50ml/PE/ 12.000 29x103 38,9 17387 122.15 

HR-PF-50 50ml/PF/ 18.000 29x103 42,6 39121 305.90 

HR-PC-80 80ml/PC/ 20.000 38x105 73,1 50086 174.65 

HR-PPCO-50 80ml/PP/ 20.000 38x105 76,3 50086 174.65 

HR-PE-80 80ml/PE/ 12.000 38x105 69,3 18031 151.40 

HR-PF-80 80ml/PF/ 15.000 38x105 73 28174 276.15 

HR-PC-250FB PC / FB/14.400 62x120, Flat bottom 232,5 33847 134.60 

HR-PPCO-250FB PPCO / FB/14.400 62x120, Flat bottom 225,1 33487 124.60 

HR-PE-250FB PE / FB/13.500 62x120, Flat bottom 239 29749 103.10 

HR-PC-250RB PC / RB/14.400 62x120, Round bottom 203,3 33847 174.65 

HR-PP-250RB PP / RB/14.400 62x120, Round bottom 213,3 33847 147.50 

HR-PPCO-250RB PPCO / RB/14.400 62x120, Round bottom 213,5 33847 171.20 

HR-PE-250RB PE / RB/13.500 62x120, Round bottom 213,5 29749 122.15 

HR-PC-290FB PC / FB/14.400 62x120 273,5 33847 156.95 

HR-PP-290FB PP / FB/14.400 62x120 263,4 33847 134.40 

HR-PE-290FB PE / FB/13.500 62x120 275,5 29749 122.15 

HR-PC-500FB PC / FB/10.500 70x165 432,1 20560 192.15 

HR-PPCO-500FB PPCO / FB/10.500 70x165 432,1 20560 137.90 

HR-PE-500FB PE / FB/9.500 70x165 431,5 14725 130.90 

HR-PC-750FB PC / FB/8.000 62x120 760 12042 157.15 

HR-PP-750FB PP / FB/8.000 62x120 762 12042 128.80 

HR-PC-1000FB PC / FB/4.000 98x175 816,3 4936 192.15 

HR-PP-1000FB PP / FB/4.000 98x175 887 4936 139.85 

Screw- and Sealing caps for Zentrfugetubes 

Cat # Description VE Price [USD] 

HR-PP-10-LID Screw caps PP for 10 ml HR 10 86.80 

HR-PF-10-LID screw cap PF for 10 ml HR 5 97.85 

HR-PP-30-LID screw cap PP for 30 ml HR 10 132.40 






HR-PP-250-LID seal cap PP for 250 ml HR 6 101.80 

HR-KSR-500 support for 500 ml HR 6 75.60

Material Transparency Temperature resistance 

PA – Polyallomer transparent autoclavable 

PC – Polycarbonate clear autoclavable 

PE – Polyethylene milky 

PF – Polyflor transparent autoclavable 

PP – Polypropylene transparent autoclavable 

PPCO – Polypropylene Copolymer transparent autoclavable 

Tubes direct fitting to: 

10 ml Beckman JA-21 + JS-24.15; Sigma 12111, 12141, 12157 + 12168 

30 ml 

Sigma 12139, 12158 + 12172; in 50 ml Rotoren mittels Adapter: Beckman JA-20; Sorvall SS-34, SA-600; Kontron 

AS4.13 

50 ml 

Sigma 12150, 12156 + 12160, Kontron A8.24, A12.17, AS 4.13 + AS 4.7; Beckman JA-20, JA-12, JA-17; Sorvall 

SS-34, SA-600 

80 ml Kontron A 8.20, AS 4.13; Sorvall SA-800; Beckman JA-18; Sigma 12155, 12159 + 12165 

250 ml 

Kontron A6.14 + AS 4.7; Sigma 11150,11180,11650, 11800 + 12256; Beckman JA-14, JLA-16.250 + JS-7.5; Sorvall 

GSA + HS-4 

290 ml Kontron A6.14; Beckman JA-14, JLA16.250 + JS-7.5; Sorvall GSA + SLA1500 

500 ml Kontron A6.9; Beckman JA-10; Sorvall GS-3, SLA-3000 + SLC-3000 

750 ml Sorvall SH-3000, TTH-750 + RTH-750; Beckman JS-4.3, SX4750, SX4750A; Hermle 220.70V06 

1000 

ml 

Sigma 12510, 11800 + 11801; Sorvall SLC-4000, SLC-6000, HL-4, H-4000 + H-6000; Beckman JS-4.0; Hermle 

220.70 V05 

Tubes for Ultracentrifuges 

Cat. # 

previous 

Kontron # 

material 

nominal 

Volume ml 

Filling- 

Volume ml 

size 

mm 

Max.rpm 

gefüllt 

UZ-PC-2 91-90289 PC-thickwall 2 0,6 08x51 45.000 

UZ-PA-2 91-90288 PA-thinwall 2 1,3 08x51 80.000 

UZ-PA-4,4 91-90212 PA-thinwall 4,4 3,3 11x60 80.000 

UZ-PC-4,4 91-90214 PC-thickwall 4,4 2,2 11x60 50.000 

UZ-PC-4,4- 

G 

91-90275 

PC-thickwall with 

thread 

4,4 2,7 11x60 50.000 

UZ-PA-5-1 91-90219 PA, thinwall 5 5 13x51 55.000 

UZ-PC-5-2 91-90224 PC-thickwall 5 3,4 13x51 55.000 

UZ-PA-5-2 91-90223 PC-thickwall 5 3,4 13x51 55.000 

UZ-PA-6,5- 

2 

UZ-PA-6,5- 

1 

91-90228 PC-thickwall 6,5 2,8 13x64 35.000 

91-90227 PA, thinwall 6,5 5,8 13x64 45.000 

UZ-PC-6,5 91-90229 PC-thickwall 6,5 2,8 13x64 40.000 

UZ-PC-6,5- 

2-G 

91-90241 

PC-thickwall with 

thread 

6,5 4,5 13x64 45.000 

UZ-PA-13,2 91-90221 PA, thinnwall 13,2 11,3 14x89 41.000 

UZ-PA-13,5 91-90202 PA-thinwall 13,5 11 16x76 80.000 

UZ-PC- 

13,5-2 

UZ-PC- 

13,5-2G 

91-90205 PC-thickwall 13,5 8,5 16x76 40.000 

91-90235 

PC-thickwall w. 

thread 

13,5 9,5 16x76 40.000 

UZ-PA-14 91-90215 PA, thinwall 14 12 14x95 41.000 

Price 

[USD] 

236.10 / 

50 

209.85 / 

50 

195.65 / 

50 

296.60 / 

50 

506.65 / 

50 

195.65 / 

50 

296.60 / 

50 

226.65 / 

50 

209.65 / 

50 

195.65 / 

50 

296.65 / 

50 

506.65 / 

50 

209.65 / 

50 

209.65 / 

50 

367.15 / 

50 

722.60 / 

50 

209.65 / 

50 

367.15 /

Top of Page 


UZ-PC-14 91-90382 PC-thickwall 14 9 14x95 30.000 

UZ-PA-17 91-90217 PA, thinwall 17 15,8 16x102 28.000 

UZ-PC-17 91-90195 PC-thickwall 17 12,5 16x102 28.000 

UZ-PC- 

38,5-2G 

UZ-PC- 

38,5-2 

UZ-PA- 

38,5-1 

UZ-PA- 

38,5-2 

91-90236 


thread 

38,5 32,5 25x89 50.000 

91-90299 PC-thickwall 38,5 29,0 25x89 50.000 

91-90196 PA, thinwall 38,5 34,0 25x89 70.000 

91-90198 PA, thickwall 38,5 29,0 25x89 45.000 

UZ-PA-94 91-90208 PA-thickwall 94 77 38x102 45.000 

UZ-PC-94- 

2 

UZ-PC-94- 

2-G 

91-90209 PC-thickwall 94 77 38x102 45.000 

91-90237 


thread 

94 88 38x102 40.000 

50 

209.65 / 

50 

402.15 / 

50 

839.10 / 

50 

414.10 / 

50 

209.85 / 

25 

296.65 / 

25 

206.10 / 

25 

367.15 / 

25 

489.10 / 

25 

UZ-4.4-LID 96-00165 Lid with O-ring for 4,4 ml tubes 147.65 / 3 

UZ-6.5-LID 96-00151 Lid with O-ring for 6,5 ml tubes 147.65 / 3 

UZ-13.5- 

LID 

UZ-38.5- 

LID 

UZ-94.5- 

LID 

96-00129 Lid with O-ring 



for 13,5 ml 

tubes 

for 38,5 ml 

tubes 

for 94,00 ml 

tubes 

147.65 / 3 

202.30 / 3 

226.65 / 3 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 








A personal chiller PCR-rack filled with special gel 




bench 


Print version 


KR-96 IsoFreeze PCR-Rack 2 racks with lid 69.80 

IsoFreeze PCR-SBS-Rack for automated Systems 

A personal chiller PCR-rack filled with special gel 

SBS-footprint useful for robotic systems 





useful for preparation of 0,2 ml PCR-tubes/-strips and PCR-plates 



KR-96-SBS IsoFreeze PCR-SBS-Rack 2 racks with lid 76.80 

IsoFreeze Microtube-Rack 

A personal chiller MCT-rack filled with special gel 





useful for preparation of 24 x 0,5 - 1,5 - 2,0 ml microtubes 

Dimensions with lid: 70 x 105 x 64 mm 


KR-24 IsoFreeze MCT-Rack 1 racks with lid 79.80 

IsoFreeze Tube-Racks 

A chiller PCR-rack for 20 tubes 0,5 ml or 1,5 / 2,0 ml 

both sides usable 

non toxic gel filling 

IsoFreeze "white" maintains the sample's temperature for 5 hours at 0°C 

IsoFreeze "blue" maintains the sample's temperature for 2 hours at -10°C 

an ideal help for the preparation of temperature sensitive samples 


KR-20W IsoFreeze-Rack "white" 1 rack with lid 99.80 

KR-20B IsoFreeze-Rack "blue" 1 rack with lid 99.80 

Ice Cool Buckets 

Ice Cool Buckets are constructed of durable plastic and offer both robustness and long 

life. They are durable skinned to provide long term storage of ice. In addition they are 

easily cleaned and their lips ensure easy handling. Fitting to the buckets are available 

acrylracks for the handling of microtubes in the ice. 

dimensions: KR-ICL: upper lipp 185x185mm, base 100x100mm, depth 175mm 

KR-ICS: 200 x 100mm 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

Cat. #. description Price [USD] 

KR-ICL ice cool bucket 4 Liter 84.37 

KR-ICS ice cool bucket 1,4 Liter 70.07 

KR-IC40 Rack for 40 x 0,5ml tubes 48.62 

KR IC16 Rack for 16 x 0,5/16 x1,5ml tubes 48.62 



Floater Microtube rack with flip top box 

a universally usable rack 

swim-and freeze resistant, autoclavable 

open bottom for placing in the ice 

removable lid 

Capacity: 24 x 1,5 / 2,0 ml tubes and 14 x 0,5 ml tubes 

Cat. #. Description Units Price [USD] 

R005 Floater microtube rack 1 rack 14.90 

Acryl-racks for Microtubes and 50ml Falcon-tubes 

Acryl-racks for 50 ml Falcon-tubes or tubes up to 29 mm diameter 

Acryl-racks for 1,5 and 2,0 ml microtubes or bis 10,7 mm diameter 

Cat. #. Description outer dimensions mm Price [USD] 

ST-A-10 10-place rack 230 x 90 x 100 99.80 




Pipettorstand 

Ergonomical: slightly curved to the user 

universal fitting for all pipettors 

material: easy to clean, 3 mm thick acryl 

outer dimensions: 20 x 12 x 10 cm (w x h x d) 

Cat. # Description Pack.unit Price [USD] 

R048 Pipettorstand, 4 places 1 63.60 

Tube Racks 

These racks made from autoclavable polypropylen are ideal for storage and drying of 

tubes are glas plates for electrophoresis 

they can also be used in a waterbath and drainage holes will cause racks to sink

Cat. # places dimensions 

R049-50 50 tubes 14-17mm 

R049-80 96 tubes 10-13mm 

TwoRow Rack, 2 x 10 Plätze für 1,5/2,0ml Tubes 

Made from autoclavable polypropylene, numericale places, 2 rows with 10 places each 

finger slot in the front 

interlocking for experiments with larger quantity of samples , 

dimensions 210x89x50mm 

188x100x86 mm 

LxWxH 

183x122x86mm 

LxWxH 

Price 

[USD] 

cat.# Description / Color Pack size Price [USD] 

R046-B TwoRow Rack, blue 1 rack 5.86 

R046-R TwoRow Rack, red 1 rack 5.86 

R046-W TwoRow Rack, white 1 rack 5.86 

Combi-Rack 

The 4-way rotatable Combi Rack is designed to accept a variety of tube sizes. The rack may be 

used place saving on a bench top or under a hood. It is manufactured from polypropylen and can 

be autoclaved or stored in a freezer up to -80°C. The racks can be fitted together on the flat sides, 

to get a higher number of storage possibilities. For better identification of the samples, the places 

are coded numerically. Following tubes can be placed: 

4 x 50 ml conical tubes or 12 x 15 ml conical tubes or 

32 x 12 x75 mm tubes or 32 x 1,5/2,0 ml tubes or 32 x 0,5 ml tubes 

Cat. # Color 

Pack 

size 

14.16 

12.73 

Price 

[USD] 

R001 neon mix 5 racks 37.90 

R001-B neon blue 1 rack 7.95 

R001-GR neon green 1 rack 7.95 

R001-GE neon yellow 1 rack 7.95 

R001-O neon orange 1 rack 7.95 

R001-P neon pink 1 rack 7.95 

Combi Rack Maxi 

Based on the popular Combi Rack principle it has a bigger dimension (100 x 100 x 200 mm) 

Following tubes can be placed: 

* 8 x 50 ml conical centrifuge tubes 

* 20 x 20 mm Ø tubes 

* 24 x 15 ml conical centrifuge tubes 

* 40 x 1,5/2,0 ml tubes (13 mm Ø) 

Cat. # Color Pack size Price [USD] 

R029-B neon blue 1 24.90 

RotaRack 

Four neon colored, interlocked rack-modules, where the modules can be rotated independently - 

made from autoclavable polypropylene 

the moduls have place for different tubes on each side 

R032-M for microtubes:6 x 15 ml; 9 x 1,5 / 2,0 ml; 12 x 0,5 / 0,6 ml

32 x 0,2 ml PCR-Tubes / 4 x 8-er PCR-strips 


R032-T for larger tubes:2 x 50 ml, 8 x 15 ml, 6 x 16-20 mm, 10 x 10-13 mm 


Cat. # Description Pack.size Price [USD] 

R032-M Rack for Microtubes (4 colored Modules) 1 32.90 

R032-T Rack für Tubes (4 colored Modules) 1 32.90 

Tube Cube System 

The Tube Cube System is also a 4-way rack consisting of 4 independent cubes, placed in a clear 

support tray. It is made of polypropylen and can be used in a freezer and be autoclaved. Each rack can 

be rotated indepently and following tubes can be accommodated in each rack: 

15 ml und 50 ml conical tubes 

12 x 75 mm tubes 


16 x 12,5 mm tubes 


1,5 ml und 2,0 ml centrifuge tubes 


R002 Neon mixed 4 Racks in tray 59.40 

Fraction collection Racks 

These very often used racks are ideal for storage, inventory and bench top work rack for 1,5 ml and 2,0 

ml tubes. Made of durable polypropylen, it can be autoclaved and stored down to -80°C. The 80 sample 

wells have a conical shape to concentrate samples collected directly into the rack. Each rack has a 

frosted labeling area and the wells, positioned in 5 rows with 16 places are numerical coded for easy 

identification. 

Cat. # Description / Color 

Pack 

size 

Price 

[USD] 

R003 Racks natural 5 racks 17.90 

R003-A Racks neon mix 5 racks 18.90 

R003-FB Rack neon blue 1 rack 3.90 

R003-FG Rack neon green 1 rack 3.90 

R003-FO Rack neon orange 1 rack 3.90 

R003-FP Rack neon pink 1 rack 3.90 

R003-FY Rack neon yellow 1 rack 3.90 

BestRacks, 64 and 96 places 

These double sided racks are made from durable polypropylen. The wide spacing allows easy 

handling and storage on one side of 64/96 x 1,5/2,0 ml tubes, on the reverse side of 64/96 x 0,5 

ml.The racks are autoclavable,identification of samples is easy through the alpha-numerical coding 

and the frosted writing area on the sides. Available as option is a transparent lid for storage or 

mixing tubes placed in the rack. 

Dimensions: 64 place Rack: 13,1 x 13,4 x 4,2 or 5,0 cm (WxLxH, 2 lid positions) 

96 place Rack: 11,8 x l2,3 x 4,7 or 4,9 cm ( WxLxH, 2 lid positions) 

Cat. # No. of places Pack size/ Color Price [USD] 

R006 64 5 racks neon mix 32.90 

R007 64 5 racks natural 32.90 

R006-B 64 1 rack neon blue 6.95 

R006-G 64 1 rack neon green 6.95 

R006-O 64 1 rack neon oran. 6.95 

R006-P 64 1 rack neon pink 6.95 

R006-Y 64 1 rack neon yellow 6.95

R008 Lid for 64 rack 1 lid natural 2.95 

R009 96 5 racks neon mix 36.90 

R010 96 5 racks natural 36.90 

R009-B 96 1 rack neon blue 8.90 

R009-G 96 1 rack neon green 8.90 

R009-O 96 1 rack neon oran. 8.90 

R009-P 96 1 rack neon pink 8.90 

R009-Y 96 1 rack neon yellow 8.90 

R011 Lid for 96 rack 1 lid natural 3.95 

96-Well Reversible Rack with snap in place lid for 0,5ml & 1,5/2,0 ml Tubes 

A user-friendly work and storage rack for 96 x 1,5/2,0 ml tubes on one side & 96 x 0,5 ml tubes on 

the other side. Made from autoclavable Polypropylene with longer handels, alpha numeric coding 

at the wells, labeling area on the lid. Colored pack includes blue, green, pink, yellow, orange 

Cat. # Description 

R041-1 96-Rev.Rack w.Lid 

R041 96-Rev.Rack w.Lid 

R041-A 96-Rev.Rack w.Lid 

Color/ 

quantity 

natural/ 1 

rack 

natural/ 5 

pack 

colored/ 5 

pack 

Price 

[USD] 

R041-B 96-Rev.Rack w.Lid blue/ 1 rack 12.50 

R041-GR 96-Rev.Rack w.Lid green/ 1 rack 12.50 

R041-Y 96-Rev.Rack w.Lid 

PCR-Rack, 96 Well with hinged, removable lid 

Autoclavable polypropylene rack for storage or working with 0,2 ml Tubes, 8 or 12 tube 

strips. Removable hinged lid, open wells for placing in ice bath, imprinted alpha-numerical 

system. Available in packs of 5 natural or colored (blue, green, pink, yellow, orange). 

yellow/ 1 

rack 

Cat.# description quantity Price [USD] 

R040-N PCR-Rack,natural 5 37.11 

R040-A PCR-Rack,colored mix 5 37.11 

R040-B PCR-Rack,blue 1 7.87 

R040-G PCR-Rack,green 1 7.87 

R040-Y PCR-Rack,yellow 1 7.87 

PCR-Stack Rack, 96 well with Telescope Lid 

Place saving and stackable, a click ensures, that the lid will not become easily dislodged 

safe stand through innovative and special design 

an autoclavable and robust storage- and work rack made from polypropylene 

temperature resistent from -80°C bis +121°C 

accommodates all 0,2 ml tubes, 8- or 12- PCR-tube-strips and PCR-plates 

Packing unit: five colored Racks (blue, green, yellow, violet, red) 

Cat. # Description Pack.unit Price [USD] 

R045-A PCR-Stack-Rack,farbig 5 36.90 

Combi PCR Rack 

A reversable polypropylene rack with a simple to use removable hinged lid, that snaps in place on 

both sides 

Side 1: places for 168 x 0,2 ml tubes (also for tubes in strip-form) and 12 x 1,5 ml tubes 

12.50 

57.00 

57.00 

12.50

Side 2: places for 40 x 0,5 ml and 12 x 1,5 ml tubes 

Cat.# description Color/ Quantity Price [USD] 

R044-1 96-Rev. Rack mit Deckel natural/ 1 rack 16.50 

R044 96-Rev. Rack mit Deckel natural/ 5 racks 69.00 

R044-A 96-Rev. Rack mit Deckel colored/ 5 racks 69.00 

PCR Workstation 

The PCR Workstation offers places for all tubes, needed for pre or post PCR applications. The 

PCR Workstation is a combination of a basic rack, which accepts 24 x 1,5/2,0 ml tubes, 16 x 0,5 

ml tubes und 32 x 0,2 ml tubes and a 96 place "Satelite" rack, which clips onto the workstation 

(over the existing 0,2 ml holes). This "Satelite" rack accomodates all 0,2ml PCR tube 

configurations, like single tubes, 8-strip-tubes, 12-strip tubes and PCR plates. All tube wells of the 

racks have an alpha-numeric identification system. The PCR Workstation can be used at 

temperatures down to -80°C. 

To reorder "Satelite" racks only, see chapter below. 



R028-G neon green 1 26.95 

R028-O neon orange 1 26.95 

R028-P neon pink 1 26.95 

R028-Y neon yellow 1 26.95 

PCR Satelite Racks for Workstation 

The PCR-Satelite rack fits into the basic rack of the workstation (Cat.# R028) 

Capacity 8 x 12 rows for 0,2 ml tubes, or 12x 8-strips or 1 PCR-plate 

Places are alphanummerical coded 


R028-S Neon mixed 5 Racks neon mix 32.50 

R028-SB neon blue 1 6.95 

R028-SG neon green 1 6.95 

R028-SO neon orange 1 6.95 

R028-SP neon pink 1 6.95 

R028-SY neon yellow 1 6.95 

VariRack 


filling volume 55ml, angeled sides and V-shaped bottom for nearly complete sample withdrawal 

available in clear PVC or white polystyrene 

R047-P: made from transparent polypropylene, autoclavable 

to use on both sides, 50 ml or 12 x 5 ml 

delivery inclusive lid 

Cat. # Pack.unit Price [USD] 

R43 5 natural 49,90 

R43-A 5 colored mix 55,90 




available in clear PVC or white polystyrene 

R047-P: made from transparent polypropylene, autoclavable 

to use on both sides, 50 ml or 12 x 5 ml

delivery inclusive lid 

Cat.# description Pack size Price [USD] 

R047 Reservoir transparent 10 6.90 

R047-W Reservoir white 10 6.90 

R047-P Reservoir transparent 5 19.95 

SemperGuard Latex Disposable Gloves 

Our gloves are very comfortable soft light yellow latex gloves, which provide a highly sensitive 

touch with extreme puncture. 

The gloves are: 

- powder free: no contamination of your samples with powder 

length: 24cm 

- packed: 10 boxes of 100 gloves 

Cat. # Description size Price [USD]/100 Price [USD]/1000 

MLG-S Latex powderfree small 11.50 99.80 

MLG-M Latex powderfree medium 11.50 99.80 

MLG-L Latex powderfree large 11.50 99.80 

Nitrile Disposable Gloves 

Our gloves are very comfortable soft blue nitrile gloves, which provide a highly sensitive touch with extreme 

puncture. They are extremly resistant against chemicals , especialy acrylamide and ethidium bromide which 

is used in many labs for gel staining procedures.Latex gloves do not provide saftey against ethidium 

bromide, because it passes latex in less than 1 minute. 

The nitrile gloves are: 


- latex free: no risk of manifesting latex allergies 

- protein free 

- resistant against mny chemicals and solvants 

- length: 24 cm 


Cat. # Description size Price [USD] 

MNG-SS-S Nitrile Gloves SafeSkin small 239.00 

MNG-SS-M Nitrile Gloves SafeSkin medium 239.00 

MNG-SS-L Nitrile Gloves SafeSkin large 239.00 

MNG-NT-S Nitrile Gloves SemperGuard small 129.00 

MNG-NT-M Nitrile Gloves SemperGuard medium 129.00 

MNG-NT-L Nitrile Gloves SemperGuard large 129.00 

Slide Boxes colored, for 100 Slides 

The slide boxes have cork liming on the bottom, to protect the slides. On the inside cover of the box is a 

corresponding inventory slide sheet. The boxes can be stored securely on top of each other and are closed 

with a rust resistant nickel plated clasp ande hinge pin.Dimensions are 222 x 171 x 33 mm ( LxWxH ) 

Optional we offer stainless steeel freezer racks to store the slide boxes in upright freezers for longtime 

storage of temperature sensitive samples. You find infos and prices in the chapter CRYO PRODUCTS. 

cat.# Color Pack size Price [USD] 

R100-B blue 1 7.08 

R100-G green 1 7.08 

R100-Y yellow 1 7.08 

R100-R red 1 7.08 

R100-W white 1 7.08 

R100-GRA grey 1 7.08 

R100-SCH black 1 7.08 

Embedding Cassettes for Histology 

The embedding cassettes are useful for paraffin-embedding of histological cuts. The cassetts are 

easy to write on the side and are resistant to solvents and decalcifying agents.We offer them in 

seven different colors 

biopsy cassette: base and lid with small holes 

universal cassette: base and lid slotted 

standard cassette without lid, bigger holes 

packaging unit: 500 cassettes

Top of Page 


Cat.# type of cassette color Price [USD] 

HBK-W Biopsy white 76.00 

HBK-RA Biopsy pink 76.00 

HBK-G Biopsy green 76.00 

HBK-Y Biopsy yellow 76.00 

HBK-B Biopsy blue 76.00 

HBK-R Biopsy red 76.00 

HBK-GRA Biopsy grey 76.00 

HUK-W Universal white 67.80 

HUK-RA Universal pink 67.80 

HUK-G Universal green 67.80 

HUK-Y Universal yellow 67.80 

HUK-B Universal blue 67.80 

HUK-R Universal red 67.80 

HUK-GRA Universal grey 67.80 

HSK-W Standard white 45.50 

HSK-RA Standard pink 45.50 

HSK-G Standard green 45.50 

HSK-Y Standard yellow 45.50 

HSK-B Standard blue 45.50 

HSK-R Standard red 45.50 

HSK-GRA Standard grey 45.50 

PAP PEN 

PAP PEN is designed to provide a water repellant barrier when a circle is 

drawn around a specimen. The barrier of the PAP PEN retains antisera 

within the defined area and ensures, that only the amount of antobody 

needed for sufficient reaction is used. The PAP PEN stops spreading, 

reduces waste and divides slides into discret areas for immunostaining, 

histology, cytology, cell culture, virology, microbiology. The PAP PEN is 

effective for immunostaining, PAP method, ABC method, ASD method, 

enzyme and frozen section methods. 

The staining is unsoluble in aceton and alcohol and can be removed if 

desired by xylene after the staining procedure. 

Cat. # Description Price [USD] 

MKP-1 Pap Pen Immunostaining Pen 53.80 

MKP-2 Pap Pen Immunostaining Pen, extra thick 69.50 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Quali Stickers, "hot - cold" 

Quali - Stickers are precutted labels for tubes 0,2 - 2,0ml. They are convenient to use, simply write 

on the label, peel of from the backing paper and press into position on the tube. Quali - Stickers 

are temperature resistant from -196°C to +121°C. 

Quali - stickers adhere to all plastics, they will not smear, dry out, peel or fall off. Quali stickers 

can be used in freezers, liquid nitrogen and boiling water. They will accept all marker pens and are 

supplied in rolls of 1000 stickers, exept the laser stickers, which are supplied on sheets and come 

with printing instructions. 

Cat. # size For tubes 

Pack 

size 

Print version 

Price 

[USD] 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 St 45.62 

HK-95-L 9,5 mm D for Laserprint 3840 St 187.19 

HK-12-L 13 mm D for Laserprint 3840 St 187.19 

HK-L 32,5 x 13 mm for Laserprint 2040 St 106.89 

Cryoboxes with telescope lid for 50 0,5 ml or 1,5/2,0 ml tubes 

made from stabel transparent polypropylene 

can be used from -80°C to 121°C 

dimensions: 

R012: 121 x 62 x 37 mm ( W x D x H ) 

R013: 146 x 67 x 38 mm ( W x D x H ) 

Cat. # Places / ml color Pack size Price [USD] 

R012 50x0,5 natural 5 15.90 

R013 50x1,5/2,0 natural 5 15.90 

Cryoboxes with hinged lid for 50 and 100 1,5/2,0 ml tubes 

The 100 place cryobox features a three point hinged lid, that locks for secure lid closure. The 100 

place cryobox also features imprinted coordinates on the base and molded grid lines on the lid. 

The neon mixed versions include blue, green, pink, yellow and orange. The cryobox withstands - 

80°C and the hinged lid is easy to openeven when frozen. 

dimension: R030: 141 x 80 x 55 mm ( W x D x H ) 

dimension: R031: 141 x 155 x 55 mm ( W x D x H ) 

Cat. # Places / ml color 

Pack 

size 

Price 

[USD] 

R030 50x1,5/2,0 natural 5 32.43 

R030-A 50x1,5/2,0 neon mix 5 33.56 

R031 100x1,5/2,0 natural 5 44.44 

R031-A 100x1,5/2,0 neon mix 5 41.38 

Cryoboxes made of Polycarbonat for low temperature storage to -196°C (liquid 

nitrogen-usable) 

These Cryoboxes are made of extra strong Polycarbonat. The transparent lid makes 

view of samples easy. A numerical coding on each tube-place of the base minimizes 

possible errors without haveing a special lid. The Cryoboxes have holes and vents in 

base and lid for rapid draining of liquid nitrogen. The boxes can be used in a 

temperature range from -196°C to +121°C and are usable with liquid nitrogen. 

specificationes: draining slots in the bottom 

air-holes in the lid to avoid condensation 

autoclavable 

crystal clear lid 

dimensions: RCP-25: 76x76x54 mm (WxDxH); RCP-100 133x133x54 mm (WxDxH) 

Cat. # Places Color Units Price [USD] 

RPC-25B 25 blue 1 5.89 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

RPC-25G 25 green 1 5.89 

RPC-25R 25 red 1 5.89 

RPC-25Y 25 yellow 1 5.89 

RPC-100B 100 blue 1 10.79 

RPC-100G 100 green 1 10.79 

RPC-100R 100 red 1 10.79 

RPC-100Y 100 yellow 1 10.79 

Quali-Box, 96 place Cryo Card Box for 1,5 & 2,0 ml Tubes 

Makes sampel storage easy: in the 96 format of your experiments 

Expanded places for easy handling of your tubes. 

White card box made from deep temperature resistant waterproofed cardboard material. 

Dimensions: 174 x 122 x 51 mm 

Divider: 8 x 12 places/ 30 mm hight 

Cat.# Description size Price [USD] 

R096 Quali-96 place Box 174x122x51 mm 8.69 

Cryobox wit telescope lid, our 81 place topversion, impoved version 

Only this 81 place cryobox has imprinted coordinates on the base, the lid is now glas clear for 

better sample identification. 

These polypropylene cryobox can be stored up to -150°C, autoclaved and is available in neon 

colors blue, green, orange, pink and yellow. 

Dimensions: R14 & R15: 130 x 130 x 45 mm ( W x D x H ) 

Cat. # Color 

Pack 

size 

Price 

[USD] 

R014 natural 5 27.28 

R015 neon mix 5 27.28 

R014-1 natural 1 5.50 


R015-GR neon green 1 5.50 

R015-GE neon yellow 1 5.50 

R015-O neon orange 1 5.50 

R015-P neon pink 1 5.50 

Economy Cryobox Serie with Telescope lid, size 130 x 130 x 45 mm 

This box made from deep temperature resistant polypropylene, freezable up to -190°C and 

autoclavable. Transparent telescope lid for easy sample identification. The boxes with 9 x 9 

dividers are available in differnt colours: 5 x neon, 7 x standard. The boxes with other dividers or 

blank boxes are neon coloured and can be delivered in other colours on request. 

9 x 9 places 1-49 units 50+units 

Cat. # Colour Euro Price [USD] 

R034 natural 4 4.29 

R034-NGE neon-yellow 4 4.29 

R034-NBL neon-blue 4 4.29 

R034-NGR neon-green 4 4.29 

R034-NPI neon-pink 4 4.29 

R034-NOR neon-orange 4 4.29 

9 x 9 Plätze 1-49 units 50+ units 

Cat. # clour Price [USD] Price [USD] 

R034-W white 4 4.29 

R034-GE yellow 4 4.29 

R034-BL blue 4 4.29 

R034-GR green 4 4.29 

R034-RO red 4 4.29

R034-PI pink 4 4.29 

R034-SW black 4 4.29 


Cat. # colour Price [USD] Price [USD] 

R034-7 natural 4,85 5.12 

R034-7-NGE neon-yellow 4,85 5.12 

R034-7-NBL neon-blue 4,85 5.12 

R034-7-NGR neon-green 4,85 5.12 

R034-7-NPI neon-pink 4,85 5.12 

R034-7-NOR neon-orange 4,85 5.12 

8 x 8 places 1-49 units 50+ units 

Cat. # Colour Price [USD] Price [USD] 

R034-8 natural 4,7 4.95 

R034-8-NGE yellow 5,1 5.45 

R034-8-NBL blue 5,1 5.45 

R034-8-NGR green 5,1 5.45 

R034-8-NPI pink 5,1 5.45 

R034-8-NOR orange 5,1 5.45 

Box without divider 1-49 units 50+units 

Cat. # Colour Price [USD] Price [USD] 

R034-B natural 3 3.14 

R034-B-NGE neon-yellow 3 3.14 

R034-B-NBL neon-blue 3 3.14 

R034-B-NGR neon-green 3 3.14 

R034-B-NPI neon-pink 3 3.14 

R034-B-NOR neon-orange 3 3.14 

Dividers 30 mm high 1-49 units 50+ units 

Cat. # places for Tubes Price [USD] Price [USD] 

R034-R-13 13x13 3,6 3.85 

R034-R-12 12x12 2,7 2.86 

R034-R-10P 10x10 Plastic 2 2.09 

R034-R-9P 9x9 Plastic 2,25 2.37 

R034-R-8P 8x8 Plastic 2,25 2.37 

R034-R-7 7x7 2,25 2.37 

Cryoboxes made from Polypropylene 130 x130 mm, variable Hight 70 - 80 mm 

made from ridid ultra low temperature polypropylen with hightransparent lid, neon - colours, 

storage up to 80°C possible, autoclavable. 

Cat.# for Tubes mm Ø places dimension in mm Price [USD] 

R039-natural 12,5 9 x 9 130x130x70-80 6.05 

R039-yellow 12,5 9 x 9 130x130x70-80 6.49 

R039-blue 12,5 9 x 9 130x130x70-80 6.49 

R039-green 12,5 9 x 9 130x130x70-80 6.49

R039-red 12,5 9 x 9 130x130x70-80 6.49 

R039-orange 12,5 9 x 9 130x130x70-80 6.49 

R039-7-natural 16,5 7 x 7 130x130x70-80 6.49 

R039-7-yellow 16,5 7 x 7 130x130x70-80 6.49 

R039-7-blue 16,5 7 x 7 130x130x70-80 6.49 

R039-7-green 16,5 7 x 7 130x130x70-80 6.49 

R039-7-red 16,5 7 x 7 130x130x70-80 6.49 

R039-7-orange 16,5 7 x 7 130x130x70-80 6.49 

R039-1-natural without divider 1 130x130x70-80 4.84 

R039-1-yellow without divider 1 130x130x70-80 5.67 

R039-1-blue without divider 1 130x130x70-80 5.67 

R039-1-green without divider 1 130x130x70-80 5.67 

R039-1-red without divider 1 130x130x128 5.67 

R039-1-orange without divider 1 130x130x128 5.67 

Dividers 

Cat. # for Tubes Hight Price [USD] 

R039-R-13 8 30 mm 4.07 

R039-R-12 9 30 mm 2.97 

R039-R-10P 12 30 mm 2.09 

R039-R-9P 13 30 mm 2.31 

R039-R-8P 14 30 mm 2.31 

R039-R-7 16,5 30 mm 2.31 

R039-R-6 19,5 30 mm 3.03 

R039-R-5 23,5 30 mm 2.09 

R039-R65-13 8 65 mm 4.29 

R039-R65-12 9 65 mm 3.30 

R039-R65-10 12 65 mm 3.30 

R039-R65-9 13 65 mm 3.30 

R039-R65-8 14 65 mm 3.30 

R039-R65-7 16,5 65 mm 3.30 

R039-R65-6 19,5 65 mm 3.30 

R039-R65-5 23,5 65 mm 3.30 

Cryoboxes Polypropylene for 0,2 ml -- 0 ,5 ml -- 15 ml and 50 ml Tubes 

made from ridid ultra low temperature polypropylen with hightransparent lid, neon - colours, 

storage up to 190°C possible, autoclavable. 

Cat.# Tubes places size in mm Price [USD] 

R035-natural PCR 0,2ml 12x12 130x130x32 7.79 

R035-yellow PCR 0,2ml 12x12 130x130x32 7.79 

R035-blue PCR 0,2ml 12x12 130x130x32 7.79 

R035-green PCR 0,2ml 12x12 130x130x32 7.79 

R035-red PCR 0,2ml 12x12 130x130x32 7.79 

R035-orange PCR 0,2ml 12x12 130x130x32 7.79 

R036-natural Mini 0,5ml 10x10 130x130x37 8.26 

R036-yellow Mini 0,5ml 10x10 130x130x37 8.26 

R036-blue Mini 0,5ml 10x10 130x130x37 8.26 

R036-green Mini 0,5ml 10x10 130x130x37 8.26 

R036-red Mini 0,5ml 10x10 130x130x37 8.26 

R036-orange Mini 0,5ml 10x10 130x130x37 8.26 

R037-natural Cell Box 15ml 25 130x130x128 11.56

R037-yellow Cell Box 15ml 25 130x130x128 11.56 

R037-blue Cell Box 15ml 25 130x130x128 11.56 

R037-gree Cell Box 15ml 25 130x130x128 11.56 

R037-red Cell Box 15ml 25 130x130x128 11.56 

R037-orange Cell Box 15ml 25 130x130x128 11.56 

R038-natural Cell Box 50ml 10x50ml + 2x15ml 130x130x128 12.03 

R038-yellow Cell Box 50ml 10x50ml + 2x15ml 130x130x128 12.03 

R038-blue Cell Box 50ml 10x50ml + 2x15ml 130x130x128 12.03 

R038-green Cell Box 50ml 10x50ml + 2x15ml 130x130x128 12.03 

R038-red Cell Box 50ml 10x50ml + 2x15ml 130x130x128 12.03 

R038-orange Cell Box 50ml 10x50ml + 2x15ml 130x130x128 12.03 

Stainless Steal Inventory racks 

Inventory racks with handle for chest units for cryoboxes up to 136 x 136 mm square in 

50/75/100/130 mm hight 

Cat. # Quantity/ Boxhight W x D x H in mm Price [USD] 

TG-5 5 x 50mm 141 x 141 x 281 94.60 

TG-6 6X 50mm 141 x 141 x 336 103.40 

TG-7 7 x 50mm 141 x 141 x 391 97.90 

TG-8 8 x 50mm 141 x 141 x 446 100.10 

TG-9 9 x 50mm 141 x 141 x 499 100.10 

TG-10 10 x 50mm 141 x 141 x 554 102.30 

TG-11 11 x 50mm 141 x 141 x 609 100.10 

TG-12 12 x 50mm 141 x 141 x 664 101.20 

TG-13 13 x 50mm 141 x 141 x 719 119.90 

TG-14 14 x 50mm 141 x 141 x 774 129.80 

TG-75-4 4 x 75mm 141 x 141 x 325 89.10 

TG-75-6 6 x 75mm 141 x 141 x 485 90.20 

TG-75-7 7 x 75mm 141 x 141 x 565 91.30 

TG-75-8 8 x 75mm 141 x 141 x 645 108.90 

TG-75-9 9 x 75mm 141 x 141 x 725 121.00 

TG-75-10 10 x 75mm 141 x 141 x 805 137.50 

TG-100-3 3 x 100mm 141 x 141 x 320 117.70 

TG-100-4 4 x 100mm 141 x 141 x 425 121.00 

TG-100-5 5 x 100mm 141 x 141 x 530 122.10 

TG-100-6 6 x 100mm 141 x 141 x 635 129.80 

TG-100-7 7 x 100mm 141 x 141 x 740 137.50 

TG-130-3 3 x 130mm 141 x 141 x 410 135.30 

TG-130-4 4 x 130mm 141 x 141 x 545 140.80 

TG-130-5 5 x 130mm 141 x 141 x 680 152.90 

Further sizes and custom manufacturing on request 

Stainless steel racks for upright freezers 

Inventory racks with handle for Upright freezers for boxes up to 136 x 136 mm square in 

32/50/75/100mm hight 

Cat. # no boxes x boxenhight Dimmension Price [USD]

SG-32-15 3 x 5 x 32mm 142 x 425 x 185 172.70 

SG-32-18 3 x 6 x 32mm 142 x 425 x 224 184.80 

SG-32-21 3 x 7 x 32mm 142 x 425 x 264 196.90 

SG-32-20 4 x 5 x 32mm 142 x 565 x 185 184.80 

SG-32-24 4 x 6 x 32mm 142 x 565 x 224 193.60 

SG-32-28 4 x 7 x 32mm 142 x 565 x 264 204.60 

SG-8 4 x 2 x 50mm 142 x 285 x 223 167.20 

SG-9 3 x 3 x 50mm 142 x 425 x 169 149.60 

SG-10 2 x 5 x 50mm 142 x 285 x 277 176.00 

SG-12 3 x 4 x 50mm 142 x 425 x 223 151.80 

SG-15 3 x 5 x 50mm 142 x 425 x 277 172.70 

SG-16 4 x 4 x 50mm 142 x 565 x 223 170.50 

SG-20 4 x 5 x 50mm 142 x 565 x 277 212.30 

SG-75-6 3 x 2 x 75mm 142 x 425 x 163 133.10 

SG-75-8 4 x 2 x 75mm 142 x 565 x 163 138.60 

SG-75-9 3 x 3 x 75mm 142 x 425 x 242 166.98 

SG-75-10 5 x 2 x 75mm 142 x 705 x 163 215.38 

SG-75-12 4 x 3 x 75mm 142 x 565 x 242 188.76 

SG-100-6 3 x 2 x 100mm 142 x 425 x 212 164.56 

SG-100-8 4 x 2 x 100mm 142 x 565 x 212 188.76 


Stainless steel racks for upright freezers with pull-out stopp 

Inventory racks with handle for Upright freezers for boxes up to 130 x 130 mm square in 50mm 

hight 

perfect overview 

no pull out of complete racks, to handle the boxes 

racks for 136x136x50mm cardboxes on request 

Cat. # no boxes x boxenhight Dimmension Price [USD] 

SGSA-2/2 2 x 2 140x301x123 207.55 

SGSA-2/3 2 x 3 140x301x184 214.20 

SGSA-2/4 2 x 4 140x301x245 229.27 

SGSA-2/5 2 x 5 140x301x306 246.58 

SGSA-2/6 2 x 6 140x301x367 262.15 

SGSA-3/2 3 x 2 140x434x123 220.62 

SGSA-3/3 3 x 3 140x434x184 227.55 

SGSA-3/4 3 x 4 140x434x245 236.19 

SGSA-3/5 3 x 5 140x434x306 250.03 

SGSA-3/6 3 x 6 140x434x367 267.33 

SGSA-4/2 4 x 2 140x567x123 224.08 

SGSA-4/3 4 x 3 140x567x184 229.27 

SGSA-4/4 4 x 4 140x567x245 237.92 

SGSA-4/5 4 x 5 140x567x306 253.50 

SGSA-4/6 4 x 6 140x567x367 270.80 

SGSA-5/2 5 x 2 140x700x123 248.30 

SGSA-5/3 5 x 3 140x700x184 253.50 

SGSA-5/4 5 x 4 140x700x245 259.38 

SGSA-5/5 5 x 5 140x700x306 286.37 

SGSA-5/6 6 x 6 140x700x367 303.68 


Inventory Racks for Microtiter Plates in format 86 x 128 x 18 mm

Vertical stainless steel racks for chest freezer 


Cat. # no boxes x hight w x d x h in mm Price [USD] 

MTG-15 15 x 18mm 91 x 133 x 305 145.95 

MTG-16 16 x 18mm 91 x 133 x 325 150.37 

MTG-17 17 x 18mm 91 x 133 x 345 154.77 

MTG-18 18 x 18mm 91 x 133 x 365 159.19 

MTG-19 19 x 18mm 91 x 133 x 385 163.69 

MTG 20 20 x 18mm 91 x 133 x 405 168.09 

MTG-21 21 x 18mm 91 x 133 x 425 172.51 

MTG-22 22 x 18mm 91 x 133 x 445 176.92 

MTG-23 23 x 18mm 91 x 133 x 465 181.34 

MTG-24 24 x 18mm 91 x 133 x 485 185.83 

MTG-25 25 x 18mm 91 x 133 x 505 190.17 

MTG-26 26 x 18mm 91 x 133 x 525 194.67 

MTG-27 27 x 18mm 91 x 133 x 545 199.07 

MTG-28 28 x 18mm 91 x 133 x 565 204.35 

MTG-29 29 x 18mm 91 x 133 x 585 207.89 

MTG-30 30 x 18mm 91 x 133 x 605 212.31 

MTG-31 31 x 18mm 91 x 133 x 625 216.72 

MTG-32 32 x 18mm 91 x 133 x 645 221.13 

MTG-33 33 x 18mm 91 x 133 x 665 225.63 

MTG-34 34 x 18mm 91 x 133 x 685 230.04 

MTG-35 35 x 18mm 91 x 133 x 705 234.47 

MTG-36 36 x 18mm 91 x 133 x 725 239.73 

MTG-37 37 x 18mm 91 x 133 x 745 243.29 

MTG-38 38 x 18mm 91 x 133 x 765 247.69 

Stainless Steal Racks for upright freezers with pull-out-stopp for Microtiterplates 86 

x 128 x 18mm 

Horizontal stainless steel racks with pullout-stop for upright freezers 


Cat. # number of plates w x d x h in mm Price [USD] 

MSG-4/8 4 x 8 135x379x209 245.10 

MSG-4/9 4 x 9 135x379x235 261.02 

MSG-4/10 4 x 10 135x379x261 275.99 

MSG-4/11 4 x 11 135x379x287 289.31 

MSG-4/12 4 x 12 135x379x313 304.36 

MSG-4/13 4 x 13 135x379x339 317.60 

MSG-4/14 4 x 14 135x379x365 331.78 

MSG-4/15 4 x 15 135x379x391 346.75 

MSG-4/16 4 x 16 135x379x417 360.07 

MSG-5/8 5 x 8 135x465x209 254.35 

MSG-5/9 5 x 9 135x465x235 270.70 

MSG-5/10 5 x 10 135x465x261 284.64 

MSG-5/11 5 x 11 135x465x287 298.49 

MSG-5/12 5 x 12 135x465x313 313.02 

MSG-5/13 5 x 13 135x465x339 327.20

MSG-5/14 5 x 14 135x465x365 341.39 

MSG-5/15 5 x 15 135x465x391 355.59 

MSG-5/16 5 x 16 135x465x417 369.77 

MSG-6/8 6 x 8 135x551x209 262.76 

MSG-6/9 6 x 9 135x551x235 278.66 

MSG-6/10 6 x 10 135x551x261 292.85 

MSG-6/11 6 x 11 135x551x287 306.96 

MSG-6/12 6 x 12 135x551x313 321.15 

MSG- 6/13 6 x 13 135x551x339 335.32 

MSG- 6/14 6 x 14 135x551x365 349.44 

MSG- 6/15 6 x 15 135x551x391 363.62 

MSG- 6/16 6 x 16 135x551x417 377.73 

Truhen- / Schrankgestelle in Modulform für Plastikboxen bis 130 x 130 x 50 mm (L x 

B x H) 

a variable system supplied as single shelves for boxes 130 x 130 x 50 mm (L x B x H) 

shelves can be stacked together as needed for your upright or chest freezer 

holders are available also for use in upright or chest freezer 

shelves are made from polypropyle, handels from stainless steel 

working range up to - 80°C 

Cat. # Quantity Boxes hight x depth pack size Price [USD] 

TGSG-M shelves 25 149.00 

TGSG-H handel for chest 1 6.60 

TGSG-V handel for upright 1 6.60 

Stainless Steal Racks for upright freezers stopp for Slide Boxes, Typ R100, 222 x 

171 x 33 mm,LxWxH L 

Cat. # Quantity Boxes hight x depth B x L x H in mm Price [USD] 

OSG-5/2 5 x 2 187 x 466 x 189 328.76 

OSG-6/2 6 x 2 187 x 466 x 227 377.20 

OSG-7/2 7 x 2 187 x 466 x 264 429.11 

OSG-8/2 8 x 2 187 x 466 x 302 484.48 

OSG-5/3 5 x 3 187 x 688 x 189 361.64 

OSG-6/3 6 x 3 187 x 688 x 227 423.93 

OSG-7/3 7 x 3 187 x 688 x 264 484.48 

OSG-8/3 8 x 3 187 x 688 x 302 545.05 

EPPI-Box A : Cryo and Storage Boxes 

For storage of samples, material made from deep temperature resisting 

waterproofed cardbox (st=standard) or with additional special waterproofed plastic 

cover( sp= special). All boxes are supplied with lid and dividers as described in 

different colors: 

WE= white / GE = yellow / BL = blue / GR = green / RO = red 

-1 = standard; -2 = special 

0,2 ml 0,5 ml + 0,75 ml 1,5 ml + 2,0 ml 1,5 ml + 2,0 ml 

EPPI-PCR A 0,2 EPPI-Mini A 0,5 EPPI-Basic A 1,5 EPPI-Maxi A 1,5 

16 x 16 places, 

136x136x25 mm 


136x136x32 mm 


136x136x50 mm 


140x140x50 mm

Cat. # Price [USD] Cat. # Price [USD] Cat.# Price [USD] Cat. # Price [USD] 

301115WE-1 9.52 301016WE-1 7.45 301100WE-1 5.54 301014WE-1 7.27 

301115WE-2 11.33 301016WE-2 9.26 301100WE-2 7.61 301014WE-2 9.34 

301115GE-1 10.40 301016GE-1 9.34 301100GE-1 8.73 301014GE-1 9.00 

301115GE-2 12.21 301016GE-2 11.59 301100GE-2 11.42 301014GE-2 11.67 

301115BL-1 10.40 301016BL-1 9.34 301100BL-1 8.73 301014BL-1 9.00 

301115BL-2 12.21 301016BL-2 11.59 301100BL-2 11.42 301014BL-2 11.67 

301115GR-1 10.40 301016GR-1 9.34 301100GR-1 8.73 301014GR-1 9.00 

301115GR-2 12.21 301016GR-2 11.59 301100GR-2 11.42 301014GR-2 11.68 

301115RO-1 10.40 301016RO-1 9.34 301100RO-1 8.73 301014RO-1 9.00 

301115RO-2 12.21 301016RO-2 11.59 301100RO-2 11.42 301014RO-2 11.68 

Eppi Box A: Cryoboxes long version 

Same specification as described before, but in long form and double capacity 


EPPI-PCR A 0,2 "long" EPPI-Mini A 0,5 "long" EPPI-Basic A 1,5 "long" EPPI-Maxi A 1,5 "long" 


136x268x25 mm 


136x268x32 mm 


136x268x50 mm 


140x276x50 mm 

Cat. # Price [USD] Cat. # Price [USD] Cat. # Price [USD] Cat. # Price [USD] 

301115LWE-1 19.91 301016LWE-1 18.00 301100LWE-1 16.79 301014LWE-1 19.03 

301115LWE-2 23.71 301016LWE-2 19.91 301100LWE-2 18.68 301014LWE-2 20.68 

301115LGE-1 21.78 301016LGE-1 20.16 301100LGE-1 18.68 301014LGE-1 20.33 

301115LGE-2 25.36 301016LGE-2 22.50 301100LGE-2 20.42 301014LGE-2 22.06 

301115LBL-1 21.78 301016LBL-1 20.16 301100LBL-1 18.68 301014LBL-1 20.33 

301115LBL-2 25.36 301016LBL-2 22.50 301100LBL-2 20.42 301014LGL-2 22.06 

301115LGR-1 21.78 301016LGR-1 20.16 301100LGR-1 18.68 301014LGR-1 20.33 

301115LGR-2 25.36 301016LGR-2 22.50 301100LGR-2 20.42 301014LGR-2 22.06 

301115LRO-1 21.78 301016LRO-1 20.16 301100LRO-1 18.68 301014LRO-1 20.33 

301115LRO-2 25.36 301016LRO-2 22.50 301100LRO-2 20.42 301014LRO-2 22.06 

CellBox Tissue Culture; Cryo and Storage boxes for 15 ml and 50 ml Tubes 

For storage of samples in tubes, boxes are made from deep temperature resisting 

waterproofed cardbox( st= standard) or with additional special waterproofed plastic 

cover (sp = special). All boxes are supplied with lid and divders and available in 


WE = white/ GE = yellow / BL = blue / GR= green / RO = red 

-1 = standard -2 = special 

Useful for all tubes up to 22mm Ø(for 15ml) or 34mm Ø (for50 ml) and a total 

lenght of 125mm 

15ml 15ml 50ml 50ml 

CellBox-Mini CellBox-Maxi CellBox-Mini CellBox-Maxi 

5x5 places, 122x122x128 mm 6x6 places, 148x148x128 mm 

3x3 places, 

122x122x128 

mm 

4x4 places, 

148x148x128 

mm 


301017WE-1 15.40 301019WE-1 16.18 301018WE-1 14.72 301020WE-1 15.58 

301017WE-2 17.66 301019WE-2 18.60 301018WE-2 16.95 301020WE-2 17.91 

101017GE-1 18.10 301019GE-1 19.21 301018GE-1 17.39 301020GE-1 18.35

301017GE-2 20.41 301019GE-2 21.64 301018GE-2 19.64 301020GE-2 20.77 

301017BL-1 18.10 301019BL-1 19.21 301018BL-1 17.39 301020BL-1 18.35 

301017BL2 20.41 301019BL-2 21.64 301018BL-2 19.64 301020BL-2 20.77 

301017GR-1 18.10 301019GR-1 19.21 301018GR-1 17.39 301020GR-1 18.35 

301017GR-2 20.41 301019GR-2 21.64 301018GR-2 19.64 301020GR-2 20.77 

301017RO-1 18.10 301019RO-1 19.21 301018RO-1 17.39 301020RO-1 18.35 

301017RO-2 20.41 301019RO-2 21.64 301018RO-2 19.64 301020RO-2 20.77 

CellBox Cellculture; freezing- and storageboxes for 15 ml and 50 ml Falcons, long 

version 



CellBox-Mini "long" CellBox-Maxi "long" CellBox-Mini "long" CellBox-Maxi "long" 

5x10 places, 

122x240x128 mm 

6x12 places, 

148x291x128 mm 

3x6 places, 

122x240x128 mm 

4x8 places, 

148x291x128 mm 


301140WE-1 21.62 301142WE-1 22.50 301141WE-1 20.68 301143WE-1 21.54 

301140WE-2 24.75 301142WE-2 25.87 301141WE-2 23.79 301143WE-2 24.75 

301140GE-1 25.63 301142GE-1 26.57 301141GE-1 24.40 301143GE-1 25.43 

301140GE-2 27.34 301142GE-2 27.69 301141GE-2 26.73 301143GE-2 26.91 

301140BL-1 25.63 301142BL-1 26.57 301141BL-1 24.40 301143BL-1 25.43 

301140BL-2 27.34 301142BL-2 27.69 301141BL-2 26.73 301143BL-2 26.91 

301140GR-1 25.63 301142GR-1 26.57 301141GR-1 24.40 301143GR-1 25.43 

301140GR-2 27.34 301142GR-2 27.69 301141GR-2 26.73 301143GR-2 26.91 

301140RO-1 25.63 301142RO-1 26.57 301141RO-1 24.40 301143RO-1 25.43 

301140RO-2 27.34 301142RO-2 27.69 301141RO-2 26.73 301143RO-2 26.91 

Cardboxes 

Cardboxes for storage of samples, 136 x 136 mm square, 32/50/75/100/130 mm high, 

material made from deep temperature waterproofed cardbox, with special water resistant 

plastic cover. The boxes are available in different hights and can be used with the listed 

dividers for tubes from 8 - 21 mm Ø. 

Cat. # Description Size Price [USD] 

SB-32 box 32mm 4.24 

SB-50 box 50mm 3.03 

SB-75 box 75mm 4.68 

SB-100 box 100mm 8.73 

SB-130 box 130mm 10.30 

Divider / Ø tube 

SB-R-4 divider 4 x 4/31mm 3.11 

SB-R-5 divider 5 x 5 / 21mm 2.61 






SB-R-12 divider 12 x 12 / 10mm 2.61

Top of Page 


SB-R-13 divider 13 x 13/9mm 4.24 


Further boxes with other sizes, e.g. 133 x 133 mm base are availble on request. 

Value Line Cryotubes, steril, polypropylen, external thread, freestanding 

Cryotubes with safety lid made from high quality polypropylene. Silicone free, no risk for 

contaminations. Tight sealing screw cap with Safe-Sealing Lip. Simple handling by star-bottom. 

DNase-, RNase-, endotoxin- and cadmium free. 

Cat. # Volume Unit Price [USD] 

CV-VL-1 1,2ml 1 x 100 23.60 

CV-VL-1 1,2ml 10 x 100 207.35 

CV-VL-2 2,0ml 1 x 100 23.60 

CV-VL-2 2,0ml 10 x 100 207.35 

CV-VL-4 4,0ml 1 x 100 25.45 

CV-VL-4 4,0ml 5 x 100 114.11 

CV-VL-5 5,0ml 1 x 100 25.45 

CV-VL-5 5,0ml 5 x 100 114.11 

Coulored Cap inserts for CV-VL Linie 

Coulored Cap Inserts fitting into the lids of the cryotubes for easy identification; delivered to 500 pc. 

Cat. # coulor Price [USD]/500 

CV-VL-W white 15.40 

CV-VL-G yellow 15.40 

CV-VL-B blue 15.40 

CV-VL-GR green 15.40 

CV-VL-R ret 15.40 

CV-VL-V violet 15.40 

CV-VL-GA grey 15.40 

CV-VL-O orange 15.40 

CV-VL-P pink 15.40 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







X-Ray cassetts 

Kisker X-ray cassetts have a simple, but abolutly safe looking system and are high 

quality light tight instruments for the production of autoradiographs in molecular biology. 

For exposure at deep temperature up to - 70°C the cassetts are extra rivetet, which 

guarantee absolutly stability. 

Kisker X-ray cassetts feature: 

* extremly low radiation absorption 

* highest quality through exact film/screen contact 

* long lasting antistatic 

* extremly long shelflife through plastic covered aluminium 

* extra reveted with additional garant stability up to -70°C 

Also we manufacture special custom sizes on request. Please ask for quotation. 

Cat.# Size in cm Price [USD] 

ZV0002 13 x 18 120.62 

ZV0003 15 x 30 131.56 

ZV0004 15 x 40 182.04 

ZV0005 18 x 24 137.28 

ZV0006 18 x 43 182.04 

ZV0025 20 x 25 167.45 

ZV0007 20 x 40 182.04 

ZV0008 20 x 60 328.26 

ZV0009 20 x 80 401.40 

ZV0010 20 x 96 584.16 

ZV0012 24 x 30 168.17 

ZV0014 30 x 40 190.12 

ZV0015 30 x 60 423.28 

ZV0016 30 x 80 595.88 

ZV0017 30 x 90 643.36 

ZV0019 35 x 35 208.35 

ZV0020 35 x 43 218.65 

ZV0022 40 x 40 225.94 

Intensifying Screens 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 

We offer two lines of high quality intensifying screens. The intensifying screens increase the sensitivity of the X-ray films. 

*Typ Universal - sensitivity 100, Calcium-Tungstate, blue emitting, no static loading,low intensification, very good solution. 

*Typ Extrarapid - sensitivity 200, Calcium-Wolframat, blue emitting, high intesification, very good resulotion, free election of 

standard films, replacing the formerly available "Cronex lightning plus", our most popular CaWO4 screen 

ALL INTENSIFYING SCREENS ARE SOLD AS PAIR, PRICES ARE / PAIR! 

Size Cat.#.Universal. Price [USD] Cat. # Extrarap Price [USD] 

13 x 18 212002 45.60 E1318 45.60 

15 x 30 212003 59.90 E1530 59.90 

15 x 40 212004 82.40 E1540 82.40 

18 x 24 212005 62.90 E1824 62.90 

18 x 43 212006 104.90 E1843 104.90 

20 x 25 90.40 E 2025 90.40 

20 x 40 212007 125.60 E2040 125.60 

20 x 60 212008 221.00 E2060 221.00 

24 x 30 212012 99.50 E2430 99.50 

30 x 40 212014 158.00 E3040 158.00 

35 x 35 212018 174.40 E3535 174.40 

35 x 43 212019 169.90 E3543 169.90

40 x 40 212021 226.40 E4040 226.40 

Cleaner for Intensifying screen 

To keep intensifying screens antistatic, the screens should be cleaned every 6 weeks. 


201001 Cleaning solution 250 ml 21.24 

201002 Cl. Sol. with sprayer 250 ml 28.53 

Film hangers 

Our film hangers are made from stainless, polished steel and are available in useful sizes. The patented 

closers in the corners are constructed, to avoid in any way damaging of the film, when placing into the 

frame, while the film is fixed strongly and dryes completly up to the corner. All film hangers are supplied 

with a 46cm long holder bar. 

Cat. # Size Price [USD] 

FR1318 13 x 18 cm 40.18 

FR1530 15 x 30 cm 40.18 

FR1540 15 x 40 cm 40.18 

FR1824 18 x 24 cm 40.18 

FR1843 18 x 43 cm 57.77 

FR2025 20 x 25 cm 57.77 

FR2040 20 x 40 cm 43.19 

FR3040 30 x 40 cm 43.19 

FR3535 35 x 35 cm 43.19 

FR3543 35 x 43 cm 43.19 

FR4040 40 x 40 cm 43.19 

Fuji X-ray films RX 

Fuji X-ray films for autoradiography are of highest quality and useful for all types of experiments. 

Proteines and DNA`s may be marked with all types of radioisotopes. The Fuji RX film is a on both 

sides covered X-ray film with high contrast for all autoradiography experiments. He is of high 

sensitivity for exposure with all UV/blue emitting Calcium-Wolframat- or rare earth intensifying 

screens. The films are supplied in packs of 100 sheets. 

Cat. # size in cm Price [USD] 

RX1318 13 x 18 52.77 

RX1824 18 x 24 91.31 

RX2430 24 x 30 149.79 

RX2040 20 x 40 164.38 

RX3040 30 x 40 242.81 

RX3535 35 x 35 266.62 

RX3543 35 x 43 320.61 

X-Ray viewing boxes 

Cat. # Material size power Price [USD] 

A005 metal 24 x 30 4 x 8 Watt 428.86 

A007 metal 36 x 43 2 x 15 Watt 428.86 

A008 metal 72 x 43 4 x 15 Watt 536.25 

A009 metal 108x43 6 x 15 Watt 664.95 

X-Ray film developer 

A practical and robust developer made of PVC, offering an economical alternative to 

expensive routine units. It is suitable for the development of autoradiography in the 

research sector and is available in two formats, up to 24 x 30 cm and 35 x 43 cm. 

Cat. # Description / parts included Description / parts included 

TK2430 for 24x30cm: 2 x 7 L tanks with lid 

1 x 8,5 L tank with lid

Top of Page 


1 set-on-try 

A010 for 24x30cm: 7 L tank with lid 


1 x 30 L tank w/ o.lid 

1 tank with drain 

A011 Hose connection set for TK3543 

A012 Sub frame for 3 Tanks 

A013 tank 20 Litre w/o lid 


A014 PVC stirring rod, 60 cm lang 

A016 thermometer, steel 10-40°C 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







DNA-Workstation I 

The DNA-Workstation is an UV sterilisation cabinett to decontaminate reagents and 

equipment prior to carrying out PCR reactions. The powerful 15 watt UV light (254 nm) of 

the DNA-Workstation denatures nucleic acids in 5-30 minutes making them unsuitable for 

amplification and therefore eliminating any possible cross contamination. The DNA- 

Workstations are equipped with a white lamp for illumination. The 10 mm acrylic walls or 8 

- 10 mm glass walls also acts as an efficient shield of beta-radioactive emissions. The 

DNA-Workstations stand on an easy to clean stainless steel tray. 

Available models: 

L020C: acryl side walls, 1 x 15 watt UV-lamp (254 nm), 1 x 15 watt white light lamp and 1 

x UV/Air cleaner (254 nm), which circulates the air along the UV-lamp for continues 

denaturation, lower part front to turn up. 

Dimensions: 69 x 51 x 57 cm (WxDxH) 

Weight: 25 kg 

L020-G: glass sides, which are resistant to UV-cracking and can be cleaned with the 

medium of choice, 2 x 15 watt UV-lamps (254 nm), 1 x 15 watt white light, lower part 

front to turn up 

L020-GC: glass sides, which are resistant to UV-cracking and can be cleaned with the 

medium of choice, equipped with 1 x 15 watt UV-lamp (254 nm), 1x 15 watt white light 

lamp and 1 x UV/Air cleaner (254 nm). 

Dimensions: 69 x 51 x 57 cm (WxDxH) 

Weight: 35 kg 

Cat. # Description Power Price [USD] 

L020-C DNA-Workstation, Acryl with UV/Air-Cleaner 220Volt/50Hz 2,340.40 

L020-GC DNA-Workstation, Glass with UV/Air Cleaner 220Volt/50Hz 2,690.70 

DNA-Workstation I-XL 

This XL-version of the workstation shows the same advantages like DNA-workstation I. 

In comparison with the standardversion the XL-version provides a working area of 120 x 

52 cm. 

L020-XL-GC: 

The base of the front-screen can be locked in 3 positions 

2 x 30 watt UV-lamp (254 nm) 

1 x 30 watt whitelight lamp 

1 x 30 watt UV/Air-Cleaner (254 nm) 

Dimensions: 124,5 x 58 x 58,5 cm (BxTxH) 

Weight: 58 kg 


L020-XL-GC DNA-Workstation, Glass with UV/Air Cleaner 220Volt/50Hz 3,654.10 

Print version 

UV-Cleaner, the new combination of Laminar Flow and UV-light for Clean Rooms 

This UV-Cleaner provides DNA-fragment-free laboratories without direct UV-light. The air is constantly 

flowing through the instrument, which is equipped with a fan, an UV-lamp and a dust filter. Inside the box the 

density of the UV-light is increased 1000 fold, sufficient to inactivate DNA complete. Also microbiological 

contaminations are reduced strongly. 

The UV-Laminar-Flow is able to clean 25 m3 of air/ hour to provide DNA free laboratory of 25 m3 within 3 

hours. 

Further advantages: 

no HEPA-filters to change 

ozon-free high density UV decontamination 

noise free, low energy consumption 

long living UV-lamps (8.000 hr) 

compact for wall fixation 

The instrument is recommended for clean room laboratories as PCR, DNA-Analysis, Microbiology, Virology, 

Tissue Culture or other rooms, where a contamination free area is needed. After 12 hours of air cleaning, the 

UV-Laminar Flow provides an estimated reduction of the colony forming unit to 80 - 100 CFU/m3 air 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

L046-M 

weight: 3,7 kg 

power 220/240 volt, 50/60Hz, 30 watt. 

Cat. # Description Capacity/hr Price [USD] 

L046-M UV-Cleaner 25m3 485.00 

DNA-Workstation II 

This DNA-Workstation avoids cross-contamination by suction of the air and 

ducting it through an activated charcoal filter. All particles are captured and 

will not reach normal lab air. 

The DNA-Workstation is equipped with an UV-lamp (254 nm) and 

filtercassette. The hour-counter shows the overall working time. The 

activated charcoal filter should be replaced every 1000 working hours. The 

work surface is made from stainless steal and easy to clean. The airflow is 

adjustable from 0 - 100%. The DNA-Workstation is available in 3 versions. 

The perspex cover can be moved 100mm backwards (exept USA version). 

Specification: electr. power: 220volt/50Hz/80watt 

Dimensions of working space: 470 x 300mm (W x D) 

suction space: 410 x 240mm (W x D) 

Exterior dimensions Standard-version: 485 x 540 x 250mm (W x D x H) 

Sydney-version: 485 x 540 x 465mm (W x D x H) 

USA-version : 485 x 540 x 600mm (W x D x H) 


L016 DNA-Workstation (Standard) 3,093.00 

L016-SY DNA-Workstation (Sydney) 3,093.00 

L016-US DNA-Workstation (USA) 3,750.00 

L016-AF act.charcoal filter 98.00 

L016- UV UV-lamp 98.00 

BIO-LINK-Crosslinker 

BIO-LINK 254 nm provides a fast and reliable method, to fix DNA or RNA onto nylon- or 

nitrocellulose membranes. The crosslinking requires only a few seconds for a stable 

fixation between DNA/RNA and the membran. This method avoids a loss of samples 

through later hybridisation. The signal intensity is manifold increased (5 - 10 times) 

compared to the traditional and time consuming baking method (two hours at 80°C ). The 

BIO-LINK is equipped with five tubes of 8 Watt and also available in 312 nm and 365 nm. 

The big volume chamber (14,5 x 33,0 x 26 cm / HxDxW) offers space for bigger tubes and 

plates. 

UV-energy supply can be set precise. BIO-LINK is equipped with an UV-energy 

programming system with a time integrator, which constantly monitors the UV-light 

emission. 

Further technical details: 

9 presetted energy-/time programs or manual configuration 

max. UV-exposition in two ranges:0 - 9,999 joules and 0-99,99 joules 

high reproducability by UV-sensors 

large, user friendly keybord with LED-display 

internal safety interlock 

timer up to 999,9 minutes 

Dimensions: 30,5 x 36 x 35 cm (HxDxW), weight: 10,5 kg 

In addition to the crosslinking of nucleic acids BIO-LINK can be used for: 

"Nicking" of DNA in agarose-geles 

partial restriction endonuclease digestion by formation of thymine dimers 

Rec-A mutation-screening 

elimination of PCR-contamination 


BLX-254 BIO-LINK 254 nm 1,790.70 

BLX-312 BIO-LINK 312 nm 1,790.70 

BLX-365 BIO-LINK 365 nm 1,790.70 

Nitrocellulose-Membrane 

Membrane of 100% pure nitrocellulose for transfer of proteins and nucleic acids. It shows 

high binding capacity (80 - 100 µg / cm2) and a low background. Pore size 0,45 µm is used 

for standard applications. The 0,2 µm pore size is recommended for transfer of low 

molecular weight proteins (< 20 kDa) and nucleic acids to avoid loss of sample during 

transfer.

Cat. # Description Size Packsize Price [USD] 

MNC-0.2 Nitrocellulose-Membran 0,2µ 33 x 300 cm 1 Roll 219.00 


Incubator and Hybridisation ofen 

The incubator is a compact bench-top unit, which is available in different configurationes. 

It can be supplied as incubationofen with and without rotissery or rockingplatform. A large 

usable space and a big LED Display garant easy setting and reading of the 

microprocessor controled temperature and speed. A key switch is used to select rotissery 

or shaking mode at the combination version L018-HY-RK. 

Specificationes: 

temperature range RT - 80°C, temerature accuracy 0,2°C 

speed rotissery 1 - 100 rpm 

speed rocking platform 1-100 rpm 

speed orbital shakingplatform 1-200 rpm 

speed Vortexer 1-1.500 rpm 

dimensions of platformen 200 x 270 mm 

inner dimensions 340 x 260 x 250 mm, overall dimensions 360 x 440 x 430 mm, weight 

25,0 kg 


L018 Incubator 1,382.80 

L018-RK Incubator with rocker-platform 1,861.20 

L018-OS Incubator with Orbital-platform 1,861.20 

L018-VS Incubator with Vortex für micro/deep well plates 2,135.30 

L018-HY Hybridisation ofen with 1 rotissery selected from below 1,861.20 

L018-HY-RK Hybridisation ofen with rotissery and rockingplatform 2,135.30 

L018-8R rotissery for 8 tubes of 35 mm diameter 319.60 

L018-16R rotissery for 16 x 50 ml tubes, conical 319.60 

L018-24R rotissery for 24 x 15 ml tubes, conical 319.60 

Digi-Image, Geldocumentation-System 

Digi-Image Geldocumentation-System is a compact "Low-Budget"-System, which works without the need 

of a space consuming PC in the laboratory. The digital 8 megapixel camera offers excellent resolution. 

Pictures are viewed direct through a 8" TFT colour monitor. If necessary, pictures can be stored on a 

memory card (1 GB included with multicard-reader) to transfer data to a PC for further analysis. If 

purchased with the corresponding UV-Transilluminator (cat.# DG-UV-20M) the safety switch turn off the 

transilluminator when the door is opened. Also the internal light is activated for convenient gel 

manipulation. A thermoprinter is also available. 

Digi-Imagesystem: 

Specifications dark hood 

Dimensions: 29 x 22 x 32 cm (B x T x H) 

8"TFT-colour monitor (resolution: 640 x 480 pixel) 

Multi power source for camera, whitelight and monitor 

video- u.audio-input 

Specifications camera: 

8-megapixel 

resolution: 640 x 480 to 3.264 x 2.448 pixel 

8-fold optical zoom 8,9 - 71,2 mm 

Autofocus: TTL (Contract-detect through-the-lens) 

Digi-Imagesystem also available with UV-transilluminator (DG-S_UV)

Top of Page 


Specifications UV-transilluminator (312 nm): 

filter: 20 x 20 cm (EtBr), High/Low-intensity-switch 

UV-protection shield: 330 x 250 mm 

overall dimensions: 340 x 295 x 100 mm, weight: 7,5 kg 

Cat.# Description Price [USD] 

DG-S 

DG-S-UV 

DG-UV- 

20M 

Image-System inclusive 8-megapixel digital camera, 8" TFT colour monitor and camera hood ; 

EtBr-Filter 

Image-System inclusive 8-megapixel digital camera, 8" TFT colour monitor, camera hood, and 

UV-transilluminator (312 nm) 

3,375.00 

4,060.70 

UV-transilluminator (312 nm), 20 x 20 cm (EtBr), dual intensity with UV-protection shield 999.70 

DG-S/TP s/w Thermoprinter Mitsubishi, P93-E 2,230.00 

DG-EBF Filter (55 mm) -Ethidiumbromide for the camera 350.95 

DG-SYF Filter - SYBR® -Green for the camera 350.95 

DG-K61B Thermopaper Quality Standard, width: 110 mm, length: 21 m, VE = 4 rolls 71.36 

DG- 

K65HM 

Thermopaper Quality "High Density" width: 110 mm, length: 21 m, VE = 4 Rollen 142.86 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 








ECO-Power-Supply 

EEPS-250 is a very compact, lightweight and stackable power supply is useful for horizontal and 

vertikal gel electrophoresis applications. The economical priced unit offers technical features of 

more expensive power suppkies 

Specificationes:two pairs of outlets for running two electrophoresis units at same time 

250 Volt, 400 mA, 100 Watt 

constant voltage or constant current 

program storaage up to 10 methods 

timer 1 - 999 minutes with alarm setting at end of program 

safety: no load and leakeage detection 

microprocessor controlled 

dimensions 160 x 140 x 70 mm (w x d x h), weight 2 Kg 

new: EEPS-2A: useful for all blotting techniques or running of multiple SDS-gels 

three pairs of outlets, programmable up to 16 Programs, size 180x280x140, 3 kg 

Cat. #: Voltage V Current mA Power W Price [USD] 

EEPS-250 250 400 100 432.50 

EEPS-2A 200 2000 200 1,090.00 

Power Supplies Series 800 

Power Supplies of Series100 and 800 are repaced by EV series, the more powerful, 

prgrammabable units for all application areas according to their specification. They are produced 

with all safetey-standards as a selftest bei switching on and garant a fast and easy handling. Up to 

four electrophoresis units can be used at same time. The user is fully protected against overload 

and short circuits, when voltage/current is available again, the experiments continous according to 

the preseted parameters. All units with exeption of modell E844 are equipped with a volt-hourintegrator 


outlets for four Electrophoresis units 

up to 9 different programms with 9 different steps 

large LED-Displays for easy reading 

all models can run with constant voltage, current or power, automatic cross-over 

protection against overload and short circuit 

Dimensions: 30 x 18 x 12 cm (BxTxH) , Weight E835/831/844/863/865/ 5 kg, E832 6 kg, 

E802/861/815/833/862 10 kg 

Cat. #: Voltage V Current mA Power W Price [USD] 

EV243 400 250 50 656.37 

EV231 300 1000 150 879.45 

EV202 300 2000 300 1,208.35 

EV265 600 500 150 1,071.07 

EV261 600 1000 300 1,251.25 

EV215 1200 500 300 1,308.45 

EV232 3000 150 150 1,351.35 

EV233 3000 300 300 1,794.65 

EV262 6000 150 300 2,130.70 

Application 

Technique 

Sequencing Horizontal/Vertikal 

Gels 

I E 

F 

Electro- 

Elution 

EV231 no yes no yes no 

EV202 no yes no yes yes 





Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Semi-Dry a. Western 

Blotting 

Print version

EV215 yes yes yes yes no 



EV262 yes no yes no no 

Horizontal Gelsystems 

MultiSUB mini: Gel size 7 x 7 cm qnd 7 x 10 cm (B x L) 

The multiSubmini is the smallest unit in the range and designed for fast separation of low number 

samples in agarose gel. The small gel size maximises run economy but does not compromise 

versatility as two tray options are available: Tray 7 x 7 cm or 7 x 10 cm. Casting dams allow gelsto be 

rapidly cast externally while the multiSub unit is in use for gel running. 

Specificationes: colour coded combs 0,75 - 1,0 - 1,5 - 2,0 mm 

3 / 4 comb positiones for max. 32 or 64 samples 

low buffervolume: 225 ml 

injection moulded construction - durable, leakproof environment for complete safety and long life 

simple gel casting by using dams 

complete unit includes: MultiSUBmini-unit with platin electrodes, UV-Tray, two combs (8 teeth – 1 mm), dams, loading guides 

and rubber feet 

recommended power supplies: 

EV243 400V/300mA, EPS-304 300V/400mA 

Cat. # Description sample volumen Price [USD] 

E-MSM-7 MultiSUBmini mit 7x 7 cm Tray 350.35 

E-MSM-10 MultiSUBmini mit 7x 10 cm Tray 356.07 

E-MSM-Duo MultiSUBmini mit 7 x 7/7x 10 cm Tray 384.67 

E-MSM7-UV7 UV-transparent Tray 7 x 7 cm 64.35 


E-MSM7-UVDAM dams (2) 64.35 

E-MSM7-UVLG Loading Guides (2) 21.45 

E-MSM7-UVS gel scoop 35.75 

E-MSM7-1-1 Prepcomb 1,0 mm - 1 Marker 203 µl 35.75 



E-MSM7-8-1 comb 1,0 mm - 8 teeth 25 µl 35.75 


E-MSM7-12MC-1 comb 1,0 mm - 12 teeth f.Multipipette 14 µl 35.75 


For orders of combs in thickness of 0, 75 mm – 1,5 mm – 2,0 mm replace "1" at end 

of cat.# with corresponding number. 

MultiSUB choice: Gel size 15 x 7 cm, 15 x 10 cm and 15 x 15 cm (B x L) 

This unit is ideal for restriction fragment analysis, sample prep or checking of high number of 

samples. The multiSUB choice offers a wide degree of versatility. Three tray options are 

available 15 x 7 cm, 15 x 10 cm oder 15 x 15 cm. Gel casting is easy by using casting dams. 


3, 4 or 6 comb positiones for maximum 210 samples 

low buffer volume: 500 ml 

injection moulded construction - durable, leakproof environment for complete safety and long life 

simple gel casting by using dams 

complete unit includes: MultiSUB choice with platine electrodes, UV-tray, two combs (20 teeth – 

1 mm), dams, loading guides and rubber feet 


EV243 400V/300mA, EV265 600V/500mA, EPS-304 300V/400mA 


Sample 

volume 

Price 

[USD] 

E-MSCHOICE-7 MultiSUB choice with 15x 7 cm Tray 427.57 



E-MSCHOICE-Trio MultiSUB choice with 3 Trays 520.52 

E-MSM15-UV7 UV-transparent Tray 15 x 7 cm 70.07




E-MSM15-UVLG loading guides (2) 21.45 


E-MSM15-1-1 prepcomb 1,0 mm - 1 marker 495 µl 41.47 







E-MSM15-10mC-1 comb 1,0 mm - 10 teeth f. Multipipette 29 µl 45.76 







of cat.# with corresponding number. 

MultiSUB maxi: Gel size 20 x 20 cm and 20 x 10 cm (B x L) 

MultiSUB maxi is primalary designed for separation of high numbers of samples from 

PCR and cloning. It allows ultra high-resolution separations over extended runs. Two 

trays are available, 20 x 20 cm and 20 x 10 cm. Tray sizes correspond to standard 

blotter sizes allowing easy sample transfer onto a membrane for further analysis. . 


3, 5 or 9 comb positiones for maximum 450 samples 

buffer volume: 1200 ml 

injection moulded construction - durable, leakproof environment for complete safety and 

long life 

Gel casting is easy by using casting dams 

complete unit includes: MultiSUB max with platine electrodes, UV-tray, two combs (20 

teeth – 1 mm), dams, Loading Guides and rubber feet 


EV231 300V/1000mA, EV265 600V/500mA, EPS-304 300V/400mA 

Cat. # Description Sample volumen Price [USD] 

E-MSMAXI-20 MultiSUB maxi with 20 x 20 cm Tray 713.57 

E-MSMAXI-10 MultiSUB maxi with 20x 10 cm Tray 713.57 

E-MSMAXI-Duo MultiSUB maxi with 20x20 and 20 x 10 cm Trays 799.37 











E-MSM20-20MC-1 comb 1,0 mm - 20 teeth f. Multipipette 27 µl 50.05 




E-MSM20-28MC-1 comb 1,0 mm - 40 teeth f. Multipipette 11 µl 50.05 



of cat.# with corresponding number.

MultiSUB Screen: Gel size 26 x 16 cm, 26 x 24 cm and 26 x 32 cm (B x L) 

MultiSUC Screen is designed for rapid screening of very large numbers of Clonal or 

PCR samples. It can be used flexible with different trays 26 x 16 cm, 26 x 24 cm or 26 

x 32 cm. This allows loading and analysis of 672 samples or exactly seven 96 well 

microplates. The large gel run lenght of 32 cm also allows resolution of samples over a 

long distance for separation of comples sample bands such as in restriction fragment 

analysis. 


maximum 672 samples 

buffer volume: 1400 ml 

buffer recirculation ports included 

injection moulded construction - durable, leakproof environment for complete safety 

and long life 

complete unit includes: MultiSUB Screen with platine electrodes, UV-Tray, six combs 

(28 teeth – 1 mm), loading guides and rubber feet 


EV231 300V/1000mA, EV265 600V/500mA, EPS-304 300V/400mA, EPS 305 

300V/500mA 

Cat. # Description Sample volume Price [USD] 

E-MSSCREEN-16 MultiSUB screen with 26 x 16 cm Tray 999.57 

E-MSSCREEN-24 MultiSUB screen with 26x 24 cm Tray 999.57 

E-MSSCREEN-32 MultiSUB screen with 26x 32 cm Tray 999.57 

E-MSSCREEN-Trio MultiSUB screen with 26x16 und 26x24 and 26 x 32 cm Trays 1,272.70 

E-MSM26-UV16 UV-transparent tray 26 x 16 cm 213.07 



E-MSM26-UVDAM dams 235.95 











Minigel: gel size 7 x 8,3 cm (W x L) 

A small tank for fast separation of nucleic acids and DNA fragments in agarose gels; 

maximum sample quantity 24 

Buffer volume 300 ml, gel volume 30ml (0,5 cm gel thickness) 

Separation lenght with one Comb: 7 cm, two combs: 3,5 cm 

Gel casting direct in the tank or in gel casting system 

UV-transparent gel tray 7 x 8,3 cm with seals 

Unit dimension: 15,5 x 18 x 8,5 cm (B x L x H) 

Complete unit includes: Minigel-Tank with platin electrodes, UV-tray with seals, 2 combs 1 mm - 8 

and 12 teeth, levelling bubble, rubber feet 

Cat. # Description Sample size, 4mm well Price [USD] 

EHO-1 Minigel, complete unit 398.97 

EHO-1-6 Comb 1,0 mm - 6 teeth 37µl 45.76 








EHO-1-UVT UV-tranparent tray 7 x 8,3 cm 112.97 

EHO-1-GS-D 2 silicone seals for UV-tray 20.02 

EHO-1-GS Casting system for 3 Minigels 127.27

EHO-NP levelling platform 141.57 

EHO-L levelling bubble 17.16 

Midigel: gel size 12 x 14 cm (W x L) 

Tank for analytic and preparative experiments, PCR-screening and RFLP 



Separation lenght with one comb: 12,6 cm, two combs: 6,3 cm 


UV-transparent gel tray 14 x 12 cm with seals 

Unit dimension: 21,5 x 26 x 9 cm (B x L x H) 

Complete unit includes: Midigel-Tank with platin electrodes, UV-tray with seals, 2 combs 1 mm 12 

and 20 teeth, levelling bubble, rubber feet. 

Cat. # Description Sample size, 4mm well Price [USD] 

EHO-2 Midigel, complete unit 527.67 

















EHO-2-UVT UV-transparent tray 12 x 14 cm 127.27 

EHO-2-GS-D 2 silicon seals for tray 20.02 

EHO-2-GS Casting system for 2 Midigels 127.27 

Minigel View: gel size 10,2 x 8,3 cm (W x L) 

Tank with UV-light transparent bottom, very useful for isolation of DNA-fragments from Lowmelting-agaroses. 

This tank can be placed during the run on a transilluminator, to view the 

progress of the separation 

the tank is produced from one block, no leakage evermore. 




Gel casting direct in the tank 

Unit dimension: 16 x 15 x 5,2 cm (B x L x H) 

Complete unit includes: Minigel-Tank with platin electrodes, 2 combs 1mm - 8 and 12 teeth, 

levelling bubble, rubber feet. 

Cat. # Description sample size, 4mm well Price [USD] 

EHO-6 Minigel "View", complete unit 427.57 












EHO-65-16 Comb 1,5 mm - 16 teeth 24µl 41.47

EHO-NP levelling platform 141.57 

EHO-L levelling bubble 17.16 

omniPAGE mini-System: for 1 bis 4 Gels, Gel size 7,5 x 8 cm 

OmniPage mini is the preferred unit for mini SDS Page-, gradient and second dimension 

electrophoresis. OmniPAGE mini is constructed using the latest injection molding 

manufacturing techniques.This gives a high quality low cost product with unsurpassed finish 

durability and strength. The unit incorporates a sealing system which is compatibel with most 

8 x 10 cm and 10 x 10 cm precast gels. Gel casting and runningutilise the same insert, no 

transfer of glas plates during the gel casting is necessary. The insert contains just one scew 

per clamping bar side allowing very rapid set up of both hand cast and precast gels. Ultra 

soft silicone seals and pressure bars which surround the glass plates guarantee leak proof 

gel casting. 2 mm thick glass plates prevent breakage and have bonded spacers for 

convenience. Electroblotting and tube gel modules are available which use the same outer 

tank and lid. 

2-D and electroblotting-module optional 

compatibel with 8 x 10 cm and 10 x 10 cm precast gels 

colour coded combs 0,75 - 1,0 - 1,5 - 2,0 mm 

low buffer volume, 250 ml up to maximum 1200 ml 

easy gel casting with casting base 

up to four gels for maximum 80 samples (20 samples/gel) 

VS10D includes: omniPage mini chamber with platine electrodes, two sets of glas plates with 

bonded 1 mm spacer, two combs 12 Zähne - 1mm, dummy plate, cooling pack. 


E-VS10-D omniPAGE mini 

without casting 

base 

Price 

[USD] 

664.95 

E-VS10-SYS omniPAGE mini-System with casting base 779.35 

E-VS10DCAST casting base 184.47 

E-VS10DCASTM replacement silicone mat for casting base 47.19 

E-VS10NG notched glass plates 

E-VS10PG glass plates standard 

E-VS10PGS1 glass plates standard, 1 mm 

E-VS10NGS1 notched glass plates 1 mm 

2 plates 10x10 

cm 

2 plates 10x10 

cm 

with bonded 

spacer 

with bonded 

spacer 

E-VS10-75 spacers (2) 0,75 mm 28.31 

E-VS10-1 spacers (2) 1,0 mm 28.31 

E-VS10-15 spacers (2) 1,5 mm 28.31 

E-VS10-2 spacers (2) 2,0 mm 28.31 

E-VS10-1-0.75 prep-comb 0,75 mm – 1 marker 500 µl 40.04 

E-VS10-5-0.75 comb, 0,75 mm – 5 teeth 70 µl 40.04 

E-VS10-8 mC-0.75 comb, 0,75 mm – 8 teeth 40 µl 40.04 




E-VS10-16-mC-0.75 comb 0,75 mm – 16 teeth 20 µl 40.04 

E-VS10-20 mC-0.75 comb 0,75 mm – 20 teeth 15 µl 40.04 

E-VS10-1-1 prep-comb 1 mm – 1 marker 650 µl 40.04 

E-VS10-5-1 comb, 1 mm – 5 teeth 100 µl 40.04 

E-VS10-8 mC-1 comb, 1 mm – 8 teeth 60 µl 40.04 




E-VS10-16-mC-1 comb, 1 mm – 16 teeth 25 µl 40.04 


E-VS10-1-1,5 prep-comb 1,5 mm – 1 marker 1000 µl 40.04 

E-VS10-5-1,5 comb, 1,5 mm – 5 teeth 140 µl 40.04 

E-VS10-8 mC-1,5 comb, 1,5 mm – 8 teeth 80 µl 40.04 

64.35 

34.32 

51.48 

51.48




E-VS10-16-mC-1,5 comb 1,5 mm – 16 teeth 40 µl 40.04 

E-VS10-20 mC-1,5 comb 1,5 mm – 20 teeth 30 µl 40.04 

E-VS10-1-2 prep-comb 2 mm – 1 marker 1300 µl 40.04 






E-VS10-16-mC-2 comb, 2 mm – 16 teeth 50 µl 40.04 


omniPAGE mini-System: Module for 2 – D Electrophoresis and Electroblotting (10 x 

10 cm) 

OmniPAGE mini vertical-electrophoresis systems can be used for different techniques in the 

same basic unit (lid and buffer chamber). The exchangable modules offer most possible 

flexibility for plate-, 2-D-electrophoresis and electroblotting. 

OmniPAGE-System is also avaialble in Maxi-Format of 20 x 20 cm. Informatione on tequest. 

Mini 2-D-Modul 


E-VS10-DCI omniPAGE mini tube-gel Modul witt tubes/blanking ports 386.10 

E-VSMCT10 omniPAGE mini capillary tubes 10 tubes 55.77 

E-VSMCBP omniPage mini blanking ports 10 ports 27.17 

Mini Electroblotting-Modul 


E-VS10-BL omniPAGE mini blotting-modul with 3 cassettes and 6 Pads 386.10 

E-VS10C omniPAGE mini cassette 1 cassette 55.77 

E-VS10F omniPage mini pads 6 pads 27.17 

Tank-Electroblotter for Mini (10x10 cm)- or Maxi (20 x 20 cm)-Gels 

The tankblotter are designed primarily for wet electroblotting of proteins. They offer a 

combination of increased capacity with economy saving features. Both units have increased 

capacity over standard systems with up to five gel blot cassettes utilised at any one time. A 

uniform electrical field is provided by a high intensity coiled electrode and ensures uniform 

transfer across the blot surface. The cassetes open architecture ensures the maximum blot 

area. The hinged lid design offer added convenience and easy sample preparation. The units 

are compatible with magnetic stirrers to aid heat dispersal and prevent pH drifts in the buffer 

due to uncomplete buffer mixing. Each system includes a cooling pack to further enhance 

transfer efficiency by removing excess heat. 

Capacity 5 cassettes 

uniform transfer area, magnetic stirrer compatibel 

dimensions E-FBM-10: 19 x 13 x 19 cm, buffer volume 1000 up to 1500 ml 

dimension E-FBM-20: 24 x 16 x 26 cm, buffer volumen 4300 up to 6000 ml.

Top of Page 



E-EBM10 Mini-Blotter with 5 cassettes, 12 Pads, cooling pack 770.77 

E-SB10C Mini-cassette 1 cassette 55.77 

E-SB10F Fiber-Pads 6 pads 41.47 

E-EBM20 Maxi-Blotter with 5 cassettes, 12 pads, cooling pack 942.37 

E-SB20C Maxi-cassette 1 cassette 84.37 

E-SB20F Fiber-Pads 6 pads 84.37 

"Semi-Dry"-Blotter 10 x 10 cm and 20 x 20 cm 

These "Semi-Dry"-Blotter offer rapid transfer times for DNA, RNA and Proteine, typically 

15 to 30 minutes. Both units can be used for all blotting-types: western, southern and 

northern via uncomplicated buffer and set up procedures. Gel thickness from 0,25 to 10 

mm are compatible without the need for additional equipment. Both units are compatible 

with their respective omniPAGE systems. 

"Semi-Dry" blotting use only very low buffer volumes, typically only a few milliliter. The 

screw down lid can be removed complete. The screws secure the blot sandwich and 

allows complete control of preasure ensuring even transfer. The electrodes comprising 

platinum coated anode and stainless steel cathode, will exhibit practically no corrosion and 

so provide many years of trouble free use. 

features: rapid transfer times, western-, southern- und northern-blots in less than 30 

minutes 

low tansfercosts through low buffer volumens (MiniBlotter 5 ml, MaxiBlotter 20 ml) 

screw system ensures evens preasure and heat distribution 

takes gel sizes from 0,25 to 10 mm without accessories 

corrosion fee platin anode and stainless steel cathode 

Cat. # Descrition pack unit Price [USD] 

E-SDB-10 MiniBlotter 1 707.85 

E-SDB-20 MaxiBlotter 1 1,122.55 


Membrane of 100% pure nitrocellulose for transfer of proteins and nucleic acids. It shows 

high binding capacity (80 - 100 µg / cm2) and a low background. Pore size 0,45 µm is used 

for standard applications. The 0,2 µm pore size is recommended for transfer of low 

molecular weight proteins (< 20 kDa) and nucleic acids to avoid loss of sample during 

transfer. 

Cat. # Description Packsize Price [USD] 



Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Dry Block Heat Bath 

This economical microprocessor controlled dry block heat bath can run either two tube-blocks 

or one microtiter block. The digital LCD readout monitors the temperature in REAL-TIME and 

displays the target temperature. The heating range goes from 5 °C over room- temperature to 

150°C at a temperature stability of +/- 0,2°C. The microprocessor controled unit has a RS232port 

and a timer from 1 to 9999 minutes 

A number of different blocks and the possibility to offer custom made blocks garant maximum 

flexibility. 

The instrument is compact 26 x 20 x 8,5 cm(TxBxH) and needs only the space of a DIN A4 

page. The weight is 2,9 kg without blocks. 

Cat. # description form Price [USD] 

L001-I Dry block heat bath for two blocks 595.50 

L001-III Dry block heat bath for one block 365.50 

L001-20/30 20x1,5/30x0,5 ml Combiblock, double sided 220.00 

L001-24P 24 x 1,5/2,0 ml Block parallel 175.70 

L001-24K 24 x 1,5 ml Block conical 175.70 

L001-64K 64 x 0,2 ml Block conical 155.70 

L001-1215 12 x 15 ml Block 15ml tubes 155.70 

L001-0450 4 x 50 ml Block 50ml tubes 155.70 

L001-2010 20 x 10 mm Block 10 mm tubes 167.70 




Blocks for Microtiter plates only for use in L001-I 

Cat. # Description Form Price [USD] 

L001-96MTP 96 wells Microtest plate universal 260.50 

L001-96T 96 x 0,2 Tubes für Cycler 260.50 

Mini Dry Block Heat Combi 

This small dry block heat bath is a very economical alternative to standard block heat bathes. It is 

useful for longtime operation and fits all three common sizes of microtubes. The heating range 

goes from ambient to +100°C, the active and choosed target temperature is read at the LCDdisplay. 

The aluminium block -1 has capacity for 24 x 1,5 ml and 15 x 0,5 ml and 10 x 0,2 ml tubes. 

iIt takes 16 minutes only to get the maximum temperature of 100°C, the temperature stability is 

0,1°C at 37°C 

Specification:timer 96 hours 

dimension 210 x 230 x 110 mm, weight: 3.1 kg 

power: 220/240Volt/50/60Hz/200Watt 

Cat. # Description form Price [USD] 

L015/K Dry block heat bath incl. Block 53 places 795.00 

Mini Dry Block Heat bath II 

This small dry block heat bath is a very economical alternative to large-scale multi block heat 

bathes. The heating range goes from ambient to +100°C, the active and choosed target 

temperature is read at the LCD-display. The lid of the dry block heat bath may be closed to 

protect user from high temperated blocks and to increase temperature stability. 

The aluminium block -1 has capacity for 21 x 0,5 ml and 32 x 1,5 ml tubes. 

The aluminium block -2 has capacity for 50 x 0,2 ml tubes, 21 x 0,5 ml and 32 x 1,5 ml tubes. 

It takes 25 minutes to reach the maximum temperature of 100°C, the temperature stability is 

0,2°C. 

Specification: dimension 21 x 20 x 10cm, weight: 4kg 

power: 220Volt/50Hz/400Watt 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Cat. # Description form Price [USD] 

Print version

L019 / L019-1 Dry block heat bath incl. Block 53 places 870.75 

L019 / L019-2 Dry block heat bath incl. Block 103 Places 890.75 

Mini Dry Block Heat and Cool bath -10 to +100°C 

In most molecularbiology laboratories is it necessary to control temperature of the used enzymes 

and reagent-mixes. This compact and small dry block cool bath is a very economical alternative to 

ice buckets with the advantage to keep samples on a specific temperature. The instrument is 

working on the peltier principle with a temperature range from - 10°C to +100°C. 

The temperature settings are made by touch pad and shown by a digital display. 

Two modells are available: block for 20 x 0,5 ml and 12 x 1,5 ml tubes, total 32 places and block 

for 20 x 1,5 ml tubes. 

Specification: dimension 190 x 225 x 115 mm, weight: 4,1kg 


Cat. # Description blockversion Price [USD] 

L022-N-32 Dry block cool bath 20x0,5/12x1,5ml 1,399.95 

L022-N-20 Dry block cool bath 20x1,5ml 1,399.95 

Thermo - Shaker 

Thermo - Shaker is space saving, compact alternative for shaking and heating of 

microtubes at one time . 

Specification: 

Temperature, speed and time microprocessor controlled 

shaking speed: 250 - 1.400r.p.m., orbit 2mm 

heating range: 25°C to 100°C 

timer 1 minute to 96 hr 

2 exchangable blocks 

weight: 3,5kg, dimension 205x230x130mm, power extern:12Volt/4 Ampere 


L056 Thermo - Shaker 1,390.00 

L056-32 block for 20x0,5 ml and 12x1,5 ml Tubes 273.07 

L056-32-02 Block for 20x0,2 ml and 12x1,5 ml Tubes 273.07 

L056-20 block for 20x1,5 ml tubes 153.77 

L056-20-2.0 block for 20x2,0 ml tubes 273.07 

Thermomixer 4-99°C 

Mixing and incubation or cooling are essential steps of molecularbiological techniques. This unit is shaking 

your samples efficient with an orbit of 3mm and keeps temperature in a wide range from 4 to 99°C. The 

microprocessor controled electronic and high quality peltiers garant temperature accuracy and - constanty. 

Thermomixer is easy to use by 9 programms with 9 steps each. 4 easy interanchable blocks ensure for 

necessary flexibility during the daily work in the lab 

Specifications: 

temperature range: 4 - 99°C 

temperaturestability: +/- 0,5°C 

shaking speed: 300 - 1500r.p.m., to set in steps of 50 

heating speed: 5°C/min 

cooling speed: 4°C/min from 99 to 20°C; 1°C/min from 20 to 4°C 

all given data given for temperature range from 15 bis 35°C 

optional available with RS 232 interface 

weight: 5,9kg inclusive block, dimensions 190 x 190 x 325 mm, power 125 Watt , 230V/115V AC, 50/60Hz 


L057 Thermomixer 4-99°C 2,885.00 

L057-0,2 Block for 96 x 0,2 ml tubes 510.75 

L057-0.5 Block für 24 x 0,5 ml tubes 470.37 

L057-1.5 Block for 24 x 1,5 ml tubes 470.37 

L057-2.0 Block for 24 x 2,0 ml tubes 470.37 

Shaking-Incubator for Microtestplates or Microcentrifugetubes 

The Shaking Incubator allows you to heat and shake your samples simultaneously. A 

microprocessor controlled temperature/time-modul garantes an evan temerature stability. The 

temperature transfer by air recirculation heats your sample fast and independant from long warm 

up times. Choosed and real temperature are shown on the digital LCD-display, the clear acrylic lid 

allows a visual control. The unit is equipped with a security switch, which stopps the shaking

process when opening the lid. 

Spezification: 

temperature range: 37°C to 80°C 

temperature uniformity: +/- 0,3°C 

Speed: 250 – 1.250 r.p.m., amplitude: 3mm 

timer 0-9 Std, 59 min 

LED 

heatingpower: 300 Watt 

dimensions: 280 x 240 x 210mm, weight: 9,0 kg 


L051 Shaking-Incubator 2,265.57 

L051-1,5 Platform for 56 x 1,5/2,0ml Tubes 327.21 

L051-0,5 Platform for 192 x 0,5 ml Tubes 327.21 

L051-0.5 Adapter for 60 x 0,5ml Tubes 98.00 

L051-0.2 Adapter for 60 x 0,2ml Tubes 98.00 

L051-MTP Platform for 4 Microtiter plates 227.00 

Microprocessor controled Waterbath with magnetic Stirrer 

This compact waterbath are used in biological, medical and chemical research. The build 

in magnetic stirrer garants a constant constant water movement and therefor a better 

temperature stability. Temperature, time and stirring speed are displayed simultaneously 


temerature range 30°C bis 100°C 

temperature stability 0,1°C 

stainless steel tank with 4 liter capacity. 

LED display 

stirring speed 300 - 1000 rpm 

dimensions 340 x 170 x 200 mm 

dimensions of batharea 235x 135 x 110 mm 

weight 4,9 kg 

Cat.# Description Power Price [USD] 

L043 Waterbath/Magnetic Stirrer 1100 Volt, 50Hz 998.00 

Universal-Wasserbad mit Umwälzung 

waterbath with high temperature accuracy of 0,2°C. 


heating range RT to 100°C, 

LED display shows actual and set liquid temperature 

weight 8kg, outer dimensions 390 x 280 x 270mm, bath area 240 x 180 x 140 mm 

Cat.# description electrical requirement Price [USD] 

L041 Universal Waterbath 220Volt,50Hz, 1000W 1,135.85 

Incubator hoods 

This poratable inkubator hood can take laboratory equipment in coresponding size, when 

ever an external temperature area is necessary. Front- and upper side of the hood are 

made from transparent acryl to garant best view on your samples. The backside is made 

from black metal. 


temperature: RT to 65°C, temperature accuraccy: 0,2°C 

digital temperature- and time control 

air flow capacity: 260 m3/ hour., L090-L : 280 m3/ hour 

outside dimension: 500 x 510 x 525 mm (B x T x H) 

Cat.# usable chamber dimensions (WxDxH) electrical requirement Price [USD] 

L090-S 490 x 655 x 610 mm 220Volt,50Hz, 1000W 3,140.25 

L090-M 590 x 655 x 610 mm 220Volt,50Hz, 1000W 3,328.25 

L090-L 690 x 655 x 610 mm 220Volt,50Hz, 1000W 3,984.75

Top of Page 


Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Micro-Centrifuge, Vortex Mixer, "two in one" 

* 2,400 rpm at 700 x G 

*vortex speed also 2,400 rpm 

* weight 2.1 kg, dimensions 190 x 235 x 125 mm 

* The centrifuge - vortex mixer is supplied with 2 rotor-discs for 12 x 0,5 ml and 0,2 ml and 12 x 

1,5 ml tubes. 


MZ002 Centrifuge/Vortexmixer 115 VAC, US power cord 395.00 

MZ002-A-8x0,2 Rotor for 8er-strips 0,2 ml Tubes 35.75 

MZ002-18 18-Place-Rotor for 6 x 0,2/ 0,5/ 1,5 ml Tubes 35.75 

Multi-Fuge, 6,000 rpm: centrifuge or vortex, both in combination 

*centrifuge:1,000 - 6,000 rpm, to set in steps of 100 rpm 

*Vortex mode:soft - medium - hard 

*combine centrifuge-vortex mode 

*1- 99 minutes timer, 999 repeats 

*rotor discs inclusive for 12x1,5 ml and 12 x 0,5/ 12x 0,2 ml 


MZ009 Multifuge 115 VAC/12 VAV, 1A AC-adapter 669.00 

MZ009-A-8x0,2 Rotor for 8-Strips-0,2 ml tubes 0,2ml Tubes 35.75 

EBA 20 small centrifuge for 8 x 15 ml Tubes 

The practical and handy EBA 20 is the ideal centrifuge for low sample quantities. It is supplied with an 8place 

angle rotor and fitted with the E control panel. 

Rotor can be used with following tubes: 

8 x 15 ml (17 x 100 mm ) 

4 x 15 ml, Falcons with Screwcaps (17 x 120 mm ) 

8 x 9 - 10 ml Blood collection tubes ( 16,5 x 92 mm ) 

4 x 8 ml Bloodcollection tubes ( 16 x 125 mm ) 

8 x 8,5 - 100 ml Blood collection tubes (16x100 mm) 

technical specification: lid locking and holding device; display of real speed 

speed: 6.000 rpm, to set in steps of 100, 3.421 x g 

dimension/weight: 215 x 231 x 292 (HxWxD), 4 kg 

Print version 

Cat. # Power Price [USD] 

MZ007 110-127V, 50/60Hz 1,295.00 

Laboratory-Centrifuge for 15/50 ml Falcons and Microtest Plates 

MZ-014 is a modern benchtop laboratory medical centrifuge useful for 

sedimentation of cells, bacteria, yeast, formed blood elements. It provides 

operation with tubes and microtest plates. MZ014 is designed for safe work 

(metal protecting housing), easy maintenance and wide application range in 

medical, biochemical, industrial and other type laboratories 

specifications: 

variable speed 1000 - 3000 rpm 

Display LCD 

centrifugation time max. 1 to 30 minutes 

Dimensions 470 x 400 x 203 mm, weight ca 13,5kg 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

115 VAC with US-power cord 


MZ014 Laboratory-Centrifuge, 220 Volt, 50 Hz 1,750.70 

MZ014-MTP Rotor for 2 Microtestplates 207.35 

MZ014-17100 swing out rotor for 12 x 10 ml/17x100 mm 235.95 

MZ014-17120 swing out rotor for 12 x 15 ml/17x120 mm Falcons 386.10 

MZ014-29115 swing out rotor for 6 x 50 ml/29x115 mm Falcons 386.10 

"Smart Runner", Microlitercentrifuge for molecularbiology, powerful and low priced, 

14,000 rpm,15,558 x g 

This microlitercentrifuge is delivered complete with angel rotor inclusive lid for 12 - 18 or 24 x 

1,5/2,0 ml tubes. Smart Runner is going quickly to the maximum speed and fits on small space on 

the laboratory desc. 

The advantages: 

* lid locking and holding device 

* lid-open-button 

* emergency lid lock release 

* motor overheating protection 

* imbalance switch-off 

* settings of parameters by foil keyboard 

* speed increments 100 rpm, continous run, short run 

* timer 1 to 99 minutes 

* dimensions 198 x 231 x 292 mm (HxWxD), weight around 6,0 kg 

* 100 - 127 V, 50-60Hz 


MZ010 Smart Runner inclusive 12-fold Rotor 1,445.00 

MZ010-R18 Smart Runner inclusive 18-fold Rotor 1,499.00 

MZ010-R24 Smart Runner inclusive 24-fold Rotor 1,515.00 

MZ010-2024 Adapter for 0,2 ml PCR tubes 2.15 

MZ010-2023 Adapter for 0,5 ml tubes 2.15 

"Cool Sprinter" Microlitercentrifuge uncooled or cooled -10°C - 40°C, 14,000 rpm, 

18,626 x g 

Cool Sprinter is one of the fastest in his range. The maximum Speed is 14,000 rpm, RCF 

is 18,626 x g. With "Fast Cool" mode the centrifuge cooles in 10 to 15 minutes auf 4°C. 

Thermo sensitive samples can be centrifuged carefully because of this reliable cooling. 

The smooth running and powerful motor with service free drive guarantees best 

separation results. Aerosol tight and autoclavable accessories are available for save 

handling of infectious material. 

Comfort: display of IS-Situation during the run 

well readable digital display 

motor lid locking 

impulse key for short run 

lid-open-key 

RCF-key 

speed increments 100 rpm 

running time max. 99 minutes 

Cooling MZ011: temperature in 1°C-steps from -10 to 40°C 

pre-cooling function, stand-by cooling 

automatic stop at lid opening or end of time setting 

Safety: stop-display 

microprocessor - controled 

lid locking and emergency lid lock release 

motor- overheating protection 

imbalance switch of 

dimensions (HxWxD) MZ011-UK: 260 x 275 x 347 mm, weight 11,5 kg, MZ011: 260 x 281 

x 547 weight 28 kg 

g-force is depending on used Rotor/Tube as listed below 

power 100 - 127 V, 50 - 60 Hz

Cat. # Rotorcapacity RCF (g-Force) Price [USD] 

MZ011-UK Sprinter centrifuge 1,695.00 

MZ011 Cool Sprinter centrifuge 4,550.00 

MZ011-2425 Aerosol tight lid for 2424/2430 214.60 

MZ011-2424 Rotor for 24 x 1,5/2,0 ml Tubes 18,662 329.00 

MZ011-2427 Rotor for 30 x 0,2 - 2,0 ml Tubes 20,600 479.00 

MZ011-2430 Rotor for 30 x 0,5 ml Tubes 17,749 489.00 

MZ011-2018 Rotor for 4 x Strips á 0,2 ml PCR Tubes 12,49 421.00 

MZ011-2040 Lid for Rotor 2018 73.00 

MZ011-2024 Reduction for 0,2 ml PCR Tubes 2.15 

MZ011-2023 Reduction for 0,5 ml Tubes 2.15 

"ROTOFIX 32A" Table-centrifuge 6,000 rpm, 4,186 x g, 4 x 100 ml or 28 x 15 ml 

ROTOFIX 32A is a robust table-centrifuge for daily routine in research und 

hospital laboratory. The centrifuge is well equipped for tasks in clinical chemistry 

and cytology.The maximum speed is 6,000 rpm, RCF is 4,186 x g. The smooth 

running and powerful motor with service free drive garantes best separation 

results. 

Comfort: well readable digital display, waterproof foil 

lid locking and closing 

Switch over during the run to coose rpm or rcf 


speed increments 100 rpm 


safetey: 

automatic rotor recognise 


imbalance switch -off 

window in lid 

dimensions (HxWxD) MZ011-UK: 257 x 366 x 430 mm, weight 25,0 kg 

g-force is depending on used rotor/tube as listed below 

power: 100 - 127 Volt, 50 - 60 Hz 

Cat. # Rotor capacity RCF (g-Force) Price [USD] 

MZ015 ROTOFIX 32A Centrifuge 1,937.00 

MZ015-1624 swing out rotor 4-fold without suspension 2,665 485.00 

MZ015-1369 suspension for 1624 for 4 tubes 17x100 mm 48.00 

MZ015-1381 reduction for 1624 for tubes max.100 ml 144.00 

MZ015-1347 reduction for 1381 for 15 ml Falcon 70.50 

MZ015-1384 suspension für 1381 for 50 ml Falcon 56.70 

MZ015-1382 hygienic lid PC for beaker 1381 34.10 

MZ015-1324 

swingout rotor 4-fold without suspension up to 

90° 

2,63 783.00 

MZ015-1398 light metal suspension for 1324 73.40 

MZ015-1483 reduction for 1398, 4 x 15 ml Falcon 163.50 

MZ015-1348 reduction for 4 Vacutainer 16x75 / 100 mm 101.60 

MZ015-1617 swing out rotor 8x50 ml Falcon 45° 2,469 625.00 

MZ015-1619 swing out rotor 6x50 ml Falcon 90° 2,701 664.00 

MZ015-1462A reduction for 15 ml Falcon tubes 23.20 

MZ015-1628 swing out rotor 12-fold withot suspension 2,683 378.00 

MZ015-1621 suspension for rotor 1628 f. 17x100 mm 23.20 

MZ015-1660 cyto-beaker, PA-lightmetal for rotor 1624 175.00 

MZ015-1648 cyto-rotor 8-fold with cytochambers 2,400.00 

Microcentrifuge, with or without refrigeration -20°C up to +40°C, 18,000 rpm 

Small bench top centrifuge for molecular biology, virology and 

bacteriology. Tube volume 0,2 ml up to 50 ml and hematocrit capillaries. 

Brushless drive guarantees exceptionally smooth running and speed 

stability; metal housing, centrifugation chamber made from easy to clean 

stainless steel; safety lid with window for speed control; lid looking and 

holding devise; automatic recognise of the rotor, autoclavable fixed angel 

and swinging rotors, three running programs can be stored;

temperature set from -20°C up to +40°C; 

timer 1-99 min. speed: angle rotor 18.000 rpm at RCF of max. 31.867 x 

g 

swing out rotor 13.000 rpm at RCF of max 18.516 x g 

Specifications: temperature MZ005: -20°C bis +40°C; timer 1 - 99 

minutes weight MZ005: 36 kg, dimension 178 x 333 x 620 mm (H x W x 

D) 

weight MZ005-UK: 16 kg, dimension 278 x 333 x 390mm (H x W x D) 

power: 100 - 127 Volt, 50 - 60 Hz 

Cat. # Description Capacity ml or mm RCF 

Price 

[USD] 

MZ005 cooling centrifuge up to -20°C 50 ml max. 5,142.00 

MZ005-UK centrifuge without cooling 50 ml max. 2,798.00 

MZ005-1154-L swing out rotor 90° 24 x 0,5/1,5/2,0 ml 18.516 1,805.00 

MZ005-2218 angel rotor with lid 12 x 0,5/1,5/2,0 ml 23.907 352.00 

MZ005-1195A angel rotor, aerosol tight 24 x 0,5/1,5/2,0 ml 31.514 450.00 

MZ005-2024 reduction for 0,2ml PCR tubes 2.15 

MZ005-2023 reduction for 0,5ml tubes 2.15 

MZ005-1189A angel rotor, aerosol tight 30 x 0,5/1,5/2,0 ml 21.255 569.80 

MZ005-1158L angel rotor, aerosol tight 48 x 1,5/2,0 ml 

21.255 

upper r. 

866.00 

MZ005-1160 angel rotor for PCR-strips 6 x 8x0,2 ml 18.845 550.00 

MZ005-1161 drum rotor, 6-fold with lid 60 x 1,5 ml 14.150 894.00 

MZ005-1377 drum rack 10 x 1,5/2,0 ml 14.150 49.50 

MZ005-1378 drum rack 32 x 0,4 ml Beckman 14.150 128.50 

MZ005-1379 drum rack 

MZ005-1020 swing out rotor for MZ005 only 

MZ005-1015 swing out rotor for MZ005 only 

MZ005-1016 angel rotor for MZ005 only 

21 x 0,8 Bd or 21 x 0,5 

ml 

8x10 ml/17x70; 5 

ml/12x75 

12x15 ml/17x100; 12x5 

ml/12x75 

6x50 ml/29x107; 3x50 

ml/Falcon 

14.150 94.25 

2.879 355.50 

4.105 613.00 

3.904 589.00 

MZ005-1023 Hematocrit-rotor with lid 24 capillaries 21.382 356.00 

Universal 320, without or with refrigeration -20°C up to +40°C, 18,000 rpm 

These universal table centrifuge is useful for sedimentation of cells, 

bacteria, yeast, DNA/RNA and for proteinprecipitation. Universal 320 

means perfectly smooth running at both high and low speeds, versatility, 

an enormous range of easily interchangable accessories and high RCF 

(23.907 for microtubes, 9.418 for 85 ml tubes). Tubes in volume from 0,2 

ml to 100 ml, microtiterplates, haematocrit capillaries and ZYTOaccessories 

can be used at small lab-space. Extremly short run up- and 

run down times, impulse-button, RPM or RCF-setting in 10- steps as well 

as 3 runningprogramms make the centrifuge user friendly. 

Specificationes: Temperature range MZ012: -20°C to +40°C; Timer 1-99 

minutes 

weight MZ012: 52 kg, dimension 346 x 401 x 695 mm (H x W x D) 

weight MZ012-UK: 29 kg, dimension 346 x 395 x 520 mm (H x W x D) 

br> The complete assessories are available on request, please ask us for 

the possibilties for your tube, so fare not listed 

power: 100 - 127 Volt, 50 - 60 Hz 

Cat. # Description Capacity in ml RCF Price [USD] 

MZ012 Cooling centrifuge 100 ml max. 7,076.00 

MZ012-UK Centrifuge without cooling 100 ml max. 3,730.00 

MZ012- 

1689A 

Angel rotor 45°aerosol 

tight 

for MZ012 only 30 x 

0,5/1,5/2,0ml 

21.255 830.00 

MZ012-1612 Angel rotor with lid 12 x 0,5/1,5/2,0ml 16.602 375.00

Top of Page 


MZ012-1613 Angel rotor 12-place 

12x15ml/17x100; 

6x15ml/Falcon 

4.146 525.00 

MZ012-1420 Angel rotor aerosoltight 24 x 0,5/1,5/2,0ml 21.382 475.00 

MZ012-1460 

Swing out rotor w/o 

suspension 

MZ012-1453 suspension f. MZ012-1460 

MZ012-1645 



2-place MTP 2.218 996.00 

1 steel suspension for 

microplates 

453.00 

4-place MPT 1.896. 754.00 

MZ012-4345 suspension f. MZ012-1645 1 steel suspension 230.00 

MZ012-1617 

MZ012-1619 

MZ012- 

1462A 

Swing out rotor w. 




8 x 50ml Falcon, 45° 3.857 713.80 

6 x 50ml Falcon, 90° 2.701 759.00 

Adapter for use of 15ml Falcons 23.50 

MZ012-1624 Swing out rotor 4-place 2.665 555.00 

MZ012-1381 Metal beaker 1 x100ml 164.00 

MZ012-1650 Hematocrit-rotor w.lid 24 capillaries 500.00 

MZ012-1626 Rotor for ZYTO beaker 6 place 2.093 989.00 

Rotina 380, without or with refrigeration -20°C up to +40°C, 15,000 rpm, RCF up to 

24,400 

The high performance bech-top centrifuges Rotina 380 impress by state-ofthe-art 

technology, large capacity, extremely easy handling and exeptionally 

smooth and quiet running. They are mainly used in the fiels of diagnostic, 

genetic research and microbiology. Volumes from 0,2 ml up to 250 ml at large 

capacities as 10 x 50 ml Falcons, 48 x 15 ml or 4 x 250 ml are no problem. 

Extremly short run-up and run down times, impulse-button, RPM input in 

increments of 10 or RCF-input in increments of 1 as well as 3 running 

programms make this centrifuge very easy to operate. 

It features also high safety standards: metalhousing and -lid, automatic rotorrecognition, 

imbalance switsch of, lid locking and holding, emergency lid lock 

release, brushless induction drive. 

Specificationes: Temperaturerange MZ013: -20°C to +40°C; Timer 1-99 

minutes 


weight MZ013-UK: 43 kg, dimension 380 x 468 x 563mm (H x w x D) 

The complete assessories are available on request, please ask us for the 

possibilties for your tube, if not listed 

power: 100 - 127 Volt, 50 - 60 Hz 

Cat. # Description Capacity ml RCF Price [USD] 

MZ013 Cooling centrifuge 250ml max. 8,483.00 

MZ013-UK Centrifuge without cooling 250ml max. 5,329.00 

MZ013-1789 Angel rotor 45°aerosol tight 30 x 0,5/1,5/2,0ml 24.400 1,007.00 

MZ013-1760 



2-place MTP, 45° 2.397 1,418.00 

MZ013-1753 Suspension for MZ013-1760 Metalsuspension 569.00 

MZ013-1717 Swing out rotor 10-place 45° 

MZ013- 

1462A 

w. suspension f. 10 x 50ml 

Falcons 

4.556 1,086.00 

Suspension for MZ013-1717 for 15ml Falcons 23.30 

MZ013-1726 Swing out rotor 6-place 90° 2.808 823.00 

MZ013-1742 Suspension for MZ013-1726 f. 7x15ml/17x100 82.30 

MZ013-1748 Rotor for ZYTO Becher 8-place 1,086.00 

MZ013-1797 Rotor for MZ013 only 8-place 50 ml Falcon 22,789 5,395.00 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Microtiter plate-Thermo-Shaker 

This unique Microplate shaker combines Shaking and Heating. It can either 

shake or heat or shake/heat at same time two/four microplates. It provides 

shaking action 250 - 1.200 rpm / 2 mm amplitude. The heat is transfered to 

the sample from the platform and the heated lid. This heating from both 

sides guarantees a very good temperature stability at low evaporation. The 

temperature can be regulated from 25 °C or RT up to 60°C. 

All electronical functions including the 96 hour timer are microprocessor 

controled. 

L079: weight 6,2 kg, dimension 270 x 260 x 125mm (W x D x H) 

L079-4:weight 9 kg, dimension 380 x 390 x 140mm (W x D x H) 

low voltage external power supply 12 volt, 4.16A 


L079 Shaker/Heater for 2 MTP`s 1,445.00 

L079-4 Shaker/Heater for 4 MTP`s 1,958.00 

Thermo- Shaker für Mikro- oder Deep-Well-Platten 

V 2000 is a unique micro processor controlled shaker incubator for up to four 

microtitre plates. The three parameters, speed, temperature and time are 

programmed via the control panel. Count down remaining time as well as the 

other two parameters are displayed on the LCD. The plates remain visible to the 

user at all times under the clear protection cover. For added safety V 2000 is the 

only incubator on the market to work from a low voltage supply. 

V 2000 is available for all plate heights on request 

* Easy access to all four plates at all times for loading and unloading 

* Uniform heating via air circulation 

* Unique open construction for easy integration with robotic systems 

* Remote low voltage supply for your safety 

* Automatically adjusts to all voltage supplies from 100V to 240V 

* Minimum bench space required 

* Easy to clean and maintain 

* upgradeable for deep well plates 

* Optimal temperature uniformity of plates 

Specificationes:Temperature range 5°C over RT to 45°C - uniformity +/- 1°C 

speed 500-1.300 rpm in 10 rpm steps, 3 mm orbit 

operational conditions 12°C to 30°C 

weight 4,2 kg, dimensions 200 x 520 x 220 mm (W x D x H) 

Remote power supply 24V, 5.4A 

Kat.# Beschreibung Price [USD] 

L092 Thermo- Shaker 4 Microtestplates 2,565.00 

L092-DW Thermo- Shaker 4 Deep-Well-Plates 2,565.00 

Microplate Washer S200 

This microplate washer is the most user friendly manual washer on the market. The user can 

choose to process the plate either in ist storage position- on top of the pump unit or, down on the 

labtop surface. The unit provides a quiet and reliable operation in a compact format, accurate 

dispensing and low residual volumes, adjustable dispense pressure and aspirate force. Further 

features are 

filtered pump inlet and silenced outlet 

fully autoclavable, metal free fluid path 

colour coding for easy maintenance and system modularity 

extremly easy to clean, small footprint, compact in storage 

8 or 12 way wash heads, optional aspirate probes and fill manifolds 

12V DC remote power supply for piece of mind and added safety. 

A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, power 

supply and all tubing. Single modules are available for customers, who have already a vacuum 

pump. 

Specifications: operating voltage/Hz 100-240V 50-0 Hz, max. current requirement 9.6VA, weight 4 

kg, dimensions complete system 250x370x33 mm (WxDxH) 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version


L072 8-channel washer complete 1,911.00 

L073 12-channel washer complete 1,970.00 

L072-8MCT 8-way manifold + carrier + tubing 598.50 

L073-12MCT 12-way manifold + carrier + tubing 658.00 

L072-8MCR 8-way manifold + carrier + reservoir kit 717.50 

L073-12MCR 12-way manifold + carrier + reservoir kit 777.00 

L072-8M 8-way manifold 360.50 

L073-12M 12-way manifold 392.00 

Microplate Washer A1000 

This microplate washer A1000 is a unique processor for the fully automated washing and filling of 

both, 96 and 384 well microplates, including deep well format. It is designed to achieve a fast and 

reliable microplate processing with high precision and repeatability, whilst allowing the user a 

multitude of individual adjustment possibilities. 

The unit provides: 

* accurate dispensing and low residual volumes 

* up to two wash reagents, each with its own fluid pathways 

* unique open construction for easy integration with robotic systems 

* Plate sweep for lowest residual volumes 

* Up to 30 user prgramable wash protocols 

optical liquid level sensing in all reservoirs with visual warning system 

* extremly easy to clean and maintain 

heads available in 8 and 12 way 

* External USB-port or RS232 port ensures robotic integration 

12V DC remote power supply for piece of mind and added safety 

technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 300 

microliter, residual volume 3 microliter per well typical action or 1 microliter per well with sweep, 

dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, wheight 9,2 kg, 

dimension 650x650x350 mm WxDxH. 


L075-8 8-channel washer A1000 4,200.00 

L075-12 12-channel washer A1000 4,532.00 

L075-Wash-S Wash -Level-Sensor 120.00 

L075-Waste-S Waste -Level-Sensor 120.00 

L075-AC Aerosol Cover 695.00 

L075-RP Add. Reagent pump 695.00 

L075-384 Wash head 384 Step 360.50 

Microplate Filler A500 

This microplate filler A500 is a unique processor for the fully automated filling of both, 96 

and 384 well microplates of all possible formats. It is designed to achieve a fast and 

reliable microplate processing with high precision and repeatability, whilst allowing the user 

a multitude of individual adjustment possibilities. 

The unit provides: 

* accurate dispensing precision 

* up to 16 different, each with its own fluid pathways 

* unique open construction for easy integration with robotic systems 

* Up to 25 user prgramable wash protocols 

optical liquid level sensing in all reservoirs with visual warning system 

* extremly easy to clean and maintain 

* RS232 port ensures robotic integration 

* remote control PC software available 

technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, precision +/- 3% at 

300 microliter, residual volume 3 microliter per well typical action or 1 microliter per well 

with sweep, precision CV = +/- 3% 300µl, dispensing volume 25 - 1500 microliter in 25 

microliter increments, speed 2,5 min, wheight 6 kg, dimension 650x650x350mm WxDxH. 


L093-8 8-channel filler 7,168.00 

L093-16 16-channel filler (96 and 384 well plates) 9,980.00 

Microplate-Shake for two or four Plates 

This small, compact unit provides shaking of two or four microplates for immuno assays 

and agglitunation test

needs small footprint only, dimension 220x205x90 mm (wxdxh) 

rotating shaking with speed of 150-1.000 rpm, orbit 2 mm, digital speed display:choosedactual 

timer 0-24 hours with auto stopp 

working temperature +4°C to +45°C 

Power supply 12Volt 500 mA, 110-230 Volt, 50/60 Hz 


L086 microplate shaker for 2 plates 475.00 

L086-A4 platform for 4 MTP´s 55.00 

Orbis "Personal Plate Shaker" 

New, the small handy microplate shaker for reliable efficient and long life operation. Minimal 

footprint, dimensions 93x133x87mm (WxDxH). Open Construction for easy integration with robotic 

systems. Accomodates all styles of microplates. Momentary shaking action, no maintenance 

required. Brushless DC motor for quiet and reliable long life. Variable speed from 950 to 1300rpm, 

orbit 1mm. Orbis plus with timer 1 to 180 minutes. 

Low Voltage for added safetey. Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 Hz 


L070 Microplate shaker 395.00 

L071 Microplate shaker with timer 495.00 

L070-A Tray for 40x1,5/2,0ml tubes 71.60 

L070-D Lid, clear Styrene 52.85 

Personal Microplate Incubator 

The personal microplate incubator for reliable efficient and long life operation. Minimal footprint, 

dimensions 120x180x100mm (WxDxH).The use of unique design and advanced electronic 

temerature control circuitry guarantees an outstanding stable and accurate performance combined 

with quiet and long operating life.Temperature range 5°C above RT to 45°C, build in timer, 

accomodates all styles of microplates. minumum evaporation loses with uncovered plates, no 

maintenance required. 

Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, weight 920g. 


L078 Microplate incubator 698.00 

Microtiter plate-/ Multi-Well-Plate-/ Microcentrifugetube-Shaker 

The shaker provides rotary shaking action with 50 - 1.250 r.p.m / 4mm amplitude. 

It is useful for all application like gentle shaking for cultures and strong shaking 

for tubes and MTP`s. The Shaker is microprocessor controlled and has a constant 

speed also at high frequency. More important for many applications is the gentle 

starting of the shaking process, which avoids a strong disturbing or squirt out of 

the sample at the start of the shaking action. 

the display shows set and real speed 

weight 4,7kg, dimension 240 x 250 x 175mm (L x W x H) 

all come inclusive platforms, trays optional 


L027 Shaker for 4 MTP`s 1,186.55 

L028 Shaker for 8 MTP`s 1,286.55 

L029 Shaker for 4 Multi-Well Plates 1,186.55 

L030 Shaker for 4 x 20 1,5ml tubes 1,186.55 

L030-0.5 Trays für 0,5ml Tubes 5 pc 85.08 



Mini 3D shaker 

A small 3D shaker - stainless steel housing, speed can be set stepless from 15 - 

60 rpm, shaking angel 7°, optional platform for 26 tubes available

dimension: 160 x 150 x 160mm 

loading capacity: 500g, platform size: 200 x 200mm 

weight: 1,2 kg, power: 12Volt, 300mA 

Cat. # Decription Anschluß Price [USD] 

L040 3D-Shaker 220Volt/50Hz 345.00 

L040-A Tube Adapter 49.00 

Multi Dancer, the Multi-Talent 

an ideal shaker for agar-plating techniques 

reciprok-Shaking 0-360°, 30° increments, 0-250 sec timer 

3D-Shaking 0-360° 

Vortexing 0 - 6°, 1° increments, 0 - 5 sec-timer 

speed 5 - 30 rpm, rocking angel 7° 

progarmmable cycles with up to 125 repeats 

max. loading capacity 1kg 

Cat. # Decription Power Price [USD] 

L045-N Multi Dancer 12Volt, 500mA 695.85 

MINI-Rocker 

A small rocker with variable shaking frequency from 7,5 - 30 r.p.m /min 

rocking angel of 7° 

the MINI-Rocker is equipped with a 0 - 24 hour timer and LED display. 

dimension: 200 x 250 x 130 mm weight: 2,1kg 

platform 200 x 200 mm, loading max. 500g 

external power supply: 12 Volt, 500mA 


L024 MINI-Rocker 12Volt, 500mA 475.55 

MIDI-Rocker 

A middle sized rocker with variable shaking frequency from 1 - 50 rpm /min 


Orbitalshaker with 1 - 200 rpm 

Specifications: equipped with a 1 - 9999 minute timer and LED display 

optional available with a second platform 

dimension: 260 x 310 x 130 mm, weight: around 7,0 kg 

platform 260 x 260 mm with anti-slip-mat, loading max. 15 kg 

power supply: 115 Volt, 50-60 Hz 


L026 MIDI-Rocker 230 V/ 50Hz 910§$00 

L026-OS Orbitalshaker 230 V/ 50Hz 945§$00 

L026-P second platform 259§$00 

Maxi Rocker 

A shaker in compact design with a smooth running, strong motor; platform with anti-slip mat. The 

shaker is very useful for cold rooms and rooms with high humidity 

dimension 300 x 300 mm, rocking angel 5,5° ( on request with 4,5 or 7,5° ) 

variable speed of 12 - 50 rpm 

loading capacity 5 kg 

operating temperature from -5°C bis 60°C, maximum humidity 95% 

weight 7 kg, Dimensionen: 335 x335 x 190 mm 

Cat. # Decription power Price [USD] 

L047 Maxi-Rocker 220Volt/50Hz 1,485.30 

Test Tube Rotator, variable speed 

The Test Tube Rotator provides diffusion, dialysis, extraction or mixing.

The electronic controlled stepper motor provides speed from 5 - 50 rpm and a timer set up of 0-99 hrs, 

1-59 min. The Test Tube Rotator is easy to handle through "Memory-" and "Restart"-functiones and 

exchangable discs for tubes from 4 - 40 mm. Angel of rotation can be set from 27° - 90°; adapters allows 

the simultaneous run of 2 or 3 discs. 

Specification: dimensions: 200 x 200 x 250 mm (LxWxH); weight.: 3,5 kg; Motor 220 Volt, 50 Hz 

Cat. # Description quantity x tube Ø Price [USD] 

L009 Var.Rotator 859.00 

L009-4 disc (0,5ml) 40 x 4 - 9mm 136.90 

L009-6 disc 30 x 6 - 9mm 136.90 

L009-9 disc (1,5/2,0ml) 20 x 9-12mm 114.20 

L009-12 disc (15ml) 20 x 12-16mm 114.20 

L009-16 disc 20 x 16-19mm 114.20 

L009-19 disc 18 x 19-22mm 114.20 

L009-22 disc 15 x 22-25mm 114.20 

L009-25 disc (50ml) 12 x 25-28mm 114.20 

L009-28 disc 10 x 28-32mm 114.20 

L009-32 disc 10 x 32-40mm 114.20 

L009-A adapter 1 114.20 

Test Tube Rotator 

For mixing, diffusion , dialysing, hybridisation etc. 

A synchronous motor with slow rotation speed of 10 rpm, which permits tube exchange while operating. 

The rotating disc can be set continously at an angle between 90 and 27°. The disc has a diameter of 

200 mm and has chemical resistant clamps. 

The instrument has a weight of 4 kg, dimension is 200 x200 x 205 mm (l x w x h) 

For ordering discs please use discs from L009! 

Cat. # Description Quantity x tube Ø Price [USD] 

L004 Rotator 220Volt,50Hz 425.00 

Mini - Rotator, Standard 

This is a place saving mixer fore 22 microcentrifuge tubes or 22 x 15ml tubes with max. 15mm 

diameter. 

Specification Standard Rotator: speed 5 – 30 rpm, maximum continous operation time are 8 

hours, digital timer, LED display 

weight: 1,0kg, dimension: 310 x 110 x 175 mm 

delivered: rotator with standard platform 


L053 Mini Rotator standard 12 Volt/ 500mA 446.00 

L053-16 platform for 4 tubes up to 30mm Ø / 12 tubes up to 15mm Ø 52.00 

Mini – Multi-Rotator 

This is a place saving mixer for 22 x 1,5/2,0 ml microcentrifuge tubes or 22 x 15 ml tubes up to 

max. 15 mm Ø.. 

Specification Standard Rotator: 

specification Multi-Rotator: functiones: rotation, vortexing 0-5°, reciprocal overheadmixing 15 - 90°, 

speed; 5 – 60 rpm 

continous run by 24 hour timer 

weight: 1,6kg, dimension 310 x 110 x 175mm 


L054-N Mini – Multi-Rotator 12 Volt/ 500mA 645.00 

L054-4/12 platform for 4x50/12x1,5-2,0-15ml 52.00 

Orbital Shaker 

a compact orbital shaker with simple 

interchangable platforms for flasks and plates.

Shaking speed 50 - 250 rpm with digital display 

and timer 1-24 hours. 

Amplitude 20 mm, maximum loading capacity 

2,5 kg 

working temperature: 4 - 45°C, non condensing 

weight: 2,2 kg, dimension 220 x 190 x 70 mm 

Cat. # description Platform size Price [USD] 

L044 Orbital Shaker 12Volt,800mA 735.00 

L044-F 

L044- 

F/6 

L044- 

F/12 

universal bottle 

platform 

with 3 adjustable 

bars 

270 x 195mm 147.90 

platform for 6 x 250 - 300ml 250 x 190mm 147.90 

platform for 12 x 100 - 150ml 250 x 190mm 147.90 

L044-P platform for petridishes etc. 220 x 220mm 49.10 

Orbitalshaker - MULTI-POWER 

The Orbital shaker MULTI-POWER is an ideal instrument for intensive mixing of biological 

suspensiones or chemical componentes in bigger volumina with a total capacity of 15 kg. 

The shaker can be used continously during several days for extractiones, tissue cultures, 

rotation of closed flasks for dialysis Dialyse. 

userfriendly processor controlled program, LCD-Display 

3-fold Modus: orbital, reziprocal-orbital, vibration 

Specificationes: Shaking speed 5 - 250 rpm 

digitale display and timer 1min-96 hours. 

Amplitude 20 mm, maxium load up 15,0 kg 

large platform withfixation rols 460 x 400 mm 

working temperature: 4 - 45°C, no wetrooms 

weight: 19,3kg, dimension 485 x 520 x 140 mm 


L048-N Orbitalschüttler AC 12 V, 830mA 2,695.85 

L048-P Plattform with Anti-slip-mat 430 x 380 mm 167.30 

RockŃ Roller 

The RockŃ Roller keeps samples in gental motion by rocking while rolling. 

14 stainless steel rotating bars guarantee an even mixing of samples. The 14 rolls, size 

208 x 10 mm(L x Ø) are moved with 10 rpm, rocking frequency is 5 cycles /minute at 35° 

movement. 

Weight: 3 kg, dimensions: 330 x 300 x 190mm (L x W x H) 

L005-V has a variable roll- and rocking speed, which is controled by an external motor : 5 

- 25 rpm; 2,5 -12,5 cycles/min 

L005-SL is a roller with 6 excentrical diagonal moving PVC-rolls, useful for bottles up to 

1000 ml, constant rolling speed: circa 50 rpm The soft rocking causes a very care mixing, 

useful for blood, cell suspensions, chemical based fluids like colors, cosmetics, oils etc.. 

Spezifikation: lenght of rolls 26mm, overall dimension: 380 x 270 x 100 mm (L x W x H) 


L005 RockŃ Roller 220V, 50hz 830.50 

L005-V RockŃ Roller, variabel 220V, 50hz 1,150.37 

Rotary Mixer 

The Rotary Mixer provides serial rotation of test tubes with a diameter range from 4 - 

27mm. The mixer has a stepless controllable motor with a speed of 5-50 rpm. All parts 

are from aluminium or stainless steal construction. The drums and bars are easy to 

exchange. The digital read out shows speed and time from 1-99 hrs, 1-59 min.. Easy 

handling is provided through "Memory-", "Restart-" und "autostop"-functions. 

Weight 3,3kg, dimensions 450 x 170 x 190mm(L x W x H), power 220volt/50Hz

Cat. # Description Quantity x tubeØ Price [USD] 

L010 Rotary-Mixer 945.77 

L010-16 bar 20 x 16-20mm 161.50 

L010-19 bar 18 x 19-22mm 161.50 

L010-22 bar 18 x 22-27mm 161.50 

L010-4 drum 104 x 4 - 6mm 499.00 

L010-6 drum 104 x 6 - 9mm 499.00 

L010-9 drum 104 x 9-12mm 499.00 

L010-12 drum 48 x 12-16mm 296.50 

L010-912 drum 56 x 9-12mm 334.00 

Programmable Overhead Mixer "Multi-Mix" 

The overhead mixer "Multi-Mix" is a quiet and reliable microprocessor controled unit 

for stirring up to 20 liters. "Multi-Mix" is usable up to seven days continously. Three 

types of motion, standard , reciprocal and vibration, garant a strong mixing of fluids 

up to the medium viscosity area. "Multi-Mix" is an ideal equipment for laboratrories 

in biotechnology, analytic and chemical synthesis. Powered by an external 12 V/800 

mA AC/Adapter it is safe and economical. The combination of three motion types 

provides a high level of homogenicity due to combinatiobn of laminar and turbulent 

flows, which causes faster dissolving of substances. 

Specificationes:speed regulation range 40 - 1000 rpm 

Timer for reciprocal motion 0- 250 seconds 

Timer for vibration 0-5 secunds 

General-Timer 1 min - 96 hours 


weight 2,5 kg 

power: 12 V/800 mA AC/Adapter 


L085 Multi-Mix 1,136.85 

L085-1 Paddel stirrer 70 x 70 mm 55.77 

L085-2 Propeller stirrer 2-blades 60 mm diameter 55.77 

L085-3 Propeller stirrer 3-blades 50 mm diameter 55.77 

L085-4 Anchor stirrer D= 90 mm, 48 mm Höhe 55.77 

L085-5 Centrifugal stirrer 50 mm diameter 55.77 

High Speed Vortexer für Tubes 

This flexible unit was designed, to fulfill the increasing inquirements regarding 

mixing of samples. The Vortexer can be used in a variety of applications as general 

microtube mixing, mixing of e. g. suspensions of cells and microorganisms, 

chemicas and espcialy when high speed vortexing is needed in DNA/RNA 

preparation steps in microcentrifuge or falcon tubes. For the preparation of 

sequencing steps is often high speed vortexing needed, which can be done with this 

vortexer up to 3,500 rpm. 

Shaking speed: 400 - 3,500 rpm, amplitude: 3 mm 

Timer 0- 60 minutes or non stopp ( maximum 8 hrs) 

Dimension: 145 x 170 x 180 mm, weight: 2,9 kg 

supply: vortexer without platform, please order platform separately 


L087 High Speed Vortexer, power supply AC 12 Volt, 830 mA 588.00 

L087-32 platform for 16 x 1,5 ml - 8 x x0,5 ml - 8 x 0,2 ml tubes 28.50 

L087-8/15 platform for 8 x 15 ml tubes, D = 16 mm 28.50 

L087-4/50 platform für 4 x 50 ml tubes, D = 30 mm 28.50 

L087-10/10 platform für 10 x 10 ml tubes, D = 12 mm 28.50 

Power-Mix 

"Power Mix" is an universal vortex mixer for test tubes from 7 to 35 mmØ. The instrument can be used in

"Press-to-mix" action or continously. The stepless speed can be controlled up to 2.500. By using further 

additional accessories 96 well plates can be mixed as well as 20 x 1,5 ml centrifuge tubes at same time. 

Specification: weight 3,2 kg, dimensions: 135x120x135 mm (L x W x H) 


L002 Power Mix 385.00 

L002-MTP micro-titre-plate-holder f. 1 x96 plate 69.85 

L002-MRT mini-reaction-tube holder f. 20 tubes 85.65 

L002-1TTH one position test tube holder 65.91 

L002-2TTH multi position tube holder f. 7 tubes 127.14 

L002-UKP universal contact plate 40.53 

MINI-Vortex 

A space saving instrument to mix small samples in tubes from 1,5 to 50 ml. The MINI-Vortex can 

be used continuesly or in the press-to-mix mode. Speed can be setted variable from 300 to 2.500 

rpm 

Size: 140 x 85 x 70 mm 

Weight: 0,8 kg 

external Powersupply: 12 Volt/300 mA 


L023 MINI-Vortex 12Volt/300mA 225.80 

Tube Vortexer 

A very economical priced equipment for mixing 0,2 - 0,5 -1,5/2,0 ml microcentrifugentubes,e.g for 

vortexing of bacteria/yeast cultures and for DNA/RNA purification. 

Spezifikation: capacity 9 x 0,2 ml - 8 x 0,5 ml - 16 x 1,5/2,0 ml 

speed variabel 250 - 3,000 rpm, amplitude 2 mm 

dimension / weight 120 x 180 x 100mm / 1,5 kg 

Cat. # Desciption Power Price [USD] 

L055 Tube Vortexer 220Volt, 50Hz 356.07 

Magnetic Stirrers and Hotplate Magnetic Stirrers 

electronical speed controlle, speed range from 50 bis 1.250 rpm, double housing of aluminium and 

thermovacuum formed plastic, coated with electrostaticly applied powder, which is corrosion 

resistant; stirring capacity 5 or 20 liter 

Specification: weight 2,2 kg, dimension 172 x 286 x 80 mm(L x W x H) 

stainless steel 155 mm ø 

Magnetic stirrer with Aluminium-hotplate for stirring and heating at same time or indpendant. 

Temperature range is 50 - 325°C at 600 Watt, 

speed range 50 - 1.250 rpm Mixing/heating on 145mm plate of volumina up to 5/ 10/ 20 liters . 

The aluminium housing is equipped with M10 threated support rod connection. Working 

temperature is 5-50°C, allowed humidity is 90% 

Specification: weight 2,8 kg, dimension 172 x 286 x 125 mm (L x W x H) 

Cat. # Description motor rating in/out Price [USD] 

L012-5 Magnetic Stirrer 5 Liter 22 / 2,2 watt 295.30 

L012-20 Magnetic Stirrer 20 Liter 13 / 5 watt 450.90 

L014-5 Hotplate/Magnetic Stirrer 5 L 22 / 2,2 watt 450.70 

L014-10 Hotplate/Magnetic Stirrer105 L 22 / 2,2 watt 550.45 

L014-20 Hotplate/Magnetic Stirrer 20 L 22 / 5 watt 625.60 

Mini-Magnetic Stirrer 

A small motor driven magnetic stirrer in a stainless steel housing with enough mixing power for

Top of Page 


many applications in the lab. Stepless speed regulation from 150 - 3000 rpm 

dimension: 120 x 150 x 65 mm 

dimension plate: 110 x110 mm 

mixing capacity: 2 liter 

weight: 1 kg 

external powersupply: 12Volt, 300 mA 

Cat. # description Electrical requirement Price [USD] 

L025 MINI-magnetic stirrer 12Volt, 300mA 232.40 

Multi Position Magnetic Stirrers 

All possibilities in one microprocessor controlled productline, all positiones individual to 

control: 

with or without heating 

4 or 6 positions - square or bench form 

hotplates made from 120mm stainless steel 

speed range 50 – 1200 rpm, energy 10 – 300 Watt/ Position 

Cat.# Configuration Hotplate dimension weight kg Price [USD] 

L060 4-Position,bench form no 545 x 245 x 110 7,2 1,190.00 

L061 6-Position,bench form no 830 x 245 x 110 10 1,282.40 

L062 4-Position, square no 335 x 400 x 110 7 1,190.00 

L063 6-Position, quare no 500 x 400 x 110 9,8 1,282.40 

L064 4-Position,bench form yes 545 x 245 x 155 9,2 1,939.55 

L065 6-Position,bench form yes 830 x 245 x 155 13,2 1,326.00 

L066 4-Position, square yes 335 x 400 x 155 9,4 1,939.55 

L067 6-Position, square yes 500 x 400 x 155 13 1,326.00 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







PAP PEN 


drawn around a specimen. The barrier of the PAP PEN retains antisera 

within the defined area and ensures, that only the amount of antobody 

needed for sufficient reaction is used. The PAP PEN stops spreading, 

reduces waste and divides slides into discret areas for immunostaining, 

histology, cytology, cell culture, virology, microbiology. The PAP PEN is 

effective for immunostaining, PAP method, ABC method, ASD method, 

enzyme and frozen section methods. 

The staining is unsoluble in aceton and alcohol and can be removed if 

desired by xylene after the staining procedure. 


MKP-1 Pap Pen Immunostaining Pen 53.80 

MKP-2 Pap Pen Immunostaining Pen, extra thick 69.50 

New: Slide Boxes colored, for 100 Slides 

The slide boxes have cork liming on the bottom, to protect the slides. On the inside cover of the 

box is a corresponding inventory slide sheet. The boxes can be stored securely on top of each 

other and are closed with a rust resistant nickel plated clasp ande hinge pin.Dimensions are 222 x 

171 x 33mm ( LxWxH ) 

Optional we offer stainless steeel freezer racks to store the slide boxes in upright freezers for 

longtime storage of temperature sensitive samples. You find infos and prices in the chapter CRYO 

PRODUCTS. 

cat.# Color Pack size Price [USD] 

R100-B blue 1 7.08 

R100-G green 1 7.08 

R100-Y yellow 1 7.08 

R100-R red 1 7.08 

R100-W white 1 7.08 

R100-GRA grey 1 7.08 

R100-SCH black 1 7.08 

Combed, Scrubbed Nylon Wool Fiber, Type R 

Print version 

Separation of T-cell from B-cell lymphocytes with Nylon Wool Fiber 

Mononuclear leukocyte concentrates from freshly drawn blood can be separated into T-cell and B-cell enriched fractions using 

"Nylon Wool " Mononuclear lymphoid cells may be preseparated from the polymorphonuclear (PMN) leukocytes and 

contaminating erythrocytes by centrifugation on an isopynknotic solution of IsoPrep (specific gravity 1.077gm/liter). If an 

isopynknotic solution is not used, the polymorphonuclear (PMN) leucocytes will adhere tightly to the nylon wool, while any 

erythrocytes will be eluted with the nonadherent cell fraction. Prior to the fractionation procedure, the mononuclear cells are 

washed once in Hank`s Balanced Salt Solution, counted and resuspended in Hank`s Balanced Salt Solution supplemented 

with 10% fetal calf serum (FCS) or in other cell growth media like RPMI 1640 with 10% FCS, Earl`s Saline with 10% FCS or 

Dulbecco`s PBS with 5% FCS. 

Our Nylon wool works well with e.g. human, mouse and rat cells. Please see also: current protocols in Immunology (1992) 

3.2.1-3.2.4, contributed by K.S.Hathcock, T-Cell Enrichment by nonadherence to Nylon, John Wiley " Sons, Inc. 

Cell Separation Procedure 

1) T-cell enriched fraction 

Pack tightly 0,5gram of sterile Nylon wool to a 10ml sterile syringe. Wash and equilibrate the Nylon 

Wool with selected media HBSS or RPMI 1640 with 10% FCS. 

1-2 x 108 mononuclear cells suspended in 2ml of media are pipetted onto 0,5grams of sterile 

Nylon wool. 

Incubate the syringe at 37°C for 45 to 60 minutes. 

Collect nonadherent T-cells by washing with HBSS and resuspend. Do not plunge. 

B-Cells are reduced in the syringe up to 3%, larger numbers of cells may be separated, when the 

amount of nylon wool (e.g.1g) and the size of the syringe is proportionally increased or by 

repeating the procedure. 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

Top of Page 


2) B-cell enriched fraction 

After elution of the not adherent T-cells from the Nylon Wool Fiber, the syringes are stoppered and 

filled with HBSS supplemented with 10% FCS. The syringes are opened and sterile plungers of the 

syringes are used to force the medium through the Nylon Wool Fibers. The cells are washed once 

in in HBSS and resuspended. 


MKN-10 Nylon Wool Fiber 10g 38.00 



Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Silica-/ Glas-/ Biodegradable 

Particles 

Polystyrene-/ Coated-/ Flow 

Cytometry-/ PMMA-/ 

Melamine-/ NIST Paricles 

Magnetic Particles 

Top of Page 



This chapter includes a list of different special and standard beads or also called 

microspheres made of different materials for many applications. You will find beads from 

0,05 to 1000µ. Particles up to 10µ are very monodisperse and have low standard 

deviation. 

Most microparticles are supplied in deionized water and have a long shelf life of several 

years when stored at 4°C. Biodegradable microparticles, made on basis of e.g. starch, 

have a shorter shelf life and should be used faster. 

All particles are offered in convenient laboratory quantities, nevertheless, most of them can 

be offered in bulk quantities or higher concentrations. Please ask for quotation, if you 

have bigger demands. 

If you do not find the particle for your application, we will be happy, to check the 

possibility of a custom synthesis. 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Top of Page 


Print version 

About us 

Discovery Scientific Inc. is a Vancouver-based firm focused on delivering leading edge 

instrumentation, software and consumables to clients in the life and analytical sciences across 

Canada. The company was established in 2005 by experienced instrumentation sales and 

marketing specialists to provide full distribution and customer support capability to non- 

Canadian manufacturers seeking to establish or expand their sales in the Canadian marketplace. 

The company?s product lines are targeted at the genomics, microbiology, environmental, 

proteomics, liquid handling and robotic integration markets. More information about Discovery 

Scientific is available from its web site at www.discoveryscientific.com. 


The Catalog 

We have released our first online catalog. You are invited to look through 16 different chapters, 

where the products and specialties are described in detail. The customer will find price and 

ordering information just at the product. For your convenience orders can be filled in a second 

window and released by different possibilities. 

Technical Service and Delivery Time 

Our Service Department has long experience in the scientific field to answer your upcomming 

questions as best and soon as possible. 

Our stock of consumables allows delivery within Germany mostly same day, while foreign 

customers should plan a few days, to prepare export paper work. 

Quotations are made promptly depending on the informations, we are getting from the 

customer. Custom synthesis and custom manufacturing quotes will be prepared as soon as 

possible and without costs for our customers. Please ask also for quantity purchases on a yearly 

demand basis. 

Worldwide Delivery 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

We are working with domestic and international distributors, which are listed under Contact & 

Order. Distributor inquiries for areas, currently not covered, are always welcome. 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Newsletter 

From now on we provide an email newsletter for faster information about product 

news. To the registration 

Catalogue 

News 

Our current catalogue is available now. You will find additions concerning products 

and prices on our homepage. 

If you lost your exemplar or did not get one, use the blank to order it. 

Digi-Image, Gel-Documentation-System 

The new Gel-Documentations-System is a compact "Low-Budget"- 

System inclusive 8 megapixel camera and 8" TFT colour monitor... 

read more... 

New: IsoFreeze PCR-Rack 

personal PCR chiller rack with special gel-filling 

maintains samples cool (under +4°) for 3 hours 

color change from purple to pink at +7°C 

useful for PCR-Tubes, - Strips and -Plates 

Special Price: Cat.# KR-96 49,80 Eur/2 Racks 

Price ex shipping and VAT 

We have introduced new products, current informations are available on our 

homepage. 

CombiCycler 

"CombiCycler with combined block for 0,2 and 0,5 ml PCR- 

Tubes compact - flexibel- low cost" 

Cat.# LCC-41 CombiCycler inclusive block 2.150,00 

Price net exclusive shipping. 

read more ... 


Septa und Tubes 

for ABI PRISM 310 

read more ... 

Our range of beads is continously growing. You find different beads for most 

typical and many untypical applications like Calibration, Detection, Size 

Standarisation, biological applications like Flow Cytometry, Protein- & Antibody 

coupling, Magnetic Separation and for the production of immunoassays. 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version

Top of Page 


Particles are now available from 10nm to 1000µ, many with different chemical 

coatings. 

Materials include polystyrene, silica, glass, pmma, melamine, polylactide, gold, 

paramagnetic silica and paramagnetic polymers 

For more information look through the chapter Microparticles. 

Special offer 

10 % introductory price on our new 

Eco-Power-Supply 

250 V - 400 mA - 100W 

read more ... 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Products Catalog Overview 

Each product is described with more detailed 

informations including pack sizes and prices. 

To get these informations please click "go!" 

For online or fax orders please click button 

"Contact & order" 

You may also download the complete 

catalogue as PDF document (appr. 6,2MB) 

Print version 

Filter Tip DNA-Workstation & Hybridisation 

Filtertips to avoid cross-contamination in PCR. 

Volume size from 0,1-1000µl, supplied as sterile 

racks or in bags. All are DNase-, RNase-, pyrogen 

free. The beveled form ensures high precision. 

Discounted bulk prices are offered. 

Pipet Tip Thermal Cycler 

We offer a complete line of pipet tips for various 

applications. Special tips like siliconized, beveled 

tips and robotic tips for Beckman Biomek & Zymark 

are all certified DNase-, RNase-, pyrogen free. 

With several variants of DNA-Workstations we offer 

the possibilty to set up a contamination free work 

place for pre and post sample processing. The work 

places are small and easy to clean. Hybridisation is 

taking place under absolut controlled conditions in the 

Hybridisation ofen. The capacity of 3, 6 or 12 high 

quality hybridisation bottles is variable. 

DNA amplification has become a standard technique 

and with our thermal cycler we offer a new 

inexpensive instrument. It features heated lid for oil 

free cycling, unlimited program storage, 

interchangable block formats for 0,5ml, 0,2ml and 

slides, subambient cooling capabilities, extremly small 

footprint. 

Gel Loading Tips & Pipettors Dry block heat bath 

Our gel loading tips are specialy suited for loading 

gels or recovery of samples. Tips with orifices from 

0,54mm down to 0,17mm are available. Using flat 

tips with 0,17mm, loading of sequencing gels is 

easy and convenient. 

Many sample need to be heated or cooled under 

controled conditions. We offer several types, from a 

low budget 53 places dryblock heat bath up to a dry 

block heat & cool bath, which allows to cool samples 

up to -4°C and to heat up to 95°C. All of them need 

small space only to fit in all types of laboratories. 

PCR Tubes and Plates Mini Centrifuges 

0,2ml & 0,5ml ultrathin PCR tubes and 8-strip tubes 

are manufactured from high polished moldes and 

ultra pure polypropylen. The longer cap design 

ensures leak free PCR, avoiding evaporation. PCR 

plates are available as 24, 32, 48, 98, 384 PCR 

plates, all PCR products are certified DNase-, 

RNase-and pyrogen free. 

Where space ist almost limited our micro centrifuge is 

the best solution, to concentrate small samples at 

6.400r.pm. The unit has only 12 cm Ø at 800g 

weight. Our new combi centrifuge allows centrifuging 

and vortexing in one instrument. Mini centrifuges with 

up to 14.000 r.pm. are also an ideal instrument for 

DNA work. 

Centrifuge Tubes Rotator & Vortex Mixer 

Have a look to the highest quality of siliconized 

tubes, microcentrifuge tubes and screw cap tubes. 

They are certified DNase-, RNase-, pyrogen and 

metall free. Siliconized tubes ensure, that full 

amounts of enzymes or proteins are captured. 

Colored tubes are made of metall free dyes. 

For small university budgets we offer a line of 

different rotators for mixing, dialysis etc of samples. 

The rotators are available economical priced with 

10r.p.m fixed speed or more convenient with variable 

speed. A variety of discs allows mixing of tubes from 

4 - 40 mm Ø. 

Rack Systems Nylon Wool & PAP PEN 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

We offer a complete line of racks for different Mononuclear leucocyte concentrates from freshly

Top of Page 


applications. Most popular is our low priced 

autoclavable combi rack, which accept on 4 sides 

different tubes from 0,5 to 50ml. For pre & post 

PCR sample processing we offer the PCR 

Workstation, including a 96 well satelite rack for 

0,2ml PCR tubes. 

Cryoproducts Microparticles 

All your needs for cryo preserversation you find 

here: polypropylene cryoboxes or cardboxes in 

different colors and sizes to accept tubes from 

0,2ml to 50ml, stickers "hot-cold" stable in liquid 

nitrogen and under autoclaving conditions. We also 

manufacture cardboxes for your special needs. 


Kisker X-ray cassetts are featuring extremly low 

radiation absorption and are manufactured for long 

shelflife. They can be used up to -70°C for 

exposure. For exposure we offer a complete line of 

high sensitive intensifying screens at reasonable 

prices. Film hangers, development tanks and 

further supplies help you to do your research. 

drawn blood can be separated easy into B-cells & Tcells 

using Nylon Wool Fiber. The Nylon Wool is 

combed, washed and ready to use. The PAP PEN 

provides a water repellant barrier, when circling 

around a specimen. Quantity of antibodies is reduced 

through the circal. PAP PEN is effective for 

immunostaining methods as PAP-, ABC-, BSA-method. 

We offer a wide range of microparticles and many 

types of special beads for various applications. The 

microparticles are made from different materials, 

polystyrene, silica, melamine, glass, magnetit, 

available in sizes from 100nm up to 1000µ. Many of 

them can be supplied fluorescent or dyed. We offer 

bulk quantities and can arrange custom synthesis at 

reasonable prices 

Print version 



Contact 

Order 

Terms 

Fax form 

Impressum Contact & Order 

Martin Peet 




Canada 

Tel: (877) 736-3439 (toll-free) 

or (604) 736-3439 

Fax: (604) 736-3479 

Cell: (778) 899-5855 

Email: 

martin.peet@discoveryscientific.com 

Headquarter 

Distributors 

G. Kisker GbR 

Produkte f.d.Biotechnologie 

Postfach 1329 


Germany 

To send us notes or to request any special 

informations, quotations for bulk or custom 

synthesis please click contact. 

To order through a distributor in your country please contact: 

Argentinia 

Paul M. Kirmayr 

Associate Manager 

P&LK Tech SRL 

Av. de Mayo 580 4to. P. Of. 3 

1084 Buenos Aires 

Email: info@plktech.com.ar 

Australia 

distributor inquiries for 

distributorship welcome 

Belgium 

BaseClear Labproducts B.V. 

P.O.Box 1336 

2302 BH Leiden 

The Netherlands 

phone 31 71 5233917 

fax 31 71 5235594 

Email: info@baseclear.com 

Canada 

Martin Peet 




Canada 

Tel: (877) 736-3439 (toll-free) 

or (604) 736-3439 

Fax: (604) 736-3479 

Cell: (778) 899-5855 

Email: info@microparticlesnanospheres.com 

Information & orders: 

www.microparticlesnanospheres.com 

If you would like to order, you have the possibility 

to order on-line or to print out an order form. 

If you have questions regarding products, please 

call (877) 736-3439 (Toll-Free). 

India 

phone: +49 2551-864310 

fax: +49 2551-864312 

contact@kisker-biotech.com 

www.kisker-biotech.com 

VAT-No.: DE 813219640 

India-West 

NTCO 

301/B3,Shruti Park, 

Kolshet Road,Dhokali, 

Thane-west,Pin code:400 607 

Maharashtra,India 

phone 91 22 2589 4533 

mobile: 91 93244 92333 

Email: ntco@mtnl.net.in, salesntco@rediffmail.com 

Contact Person: Mr.Nikhil Tipnis. 

India-East 

PRO LAB MARKETING PVT.LTD 

A-303, Ansal Chambers-I 

3 Bhikaji Cama Place, New Delhi- 110 066 

phone 0091-11-55607725 (D)5565 

fax: 009-11-55607726 / 5165885 

info@prolabmarketing.com 

India-South 

Spectrum Scientifics 

H.No.12-7-105/A, New Mettuguda 

Andhra Pradesh 

500 017 Secunderbad 

phone 0091 40 27821312 

fax 0091-40 27004546 

spectrumscs@sancharnet.in 

Indonesia 

CV Indolab Utama 

JI H Ahmad R No 29 

Pondok Bambu 

Jakarta, 13430 

fax/phone: 62-2186606405 

Email: indolab_utama@telkom.net 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version

Discovery's main web site: 

www.discoveryscientific.com 

Chile 

Pablo Sakamoto 

Apoquindo 5555 - OF.712 

Las Condes 

Santiago de Chile 

Tel: (562)426 0444 

Fax: (562)378 5253 

Email: psakamoto@fishersci.cl 

China 

Grandtech Scientific China Limited 

Room 2018 Grandtech Centre, 

8 On Ping Street, 

Shatin, Hong Kong 

Tel : 852-31021978 

Fax: 852-31021976 

Mobile : 852-92101291 

Email: info@grandtechsci.com 

CROATIA 

Gorea Plus d. o. o. 

Svetonedeljska cesta 97 

10431 KERESTINEC 

Hrvatska (Croatia) 

phone: +385 1 33 69 610 

fax: +385 1 33 69 611 

direct:. +385 1 33 69 622 

mobile: +385 98 279 389 

Email: management@gorea-plus.hr 

general mail: gorea@gorea-plus.hr 

http://www.gorea-plus.hr 

Czech Republic 

PentaGen, s.r.o. 

P.O. Box 5 

27351 Unhost 

phone: 602 441 331, 606 787 606 

fax: 227 203 588 

Email: info@pentagen.cz 

www.pentagen.cz 

Denmark 

Frisette ApS 

Godthaabsvej 4 

DK-8400 Ebeltoft 

phone: 86342244 

fax: 86345744 

Email: agf@frisenette.dk 

www.frisenette.dk 

Egypt 

Egypt Germany Co. (EGCO.) 

building 21, Flat 21 

Zahraa EL-Hei EL-Ascher 

Nasr City - Cairo - Egypt 

Tel: (202)4104662 

Fax: (202)4104662 

Email: ECGO_Cairo@web.de 

Espania 

Attendbio 

Parc Tecnològic del Vallès 

Centre démpreses de Noves 

Tecnologíes 

Ronda Can Fatjó s/n 

08290 Cerdanyola del Vallès 

(Barcelona) 

Tel: 93 582 43 73 

FAX : 93 582 4374 

Email: attendBio@attendBio.com 

Italy 

LifeLineLab Srl 

Via Nicaragua 12/14 

00040 Pomezia (Rome) 

phone: +39 06 916 016 28 

fax: +39 06 916 124 77 

mobile: +39 348 31 80 047 

Email: info_@lifelinelab.com 

Korea 

Seechem International. 

Room1730, Rosedale bldg 

724, Suseo-dong, Gangnam-gu 

Seoul, KOREA 135-744 

tel : +82 2 6241 0288 

fax: +82 2 6241 0289 

Email: info@seechem.com 

http://www.seechem.com 

Kosovo 

KosovaMed 

Gjakove - kosove 

Tel: 390 26 411 

Fax: 390 23 363 

Email: kosovamed@hotmail.com 

Netherlands 


P.O.Box 1336 



phone 31 71 5233917 

fax 31 71 5235594 

Email: info@baseclear.com 

Poland 

MEDianus Sp. z o.o. 

Cystersów Str 13/2 

31-523Cracow 

Poland 

tel: +48-12-6653131 

fax: +48-12-6653132 

Email: medianus@medianus.net 

Portugal 

VIDROLAB 2 – Vidros e Material de Laboratório, Lda. 

Trav. D. Afonso Henriques, 59/75 

Vilarinho de Cima - Paredes 

4585-248 GANDRA (PRD) 

PORTUGAL 

Tel. 00351-22-4119999 

Fax. 00351-22-4119990 

Email: comercial@vidrolab.pt 

www.vidrolab.pt 

Singapore 

Rita Tan 

A-Z Solutions 

51 Bukit Batok Centre 

#07-33 Unity Centre 

Singapore 

phone: 63161068 & 63162783 

fax: 63167162 

Email: azsolve@singnet.com.sg 

Slovakia 

Lambda Life a.s. 

Bojnická 20 

831 04 Brasislava 3 

Tel: 421/2/44 880 160 

Fax: 421/2/44 880 165 

Email: janitor.martin@lambda.sk 

www.lambda.sk

Top of Page 


France 

distributor inquiries for 

distributorship welcome 

Greece 

Lab Supplies 

P.Galanis 

2, Iofodos Str. 

11634 Greece 

phone/fax: 1-7294603 

Email:labsupplies@groovy.gr 

Hungary 

Biocenter KFt 

Temesvári krt.62. 

6726 Szeged 

Tel: +36-62-599 750 

Fax: +36-62-599 751 

Email: abraham@biocenter.hu 

www.biocenter.hu 

Iceland 

Alexander Schepsky 

CisTron ehf 

Heidargerdi 98 

108 Reykjavik 

Email: alexansc@hi.is 

Tel.: +354 695 2832 

Slovenien 

Promed d.o.o. International d.o.o. 

Leskoskova cesta 9D 

1000 Ljubljana 

Slovenia 

Tel: 00386 1 5202 302 

Fax: 00386-1-5202 164 

Email: Promed@s5.net 

South Africa 

Anatech Instruments (Pty) Ltd 

P O Box 98485, Sloane Park, 2152 

Gauteng, South Africa 

Tel : 0027 11 462 6776 

Fax : 0027 11 704 6490 

Menno@anatech.co.za 

Taiwan 

Peak Technology Co., Ltd. 

6F, No. 20. Sec. 1, Wuchang St. 

10044, Taipei 

Taiwan 

Tel:+886-2-2381-5966 

Fax:+886-2-2381-5968 

Uganda 

Coulter Biotronics Ltd 

Felly Odongo, 

Plot 27 Clement Hill Road 

P.O. Box 36101 

Kampala UGANDA 

phone +256 712 483586 

UK 

distributor inquiries for distributorship welcome 

USA 

Martin Peet 




Canada 

Tel: (877) 736-3439 (toll-free) 

or (604) 736-3439 

Fax: (604) 736-3479 

Cell: (778) 899-5855 

Email: info@microparticles-nanospheres.com 

www.microparticles-nanospheres.com 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 







Top of Page 


Site Map 

Product Catalog 

Catalog Overview 

Filter Tips 

Pipet Tips 

Gel Loading Tips 

& Pipettors 



Rack Systems 

Cryoproducts 



Documentation 








Others 

Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 

Home 


News & special offers 

Contact & Order 

Contact 

Order 

Terms & Conditions 

Fax form 

Impressum 

Sitemap 

Print version 



Contact 

Order 

Terms 

Fax form 

Impressum Questionaire 

Top of Page 


Print version 

On this side you have the possibility to order further information, ask for an appointment or just tell us your opinion. 

Please complete the questionaire as detailed as possible. The more precisely you describe your wishes and requirements 

in the text field "comments", the quicker and better we can reply. 

Please send your current catalogue to me. 

Please send further information to me. 

Please call me for arranging for a personal meeting. 

First Name: Name:* 

Company: Position: 

Street: Country: 

PAC/City: Telefon: 

eMail:* Fax: 

Please, fill all marked fields (*) 

Newsletter 

additional details of your business requirements commments 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 



Contact 

Order 

Terms 

Fax form 

Impressum Order form 

Print version 

On this side you have the possibility to order online using a simple e-mail. Please complete the order form as detailed as 

possible. The more precisely you fill out all fields, the quicker and better we can deliver. 

Invoice adress 

Please fill out all fields 

Name: Name: 

Institute/Company: Institute/Company: 

Department: Department: 

Street: Street: 

City: City: 

Postal code & State: 

Postal code & State: 

Phone no: 

Fax no: 

your purchase order no: 

Shipping adress 

Please fill out if different from invoice adress 

e-mail: VAT (value added tax) identification no 

(for EEC members only): 

I order following products: 

Cat. # Description Pack size Quantity Price Euro 

additional details of your order ... 

For sending, please click for deleting, please click 

Please note that we can only accept orders which meets our terms & conditions! 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

Top of Page 


Print version 



Contact 

Order 

Terms 

Fax form 

Impressum Fax form 

Top of Page 


Dear customer, 

To release your fax order we offer following possibilities: 

download the fax form in PDF Format 

download the fax form in Rich Text Format 

download the fax form in Word Format 

Please click on the fax to expand and to print out directly! 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 

Print version 


G.Kisker GbR 


Fenster schließen 

Fenster schließen


Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 








Particles 





Print version 

Silica Particles 

These silica particles with a density of 2,0g/cm3 are simple to dispense and to separate. While polystyrene particles (d= 1,04) 

are difficult to separate by centrifugation with a lower size as 0,5 µ, silica particles do set down easy and are easy to 

resuspend. The silica particles are stabel in water and organic solvents, produced under a new dying method. Silica particles 

are easy to functionalize and available as fluorescent particles. They are useful for coupling of DNA, oligonucleotides, 

oligopeptides, proteines, lectines and antibodies.The refractive index of silica beads is 1,37 measured at 589 nm. 

The fluorescent silica-particles are also available with different functional groups as-NH2, and -COOH. 

Non fluorescent silica particles are also available with e.g.albumin, protein A, epoxy, NHS, NTA, EDTA and others. Please ask 

for quotation. 

Silica Particles, plain, are supplied in 5% suspension, exept PSi-0.03 to PSi-0.09 

Many Silica Particles are also available in powdered form on request. 

PLEASE NOTE: silica beads up to 1.5 µ are monodisperse and non porous, while bigger silica beads are porous and have a 

wider size distribution. Size distribution graphs are available on request. 

Cat. # Size/ quantity/concentration chemistry Price [USD] 

PSi-0.03 0,03µ/ 10ml/25mg/ml plain 395.00 









PSi-0.2 0.2µ/ 10ml/50mg/ml plain 168.17 



PSi-0.35 0,35µ/10ml/50mg/ml plain 168.17 






PSi-1.5 1,5µ 5ml/50mg/ml plain 135.17 


PSi-4.0 4.0µ 5ml/50mg/ml plain 144.14 






Silica Particles, NH2, supplied in 5% suspension, exept 0.03NH2 - 0.05NH2 - 

0.07NH2 - 0.1NH2 - 0.15NH2 

Cat. # Size/ quantity chemistry Price [USD] 

PSi-0.05NH2 0,05µ/ 5ml/25mg/ml NH2 246.40 

PSi-0.07NH2 0,07µ/ 5ml/25mg/ml NH2 174.25 

PSi-0.1NH2 0.1µ/ 5ml/25mg/ml NH2 118.75 

PSi-0.15NH2 0.15µ/ 10ml/25mg/ml NH2 232.23 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us

PSi-0.2NH2 0.2µ/ 5ml NH2 118.75 

PSi-0.25NH2 0.25µ/ 10 ml NH2 232.23 

PSi-0.3NH2 0.3µ/ 5ml NH2 137.74 

PSi-0.35NH2 0,35µ/ 5ml NH2 137.74 

PSi-0.4NH2 0.4µ/ 5ml NH2 137.74 

PSi-0.5NH2 0,5µ/ 5ml NH2 137.74 

PSi-0.8NH2 0,8µ/ 5ml NH2 155.68 

PSi-1.0NH2 1,0µ/ 5ml NH2 155.68 

PSi-1.5NH2 1,5µ/ 5ml NH2 155.68 

PSi-3.0NH2 3,0µ/ 5ml NH2 155.68 

PSi-4.0NH2 4.0µ/ 5ml NH2 155.68 

PSi-5.0NH2 5,0µ/ 5ml NH2 155.68 

PSi-10.0NH2 10.0µ/ 5ml NH2 172.48 

PSi-12.0NH2 12.0µ/ 5ml NH2 172.48 

PSi-20.0NH2 20,0µ/ 5ml NH2 172.48 

Silica Particles, COOH, supplied in 5% suspension, exept 0.03COOH - 0.05COOH - 

0.07COOH - 0.1COOH - 0.15COOH 


PSi-0.05COOH 0,05µ/ 10ml/25mg/ml COOH 369.60 




PSi-0.2COOH 0.2µ/ 10ml COOH 224.39 



PSi-0.35COOH 0,35µ/ 10ml COOH 224.39 













Silica Particles, Epoxy, supplied as powder due to reactivity of epoxy-groups 


PSi-0.3E 0.3µ/ 100 mg Epoxy 232.23 

PSi-0.4E 0.4µ/ 100 mg Epoxy 232.23 

PSi-0.5E 0,5µ/ 100 mg Epoxy 232.23 

PSi-0.8E 0,8µ/ 100 mg Epoxy 256.26 

PSi-1.0E 1,0µ/ 100 mg Epoxy 240.24 

PSi-1.5E 1,5µ/ 100 mg Epoxy 240.24 

PSi-3.0E 3,0µ/ 100 mg Epoxy 240.24 

PSi-4.0E 4.0µ/ 100 mg Epoxy 240.24 

PSi-5.0E 5,0µ/ 100 mg Epoxy 240.24 

PSi-10.0E 10.0µ/ 100 mg Epoxy 280.28 

PSi-12.0E 12.0µ/ 100 mg Epoxy 280.28

PSi-15.0E 15,0µ/ 100 mg Epoxy 280.28 

PSi-20.0E 20,0µ/ 100 mg Epoxy 280.28 

Silica Particles, Avidin coated, supplied in 2,5% suspension 


PSi-0.1 A 0,1µ/ 5ml Avidin coated 348.32 







PSi-3.0 A 3.0µ/ 5ml Avidin coated 382.48 







Silica Particles, Streptavidin coated, supplied in 2,5% suspension 


PSi-0.1 SA 0,1µ/ 1ml Streptavidin coated 366.77 







PSi-3.0 SA 3.0µ/ 1ml Streptavidin coated 339.58 







Silica Particles, Protein A coated, supplied in 2,5% suspension 


PSi-0.35 PA 0,35µ/ 1ml Protein A 252.26 





PSi-3.0 PA 3.0µ/ 1ml Protein A 277.08 




Silica Particles, plain, fluorescent-green, Excitation/Emmission: 485/510nm


PSi-G0.05 0,05µ/ 10ml/ 25mg/ml fluo-green 364.50 





PSI-G1.5 1,5µ/ 5ml/ 50mg/ml fluo-green 180.19 





Silica Particles, Amino modified, fluorescent-green, Excitation/Emmission: 

485/510nm 


PSi-G0.05NH2 0,05µ/ 10ml/ 25mg/ml fluo-green, amino 448.80 






PSI-G1.5NH2 1,5µ/ 10ml/ 50mg/ml fluo-green, amino 298.93 





Silica Particles, plain, fluorescent red, Excitation/Emmission: 569/585nm 


PSi-R0.05 0,05µ/ 10ml/ 25mg/ml fluo-red 364.50 

PSi-R0.07 0,07µ/ 10ml/ 25mg/ml fluo-red 364.50





PSI-R1.5 1,5µ/ 5ml/ 50mg/ml fluo-red 180.19 





Silica Particles, Amino modified, fluorescent red, Excitation/Emmission: 569/585nm 


PSi-R0.05NH2 0,05µ/ 5ml/ 25mg/ml fluo-red 457.00 






PSI-R1.5NH2 1,5µ/ 10ml/ 50mg/ml fluo-red 336.90 





Silica Particles, plain, fluorescent blue, Excitation/Emmission: 354/450 

Cat. # Size/ quantity/concentration Chemistry Price [USD] 

PSi-B0.05 0,05µ/ 10ml/ 25mg/ml fluo-blue 392.48 





PSI-B1.5 1,5µ/ 5ml/ 50mg/ml fluo-blue 255.02 



Nano-Glass Beads 

Nano-glas beads 

Cat. # size Pack size Price [USD] 

PBG-20/30 20 - 30nm 5g/ 48%in water 56.54

Hollow Glass Beads 

Here we offer hollow glass beads of different sizes. PGBH-11 and PGH-18 are made from boresilicat, non porous, chemical 

inert and appears as white powder. 

PGBH-10 is a hollow bead from FE-AL-Silica in a size under 10µ and appears as grey powder. 

Cat. # size/density Pack size Price [USD] 

PBGH-11 11µ/1,1g/cm3 5g 31.88 

PBGH-18 18µ/0,6g/cm3 5g 31.88 

PBGH-10 0,5-10µ/2,5g/cm3 10g 31.88 

Glass Beads 

This serie of glass beads is designed for applications where inorganic beads with high density are required. The glass beads 

are manufactured from high pure raw materials and have a pure and shining surface. The density is 2,5 g/cm3, chemical 

characterisation is 72% SiO2, 13% Na2O, 9% CaO. The glass beads are PbO free. The glass beads are mainly round above 

250 µ = 95%. For your convenience we have listed in the table the nominal number of beads/g. This number is a guideline 

only. 

special characteristics: 

homogenous and smooth surface 

no air-bubbles 

wide range of sizes 

free from foreign particles, glass fragments and other impurities. 

All beads are available in bulk. 

We also can offer on request Zirconium silicate (density 3,8g/cm3) and Zirconium silicate, Yttrium stabilized ( density 

6,0g/cm3). These beads are used as grinding media in pest control, cosmetics and pharmaceutical industry. 

Cat. # size Pack size / beads/g Price [USD] 

PGB-05 10 - 50µ 50g 2,4 x 10E7 32.67 

PGB-07 40 - 70µ 50g 7,0 x 10E6 32.67 

PGB-011 70-110µ 50g 1,0 x 10E6 32.67 

PGB-015 90-150µ 50g 7,0 x 10E5 32.67 

PGB-020 100-200µ 100g 2,8 x 10E5 32.67 

PGB-025 150-250µ 100g 6,2 x 10E4 32.67 

PGB-030 200-300µ 100g 95.000 32.67 

PGB-040 300-400µ 100g 21.000 32.67 

PGB-050 250-500µ 100g 14.500 32.67 

PGB-060 400-600µ 100g 6.000 44.21 

PGB-075 500-750µ 100g 3.100 44.21 

PGB-100 750-1.000µ 100g 1.500 44.21 

PGB-125 1.00-1.25 mm 100g 760 44.21 

PGB-155 1.25-1.55 mm 200g 220 26.59 

PGB-185 1.55-1.85 mm 200g 191 26.59 

PGB-200 1.70-2.00 mm 200g 95 26.59 

PGB-230 2.00-2.30 mm 200g 86 26.59 

PGB-260 2.30-2.60 mm 200g 48 26.59 

PGB-285 2.50-2.80 mm 200g 39 26.59 

PGB-330 2.85-3.30 mm 200g 28 26.59 

PGB-380 3.30-3.80 mm 200g 19 26.59 

PGB-430 3.80-4.30 mm 200g 12 26.59 

High Precision Glass Beads 

This serie of glass beads are made in high precision with diameter deviation of 20 nm only. They have an very high grade of 

roundness and are polished fine matt. 

The density is 2,5 g/cm3, chemical characterisation: soda lime glass 69.2% SiO2, 11.4% K2O, 6.85% Na2O, 5.98% BaO, 

2.45% CaO, 41% Al2O3, 9% CaO, 0.95 TiO2, 0.95 ZnO, 0,48% B2O3, 0.25%Sb2O3, 0,014%Fe2O3. For your convenience 

we have listed in the table the nominal number of beads/kg. This number is a guideline only. 

These beads are also available on request in Borosilicate glass and as solid colored glas transparent or opaque. 

All glas beads available in bulk. 

Cat. # size Pack size beads/kg Price [USD] 

PGBP-08 0,8 mm 500 beads 1.492.000 78.48 

PGBP-1 1,0 mm 500 beads 763.900 78.48

PGBP-1.588 1/16 inch 500 beads 190.800 78.48 

PGBP-2 2,0 mm 500 beads 78.48 


PGBP-3 3,0 mm 500 beads 28.300 88.09 


PGBP-4 4,0 mm 500 beads 12.300 88.09 


PGBP-5 5,0 mm 500 beads 6.100 94.49 


PGBP-6 6,0 mm 500 beads 94.49 


PGBP-7 7,0 mm 200 beads 2.220 78.48 


PGBP-8 8,0 mm 200 beads 1.490 110.51 


PGBP-9 9,0 mm 200 beads 1.040 110.51 

PGBP-9.525 3/8 inch 200 beads 880 110.51 

PGBP-10 10,0 mm 100 beads 76.88 


PGBP-11 11,0 mm 100 beads 91.29 


PGBP-12 12,0 mm 100 beads 120.12 


Gold Particles 

Our Gold Particles are of highest quality and can be used in production of diagnostic tests as well as 

conjugation studies of proteins and antibodies. The particles have a very narrow size distribution ( CV 

between 10% and 20% depending on size ) and are available from 2nm to 250nm. They are supplied 

in 100ml solution at optical density of 1.0, measured at 520nm. The number of particles/ml is given in 

the product/ordering table. The solutions are stabilized with HAuCL4. 

Prices of smaller or bigger quantities on request. 

Cat. # size particles/ml 

Price 

[USD] 

20 ml 

Price 

[USD] 

100 ml 

PGO-2 2nm 15,0 x 10 13 138.32 453.21 

PGO-5 5nm 5,0 x 10 13 138.32 453.21 

PGO-10 10nm 5,7 x 10 12 138.32 453.21 

PGO-15 15nm 1,4 x 10 12 138.32 453.21 

PGO-20 20nm 7,0 x 10 11 138.32 453.21 

PGO-30 30nm 2,0 x 10 11 138.32 453.21 

PGO-40 40nm 9,0 x 10 10 138.32 453.21 

PGO-50 50nm 4,5 x 10 10 138.32 453.21 

PGO-60 60nm 2,6 x 10 10 138.32 453.21 

PGO-80 80nm 1,1 x 10 10 138.32 453.21 

PGO-100 100nm 5,6 x 10 9 138.32 453.21 

PGO-150 150nm 1,7 x 10 9 138.32 453.21 

PGO-200 200nm 7,0 x 10 8 138.32 453.21 

PGO-250 250nm 3,6 x 10 8 138.32 453.21 

Biodegradable Microparticles 

It is necessary to use "biodegradable particles" in a lot applications. Our particles are made from 

polylactide with a denmsity of 1,02. They are supplied in 1% aqueous suspension (10 mg/ml) and are 

stable at neutral pH for at least 3 monthes. Degradation starts through basic or acid pH or enzymatic 

hydrolysis. The particles are available in a variety of sizes, chemistries and fluorescent colors. 

Cat. # size Pack size / beads/g Price [USD] 

PBD-0.25 0,25µ/ 10ml plain 223.00 

PBD-2.0 2,0µ/ 10ml plain 336.00 

PBD-20.0 20,0µ/ 10ml plain 197.00

Top of Page 


PBD-30.0 30,0µ/ 10ml plain 223.00 

PBD-100.0 100,0µ/ 10ml plain 223.00 

PBD-NH-0.25 0,25µ/ 10ml NH2 312.00 

PBD-NH-2.0 2,0µ/ 10ml NH2 616.00 

PBD-NH-20.0 20,0µ/ 10ml NH2 312.00 

PBD-NH-30.0 30,0µ/ 10ml NH2 312.00 

PBD-NH-100.0 100,0µ/ 10ml NH2 312.00 

PBD-CO-0.25 0,25µ/ 10ml COOH 312.00 

PBD-CO-2.0 2,0µ/ 10ml COOH 616.00 

PBD-CO-20.0 20,0µ/ 10ml COOH 312.00 

PBD-CO-30.0 30,0µ/ 10ml COOH 312.00 

PBD-CO-100.0 100,0µ/ 10ml COOH 312.00 

PBD-AG-30.0 30,0µ/ 1ml Collagen 576.00 

PBD-AG-100.0 100,0µ/ 1ml Collagen 576.00 

PBD-GF-0.25 0,25µ/ 5ml fluo-green 324.00 





PBD-RF-0.25 0,25µ/ 5ml fluo-red 324.00 





PBD-B-0.25 0,25µ/ 10ml blue 360.00 

PBD-B-2.0 2,0µ/ 10ml blue 499.00 

PBD-B-30.0 30,0µ/ 10ml blue 336.00 

PBD-B-100.0 100,0µ/ 10ml blue 360.00 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 








Particles 





Polystyrene microparticles 

These monodisperse polystyrene microparticles, also called Latex-microspheres, are 

used in a wide range of immunodiagnostic assays, as size-standards for calibration of 

equipment, in cellbiology applications etc. The physical adsorption of the polystyrene 

particles is used to bind ligands to the surface of the particles. 

Some polystyrene particles can be offered with special modifications e.g. acrylate, 

epoxy, NI-NTA, collagen or Au, please ask for quotation. 

Cat. # size/quantity/concentration chemistry Price [USD] 

PPs-0.015 0,015µ/ 10ml / 1,0% plain 271.70 

PPs-0.025 0,025µ/ 10ml / 1,0% plain 271.70 

PPs-0.05 0,05µ/ 15ml / 2,5% plain 69.00 

PPs-0.1 0,1µ/ 15ml / 2,5% plain 65.90 

PPs-0.2 0,2µ/ 15ml / 2,5% plain 65.90 

PPs-0.4 0,4µ/ 15ml / 2,5% plain 65.90 

PPs-0.6 0,6µ/ 15ml / 2,5% plain 65.90 

PPs-0.8 0,8µ/ 15ml / 2,5% plain 65.90 

PPs-1.0 1,0µ/ 15ml / 2,5% plain 79.90 

PPs-1.2 1,0-1,4µ/ 10ml / 5% plain 199.90 

PPs-1.2-B 1,0-1,4µ/ 100ml / 5% plain 1,175.90 

PPs-1.7 1,5-1,9µ/ 10ml / 5% plain 199.90 

PPs-1.7-B 1,5-1,9µ/ 100ml / 5% plain 1,175.90 

PPs-2.0 2,0µ/ 10ml / 2,5% plain 114.11 

PPs-2.2 2,0-2,4µ/ 10ml / 5% plain 219.90 

PPs-2.2-B 2,0-2,4µ/ 100ml / 5% plain 1,275.90 

PPs-2.7 2,5-2,9µ/ 10ml / 5% plain 225.90 

PPs-2.7-B 2,5-2,9µ/ 100ml / 5% plain 1,319.90 

PPs-3.0 3,0µ/ 10ml / 2,5% plain 136.99 

PPs-3.2 3,0-3,4µ/ 10ml / 5% plain 235.90 

PPs-3.2-B 3,0-3,4µ/ 100ml / 5% plain 1,375.90 

PPs-3.7 3,5-3,9µ/ 10ml / 5% plain 235.90 

PPs-3.7-B 3,5-3,9µ/ 100ml / 5% plain 1,375.90 

PPs-4.2 4,0-4,4µ/ 10ml / 5% plain 255.90 

PPs-4.2-B 4,0-4,4µ/ 100ml / 5% plain 1,525.90 

PPs-4.7 4,5-4,9µ/ 10ml / 5% plain 255.90 

PPs-4.7-B 4,5-4,9µ/ 100ml / 5% plain 1,525.90 

PPs-5.5 5,0-5,9µ/ 10ml / 5% plain 259.90 

PPs-5.5-B 5,0-5,9µ/ 100ml / 5% plain 1,568.90 

PPs-6.0 6,0µ/ 5ml / 2,5% plain 109.90 

PPs-7.0 7,0µ/ 5ml / 2,5% plain 118.90 

PPs-8.0 8,0µ/ 5ml / 2,5% plain 118.90 

PPs-10.0 10,0µ/ 5ml / 2,5% plain 149.90 

PPs-12.0 12,0µ/ 5ml / 2,5% plain 149.90 

PPs-15.0 15,0µ/ 5ml 2,5% plain 149.90 

PPs-20.0 20,0µ/ 10ml 2,5% plain 170.17 

PPs-25.0 25,0µ/ 10ml 2,5% plain 170.17 

PPs-30.0 30,0µ/ 5ml / 2,5% plain 170.17 


Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version

PPs-65.0 65,0µ/ 10ml / 2,5% plain 170.17 

Polystyrene microparticles, carboxylated 

Monodisperse polystyrene microparticles, which contain carboxyl groups at the 

surface. They are used for passive adsorption or covalent binding of proteins. 


PPs-0.15COOH 0,15µ/ 10ml / 1,0% COOH 313.17 







PPs-0.5COOH-B 0,5µ/ 100ml / 5,0% COOH 1.199.35 





PPs-1.2COOH 1,0-1.4µ/ 10ml / 5,0% COOH 219.50 

PPs-1.2COOH-B 1,0-1.4µ/ 100ml / 5,0% COOH 1.319.50 




















Polystyrene microparticles , amino modified 

Monodisperse polystyrene microparticles, which contain amino groups at the surface. 

They are used for covalent binding of proteins with the glutaraldehyde methode. 


PPs-0.2NH2 0,2µ/ 10ml / 2,5% NH2 159.00 

PPs-0.2NH2-B 0,2µ/ 100ml / 2,5% NH2 1.169.00

PPs-0.5NH2 0,5µ/ 10ml / 5,0% NH2 159.00 

PPs-0.5NH2-B 0,5µ/ 100ml / 5,0% NH2 1.169.00 

PPs-0.8NH2 0,8µ/ 10ml / 5,0% NH2 159.00 

PPs-0.8NH2-B 0,8µ/ 100ml / 5,0% NH2 1.169.00 

PPs-1.0NH2 1,0µ/ 10ml / 5,0% NH2 189.50 

PPs-1.0NH2-B 1,0µ/ 100ml / 5,0% NH2 1.319.50 

PPs-2.0NH2 2,0µ/ 10ml / 5,0% NH2 189.50 

PPs-2.0NH2-B 2,0µ/ 100ml / 5,0% NH2 1.419.50 

PPs-2.5NH2 2,5µ/ 10ml / 5,0% NH2 239.50 

PPs-2.5NH2-B 2,5µ/ 100ml / 5,0% NH2 1.495.35 

PPs-3.0NH2 3,0µ/ 10ml / 5,0% NH2 239.90 

PPs-3.0NH2-B 3,0µ/ 100ml / 5,0% NH2 1.495.35 

PPs-3.5NH2 3,5µ/ 10ml / 5,0% NH2 249.90 

PPs-3.5NH2-B 3,5µ/ 100ml / 5,0% NH2 1.495.35 

PPs-7.0NH2 6,0-7,9µ/ 10ml / 5,0% NH2 299.85 

PPs-7.0NH2-B 6,0-7,9µ/ 100ml / 5,0% NH2 1.950.85 

PPs-10.0NH2 10,0µ/ 10ml / 5,0% NH2 279.95 

PPs-12.0NH2 12,0µ/ 10ml / 5,0% NH2 279.95 

Powdered monodisperse Polystyrene size-particle-standards 

These particles have CV under 5% and can be used to check ot calibrate particelsize-systems. 

Cat. # size/quantity chemistry Price [USD] 

PPs-6.0P 6,0µ/ 1000mg plain 426.60 

PPs-8.0P 8,0µ/ 1000mg plain 426.60 

PPs-12.0P 12,0µ/ 1000mg plain 426.60 

PPs-20.0P 20,0µ/ 1000mg plain 426.60 

Polystyrene non-fluorescent colored microparticles 

These polystyrene microparticles are prepared by polymerizing non-fluorescent dye in the styrene. The particles are free of 

solvent commonly found when particles are prepared by staining with a solution of dye in inorganic solvent. The intensely 

colored particles enhance the visual detection in assays such as latex agglutination, dipstick and membrane based assays. 

The polystyrene particles are offered in 5% aqueous suspension, exept PPsB-7.0, which is 1% 

Cat. # size Quantity/Conc. chemistry Price [USD] 

PPsB-0.5 0,4-0,06µ 10ml/5%w/v plain 179.00 

PPsB-0.5-B 0,4-0,06µ 100ml/5%w/v plain 995.00 

PPsB-7.0 6,0-7.9µ 5ml/1%w/v plain 199.00 

PPsB-0.04COOH 0,03-0.06µ 10ml/5%w/v COOH 199.95 


PPsB-0.1COOH-B 0,1-0.19µ 100ml/5%w/v COOH 1,169.00 







Coated Polystyrene Particles 

The coated microparticles are prepared either by passive adsorption or covalent coupling depending upon the intended 

applications. The avidin and biotin coated particles are prepared by covalent coupling. Even through the 0,7 - 0,9µ Goat antimouse 

IgG coated polystyrene particles are prepared by using passive adsorption, the coated particles are stable for several

years under proper storage conditions. 

Some typical data for Avidin polystyrene particles (0,8µ) are: 

Covalently coated with egg white avidin, avidin content 14 µg/mg solid, 0.212 nmole/mg solid 

Binding capacity to Biotin-Fluorescein 0,46 nmole/mg solid 

Antibody coated polystyrene particles (0,8µ): 

Antibody contents 14µg/mg solid, 0,2µg/cm2, 1,5 x 10E4 IgG/particle, binding capacity to IgG-FITC 4µg/mg 

Cat. # Description Size µ / unit % w/v Price [USD] 

PC-Fc-0.8 Goat Anti-mouse IgG polystyrene,affin.pur., Fc specific 0,7-0,9/20ml 0,25 327.47 

PC-HL-0.8 Goat Anti-mouse IgG polystyrene,affin.pur., H"L 0,7-0,9/20ml 0,25 327.47 

PC-CAHL-0.8 Goat Anti-mouse IgG poly.,affin.pur./cross absorbed,H"L 0,7-0,9/20ml 0,25 356.07 

PC-CAR-0.8 Goat Anti-mouse IgG poly.,affin.pur./cross absorbed,H"L 0,7-0,9/20ml 0,25 356.07 

PC-Fc-3.0 Goat Anti-mouse IgG (Fc) polystyrene 3,0-3,9/ 5ml 0,5 390.53 

PC-Fc-6.0 Goat Anti-mouse IgG (Fc) polystyrene 6,0-8,0/ 5ml 0,5 390.53 

PCAH-HL-0.8 Goat Anti-Human IgG (H"L) polystyrene 0,7-0,9/ 5ml 0,25 213.07 



PC-A-0.7 Avidine-polystyrene 0,7-0,9/10ml 5 456.17 

PC-A-1.0 Avidine-polystyrene 1,0-1,4/10ml 5 456.17 

PC-A-3.0 Avidine-polystyrene 3,0-3,9/5ml 0,5 341.77 

PC-A-6.0 Avidine-polystyrene 6,0-8,0/ 5ml 0,5 341.77 

PC-S-0.3 Streptavidine-polystyrene 0,3-0,39/10ml 1 339.70 



PC-S-1.5 Streptavidine-polystyrene 1,5-1,9/ 5ml 1 356.07 

PC-S-2.0 Streptavidine-polystyrene 2,0-2,9/ 5ml 0,5 359.80 








PC-S-90.0 Streptavidine-polystyrene 80,0-95,0/ 4ml 1 578.50 

PC-B-0.8 Biotin-polystyrene 0,7-0,9/ 10ml 1 356.90 

PC-B-3.0 Biotin-polystyrene 3,0-3,9/ 5ml 0,5 368.40 

PC-B-6.0 Biotin-polystyrene 6,0-8,0/ 5ml 1 399.60 

PC-BX-6.0 Biotin-polystyrene, 0,5% DVB X-linked 6,0-8,0/ 5ml 1 419.80 

PC-BX-10.0 Biotin-polystyrene, 0,5% DVB X-linked 8,0-13,0/ 5ml 0,5 514.80 

PC-BX-15.0 Biotin-polystyrene, 0,5% DVB X-linked 13,0-18,0/ 5ml 0,5 592.60 

PC-PA-0.8 Protein A-polystyrene 0,7-0,9/5ml 1 243.10 

PC-PA-2.0 Protein A-polystyrene 2,0-2,9/5ml 0,5 243.10 



PC-PG-0.5 Protein G-polystyrene 0,4-0,6/5ml 1 284.57 

PC-PG-0.8 Protein G-polystyrene 0,7-0,9/5ml 1 284.57 

PC-PG-2.0 Protein G-polystyrene 2,0-2,9/5ml 0,5 284.57 




Coated Fluorescent Polystyrene Particles 


PC-AFY-0.5 Avidin yellow 0,4-0,6/ 5ml 0,1 227.37 

PC-AFP-0.5 Avidin pink 0,4-0,6/ 5ml 0,1 227.37 

PC-AFU-0.5 Avidin purple 0,4-0,6/ 5ml 0,1 227.37 

PC-AFY-0.8 Avidin yellow 0,7-0,9/ 5ml 0,1 227.37

PC-AFN-0.8 Avidin nile red 0,7-0,9/ 5ml 0,1 227.37 

PC-AFU-0.8 Avidin purple 0,7-0,9/ 5ml 0,1 227.37 

PC-AFY-2.0 Avidin yellow 1,7-2,2/ 5ml 0,1 284.57 


PC-AFSB-0.8 Avidin Sky Blue 0,7-0,9/ 5ml 0,1 227.37 

PC-AFITC-1.7 Avidin FITC 1,7-2,2/ 5ml 0,1 284.57 


PC-AM-FY-0.8 Anti mouse yellow IgG H"L 0,7-0,9/ 5ml 0,1 227.37 

PC-AM-FP-0.8 Anti mouse pink IgG H"L 0,7-0,9/ 5ml 0,1 227.37 

PC-AM-FU-0.8 Anti mouse purple IgG H"L 0,7-0,9/ 5ml 0,1 227.37 

PC-AM-FN-0.8 Anti mouse nile red IgG H"L 0,7-0,9/ 5ml 0,1 227.37 

PC-AM-FY-1.7 Anti mouse yellow IgG H"L 1,7-2,2/ 5ml 0,1 227.37 

PC-AM-FP-1.7 Anti mouse pink IgG H"L 1,7-2,2/ 5ml 0,1 227.37 

PC-AM-FU-1.7 Anti mouse purple IgG H"L 1,7-2,2/ 5ml 0,1 227.37 

PC-AM-FN-1.7 Anti mouse nile red IgG H"L 1,7-2,2/ 5ml 0,1 227.37 

PC-AM-FcFY-2.5 Anti mouse yellow IgG (FC) 2,5-4,5/ 5ml 0,1 313.17 

PC-AM-FcFP-2.5 Anti mouse pink IgG (Fc) 2,5-4,5/ 5ml 0,1 313.17 

PC-AM-FcFN-2.5 Anti mouse niole red IgG (Fc) 2,5-4,5/ 5ml 0,1 313.17 

PC-BFY-0.5 Biotin yellow 0,4-0,6/ 5ml 0,1 227.37 

PC-BFN-0.5 Biotin nile red 0,4-0,6/ 5ml 0,1 227.37 

PC-BFP-0.8 Biotin pink 0,7-0,9/ 5ml 0,1 227.37 


PC-BFB-3.0 Biotin blue 3,0-3,9/ 5ml 0,1 284.57 


PC-BFY-7.0 Biotin yellow 7,0-7,9/ 5ml 0,1 348.92 

PC-BFN-7.0 Biotin nile red 7,0-7,9/ 5ml 0,1 348.92 

PC-BFB-7.0 Biotin blue 7,0-7,9/ 5ml 0,1 348.92 

PC-PAFY-0.5 Protein A yellow 0,4-0,6/ 5ml 0,1 284.57 

PC-PAFN-0.5 Protein A red 0,4-0,6/ 5ml 0,1 284.57 

PC-PAFP-0.5 Protein A pink 0,4-0,6/ 5ml 0,1 284.57 

Available Data Sheets on Request: 

1. Particle coating procedures 

2. Determination of Antibody binding to Particles 

Fluorescent Polystyrene Particles 

The Fluorescent Particles are prepared by either staining the Polystyrene with the fluorophore or by polymerizing the 

fluorophore in styrene in the presence of polystyrene particles. A wide varity of fluorescent particles can be prepared ranging 

in size, type of fluorophore, fluorecent intensity and surface functional groups. Most of the used fluorophores are 

waterinsoluble and therefore very stable. These fluorophores incorporated into the particles do not leach and their color and 

fluorescence remains stable for a long time under proper storage conditions. 

The exicitation and emmission data of the fluorecent particles in aqueous solution are shown in the figure. The particles are 

monodisperse, the stated diameters are nominal, the actual diameter is stated on each bottle. 

Fluorescent Data: 

Ex/Em max (nm) Particle type EX(nm) filter EM(nm) filter Compatible fluorophores 

390/450 Light yellow 360 – 390 450 Hoechst 33342, 33258 

470/480 Yellow 470 – 490 520 FITC 

525/560 Nile red 488 – 540 560 R-phycoerythrin, Propidium Iodide 

570/590 Pink 550 – 570 580 Propidium iodide 

590-620 Purple 590 620 Texas red 

620/650 Nile blue 632 – 635 650 Allophycocyanin, Cy5 

680/710 Sky blue 632 - 670 700 Cy5, Cy7, IR123 

Multi-Fluo 360 – 635 400 – 680 Contains multiple fluorophores 

FITC Polystyrene Particles for Flow cytometry 

The FITC labeled polystyrene particles can be used as calibration particles for flow cytometry. They can also be used to cross

calibrate different flow cytometers so that data can be normalized. 

Please note, that the size ranges stated below are nominal, the actual size of these monodisperse particles is stated on each 

bottle. 

Cat. # Type " Color Size in µ % w/v packsize Price [USD] 

PFITC-0.8 FITC 0,7 –0,9 0,1 2ml 209.50 

PFITC-2.0 FITC 2,0 - 2,9 0,1 2ml 209.50 

PFITC-3.0 FITC 3,0 – 3,9 0,1 2ml 219.40 

PFITC-5.0 FITC 5,0 – 5,9 0,1 2ml 239.40 

PFITC-7.0 FITC 7,0 – 7,9 0,1 2ml 266.00 

PFITC-8.0 FITC 8,0 – 8,9 0,1 2ml 266.00 

Flow Cytometry Calibration Particles 

Easy Calibration Fluorescent Particles 

The Easy Calibartion Fluorescent particles are usewd to detect changes within the flow cytometer 

such as contaminats or pH changes. 

The beads consits of a mixture of particles with intensities calibrated in terms of "Molecules of 

Equivalent Fluorochrome" (MEF) units.They are offered with three different fluorochromes including 

FITC,PE and PE-Cy-5. 

Since each Easy Calibration Fluorescent Particle population is assigned a MEF unit, linearity 

calibrations and quantitative determinations can be performed. A linearity calibrations is performed by 

graphing each population´s channel number against it assigned MEF value. As a result, a regression 

line is created. This line can be used to track the performancy history of the instrument. 

Cat. # Easy Calibration particles Size µ / unit Beads Price [USD] 

ECFP-F1-5K FITC 5 peaks 3,0-3,4/ 5x1ml 2x10E6 / ml 367.51 

ECFP-F2-5K PE 5 peaks 3,0-3,4/ 5x1ml 2x10E6 / ml 367.51 

ECFP-F4-5K PE-Cy-5 5 peaks 3,0-3,4/ 5x1ml 2x10E6 / ml 367.51 

Ultra Rainbow Calibration Particles 

A new type of Calibration Particles is now available for performance tracking of flow cytometers (e.g. 

BD FC-500, Partec, LSR Ia " II, Canto) with fluorescet channels in the Far Red. They are available in 

3.8 µ or 5.05 µ. The Ultra Rainbow Calibration Particles have improved resolution in the PE-Cy7, APC 

and APC-Cy7 channels. These particles are supplied as a kit with 3 ml of blank particles and 2 ml of 

fluorescent particles. 

The histograms showing individual peaks of cat.# P-URCP-3.8 

Cat. # Rainbow Calibration particles Size µ / unit Beads Price [USD] 

P-URCP-3.8 6 peaks 3,5-3,9/ 2ml 10E7 / ml 378.95 

P-URCP-5.0 6 peaks 5,0-5,9/ 2ml 10E7 / ml 393.25 

Rainbow Calibration Particles 

Our calibration particles are designed for routine calibration of flow cytometers and are used extensivly for QC and long term 

performance tracking of flow cytometers. They can also be used for routine alignment and calibration in fluorescence and 

confocal fluorescence microscopy. All calibration particles are supplied in dropper bottles containing 5 x10 6 particles. 

Rainbow Calibration Particles are a mixture of fluorophores that allows exitation at any wavelength from 365 to 650nm. 

It enables calibration of all channels of the flow cytometer with same set of particles in similiar size, but with different 

intensities. 

Rainbow Fluorescent Particles are similiar to the above described, exept these represent single peak, uniform size 

particles. The Rainbow fluorescent Particles are usually the brightest peak of the corresponding Calibration Particles with the 

exeption of P-RFPM-3.0, which has fluorescent intensity of the stained cells. Since these particles contain single peak with 

very small flluorescence and size CV, they are very useful in the alignment of the optical system of the flow cytometer. 

Yellow Calibration Particles are designed for routine calibration of the fluorescin channel. They contain a set of similiar 

size Yellow Particles with different fluorescence intensities. 

Rainbow Linear Calibration Particles are designed to check the linearity of the PMT in the linear scale of all available 

channels.They are also useful for quantifying the DNA content of cells stained with Hoechst dye, DAPI, Ethidium bromide, 

Propidium bromide, YOYO or TOTO. 

Allophycocyanin Calibration Particles contain a mixture of 3.0µ fluorescent particles with different intensity in 

Allophycocyanin channel and can be exited with either a He-Ne laser at 632 nm or a diode laser at 635nm. 

Blank Calibration Particles are the blank peak of the corresponding Rainbow Calibration Particles. These particles can 

be used to set the threshold of the instrument in each channel. 

Cat. # Rainbow Calibration particles Size µ / unit Price [USD] 

P-RCP-2.0 4 peaks 1,8-2,2/ 5ml 364.65 

P-RCP-3.0 6 peaks 3,0-3,4/ 5ml 364.65 

P-RCP8-3.0 8 peaks 3,0-3,4/ 5ml 300.30 

P-RCP-3.5 4 peaks 3,5-4,0/ 5ml 428.79

P-RCP-6.0 6 peaks 6,0-6,5/ 5ml 378.95 

Rainbow Fluorescent particles 

P-RFP-2.0 Brightest peak in P-RCP-2.0 1,8-2,2/ 5ml 380.17 


P-RFPM-3.0 Mid range FL1 fluorescence 3,0-3,4/ 5ml 413.06 




P-YCP-7.0 Yellow Calibration particles, 5 peaks 6,5-8.0/ 5ml 451.31 

P-RLCP-3.0 Rainbow Linear Calibration particles, 5 peaks 3,0-3,4/ 5ml 427.86 

P-ACP-3.0 Allophycocyanin Calibration particles 3,0-3,4/ 2x5ml 428.79 

Blank Calibration particles 

P-BCP-2.0 Blank Peak in P-RCP-2.0 1,8-2,2/ 5ml 218.58 





Available Data Sheets regarding Flow Cytometry on Request. 

1. Calibration and performance tracking of Flow Cytometer using Calibration Particles 

2. Measuring Molecules of Equivalent Fluorescin ( MEFL ), PE ( MEPE ) and RPE-CY5 (MEPCY ) using Rainbow Calibration 

Particles. 

Fluorescent Particle Kits 

The Pink Fluorescent Particle Kits consist of either 3.6µ or 2,8µ Fluorescent Particles with twelve different fluorescence 

intensities in PE channel. They are designed to simplify the multiplex assay development using any flow cytometer. Low cost 

FITC conjugates can be used for detection. They are supplied as kits of either six odd numbered peaks or six even numbered 

peaks. Four different Pink Fluorescent Particle Kits are available for different applications. 

The Yellow Fluorescent Particle Kits consist of 2,8µ and 3,6µ Yellow Fluorescent Particles in multiple fluorescence intensities 

in FITC channels. These two kits can be used to develop multiplex assays using either PE or PE-Cy5 tracers for detection. 

Cat. # Description % w/v / pack size Price [USD] 

P-PO3.6Kit Pink-odd 6 peaks, 3,6µ 0,5% / 6 x 1ml 818.82 

P-PE3.6Kit Pink even 6 peaks, 3,6µ 0,5% / 6 x 1ml 818.82 

P-GAMPO3.6Kit Goat-anti-Mouse Pink-odd 6 peaks, 3,6µ 0,1% / 6 x 1ml 818.82 

P-GAMPE3.6Kit Goat-anti-Mouse Pink-even 6 peaks, 3,6µ 0,1% / 6 x 1ml 818.82 

P-CPO2.8Kit Carboxyl Pink-odd 6 peaks, 2,8µ 0,25% / 6 x 1ml 818.82 

P-CPE2.8Kit Carboxyl Pink-even 6 peaks, 2,8µ 0,25% / 6 x 1ml 818.82 

P-S-AO2.8Kit S-Avidin Pink-odd 6 peaks, 2,8µ 0,1% / 6 x 1ml 818.82 

P-S-AE2.8Kit S-Avidin Pink-odd 6 peaks, 2,8µ 0,1% / 6 x 1 ml 818.82 

P-YO2.8Kit Yellow-odd 6 peaks, 2,8µ 0,5% / 6 x 1 ml 818.82 

P-YE2.8Kit Yellow-even 6 peaks, 2,8µ 0,5% / 6 x 1ml 818.82 

P-Y9-2.8Kit Yellow 9 peaks, 3,6µ 0,5% / 6 x 1ml 1,019.88 


Cat. # Type & Color Size in µ % w/v packsize Price [USD] 

PFP-00552 Yellow 0,04 –0,06 1 2ml 198.77 

PFP-0252 Yellow 0,1 – 0,3 1 2ml 198.77 

PFP-0245 Light yellow 0,1 – 0,3 1 2ml 198.77 

PFP-0552 Yellow 0,4 – 0,6 1 2ml 198.77 


PFP-0852 Yellow 0,7 – 0,9 1 2ml 198.77 


PFL-2045 Light yellow, low intensity 1,7 – 2,2 1 2ml 227.37 

PFP-2045 Light yellow, medium intensity 1,7 – 2,2 1 2ml 227.37 

PFH-2045 Light yellow, high intensity 1,7 – 2,2 1 2ml 227.37 

PFL-2052 Yellow, low intensity 1,7 – 2,2 1 2ml 227.37 

PFH-2052 Yellow, high intensity 1,7 – 2,2 1 2ml 227.37

PFP-3052 Yellow 2,5 – 3,4 1 2ml 255.97 

PFP-4052 Yellow 3,5 – 4,5 1 2ml 255.97 

PFP-6052 Yellow 6,0 – 7,9 1 2ml 274.56 

PFP-10052 Yellow 10,0 – 14,0 1 2ml 336.05 

PFP-15052 Yellow 15,0 – 19,0 1 2ml 370.37 

PCFP-00546 Light yellow carboxylated 0,04 – 0,08 1 2ml 255.97 

PCFP-00552 Yellow carboxylated 0,04 – 0,08 1 2ml 255.97 




PCFL-0852 Yellow carboxylated, low intensity 0,7 – 0,9 1 2ml 255.97 


PCFH-5052 Yellow carboxylated, high intensity 5,0 – 5,9 0,5 2ml 274.56 

PCFP-5052 Yellow carbox., medium intensity 5,0 – 5,9 0,5 2ml 274.56 

PCFL-5052 Yellow carboxylated, low intensity 5,0 – 5,9 0,5 2ml 274.56 

PAFP-0252 Yellow amino 0,09 – 0,3 1 2ml 255.97 




PFP-00556 Nile red 0,04 –0,06 1 2ml 198.77 

PFP-0256 Nile red 0,1 – 0,3 1 2ml 198.77 

PFP-0856 Nile red 0,7 – 0,9 1 2ml 198.77 

PFL-2056 Nile red, low intensity 1,7 – 2,2 1 2ml 227.37 

PFH-2056 Nile red, high intensity 1,7 – 2,2 1 2ml 227.37 

PFP-2056 Nile red 1,7 – 2,2 1 2ml 227.37 

PFP-3056 Nile red 2,5 – 3,4 1 2ml 255.97 

PFP-4056 Nile red 3,5 – 4,5 1 2ml 255.97 

PFP-6056 Nile red 6,0 – 7,9 1 2ml 274.56 

PFL-6056 Nile red, low intensity 6,0 – 7,9 1 2ml 274.56 

PFP-9056 Nile red 8,0 - 9,9 1 2ml 370.37 

PFH-10056 Nile red, high intensity 10,0 – 14,0 1 2ml 336.05 

PFP-10056 Nile red 10,0 – 14,0 1 2ml 336.05 

PFP-15056 Nile red 15,0 – 19,0 1 2ml 370.37 

PCFP-00556 Nile red carboxylated 0,04 – 0,08 1 2ml 270.27 




PCFH-5056 Nile red carbox., high intensity 5,0 – 5,9 0,5 2ml 284.57 

PCFP-5056 Nile red carbox., medium intensity 5,0 – 5,9 0,5 2ml 284.57 


PFP-00558 Pink 0,04 –0,06 1 2ml 198.77 

PFP-0558 Pink 0,4 – 0,6 1 2ml 198.77 

PFP-0858 Pink 0,7 – 0,9 1 2ml 198.77 

PFP-2058 Pink 1,7 – 2,2 1 2ml 227.37 

PFP-4058 Pink 2,5 – 4,5 1 2ml 255.97 

PFP-6058 Pink 6,0 – 7,9 1 2ml 274.56 

PCFP-00558 Pink carboxylated 0,04 – 0,08 1 2ml 255.97 


PCFP-0858 Pink carboxylated 0,7 – 0,9 1 2ml 255.97


PCFH-5058 Pink carbox., high intensity 5,0 – 5,9 0,5 2ml 274.56 

PCFP-5058 Pink carbox., medium intensity 5,0 – 5,9 0,5 2ml 274.56 

PCFL-5058 Pink carbox., low intensity 5,0 – 5,9 0,5 2ml 274.56 


PFP-00562 Purple 0,04 –0,06 1 2ml 198.77 

PFP-0262 Purple 0,1-0,3 1 2ml 198.77 

PFP-0562 Purple 0,4 – 0,6 1 2ml 198.77 

PFP-0862 Purple 0,7 – 0,9 1 2ml 198.77 

PFL-2062 Purple, low intensity 1,7 – 2,2 1 2ml 227.37 

PFP-2062 Purple, medium intensity 1,7 – 2,2 1 2ml 227.37 

PFH-2062 Purple, high intensity 1,7 – 2,2 1 2ml 227.37 

PFP-4062 Purple 2,5 – 4,5 1 2ml 255.97 

PCFP-0562 Purple carboxylated 0,4 – 0,6 1 2ml 255.97 




PFP-00570 Sky blue 0,04 –0,06 0,25 2ml 198.77 

PFP-0270 Sky blue 0,1-0,3 0,25 2ml 198.77 

PFP-0570 Sky blue 0,4 – 0,6 1,0 2ml 198.77 

PFP-0870 Sky blue 0,7 – 0,9 1 2ml 198.77 

PFP-2070 Sky blue 1,7 – 2,2 1 2ml 227.37 

PFH-2070 Sky blue, high intensity 1,7 – 2,2 0,2 2ml 227.37 

PFP-3070 Sky blue 2,5 – 3,4 0,2 2ml 255.97 

PFP-4070 Sky blue 3,5 – 4,5 0,2 2ml 255.97 

PFL-4070 Sky blue, low intensity 2,5 – 4,5 1,0 2ml 255.97 

PFP-15070 Sky blue 15,0-19,0 0,2 2ml 370.37 

PCFP-0570 Sky blue carboxylated 0,4 – 0,6 0,25 2ml 255.97 

PCFP-0870 Sky blue carboxylated 0,7 – 0,9 1 2ml 255.97 

These particles can also be offered as 10% suspension, when higher concentrations for production are 

necessarry. 

Also available carboxylated in 10% suspension, Please ask for quotation. 

PMMA ( Pylymethylmethacrylate ) Particles, supplied in 10% suspension 

These beads have a typical wider size distribution for bigger sized beads 

Cat.# size/quantity chemistry Price [USD] 

PPMMA-10.0 10,0µ/ 15ml plain 486.20 



PPMMa-100.0 100,0µ/ 15ml plain 647.08 

Large Size Particles 

In the following chapter we offer some beads of larger sizes but with relative narrow size distribution. The offered quantities 

are laboratory quantities and all beads can be offered as bulk quantities also. The beads are used for different applications, e. 

g. manufacturing of implatates( pmma-beads and pharmaceutical synthetic research (polystyrene beads). 

Cat. # size material quantity Price [USD] 

PLPS-15 13 -18µ Polystyrene, crosslinked 10 ml/2.5% 343.17 

PLPS-27 24 - 30µ Polystyrene, crosslinked 10 ml/2.5% 467.57 



PLPS-100 90 -105µ Polystyrene, crosslinked 10 ml/5.0% 261.67 

PLPS-135 125 -149µ Polystyrene, crosslinked 10 ml/5.0% 261.67


PLPM-300 200 - 400µ PMMA 10g 45.47 

PLPM-400 400 - 500µ PMMA 10g 45.47 

PLPM-600 500 - 600 µ PMMA 10g 45.47 

PLPM-800 700 - 1000µ PMMA 10g 45.47 

Melamine Microparticles - powdered 

The melamine microparticles ( polymethylenemelamine particles) are made from crosslinked melamine and have some 

advantages depending on the application compared to polystyrene particles. They have a higher density ( 1,51g/cm3), are 

very stable, can be stored unlimited, can be resuspended in water, they do not quench in most organic solvents and are heat 

resistant up to 200°C. The melamine microparticles are hydrophilic and monodisperse in water (CV 1-2%). The refractive 

index is 1,68. 


PMa-1.0 1,0µ/ 750mg 489.30 

1,0µ/ 1,5g 873.85 

PMa-2.0 2,0µ/ 750mg 489.30 

2,0µ/ 1,5g 873.85 

PMa-3.0 3,0µ/ 750mg 489.30 

3,0µ/ 1,5g 873.85 

PMa-4.0 4,0µ/ 750mg 489.30 

4,0µ/ 1,5g 873.85 

PMa-5.0 5,0µ/ 750mg 615.07 

5,0µ/1,5g 984.39 

PMa-6.0 6,0µ/ 750mg 615.07 

6,0µ/ 1,5g 984.39 

PMa-7.0 7,0µ/ 750mg 615.07 

7,0µ/ 1,5g 984.39 

PMa-8.0 8,0µ/ 750mg 615.07 

8,0µ/ 1,5g 984.39 

PMa-9.0 9,0µ/ 750mg 615.07 

9,0µ/ 1,5g 984.39 

PMa-10.0 10,0µ/ 750mg 675.10 

10,0µ/ 1,5g 999.39 

Fluorescent Melamine Microparticles 

These fluorescent microparticles have same basic characteristics as the powdered melamine microparticles. They are useful 

e.g. in diagnostic assays, protein binding procedures, size standards in microscopy applications as tracers and indicators, 

wherever a single particel must be identified in mixt medium. All fluorescent microparticles are supplied as 2,5% aqueous 

suspension. We offer a wide range of sizes with differnt fluorescent dyes. 

FITC particles: Excitation 490nm; Emmission 525nm 

Rhodamine B: Excitation 540nmn; Emmission 625nm 

Nil blue: Excitation 633nm,; Emmission 672 

Additional available microspheres are: Acridine orange and Ethidium bromide marked microspheres, please ask for available 

size and price. 

Cat. # Size/ quantity dye Price [USD] 

PMaF-1.0 1,0µ/ 5ml FITC 552,65/5ml…989,77/15ml 

PMaRhB-1.0 1,0µ/ 5ml Rhodamine B 552,65/5ml…989,77/15ml 

PMaNB-1.0 1,0µ/ 5ml Nile blue 552,65/5ml…989,77/15ml 







PMaF-4.0 4,0µ/ 5ml FITC 552,65/5ml…989,77/15ml



PMaF-5.0 5,0µ/ 5ml FITC 624,76/5ml 997,84/15ml 

PMaRhB-5.0 5,0µ/ 5ml Rhodamine B 624,76/5ml 997,84/15ml 

PMaNB-5.0 5,0µ/ 5ml Nile blue 624,76/5ml 997,84/15ml 


PMaRhb-6.0 6,0µ/ 5ml Rhodamine B 624,76/5ml 997,84/15ml 








NIST Certified Particles 

Our Particle size standards are made from Polystyrene (Ps) or crosslinked Melamin (Mf) . We offer this superior grade of 

particles in the widest range from 0,1µ to 15µ of certified particles available today. Each lot of the NIST Certified Particles is 

characterized by documented methods, based on the NIST (National Institute of Standards and Technology) and. CRB ( 

Community Bureau of Reference ) as TEM, REM and Coulter Counter. 

For each particle size standard we supply a certificate of analysis, which documents the most important characteristics and 

physical data like number of particles, particle size, standard deviation ( SD ), Coefficient of Variance ( CV ), specific weight, 

refractive index, bead density and more. 

The particle size standards are supplied as 2% or 3% suspension in deionized water. The CV is 

depending on each size at 1 - 3,5% 

Further intermediate sizes are available on requets. 

Cat. #. Size /quantity/concentration material Price [USD] 

PNPs-0.1 0,1µ/10ml/2% Ps 399.30 

PNPs-0.18 0,18µ/20ml/2% Ps 568.30 

PNPs-0.25 0,25µ/20ml/2% Ps 568.30 

PNPs-0.3 0,3µ/20ml/2% Ps 568.30 

PNPs-0.4 0,4µ/20ml/2% Ps 568.30 

PNPs-0.5 0,5µ/10ml/2% Ps 399.30 

PNPs-0.7 0,7µ/20ml/2% Ps 568.30 

PNPs-1.0 1,0µ/10ml/2% Ps 559.30 

PNPs-1.5 1,5µ/10ml/2% Ps 559.30 

PNMf-2.0 2,0µ/10ml/2% Mf 559.30 

PNMf-2.5 2,5µ/10ml/2% Mf 559.30 

PNMf-3.0 3,0µ/10ml/2% Mf 559.30 

PNMf-3.5 3,5µ/10ml/2% Mf 559.30 

PNMf-4.0 4,0µ/10ml/2% Mf 559.30 

PNPs-4.0 4,0µ/10ml/2% Ps 559.30 

PNMf-4.5 4,5µ/10ml/2% Mf 559.30 

PNMf-5.0 5,0µ/10ml/2% Mf 559.30 

PNMf-5.5 5,5µ/10ml/2% Mf 559.30 

PNMf-6.0 6,0µ/10ml/2% Mf 559.30 

PNMf-7.0 7,0µ/10ml/2% Mf 559.30 

PNMf-8.0 8,0µ/10ml/2% Mf 559.30 

PNMf-9.0 9,0µ/10ml/2% Mf 559.30 

PNMf-10.0 10,0µ/10ml/2% Mf 559.30 

PNPs-10.0 10,0µ/20ml/3% Ps 659.30 

PNPs-15.0 15,0µ/20ml/3% Ps 659.30

Top of Page 


PNPs-20.0 20,0µ/20ml/3% Ps 659.30 

PNPs-40.0 40,0µ/20ml/3% Ps 659.30 

PNPs-50.0 50,0µ/20ml/3% Ps 659.30 

PNPs-75.0 75,0µ/20ml/3% Ps 659.30 

Print version 



Filter Tips 

Pipet Tips 




Rack Systems 

Cryoproducts 



Documentation 








Particles 






Toll-Free: (877) 736-3439 

Fax: (604) 736-3479 

Email Us 

Print version 

Coated Polystyrene Magnetic Particles 

These magnetic particles are prepared by coating a layer of iron oxid and polystyrene onto the core of the particles. They are 

relativly uniform in size, spherical in shape and paramagnetic in nature. The paramagnetic nature of the particles allows them 

to be separated by using a magnet but the particles will resuspend easily when removed from the magnet. They will not 

retain any significant magnetism even after repeat exposure to strong magnetic field. 

Smooth surface particleshave an additional layer of polymer coating on the surface, to cover the iron oxide coating, so iron 

oxide is not on the surface of a bead. The smooth particles are useful in applications, where iron oxide may interfer with 

e.g.enzymatic activities. 

These magnetic particles can be used for cell separation, affinity purification, DNA probe assays, magnetic particle EIA etc. 

The coated magnetic particles are prepared by covalent coupling, concentration is around 2 x 108 particles/ml, 0,02% sodium 

azide added.. 

The Particles are supplied monodisperse in the described range, the actual size is depending on current lot.nr. 


PMAv-1 Magnet Particles Avidin coated 1,0-1,9µ/ 10 ml 0,5% 295.00 


PMAv-4 Magnet Particles Avidin coated 4,0-4,5µ/ 100 ml 1,0% 1,890.00 


PMAv-6 Magnet Particles Avidin coated 6,0-8,0µ/ 100 ml 1,0% 2,490.50 


PMAv-3-S Magnet Particles Avidin coated, smooth surface 3,0-3,9µ/ 10 ml 1,0% 315.00 

PMAv-4-S Magnet Particles Avidin coated, smooth surface 4,0-4,5µ/ 10 ml 1,0% 315.00 

PMAv-1-2G Magnet Particles Avidin coated, non uniform granules 1-1µ/ 10 ml 0,5% 229.00 

PMSt-0.6 Magnet Particles Streptavidin coated 0,5-0.69µ/ 10 ml 0,5% 299.85 

PMSt-0.7 Magnet Particles Streptavidin coated 0,7-0,9µ/ 10 ml 0,5% 299.85 




PMSt-3 Magnet Particles Streptavidin coated 3,0-3,9µ/ 10 ml 1,0% 365.80 





PMSt-40 Magnet Particles Streptavidin coated 38-44µ/ 4 ml 0,5% 595.70 

PMSt-3-S Magnet Particles Streptavidin coated, smooth surface 3,0-3,9µ/ 10 ml 1,0% 395.80 

PMSt-4-S Magnet Particles Streptavidin coated, smooth surface 4,0-4,5µ/ 10 ml 1,0% 395.80 

PMGAM-4 Mag. Part. Goat anti-mouse IgG (Affinity purified, H & L) 4,0-4,5µ/ 10 ml 1,0% 378.90 

PMAMC-4 Mag Part. Goat anti-mouse IgG (Aff. purif. & cross ads.H&L) 4,0-4,5µ/ 10 ml 1,0% 399.09 

PMGAR-4 Magnet Part. Goat ant-rabbit IgG ( H & L ) 4,0-4-5µ/ 10 ml 1,0% 378.90 

PMGAH-4 Mag. Part. Goat anti Human IgG ( Fc ) 4,0-4,5µ/ 10 ml 1,0% 378.90 

PMB-1 Magnet Part. Biotin covalently coupled to BSA coated Mag.Part. 1,0-1,9µ/ 10 ml 0,5% 229.85 



PMB-1-2G Magnet Particles Biotin coated, non uniform granules 6,0-7,9µ/ 10 ml 0,5% 265.00 

PMPrG-3-S Magnet Particles Protein G coated, smooth surface 3,0-3,9µ/ 2ml 1,0% 358.70 

PMPrG-4 Magnet Particles Protein G coated 4,0-4,5µ/ 2ml 1,0% 335.00 

PMPrG-4-S Magnet Particles Protein G coated, smooth surface 4,0-4,5µ/ 2ml 1,0% 358.70 

PMPrA-3-S Magnet Particles Protein A coated, smooth surface 3,0-3,9µ/ 5 ml 1,0% 310.00 

PMPrA-4 Magnet Particles Protein A coated 4,0-4,5µ/ 5 ml 1,0% 289.00

PMPrA-4-S Magnet Particles Protein A coated, smooth surface 4,0-4,5µ/ 5 ml 1,0% 310.00 

Available Data sheets: Binding capacity of 1. Avidin Mag.Part/ 2.GaM Mag.Part./ 3.Streptavidin Mag.Part./ 4.Biotin 

Mag.Part. 

5. Separation of mononuclear cells from peripheral blood using GaM IgG magnetic particles 

6. Magnetic particles coated with Pepsin, Papain and Trypsin 7. Protein A coated magnetic particles 

Magnetizable Nanoparticles and magnetizable microparticles, Dextran based 

The superparamagnetic nanoparticles on basis of Dextran with a size of 0,25µ have a 

magnetitcontent of 90%. While 130nm and 250nm particles can be separated easy by a permanent 

magnet, 50nm and 100nm particles can due to their small size only be seoarated by a "High 

Gradient magnetic Field" device ( HGMF ). They are supplied as aqueous solution in a 

concentration of 25mg/ml as plain and 10m 

Cat. # Size/quantity chemistry/concentr. Price [USD] 

PMP-20 0,02µ/ 5 ml plain/ 10mg/ml 278.85 





PMN-20 0,02µ/ 5 ml -NH2- / 5mg/ml 394.65 

PMN-50 0,05µ/ 5 ml -NH2- / 5mg/ml 359.75 

PMN-100 0,10µ/ 5 ml -NH2- / 5mg/ml 359.75 

PMN-130 0,13µ/ 5 ml -NH2- / 10mg/ml 249.35 

PMN-250 0,25µ/ 5 ml -NH2- / 10mg/ml 239.40 

PMC-20 0,02µ/ 5 ml -COOH- / 5mg/ml 336.05 





PMAV-50 0,05µ/ 5 ml Avidin / 2,5mg/ml 371.10 

PMAV-100 0,1µ/ 5 ml Avidin / 2,5mg/ml 371.10 

PMAV-130 0,13µ/ 5 ml Avidin / 10mg/ml 348.50 



PMSA-20 0,02µ/ 1ml Streptavidin / 2,5mg/ml 378.95 



PMSA-130 0,13µ/ 1ml Streptavidin / 10mg/ml 298.90 



PMB-50 0,05µ/ 2ml Biotin / 2,5mg/ml 599.00 

PMB-100 0,1µ/ 2ml Biotin / 2,5mg/ml 369.00 

PMB-130 0,13µ/ 2ml Biotin / 10mg/ml 198.90 

PMB-250 0,25µ/ 2ml Biotin / 10mg/ml 188.50 

PMPA-50 0,05µ/ 1ml Protein A / 2,5mg/ml 239.00 

PMPA-100 0,1µ/ 1ml Protein A / 2,5mg/ml 239.00 

PMPA-130 0,13µ/ 1ml Protein A / 10mg/ml 236.90 

PMPA-250 0,25µ/ 1ml Protein A / 10mg/ml 215.50 

Magnetic Polystyrene Particles 

In many experiments the careful separation of cells or cellfragmentes is a problem. Magnetizable ( paramagnetic ) 

particles have the characteristic, to be magnetizated within a magnetic field. So they can be separeted easy within 

a solution. Outside of the magnet field the particles are not magnetic. These particles are made by coating a layer 

of iron oxide and polystyrene onto polystyrene core particles. The particles are useful for cellseparation, coupling of 

proteines, antibodies and DNA, affinity purification and DNA probe assays. The particles are monodisperse with low 

SD and a CV of less than 5%. They are supplied as aqueous suspension. 

Cat. # size/quantity Concentration chemistry 

Price 

[USD]

PM-2.5 2,0-2,9µ/ 10 ml 25 mg/ml plain 219.40 

PM-2.5 2,0-2,9µ/ 100 ml 25 mg/ml plain 1,265.00 

PM-3.5 3,0-3-9µ/ 10 ml 25 mg/ml plain 219.40 

PM-3.5 3,0-3-9µ/ 100 ml 25 mg/ml plain 1,265.00 





PMC-0.1 0.1-0.4µ/ 10 ml 25 mg/ml COOH funct. 235.95 



PMC-1.0 1,0-1,4µ/ 10 ml 25 mg/ml COOH funct. 235.95 

PMC-1.5 1,5-1,9µ/ 10 ml 25 mg/ml COOH funct 235.95 










PMN-1.0 1,0-1,4µ/ 10 ml 25 mg/ml NH2 funct. 241.67 







PME-3.5 3,0-3,9µ/ 10 ml 25 mg/ml Epoxy funct. 279.35 

Magnetizable Fluorescent Polystyrene Microparticles, supplied as 10 mg/ml 


Cat. # Size/quantity chemistry/color Price [USD] 

PFAM-2052 2,0-2,9µ/ 2ml NH2 yellow 238.85 

PFAM-2058 2,0-2,9µ/ 2ml NH2 pink 238.85 

PFAM-4056 4,0-4,9µ/ 2ml NH2 nile red 248.85 

PFCM-02556 0,2-0,39µ/ 2ml COOH nile red 238.85 

PFCM-1052 1,0-1,4µ/ 2ml COOH yellow 238.85 

PFCM-1058 1,0-1,4µ/ 2ml COOH pink 238.85 








Magnetic Polystyrene Particles with terminal PEG- groups 

These beads consists of magnetite in a polystyrene copolymerisate as organic matrix (density 1.2g/cm3). They 

include a final coating with terminal PEG-COOH or PEG-NH2 groups, which can be used for nonspecific or covalent 

binding of proteins, antibodies, DNA etc. 

The particles are monodisperse with low SD and a CV of less than 6%. The magnetisation is 3.0 emu/g beads 

(H=1.000 Oe) 

They are stable in aqueous buffers, methanol, ethanol, DMSO and are supplied as aqueous suspension. 

This type of magnetic beads can also be offered with coatings of avididin, streptavidin, protein A and albumin on 

request. 

Price

Cat. # size/quantity Concentration chemistry 

[USD] 

PMPEG-2.0COOH 2,0µ/ 10 ml 50 mg/ml PEG-COOH funct. 447.55 









PMPEG-3.0NH2 3,0µ/ 10 ml 50 mg/ml PEG-NH2 funct. 447.55 








Magnetic biodegradable particles - PLA with different surfaces 

Cat.# concentration/ quantity Size in micron Functional surface Price [USD] 

PMBD-100 10mg /ml, 10 ml 100 plain 280.80 

PMBD-100 10mg /ml, 10 ml 30 plain 280.80 

PMBD-100 10mg /ml, 10 ml 100 amino 370.80 

PMBD-100 10mg /ml, 10 ml 30 amino 370.80 

PMBD-100 10mg /ml 5 ml 100 COOH 370.80 

PMBD-100 10mg /ml 2ml 30 COOH 370.80 

Magnet Separation Rack for Microtubes 

To separate magnetic particles a high magnetic field as provided by strong neodymium magnets is 

necessary. 

This acrylic 10 place rack allows the simultaneous separation of 5 x 1,5/2,0ml microcentrifuge 

tubes and the storage of 5 x 1,5/2,0ml tubes in a 

Cat. # Description quantity Price [USD] 

MR-10 Magnet Separation Rack 1 109.60 

VariMag Separation Rack for Tubes 

The VariMag Separator accomodates tubes from 1,5 ml to 200 ml tissue culture bottle. It 

uses interchangable tube holders to secure different tube and bottle sizes. A set of three 

tube holders, smal-medium-large is included: 

smal: 4 x 1,5 ml and 4 x 10/12 x 75 mm tubes, 6 in total 

medium:two 15 ml or two 16 x 100 mm tubes, 4 in total 

large:two 200 ml tissue culture bottles directly without adapter. 

VaryMag-S is designed for smal scale use. It holds up to eight 1,5 ml tubes, 5 ml cryo 

vials or 10/12 x 75mm tubes. 


MR-4/4 VariMag Separation Rack 1 610.60 

MR-8 VariMag-S Separation Rack 1 495.85 

Magnetic Separation Racks for Microplates 

The MicroMag Separator is designed to fit to any 96-well microplate with round-, flat or Vbottom 

The magnetic strips on the separator will pull the particles to a corner of the well 

to facilicate the aspiration of supernatant during the washing 

The UltarMag and UltraMag-DW separator are designed to facilitate the washing of 

magnetic beads in the magnetic Particles Enzyme Immunoassay (MPEIA) using 96-well 

plates. The magnetic pegs of the separator fit between the wells underneath the 96-well 

plate 

If the separator is loaded with the microplate into an appropriate reader, the particles stay 

out of the light beam passing through the bottom of the well and corresponding holes in 

the UltraMag separator..


MR-96 UltarMag Separation Rack 1 743.65 

MR-96-DW UltraMag-DW Separation Rack 1 799.55 

Magnetic Silica particles - a fast method for DNA/RNA purification and Protein separation 

Separation techniques are goinig to be more and more important in biotechnology, to get on cost 

efective, simple , reproducable ways and by using automatisation systems. The large surface area 

of 50m2/g provides a high capacity to bind cells, bacteria, DNA/RNA , proteines or antibodies. 

These paramagnetic uniform non porous silica particles are with 80% magnetit content allow simple 

magnet separation. The are supolied in double destilled H2O, but can be offered in powder form 

on request. 

main applications of the chemical modifications: 

Silanol:DNA & RNA techniques, purification of genomic DNA, plasmid DNA, viral DNA or PCR 

products. DNA/RNA bind to the silica beads under high salt conditions as 4 mol NaL or 5 mol 

GuSNC. 

Silanol-ROB: especially developed for use of DNA/RNA separation in robotic systems. 

Carboxyl: binding of bioactive substances by the Carbodiimide methode 

Amino:binding of bioactive substances by the Carbodiimide methode 

Cyanuric replaces Chloromethyl due to better binding characteristics 

Streptavidin: biotin labeled molecules 

Biotin:avidin/streptavidin labeled molecules 

available on request: magnetic silica beads with Protein A andG, Oligo(dt), calf tymus DNA, 

Albumin and GaM (Fc). 

Cat.# size/ quantity Functional Gr/Concentr. Price [USD] 

PMSi-H.25-5 0,25µ / 5 ml Silanol, 50mg/ml 154.80 



PMSi-H1.0-5 1,0µ / 5 ml Silanol, 50mg/ml 154.80 

PMSi-ROB1.0-5 1,0µ / 5 ml Silanol, 200mg/ml 154.80 

PMSi-CH.25-5 0,25µ / 5 ml Carboxyl, 25mg/ml 129.75 

PMSi-CH.5-5 0,5µ / 5 ml Carboxyl, 25mg/ml 129.75 

PMSi-CH.75-5 0,27#181; / 5 ml Carboxyl, 25mg/ml 129.75 

PMSi-CH1.0-5 1,0µ / 5 ml Carboxyl, 25mg/ml 129.75 

PMSi-Cy.5-5 0,5µ / 5 ml Cyanuric, 25mg/ml 129.75 

PMSi-Cy.75-5 0,75µ / 5 ml Cyanuric, 25mg/ml 129.75 

PMSi-Cy1.0-5 1,0µ / 5 ml Cyanuric, 25mg/ml 129.75 

PMSi-AM.5-5 0,5µ / 5 ml Amino, 25mg/ml 129.75 

PMSi-AM.75-5 0,75µ / 5 ml Amino, 25mg/ml 129.75 

PMSi-AM1.0-5 1,0µ / 5 ml Amino, 25mg/ml 129.75 

PMSi-PoGl.5-5 0,5µ / 5 ml Polyglutaraldehyde, 25mg/ml 178.75 

PMSi-PoGl.75-5 0,75µ / 5 ml Polyglutaraldehyde, 25mg/ml 178.75 

PMSi-PoGl1.0-5 1,0µ / 5 ml Polyglutaraldehyde, 25mg/ml 178.75 

PMSi-SA.25-5 0,25µ / 5 ml Streptavidine, 10mg/ml 375.05 



PMSi-SA1.0-5 1,0µ / 5 ml Streptavidine, 10mg/ml 375.05 

PMSi-B.5-5 0,5µ / 5 ml Biotin, 10mg/ml 375.05 

PMSi-B.75-5 0,75µ / 5 ml Biotin, 10mg/ml 375.05 

PMSi-B1.0-5 1,0µ / 5 ml Biotin, 10mg/ml 375.05 

Magnetic Silica particles - 1,5µ with different surfaces 

Cat.# concentration/ quantity Functional surface Price [USD] 

PMSi-1.5 50mg /ml, 10 ml plain 425.80 

PMSi-1.5NH2 50mg /ml, 10 ml amino 465.50 

PMSi-1.5COOH 50mg /ml, 10 ml carboxy 465.50 

PMSi-1.5SA 10mg /ml 2ml Streptavidin 269.40 

PMSi-1.5A 10mg /ml 5 ml Avidin 315.30 

PMSi-1.5PA 10mg /ml 2ml Protein A 269.40 

PMSi-1.5BSA 10mg /ml 5 ml Albumin 385.60

Top of Page 


Print version 


G.Kisker GbR 


Newsletter 


Mit dem Newsletter schicken wir Ihnen regelmäßig aktuelle Neuigkeiten zu unseren Produkten zu. 

Selbstverstänlich geben wir Ihre e-mail Adresse nicht an Dritte weiter. 

With this newsletter we will send you regularly some informations and news about our products. Of course we will 

not pass your e-mail address on third parties. 

hier Ihre e-mail Adresse eingeben. 

please enter your e-mail address here. 

Abonnieren 

Subscribe 

Nach der Anmeldung erhalten Sie noch ein 

Bestätigungsmail. An dessen Ende steht ein 

vom Newsletter-System generierter link. Um in 

den Verteiler aufgenommen zu werden, 

müssen Sie diesen Link anklicken. Diese 

Funktion verhindert Email-Missbrauch! 

Wenn sich Ihre e-mail Adresse ändert, melden 

Sie sich einfach mit Ihrer neuen e-mail 

Adresse frisch an. Weitere Informationen 

finden Sie am Ende jedes Newsletters. 

Abonnement beenden 

Terminate subscription 

After your registration you will receive a 

confirmation mail. On its end you will 

find a link generated from the 

newsletter system. In order to join the 

distribution list you have to click the 

link. This prevents mail abusing! 

If your e-mail address is getting 

changed, just register again with your 

new e-mail address. Further 

informations will be given at the end of 

each newsletter. 

Fenster schließen

Kisker - Products for Biotechnology 


News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Deutsch 

Copyright © 1999-2005 Dipl.oec.troph.Gerlinde Kisker | Impressum | e-mail: contact | Newsletter 

Products for 

Biotechnology 

Our Product Range includes: 

Filter Tips 

Pipet Tip 

Gel Loading Tip 

PCR Tubes and Plates 


Rack Systems 

Cryoproducts 


LabelGuardTM Mikroliter Messzelle 

DNA-Workstation & Hybridisation 

Thermal Cycler 

Dry block heat bath 





file:///F|/Kisker/Kisker/index.html [08.12.2005 22:30:12]

Kisker Biotechnology - About us 


News & 

Offers 

Products 

Contact & 

Order 

Sitemap Home 



G.Kisker-Products for Biotechnology - a Supplier of High Quality 

Laboratory Products - was founded in 1990. Our goal is, to supply 

scientists working in the area of molecular biology, immunology, cell 

biology or related disciplines with high quality intrumentation and 

accessories at reasonable prices. Many products e.g. for the fast growing 

market PCR have been introduced by us and continously improved while 

passing lower costs to the scientists. 


The Catalog 

We have released our first online catalog. You are invited to look through 

16 different chapters, where the products and specialties are described in 

detail. The customer will find price and ordering information just at the 

product. For your convenience orders can be filled in a second window and 

released by different possibilities. 

Technical Service and Delivery Time 

Our Service Department has long experience in the scientific field to answer your upcomming questions as 

best and soon as possible. 

Our stock of consumables allows delivery within Germany mostly same day, while foreign customers should 

plan a few days, to prepare export paper work. 

Quotations are made promptly depending on the informations, we are getting from the customer. Custom 

synthesis and custom manufacturing quotes will be prepared as soon as possible and without costs for our 

customers. Please ask also for quantity purchases on a yearly demand basis. 

Worldwide Delivery 

We are working with domestic and international distributors, which are listed under Contact & Order. 

Distributor inquiries for areas, currently not covered, are always welcome. 

file:///F|/Kisker/Kisker/about.htm [08.12.2005 22:30:13]

Kisker Biotechnology - News & Special offers 


Newsletter 

News 

News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


From now on we provide an email newsletter for faster information about product news. To 

the registration 

MiniSealer 

the new semi automated system for reliable sealing of PCR-, deep-well 

and microplates 

read more ... 

Crystallography Plate 

HTP protein crysdtallisation plate with 96 wells for "Sitting Drop" method 

read more ... 

New: IsoFreeze PCR-Rack 

● personal PCR chiller rack with special gel-filling 

● maintains samples cool (under +4°) for 3 hours 

● color change from purple to pink at +7°C 

● useful for PCR-Tubes, - Strips and -Plates 

Special Price: Cat.# KR-96 49,80 Eur/2 Racks 

Price ex shipping and VAT 

We have introduced new products, current informations are available on our homepage. 

CombiCycler 

"CombiCycler with combined block for 0,2 and 0,5 ml PCR-Tubes 

compact - flexibel- low cost" 

Cat.# LCC-41 CombiCycler inclusive block 2.150,00 

Price net exclusive shipping. 

read more ... 

Incubation and 

Hybridization Chamber 

multiple applications, 

effective temperature control 

read more ... 



for ABI PRISM 310 

read more ... 

file:///F|/Kisker/Kisker/news.htm (1 von 2) [08.12.2005 22:30:14]

Kisker Biotechnology - News & Special offers 

Our range of beads is continously growing. You find different beads for most typical and 

many untypical applications like Calibration, Detection, Size Standarisation, biological 

applications like Flow Cytometry, Protein- & Antibody coupling, Magnetic Separation and for 

the production of immunoassays. 

Particles are now available from 10nm to 1000µ, many with different chemical coatings. 

Materials include polystyrene, silica, glass, pmma, melamine, polylactide, gold, 

paramagnetic silica and paramagnetic polymers 

For more information look through the chapter Microparticles. 

Special offer 

20% Introduction discount for Membrane of 100% pure 

nitrocellulose for transfer of proteins and nucleic acids 

read more ... 

file:///F|/Kisker/Kisker/news.htm (2 von 2) [08.12.2005 22:30:14] 

Top of Page

Kisker Biotechnology - Catalog Overview 


Filter Tips Pipet Tips 

DNA Workstation 

Hybridisation 

Documentation 


Thermal Cyclers 

News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

Products Catalog Overview 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Each product is described with more detailed 

informations including pack sizes and prices. To get 

these informations please click "go!" 

For online or fax orders please click button "Contact 

& order" 

You can also download the complete catalogue as 

PDF document (ca. 8MB) 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Cryoproducts Autoradiography 

LabelGuardTM PCR 

& DNA 

Measurement 

Filter Tip DNA-Workstation & Hybridisation 

Filtertips to avoid cross-contamination in PCR. Volume size 

from 0,1-1000µl, supplied as sterile racks or in bags. All 

are DNase-, RNase-, pyrogen free. The beveled form 

ensures high precision. Discounted bulk prices are offered. 

Pipet Tip Thermal Cycler 

We offer a complete line of pipet tips for various 

applications. Special tips like siliconized, beveled tips and 

robotic tips for Beckman Biomek & Zymark are all certified 

DNase-, RNase-, pyrogen free. 


With several variants of DNA-Workstations we offer the 

possibilty to set up a contamination free work place for 

pre and post sample processing. The work places are 

small and easy to clean. Hybridisation is taking place 

under absolut controlled conditions in the Hybridisation 

ofen. The capacity of 3, 6 or 12 high quality hybridisation 

bottles is variable. 

DNA amplification has become a standard technique and 

with our thermal cycler we offer a new inexpensive 

instrument. It features heated lid for oil free cycling, 

unlimited program storage, interchangable block formats 

for 0,5ml, 0,2ml and slides, subambient cooling 

capabilities, extremly small footprint. 

Gel Loading Tips & Pipettors Dry block heat bath 

Our gel loading tips are specialy suited for loading gels or 

recovery of samples. Tips with orifices from 0,54mm down 

to 0,17mm are available. Using flat tips with 0,17mm, 

loading of sequencing gels is easy and convenient. 

PCR Tubes and Plates Mini Centrifuges 

0,2ml & 0,5ml ultrathin PCR tubes and 8-strip tubes are 

manufactured from high polished moldes and ultra pure 

polypropylen. The longer cap design ensures leak free PCR, 

avoiding evaporation. PCR plates are available as 24, 32, 

48, 98, 384 PCR plates, all PCR products are certified 

DNase-, RNase-and pyrogen free. 

file:///F|/Kisker/Kisker/products.htm (1 von 2) [08.12.2005 22:30:15] 

Many sample need to be heated or cooled under 

controled conditions. We offer several types, from a low 

budget 53 places dryblock heat bath up to a dry block 

heat & cool bath, which allows to cool samples up to -4°C 

and to heat up to 95°C. All of them need small space only 

to fit in all types of laboratories. 

Where space ist almost limited our micro centrifuge is the 

best solution, to concentrate small samples at 6.400r.pm. 

The unit has only 12 cm Ø at 800g weight. Our new 

combi centrifuge allows centrifuging and vortexing in one 

instrument. Mini centrifuges with up to 14.000 r.pm. are 

also an ideal instrument for DNA work.

Kisker Biotechnology - Catalog Overview 

Centrifuge Tubes Rotator & Vortex Mixer 

Have a look to the highest quality of siliconized tubes, 

microcentrifuge tubes and screw cap tubes. They are 

certified DNase-, RNase-, pyrogen and metall free. 

Siliconized tubes ensure, that full amounts of enzymes or 

proteins are captured. Colored tubes are made of metall 

free dyes. 

For small university budgets we offer a line of different 

rotators for mixing, dialysis etc of samples. The rotators 

are available economical priced with 10r.p.m fixed speed 

or more convenient with variable speed. A variety of discs 

allows mixing of tubes from 4 - 40 mm Ø. 

Rack Systems Nylon Wool & PAP PEN 

We offer a complete line of racks for different applications. 

Most popular is our low priced autoclavable combi rack, 

which accept on 4 sides different tubes from 0,5 to 50ml. 

For pre & post PCR sample processing we offer the PCR 

Workstation, including a 96 well satelite rack for 0,2ml PCR 

tubes. 

Mononuclear leucocyte concentrates from freshly drawn 

blood can be separated easy into B-cells & T-cells using 

Nylon Wool Fiber. The Nylon Wool is combed, washed and 

ready to use. The PAP PEN provides a water repellant 

barrier, when circling around a specimen. Quantity of 

antibodies is reduced through the circal. PAP PEN is 

effective for immunostaining methods as PAP-, ABC-, BSAmethod. 

Cryoproducts PCR & DNA Measurement 

All your needs for cryo preserversation you find here: 

polypropylene cryoboxes or cardboxes in different colors 

and sizes to accept tubes from 0,2ml to 50ml, stickers "hotcold" 

stable in liquid nitrogen and under autoclaving 

conditions. We also manufacture cardboxes for your special 

needs. 

Autoradiography Microparticles 

Kisker X-ray cassetts are featuring extremly low radiation 

absorption and are manufactured for long shelflife. They 

can be used up to -70°C for exposure. For exposure we 

offer a complete line of high sensitive intensifying screens 

at reasonable prices. Film hangers, development tanks and 

further supplies help you to do your research. 

Top of Page 

file:///F|/Kisker/Kisker/products.htm (2 von 2) [08.12.2005 22:30:15] 

LabelGuard TM Mikroliter Messzelle, die Innovation für 

die DNA Analytik, nur 3-5 µl Probenvolumen, kompatibel 

mit den meisten Qualitätsspektrophotometern, 

Rückgewinnung der Probe zur Weiterverarbeitung 

möglich, hohe Reproduzierbarkeit, keine 

Probenverdünnung notwendig, schnell zu reinigen, keine 

Kreuzkontaminationen 

We offer a wide range of microparticles and many types 

of special beads for various applications. The 

microparticles are made from different materials, 

polystyrene, silica, melamine, glass, magnetit, available 

in sizes from 100nm up to 1000µ. Many of them can be 

supplied fluorescent or dyed. We offer bulk quantities and 

can arrange custom synthesis at reasonable prices




Headquarter 

News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Contact Order Terms Fax form Impressum Back 

G.Kisker GbR 


Postfach 1329 


Germany 

VAT-No.: DE 813219640 

phone: +49 2551-864310 

fax: +49 2551-864312 


Distributors 

To order through a distributor in your country please contact: 

Argentinia 



P&LK Tech SRL 



e-mail: info@plktech.com.ar 

Belgium 


P.O.Box 1336 



phone 31 71 5233917 

fax 31 71 5235594 

e-mail: info@baseclear.com 

Chile 



Las Condes 


Tel: (562)426 0444 

Fax: (562)378 5253 

e-mail: psakamoto@fishersci.cl 

China 

BILONG Transgenics 

A Creative Group for Transgenics 

13 Bei Yi Tiao, Zhong Guan Cun, 

Beijing 100080, China 

P.O. Box 2714, Beijing 100080, China 

phone: 86-10-8262-5664 

fax: 86-10-6253-2114 

e-mail: info@bilong.com 

web: http://www.bilong.com 

CROATIA 

file:///F|/Kisker/Kisker/order.htm (1 von 3) [08.12.2005 22:30:15] 

To send us notes or to request any special 

informations, quotations for bulk or custom 

synthesis please click contact. 

If you would like to order, you have the possibility 

to order on-line or to print out an order form. 

If you have questions regarding products, please 

call +49 (0)2551-864310. 

Iceland 


CisTron ehf 


108 Reykjavik 


Tel.: +354 695 2832 

Indonesia 



Pondok Bambu 


fax/phone: 62-2186606405 

e-mail: indolab_utama@telkom.net 

Korea 





tel : +82 2 6241 0288 

fax: +82 2 6241 0289 

e-Mail: info@seechem.com 


Kosovo 

KosovaMed 


Tel: 390 26 411 

Fax: 390 23 363 

e-mail: kosovamed@hotmail.com 

Netherlands 


P.O.Box 1336 


The Netherlands






phone: +385 1 33 69 610 

fax: +385 1 33 69 611 

direct:. +385 1 33 69 622 

mobile: +385 98 279 389 

mail: management@gorea-plus.hr 


Website: http://www.gorea-plus.hr 


Dione spol. s.r.o. 

Branisovská 31 

370 05 Ceské Budejovice 

phone/fax:38-5300376 

Denmark 

Frisette ApS 



phone: 86342244 

fax: 86345744 

e-mail: agf@frisenette.dk 


Egypt 





Tel: (202)4104662 

Fax: (202)4104662 

e-mail: ECGO_Cairo@web.de 

Espania 

Attendbio s.l. 

Calle Llacuna 162 

Dpto 315 

8018 Barcelona 

phone: 34 934019842 

fax: 34 934019843 

e-mail: attendbio@attendbio.com 

Ghana 

Robert Koch Health Care Service 

P.O.Box B.236 

Bantama, Kumasi 

phone: 51-23620 

fax: 51-25591 

Greece 

Lab Supplies 

P.Galanis 


11634 Greece 

phone/fax: 1-7294603 

e-mail:labsupplies@groovy.gr 

Hungary 

Biocenter Ldt 

temesvari krt. 62 

6726 Szeged 

phone: 62-432232 

file:///F|/Kisker/Kisker/order.htm (2 von 3) [08.12.2005 22:30:15] 

phone 31 71 5233917 

fax 31 71 5235594 


Poland 

Fundacja uniwersitetu im.Adama Mickiewicza 

UNIMARKET 

ul.Rubiez 64 

61-612 Poznan 

phone: 61-8220450 

fax: 61-8220440 

e-mail: unimarke@home.pl 



31-523Cracow 

Poland 

tel: +48-12-6653131 

fax: +48-12-6653132 

medianus@medianus.net 

Portugal 

VIDROLAB2, LDA 

RUA DAS ALMINHAS, 936 - PEROSINHO 

APARTADO 91 - EC CARVALHOS 

4416-901 PEDROSO 

Phone: 00 351 22 762 15 33 / 32 64 

FAX: 00 351 22 762 33 06 

e-mail: vidrolab@vidrolab.pt 

Singapore 

Rita Tan 

A-Z Solutions 



Singapore 

phone: 63161068 & 63162783 

fax: 63167162 

e-mail: azsolve@singnet.com.sg 

Slovakia 


Bojnická 20 


Tel: 421/2/44 880 160 

Fax: 421/2/44 880 165 

e-mail: janitor.martin@lambda.sk 

www.lambda.sk 

Slovenien 




Slovenia 

Tel: 00386 1 5202 302 

Fax: 00386-1-5202 164 

e-mail. Promed@s5.net 

USA 

Corpuscular Inc 

52 Papania Dr 

Mahopac, NY 10541 

phone: 845 661 1421 

fax: 845 628 8461 

email: dadachov@corpuscular.com


fax: 62-433422 

file:///F|/Kisker/Kisker/order.htm (3 von 3) [08.12.2005 22:30:15]


Sitemap 

Product Catalog 

Catalog Overview 


Filter Tips 

Pipet Tips 


& Pipettors 



Rack Systems 

Cryoproducts 


News & 

Special offer 

file:///F|/Kisker/Kisker/sitemap.htm [08.12.2005 22:30:16] 

Products 

Contact & 

Order 

Sitemap Home 


DNA Workstation Hybridisation Documentation 

Electrophoresis Thermal Cyclers 





DNA Measurement 


Others 

Home 


News & special offers 


Contact 

Order 


Fax form 

Impressum 

Sitemap 

German

Kisker - Produkte für die Biotechnologie 

Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap English 


Produkte für die 

Biotechnologie 

Unsere Produktpalette umfaßt: 

Filterspitzen 

Pipettenspitzen 

Gel-Auftragsspitzen 

PCR-Röhrchen und PCR-Platten 

Zentrifugenröhrchen 

Rack Systeme 

Cryoprodukte 

Autoradiographie 

LabelGuardTM Mikroliter Messzelle 

DNA-Workstation & Hybridisierung 

Thermo Cycler 

Trockenblock Heiz- und Kühlgeräte 

Mini Zentrifugen 

Rotatoren & Vortex-Mixer 

Nylon Wolle & PAP PEN 

Mikropartikel 

file:///F|/Kisker/Kisker/deutsch/index.html [08.12.2005 22:30:16]

Kisker Biotechnology - Wir über uns 

Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Wir über uns 

G.Kisker-Produkte für die Biotechnologie - ein Lieferant für hochqualitative 

Laborprodukte- wurde 1990 gegründet. Unsere Zielsetzung ist, 

Wissenschaftler, die in den Bereichen Molekularbiologie, Immunologie, 

Zellbiologie oder verwandter Disziplinen arbeiten, mit qualitativ 

hochwertigen Geräten und Zubehör zu akzeptablen Preisen zu beliefern. 

Viele Produkte, so z.B. für den schnell wachsenden Bereich PCR, wurden 

von uns eingeführt und konnten späte in stetig verbesserter Form zu 

niedrigeren Preisen angeboten werden. 

Achtung: PCR ist ein US-Patent der Firma Hoffmann-La-Roche 

Der Katalog 

Wir freuen uns, Ihnen hier unseren erste Version des Online-Kataloges 

präsentieren zu können. Wir laden Sie ein, durch 16 verschiedene Kapitel 

zu stöbern, in denen die Produkte und Spezialitäten im Detail beschrieben 

sind. Preise und Bestellinformationen sind zu jedem Produkt angegeben. 

Aufträge können in Sekunden in einem 2. Windows Fenster ausgefüllt 

werden und auf unterschiedlichen Wegen an uns übermittelt werden. 

Technischer Service und Lieferzeiten 

Unsere Serviceabteilung weist langjährige Erfahrung im wissenschaftlichen Umfeld auf und 

bearbeitet bzw. beantwortet Ihre Fragen best- und schnellstmöglich. 

Unser umfangreicher Lagerbestand an Verbrauchsmaterialien, ermöglicht Lieferungen 

innerhalb Deutschlands in 24 Stunden, Kunden außerhalb der EG müssen u.U. einige Tage 

einplanen, wenn entsprechende Exportpapiere bearbeitet werden müssen. 

Angebote werden von uns nach Möglichkeit prompt bearbeitet, sofern uns die notwendigen 

Produkt-Daten vorliegen. Angebote für Kundensynthesen und Kundenproduktionen werden 

schnellstmöglich und ohne Kosten für unsere Kunden erstellt. Anfragen nach 

Spezialpreisen für Jahresabnahmemengen sind willkommen. 

Weltweite Distribution 

Wir arbeiten eng mit nationalen und internationalen Händlern zusammen, welche unter 

Bestellung gelistet sind. Vertretungsanfragen für Gebiete, die momentan nicht besetzt sind 

und von uns direkt bearbeitet werden, sind stets willkommen. 

file:///F|/Kisker/Kisker/deutsch/wir.htm [08.12.2005 22:30:17]

Kisker Biotechnology - Neuigkeiten & Aktionen 

Wir über uns 

Newsletter 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Ab sofort steht Ihnen ein email-Newsletter zur Verfügung, mit dem wir Sie regelmäßig über 

Neuheiten informieren möchten. Zur Anmeldung 

Katalog 

Unser aktueller Katalog 2004/05 ist verfügbar. Produktergänzungen bzw. Preisänderungen 

finden Sie hier auf unserer Homepage. 

Haben Sie Ihr Exemplar verlegt oder noch nicht erhalten, fordern Sie dieses am besten per 

Formular an. 

Neuigkeiten 

MiniSealer 

das neue halbautomatische System für den zuverlässigen Verschluss von 

PCR- und Deep Well Platten 

mehr lesen ... 

Proteinkristallisation 

96 Well Mikrotestplatten für die "Sitting Drop" Methode 


Neu: IsoFreeze PCR-Rack 

● ein PCR-Kühlrack mit spezieller Gelfüllung 

● Probenkühlung für circa 3 Stunden unter +4°C 

● Temperaturindikator mit Farbumschlag bei 7°C 

● ein ideales Hilfsmittel für die Präparation von, 0,2 ml PCR-Tubes/- 

Streifen und PCR-Platten 

Aktionspreis: Kat.# KR-96 49,80 Eur/2 Racks 

Preise zuzüglich Versandkosten und Mwst 

CombiCycler 

"CombiCycler mit kombinierten Block für 0,2 und 0,5 ml PCR- 

Tubes kompakt - flexibel- preisgünstig" 

Kat.# LCC-41 CombiCycler inklusive Block 2.150,00 

Preise zuzüglich Versandkosten und MwSt. 


Inkubations- und 

Hybridisierungskammern 

vielfältige Anwendungen, 

effektive Temperierung 


file:///F|/Kisker/Kisker/deutsch/news.htm (1 von 2) [08.12.2005 22:30:17]

Kisker Biotechnology - Neuigkeiten & Aktionen 

Mikropartikel 


für ABI Prism 310 


Diese Produktlinie wächst ständig. So bieten wir heute eine breite Palette verschiedener 

Beads für Anwendungen wie Kalibrierung, Detektion, biolgische Applikationen wie 

Durchflusszytometrie, Protein- und Antikörperkopplung, Magnetseparation und für die 

Produktion diagnostischer Tests an. 

Die Produktpalette umfasst Partikel von 10nm bis zu 1000µ in Materialien wie: Polystyol, 

PMMA, Melamin,Polylactid, Glas, Silikat, Gold sowie paramagnetische Silikat und 

Polymerpartikel. 

Die Partikel können in bulk Mengen und oftmals in verschiedenen chemischer 

Oberflächenmodifikation geliefert werden. Fragen Sie uns. 

Mehr Informationen finden Sie auf unserer Homepage unter Microparticles. 

Aktionspreis 

20% Einführungsrabatt auf Membranen aus 100% reiner 

Nitrocellulose für den Protein- und Nukleinsäuretransfer 


Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/news.htm (2 von 2) [08.12.2005 22:30:17]

Kisker Produkte für die Biotechnologie - Katalog Überblick 

Wir über uns 



Hybridisierung 

Dokumentation 

Elektrophorese 

Thermocycler 

Produkt Überblick 

Neuigkeiten 

& Aktionen 

Gel Loading 

Tips & Pipetten 

Dry Block Heat 

& Water Bath 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


PCR Tubes & 

Plates 

Mini 

Centrifuges 

Jedes Produkt wird im Katalog detaillierter mit 

Packungsgrössen und Preisen beschrieben. Um diese 

Informationen zu lesen, klicken Sie bitte auf "go!" 

Für Online- oder Faxbestellungen klicken Sie bitte 

Kontakt & Bestellung. 

Sie können sich den kompletten Katalog auch als 

PDF Dokument (ca. 8MB) herunterladen. 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack Systems Cryoproducts Autoradiography 

Nylon Wool & 

PAP PEN 

LabelGuardTM 

PCR & DNA 

Measurement 


Filterspitzen DNA-Workstation und Hybridisierung 

Filterspitzen zur Vermeidung von Kreuzkontaminationen in 

der PCR. Verfügbare Volumen im Bereich von 0,1µ - 

1000µl, steril im Rack oder als unsterile Beutelware. Alle 

Spitzen sind DNase, RNase- und Pyrogen frei. Die 

zugespitze Form garantiert höchste Präzision. Günstige 

Staffelpreise für grössere Abnahmemengen. 

Pipettenspitzen Thermo Cycler 

Wir bieten eine komplette Linie von Pipettenspitzen für 

verschiedene Anwendungen an. Spezialspitzen, wie low 

retention (silikonisierte) Spitzen, extra zugespitzte Spitzen, 

Mikrospitzen und Spitzen für den Einsatz in 

Pipettierautomaten wie Beckman Biomek und Zymark sind 

DNase-, RNase- und Pyrogen frei. 

Verschieden Varianten von DNA-Workstations 

ermöglichen kontaminationsfreies Arbeiten bei der PCR- 

Vor- und Nachbearbeitung. Die Arbeitsplätze sind klein 

und einfach zu reinigen. In unserem Hybridisierungsofen 

finden Hybridisierungen unter absolut kontrollierten 

Bedingungen statt. Die Kapazität reicht je nach 

Flaschengrösse für 3 - 12 Flaschen. 

DNA-Amplifikation ist inzwischen ein Standard in den 

molekularbiologischen Laboratorien. Wir bieten eine 

extrem preisgünstige Alternative, die auf Vorzüge teurer 

Geräte nicht verzichtet: heizbarer Deckel für oelfreies 

Arbeiten, unbegrenzte Programmzahl, austauschbare 

Heizblöcke und Kühlmöglichkeit unterhalb 

Raumtemperatur. 

Gel-Auftragsspitzen & Pipetten Trockenblock Heiz- und Kühlgeräte 

Unsere Gel-Auftragsspitzen sind speziell für die 

Probenentnahme und Beladung von Gelen geeignet. 

Spitzen mit Durchmessern von 0,54 bis 0,17mm sind 

verfügbar. Die 0,17mm Spitzen erleichtern insbesonder die 

Beladung von Sequenziergelen. 

PCR-Tubes und PCR-Platten Mini-Zentrifugen 

file:///F|/Kisker/Kisker/deutsch/produkte.htm (1 von 2) [08.12.2005 22:30:18] 

Oftmals müssen Proben unter kontrollierten Bedingungen 

erwärmt oder gekühlt werden. In unserm Katalog finden 

Sie unterschiedliche Varianten inklusive eines "Low 

Budget" Gerätes für 53 Proben. Die Temperaturbereiche 

unserer Kühlgeräte geht von -5°C bis Raumtemperatur 

sowie -4°C bis 95°C. Alle Geräte benötigen nur wenig 

Platz.

Kisker Produkte für die Biotechnologie - Katalog Überblick 

Unsere 0,2ml und 0,5ml ultradünnen PCR-Tubes werden in 

hochpolierten Formen aus ultra reinem Polypropylen 

hergestellt. Die längere Kappenform garantiert PCR ohne 

Evaporationen. Die PCR-Platten stehen als 24, 32, 48, 98 

und 384 Formate zur Verfügung. Alle PCR-Produkte sind 

DNase-, RNase- und Pyrogen frei. 

Wo immer Platz im Labor limitiert ist, sind unser Micro- 

und Minizentrifugen die beste Lösung, kleine Proben zu 

konzentrieren. Unser Micro-Zentrifuge hat eine 

Geschwindigkeit von 6.400r.p.m., ist 800 g leicht und hat 

nur 12 cm Durchmesser. Die neue Kombi-Zentrifuge 

erlaubt Zentrifugieren und Vortexen in einem Gerät. 

Desweitern bieten wir Zentrifugen bis 14.000 r.p.m. für 

DNA-Arbeiten an. 

Zentrifugenröhrchen Rotatoren und Vortex-Mixer 

Werfen Sie einen Blick auf unsere "Low Retention" 

(silkonisierte) Mikrozentrifugenröhrchen von höchster 

Qualität. Sie sind zertifiziert DNase-, RNase-, Pyrogen- und 

Metall frei. Auch farbige Tubes sind Metall frei. Die 

silikonisierten Tubes stellen sicher, dass die gesamte 

Menge an Enzymen oder Proteinen erhalten bleibt. 

Für kleine Univertsitätsbudgets bieten wir eine Linie 

verschiedener Rotatoren zum Mischen, Dialysieren etc.. 

an. Unser preisgünstiges Gerät bietet 10 r.pm. 

Festgeschwindigkeit, während das komfortablere Gerät 

variable Geschwindigkeiten von 5-50r.p.m., Timer und 

weiter Funktionen bietet. Eine Vielzahl von 

Probenscheiben erlaubt den Einsatz von Röhrchen im 

Durchmesser von 4mm bis zu 40mm. 

Racksysteme Nylon Wolle und PAP PEN 

Hier finden Sie eine komplette Linie von Racks für 

unterschiedlichste Anwendungen. Unser Hit ist das sehr 

preisgünstige autoklavierbare "Combi Rack", welches auf 

grund seiner 4 Seiten für unterschiedliche Tubes von 0,5- 

50ml benutzt werden kann. Für die Vor- und 

Nachbearbeitung der PCR empfehlen wir die "PCR- 

Workstation", welche auch ein 96 well Satelliten Rack für 

0,2ml Tubes beinhaltet. 

Mononukleare Leukozytenkonzentrate können auf 

einfache Weise in B- und T-Zellen mittels Nylon Wolle 

aufgetrennt werden. Die Nylon Wolle ist gekämmt, 

gewaschen und gebrauchsfertig. Der Pap Pen erzeugt 

eine wasserabweisende Barriere auf dem Objektträger, 

der das Überschichten der Probe vereinfacht. Der PAP 

PEN kann für PAP-, ABC-, BSA-, Immunofluoreszenz und 

DNA-Techniken eingesetzt werden. 

Cryoprodukte PCR & DNA Measurement 

Alles was Sie für Cryo-Lagerung benötigen finden Sie hier: 

Polypropylen Cryoboxen oder Boxen aus 

wasserabweisendem Kartonmaterial in verschiedenen 

Farben und Grössen für Röhrchen von 0,2ml bis 50ml, 

Labels "heiss-kalt" für den Temperaturbereich von -196°C 

bis +121°C. Wir bieten auch Cryoboxen aus Kartonmaterial 

nach Kundenwunsch an. 

Autoradiographie Mikropartikel 

Kisker X-ray Kassetten weisen geringste 

Strahlenabsorption auf, kunststoffbeschichtetes Aluminium 

garantiert längste Lebensdauer. Unsere vernieteten 

Kassetten können bis -70°C eingesetzt werden. Passend 

dazu bieten wir Verstärkungsfolien mit hoher 

Empfindlichkeit zu unschlagbar günstigen Preisen an. 

Filmrahmen, Entwicklungsanlagen und weiteres Zubehör 

sind weitere Hilfen für Ihre Forschungsarbeit. 

Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/produkte.htm (2 von 2) [08.12.2005 22:30:18] 

LabelGuard TM Mikroliter Messzelle, die Innovation für 

die DNA Analytik, nur 3-5 µl Probenvolumen, kompatibel 

mit den meisten Qualitätsspektrophotometern, 

Rückgewinnung der Probe zur Weiterverarbeitung 

möglich, hohe Reproduzierbarkeit, keine 

Probenverdünnung notwendig, schnell zu reinigen, keine 


Ein breites Sortiment von Mikropartikeln und speziellen 

Beads für unterschiedlichste Applikationen.. Sie sind aus 

verschiedenen Materialien wie u.a. Polystyrol, Silica, 

Melamine, Glas und abbaubares Polylactid in Grössen von 

0,01µ bis 1000µ hergestellt. Unsere Mikropartikel können 

mit chemischen Modifikationen, Fluoreszenzen und 

Farben geliefert werden, zudem bieten wir 

Kundensynthesen an.


Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Kontakt Bestellung agb Fax Form. Impressum Zurük 

Kontakt & Bestellungen 

Stammsitz 

G.Kisker GbR 


Postfach 1329 

D-48543 Steinfurt 

VAT-No.: DE 813219640 

phone: 02551-864310 

fax: 02551-864312 


Distributoren 

Um uns eine Nachricht zu senden, oder um spezielle 

Informationen anzufordern, z.B. Mengenangebote oder 

Spezialanfertigungen, benutzen Sie bitte das Kontaktformular. 

Wenn Sie eine Bestellung aufgeben mäöchten, können Sie das 

online Bestellformular benutzen oder Sie können das Fax- 

Bestell-Formular ausdrucken und per Fax versenden. 

Für eilige Anfragen benutzen Sie bitte folgende Telefonnummer 

02551-864310. 

Wenn Sie in Ihrem Land über einen unserer Distributoren bestellen möchten, 

stehen Ihnen folgende Firmen zur Verfügung: 

Argentinia 



P&LK Tech SRL 



e-mail: info@plktech.com.ar 

Belgium 


P.O.Box 1336 



phone 31 71 5233917 

fax 31 71 5235594 


Chile 



Las Condes 


Tel: (562)426 0444 

Fax: (562)378 5253 

e-mail: psakamoto@fishersci.cl 

China 

BILONG Transgenics 

A Creative Group for Transgenics 

13 Bei Yi Tiao, Zhong Guan Cun, 

Beijing 100080, China 

P.O. Box 2714, Beijing 100080, China 

phone: 86-10-8262-5664 

fax: 86-10-6253-2114 

e-mail: info@bilong.com 

web: http://www.bilong.com 

file:///F|/Kisker/Kisker/deutsch/order.htm (1 von 3) [08.12.2005 22:30:18] 

Iceland 


CisTron ehf 


108 Reykjavik 


Tel.: +354 695 2832 

Indonesia 



Pondok Bambu 


fax/phone: 62-2186606405 

e-mail: indolab_utama@telkom.net 

Korea 





tel : +82 2 6241 0288 

fax: +82 2 6241 0289 

e-Mail: info@seechem.com 


Kosovo 

KosovaMed 


Tel: 390 26 411 

Fax: 390 23 363 

e-mail: kosovamed@hotmail.com 

Netherlands 

BaseClear Labproducts B.V.


CROATIA 





phone: +385 1 33 69 610 

fax: +385 1 33 69 611 

direct:. +385 1 33 69 622 

mobile: +385 98 279 389 

mail: management@gorea-plus.hr 


Website: http://www.gorea-plus.hr 


Dione spol. s.r.o. 

Branisovská 31 

370 05 Ceské Budejovice 

phone/fax:38-5300376 

Denmark 

Frisette ApS 



phone: 86342244 

fax: 86345744 

e-mail: agf@frisenette.dk 


Egypt 





Tel: (202)4104662 

Fax: (202)4104662 

e-mail: ECGO_Cairo@web.de 

Espania 

Attendbio s.l. 

Calle Llacuna 162 

Dpto 315 

8018 Barcelona 

phone: 34 934019842 

fax: 34 934019843 

e-mail: attendbio@attendbio.com 

Ghana 

Robert Koch Health Care Service 

P.O.Box B.236 

Bantama, Kumasi 

phone: 51-23620 

fax: 51-25591 

Greece 

Lab Supplies 

P.Galanis 


11634 Greece 

phone/fax: 1-7294603 

e-mail:labsupplies@groovy.gr 

Hungary 

Biocenter Ldt 

temesvari krt. 62 


P.O.Box 1336 



phone 31 71 5233917 

fax 31 71 5235594 


Poland 

Fundacja uniwersitetu im.Adama Mickiewicza UNIMARKET 

ul.Rubiez 64 

61-612 Poznan 

phone: 61-8220450 

fax: 61-8220440 

e-mail: unimarke@home.pl 



31-523Cracow 

Poland 

tel: +48-12-6653131 

fax: +48-12-6653132 

medianus@medianus.net 

Portugal 

VIDROLAB2, LDA 

RUA DAS ALMINHAS, 936 - PEROSINHO 

APARTADO 91 - EC CARVALHOS 

4416-901 PEDROSO 

Phone: 00 351 22 762 15 33 / 32 64 

FAX: 00 351 22 762 33 06 

e-mail: vidrolab@vidrolab.pt 

Singapore 

Rita Tan 

A-Z Solutions 



Singapore 

phone: 63161068 & 63162783 

fax: 63167162 

e-mail: azsolve@singnet.com.sg 

Slovakia 


Bojnická 20 


Tel: 421/2/44 880 160 

Fax: 421/2/44 880 165 

e-mail: janitor.martin@lambda.sk 

www.lambda.sk 

Slovenien 




Slovenia 

Tel: 00386 1 5202 302 

Fax: 00386-1-5202 164 

e-mail. Promed@s5.net 

USA 

Corpuscular Inc 

52 Papania Dr 

Mahopac, NY 10541 

phone: 845 661 1421 

fax: 845 628 8461


6726 Szeged 

phone: 62-432232 

fax: 62-433422 


email: dadachov@corpuscular.com


Sitemap 

Produkt Katalog 

Katalog Überblick 

Wir über uns 

Filter Tips 

Pipet Tips 


& Pipetten 



Rack Systems 

Cryoproducts 


Neuigkeiten 

& Aktionen 

file:///F|/Kisker/Kisker/deutsch/sitemap.htm [08.12.2005 22:30:19] 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


DNA Workstation Hybridisierung Dokumentation 

Elektrophorese Thermocycler 





DNA Measurement 


Andere 

Home 

Wir über uns 

Neuigkeiten & Aktionen 

Kontakt & Bestellung 

Kontakt 

Bestellung 

agb 

Fax Formular 

Impressum 

Sitemap 

Englisch


Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Kontakt Bestellung agb Fax Form. Impressum Zurük 

Impressum Web Design 

G.Kisker GbR 



P.O. Box 1329 


Germany 

phone: +49 2551-864310 

fax: +49 2551-864312 

e-mail contact@kisker-biotech.com 


file:///F|/Kisker/Kisker/deutsch/impressum.htm [08.12.2005 22:30:19] 

imc marketing & consult gmbh 

Goethestr. 15 

69242 Muehlhausen 

Germany 

Telefon +49 (0)6222 64776 

Telefax +49 (0)06222 64778 

e-mail info@marketing-consult.de 

www.marketing-consult.de

Kisker Produkte für die Biotechnologie - Newsletter 

G.Kisker GbR 


Newsletter 


Mit dem Newsletter schicken wir Ihnen regelmäßig aktuelle Neuigkeiten zu unseren Produkten zu. 

Selbstverstänlich geben wir Ihre e-mail Adresse nicht an Dritte weiter. 

With this newsletter we will send you regularly some informations and news about our products. 

Of course we will not pass your e-mail address on third parties. 

hier Ihre e-mail Adresse eingeben. 

please enter your e-mail address here. 

Abonnieren 

Subscribe 

Nach der Anmeldung erhalten Sie noch ein 

Bestätigungsmail. An dessen Ende steht ein 

vom Newsletter-System generierter link. Um in 

den Verteiler aufgenommen zu werden, müssen 

Sie diesen Link anklicken. Diese Funktion 

verhindert Email-Missbrauch! 

Wenn sich Ihre e-mail Adresse ändert, melden 

Sie sich einfach mit Ihrer neuen e-mail Adresse 

frisch an. Weitere Informationen finden Sie am 

Ende jedes Newsletters. 

file:///F|/Kisker/Kisker/newsletter/index.html [08.12.2005 22:30:20] 

Abonnement beenden 

Terminate subscription 

After your registration you will receive a 

confirmation mail. On its end you will find a link 

generated from the newsletter system. In order 

to join the distribution list you have to click the 

link. This prevents mail abusing! 

If your e-mail address is getting changed, just 

register again with your new e-mail address. 

Further informations will be given at the end of 

each newsletter. 

Fenster schließen



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 



Impressum Web Design 

G.Kisker GbR 



P.O. Box 1329 


Germany 

phone: +49 2551-864310 

fax: +49 2551-864312 



file:///F|/Kisker/Kisker/impressum.htm [08.12.2005 22:30:20] 

imc marketing & consult gmbh 

Hauptstr. 104 

69242 Muehlhausen 

Germany 

Telefon +49 (0)6222 64776 

Telefax +49 (0)06222 64778 

e-mail info@marketing-consult.de 

www.marketing-consult.de



Questionaire 

News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 



On this side you have the possibility to order further information, ask for an appointment or just tell us your opinion. 

Please complete the questionaire as detailed as possible. The more precisely you describe your wishes and requirements in 

the text field "comments", the quicker and better we can reply. 

Please send further information to me. 

Please call me for arranging for a personal meeting. 

First Name: Name: 

Company: Position: 

Street: Country: 

PAC/City: Telefon: 

eMail: Fax: 

Newsletter 

additional details of your business requirements commments 

file:///F|/Kisker/Kisker/contactform.htm [08.12.2005 22:30:21] 

For sending, please click for deleting, please click


Anfrage 

Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Kontakt Bestellung agb Fax Form. Impressum Zurück 

Hier haben Sie die Möglichkeit, weitere Informationen (Katalog) anzufordern, einen Termin zu vereinbaren, oder Ihre Meinung 

und Kritik zu äußern. 

Bitte füllen Sie das Formular möglichst vollständig aus. Je präziser Sie Ihre Wünsche oder Anforderungen formulieren, desto 

schneller und genauer können wir Ihnen antworten. 

Vorname: 

Bitte senden Sie mir einen Katalog. 

Bitte senden Sie mir mehr Informationen (siehe Kommentarfeld). 

Bitte vereinbaren Sie telefonisch einen Termin mit uns. 

Nachname: 

Firma: Position: 

Strasse: Land: 

PLZ/Ort: Telefon: 

eMail: Fax: 

Angaben zu Ihrer Tätigkeit Ihren Anforderungen Ihrem 

Kommentar 

file:///F|/Kisker/Kisker/deutsch/contactform.htm [08.12.2005 22:30:21]


Order form 

Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 



On this side you have the possibility to order online using a simple e-mail. Please complete the order form as detailed as possible. The 

more precisely you fill out all fields, the quicker and better we can deliver. 



Name: Name: 




City: City: 

Postal code & State: Postal code & State: 

Phone no: 

Fax no: 




your purchase order no: (for EEC members only): 




file:///F|/Kisker/Kisker/deutsch/orderform.htm (1 von 2) [08.12.2005 22:30:22]




file:///F|/Kisker/Kisker/deutsch/orderform.htm (2 von 2) [08.12.2005 22:30:22]


Order form 


News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 



On this side you have the possibility to order online using a simple e-mail. Please complete the order form as detailed as possible. The 

more precisely you fill out all fields, the quicker and better we can deliver. 



Name: Name: 




City: City: 

Postal code & State: Postal code & State: 

Phone no: 

Fax no: 




your purchase order no: (for EEC members only): 




file:///F|/Kisker/Kisker/orderform.htm (1 von 2) [08.12.2005 22:30:23]




file:///F|/Kisker/Kisker/orderform.htm (2 von 2) [08.12.2005 22:30:23]



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 





2) Products 



3) Prices 









By cheque drawn on a german bank, by wire transfer to our bank and account as indicated on the invoice. 

All bank charges are subject of the purchaser. 




7) Shipments 







8) Returns 





applications. 



file:///F|/Kisker/Kisker/terms.htm [08.12.2005 22:30:23]


Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 





2) Products 



3) Prices 









By cheque drawn on a german bank, by wire transfer to our bank and account as indicated on the invoice. 

All bank charges are subject of the purchaser. 




7) Shipments 







8) Returns 





applications. 



file:///F|/Kisker/Kisker/deutsch/terms.htm [08.12.2005 22:30:24]


Fax form 


Wir über uns 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 




● download the fax form in PDF Format 

● download the fax form in Rich Text Format 

● download the fax form in Word Format 

● Please click on the fax to expand and to print out directly! 

file:///F|/Kisker/Kisker/deutsch/faxform.htm [08.12.2005 22:30:26]


Fax form 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 




● download the fax form in PDF Format 

● download the fax form in Rich Text Format 

● download the fax form in Word Format 

● Please click on the fax to expand and to print out directly! 

file:///F|/Kisker/Kisker/faxform.htm [08.12.2005 22:30:26]

Gerlinde Kisker P.O.Box 1329 Phone: +49 (0) 2551-864310 

Products for Biotechnology D-48543 Steinfurt Fax: +49 (0) 2551-864312 

Order via Fax, please print, fill out and fax to: +49 (0) 2551-864312 

Invoice adress: 

Name: ________________________________________________________ 

Institute/Company ________________________________________________________ 

Department ________________________________________________________ 

Street ________________________________________________________ 

City ________________________________________________________ 

Postal code & State ________________________________________________________ 

Phone no ________________________________________________________ 

Fax no ________________________________________________________ 

e-mail ________________________________________________________ 

Customer order no ________________________________________________________ 

VAT ( value added tax ) identification no (for EEC members only) ____________________ 

Date _____________ Name ___________________ Signature __________________ 


Cat. # Description Pack size quantity PriceDM Euro 

Please fill out shipping adress if different from invoice adress: 

Name: _______________________ Institute/Company: ________________________ 

Department.: __________________ Street: __________________________________ 

City: _________________________ Postal code & State: _______________________

file:///F|/Kisker/Kisker/images/faxformg.gif 

file:///F|/Kisker/Kisker/images/faxformg.gif (1 von 2) [08.12.2005 22:30:28]

file:///F|/Kisker/Kisker/images/faxformg.gif 

file:///F|/Kisker/Kisker/images/faxformg.gif (2 von 2) [08.12.2005 22:30:28]

Kisker-Biotech - filter tips 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

Wollen Sie ein Online - Bestellformular ausfüllen, während 

Sie im Katalog blättern? Klicken Sie einfach hier, um ein 

Extra-Fenster zu öffnen. 

Quali - Tips, sterile Filterspitzen in Racks 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Diese hydrophoben Filterspitzen eliminieren Aerosole komplett. Die Produkte sind 

gamma-sterilisiert und werden zur Vermeidung von Kreuzkontaminationen 

eingesetzt. Steriles Arbeiten ist insbesondere wichtig bei allen PCR-Techniken , wo 

Kontamination mit Fremd-DNA über die Pipette zu falschen Ergebnissen führt. 

Aber auch bei anderen Anwendungen, wo eine Kontamination der Pipette mit 

biologischen, radioaktiven oder korrosiven Materialien vermieden werden soll, ist 

der Einsatz der Filtertips zu empfehlen. Die Spitzen sind zertifiziert DNase-, RNase- 

und Pyrogen frei! Die konisch zulaufende Spitzenform erhöht die Präzision. 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 

Für eine Druckversion dieser Seite klicken Sie einfach auf 

das Druckersymbol 

1 VE = 10x96 Tips im Rack 1-4 VE 5-9 VE 10 VE 

Kat. # Volumen Passform Euro Euro Euro 

A300S 0,1 - 10µl Gilson P2 P10 62,95 59,85 54,75 

A300SLang 0,1 - 10µl Gils.P2,P10,Epp. 89,80 -- -- 

A250S 0,1 - 2,5µl Epp.0,1-2,5µl,P2 89,80 -- -- 

A400S 0,5 - 10µl Eppend.0,5-10µl 62,95 59,85 54,75 

A20S 0,5 - 20µl Universal 62,95 59,85 54,75 





A350S 1,0 - 300µl Finn,Capp 62,95 59,85 54,75 

A1000S 100 - 1000µl Universal 68,00 (10x100) 63,95 57,95 

Quali - Tips, Filterspitzen Beutelware 

file:///F|/Kisker/Kisker/deutsch/filter.htm (1 von 3) [08.12.2005 22:30:30] 

Microparticles


Diese Filtertips haben gleiche Eigenschaften wie die sterilen Spitzen (siehe links), sind nicht gammasterilisiert 

aber unter Reinraumbedingungen produziert und abgefüllt sowie DNase-, RNase- und Pyrogenfrei. 

Sie können bei Bedarf vom Anwender wie folgt autoklaviert werden: bei 120°C unter 15 PSI für 10-15 

Minuten. 

1 VE = Beutel/1000 1-4 VE 5 -9 VE 10 VE 


A30UB 0,1 - 10µl Gilson,P2,P10,Bioht 51,70 48,80 44,50 

A40UB 0,5 - 10µl Eppend. 0,5-10µl 51,70 48,80 44,50 

A20UB 0,5 - 20µl Universal 51,70 48,80 44,50 





A350UB 1,0 - 350µl Finn,Capp 51,70 48,80 44,50 

A1000UB 100 -1000µl Universal 54,30 51,75 47,60 

Quali - MAXYMUM RECOVERY Tips mit ultraglatter Oberfläche, sterile Filterspitzen im Rack 

Maximale DNA Ausbeuten, minimale DNA Denaturierung - Höchste Genauigkeit und Präzision durch 

Oberflächenoptimierung - Kostenreduzierung von 10-15% durch Einsparung beim Enzymverbrauch 

1 VE = 10x96 Tips im Rack 1-4 VE 5-9 VE 10 VE 


A300S-MR 0,1 - 10µl Gilson P2, P10 67,00 63,00 59,90 

A400S-MR 0,5 - 10µl Eppend.0,5-10µl 67,00 63,00 59,90 

A20S-MR 0,5 - 20µl universal 67,00 63,00 59,90 



A1000S-MR 100 - 1000µl universal 69.00 67,00 63,00 

VALUE LINE, sterile Filterspitzen im Rack 

DNase-, RNase-, Pyrogen- und Metall frei, Hydrophobe, additivfreie Filterspitzen zur Aerosol – 

Eliminierung, konformitätsbescheinigt, Graduierung bei 10, 50 und 100µl für die 20, 50, 100 und 

200µl Spitze 

1VE = 10 x96 Tips 1-4 VE 5 -9 VE 10 VE 

file:///F|/Kisker/Kisker/deutsch/filter.htm (2 von 3) [08.12.2005 22:30:30]



VL300S 0,1 - 10µl Gilson P2, P10, Biohit,Rainin EDP-2 52,00 49,60 47,00 

VL400S 0,5 - 10µl Eppend. 0,5-10µl, Socorex,Nichirio 52,00 49,60 47,00 

VL20S 0,5 - 20µl Eppend. Gilson, Bioh Brand,Socorex 52,00 49,60 47,00 




VL1000S 100 - 1000µl Eppend. Gilson, Bioh Brand,Socorex 54,00 51,60 49,00 

Quali - Roboter Filterspitzen für Beckman Biomek und Multimek 

Passend für Laborautomaten garantieren sie absolute Kompatibilität. Die Filterspitzen passen luftdicht zu den jeweiligen 

Systemen für exakte Dispergierschritte, zertifiziert DNase-, RNase- und Pyrogen frei. Aufnahme und Abgabe der 

komplette Probenmenge 

Kat. # Volumen Passform Pack.einheit Euro 

ABB-20 20µl Beckman Biomek 50 Racks á 96 tips 485,00 



ABM-50 50µl Beckman Multimek 50 Racks á 96 tips 495,00 


Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/filter.htm (3 von 3) [08.12.2005 22:30:30]





Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

You like to order simultaniously while scanning our catolog? Click here to 

open a second window and type in your choice. 


Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Our hydrophobic filter tips eliminate aerosols completly. The tips are sterilized by 

gamma-radiation and are important to avoid cross-contaminations of sample fluids 

or vapors from contacting the pipettors shaft. Especially important is theuse of filter 

tips with all PCR-techniques , where contamination with unwanted DNA through the 

pipettor can lead to wrong results. Also the filter tip protects the pipettor, if you are 

handling with radioactice, corrosive or biohazardous samples. The tips have the 

beveled form for absolutly precision and are certified DNase-, RNase- and pyrogen 

free! 


Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 

For a printing version of this page click on 

the printer symbol 

1 unit = 10x96 tips racked 1-4 units 5-9 units 10 units 

Cat. # Volume Compatibility Euro Euro Euro 

A300S 0,1 - 10µl Gilson P2 P10 62,95 59,85 54,75 

A300SLong 0,1 - 10µl Gils.P2,P10,Epp. 89,80 -- -- 

A250S 0,1 - 2,5µl Epp.0,1-2,5µl,P2 89,80 -- -- 

A400S 0,5 - 10µl Eppend.0,5-10µl 62,95 59,85 54,75 






A350S 1,0 - 300µl Finn,Capp 62,95 59,85 54,75 

A1000S 100 - 1000µl Universal 68,00 (10x100) 63,95 57,95 


file:///F|/Kisker/Kisker/filter.htm (1 von 3) [08.12.2005 22:30:31] 

Microparticles


These filter tips feature same characteristics as above, but are not sterilized by gamma-radiation. They are 

produced and packed under clean room conditions and are also certified DNase-, RNase- und pyrogen 

free. If necessary the filter tips can be sterilized by autoclaving without damaging the filter using following 

procedure: at 120°C under 15 PSI for 10-15minutes. Do not exceed as excess exposure to autoclaving 

heat may cause decreased structural integrity. 

1 unit = bag / 1000 1-4 units 5 -9 units 10 units 











Quali - MAXYMUM RECOVERY Filter-Tips with ultra-smooth surface, sterile in racks 

With the emergence of PCR, HTS and DNA-Sequencing reliable sample preparation and delivery 

methods have become a critical issue. MAXYMUM RECOVERY Tips show much better results than 

standard tips, fluid retained by the MAXYMUM RECOVERY Tip is 5 - 6 fold lower than any other tip 

tested. MAXYMUM RECOVERY Tips are produced through a modification of the original pp resin 

and do not include any silicons or additives. The Tips are certified to be free of DNase-, Rnase- and 

pyrogen 




*..cost reduction of 10-15% through getting an extra number of pipettings and saving of enzymes 

and other reagents. 

1 unit = 10x96 Tips in racks 1-4 units 5-9 units 10 units 

Cat. # Volume compatibility Euro Euro Euro 








file:///F|/Kisker/Kisker/filter.htm (2 von 3) [08.12.2005 22:30:31]


DNase-, RNase-, Pyrogen- and metall free, hydrophobe, additive free filtertips to eliminate 

aerosoles, conformity confirmed, graduated at 10, 50 and 100µl for the 20, 50, 100 und 180µl tip 

1VE = 10 x96 Tips 1-4 units 5 -9 units 10 units 

Kat. # Volume compatibility Euro Euro Euro 

VL300S 0,1 - 10µl Gilson P2, P10, Biohit,Rainin EDP-2 52,00 49,60 47,00 

VL400S 0,5 - 10µl Eppend. 0,5-10µl, Socorex,Nichirio 52,00 49,60 47,00 





VL1000S 100 - 1000µl Eppend. Gilson, Bioh Brand,Socorex 54,00 51,60 49,00 


Our robotic filter tips are made to exact dimensions of OEM tips to ensure automation compatibility. The robotic filter tips 

are offered in different volume sizes for Beckman Biomek and Zymark robotors. They ensure an airtight seal to your 

robotic system for accurate dispensing and are as our other filter tips certified DNase-, RNase- and pyrogen free. The 

robotic filter tips are "low retention" tips, to make sure, that full amounts of samples like DNA or Proteins are captured for 

more reliable results. 

Cat. # Volume Compatibility packaging Euro 






file:///F|/Kisker/Kisker/filter.htm (3 von 3) [08.12.2005 22:30:31] 

Top of Page

Kisker-Biotech - Pipet Tips 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

For many application, especially in molecular biological and immunological applications the quality 

and accuracy of a tip is very important. With our tips you get the highest available quality and 

reproducability for your experiments: 

* the chemistry: 99,9% pure polypropylen, metall free, and free of lubricants, dyes or fillers 

* the production: in high diamond polished forms without use of contaminating releasing fluids during 

the manufactoring, which results in a transparent product and reduces the adherance of liquid to the 

surface 



* the bevel: the angel on our beveled tips reduces the surface area of the tip orfice with the receiving 

vessel. This angel combined with an ultra-thin orfice reduces the effect of liquid samples creeping up 

the side of the tip ( capillary effect). By reducing this capillary effect our tips dispense more accurate. 

* Compatibility: the beveled tips are fitting to a wide range of pipettors and ideal for labs with multiple 

brands of pipettors. 

The universal grip design and the flexible material with a serie of bands produce a positive seal. 

GC.TIP 0,1-10µl: Gilson P2 & P10, Eppendorf Res./Ref. 2,5µl & 10µl, Finn 2µl, Biohit Multichannel 

10µl, Benchmate 2 & 10µl, Denville DP-2/DP-10 


T005: Finn Multichannel 50-300µl, Capp Aero 50-300µl, Biohit Multichannel 50-250µl 



& DNA 

Measurement 



1-19 units 20 units+ 40 units + 

Cat. # / packaging Volume / color Euro Euro Euro 

GC.TIPS.B / bag-1000 0,1-10µl / clear 14,85 14,30 13,55 

GC.TIPS.R/ rack-10x96 0,1-10ml / clear 29,10 27,50 25,50 

EC.TIPS.B / bag-1000 0,5-20µl / cleat 14,85 14,30 13,55 

EC.TIPS.R /rack-10x96 0,5-20µl / clear 29,10 27,50 25,50 

T002B / bag-1000 1-200µl / yellow 15,30 14,50 13,55 

T002B.R / rack-10x96 1-200µl / yellow 29,10 27,50 25,50 


T005B / rack-10x96 1-300µl / yellow 35,30 33,50 31,85 

T004B / Bag-1000 100-1000µl / blue 15,75 15,00 14,30 

T004BR / Rack-10x100 100-1000µl / blue 36,80 35,00 33,20 

Sterile Tips, "bevelled" Low Retention 

file:///F|/Kisker/Kisker/pipet.htm (1 von 6) [08.12.2005 22:30:33] 

Microparticles


Many applications require sterile techniques. Highest quality and passform garant 

reproducability of your experiments 





Cat. # / packaging Volume / color Pack.unit Euro 

T002B.R-SMR / Rack-10x96 1-200µl / clear 10 racks of 96 tips 39,90 



These Tips are 100% compatibel with Eppendorf-Tips in the corresponding volume and can be used without 

problems in Eppendorf Racks. Highest quality and passform garant reproducibility of your experiments 







ETY02.B 1-200µl / gelb 2 x 500 tips 14,85 

ETY02.R 1-200µl / gelb 10 racks of 96 tips 29,95 

ETB04.B 100-1000µl / blau 2 x 500 tips 16,90 

ETB04.R 100-1000µl / blau 12 racks of 96 = 1.152 tips 47,90 


Our 'Low Retention' tips replace the formerly siliconized tips. They are made from high pure 

polypropylene. The 20µl & 1000µ siliconized tips are beveled, to increase the precision. The 'Low 

Retention' is based on a a new technology production, where no silicone is added during or after the 

production, which could disturb in any experiments. This process causes extremly smoth tips and 

minimises liquid retention. The result is 60% better as with siliconized tips. This product gives the 

confidence, that the full amount of DNA, enzymes or proteins is captured for testing purposes and 

provides more reliable results. 

The tips are fully autoclavable and certificated DNase-, RNase-, pyrogen- and metall free. 

Compatibility: the "bevelled" Tips fit to a wide range of pipettors and are very useful for labs using 

different brands of pipettors in same lab. 

GC.TIP 0,1-10µl: Gilson P2 & P10, Eppendorf Res./Ref. 2,5µl & 10µl, Finn 2µl, Biohit Multichannel 

10µl, Benchmate 2 & 10µl, Denville DP-2/DP-10/DP-8-10 






GC.TIPS.BSi/bag-1000 0,1-10µl / clear 19,40 17,95 16,50 

GC.TIPS.RSi/rack-10x96 0,1-10µl / clear 35,55 33,50 29,15 

EC.TIPS.BSi/bag-1000 0,5-20µl / clear 19,40 17,95 16,50 

EC.TIPS.RSi/rack-10x96 0,5-20µl / clear 35,55 33,50 29,15 

T002BSi/ bag-1000 1-200µl / clear 19,40 17,95 16,50 

T002B.RSi / rack-10x96 1-200µl / clear 35,55 33,50 29,15 

file:///F|/Kisker/Kisker/pipet.htm (2 von 6) [08.12.2005 22:30:33]


T004BSi / Bag-1000 100-1000µl / clear 19,95 18,90 17,90 

T004BRSi /Rack-10x100 100-1000µl / clear 44,90 42,00 39,30 


With this product line we offer very economical tips for standard applications. The new tip VL700G 

could be improved in quality and shows now graduation. Standard yellow tips are offered as bulk 

packs only in bags of 1000 Tips and in racks. The blue tips are extra long (86mm), which allows to 

sample manipulation in deeper tubes. 



VL004G: Gilson P1000, Biohit Proline, Eppendorf Res./Ref. 1000µl, Biohit, Socorex, Brand a.o. 


Cat. # Volume / Color Euro Euro Euro 

VL700G 1- 200µl / yellow 5,95/1000 5,65 4,95 

VL700GR 1- 200µl / yellow 25,00/10x96 23,00/10x96 21,00/10x96 

VL004G 200- 1000µl / blue 7,30/1000 6,95 6,25 

VL004SHO 


200- 1000µl / blau, shortstandard 

7,30/1000 6,95 6,25 

Save time and place. Our most used tipe are now also available as StackRacks an. The used tips are 

"bevelled“, autoclavable, certified DNase-, RNase-, pyrogen free and very useful for multichannel pipettors. 

Easy to use: 5 Racks with 96 tips each are stacked together.Use the first one and find next ready to use 

below. 

Cat. # Volume / Color Unit Euro 

GC.TIPS.STK 0,1-10µl / clear 10 stacks with 5 racks = 4,800 tips 149,00 

T200-Y-STK 1- 200µl / yellow 10 stacks with 5 racks = 4,800 tips 129,00 

Quali - Robotic Tips, clear 

Our robotic tips are made to exact dimensions of OEM tips to ensure automation compatibility.Like all our tips, 

our robotic tips ensure an airtight seal to your robotic system for accurate dispensing. These tips are cerfified 

DNase-, RNase- and pyrogen free. 

Cat. # tip type packaging Euro 

RB-B20 20µl, Beckman Biomek 10 bags á 1000 tips 175,00 

RB-R20 20µl, Beckman Biomek 50 racks á 96 tips 199,00 

RB-RS20 20µl, Beckman Biomek 50 racks á 96 tips 239,00 






RB-RS250 250µl, Beckman Biomek 50 racks á 96 tips, steril 239,00 





RBW-R250 250µl, B.Biomek, wide bore 50 racks á 96 tips 199,00 

RBFX-R20 20µl, Beckman Biomek FX 50 racks á 96 tips 199,00 

RBFX-RS20 20µl, Beckman Biomek FX 50 racks á 96 tips, steril 219,00 



RBFX-R384 0,5-30µl, Beckman Biomek FX 50 racks á 384 tips 2.792,00 

RBFX-RS384 0,5-30µl, Beckman Biomek FX 50 racks á 384 tips, steril 2.792,00 



RBMM-R50 50µl, Beckman Multimek 50 racks á 96 tips 199,00 


RBM-R20 20µl, Packard Mini-/PlateTrak 50 racks á 96 tips 219,00 



RBMP-R20 20µl, Packard Multiprobe 50 racks á 96 tips 259,00 



RQ-R300 300µl, Qiagen 50 racks á 96 tips 346,00 


RT-R50 50µl, Tecan GenMate 50 racks á 96 tips 344,00 

RT-R250 250ml, Tecan GenMate 50 racks á 96 tips 479,00 

Quali - Roboter Tips, Low Retention with and without Filter 

The 'Low Retention' is based on a a new technology production, where no silicone is added during or after 

the production, which could disturb in any experiments. This process causes extremly smoth tips and 

minimises liquid retention. 

- available also as sterile Filtertips to avoid cross-contaminations 

- certified DNase-, RNase- und pyrogen free 

Cat. # tip type Pack.unit Euro 

RB-B20-MR 20µl, Beckman Biomek 10 bags á1000 tips 191,00 

RB-R20-MR 20µl, Beckman Biomek 50 racks á96 tips 239,00 

RB-RS20-MR 20µl, Beckman Biomek 50 racks á96 tips, steril 289,00 







RBFX-R20-MR 20µl, Beckman Biomek FX 50 racks á96 tips 199,00 

RBFX-RS20-MR 20µl, Beckman Biomek FX 50 racks á96 tips, steril 219,00 







RBP-R50-MR 50µl, Packard Minitrack 50 racks á96 tips 259,00 

RBP-R200-MR 200µl, Packard Minitrack 50 racks á96 tips 259,00 

ABB20S-MR 20µl, Beckman Biomek 50 racks á96 filtertips, steril 555,00 

ABB50S-MR 30µl, Beckman Biomek 50 Racks á96 Filtertips, steril 555,00 

ABB180S-MR 165µl, Beckman Biomek 50 racks á96 filtertips, steril 555,00 

ABFX20S-MR 20µl, Beckman Biomek FX 50 racks á96 filtertips, steril 479,00 



ABMM50S-MR 30µl, Beckman Multimek 50 racks á96 filtertips, steril 429,00 

ABMM180S-MR 165µl, Beckman Multimek 50 racks á96 filtertips, steril 429,00 

ABPM20S-MR 20µl, Packard MiniTrack 50 racks á96 filtertips, steril 479,00 



Quali - Roboter Tips, conductiv ( black ) 

Mit der Einführung dieser Spitzen entsprechen wir vielfachen Kundenwünschen. Konduktiv-schwarze 

Spitzen stehen jetzt auch für Canberra Packard I, II und IIEX sowie Beckman Span 8 zur Verfügung. 

Für den Beckman Span 8 bieten wir zusätzlich konduktiv-schwarze sterile Filterspitzen an. Alle 

Spitzen sind zertifiziert DNase-, RNase- und pyrogenfrei 


RBK-SP-20 20µl, Beckman Span-8 50 Racks á96 Tips 499,00 

RBK-SP-S-20 20µl, Beckman Span-8 50 Racks á96 Tips, steril 539,00 


RBK-SP-S-50 50µl, Beckman Span-8 50 Racks á 96 Tips, steril 539,00 

RBK-SP-250 250µl, Beckman Span-8 50 Racks á 96 Tips 499,00 


RBK-SP-FS-20 20µl, Beckman Span-8 50 Racks á96 Filtertips, steril 599,00 



PMK-20 20µl, Packard Multiprobe 50 Racks á96 Tips 385,00 

PMK-S-20 20µl, Packard Multiprobe 50 Racks á96 Tips, steril 435,00 





PMK-R250 250µl, Packard Multiprobe 50 Racks á96 Tips 345,00 



RQK-300 300µl, Qiagen 50 Racks á96 Tips 486,00 

RQK-S-300 300µl, Qiagen 50 Racks á96 Tips, steril 563,00 



RTK-20 20µl, Tecan Style 50 Trays á96 Tips 466,00 



PMK-T20 20µl, Packard Multiprobe 50 Trays á96 Tips 345,00 


file:///F|/Kisker/Kisker/pipet.htm (6 von 6) [08.12.2005 22:30:33] 

Top of Page


Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Mikrovolumen Spitzen und "bevelled" Tips 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Für viele Anwendungen, speziell in der Molekularbiologie und Immunologie sind Qualität und 

Genauigkeit der Spitzen extrem wichtig. Unsere Spitzen sind von höchster Qualität, um die 

Reproduzierbarkeit Ihrer Experimente zu gewähren: 

Die Vorteile: 

die Chemie: 99,9% reines Polypropylen, Metall frei, und frei von Zusätzen, Farb-/Füllstoffen die 

Produktion: in hoch polierten Formen ohne Zusatz von kontaminierenden Flüssigkeiten. 

die Spitzenform: exakte Passform - exakte Spitzenöffnung und Transparenz 

die Biologie: DNase-, RNase-, Pyrogen frei der "bevel"Tips, der Winkel der Spitze reduziert die 

Oberfläche der Spitzenöffnung und reduziert kombiniert mit ultradünner Öffnung den Kapillareffekt,. 

das pipettierte Probenvolumen ist genauer. 

die Passform: die "bevelled" Tips passen zu einer großen Anzahl von Pipetten und sind ideal für 

Labors mit unterschiedlichen Marken. 

GC.TIP 0,1-10µl: Gilson P2 & P10, Eppendorf Res./Ref. 2,5µl & 10µl (20µl), Finn 2µl, Biohit 

Multichannel 10µl, Benchmate 2 & 10µl, Denville DP-2, DP-10 


T002/T004: universal zu allen gängigen Pipetten passend 


1-19 VE 20 VE+ 40 VE + 

Kat. # / Pack.einheit Volumen / Farbe Euro Euro Euro 

GC.TIPS.B / Beutel-1000 0,1-10µl / klar 14,85 14,30 13,55 

GC.TIPS.R/ Rack-10x96 0,1-10ml / klar 29,10 27,50 25,50 

EC.TIPS.B / Beutel-1000 0,5-20µl / klar 14,85 14,30 13,55 

EC.TIPS.R /Rack-10x96 0,5-20µl / klar 29,10 27,50 25,50 

T002B / Beutel-1000 1-200µl / gelb 15,30 14,50 13,55 

T002B.R / Rack-10x96 1-200µl / gelb 29,10 27,50 25,50 

T005B / Beutel-1000 1-300µl / klar 16,80 15,95 15,20 

T005B / Rack-10x96 1-300µl / klar 35,30 33,50 31,85 

T004B / Beutel-1000 100-1000µl / blau 15,75 15,00 14,30 

T004BR / Rack-10x100 100-1000µl / blau 36,80 35,00 33,20 

Sterile Pipettenspitzen, "bevelled" Low Retention 

file:///F|/Kisker/Kisker/deutsch/pipet.htm (1 von 6) [08.12.2005 22:30:34] 

Microparticles


Verschieden Anwendungen, wie z. B. Zellkultur, erfordern sterile 

Atbeitsbedingungen. Höchste Qualität und Passform gewähren die 

Reproduzierbarkeit Ihrer Experimente: 

99,9% reines Polypropylen, Metall frei und frei von Zusätzen, Farb-/Füllstoffen 

exakte Passform - exakte Spitzenöffnung und Transparenz 

Low Retention für vollkommenen Probenauslauf 

DNase-, RNase-und pyrogenfrei 

Kat. # Volumen / Farbe Pack.einheit Euro 

T002B.R-SMR / Rack-10x96 1-200µl / klar 10 Racks á 96 Tips 39,90 

T004B.R-SMR / Rack-10x100 100-1000µl / klar 10 Racks á 96 Tips 43,80 

Pipettenspitzen - Eppendorf kompatibel 

Diese Spitzen sind 100% kompatibel mit Eppendorf-Pipetten entsprechender Volumenbereiche und können 

problemlos in den Eppendorf Racks eingesetzt werden. Höchste Qualität und Passform gewähren die 


99,9% reines Polypropylen, Metall frei, und frei von Zusätzen, Farb-/Füllstoffen 



Graduierung zu Überprüfung des pipettierten Volumens 

problemloser Einsatz in der Eppendorf Arbeitsbox 


ETY02.B 1-200µl / gelb 2 x 500 Tips 14,85 

ETY02.R 1-200µl / gelb 10 Racks á 96 Tips 29,95 

ETB04.B 100-1000µl / blau 2 x 500 Tips 16,90 

ETB04.R 100-1000µl / blau 12 Racks á 96 = 1.152 Tips 47,90 

Quali - Tips, "Low Retention" Spitzen ( Maxymum Recovery Spitzen ) 

Unsere "Low Retention" Spitzen (Maxymum-Recovery-Spitzen) sind aus hochreinem Polypropylen 

gefertigt, autoklavierbar und unterliegen einer ständigen Qualitätskontrolle. Die Spitzen sind konisch 

zulaufend (200µl und 1000µl "bevelled"), um die Präzision zu erhöhen. 

Die Produktion von "Low Retention" Spitzen basiert auf einem neuen Verfahren ohne Zusätze von 

Silikon, welches in Experimenten stören könnte. Der Effekt sind extrem glatte Oberflächen und 60% 

bessere Ergebnisse als mit silikonisierten Spitzen. 

Beim Einsatz im Mikroliterbereich, insbesondere bei der PCR und anderen molekularbiologischen 

Anwendungen, aber auch bei quantitativen Versuchen, bei denen es auf Präzision ankommt, bieten 

diese Spitzen das Optimum an Genauigkeit und garantieren, dass DNA, Enzyme und Proteine ohne 

Verlust pipettiert werden können. 

Die "Low Retention" Spitzen sind zertifiziert DNase-, RNase-, Pyrogen frei! 

Passformen siehe vorherige Produktgruppe "Mikrovolume und bevelled" Tips 

1-19 VE 20 VE+ 40 VE + 


GC.TIPS.BSi/Beutel-1000 0,1-10µl / klar 19,40 17,95 16,50 

GC.TIPS.RSi/Rack-10x96 0,1-10µl / klar 35,55 33,50 29,15 

EC.TIPS.BSi/Beutel-1000 0,5-20µl / klar 19,40 17,95 16,50 

EC.TIPS.RSi/Rack-10x96 0,5-20µl / klar 35,55 33,50 29,15 

T002BSi/ Beutel-1000 1-200µl / klar 19,40 17,95 16,50 

T002B.RSi / Rack-10x96 1-200µl / klar 35,55 33,50 29,15 

T004BSi / Beutel-1000 100-1000µl / klar 19,95 18,90 17,90 

T004BRSi /Rack-10x100 100-1000µl / klar 44,90 42,00 39,30 

file:///F|/Kisker/Kisker/deutsch/pipet.htm (2 von 6) [08.12.2005 22:30:34]


Quali - Standard Spitzen, graduiert 

Mit dieser Produktlinie bieten wir preiswerte Spitzen guter Qualität für Standardanwendungen an. Die 

neue Spitze "VL700G" bieten wir jetzt in erheblich verbesserter Qualität wie z.B. mit Graduierung an. 

Die 1000µl-Spitze ist im Vergleich zu herkömmlichen Spitzen deutlich länger (86mm) und ermöglicht 

die Probenentnahme auch aus längeren Röhrchen. 

Die Spitzen passen zu: VL700G: Gilson P20,P100,P200, Nichirio, Socorex, Eppendorf, Biohit Proline 

u. a. VL004G:Gilson P1000; Eppendorf Res./Ref. 1000µl; Biohit; Socorex; Brand u.a. 

1VE = 1000 Tips 1-19 VE 20 VE+ 50 VE+ 

Kat. # Volumen / Farbe Euro Euro Euro 

VL700G 1- 200µl / gelb 5,95/1000 5,65 4,95 

VL700GR 1- 200µl / gelb 25,00/10x96 23,00/10x96 21,00/10x96 

VL004G 200- 1000µl / blau 7,30/1000 6,95 6,25 

VL004SHO 

StackRacks - die Platzsparer 

200- 1000µl / blau, kurzstandard 

7,30/1000 6,95 6,25 

Sparen Sie Zeit und Lagerplatz. Unsere meist verwendeten Spitzen bieten wir jetzt auch als Stapelracks an. 

Die verwendeten Spitzen aus unserem "Mikrovolumen und bevelled" Spitzen Progamm sind mit allen 

gängigen Pipetten kompatibel. Jeweils 5 Racks á96 Spitzen sind übereinander gestapelt. Nach Verbrauch der 

ersten Lage, steht die nächste gleich zur Verfügung. 

Die Spitzen sind zertifiziert DNase-, RNase-, pyrogen- und metallfrei. 

Die Racks bieten hervoragende Stabilität, das System ist auch für Mehrkanalpipetten bestens geeignet und 

ist vollständig autoklavierbar. 


GC.TIPS.STK 0,1-10µl / klar 10 Stapel á5Racks=4800 Spitzen 149,00 

T200-Y-STK 1-200µl / gelb 10 Stapel á5Racks=4800 Spitzen 129,00 

Quali - Roboter Tips, klar 

- entsprechend den exakten Maßen der Laborautomaten für absolute Kompatibilität 

- zertifiziert DNase-, RNase- und pyrogenfrei 

neu: 250µl mit weiter Spitzenöffnung und Spitzen im 384-well Format 

Kat. # Spitzentyp Pack.einheit Euro 

RB-B20 20µl, Beckman Biomek 10 Beutel á1000 Tips 175,00 

RB-R20 20µl, Beckman Biomek 50 Racks á96 Tips 199,00 

RB-RS20 20µl, Beckman Biomek 50 Racks á96 Tips, steril 239,00 









RBW-R250 250µl, B.Biomek, wide bore 50 Racks á96 Tips 199,00 

RBFX-R20 20µl, Beckman Biomek FX 50 Racks á96 Tips 199,00 



RBFX-RS20 20µl, Beckman Biomek FX 50 Racks á96 Tips, steril 219,00 



RBFX-R384 0,5-30µl, Beckman Biomek FX 50 Racks á384 Tips 2.792,00 

RBFX-RS384 0,5-30µl, Beckman Biomek FX 50 Racks á384 Tips, steril 2.792,00 



RBMM-R50 50µl, Beckman Multimek 50 Racks á96 Tips 199,00 


RBM-R20 20µl, Packard Mini-/PlateTrak 50 Racks á96 Tips 219,00 



RBMP-R20 20µl, Packard Multiprobe 50 Racks á96 Tips 259,00 



RQ-R300 300µl, Qiagen 50 Racks á96 Tips 346,00 


RT-R50 50µl, Tecan GenMate 50 Racks á96 Tips 344,00 

RT-R250 250ml, Tecan GenMate 50 Racks á96 Tips 479,00 

Quali - Roboter Tips, Low Retention mit und ohne Filter 

-"Low Retention" für optimalen Spitzenauslauf, daher minimaler Probenverlust 

- auch als sterile Filterspitze zur Vermeidung von Kreuzreaktionen lieferbar 



RB-B20-MR 20µl, Beckman Biomek 10 Beutel á1000 Tips 191,00 

RB-R20-MR 20µl, Beckman Biomek 50 Racks á96 Tips 239,00 

RB-RS20-MR 20µl, Beckman Biomek 50 Racks á96 Tips, steril 289,00 







RBFX-R20-MR 20µl, Beckman Biomek FX 50 Racks á96 Tips 199,00 

RBFX-RS20-MR 20µl, Beckman Biomek FX 50 Racks á96 Tips, steril 219,00 





RBP-R50-MR 50µl, Packard Minitrack 50 Racks á96 Tips 259,00 







ABFX20S-MR 20µl, Beckman Biomek FX 50 Racks á96 Filtertips, steril 479,00 



ABMM50S-MR 30µl, Beckman Multimek 50 Racks á96 Filtertips, steril 429,00 


ABPM20S-MR 20µl, Packard MiniTrack 50 Racks á96 Filtertips, steril 479,00 



Quali - Roboter Tips, konduktiv ( schwarz ) 

Mit der Einführung dieser Spitzen entsprechen wir vielfachen Kundenwünschen. Konduktiv-schwarze 

Spitzen stehen jetzt auch für Canberra Packard I, II und IIEX sowie Beckman Span 8 zur Verfügung. 

Für den Beckman Span 8 bieten wir zusätzlich konduktiv-schwarze sterile Filterspitzen an. Alle 

Spitzen sind zertifiziert DNase-, RNase- und pyrogenfrei 





























Seitenanfang 


Kisker-Biotech- Gel loading tips 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Cell Saver Spitzen 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Die Cell Saver Spitzen haben eine extra große Spitzenöffnung, um den Transfer empfindlicher Zellen zu 

ermöglichen und Zellbeschädigungen zu vermeiden. Wenn Standard oder "bevelled" Spitzen eingesetzt 

werden, können Hybridomas, Hepatozyten oder Makrophagen beschädigt werden, sowie "DNA-shearing" 

genomischer DNA reduziert werden. Die Cell Saver Spitzen sind auch eine Hilfe beim Pipettieren hoch 

viskoser Flüssigkeiten. Die klaren Cell Saver Spitzen werden in Beuteln zu 1000 Spitzen angeboten bzw.in 

Racks auf Anfrage. 

Die Spitzen passen zu allen gängigen Pipettenmarken und sind DNase-, RNase- und Pyrogen frei. 


1 VE = 1000 Tips 1- 4 VE 5 + VE 

Kat. # Volumen Pack.einheit Euro Euro 

CSP250B 1 - 200µl 1 Beutel á 1000 15,00 14,20 



Eine Kombination aus langer Spitze mit sehr feinem Auslass und sehr weichem Pipettenkopf. Der weiche Pipettenkopf passt 

sich mühelos dem Pipettenkonus an, der sichere Sitz sorgt insbesondere in Verbindung mit Mehrkanalpipetten für gleichmäßige 

Befüllung und Entleerung. 

Kat. # Pack.Einheit Euro 

FT-1000 1 Beutel á 1000 63,40 

FT-96 6 Racks á 96 58,20 

Quali - Tips, Gel - Auftrag und Spezialspitzen 


0,5-10µl passed für Eppendorf 0-5-10µl, Gilson P2, Oxford Benchmate, 

Außendurchmesser der Spitze 0,25mm, Länge der Kapillare 22mm, 

Gesamtlänge 62mm 

Kat. # Pack.einheit Euro 

GSI025 1 Rack á 204 Tips 35,90 


1-200µl passend für Eppendorf, Gilson, Finn, Biohit, 

Außendurchmesser der Spitze 0,54mm, Länge der Kapillare 25mm 


GSII054B 1Beutel á 1000 Tips 42,00 

file:///F|/Kisker/Kisker/deutsch/loading.htm (1 von 5) [08.12.2005 22:30:36]


GSII054R 5 Racks á 204 Tips 58,00 

Gel loading Tips mit flacher Spitze "Multiflex" 

Eine ideale Spitze zum Laden von Gelen im Volumenbereich von 0,1-10µl 

und 1-200µl. Verfügbar in zwei Spitzendurchmessern; die 0,37mm und 

0,17mm. 

Die Spitzen sind optimal zum Probenauftrag von Sequenz und SDS-PAGE- 

Gelen. Sie zeichnen sich aus durch höchste Pipettiergenauigkeit, sind 

DNase-, RNase frei und passen zu den meist benutzten Pipetten. 

Kat. # Volumen/ Passform Spitzendicke/Form Pack.einheit Euro 

04NK10 0,1-10µl/ P2, P10 0,37mm/ kurz 4 Racks á 200 198 

02NK10 0,1-10µl/ P2, P10 0,17mm/ kurz 4 Racks á 200 268 

04N200 0,5-200µl/ Gils./Epp 0,37mm/ lang 4 Racks á 200 204,45 

02N200 0,5-200µl/ Gils./Epp 0,17mm/ lang 4 Racks á 200 268 

04N10 0,5-10µl/ Eppend. 0,37mm/ lang 4 Racks á 200 204,45 

02N10 0,5-10µl/ Eppend. 0,17mm/ lang 4 Racks á 200 268 

Akku-Pipettierhilfe 

Diese Pipettierhilfe kann mit allen Pipetten von 0,1 – 100ml benutzt werden. Drei 

Geschwindigkeitseinstellungen für die Ansaug- und Austoßoperation gestalten die Arbeit einfacher 

und komfortabler. Je nach Anforderung bietet die Pipettierhilfe „schnell füllen“ – „langsam ablassen“ 

„langsam ansaugen“ – „schnell ablassen“ sowie weitere Optionen.Durch entsprechende 

Knopfeinstellung wird die gewünschte Pipettiergeschwindigkeit festgelegt. Eine Feinregelung erfolgt 

durch den unterschiedlichen Druck der Bedienerknöpfe. Die Pipettierhilfe ist gegen Überfüllen 

geschützt, die Flüssigkeit kann ohne Motorunterstützung frei ablaufen 

Die Pipettierhilfe ist zur Sicherheit mit Filterelementen ausgestattet, zum Lieferumfang gehört auch 

ein Ladegerät. 

Kat. Nr. Bezeichnung Volumen Euro 

DPH-100 Pipettierhilfe 0,1 – 100ml 1 Stück 299 

Rota-Akku-Pipettierhilfe 

Dies flexible Pipettierhilfe kann zusätzlich zur Standardstellung in einem kurzen Winkel von 7,5° oder 

in einem langen Winkel mit 15° eingestellt werden. Der Griff hat eine speziell behandelte rutschfeste 

Oberfläche und gewährt so eine komfortabele Nutzung in Verbindung mit Handchuhen. Zudem ist 

der Griff sowohl für Rechts- als auch Linkshänder geeignet. 

Die Pipettierhilfe ist geeignet für Glas- oder Plastikpipetten im Volumenbereich von 1 – 100ml. 

Durch entsprechende Knopfeinstellung wird die gewünschte Pipettiergeschwindigkeit festgelegt. Eine 

Feinregelung erfolgt durch den unterschiedlichen Druck der Bedienerknöpfe Pipettennase, -halterung 

und –filter können autoklaviert werden. 

Die Lieferung erfolgt inklusive Pipettenhalterung und Ladegerät. 


DRP-100 Pipettierhilfe 0,1 – 100ml 1 Stück 259 

Denville-Pipetten "XL3000i" 

Mit acht unterschiedlichen Modellen steht eine hochqualitative Pipettenserie im Volumenbereich von 

0,1µl bis 10ml zur Verfügung. Die Vorzüge der Denville - Pipetten auf einen Blick: 

- klassisches Profil, ergonomisches Design und Präzision, 

- Reproduzierbarkeit und Langlebigkeit 

- Volumen stufenlos einstellbar 

- 20% leichter als vergleichbare Modelle 

- Digitalanzeige 

- Tip-Ejektor einstellbar zur Verwendung unterschiedlicher Spitzen-Marken 

- Service-Kit zur Rekalibrierung inklusive 

- abnehmbares Unterteil autoklavierbar 



Kat. Nr. Bezeichnung Unrichtigkeit (%) Volumen Euro 

DP-2 P-2 1-Kanal variables Volumen +/- 12,0 bis 1,5 0,1 – 2µl 159,00 

DP-10 

DP-20 

DP-100 

DP-200 

DP-1000 

DP-5000 

DP-10ml 

P-10 1-Kanal variables 

Volumen 


Volumen 


Volumen 


Volumen 


Volumen 


Volumen 

P-10ml 1-Kanal variables 

Volumen 

+/- 3,6 bis 0,5 0,5 – 10µl 159,00 

+/- 4,0 bis 0,5 2 – 20µl 149,00 

+/- 1,6 bis 0,5 10 – 100µl 149,00 

+/- 1,2 bis 0,5 20 – 200µl 149,00 

+/- 0,9 bis 0,5 100 – 1000µl 149,00 

+/- 0,6 bis 0,5 1000 - 5000µl 169,00 

+/- 2,5 bis 0,5 1000 - 10.000µl 220,00 

Denville-MehrkanalPipetten "XL3000i" mit variabler Volumeneinstellung 

Denvilles XL3000i Mehrkanalpipetten lassen sich komfortabel für Rechts- und Linkshänder benutzen. Die 

Bedienerknöpfe sind ergonomisch und daumenschonend angebracht, der Pipettenschaft kann um 360° gedreht 

werden. Durch die Verwendung von innovativen, leichtgewichtigen Materialien sind auch längere Einsatzzeiten für 

den Anwender unproblematisch. Jeder Kanal der Pipette ist individuell angelegt, um grösste Präzision und 

Reproduzierbarkeit der Pipettierschritte zu garantieren. Die Mehrkanalpipetten sind als 8- und 12-Kanal-Pipetten in 

überlappenden Volumenbereichen erhältlich. 

Die Vorteile im Überblick: 

- bis zu 20 % leicher als vergleichbare Modelle 

- 360° rotierbares Unterteil 

- individuelle Kolben und Spitzenkoni für jeden Führungskanal 


gerundeter Ejektor zur Kraftverminderung 



DP-8-10 8 – Kanal manuell +/- 8.0 bis 2,0 1 - 10µl 499,00 


DP-8-200 8 - Kanal manuell +/- 1.4 bis 0,8 20 - 200µl 499,00 

DP-8-300 8 - Kanal manuell +/- 1.4 bis 0,9 50 - 300µl 499,00 

DP-12-50 12-Kanal manuell +/- 3.0 bis 1,2 5 - 50µl 575,00 



Biohit - Pipetten 

Die Vorzüge der Biohit Proline Pipetten auf einen Blick:* Präzision, reproduzierbare Ergebnisse. und 

Leichtgewichtigkeit * Bauart nach DIN 12650, Konformitätsbescheinigung nach DIN 12600. selbstkalibrierbar, 

kalibrierungsfreie elektronische Pipetten. schneller Liefer- und Reparaturservice und 

Zweijahresgarantie 

Biohit Proline Einkanalpipetten mit variabler Volumeneinstellung 




00720005 1-Kanal variables Volumen 0,1.-.2,5µl 185,00 

00720000 1-Kanal variables Volumen (PCR) 0,5.-.10µl 175,00 

00720080 1-Kanal variables Volumen 2 - 20 µl 175,00 

00720020 1-Kanal variables Volumen 5 - 50µl 175,00 







Biohit Proline Einkanalpipetten mit Festvolumen 

Kat. Nr. Einkanalpipetten Bezeichnung Volumen Euro 

00722001 1-Kanal Festvolumen für 10µl(PCR) 5 µl 89,00 

00722004 1-Kanal Festvolumen für 10µl(PCR) & 300µl Tips 10 µl 89,00 

00722010 1-Kanal Festvolumen 20 µl 89,00 







00722045 1-Kanal Festvolumen 1000µl 89,00 



Biohit Proline Mehrkanalpipetten mit variabler Volumeneinstellung 


00720120 4 - Kanal manuell 5 - 50µl 230,00 

00720130 4 - Kanal manuell 50 – 250µl 230,00 

00720210 8 - Kanal manuell PCR 0,5 - 10µl 350,00 



00720310 12-Kanal manuell 0,5 - 10µl 420,00 

00720320 12-Kanal manuell 5 - 50µl 420,00 

00720340 12-Kanal manuell 50 – 300µl 420,00 

00720370 12-Kanal manuell, hard tip core 50 – 300µl 420,00 

Biohit ePET + elektronische Ein- und Mehrkanalpipetten mit AC-Adapter 



Kat. # Bezeichnung Volumen Euro 

710520ET 1 - Kanal elektronisch 0,2 - 10µl 319,00 

710010ET 1 - Kanal elektronisch 5– 100µl 289,00 

710040ET 1 - Kanal elektronisch 50 – 1200µl 319,00 


710200ET 8 - Kanal elektronisch (PCR) 0,2- 10µl 570,00 

710210ET 8 - Kanal elektronisch 5 - 100µl 519,00 



710300ET 12-Kanal elektronisch 0,2 - 10µl 680,00 

710310ET 12-Kanal elektronisch 5 - 100µl 619,00 

710320ET 12-Kanal elektronisch 25 – 250µl 619,00 

710810ET 12-Kanal elektronisch 50- 1200µl 680,00 

Seitenanfang 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 




The following capillary tips are useful for loading gels as well as for recovery of samples from small orifice containers or tubes. 


0,5-10µl, compatibility: Eppendorf 0-5-10µl, Gilson P2, Oxford Benchmate 

orifice o.d. 0,25mm, lenght of flexible capillary tip 22mm, total lenght 

62mm 

Cat. # Packaging Euro 

GSI025 1Rack á 204 tips 35,90 


1-200µl, compatibility: Eppendorf, Gilson, Finn, Biohit, orifice o.d. 0,54mm, 

lenght of flexible capillary tip 25mm 


GSI054B 1bag á 1000 tips 42,00 

GSI054R 5 Racks á 204 tips 58,00 

Gel loading tips with flat tip, Multiflex 

An ideal tip for gel loading in volume range from 0,1-10µl and 1-200µl. 

Available in two tip widths, the 0,37mm and the 0,17mm tip width is the 

optimum for loading sequencing gels. Fitting to commonly used pipettors, 

Dnase- Rnase free 

Cat. # Volume/ Compatibility Tip width/ form Packaging Euro 

04NK10 0,1-10µl/ P2, P10 0,37mm/ short 4 racks á 200 198 

02NK10 0,1-10µl/ P2, P10 0,17mm/ short 4 racks á 200 268 

04N200 0,5-200µl/ Gils./Epp 0,37mm/ long 4 racks á 200 204,45 

02N200 0,5-200µl/ Gils./Epp 0,17mm/ long 4 racks á 200 268 

04N10 0,5-10µl/ Eppend. 0,37mm/ long 4 racks á 200 204,45 

02N10 0,5-10µl/ Eppend. 0,17mm/ long 4 racks á 200 268 


file:///F|/Kisker/Kisker/loading.htm (1 von 5) [08.12.2005 22:30:37]


The Cell Saver Tips have an extra large tip orfice, to make the transfer of sensitive cells possible without 

damaging the cells. When using standard or "bevelled" tips, hybridomas, hepatocytes or macrophages could 

be damaged. Also the "DNA-shearing" of genomic DNA can be reduced. Cell Saver tips are also helpful 

when pipetting high viscous fluids. The clear Cell Saver tips are supplied in bags of 1000 tips or racks on 

request. 

The do fit to all common pipettors and are DNase-, RNase- and Pyrogen free. 


Cat. # Volume Pack.unit Euro Euro 

CSP250B 1 - 200µl 1 Bag á 1000 15,00 14,20 

CSP100B 100 - 1000µl 1 Bag á 1000 18,20 17,30 


This tip features a unique combination of a very thisn wall and ultra fine tip point. A flexible tip collar offers a particulary good fit 

on most 200 microliter pipettes including multi channel pipettes. 

Cat. # packaging Euro 

FT-1000 1 bag á 1000 63,40 

FT-96 6 racks á 96 58,20 

Akku-Pipettor-help 

This Pipettor-help can be used with all pipettes from 0,1 – 100ml. Three speed modes for suck- and 

blow out operation make the work easy and comfortable. The pipettor help offers for different 

applications „fast fill“ – „slow drain off“ „slow suck“ – „fast blow out“ and further options. Speed will be 

controled by pressing the tigger. The Pipettor help is protected against overfilling, the fluid can can 

also flow out without motor support. 

It is protected by filterelementes, a charger is also in the delivery included. 

Cat. # Description Volume Euro 

DPH-100 Pipettor-Help 0,1 – 100ml 1 Stück 299 

Rota-Akku-Pipettor-help 

This pipett filler combines a powerful motor with a lightweight design. The adjustable pipett nozzle 

rotates to three positions for maximum comfort (standard, 2-7,5!, 3-15°). Wide angel positions are 

better for limited space as under hoods, smal-angel positions work better for benchtop applications. 

The Rota-Filler fits comfortably in right or left hand. Two triggers provide precise control in two 

operation modes, blow out or gravity. 

The filler accomodates glass and plastic pipettes from 1 to 100 ml, a hydrophobic 0.45 micron filter 

preventes contamination. The pp pipet nozzle is autoclavable. 

A red low-battery indicator signals, when to recharge. 

The delivery includes: the filler with two replacement filters,a dual position charging stand and a 

magnetic/wall-mountable holder with screws. 

Cat.# Description Volume Euro 

DRP-100 Rota-Filler 0,1 – 100ml 1 pc 259 




Eight modells cover all volumes from 0,1µl to 10ml. A continuosly adjustable volumeter with digital 

readout allows simple and accurate dispensing. The robust construction along with the low thermal 

coefficient of the body of each XL3000i will prevent hand heat affecting sample measurements and 

reproducibility, even in prolonged usage. Being lighter as many other similiar pipettes, they are even 

more comfortable to hold and operate for extended periods - even in the smallest hand. 


advantages: 







Cat. # Description Accuracy Volume Euro 

DP-2 

DP-10 

DP-20 

DP-100 

DP-200 

DP-1000 

DP-5000 

DP-10ml 

P-2 1-Channel variable 

Volumen 


Volume 


Volume 


Volume 


Volume 


Volume 

P-5000 1-Channal variable 

Volume 

P-10ml 1-Channel variable 

Volume 

+/- 12,0 to 1,5 0,1 – 2µl 159,00 

+/- 3,6 to 0,5 0,5 – 10µl 159,00 

+/- 4,0 bis 0,5 2 – 20µl 149,00 

+/- 1,6 bis 0,5 10 – 100µl 149,00 

+/- 1,2 bis 0,5 20 – 200µl 149,00 

+/- 0,9 bis 0,5 100 – 1000µl 149,00 

+/- 0,6 bis 0,5 1000 - 5000µl 169,00 

+/- 2,5 bis 0,5 1000 - 10.000µl 220,00 


Denvilles XL3000i Multi-Channel Pipettes allow for comfortable pipetting by both right and left hand users. The 

plungers and ejector buttons are ergonomical located and operate smoothly. For comfortable pipetting in any 

direction, the tip manifold rotates 360°. The innovative ejector is curved, allowing the tips to be pushed off in steps, 

therefor reducing the amount of force required for ejection. 

The use of advanced, lightweight materials results in a pipette that will standup for constant use, yet is easy to hold, 

even during extended pipetting session. 

Advantages: 








DP-8-10 8 - Channel manual +/- 8.0 bis 2,0 1 - 10µl 499,00 










The Biohit Proline Pipettes feature:* Precision, reproducable results and low weight * produced after DIN 

12650, conformity certified DIN 12600. selfe-calibrating, calibration free electronische Pipettes. fast delivery 

and repair service and two years warranty 

Biohit Proline EinChannelpipetten mit variabler Volumeneinstellung 

Cat. Nr. Descrition Volume Euro 

720005 1-channel variable Volume 0,1.-.2,5µl 185,00 

720000 1-channel variable Volume 0,5.-.10µl 175,00 

720080 1-channel variable Volume 2 - 20 µl 175,00 

720020 1-channel variable Volume 5 - 50µl 175,00 







Biohit Proline 1-Channel pipettes with Fixed Volumen 

Cat. Nr. Description Volume Euro 

00722001 1-channel fix volume for 10µl(PCR) Tips 5 µl 89,00 

00722004 1-channel fix volume for 10µl(PCR) & 300µl Tips 10 µl 89,00 

00722010 1-channel fix volumen 20 µl 89,00 







00722045 1-channel fix volumen 1000µl 89,00 





00720120 4 - channel manual 5 - 50µl 230,00 


00720210 8 - channel manual 0,5 - 10µl 350,00 





00720310 12-channel manual 0,5 - 10µl 420,00 

00720320 12-channel manual 5 - 50µl 420,00 



Biohit ePET + elektronische MehrChannelpipetten mit AC-Adapter 


710520ET 1 - channnel electronic 0,2 - 10µl 319,00 

710010ET 1 - channnel electronic 5– 100µl 289,00 

710040ET 1 - channnel electronic 50 – 1200µl 319,00 


710200ET 8 - channnel electronic 0,2- 10µl 570,00 

710210ET 8 - channnel electronic 5 - 100µl 519,00 






710810ET 12 - channnel electronic 50- 1200µl 680,00 

file:///F|/Kisker/Kisker/loading.htm (5 von 5) [08.12.2005 22:30:37] 

Top of Page

Kisker-Biotech - PCR Tubes and PCR Plates 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



Quali - qPCR Capillaries 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

The qPCR capillaries are convient to handle and packed as 2 stackracks, 

one with the capillaries and one with the caps. Each pack contains a 

transfer pin, which guarantees easy handling and safe closing of the 

capillaries. To use the capillaries, an reusable rotor-adapter is necessary, 

which is included in the starter-kit. 

The transparent plastic capillaries have several advantages compared to 

usualy used glass capillaries: 

- more cost effective analysis by reduced costs per analysis 

- non breakable, reduces the risk of DNA cross-contaminations by broken glass capillaries 

- no change of method by using glass capillaries instead of, no reduction of sensitivity 

- higher reaction volume, the capillaries can be filled if necessary up to 50 µl reaction mix, e. 

g. by adding higher quantity of sample DNA can increase the sensitivity 

- sample recovery, the special design of aour capillaries allows you to recover the samples 

after the q-PCR by using a 10 µl pipet tip 

- capillaries and caps are DNase-, RNase- and pyrogenfree. 

Kat. # unit Euro 

G-LC-96 10 racks á 96 capillaries and caps, 1 transfer-pin 359,00 

G-LC-Kit 

1 starter kit, including 7 racks with capillaries/caps, 1 transfer-pen and 

rotor-adapter 



& DNA 

Measurement 



497,00 

G-LC-A Rotor-Adapter for Light Cycler 280,00 

G-LC-T transfer-pen 9,80 






bench 


Cat. # Description Unit Euro 

KR-96 IsoFreeze PCR-Rack 2 racks with lid 49,80 

Quali - PCR Tubes, Single PCR Tubes 0,2 and 0,5ml 

file:///F|/Kisker/Kisker/tubes.htm (1 von 19) [08.12.2005 22:30:42] 

Microparticles


Our PCR tubes and strip tubes are specifically designed for use in PCR 

machines and thermal cyclers. The tube walls are ultra thin and consistent, to 

ensure a fast temperature exchange beetween heatingsystem and sample, 

resulting in faster cycles. The ultrathin PCR tubes are made from high pure 

polypropylen in high polished moulds and are free of lubricants, dyes, heavy 

metals or fillers. Like our other PCR products they are certified DNase-, 

RNase-und pyrogen free. The unique tube design and the longer cap form 

and seals compared to other tubes ensures a tight fit and avoids sample 

evaporation. 

The PCR tubes are available with a domed cap or flat cap in clear or colored. 

1 Unit=1000 tubes 1-4 units 5-9units 10+Un. 

Cat. # Volume Cap form/ Color Euro Euro Euro 

G001 0,2ml domed / clear 39,40 36,85 34,30 

G001-A 0,2ml domed / color mix 41,95 39,40 36,85 

G001-B 0,2ml domed / blue 39,90 37,50 35,00 

G001-G 0,2ml domed / green 39,90 37,50 35,00 

G001-O 0,2ml domed / orange 39,90 37,50 35,00 

G001-R 0,2ml domed / red 39,90 37,50 35,00 

G001-V 0,2ml domed / violet 39,90 37,50 35,00 

G001-Y 0,2ml domed / yellow 39,90 37,50 35,00 


G001-F 0,2ml flat / clear 39,40 36,85 34,30 

G001-AF 0,2ml flat / color mix 41,95 39,40 36,85 

G001-BF 0,2ml flat / blue 39,90 37,50 35,00 

G001-GF 0,2ml flat / green 39,90 37,50 35,00 

G001-OF 0,2ml flat / orange 39,90 37,50 35,00 

G001-RF 0,2ml flat / red 39,90 37,50 35,00 

G001-VF 0,2ml flat / violet 39,90 37,50 35,00 

G001 YF 0,2ml flat / yellow 39,90 37,50 35,00 


G050 0,5ml flat / clear 28,90 25,90 23,90 

G050-A 0,5ml Flat / colored mix 31,90 29,80 28,40 



manufactured in high polished moulds and absolutely free of lubricants, dyes, heavy metals or 

fillersforms 


Cat. # Volume Color Unit Euro 

G001-NC 0,2ml transparent 1 x 1000 36,80 

G001-NC-B 0,2ml blue 10 x 1000 395,00 

G001-NC-G 0,2ml green 10 x 1000 395,00 

G001-NC-O 0,2ml orange 10 x 1000 395,00 

file:///F|/Kisker/Kisker/tubes.htm (2 von 19) [08.12.2005 22:30:42]


G001-NC-R 0,2ml ret 10 x 1000 395,00 

G001-NC-V 0,2ml violet 10 x 1000 395,00 

G001-NC-Y 0,2ml yellow 10 x 1000 395,00 


8-strip PCR tubes have same characteristics as the single 0,2ml tubes and are DNase-, RNase 

and pyrogen free. The tubes are supplied in strips of 8 tubes. 

1 unit=125 strips 1-4 units 5-9 units 10+ units 

Cat. # Volume Color Euro Euro Euro 

G002 0,2ml clear 71,10 68,25 63,65 

G002-A 0,2ml colored mix 71,10 68,25 63,65 

10 units: 

G002-B 0,2ml blue -- -- 636,50 

G002-G 0,2ml green -- -- 636,50 

G002-R 0,2ml red -- -- 636,50 

G002-O 0,2ml orange -- -- 636,50 

G002-V 0,2ml violet -- -- 636,50 

G002-Y 0,2ml yellow -- -- 636,50 


1 unit = 125 strips 1-4 units 5-9 units 10 +units 

Cat. # Form Color Euro Euro Euro 

G004 domed clear 16,35 14,85 13,80 

G004-F flat f. RT-PCR clear 25,90 24,90 23,90 

G004-A domed colored mix 16,35 14,85 13,80 

G004-B domed blue -- -- 138,00 

G004-G domed green -- -- 138,00 

G004-R domed red -- -- 138,00 

G004-O domed orange -- -- 138,00 

G004-V domed violet -- -- 138,00 

G004-Y domed yellow -- -- 138,00 


The Tubes are supplied in strips of 8 tubes ( 0,2ml ) and have the advantage, that 

an individual or several tubes can be closed, while others are still open. These 

tubes are also DNase-, RNase- and pyrogen free. 

1-4 units 5+units 

Cat. # Pack size Color Euro Euro 

G003 1 x 120 strips clear, domed cap 92,90 89,00 

G003-A 1 x 120 strips colored mix, domed cap 96,90 92,00 



G003 -F 1 x 120 strips clear, flat cap 61,90 58,80 

0,2ml Low Profile Thin Wall Tube Strip EU (Extreme Uniform) for Éxtraordinary PCR & Real Time 

PCR´ 



thickness diference is only +/- 0,05mm. The low profile of the tube strips improves not only the 

evaporation characteristics but also the light-gain, necessary for ´Real Time PCR´. 

Material 

Highest qualitaties of virgin polypropyle ensures a optimum balance between transparency, impact resistance and gas-tightness. 

These products are DNase-, RNase-, pyrogen free and free of human DNA. 

Cap Strip 

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a minimum. Furthermore, it is 

extremly clear, allowing external monitoring of the tube´s content without opening. The extra wide optical areas ensure the 

highest maximum light transference which improves the minimum detection limit. When using PE Cyclers & Biorad iCycler we 

recommend the use of our ´Low Profile Strip Adapters´. 


Cat. # Description Pack size Euro 

GK79601 EU 8-tube strip, transparent 1 x 120 Stips 49,95 

GK79609 EU 8-tube strip, weiss, für RT-PCR 5 x 120 Strips 249,00 

GK79610 EU 8-tube strip, schwarz, für RT-PCR 5 x 120 Strips 249,00 

GK79701 EU 8-cap strip, transparent 1 x 120 Strips 19,00 

GK77777 Low Profile Strip Adapter 1 adapter 55,00 

0,2ml Thin Wall Tube EU (Extreme Uniformität) 



thickness diference is only +/- 0,05mm. 

Material 

Hochqualitatives Polypropylen garantiert Transparenz und Gasdichtigkeit, die Tubes sind DNase-, RNase-, Pyrogen frei und frei 

von humaner DNA. Die Tubes weisen eine erhöhte Flexibilität auf, die ein Platzen oder andere Beschädigungen unter erhöhten 

Belastungen vermeiden. 

Cap 

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a minimum. The dome like 

shape of the cap improves, in combination with sealing bands, the closure and condensation characteristics, while the flat 

frosted part of the cap may be written on for identification purposes. 

Finally, the cap is equipped with a so - called Ánti-Contamination-Tab´, that eliminates the effect of sample-to-sample carry-over 

generated by manual opening. 



GK79401 EU -tube 0,2ml, transparent 1000 Tubes 38,00 

GK7940F EU -tube 0,2ml, colored 5 x 1000 Tubes / Farbe 199,00 

GK7940F: please advise color: ret, blue, green, yellow, orange or violet, minimum 5000 tubes /color 




This plate fits any regular or RT-Cycler. The flat form can be closed by any 

sealing films of your choice. 

Low-Profile-Plates are recommended in case of small sample volumes, as the 

dead-room will be reduced between sample and heated lid. 

Kat.# Beschreibung Euro/50 Plates Euro/100 Plates 

GK96HIGH PCR-Platte, high-profile transparent 136,00 269,00 

GK96LOW PCR-Platte, low-profile transparent 136,00 269,00 


Our PCR-Plates in microtitre plate format comprises 96 x 0,2ml extra thinwall PCR Tubes, 

which guarantee a fast temperature exchange beetween heating system and sample. 

The PCR Plates are certified DNase- und RNase free and an alternative for laboratories with 

high quantity of samples. The high profile plates can be sealed with sealing films as well as with 

our domed(G004) or flat cap strips(G004-F).The PCR-Plates have an alpha-numeric coding 

system for easy identification and do fit to all comon thermal cyclers. The 96-plates can be 

cutted into smaller section as required. 


Cat.# Format Color Euro Euro Euro 

G030 24 well clear 18,40 71,10 137,55 

G037 32 well clear 18,40 84,35 140,95 

G031 48 well clear 19,95 96,65 148,90 

G032 96 well clear 28,10 139,00 269,00 

G033 96 well sterile clear 45,50 198,80 350,20 

G032-A 96 well colored mix -- 159,00 310,00 

G032-B 96 well blue -- 149,00 295,00 

G032-G 96 well green -- 149,00 295,00 

G032-R 96-well red -- 149,00 295,00 

G032-O 96 well orange -- 149,00 295,00 

G032-V 96 well violet -- 149,00 295,00 

G032-Y 96 well yellow -- 149,00 295,00 


In addition to above PCR plates we offer further alternatives to use with 

other special cyclers. These plates have same features as the above 

described. The full skirt plates are compatible with robotic systems and 

the holes in the skirt allow an exact handling by robotic arms. The extra 

space provided by the skirt can be used for bar code labeling 

The "half skirt" plate, G060H will fit ideal to the Perkin Elmer cyclers 

9600 and 9700, G060/H/1E will fit for all ABI Systems 3700, 3730, 7000, 

7700, 7900, GeneAmp 5700, 9600, 9700 and ideal for ABI 3100 

sequencer. The flat surface simple mounting of sealing films 

. The plate G060H/OA has an elevated skirt on top. 

G060/H-W und G060H-1E-W white plates are especial useful for 

"Lighttyper" Hoffmann-LaRoche. 

All plates (exept G060/H1E-OA) are available in different colors, please 

add the colore-code to the cat.nr. when ordering: B = blue, G = green, R 

= red, O = orange, V = violet, W=white, Y = yellow. 

for sealing options like septa mat and RT-PCR films see sealing options 

for PCR-Plates. 


10 Plates 50 Plates 100 Plates



G060 96 well full skirt transparent 33,25 139,00 269,00 

G060/H 96 well half skirt transparent 33,25 139,00 269,00 

G060/H/1E 

G060/H/OA 

G060/H/SG 


3100 


3100 

96 well half skirted, 

segmented 

transparent 33,25 139,00 269,00 

transparent 33,25 139,00 269,00 

transparent 33,25 139,00 269,00 

XXX-B-G-R-O-V-W-Y 96 well colored 149,00 295,00 

Quali - PCR Plates, 96 Well for ParAllele/Affymetrix System 

These plates are especialy bararecoded for use in MegAllele Genotyping System/Affymetrix GeneChip 

Scanner 3000. 

Cat.# description Color Euro 

50 Plates 

321-63-ANN Anneal PCR Plate transparent 229,00 

321-63-ASY Assay PCR Plate transparent 229,00 

321-63-HYB Hybridization PCR Plate transparent 229,00 

321-63-LBL Label PCR Plate transparent 229,00 

Septa/Tube/Capillaries for ABI PRISM Systems and sealing options for PCR & RT-PCR 

Septa mat (cat.nr. G060/S-3100): made from ultra pure silicon, very flexibel; 

certifizied DNase-, RNase-and pyrogen free, autoclavable- and reusable for 

ABI 3100. 

Septa (cat.nr. G310-S) for 0,5ml tubes for ABI Prism 310 

0,5ml tubes (G310-T) for ABI PRISM 310 

Ultra-Clear-Film (cat.nr.G060/UC-RT): the clearness garants the optical 

analysis during the RT-PCR. The unique pressure sensitive glue does not 

remain any residues on the PCR-plate, which can interfer with the samples. 

RT-PCR-Cap-Strips (cat.nr.G004-F): usable with our PCR-plates and 8-Tube- 

Strips (G002). The flat and high clear cap-surface is useful especialy for RT- 

PCR 

Polyester-Adhesive-Filmfolie (cat.nr. G040): a sealing film for use at short 

time high temperatures, as PCR, or to seal ELISA-Plates 

Thermal-Sealing-Film (cat.nr. G042): a high quality for thermal seal of PCR- 

Plates 

Aluminiumfilm (cat.nr. G071): this paper backed Alu-film is the best sealing for 

wide temperature range, resistent against contact with agressiv reagents, 

useful for the protection of lightsensitive samples 

NEW: cat.nr. G071-P the piercable Aluminium film 

all sealingfilms and cap-strips are DNase- RNase- and pyrogen free, 

dimensions 78 x 120mm + 10mm gripp 

Cat. # Description Application Pack size Euro 

G060/S-3100 Septa Mat ABI 3100 10 mats 75,75 

G310-S Septa f. 0,5ml Tube ABI 310 500 139,00 



G310-T 0,5ml Tube ABI 310 500 42,90 

G310-K47 Capillary 47cm ABI 310 5 253,00 


G060/UC-RT Ultra Clear RT-PCR-Film RT-PCR 100 films 169,80 

G004 Caps, domed f. RT-PCR PCR 125 strips of 8 16,35 

G004-F Caps, flat f. RT-PCR RT-PCR 125 strips of 8 25,90 

G040 Adhesive Film -40°C bis +100°C 100 38,00 

G041 Adhesive Film sterile -40°C bis +100°C 100 55,75 

G042 Thermal Sealing Film -40°C bis +100°C 100 48,55 

G071 

G071-P 

Adhesive Aluminium Film, 

paper backed 

Adhesive Aluminium Film, 

piercable 

-40 bis 135°C 100 24,50 

-40 bis 135°C 100 28,50 

G079 Pressure rol 100 1 29,90 

MiniSealer 

Heat sealing is the most effective method for sealing PCR-Plates (96- and 384 Well) and deep-well/-storageplates. 

Cristallography- and RT-PCR-plates can also sealed with adhesive-films without heat, eliminating 

fingerprints which could disturb optical clarity or view field. 

The MiniSealer table-top sealer is a semi-automated system. It can be used with most brands and sizes of 

plates. 

Operation is simple:the plate is located with the film on top on the stainless steel carrier, set time and 

temperature and press the start button. The heating block is automatically lowered into contact with film and 

plate. Temperature and on hold time are microprocessor controled. When the cycle is complete after 1-4 

seconds, the block is raised, allowing access to the seale plate. 

The system is delivered with an universal support block for SBS footprint plates and a support block for 96well 

half and full-skirt plates. 

Specificationes: dimensiones: 25x43x45 cm, weight 29,5 kg 

Cat. # Description VE Euro 

L085 MiniSealer 1 6.890,00 


alphanumerical identification system 

ultra pure polypropylen 

certified DNase-, Rnase- and pyrogen free 

form-optimized for ABI 3100, 3730, 7000, MJ Research Systeme PTC200 and PTC225. 


Cat. # Color Euro Euro Euro 

G034-ABI transparent 39,90 179,00 319,00 

G034-ABI-A colored mixed -- 209,00 399,00 

G034-ABI-B blue -- 209,00 399,00 

G034-ABI-S black -- 209,00 399,00 

G034-ABI-G green -- 209,00 399,00 

G034-ABI-O orange -- 209,00 399,00 

G034-ABI-R red -- 209,00 399,00 



G034-ABI-V violet -- 209,00 399,00 

G034-ABI-W white -- 209,00 399,00 

G034-ABI-Y yellow -- 209,00 399,00 

384 PCR Plate 

The 384 PCR plate is manufactured for "High Throughput Screening" laboratories. The maximum 

well capacity is 40µl with a working volume of 25µl to accomodate additional DNA replication. The 

384 PCR plate is complete compatible with 384 thermal cyclers, like Perkin Elmer 9700, Techne, 

Hybaid. The surface of the plate is embossed with an alpha-numeric grid for easy well location. The 

conical flat bottom well ensures even aspiration and the clarity of this ultra pure polypropylen is 

unsurpassed. They also can be easily labeled for bar coding in robotersystems. The plates are 




G034 clear 39,90 189,00 329,00 

G035 white -- 219,00 419,00 

G036 black -- 219,00 419,00 

Silicone mats for PCR- and Deep Well Plates 

Our silicon mates are made from ultra pure silicon and therefore very flexible. The mats 

show an alphanumeric grid system corresponding to the microplates for easy identification. 

The piercable selfsealing feature ensures, that evaporation and aerosoles are hindered 

from escaping. 

The mats can be cleaned, autoclaved reused and frozen and are certified DNase-, RNase 

and pyrogen free. 

G068 Compression Mat: garantes vapor lock, avoides evaporation during PCR, also 

usable in conjunction with sealing films 

G078 Expansion-Mat: for Perkin Elmer, seals all tubes in "MicroAmp" Tray. 

Cat. # Use with Unit Euro 

G072 PCR-plate, 96 well 10 46,00 


G074 PCR-plate, 384 deep well 10 49,80 

G078 Expension Mat f. PE Cycler 10 42,00 

G068 Compression mat for PCR-plate 10 42,00 


Thermo Cycler 

G032 96 

Well 

G060 96 Well 

mit Rahmen 

G060H 96 Well mit 

Halbrahmen 

ABI 3100 / 3130 ok 

ABI 3700 / 3730 ok 

G060/H/1E & 

G060/H/OA 96 

Well, Halbahmen 


segmentiert, 

Halbrahmen 


ABI Prism 7000 ok ok ok ok 


ABI Geneamp 

2720/5700 

ok ok ok 


G034-ABI 

384 Well


ABI Geneamp 9600 / 

9700 


Biometra Uno ok ok ok nur G060/H/1E ok 

Uno II ok ok ok 


TGadient ok ok nur G060/H/1E 

TRobot ok ok nur G060/H/1E 

Bio-Rad GeneCycler ok ok 

Icycler ok ok ok ok 

Mycycler ok ok 

Eppendorf 

Mastercycler 


Hybaid Sprint ok ok 

Express ok ok ok ok ok 

Touchdown ok ok ok ok 

Omigene ok ok ok ok ok 

Omn-E ok ok ok ok 

MJ Research 

PTC200 

ok ok ok ok ok ok 


PTC100 ok ok ok ok ok 

MWG Primus 96 ok ok ok 

Primus 384 ok ok ok ok 

PE 9600 ok ok ok ok 

9700 ok ok ok ok ok 

Roche Lighttyper ok ok ok 

Stratagene 

Robocycler 

ok ok ok 

Techne TC-412 ok ok ok ok ok 

TC-512 ok ok ok ok ok 

Beckmann CEQ alle 

Modelle 


These plates are produced from high pure polypropylene, which is autoclavable. The 96 wells are 

compatible with multi-channel pipettors and can be used with roborters. As the plates have 

cylindrcyl walls with round bottom wells, the samples can be repipetted completely, which is not 

possible with square form wells. 

The deep well plates are stackable and cerfified DNase, RNase- pyrogen and metal free, which is 

ideal for DNA/RNA assays and other enzyme tests.The plates are chemical resistant and 

widestand deep temperatures up to - 80°C 

To close plates, we offer different alternatives as our self adhesive PP and Alu films and 

autoclavable and piercable high pure silicon mats. The silicon mats are also freezable and feature 

an alphanumeric grid system. 

Cat.# description material/ color/ pack size Euro 

G069 0,5ml 96 well plate PP/ clear/ 50 plates 137,50 


ok ok




G064 2,0ml 96 Square well plate PP/ clear/ 25 96,90 


Silicon mat: ultra pure silicon, very flexibel, alphanummeric coding system, piercable, 

selfsealing, autoclavable- and reusable. 

Breathable Sealing film: porous adhesiv filmspecialy designed for use in cell and tissue 

culture applications. The film seals all types of microplates andd effectively allows gas 

exchange for cellular or bacterial cultivation, while at same time preventing crosscontamination. 

Cat.# G067 non steril and G067-S steril , dimensions 80x12mm LxW 

PP-Film Cat.Nr. G070: selfsealing film made from PP, suitable tfor sealing tissue culture 

plates, for short term storage and incubation, temperatureresistant from –40 to +80°C, 

Dimensions 78 x 120mm + 10mm Gripp 

Alufilm Kat.Nr. G071: selfsealing, paper backed Aluminium film, temperature resistant from 

–40 to +135°C, dimensions 78 x 120mm + 10mm Gripp 


Cat.# Description Pack size Euro 

G070 PP-Film 100 24,10 

G071 Alu-Film 100 24,60 

G067 Breathable Film 100 69,00 

G067-S Breathable Film 2 x 25 49,00 

G075 for round Deep Wells 1 or 2ml G062/G063 10 39,00 

G076 for quadratic Deep Wells 1 or 2ml G064 10 39,00 

G077 for round Deep Wells 500µl 10 39,00 


A new square well Plate for "HTS and Drug Discovery Labs" , available in 120µl and 240µl 









chemical resistant for storage sample which require use uf strong solvents as DMSO 



Cat.# Description Max. Volume with Siliconmat Pack size Euro 



G384-SQ 384 Imperma-Mat (Silicon) for square wells 10 49,8 

Quali -Glass-Bottom-Plates in 96 - 384 and 1536 Well 



A high quality glass-bottom-plate manufactured according to current SBS-Standards (127,8 x 

85,6 x 14,6mm), which reduces the appearance of autofluorescence in your assay readout to 

less than 5% of the level of unprocessed plastic microtiterplates. 


more accurate measurement due to unmatched flatness< 75µ for 96 and 384 well plate, < 

125µ for the 1536 well plate 

low-base design ensures readability of all wells, especially outer wells 

square well design increases the optical accesible area and well volume - ideal for HTP 

operations 

Main applications: 

fluorescence correlation spectroscopy (FCS) 

Confocal imaging 

Fluorescence polarisation 

Cell-based assays 

Microarrays 

Laser-induced fluorescence 

Cat.# Coating/Sterility Wells/Volume Euro/5 Plates Euro/20 Plates Euro/60 Plates 

GB-96 plain / no 96/500µl 61,00 231,80 660,00 

GB-96 -S plain / yes 96/500µl 108,00 410,40 1.083,00 

GB-96PLL Poly-L-Lysine/yes 96/500µl p.o.r. p.o.r. p.o.r. 

GB-96Co Collagen/yes 96/500µl p.o.r. p.o.r. p.o.r. 

GB-384 plain / no 384/120µl 108,00 410,40 1.111,50 




GB-1536 plain / no 1536/8µl 244,40 928,00 2.508,00 

GB-1536 -S plain / yes 1536/8µl 286,00 1.086,00 2.935,50 






offered in clear PVC non-sterile 

Cat.nr. description Pack size Euro 

R047 Reservoir transparent 10 5,80 


Below is a list of parts as glas-plates, spacers, combs for the automatic sequencer ABI PRISM 

377 


High Volume Combs have more space between the combs and tooth are sharper tapering as 

standard Sharktooth combs 


Sharkgum combs are not sharp tapering, it causes a bigger distance between the lanes 



377-12GP Borosilicate Glass Plate front 12x18cm 1 211,00 



377-12GSP Borosilicate "Step" Glass Plate front* 12x18cm 1 417,00 

377-12GPR Borosilicate Glass Plate rear 12x18cm 1 211,00 

377-24GP Borosilicate Glass Plate front 24cm 1 288,00 

377-24GSP Borosilicate "Step" Glass Plate front* 24cm 1 372,00 

377-24GPR Borosilicate Glass Plate rear 24cm 1 288,00 







377-12SM Spacer, Mylar 12cm x 0,2mm 2 49,90 




377-24ST 24 well Sharktooth Comb, mylar 0,2mm 1 54,00 




377-48STU-02 48 well Sharktooth Comb, mylar 0,2mm, * 1 79,00 


















377-24WF 24 Well-Forming(square) Comb, mylar 0,2mm 1 59,00 







Casting Combs 

377-55SE 5,5mm deep Straight Edge Comb,mylar 0,2mm 1 65,00 




377-73SE-02 7,3mm deep Straight Edge Comb,mylar 0,2mm 1 65,00 

377-73SE-04 7,3mm deep Straight Edge Comb,mylar 0,4mm 1 65,00 

Special Combs 

377-48HVST 

377-64HVST 

377-72HVST 

377-96HVST-02 

377-96HVST-03 

377-96HVST-04 

377-48ELST 

377-64ELST 

377-96ELST 

48 well High Volume Sharktooth Comb, mylar 

0,2mm 


0,2mm 


0,2mm 


0,2mm 


0,3mm 


0,4mm 

48 well Extra Long Sharktooth Comb, mylar 

0,2mm 


0,2mm 


0,2mm 

1 65,00 

1 71,00 

1 71,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

377-32SG 32 well Sharkgum Comb, 0,2mm 1 65,00 




377-64SGU-02 64 well Sharkgum Comb, 0,2mm, * 1 79,00 










This 96-well SBS standard "Sitting Drop" HTP protein crystallography plate is made of optical clear 

polystyrene. The buffer well has a novel D-form geometry located on the right, with the elevated round shape 

protein well located to the left. The plate can be filled manualy with pipettors or with robotic systems. 

The plate is sealed with optical clear sealing films as our Ultra-Clear Film cat.# G060/UC-RT 

To avoid fingerprints on the film, which could interfere with optical clarity, we recommend the use of our semi 

automatic MiniSealer 

Charakteristiks: SBS standard plate with 96 well,sitting drop vapor diffudion protein Crystallisation Plate 

(maximum volume 250 µl, and one corresponding prorein well (maximum 4,3 µl volume 




stackable 



Cat.# Description Eur/VE Eur/VE 

G096-PC Crystallography Plate, 96 Well 84,00/10 395,00/50 

G060/UC-RT Ultra-Clear-Film 169,80/100 

Crystal Recognition Software 

Crystal Recognition Software (CRS) is an automated crystal-detection tool designed for integration in a 

HTP crystallography process. This Software was developed by scientists at the Lawrence Livermore 

National Laboratory (LLNL), participants in one of the nine US-government founded Protein Structure 

Initiative (PSI) centers. CRS can be integrated into any existing imaging system. 

Structural Genomic Process: the typical workflow of protein crystallography involves thousands of tredious 

and time-consuming observations and scoring of crystallisation experiment. In HTP production observing 

and scoring crystallisation experiments quickly becomes the most labor-intensive part of the work load. 

Now, CRS will perform all of the work for you. All you need to do is go see the pictures of the deteced 

crystals and give a final confirmation. 

The CRS provides the following advantages: CRS can be integrated into the imaging sytem of your choice 

increases the precision and speed of detection 

CRS distinguishes the difference between precipitate and crystal 

Easy - to - use 

CRS detects faint, small, and almost invisible crystals that are undetectable by visual inspection 

Fast (operational time of a few seconds) and reliable 

Cost-effective - no need to purchase a new imaging system because CRS can be integrated to your 

existing sytem 

A demo version is available on request. 


G096PC-CRS Crystal Recognition Software on request 

Quali - Microtest-Plates, 96 Well Polypropylene 

These 96-Well-Plates are made from highest quality medical grade polypropylene.They have an ultra-flat 

surface and are compatible with HTS and robotic liquid handling equipment (SBS-standard). Applications: 

sample storage and transport – screening – reagent transfer – HTP and Microtiter assay. 

They feature: 

available in round bottom (500µl), excellent for gentle cell manipulation and V-bottom (450µl) for efficient 

sample collection and manipulation 

raised "chimney" well rims reduce concernes for cross contamination and prodives surface area for effective 

heat and adhesive sealing applications 





Cat.# Description Color Pack size Euro 

G096-U Microtest-Plate, U-Form, 96 Well transparent 50 49,00 

G096-UBB Microtest-Plate, U-Form, 96 Well blue 50 69,00 



G096-UBG Microtest-Plate, U-Form, 96 Well green 50 69,00 

G096-UBR Microtest-Plate, U-Form, 96 Well red 50 69,00 

G096-UBY Microtest-Plate, U-Form, 96 Well yellow 50 69,00 

G096-UBW Microtest-Plate, U-Form, 96 Well white 50 69,00 

G096-UBS Microtest-Plate, U-Form, 96 Well black 50 69,00 

G096-V Microtest-Plate, V-Form, 96 Well transparent 50 49,00 

G096-VBB Microtest-Plate, V-Form, 96 Well blue 50 79,00 

G096-VBG Microtest-Plate, V-Form, 96 Well green 50 79,00 

G096-VBR Microtest-Plate, V-Form, 96 Well red 50 79,00 

G096-VBY Microtest-Plate, V-Form, 96 Well yellow 50 79,00 

G096-VBW Microtest-Plate, V-Form, 96 Well white 50 79,00 

G096-VBS Microtest-Plate, V-Form, 96 Well black 50 79,00 


Made from high our polystyrene, minimum of own fluorescence and highest optical quality. 




Lid orientation corner and condension rings on the lid reduce risk of contamination and condension 


Cat.# Description/Volume in ml/well Euro/100 Plates Euro/1000 plates 

G080-UB U-Form, 0,35 38,90 359,00 

G080-V V-Form, 0,34 38,90 359,00 

G080-F Flatt-botom, 0,41 38,90 359,00 

G080-D Lid 38,90 239,00 

G080-MP6 Makroplate, 6 well, 15 49,90 460,00 


Only optical clear and ultrapure plastics are used in the productionfor our cell- and tissue culure 

plates and have for microscopical examinations an unreached optical clearance. The plates feature: 


condensation rings avoid loss of material and change of osmolarity, no toxic residue from gamma 

sterilisation, 

alphanumeric well identification and lid orientation corners, 



price reductions for call-off orders 


Cat. # Description/volume in ml/well surface area unit Euro 

G080TC-UB TC-Plate, U-form, 0,35 0,35cm2 100 St. 149,90 

G080TC-V TC-Plate, V-form, 0,34 0,28cm2 100 St. 149,90 

G080TC-F TC-Plate, flat, 0,41 0,35cm2 100 St. 149,90 

G080TC-24F TC-Plate, 24 well, flat, 2,9 1,75cm2 100 St. 149,90 

G080TC-6F TC-Plate, 6 well, flat, 15 9,6cm2 100 St. 149,90 




Our petri dishes meet the highest requirements, optical transparency and optical clear for microscopy, high 

thermostability, plain surfaces, formstability and machine sterile production conform to standard-hygienic for 

multipurpose use in bacteriology. The plates are suited for filling of culture-media from automatic machines. 

The petri dishes are machine sterile for bacteriology and gamma sterile for tissue culture, 



Cat. # Form / Sterility Vents Euro / units Euro / units 

G090 not devided / m-sterile no 49,00 / 480 624,00 / 9600 

G091 not devided / m-sterile yes 49,00 / 480 624,00 / 9600 

G092 ½ devided / m-sterile yes 52,00 /490 847,00 / 9600 

G093 1/3 devided / m-sterile yes 56,00 /490 869,00 / 9600 

G094 ¼ devided / m-sterile yes 59,00 /490 898,00 / 9600 

G093 - TC not devided, gammasterile no 299,00 / 600 999,00 / 2400 

G094 -TC not devided, gammasterile yes 299,00 / 600 999,00/ 2400 



Advantages: widstanding manifold autoclaving ( +121°C ) deep temperature resistant up to -23°C, to use with 

most pens 

Cat.# Color Roll dimensiom (WxL) Euro 

LT-54W white 19,1mm x 54m 10,50 

LT-54GR green 19,1mm x 54m 10,50 

LT-54GE yellow 19,1mm x 54m 10,50 

LT-54BL blue 19,1mm x 54m 10,50 

LT-54RO red 19,1mm x 54m 10,50 

LT-54OR orange 19,1mm x 54m 10,50 

LT-54Mix all colors 6 Rolls 49,50 

LT-54RH Roll Holder 1 73,95 

Parafilm "M" 





Cat.# Description Dimension Euro 

HP-5075 Parafilm 4 inch x 125 ft 25,50 




Coated Microplates, 96-Well, 384-Well, 1536-Well for HTS and Cell Culture 

A new productline supports the HTS industry trend towards assay miniaturization and use of high density microplates. New 1536 

Well Plates cover the range of assay volume from 1 to 10µl. For laboratories, that hesitate converting to the new 1636 style 

because of fluid handling chellenges and the need for investment in new screening instrumentation, we offer a 384 well low 

volume (5 – 20µl) plate. These plates are compatible with current 384-well robotics and plate reading devices and offer 80% 

savings in chemicals and assay reagents. 

The new coated 96 und 384 Well glass bottom plates offer superial optical performance for cell based HTS using high-resolution 

imaging. 

All plate formats are available custom coated with a wide range of ligandes, inclusive streptavidin, avidin, protein A, protein G, 

protein L, poly-Lysine, gelatine and fibronektin and ligandes of your choice. Some types of HTS assays require a very high 

surface density and capacity of ligands. Other assays depend on afiltration step as an intergral part of assay design. To adress 

these applications, we introduce membrane filterplltes in the 96 and 384 -well format. Available membranes are nitrocellulose, 

glass fiber, PVDF, polycarboat, polyester and nylon. 

Specialized engineered blocking-reagents for maximizing signal-to-noise ratio, which are prime design goals for HTS. 

Heterogenic assays, blocking agents are used to post coat microplates and to minimize non specific binding in incubation 

buffers. The blocking agents effectivly reduce non-specific-binding to microplate, glass, metal or membrane surfaces. Blocking 

reagents provide a hydrophilic coating and as a result, non specific adsorption of labeled nucleotides or protein based probesis 

graetly reduced and signal-to noise ratio of the assay is enhanced. The used blockera are certified to be steril, DNase-, RNase 

und Protease frei. To offer the customer in the beginning the possibility of optimation of post-blocking, we offer a "Variety-Pack" 

including 1 plate each of BSA, BMT-2, BMT-4, unblocked at the price of a 5- Pack preblocked. 

(Cat. # VARxxxx, please replace xxxx cat.# of the plate of your choice 

All plates produced under industry leading preservation and vacuum packaging technology 

result in excellent repüroducability, stability and a shelf life of up to 2 years.The coated 

microplates are packed in custom multilayered foil barrier pouches and can be packed in 1- 

2-5 sleeves or stacks of 10-20-25/sleeve Highly efficient moisture adsorbend. 

If you do not find the plate/coating you are looking for, as a special service we coat 

your or our ligands on your plates! 

Streptavidin 

96-well plate (330ul Volume) 

Avidin, neutral, 

deglykosyliert 

Biotin Protein A GaR IgG RaG IgG GaM IgG 

EURO 

10x2 

plates 

transparent BS1 BA1 BB1 BPA1 BGR1 BRG1 BGM1 322 448 

white BS2 BA2 BB2 BPA2 BGR2 BRG2 BGM2 399 498 

black BS3 BA3 BB3 BPA3 BGR3 BRG3 BGM3 432 526 

white-transp. 

bottom 

black-transp. 

bottom 

transparentglassbottom 

white-glassbottom 

black-glassbottom 

BS4 BA4 BB4 BPA4 BGR4 BRG4 BGM4 490 592 





384-well plates standard 130ul Vol.) 




white-transp. 

bottom 



EURO Pre- 

blocked 

10x2 plates


black-transp. 

bottom 



1536-plates (Volume = 10ul) 







white - transp. 

Bottom 

black - 

transp.bottom 



Cell Culture-Plates ( Poly-D-Lysine/L-Lysine/Collagen ) & Surface Modified Plates 

Poly-D- 

Lysine 

Poly-L- 

Lys 

96-Platten (330ul Volume) 

Typ I 

Collagen 

Hydrophilic Amino Carboxy 

Aldehyd, 

coupling 

amino 

groups 

Maleimide( 

coupling SHgroups 

) 

transparent BZPD-1 BZPL-1 BZC-1 BH-1 BAM-1 BCa-1 BAl-1 BMa-1 415 

white BZPD-2 BZPL-2 BZC-2 BH-2 BaM-2 BCa-2 BAl-2 BMa-2 426 

black BZPD-3 BZPL-3 BZC-3 BH-3 BAM-3 BCa-3 BAl-3 BMa-3 426 

white-transp. 

bottom 

black-transp. 

bottom 




BZPD-4 BZPL-4 BZC-4 BH-4 BAM-4 BCa-4 BAl-4 BMa-4 465 


EURO/ 

15 x 2 

plate 





transparent BZPD- 9 BZPL- 9 BZC- 9 BH- 9 BAM- 9 BCa- 9 BAl- 9 BMa- 9 568 

white BZPD-10 BZPL- 

10 

black BZPD-11 BZPL- 

12 

white-transp. 

bottom 

black-transp. 

bottom 



BZPD-12 BZPL- 

13 

BZPD-13 BZPL- 

14 

BZPD-14 BZPL- 

15 

BZPD-15 BZPL- 

16 

384-well plates (Low–Volume = 25ul) 


BZC-10 BH-10 BAM-10 BCa-10 BAl-10 BMa-10 579 





BZC-15 BH-15 BAM-15 BCa-15 BAl-15 BMa-15 1130



16 


17 


tranparent BZPD-18 BZPL- 

18 


19 


20 

white-transp. 

bottom 

black-transp. 

bottom 

BZPD-21 BZPL- 

21 

BZPD-22 BZPL- 

22 









Top of Page


Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Quali - qPCR Kapillaren 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Die qPCR Kapillaen sind einfach zu handhaben, sie sind verpackt in 2 

StackRacks, ein Rack mit den Kapillaren, ein Rack mit den Stopfen. Jede 

Packung enthält einen Transferstift, der einen einfache Handhabung sowie 

den sicheren Verschluss der Kapillaren gewährleistet. Um die Kapillaren 

einzusetzen, ist ein wiederverwendbarer Rotor-Adapter notwendig, der in 

dem Starter-Kit enthalten ist. 

Die transparenten Plastik-Kapillaren weisen gegenüber den 

herkömmlichen Glas-Kapillaren erhebliche Vorteile auf: 

kostengünstg, niedrige Kosten pro Analyse 

unzerbrechlich, vermindert das Risiko von Kreuzkontaminationen 

kein Änderung der Methode nötig bei Einsatz von Plastik-Kapillaren anstelle von Glas- 

Kapillaren, kein Sensivitätsverlust 

höheres Reaktionsvolumen, die Kapillaren können falls erforderlich bis 50 µl 

Reaktionsgemisch aufnehmen, d. h. eine grössere Probenmenge kann die Empfindlichkeit 

erhöhen 

die Probe kann bei Bedarf mit einer 10 µl Pipettenspitze nach der Reaktion zurückgewonnen 

werden 

Die Kapillaren/Stopfen sind DNase-, RNase- and pyrogenfrei. 


G-LC-96 10 Racks á 96 Kapillaren und Stopfen, 1 Transferstift 359,00 

G-LC-Kit 

1 Starter-Kit, bestehend aus 7 Racks mit Kapillaren/Stophen, 1 

Transferstift und Rotor-Adapter 

497,00 

G-LC-A Rotor-Adapter für Light Cycler 280,00 

G-LC-T Transferstift 9,80 


Ein PCR-Kühlrack mit spezieller Gelfüllung 

Probenkühlung für circa 3 Stunden unter +4°C 

Temperaturindikator mit Farbumschlag bei 7°C 

ein ideales Hilfsmittel für die Präparation von 0,2 ml PCR-Tubes/-Streifen und PCR-Platten 

Kat. # Bezeichnung VE Euro 

KR-96 IsoFreeze PCR-Rack 2 Racks mit Deckel 49,80 

Quali - Tubes, Reaktionsgefässe für die PCR: 0,2ml und 0,5ml Einzeltubes 

file:///F|/Kisker/Kisker/deutsch/tubes.htm (1 von 19) [08.12.2005 22:30:48] 

Microparticles


Ultradünne Gefäße für die PCR gewähren einen schnellen 

Temperaturaustausch zwischen Heizsystem und Probe. Die dünnwandigen 

Tubes passen in alle gängigen Heizblöcke. Die Produkte sind in hochpolierten 

Formen hergestellt und absolut frei von Schmiermitteln, Farbstoffresten und 

Schwermetallen. Wie auch die anderen Produkte sind sie DNase-, RNaseund 

pyrogenfrei. Die lange Kappenform verschließt die Tubes sicher und 

verhindert Probenverlust durch Evaporation während der Heizphase. 

Die Tubes sind mit erhabenen oder flachen Verschlüssen, transparent oder 

farbig gemischt (blau - grün- orange - rot - violett - gelb) sowie in Einzelfarben 

erhältlich. 

1 VE=1000 Tubes 1-4 VE 5-9 VE 10+ VE 

Kat. # Volumen Cap Form/ Farbe Euro Euro Euro 

G001 0,2ml Erhaben / klar 39,40 36,85 34,30 

G001-A 0,2ml Erhaben/ farbig-mix 41,95 39,40 36,85 

1-4 VE 5-9 VE 10+ VE 

G001-B 0,2ml erhaben / blau 39,90 37,50 35,00 

G001-G 0,2ml erhaben / grün 39,90 37,50 35,00 

G001-O 0,2ml erhaben / orange 39,90 37,50 35,00 

G001-R 0,2ml erhaben / rot 39,90 37,50 35,00 

G001-V 0,2ml erhaben / violett 39,90 37,50 35,00 

G001-Y 0,2ml erhaben / gelb 39,90 37,50 35,00 

G001-F 0,2ml flach / klar 39,40 36,85 34,30 

G001-AF 0,2ml flach / farbig-mix 41,95 39,40 36,85 

G001-BF 0,2ml flach / blau 39,90 37,50 35,00 

G001-GF 0,2ml flach / grün 39,90 37,50 35,00 

G001-OF 0,2ml flach / orange 39,90 37,50 35,00 

G001-RF 0,2ml flach / rot 39,90 37,50 35,00 

G001-VF 0,2ml flach / violett 39,90 37,50 35,00 

G001-YF 0,2ml flach / gelb 39,90 37,50 35,00 

10 VE 

1-4 VE 5-9 VE 10+ VE 

G050 0,5ml flach / klar 28,90 25,90 23,90 

G050-A 0,5ml flach / farbig-mix 31,90 29,80 28,40 

Quali - Tubes, Reaktionsgefässe für die PCR: 0,2ml ohne Deckel 

Ultradünne Gefäße für die PCR 

Hergestellt in hochpolierten Formen hergestellt und absolut frei von Schmiermitteln, 

Farbstoffresten und Schwermetallen 

zerifiziert DNase-, RNase-und pyrogenfrei. 

Kat. # Volumen Farbe VE Euro 


G001-NC-B 0,2ml blau 10 x 1000 395,00 

G001-NC-G 0,2ml grün 10 x 1000 395,00 


file:///F|/Kisker/Kisker/deutsch/tubes.htm (2 von 19) [08.12.2005 22:30:48]


G001-NC-R 0,2ml rot 10 x 1000 395,00 

G001-NC-V 0,2ml violett 10 x 1000 395,00 

G001-NC-Y 0,2ml gelb 10 x 1000 395,00 

Quali - PCR Tubes, 8er - Streifen PCR Tubes 

PCR Tubes in 8er - Streifen haben gleiche Spezifikationen wie unsere 0,2ml Einzeltubes und sind 

DNase-, RNase und pyrogenfrei. Die Tubes werden in Streifen zu 8 Tubes angeboten. 

1 VE =125 Streifen 1-4 VE 5-9 VE 10+ VE 

Kat. # Volumen Farbe Euro Euro Euro 

G002 0,2ml transparent 71,10 68,25 63,65 

G002-A 0,2ml farbig-sortiert 71,10 68,25 63,65 

G002-B 0,2ml blau -- -- 636,50 

G002-G 0,2ml grün -- -- 636,50 

G002-R 0,2ml rot -- -- 636,50 

G002-O 0,2ml orange -- -- 636,50 

G002-V 0,2ml violett -- -- 636,50 

G002-Y 0,2ml gelb -- -- 636,50 

Quali – PCR Tube Caps 

1 VE = 125 Streifen 1-4 VE 5-9 VE 10 + VE 

Kat. # Form Farbe Euro Euro Euro 

G004 erhaben transparent 16,35 14,85 13,80 

G004-F flach f. RT-PCR transparent 25,90 24,90 23,90 

G004-A erhaben farbig-sortiert 16,35 14,85 13,80 

G004-B erhaben blau -- -- 138,00 

G004-G erhaben grün -- -- 138,00 

G004-R erhaben rot -- -- 138,00 

G004-O erhaben orange -- -- 138,00 

G004-V erhaben violett -- -- 138,00 

G004-Y erhaben gelb -- -- 138,00 

Quali - PCR Tubes mit individuell anhängendem Deckel 

Diese transparentenTubes werden in Streifen zu 8 Tubes ( 0,2ml ) 

angeboten und haben den Vorteil, daß einzelne oder mehrere Tubes 

geschlossen werden können, während andere noch zur Probenvorbereitung 

geöffnet bleiben können. 

Diese Tubes sind ebenfalls DNase-, RNase- und pyrogenfrei. 

10 VE 

1-4 VE 5 + VE 

Kat. # Pack.einheit Farbe Euro Euro 

G003 1 x 120 Streifen klar, erhabener Deckel 92,90 89,00 

G003-A 1 x 120 Streifen farbig gemischt, erhabener Deckel 96,90 92,00 



G003 -F 1 x 120 Streifen klar, flacher Deckel 61,90 58,80 

0,2ml Low Profile dünnwandige Tube Streifen EU (Extreme Uniformität) für Éxtraordinary PCR & 

Real Time PCR´ 

Nur eine uniforme Wandstärke garantiert akkuraten Temperaturtransfer und damit eine gleichmäßige 

und präzise Cycling- Reaktion. Die Tubes können mit niedrigsten Ansatzvolumen von 5µl benutzt 

werden, da die maximale Abweichung der Wände nur 0,05mm beträgt. Die reduzierte Höhe des 

Tubes verbessert das Evaporationsverhalten und die Lichtverhältnisse für Real Time PCR. 

Material 

Hochqualitatives Polypropylen garantiert Transparenz und Gasdichtichkeit, die Produkte sind DNase-, RNase-, pyrogenfrei und 

frei von humaner DNA 

Cap Strip 

Die flache und dünnwandige Cap-Form garantiert schnelle Aufheizung des eingeschlossenen Luftvolumens und limitiert die 

Kondensation auf ein Minimum. Eine extra weite optische Zone garantiert einen maximalen Lichttransfer.Bei Verwendung in PE 

Cyclern & Biorad iCycler emphehlen wir den Einsatz des ´Low Profile Strip Adapters´. 

Überzeugen Sie sich von der Qualität, nutzen Sie die Einführungspreise! 

Kat. # Beschreibung Pack.einheit Euro 

GK79601 EU 8-tube strip, transparent 1 x 120 Streifen 49,95 

GK79609 EU 8-tube strip, weiss, für RT-PCR 1 x 120 Streifen 49,95 

GK79610 EU 8-tube strip, schwarz, für RT-PCR 5 x 120 Streifen 249,00 

GK79701 EU 8-cap strip, transparent 1 x 120 Streifen 19,00 

GK77777 Low Profile Tube adapter 1 Adapter 55,00 

0,2ml dünnwandige PCR Tubes EU (Extreme Uniformität) 

Nur eine uniforme Wandstärke garantiert akkuraten Temperaturtransfer und damit einen gleichmäßige und 

präzise Cycling - Reaktion. Die Tubes können mit niedrigsten Ansatzvolumen von 5µl benutzt werden, da die 

maximale Abweichung der Wände nur 0,05mm beträgt. 

Material 

Hochqualitatives Polypropylen garantiert Transparenz und Gasdichtigkeit, die Tubes sind DNase-, RNase-, pyrogenfrei und frei 

von humaner DNA. Die Tubes weisen eine erhöhte Flexibilität auf, die ein Platzen oder andere Beschädigungen unter erhöhten 

Belastungen vermeiden. 

Cap 

Die flache und dünnwandige Cap-Form garantiert schnelle Aufheizung des eingeschlossenen Luftvolumens und limitiert die 

Kondensation auf ein Minimum. Die Kombination aus erhabener Randform mit flacher Oberfläche garantiert zum einen absolut 

dichten, kondensationsfreien Verschluss, zum anderen ermöglicht die mattierte, flache Oberfläche das Beschriften. Das Cap hat 

einem Ánti-Kontaminations-Schutz´, der Kreuzkontaminationen durch manuelles Hantieren mit den Tubes verhindert. 



96–Well–PCR–Platten, flache Oberfläche, flexibel "high und low-profile" 

Diese Platten kann praktisch mit allen 0,2ml Blöcken verwendet werden. Die 

flache Oberfläche erleichtert den Verschluss mit Folien Ihrer wahl. 

Low-Profile-Platten werden insbesondere bei kleinen Probenvolumen 

empfohlen, da der Totraum zwischen Probe und Heizdeckel reduziert wird. 

Kat.# Beschreibung Euro/50 Platten Euro/100 Platten 





Quali - PCR - Platten ohne Rahmen 

Unsere PCR-Platten im Mikrotiterplattenformat sind Trägerplatten bestückt mit 0,2ml extra 

dünnwandigen PCR-Tubes, die einen schnellen Temperaturaustausch zwischen 

Heizsystem und Probe gewährleisten. Die PCR-Platten sind garantiert DNase- und RNase 

frei und eine Alternative für Großverbraucher anstelle von Einzel-PCR-Tubes oder Tubes 

in Streifen. Die erhabenen Tubes können sowohl mit Dichtungsfilmen wie auch erhabenen 

(G004) oder flachen (G004-F) Caps in 8-Streifen verschlossen werden. Die PCR-Platten 

passen zu allen gängigen Thermo-Cyclern und sind im 96-Well Format auch steril 

erhältlich. 

10 Platten 50 Platten 100 Platten 

Kat.# Anzahl Plätze Farbe Euro Euro Euro 

G030 24 Well transparent 18,40 71,10 137,55 




G033 96 Well steril transparent 45,50 198,80 350,20 

G032-A 96 Well farbig mix -- 159,00 310,00 

G032-B 96 Well blau -- 149,00 295,00 

G032-G 96 Well grün -- 149,00 295,00 

G032-R 96-Well rot -- 149,00 295,00 

G032-O 96 Well orange -- 149,00 295,00 

G032-V 96 Well violett -- 149,00 295,00 

G032-Y 96 Well gelb -- 149,00 295,00 

Quali - PCR Platten mit Rahmen und Halbrahmen, 96 Well 

Zusätzlich zu den oben beschriebenen PCR Platten bieten wir weitere 

Alternativen für den Einsatz in speziellen Cyclern. Diese Platten haben 

die gleichen chemisch-biologischen Eigenschaften wie die oben 

beschriebenen. Die Platten mit Vollrahmen sind kompatibel mit 

Robotersystemen und die Schlitze im Rahmen gewährleisten eine 

exakte Handhabung durch den Roboter. Der vorhandene Platz auf dem 

Rahmen kann für Barcodes verwendet werden 

- G060H passt ideal zu den Perkin Elmer Cyclern 9600 and 9700. 

- G060/H/1E optimiert für ABI 3100, flache Oberfläche, kein störender 

Rand beim Aufbringen von Verschlussfolien 

-G060/H/1E-OA mit erhöhtem, umlaufenden Rand für ABI 3100, 3700, 

3730, 7000, 7700, 7900, GeneAmp 5700, 9600, 9700. 

- G060/H-W und G060H-1E-W weiße Platten, besonders geeignet für 

"Lighttyper" Hoffmann-LaRoche 

- Plattenkompatibilität, Septamatten und flache Verschußstreifen und 

Folien für RT-PCR siehe unten 

- Alle Platten (außer G060/H1E-OA) auch farbig erhältlich, bitte 

Farbcode an Bestellnummer zufügen: B = blau, G = grün, R = rot, O = 

orange, V = violett, W=weiß, Y = gelb 

- Septamatten und RT-PCR Zubehör siehe unten. 

10 Platten 50 Platten 100 Platten. 

Kat.# Format Farbe Euro Euro Euro 

G060 96 Well mit Rahmen 

transparent 

Transparent 


28,80 139,00 269,00


G060/H 96 Well Halbrahmen transparent 28,80 139,00 269,00 

G060/H/1E 96 Well Halbrahmen/1 Aussparung transparent 28,80 139,00 269,00 

G060/H/OA 

96 Well Halbrahmen/umlaufender 

Rand 

transparent 28,80 139,00 269,00 

G060/H/SG 96 Well Halbrahmen/segmentiert transparent 28,80 139,00 269,00 

XXX-B-G-R-O-V- 

W-Y 

96 Well farbig 149,00 295,00 

Quali - PCR Platten, 96 Well für ParAllele/Affymetrix System 

Diese Platten sind mit speziellen Barecodes versehen zum Einsatz im MegAllele Genotyping 

System/Affymetrix GeneChip Scanner 3000. 

Kat.# Beschreibung Farbe Euro 

50 Platten 

321-63-ANN Anneal PCR Platte transparent 229,00 

321-63-ASY Assay PCR Platte transparent 229,00 

321-63-HYB Hybridization PCR Platte transparent 229,00 

321-63-LBL Label PCR Platte transparent 229,00 

Septa/Tubes/Kapillaren für ABI Systeme und Verschlussfolien für PCR & RT-PCR 

Septamatten (Kat.Nr. G060/S-3100): aus hochreinem Silikon, sehr flexibel; 

zertifiziert DNase-, RNase-und pyrogenfrei, autoklavier- und 

wiederverwendbar für ABI 3100. 

Septa(Kat.Nr. G310-S) für 0,5ml Tubes und 0,5ml Tubes (G310-T) für ABI 

PRISM 310 

Ultra-Clear-Folie (Kat.Nr.G060/UC-RT): Die Klarheit gewährleistet die 

optische Analyse während der RT-PCR. Der einmalige drucksensitive 

Klebstoff hinterläßt keine Klebstoffreste an der PCR-Platte, die mit den 

Proben interferieren könnten. 

RT-PCR-Deckelstreifen (Kat.Nr.G004-F): verwendbar mit unseren PCR- 

Platten und 8er-Tube-Streifen. Die plane hochklare Deckeloberfläche ist 

speziell für RT-PCR geeignet. 

Polyester-Adhäsivfolie (Kat.Nr. G040): eine Adhäsivfolie für den Einsatz bei 

kurzzeitigen hohen Temperaturen, wie PCR, oder zur Abdeckung von ELISA- 

Platten 

Thermal-Seal-Folie (Kat.Nr. G042): eine hochwertige Qualität für den 

Thermoverschluß von PCR-Platten 

Alufolie (Kat.Nr. G071): diese kaschierte Alufolie ist der ideale Verschluß für 

weite Temperaturbereiche, resitent gegen den Kontakt mit agressiveren 

Reagenzien, geeignet für den Schutz lichtempfindlicher Proben 

G071-P neu im Programm: die DURCHSTECHBARE Alufolie 

Alle Verschlußfolien und Deckelstreifen sind DNase- RNase- und pyrogenfrei, 

Maße 78 x 120mm + 10mm Griffleiste. 

Kat. # Beschreibung Anwendungsbereich VE Euro 

G060/S-3100 Septamatte ABI 3100 10 Matten 75,75 

G310-S Septa f. 0,5ml Tubes ABI 310 500 139,00 

G310-T 0,5ml Tube ABI 310 500 42,90 



G310-K47 Kapillare 47cm ABI 310 5 253,00 


G060/UC-RT Ultra Clear RT-PCR-Folie RT-PCR 100 Filme 169,80 

G004 Caps, transparent PCR 125 Streifen zu 8 16,35 

G004-F Caps, flach f. RT-PCR RT-PCR 125 Streifen zu 8 25,90 

G040 Adhesive Folie, PP -40°C bis +100°C 100 38,00 

G041 Adhesive Film steril -40°C bis +100°C 100 55,75 

G042 Thermal Seal.Film -40°C bis +100°C 100 48,55 

G071 

G071-P 

Adhesive Aluminiumfolie, 

Papier kaschiert 


durchstechbar 

-40 bis 135°C 100 24,50 

-40 bis 135°C 100 28,50 

G079 Andruckrolle 100 1 29,90 

MiniSealer 

Die thermische Verschlussmethode ist die effektiefste Methode, um PCR-Platten (96- und 384 Well) und 

Deep-Well-Platten absolut dicht zu verschließen. Kristallographie- und RT-PCR-Platten können mit Adhesiv- 

Folien ohne Hitzeanwendung verschlossen werden. Fingerabdrücke, die die erforderliche optische Klarheit 

beeinflussen können, werden vermieden 

Der MiniSealer ist ein halbautomatisches System, bei dem die Einstellung der Andrucktemeratur und-dauer 

manuell über Tastatur, die Ausführung und Kontrolle mittels Microprozessor erfolgt. Die Bedienung ist 

einfach und der Plattenverschluss vollzieht sich in Sekunden. Der Heizblock wird automatisch auf 

Platte/Folie abgesenkt und und gibt anschließend die verschlossene Platte frei. 

Das Gerät beinhaltet je einen Supportblock für SBS-Format-Platten und Halb/Vollrahmenplatten. 

Spezifikationen: Abmessungen: 25x43x45 cm, Gewicht 29,5 kg 



Quali – 384er PCR-Platten, optimiert für ABI- und MJ-Research-Systeme 

alphanumerische Identifikationssystem 

hochreines Polypropylen 

garantiert DNase-, Rnase- und pyrogenfrei 

Form-optimiert für ABI 3100, 3730, 7000 sowie MJ Research Systeme PTC200 und PTC225. 

10 Platen 50 Platten 100 Platten 

Kat. # Farbe Euro Euro Euro 


G034-ABI-A farbig gemischt -- 209,00 399,00 

G034-ABI-B blau -- 209,00 399,00 

G034-ABI-S schwarz -- 209,00 399,00 

G034-ABI-G grün -- 209,00 399,00 

G034-ABI-O orange -- 209,00 399,00 

G034-ABI-R rot -- 209,00 399,00 

G034-ABI-V violett -- 209,00 399,00 

G034-ABI-W weiß -- 209,00 399,00 



G034-ABI-Y gelb -- 209,00 399,00 

384 PCR Platten 

Für Anwender mit sehr hohen Probenaufkommen ist diese Platte geeignet. Die Wells haben ein 

maximales Volumen von 40µl mit einem Arbeitsvolumen von 25µl. Die Platte ist mit gängigen Thermo- 

Cyclern wie Perkin Elmer 9700, Techne, Hybaid einsetzbar und weist ein alphanumerisches 

Identifizierungsystem auf. Sie kann mit gängigen Dichtungsfilmen verschlossen werden. Hochreines 

Polypropylen und Transparenz sprechen für die Qualität. Zudem sind sie für den Einsatz in 

Robotersystemen mit Streifen-Codierung geeignet. Auch hier ist DNase- und RNase Freiheit 

garantiert. 



G034 transparent 39,90 189,00 329,00 

G035 Weiss -- 219,00 419,00 

G036 Schwarz -- 219,00 419,00 

Silikonmatten für PCR Platten 

Die Silikonmatten sind aus hochreinem Silikon und deswegen sehr flexibel. Sie zeichnen 

sich aus durch eine alphanumerische Kodierung, sind durchstechbar und selbstdichtend. 

Sie sind zertifiziert DNase-, RNase und pyrogenfrei, autoklavierbar und wiederverwendbar. 

G068 Andruckmatte: garantiert höhere Dichtigkeit, vermeidet Evaporation während der 

PCR, verwendbar auch in Verbindung mit Folien 

G078 Expansion-Matte: für Perkin Elmer, dichtet Tubes im "MicroAmp" Tray. 

Kat. # Anwendung,Matte für: VE Euro 

G072 PCR-Platte, 96 Well 10 46,00 


G074 PCR-Platte, 384 Deep Well 10 49,80 

G078 96 Well Expans.Matte für PE 10 42,00 

G068 Andruckmatte für PCR-Platte 10 42,00 

PCR Platten Kompatiblität 

Thermo Cycler 

G032 96 

Well 

G060 96 Well 

mit Rahmen 


Halbrahmen 

ABI 3100 / 3130 ok 

ABI 3700 / 3730 ok 

G060/H/1E & 

G060/H/OA 96 



segmentiert, 

Halbrahmen 




ABI Geneamp 

2720/5700 

ABI Geneamp 9600 / 

9700 

ok ok ok 






G034-ABI 

384 Well




Bio-Rad GeneCycler ok ok 



Eppendorf 

Mastercycler 







MJ Research 

PTC200 









Stratagene 

Robocycler 

ok ok ok 



Beckmann CEQ alle 

Modelle 

Quali - Deep Well Platten 

Die autoklavierbaren Deep Well Platten sind aus hochreinem Polypropylen. Das 96iger Format ist 

mit Mehrkanalpipetten und Robotersystemen kompatibel. Die Platten haben zylindrische Wände 

mit Rundboden, sodaß die Proben vollständig zurückpipettiert werden können, welches bei Platten 

mit quadratischem Boden nicht möglich ist. 

Die "Square-Well-Platten (G064) eignen sich dagegen besser zur Kultivierung von Bakterien. 

Die DNase-, RNase-, Pyrogen und Metall freien, stapelbaren Deep Well Platten sind ideal für 

DNA/RNA Assays sowie andere Enzymtests, chemische Resistenz und Gefrierfähigkeit bis –80°C 

sind weitere Vorteile. Als Verschlüsse bieten wir wiederverwendbare Silikonmatten sowie 

selbstklebende PP- und Alufolien an. 

Kat.# Beschreibung Material/Farbe/VE Euro 

G069 Deep Well Platte, 0,5ml PP/ klar / 50 Platten 137,50 



G064 

Deep Well Platte, 2,0ml quadratische 

VerDeepung 


PP/ klar / 25 Platten 96,90 

ok ok


Silikonmatten und Verschlußfolien für Deep-Well- und Zellkulturplatten 

Silikonmatten: hochreines Silikon, sehr flexibel, alphanummerische Kodierung, 

durchstechbar, selbstdichtend, autoklavier- und wiederverwendbar. 

Gasdurchlässige Folie: eine poröse Adhesivfolie für Zell- und Bakterienkulturen. Die Folie ist 

effizent dicht, schützt vor Kontaminationen und ist gasdurchlässig. Kat.# G067 nicht steril 

und G067-S steril , Maße 80x12mm LxB 

PP-Folie Kat.Nr. G070: selbstklebende Folie aus PP, temperaturbeständig von –40 bis 

+80°C, Maße 78 x 120mm + 10mm Griffleiste 

Alufolie Kat.Nr. G071: selbstklebende, kaschierte Alufolie, temperaturbeständig von –40 bis 

+135°C, Maße 78 x 120mm + 10mm Griffleiste 

Alle Silikonmatten und Verschlussfolien sind DNase- RNase- und pyrogenfrei 

Kat.# Beschreibung VE Euro 

G070 PP-Folie 100 24,10 

G071 Alu-Folie 100 24,60 

G067 gasdurchlässige Zellkulturfolie 100 69,00 

G067-S gasdurchlässige Folie steril 2 x 25 49,00 

G075 für runde Deep Wells 1 oder 2ml G062/G063 10 39,00 

G076 für quadratische Deep Wells 1 oder 2ml G064 10 39,00 

G077 für runde Deep Wells 500µl 10 39,00 

384-Well ´Diamond´ Mikroplatten und DMSO resistente Imperma Matte 

Eine neue square Well Platte für "HTS und Drug Discovery Labs" , verfügbar in 120µl und 240µl 

exzellente chemische Resistenz von -80°C bis +120°C verwendbar 

SBS Foot Print für Roboter Anwendungen 

240 µl Version für maximale Probenlagerung 

ultraflache Oberfläche zur Verwendung adhesiver oder heissklebender Folien 

alphanumerische Kennzeichnung 

bis 4.000g zentrifugierbar 

Imperma-Matte: autoklavierbar, wiederverwendbar, Chemikalienresistent 

Platten und Matten sind zertifiziert DNase-, RNase frei. 

Kat.# Beschreibung Max. Volumen mit Silikonmatte VE Euro 

G384-12 384 Mikroplatte 120µl 90µl 50 179 


G384-SQ 384 Imperma-Matte (Silikon) für square Wells 10 49,8 

Quali -Glasbodenplatte mit 96 - 384 und 1536 Well 

Eine hochqualitative Glasbodenplatte entsprechend SBS-Standards (127,8 x 85,6 x 14,6mm). 

Reduzierung der Autofluoreszenz im Assay unter 5% des Levels von Standard- 

Plastikmikrotiterplatten. 

Weitere Vorteile: 

wesentliche genauere Messungen aufgrund bisher umübertroffener Plangenauigkeit< 75µ bei 

96 und 384 Well Platten, < 125µ bei den 1536 Well Platten 

"low-base design" garantiert Lesbarkeit aller Wells, speziell den äußeren Wells 

"square Well design" erhöht die optisch verfügbare Fläche und das Well-Volumen - ideal für 

HTP Anwendungen 

Hauptanwendungen: 

Fluorescence Correlation spectroscopy (FCS) 

Confocal Imaging 

Fluorescence Polarisation 

Cell-based Assays 

Microarrays 

Laser-induced Fluorescence 



Kat.# Beschichtung/Sterilität Wells/Volumen Euro/5 Platten Euro/20 Platten Euro/60 Plates 

GB-96 ohne / nein 96/500µl 61,00 231,80 660,00 

GB-96 -S ohne / ja 96/500µl 108,00 410,40 1.083,00 

GB-96PLL Poly-L-Lysine/ja 96/500µl p.o.r. p.o.r. p.o.r. 

GB-96Co Collagen/ja 96/500µl p.o.r. p.o.r. p.o.r. 

GB-384 ohne / nein 384/120µl 108,00 410,40 1.111,50 

GB-384 -S ohne / ja 384/120µl 149,00 566,20 1.539,00 



GB-1536 ohne / nein 1536/8µl 244,40 928,00 2.508,00 

GB-1536 -S ohne / ja 1536/8µl 286,00 1.086,00 2.935,50 



Mehrkanalpipetten Reservoir 

eine praktische Hilfe beim Arbeiten mit Mehrkanalpipetten 

Füllvolumen 55ml, V-förmiger Boden zur nahezu kompletten Entleerung aus klarem PVC 

Kat.# Beschreibung Pack.einheit Euro 


Zubehör for ABI PRISM 377 

Untenstehend haben wir eine Liste von Zubehörteilen wie Glasplatten, Spacer und Kämme für 

den automatischen Sequenzierer ABI PRISM 377 zusammengestellt 

Produkte signiert mit * sind für den 96Well Upgrade 

High-Volume-Kämme haben größere Abstände zwischen den Zähnen und die Zähne laufen 

spitzer als beim Haifischzahn-Kamm zu. 

Extra lange Kämme haben 2mm längere Zähne als Standardkämme 

Sharkgum Kämme sind Haifischzahnkämme, die jedoch nicht spitz zulaufen, sonder mit einem 

breiteren Ende gestaltet sind. Dadurch entsteht ein größerer Abstand zwischen den Reihen 

ABI PISM ist eingetragenes Warenzeichen von Perkin Elmer Corporation 


377-12GP Borosilikat Glasplatte front 12x18cm 1 211,00 

377-12GSP Borosilikat "Step" Glasplatte front* 12x18cm 1 417,00 

377-12GPR Borosilikat Glasplatte rear 12x18cm 1 211,00 

377-24GP Borosilikat Glasplatte front 24cm 1 288,00 

377-24GSP Borosilikat "Step" Glasplatte front* 24cm 1 372,00 

377-24GPR Borosilikat Glasplatte rear 24cm 1 288,00 









377-12SM Spacer, mylar 12cm x 0,2mm 2 49,90 




377-24ST 24 Well Haifischzahn-Kamm, mylar 0,2mm 1 54,00 




377-48STU-02 48 Well Haifischzahn-Kamm, mylar 0,2mm, * 1 79,00 


















377-24WF 24 Well-Rechteck- Kamm, mylar 0,2mm 1 59,00 





Casting Kamms 

377-55SE 5,5mm Deep Straight Edge Kamm,mylar 0,2mm 1 65,00 




377-73SE-02 7,3mm Deep Straight Edge Kamm,mylar 0,2mm 1 65,00 


Special Kamms 

377-48HVST 

48 Well High Volume Haifischzahn-Kamm, mylar 

0,2mm 


1 65,00


377-64HVST 

377-72HVST 

377-96HVST-02 

377-96HVST-03 

377-96HVST-04 


0,2mm 


0,2mm 


0,2mm 


0,3mm 


0,4mm 

1 71,00 

1 71,00 

1 65,00 

1 65,00 

1 65,00 

377-48ELST 48 Well Extra Long Haifischzahn-Kamm, mylar 0,2mm 1 65,00 



377-32SG 32 Well Sharkgum Kamm, 0,2mm 1 65,00 




377-64SGU-02 64 Well Sharkgum Kamm, 0,2mm, * 1 79,00 







Quali - Mikrotest-Platten, 96 Well für Proteinkristallisation 

Diese 96-Well- SBS-Standardformat-Platte wird für die Anwendung "Sitting Drop" HTP Proteinkristallisation 

angeboten. 

Die Platte hat 96 Pufferreservoire mit je einem Proteikristallisationsnäpfchen. Die Platten sind aus 

hochwertigem, optisch klarem Polystyrol. Das Pufferreservoir hat eine neuartige D-Form, welche geometrisch 

an der rechten Seite angeordnet ist, während das dazugehörige Proteinkristallisationsnäpfchen auf der linken 

Seite angeordnet ist. Die Platte kann manuell oder über Roboter befüllt werden. 

Als Verschlussfolie eignet sich besonders die Ultra-klare Folie Kat.# G060/UC-RT 

Charakteristika: SBS-Standard Platte mit 96 Wells, maximales Puffer Volumen 250 µl, 

Proteinkristallisationsnäpfchen 4,3 µl 

kompatibel mit manuellen Pipetten und automatisierten Systemen 

resistent gegen organische Lösungsmittel 

reduzierte Polarisation und Statik 

Barcode Option 

Das runde Proteinkristallisationsnäpfchen erlaubt einfachen Zugriff für weitere Manipulationen 

Kat.# Beschreibung Eur/VE Eur/VE 

G096-PC Proteinkristallisationsplatte, 96 Well 84,00/10 395,00/50 

G060/UC-RT Ultra-Clear-Folie 169,80/100 

Proteinkristallisation - Software 



Zusätzlich bieten wir eine "Crystal Recognition Software" zur automatischen Kristall-Detektion für den HTP 

Propteinkristallisationsprozess an. Die Software wurde von Wissenschaflern des Lawrence Livermore 

National Laboratory (LLNL) entwickelt. Die Software kann in jedes beliebige Imaging-System integriert 

werden. 

Die CRS-Software bietet folgende Vorteile: verbessert Prezision und Geschwindigkeit der Detektion 

weist Unterschiede zwischen Prezipitation und Kristall aus 

einfach zu handhaben 

findet auch kleine und meist unsichtbare Kristalle, die visuell nicht detektierbar sind 

kostengünstig, da kein neues Imaging-System benötigt wird 

Eine Demoversion stellen wir auf Anfrage zur Verfügung. 


G096PC-CRS Crystal Recognition Software auf Anfrage 

Quali - Mikrotest-Platten, 96 Well Polypropylene 

Diese 96-Well-Platten sind aus hochwertigem Polypropylen "medical grade" hergestellt. Mit der ultra-flachen 

Oberfläche sowie Kompatibilität für HTS sind sie hervoragend geeignet für Roboter liquid handling 

equipment (SBS-standard). 

Hauptanwendungsbereiche: Probenlagerung und -transport – Screening – HTP und Mikrotiter Assays. 

Vorteile: 

erhältlich mit Rundboden (500µl), bestens geeignet für sanfte Zellmanipulation, und V-Boden (450µl) für 

effiziente Probensammlung und -manipulation 

spezielles Well design minimiert Risiko der Kreuz-Kontamination und gewährleistet effektive Haftung von 

Klebefolien 

auffällige alphanumerische Kodierung für effiziente Well-Identifizierung 

sehr stabile Platte beständig gegenüber einer Vielzahl von Chemikalien, Lösungsmittleln und Alkoholen 

einsetzbar im Temperaturbereich von -80 bis 121°C 

zertifiziert DNase-, RNase und endotoxin frei. 

Kat.# Beschreibung Farbe VE Euro 

G096-U Mikrotest-Platte, U-Form, 96 Well transparent 50 49,00 

G096-UBB Mikrotest-Platte, U-Form, 96 Well blau 50 69,00 

G096-UBG Mikrotest-Platte, U-Form, 96 Well grün 50 69,00 

G096-UBR Mikrotest-Platte, U-Form, 96 Well rod 50 69,00 

G096-UBY Mikrotest-Platte, U-Form, 96 Well gelb 50 69,00 

G096-UBW Mikrotest-Platte, U-Form, 96 Well weiss 50 69,00 

G096-UBS Mikrotest-Platte, U-Form, 96 Well schwarz 50 69,00 

G096-V Mikrotest-Platte, V-Form, 96 Well transparent 50 49,00 

G096-VBB Mikrotest-Platte, V-Form, 96 Well blau 50 79,00 

G096-VBG Mikrotest-Platte, V-Form, 96 Well grün 50 79,00 

G096-VBR Mikrotest-Platte, V-Form, 96 Well rod 50 79,00 

G096-VBY Mikrotest-Platte, V-Form, 96 Well gelb 50 79,00 

G096-VBW Mikrotest-Platte, V-Form, 96 Well weiss 50 79,00 

G096-VBS Mikrotest-Platte, V-Form, 96 Well schwarz 50 79,00 

Quali - Mikrotest Platten Polystyrol 



Hergestellt aus erstklassigem, kristallklaren Polystyrol, beste Reproduzierbarkeit durch minimale 

Leerwertabsorption, geringe Eigenfluoreszenz, mattierte Oberflächen verhindern Ablesefehler, 

alphanumerische Kennzeichnung der Vertiefungen, erhöhte Kavitätenränder zur Vermeidung von 

Kreuzkontaminationen. Durch abgerundete Ecken ist der Deckel nur in einer Richtung aufsetzbar. 

Die Platten sind stapelbar und haben ein Beschriftungsfeld auf der Seitenfläche. 

Kat.# Beschreibung, Volumen in ml/Well Euro/100 St. Euro/1000 St. 

G080-UB MTP-Platte, U-Form, 0,35 38,90 359,00 

G080-V MTP-Platte, V-Form, 0,34 38,90 359,00 

G080-F MTP-Platte,Flachboden, 0,41 38,90 359,00 

G080-D MTP-Deckel 28,50 249,00 

G080-MP6 Makroplatte, 6 well, 15 49,90 460,00 

Quali - Mikro-Platten für Zellkulturen, 96 Well, steril mit aufgesetztem Deckel 

Nur optisch hochreine Kunststoffe finden in der Produktion für unsere Zell- und Gewebekulturplatten 

Verwendung und erlangen so für die mikroskopische Untersuchung eine unübertroffene optische 

Klarheit. Die Platten zeichnen sich aus durch: spezielle atoxische Oberflächenbehandlung optimale 

Zelladhäsion und hervorragendes Wachstum 

Kondensationsringe verhindern Medienverlust und somit Veränderung der Osmolarität 

keine toxischen Rückstände durch Strahlensterilisation 

sicherer Sterilistätsverschluss durch volltransparente Peel-Verpackung, 1 St. mit Deckel 

Preisnachlässe für Abrufaufträge/Jahresbedarfsbestellungen 

Kat. # Beschreibung/Volumen in ml/Well Fläche VE Euro 

G080TC-UB TC-Platte, U-Form, 0,35 0,35cm2 100 St. 149,90 

G080TC-V TC-Platte, V-Form, 0,34 0,28cm2 100 St. 149,90 

G080TC-F TC-Platte,Flachboden, 0,41 0,35cm2 100 St. 149,90 

G080TC-24F TC-Platte, 24 well, flach, 2,9 1,75cm2 100 St. 149,90 

G080TC-6F TC-Platte, 6 well, flach, 15 9,6cm2 100 St. 149,90 

Quali - Petrischalen für die Mikrobiologie und Zellkultur 

Unsere Petrischalen gewährleisten optische Transparenz, hohe Thermostabilität, plane Stapelflächen, beste 

Formstabilität sowie Herstellung unter keimarmen Produktionsbedingungen (maschinensteril) gemäß dem 

allg. Hygienestandard. 

Die Petrischalen sind maschinensteril, bzw strahlensteril für die Zellkultur mit oder ohne Belüftungsnocken in 

normaler und schwerer Ausführung lieferbar. 

Die Maße sind einheitlich 94 x 16mm ( Durchmesser x Höhe ) 

Kat. # Form / Sterilität Nocken Euro / VE Euro / VE 

G090 ungeteilt / m-steril nein 49,00 / 480 624,00 / 9600 

G091 ungeteilt / m-steril ja 49,00 / 480 624,00 / 9600 

G092 ½ geteilt / m-steril ja 52,00 /490 847,00 / 9600 

G093 1/3 geteilt / m-steril ja 56,00 /490 869,00 / 9600 

G094 ¼ geteilt / m-steril ja 59,00 /490 898,00 / 9600 

G093-TC ungeteilt, gammasteril nein 299,00 / 600 999,00 / 2400 

G094 -TC ungeteilt, gammasteril ja 299,00 / 600 999,00/ 2400 

"Label - Tape" Markierband 



Ein vielseitiges selbstklebendes Beschriftungsband zur Probenidentifizierung bzw. Kennzeichnung von 

Arbeits- und Hilfsmitteln im Labor. Vorteile: widersteht mehrfachem Autoklavieren ( +121°C ) kältebeständig 

bis –23°C beschriftbar mit allen gängigen Stiften rückstandsfrei abziehbar 

Kat.# Farbe Rollengrösse (BxL) Euro 

LT-54W weiss 19,1mm x 54m 10,50 

LT-54GR grün 19,1mm x 54m 10,50 

LT-54GE gelb 19,1mm x 54m 10,50 

LT-54BL blau 19,1mm x 54m 10,50 

LT-54RO rot 19,1mm x 54m 10,50 


LT-54Mix alle Farben 6 Rollen 49,50 

LT-54RH Rollenhalter 1 73,95 

Parafilm "M" 




Parafilm wird in der praktischen Dispenserbox geliefert. 

Kat.# Bezeichnung Abmessung Euro 

HP-5075 Parafilm 100mm x 38m BxL 25,90 


Beschichtete Mikroplatten, 96 Well, 384 Well, 1536 Well für HTS und Zellkultur 

Eine neue Produktlinie unterstützt die HTS Labore bei dem Trend zur Miniaturisierung. 1536 Well Platten haben einen 

Arbeitsbereich von nur noch 1 – 10µl Volumen. Für Labore, die den Schritt der Neuanschaffung geeigneter Geräte für diese 

Platten scheuen, bieten wir eine 384 Niedrigvolumen (5 – 20µl) Platte an. Diese Platte ist kompatibel mit gängigen 

Laborrobotern und Plattenlesegeräten und reduziert Material und Kosten bis zu 80% gegenüber herkömmlichen Platten. Die 

neuen beschichteten 96 und 384 Well Glasbodenplatten bieten herausragende optische Performance für hochauflösende HTS 

Tests. 

Alle Plattenformate können mit einer weiten Palette an Liganden beschichtet werden, inklusive Streptavidin, Avidin, Protein A, 

Protein G, Protein L, Poly-Lysine, Gelatine und Fibronektin sowie Liganden Ihrer Wahl. Darüber hinaus stehen für die HTS 

Tests, die einen Filtrationsschritt als integrierten Teil eines Testes benötigen, beschichtete Filterplatten in den Materialien stehen 

Nitrocellulose, Fiberglas, PVDF, Polycarboat, Polyester und Nylon zur Verfügung. 

Spezielle hoch qualitative Blockierungs-Reagenzien runden den Service ab. Die Platten können, um unspezifische Bindung zu 

verringern, nach der Beschichtung noch mit BSA, BMT-2 oder BMT-4 behandelt werden. Diese Blocker setzten an reaktiven 

Stellen von Glas, Metall, Plastik an und schaffen eine hydrophile Beschichtung. Als Ergebnis wird die nicht spezifische 

Adsorption von gelabelten Proteinen oder Nukleotiden weitgehend reduziert und das "Signal to Noise" Verhältnis der Tests 

maximiert. Die eingesetzten Blocker sind zertifiziert steril, DNase-, RNase und Protease frei. Um dem Anwender am Anfang die 

Optimierung der Nachblockierung zu erleichtern, bieten wir ein "Variety-Pack" bestehend aus je 1 Platte BSA, BMT-2, BMT-4, 

ungeblockt zum Preis der 5-er Packung vorblockiert. (Kat. # VARxxxx, bitte statt xxxx Kat.# der gewünschten 

Platte/Beschichtung einsetzen) 



Alle Platten haben aufgrund herausragender Qualität, steriler Produktionsbedingungen und 

der ensprechenden Vakuumverpackung eine Lebensdauer von bis zu zwei Jahren. Alle 

verwendeten Platten sind von höchster Qualität und sind auch in vielen Varianten, z.B mit 

optisch geschliffenen Glasböden, lieferbar. Falls Sie Ihre Ideal-Platte hier nicht finden - auf 

Anfrage beschichten wir Ihre Liganden auf Ihren Wunschplatten! 

Streptavidin 



96-well Platten (330ul Volumen) 

Biotin Protein A GaR IgG RaG IgG GaM IgG EURO 

10x2 Pl. 

EURO Pre- 

blocked 

10x2 Pl. 

Transparent BS1 BA1 BB1 BPA1 BGR1 BRG1 BGM1 322,00 448,00 

Weiss BS2 BA2 BB2 BPA2 BGR2 BRG2 BGM2 399,00 498,00 

Schwarz BS3 BA3 BB3 BPA3 BGR3 BRG3 BGM3 432,00 526,00 

Weiss -transp 

Boden 

Schwarz - 

transp. Boden 

Natur- 

Glasboden 

Weiss - 

Glasboden 

Schwarz- 

Glasboden 

384-Platten 

(Standard 130ul 

Vol. 

BS4 BA4 BB4 BPA4 BGR4 BRG4 BGM4 490,00 592,00 









Weiss - transp. 

Boden 

Schwarz - 

transp, Boden 

Weiss - 

Glasboden 

Weiss 





1536-Platten BS19 BA19 BB19 BPA19 BGR19 BRG19 BGM19 2297,00 2630,00 

(Volume = 10ul) BS20 BA20 BB20 BPA20 BGR20 BRG20 BGM20 2297,00 2630,00 



Zellkultur Poly-D-lysine/L-Lysine/Collagen Oberflächenmodifizierte Platten 

Poly-D- 

Lysine 

Poly-L- 

Lys 


Typ I 

Collagen 

Hydrophilic 

nicht 

bindend 

Amino- 

Gruppen 


Carboxy- 

Gruppen 

Aldehyd, 

bindet 

Amino 

Gruppen 

Maleimide( 

bindet SH- 

Gruppen ) 

EURO/ 

15 x 2 

Platten 

EURO/ 

15 x 2 

Platten


Transparent BZPD- 

1 

Weiss 

Schwarz 

Weiss - 

transparent 

Schwarz- 

tranparent 

Natur- 

Glasboden 

Weiss - 

Glasboden 

Schwarz- 

Glasboden 

384-Platten 

(Standard 

130ul Vol) 

BZPD- 

2 

BZPD- 

3 

BZPD- 

4 

BZPD- 

5 

BZPD- 

6 

BZPD- 

7 

BZPD- 

8 

BZPD- 

9 


10 

Weiss 

Schwarz 

Weiss - 

transparent 

Schwarz - 

transparent 

Weiss - 

Glasboden 

BZPD- 

11 

BZPD- 

12 

BZPD- 

13 

BZPD- 

14 

BZPD- 

15 

Schwarz-GlasBoden 

384-Platten 

(Low-Volume 

= 25ul) 

Weiss 

Schwarz 

BZPD- 

16 

BZPD- 

17 

BZPD- 

18 

1536-Platten BZPD- 

19 

(Volume = 

10ul) 

Natur 

Weiss 

(Volume = 

10ul) 

Natur 

BZPD- 

20 

BZPD- 

21 

BZPD- 

22 

BZPD- 

20 

BZPD- 

21 

BZPL- 

1 

BZPL- 

2 

BZPL- 

3 

BZPL- 

4 

BZPL- 

5 

BZPL- 

6 

BZPL- 

7 

BZPL- 

8 

BZPL- 

9 

BZPL- 

10 

BZPL- 

12 

BZPL- 

13 

BZPL- 

14 

BZPL- 

15 

BZPL- 

16 

BZPL- 

16 

BZPL- 

17 

BZPL- 

18 

BZPL- 

19 

BZPL- 

20 

BZPL- 

21 

BZPL- 

22 

BZPL- 

20 

BZPL- 

21 

BZC-1 BH-1 BAM-1 BCa-1 BAl-1 BMa-1 415,00 415,00 

BZC-2 BH-2 BaM-2 BCa-2 BAl-2 BMa-2 426,00 426,00 







BZC- 9 BH- 9 BAM- 9 BCa- 9 BAl- 9 BMa- 9 568,00 568,00 


















Weiss 

BZPD- 

22 

BZPL- 

22 


Seitenanfang 


Kisker - Centrifuge tubes 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Quali - Zentrifugengefäße und Etiketten 

Parafilm M 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 







Kat. # Bezeichnung Abmessung Euro 

HP-5075 Parafilm 100mm x 38m (4"x125 ft) BxL 25,90 


Quali - Stickers 'heiss - kalt' 

einsetzbar in Kühlschränken, Cryobehältern ( Flüssigstickstoff bis - 196°C) und in kochendem 

Wasser. 

aus chemisch inertem Polyvinyl, verwendbar auf jeder Art von Plastik, absolut eng anliegend, d.h. 

keine Behinderungen in Geräteeinsätzen, einfach zu handhaben durch Abziehen von 

vorgeschnittener Rolle mit 1000 weissen Etiketten oder auf Bögen für den Einsatz im Laserdruck. 


Kat. # Grösse für Tubes Pack. Einheint Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 Stück 29,00 

HK-95-L 9,5 mm Ø für Laserdruck 3840 Stück 119,00 

HK-13-L 13 mm Ø für Laserdruck 3840 Stück 119,00 

HK-L 32,5 x 13 mm für Laserdruck 2040 Stück 67,95 

Tough-Tags Labels für Mikrozentrifugenröhrchen 

Tough-Tags sind Etiketten aus Polyester für Mikrozentrifugen- oder andere PlastikGefäße. Die Etriketten 

sind reißfest, eng anliegend und können am Gefäß gekocht oder autoklaviert werden. Auch 

Temperaturen bis -20°C halten sie aus, ohne abzufallen. 

Verschiedene Farben und Abmessungen stehen zu Verfügung. Packungseinheit: 1000 Labels/Rolle 

Kat. # Farbe Grösse für Tubes Euro 

file:///F|/Kisker/Kisker/deutsch/centrifuge.htm (1 von 9) [08.12.2005 22:30:51]


HKTT-05-T tranparent 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-W weiß 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-R rot 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-Y gelb 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-B blau 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-G grün 24 x 12,5 mm 0,5 ml 41,70 

HKTT-1.5-T tranparent 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-W weiß 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-R rot 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-Y gelb 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-B blau 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-G grün 32 x 12,5 mm 1,5/2,0 ml 42,50 

Quali - 'Low Retention' Mikrozentrifugengefäße ( Maxymum Recovery Tubes) 

Die transparenten 'Low Retention' Gefäße ersetzen die silikonisierten Gefäße und 

zeichnen sich durch besonders glatte Innenoberflächen aus, die eine optimale 

Probenrückgewinnung gewährleisten. Das seitliche Beschriftungsfeld sowie die plane 

Deckeloberseite bieten Platz zur Kennzeichnung. Die 0,6ml & 1,7ml Gefäße können 

bis zu 20.000xG (2,0ml bis 13.000xG) in allen Zentrifugen eingesetzt werden, sind voll 

autoklavierbar und wurden bei 55 psi getestet. Die Deckel enthalten eine 0,28mm 

Durchstechzone zum Probentransfer. 

Die Tubes werden in hochpolierten Formen mit einer neuen Polymertechnologie ohne 

den Zusatz von Silikon oder Glättungskomponenten produziert. Wie auch die anderen 

Tubes sind sie DNase-, RNase-, pyrogen- und Metall frei. 

1-9 VE 10-19 VE 20+ VE 

Kat. # Volumen Pack.einheit Euro Euro Euro 

G016 0,6ml 1000(2x500) 30,20 28,60 27,15 

G017 1,7ml 500(2x250) 18,40 17,55 16,55 

G018 2,0ml 250 14,90 14,55 14,55 

Quali - Mikrozentrifugengefäße, super klar 

Unser Mikrozentrifugengefäße sind aus 99,9% hochreinem Polypropylen 

garantieren perfekte Klarheit und Chemikalienresistenz. 

farbige Tubes ohne Metallionen, nicht einmal Eisen, Chrom oder Nickel. 

bis zu 20.000xG Force zentrifugierbar, gefrosteten Deckel mit 28mm 

Durchstechzone und seitliches gefrostetes Schreibfeld. 

leichtgängiger und absolut dicht schließender Verschluß. 

? 1,5 und 2,0ml BoilProof Tubes minimieren das Risiko des Aufspringens während 

Erhitzungsphasen 

Unsere Quali - Mikrozentrifugengefäße sind zertifiziert DNase,- RNase-, pyrogen- 

und Metall frei und jetzt auch steril erhältlich. 

1 pck 4-9 pck 10+ pcks 

Kat. # Volumen / Farbe Pack.einheit Euro Euro Euro 

G051-1 0,6ml / klar 1x1000 24,70 23,90 

G051 0,6ml / klar 10x1000 232,00 219,00 210,00 

G052-1 1,7ml / klar 1 x 500 11,85 11,40 

G052 1,7ml / klar 10 x 500 110,00 102,00 98,00 

G052-A 1,7ml / farbig gemischt 1 x 500 12,95 12,10 

G052-B 1,7ml / blau 10 x 500 123,20 117,60 111,95 

G052-G 1,7ml / grün 10 x 500 123,20 117,60 111,95 



G052-R 1,7ml / rot 10 x 500 123,20 117,60 111,95 

G052-O 1,7ml / orange 10 x 500 123,20 117,60 111,95 

G052-V 1,7ml / violett 10 x 500 123,20 117,60 111,95 

G052-Y 1,7ml / gelb 10 x 500 123,20 117,60 111,95 

G052BP 1,5ml / klar / BoilProof 1 x 500 11,80 11,40 10,90 

G053BP 2,0ml / klar / BoilProof 1 x 500 14,90 13,90 12,90 

Quali - Mikrozentrifugengefäße, super klar, steril 

gammasterile Mikrozentrifugengefässe in praktischen kleinen Unterverpackungen 



G051-S 0,6ml/klar/steril 5x100 19,80 19,00 18,10 

G052-S 1,7ml/klar/steril 5 x 50 12,50 11,70 10,90 

G053-S 2,0ml / klar/steril 5 x 50 15,90 14,90 13,90 

Quali - Amber Mikrozentrifugengefäße 

hergestellt aus biologisch inertem Material 

schützt lichtempfindliche 

Proben geeignet für Tieftemperaturlagerung bis -196°C (Gasphase) 

zentrifugierbar bis 20.00 x g 

0,5ml Gefäß freistehend mit langem Stehrand zur Etikettenplazierung 

1-9 VE 10-19 VE 20+ pcks 


G022-AM 0,5ml Tubes ohne V. 500 23,00 21,40 19,80 



CP-AM Schraubverschlüsse 500 39,90 38,50 36,40 

Value Line Mikrozentrifugengefässe 

Aus hochwertigem PP, weitgehend chemikalien- und temperaturbeständig, flacher, durchstechbarer, 

leichtgängiger und dicht schliessender Deckel 

1 VE 6-11 VE 11+ VE 


G056 0,5ml / klar 1 x 1000 15,00 14,00 

G056-10 0,5ml / klar 10 x 1000 128,00 117,00 102,00 

G054 1,5ml / klar 1 x 1000 14,00 13,00 

G054-10 1,5ml / klar 8 x 1000 109,00 94,00 89,90 



G054-B 1,5ml / blau 8 x 1000 109,00 94,00 89,90 

G054-G 1,5ml / grün 8 x 1000 109,00 94,00 89,90 

G054-R 1,5ml / rot 8 x 1000 109,00 94,00 89,90 

G054-Y 1,5ml / gelb 8 x 1000 109,00 94,00 89,90 

G055 2,0ml / klar 8 x 1000 14,00 13,00 

G055-8 2,0ml / klar 8 x 1000 109,00 94,00 89,90 

Quali - Mikrozentrifugengefäße ohne Deckel 

Die Tubes ohne Deckel weisen gleiche Qualitätsmerkmale auf wie Quali- Mikrozentrifugengefäße und sind 

DNase-, RNase,-Pyrogen-und Metall frei. 

1-9 VE 10-19 VE 20 + VE 

Kat. # Volume / Farbe Pack.einheit Euro Euro Euro 

G044 1,5ml / Klar 500 Tubes 10,75 10,20 9,65 

G045 2,0ml / klar 500 Tubes 12,15 11,55 10,95 

Quali - Mikrozentrifugengefäße mit Schraubverschluß 

Quali - Mikrozentrifugengefäße decken einen weiten Bereich der Laboranwendungen wie 

Probensammlung, Zentrifugation, Langzeitlagerung und Verpackung/Versand von z.B. 

Restriktionsenzymen und anderen DNA/RNA modifizierenden Enzymen ab. Die Riffelung erlaubt 

einhändiges Öffnen und Schliessen. Die Gefäße sind aus hochreinem, metallfreien Polypropylen 

gefertigt. Der O-Ring ist resistent gegen Chemikalien wie reine Ether, Hexan, Aceton, Chloroform, 

Acetonitril etc.und gewährt absolute Dichtigkeit.Die Gefäße haben eine plane Deckeloberfläche mit 

Durchstechzone zur einfachen Kennzeichnung, Identifizierung und Probentransfer. Tests in 

Flüssigstickstoff ergaben keine Veränderungen der Struktur, Dichtigkeit und Fexibilität. Die Tubes 

können bis zu 17.000 x g zentifugiert werden und zeichnen sich durch ein patentiertes 

Ausrichtungssystem aus. Dieses Ausrichtungssystem erlaubt den wiederholten Einsatz bei gleicher 

Positionierung in der Zentrifuge ohne Störung der Teilsedimente. Quali - Mikrozentrifugengefäße sind 

zertifiziert DNase- & RNase frei und werden steril mit aufgesetztem Deckel in Packungseinheiten von je 

10 x 50/Beutel = 500 Stück geliefert. Die Tubes können auf Anfrage in 10 verschieden Farben geliefert 

werden, Mindestabnahme / Farbe 4.000 Stück. 

500 tubes 4000 tubes 

Kat. # Form Volumen / Farbe Euro Euro 

G019 Konisch 0,5ml / klar 81,30 506,15 



G022 Freistehend 0,5ml / klar 81,30 506,15 



G019A Konisch 0,5ml / farbig gemischt 506,15 



G022A Freistehend 0,5ml / farbig gemischt 506,15 





Quali - 'True-Lock' Tubes 

True-Lock“ hält Ihre Proben fest verschlossen. Eine Sicherheitslasche am Tube rastet im Deckel ein. Ein 

Aufspringen des Deckels wird auch unter Erhitzung der Probe sicher verhindert. Das Tube ist 

zentrifugierbar, graduiert und tiefgefrierfähig. 

Kat.# Bezeichnung Volumen Pack. Einheit Euro 

G013 True-Lock 1,5 ml 1000 26,90 

Quali - Zentrifugenröhrchen 15 und 50ml - steril 

transparentes Polypropylen mit Schraubverschluss 

konischer Boden 

graduiert 

Kat. # Volumen/Maße Pack.einheit Euro 

G027 50ml/ 30 x 115mm 5 x 20 / steril 25,00 

G027/500 50ml/ 30 x 115mm 25 x 20 / steril 99,00 


Quali - Zentrifugengefäße / Probenröhrchen 

Transparentes Polypropylen mit naturfarbenem Schraubverschluss, Die 30 Tubes sind graduiert. 


G100 13ml/ 16 x 100mm 1000 59,90 

G100-S 13ml/ 16 x 100mm, steril 10x100 / steril 110,00 

G106 15ml/ 20 x 76mm 1000 81,90 


G107 30ml/ 25 x 107mm 500 89,00 

G107-S 30ml/ 25 x 107mm, steril 5 x 100 / steril 115,00 

Zentrifugenröhrchen aus Polystyrol, hochtransparent 

Kat. # Volumen/Maße VE / Form Euro 

G101 12ml/ 16 x 100mm 1000 / zylindrisch 25,40 

G102 13ml/ 16 x 105mm 1000 / konisch 26,50 

G103 3,5ml/ 12 x 55mm 5000 / zylindrisch 69,90 



G104 20ml Diluter Tube/22x62mm 1000 / Flachboden 31,90 


Lamellengriffstopfen, Polyethylen, natur, leichtgängig 

Kat. # Maße VE Euro 

G109 16mm 1000 16,90 

G110 12mm 1000 13,90 

Label - Tape' Markierband 


Arbeits- und Hilfsmitteln im Labor. 

Vorteile: widersteht mehrfachem Autoklavieren ( +121°C ) 

kältebeständig bis –23°C 

beschriftbar mit allen gängigen Stiften, rückstandsfrei abziehbar 


LT-54W weiss 19,1mm x 54m 10,50 

LT-54GR grün 19,1mm x 54m 10,50 

LT-54GE gelb 19,1mm x 54m 10,50 

LT-54BL blau 19,1mm x 54m 10,50 

LT-54RO rot 19,1mm x 54m 10,50 




Probengefäss für 'Coulter Counter' 

Staub- und partikelfreie 25 ml Gefässe aus optisch klarem Polystyrol, dichtem aber leicht aufsetzbaren 

Deckel, parallele Sichtflächen, mattiertes Beschriftungsfeld, 

Kat. # Volumen Euro / 250 Stück Euro / 1000 Stück 

G108 25ml 15,00 45,00 

Euro / 1000 Stück Euro / 2000 Stück 

G108-ALDM 20ml, AL,Linson,Dilab,Mölab 54,90 98,00 

Versandgefässe für die Pathologie 

Klarsichtige Polypropylenausführung mit Schraubverschluss, nahtlos abgerundeter Boden für 

vollständige Probenentnahme, Formaldehydbeständig mit Stehrand 



Kat. # Volumen/ Maße(BxH) VE Euro 

G111 20ml/ 27 x 48mm 1000 95,00 

G112 35ml/ 34 x 55mm 500 55,00 

G113 50ml/ 34 x 75mm 500 68,00 

G114 100ml/ 43 x 88mm 250 44,90 

Zentrifugenröhrchen für Hochgeschwindigkeitsrotoren 

Geeignet für präparative Zentrifugation, Proteinreinigung, Extraktionen, Dichtegradientenzentrifugation, 

Zentrifugation von Biohazard Materialien. 

Auf Anfrage erhältlich mit Dichtungsdeckeln. 

Kat # Vol./ Material/ rpm Maße mm VE Euro 

HR-PA-10 10ml/ PA/ 24.000 16x80 10 49,50 

HR-PC-10 10ml/ PC/ 24.000 16x80 10 49,50 

HR-PE-10 10ml/ PE/ 18.000 16x80 10 48,00 

HR-PF-10 10ml/ PF/ 20.000 16x80 5 71,50 

HR-PP-10 10ml/ PP/ 24.000 16x80 10 48,00 

HR-B-30 30ml/ B/ 5.000 24x105 10 129,00 

HR-PC-30 30ml/ PC/ 24.000 25x92 10 68,00 

HR-PP-30 30ml/ PP/ 24.000 25x92 10 48,00 

HR-PA-30 30ml/ PA/ 24.000 25x92 10 49,50 

HR-PE-30 30ml/ PE/ 10.000 25x92 10 48,00 

HR-PF-30 30ml/ PF/ 24.000 25x92 5 141,00 

HR-PA-50 50ml/ PA/ 20.000 29x103 10 72,70 

HR-PC-50 50ml/PC/ 24.000 29x103 10 72,90 

HR-PE-50 50ml/PE/ 20.000 29x103 10 62,50 

HR-PF-50 50ml/PF/ 20.000 29x103 5 157,00 

HR-PP-50 50ml/PP/ 20.000 29x103 10 72,70 

HR-PA-80 80ml/PA/ 20.000 38x105 10 78,00 

HR-PC-80 80ml/PC/ 20.000 38x105 10 89,00 

HR-PE-80 80ml/PE/ 12.000 38x105 10 74,00 

HR-PF-80 80ml/PF/ 15.000 38x105 5 137,80 

HR-PP-80 80ml/PP/ 20.000 38x105 10 82,90 

HR-PA-250-FB 250ml/PA/ 14.400 62x120, Flachboden 6 69,00 

HR-PC-250-FB 250ml/PC/ 14.400 62x120, Flachboden 6 69,70 

HR-PE-250-FB 250ml/PE/ 13.500 62x120, Flachboden 6 49,80 

HR-PP-250-FB 250ml/PP/ 14.400 62x120, Flachboden 6 61,40 

HR-PA-250-RB 250ml/PA/ 14.400 62x120, Rundboden 6 81,90 

HR-PC-250-RB 250ml/PC/ 14.400 62x120, Rundboden 6 82,90 

HR-PE-250-RB 250ml/PE/ 12.000 62x120, Rundboden 6 69,00 

HR-PP-250-RB 250ml/PP/ 14.400 62x120, Rundboden 6 69,80 

HR-PA-500 500ml/PA/ 9.000 70x165 6 74,80 

HR-PC-500 500ml/PC/ 9.000 70x165 6 94,50 



HR-PE-500 500ml/PE/ 9.000 70x165 6 79,80 

HR-PP-500 500ml/PP/ 9.000 70x165 6 69,80 

Material 

B – Borex Glass PA – Polyallomer PF – Polyflor 

PC – Polycarbonate 

PE – Polyethylene 

PP – Polypropylene 

Passform: 

10 ml Beckmann JA-21, Sigma 12157+12111, Herolab AFH 20.180 

30 ml Sigma 12158, in 50ml Rotoren mittels Adapter 

50 ml 

Sigma 12156/12150, Kontron A8.24/A12.17/AS 4.13/AS 4.7, Beckman JA-20/JS-13/JA-17/JS-7,5, Sorvall SS-34/SA- 

600/HB-4/HS-4 

80 ml 

Kontron A 8.20+AS 4.13-2+AV 8.19, Sorvall GSA+ HS4, Beckmann JA-18+JS-13, Sigma 12159+12155, Herolab AFH 

6.180 

250 ml Kontron A6.14+AS 4.7+AS4.4, Sigma 12254, Beckman JA-14+JS-7.5, Herolab AFH 4.090 

500 ml Kontron A6.9, Beckman JA-10, Sorvall GS-3 

Röhrchen für Ultra-Zentrifugen 

Kat. # Frühere Kontron # Material Nomi.Vol.ml Füll-Vol.ml Maße mm Max.rpm gefüllt VE Euro 

UZ-PC-2 91-90289 PC-dickw. 2 0,6 08x51 45.000 50 121,60 

UZ-PA-2 91-90288 PA-dünnw. 2 1,3 08x51 80.000 50 104,90 

UZ-PA-4,4 91-90212 PA-dünnw. 4,4 3,3 11x60 80.000 50 98,50 

UZ-PC-4,4 91-90214 PC-dickw. 4,4 2,2 11x60 50.000 50 157,40 

UZ-PC-4,4 91-90275 PC, dickw. m.G 4,4 2,7 11x60 50.000 50 272,60 

UZ-PA-5-1 91-90219 PA, dünnw. 5 5 13x51 55.000 50 98,50 

UZ-PA-5-2 91-90224 PA, dickw. 5 3,4 13x51 55.000 50 157,40 

UZ-PA-6,5- 

2 

UZ-PA-6,5- 

1 

91-90228 PA, dickw. 6,5 2,8 13x64 35.000 50 104,90 

91-90227 PA, dünnw. 6,5 5,8 13x64 45.000 50 98,50 

UZ-PC-6,5 91-90229 PC, dickw. 6,5 2,8 13x64 40.000 50 157,40 

UZ-PC-6,5- 

2-G 

91-90241 PC, dickw. m.G. 6,5 4,5 13x64 45.000 50 272,60 

UZ-PA-13,2 91-90221 PA, dünnw. 13,2 11,3 14x89 41.000 50 104,90 

UZ-PA-14 91-90215 PA, dünnw. 14 12 14x95 41.000 50 104,90 

UZ-PC-14 91-90382 PC, dickw. 14 9 14x95 30.000 50 197,00 

UZ-PA-17 91-90217 PA, dünnw. 17 15,8 16x102 28.000 50 104,90 

UZ-PC-17 91-90195 PC, dickw. 17 12,5 16x102 28.000 50 213,70 

UZ-PA-13,5 91-90202 PA, dünnw. 13,5 11 16x76 80.000 50 104,90 

UZ-PC-13,5- 

2 

UZ-PC-13,5- 

2G 

UZ-PA-38,5- 

1 

91-90205 PC, dickw. 13,5 8,5 16x76 40.000 50 197,10 

91-90235 PC, dickw. mit Gewinde 13,5 9,5 16x76 40.000 50 392,90 

91-90196 PA; dünnw. 38,5 34 25x89 70.000 50 104,90 



UZ-PC-38,5- 

2 

UZ-PA-38,5- 

2G 

91-90198 PC, dickw. 38,5 29 25x89 45.000 50 157,40 

91-90236 PA, dickw.m.G. 38,5 32,5 25x89 50.000 50 458,20 

UZ-PC-94-2 91-90209 PC, dickw. 94 77 38x102 45.000 25 197,10 

UZ-PC-94-2- 

G 

91-90237 PC, dickw. m.G. 94 88 38x102 40.000 25 262,40 

Seitenanfang 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Parafilm M 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Parafilm is a soft, waterproof, halftransparent ilm for Laboratory use to close tubes and vessels. Parafilm 

does not smell, resistant against alkohol, acids and basic fluids in week concentrationes 


Cat. # Description Dimensions Euro 

HP-5075 Parafilm 100mmx38m (4inchx125ft) WxL 25,90 



Labels precutted for tubes 0,2 - 2,0ml, convenient to use, simply write on the label, peel of from the 

backing paper and press into position on the tube. Temperature resistant from -196°C to 121°C. 

Quali - stickers adhere to all plastics, th 


Cat. # Size For tubes Pack size Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 29,00 

HK-95-L 9,5 mm Ø for Laserprint 3840 119,00 

HK-13-L 13 mm Ø for Laserprint 3840 119,00 

HK-L 32,5 x 13 mm for Laserprint 2040 67,95 

Tough-Tags Labels for Microcentrifuge tubes 

Tough-Tags labels made from polyester are designed for all types of microcentrifuge tubes or other 

plastic vessels. The labels are available in different colors and usable up to -20°C 

Packaging unit: 1000 Labels/Roll 

Cat. # Color Size for Tubes Euro 


file:///F|/Kisker/Kisker/centrifuge.htm (1 von 9) [08.12.2005 22:30:53]


HKTT-05-W white 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-R red 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-Y yellow 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-B blue 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-G green 24 x 12,5 mm 0,5 ml 41,70 


HKTT-1.5-W white 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-R red 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-Y yellow 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-B blue 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-G green 32 x 12,5 mm 1,5/2,0 ml 42,50 

Quali - "Low Retention" Microcentrifuge Tubes ( formerly Siliconized Tubes ) 

Those clear Low Retention" tubes are replacing the formerly produced siliconized 

microcentrifuge tubes. These tubes feature extremly low adhesion for optimal 

recovery of samples. Through a new polymer technology there are no silicons or 

lubricans added. 

1-9 pcks 10-19pck 20+ pcks 

Cat. # Volume Pack size Euro Euro Euro 

G016 0,6ml 1000(2x500) 30,20 28,60 27,15 

G017 1,7ml 500(2x250) 18,40 17,55 16,55 

G018 2,0ml 250 14,90 14,55 14,00 


Our microcentrifuge tubes are made from 99,9% pure polypropylen without fillers or 

heavy metals. Our colorants do not contain any metallic ion, not even the usual iron, 

chromium or nickel used in dyes. The microcentrifuge tubes do resist 20.000xG 

force, h 


Cat. # Volume / color Pack size Euro Euro Euro 

G051-1 0,6ml / clear 1x1000 24,70 23,90 

G051 0,6ml / clear 10x1000 232,00 219,00 210,00 

G052-1 1,7ml / clear 1 x 500 11,85 11,40 

G052 1,7ml / clear 10 x 500 110,00 102,00 98,00 

G052-A 1,7ml / colored mixed 1 x 500 12,95 12,10 

G052-B 1,7ml / blue 10 x 500 123,20 117,60 111,95 

G052-G 1,7ml / green 10 x 500 123,20 117,60 111,95 

G052-R 1,7ml / ret 10 x 500 123,20 117,60 111,95 

G052-O 1,7ml / orange 10 x 500 123,20 117,60 111,95 

G052-V 1,7ml / pink 10 x 500 123,20 117,60 111,95 

G052-Y 1,7ml / yellow 10 x 500 123,20 117,60 111,95 

G052BP 1,5ml / clear / BoilProof 1 x 500 11,80 11,40 10,90 



G053BP 2,0ml / clear / BoilProof 1 x 500 14,90 13,90 12,90 





G051-S 0,6ml/clear/steril 5x100 19,80 19,00 18,10 

G052-S 1,7ml/clear/steril 5 x 50 12,50 11,70 10,90 

G053-S 2,0ml / clear/steril 5 x 50 15,90 14,90 13,90 




tubes useful for deep temperature storage up to -196°C (gasphase) 


0,5ml tube freestanding with place for labeling 

1-9 VE 10-19 VE 20+ pcks 

Cat. # Volumen / color Pack.unit Euro Euro Euro 

G022-AM 0,5ml tubes without cap 500 23,00 21,40 19,80 



CP-AM caps 500 39,90 38,50 36,40 


made from PP, mostly chemical- and temperature resistant, flat, pierable, easy to handle and shut tightly lid 

1 Unit 6-11 Units 11+ Units 

Cat. # Volume / Color Pack.Unit Euro Euro Euro 

G056 0,5ml / clear 1 x 1000 15,00 14,00 

G056-10 0,5ml / clear 10 x 1000 128,00 117,00 102,00 

G054 1,5ml / clear 1 x 1000 14,00 13,00 

G054-10 1,5ml / clear 8 x 1000 109,00 94,00 89,90 

G054-B 1,5ml / blue 8 x 1000 109,00 94,00 89,90 

G054-G 1,5ml / green 8 x 1000 109,00 94,00 89,90 

G054-R 1,5ml / ret 8 x 1000 109,00 94,00 89,90 

G054-Y 1,5ml / yellow 8 x 1000 109,00 94,00 89,90 

G055 2,0ml / klar 8 x 1000 14,00 13,00 



G055-8 2,0ml / klar 8 x 1000 109,00 94,00 89,90 


The capless tubes have same features as our microcentrifuge tubes and are DNase-, RNase,- pyrogen- and 

metal free. 

1-9 packs 10-19pck 20+pck 


G044 1,5ml / clear 500 tubes 10,75 10,20 9,65 


Quali - Screw Cap Tubes 

Quali - Screw Cap Tubes serve a broad range of laboratory needs, including collection, processing, 

centrifugation, long term storage and OEM packaging, shipping of restriction enzymes or other 

DNA/RNA modifying enzymes. The threaded "O"-ring des 


Cat. # Form Volume / Color Euro Euro 

G019 conical 0,5ml / clear 81,30 506,15 



G022 freestanding 0,5ml / clear 81,30 506,15 



G019A conical 0,5ml / colored mix 506,15 



G022A freestanding 0,5ml / colored mix 506,15 



Quali - "True-Lock“ Tubes 

True Lock provides a simple and safe security for your samples. The locking system prevents the cap coming 

open. 

Cat.# Description Volume Pack. Unit Euro 



G013 True-Lock 1,5 ml 1000 26,90 

Quali - Centrifuge tubes 15 und 50ml - steril 

transparent Polypropylen with blue Screw cap 

conical bottom 

graduated 

Cat. # Volumen/dimension Pack.unit Euro 





Made from transparente polypropylen with screw cap, the 30ml tubes are graduated. 

Cat. # Volumen/dimension Pack.Unit Euro 

G100 13ml/ 16 x 100mm 1000 59,90 


G106 15ml/ 20 x 76mm 1000 81,90 


G107 30ml/ 25 x 107mm 500 89,00 



Cat. # Volumen/dimension Unit / Form Euro 

G101 12ml/ 16 x 100mm 1000 / cylindric 25,40 

G102 13ml/ 16 x 105mm 1000 / conical 26,50 

G103 3,5ml/ 12 x 55mm 5000 / cylindric 69,90 

G104 20ml Diluter Tube/22x62mm 1000 / flatt bottom 31,90 





Cat. # dimension Unit Euro 

G109 16mm 1000 16,90 

G110 12mm 1000 13,90 



Advantages: widstanding manifold autoclaving ( +121°C ) 

deep temperature resistant up to -23°C 

to use with most pens 


LT-54W white 19,1mm x 54m 10,50 



LT-54BL blue 19,1mm x 54m 10,50 

LT-54RO red 19,1mm x 54m 10,50 



LT-54RH holder for rols 1 73,95 


Dust- and partikel free 25 ml tubes made from optical clear polystyrene, tight lid, parallele viewing areas, 

writing area 

Cat. # Volume Euro / 250 Stück Euro / 1000 tubes 

G108 25ml 15,00 45,00 

Euro / 1000 Stück Euro / 2000 tubes 



Clear polypropylene with screw cap, rounded bottom for complete sample deloading, freestanding 

resistant to formaldehyde mit Stehrand 

Cat. # Volume / Dimension(WxH) Pack unit Euro 

G111 20ml/ 27 x 48mm 1000 95,00 

G112 35ml/ 34 x 55mm 500 55,00 

G113 50ml/ 34 x 75mm 500 68,00 

G114 100ml/ 43 x 88mm 250 44,90 

Centrifugetubes for High Spped Rotors 



useful for preparative centrifugation, proteinpurification, extraction, density gradient centrifugation, 

centrifugation of biohazard materiales. Lids on request. 

Kat # Vol./Material Dimension mm Pack unit Euro 

HR-PA-10 10ml/ PA/ 24.000 16x80 10 49,50 

HR-PC-10 10ml/ PC/ 24.000 16x80 10 49,50 

HR-PE-10 10ml/ PE/ 18.000 16x80 10 48,00 

HR-PF-10 10ml/ PF/ 20.000 16x80 5 71,50 

HR-PP-10 10ml/ PP/ 24.000 16x80 10 48,00 

HR-B-30 30ml/ B/ 5.000 24x105 10 129,00 

HR-PC-30 30ml/ PC/ 24.000 25x92 10 68,00 

HR-PP-30 30ml/ PP/ 24.000 25x92 10 48,00 

HR-PA-30 30ml/ PA/ 24.000 25x92 10 49,50 

HR-PE-30 30ml/ PE/ 10.000 25x92 10 48,00 

HR-PF-30 30ml/ PF/ 24.000 25x92 5 141,00 

HR-PA-50 50ml/ PA/ 20.000 29x103 10 72,70 

HR-PC-50 50ml/PC/ 24.000 29x103 10 72,90 

HR-PE-50 50ml/PE/ 20.000 29x103 10 62,50 

HR-PF-50 50ml/PF/ 20.000 29x103 5 157,00 

HR-PP-50 50ml/PP/ 20.000 29x103 10 72,70 

HR-PA-80 80ml/PA/ 20.000 38x105 10 78,00 

HR-PC-80 80ml/PC/ 20.000 38x105 10 89,00 

HR-PE-80 80ml/PE/ 12.000 38x105 10 74,00 

HR-PF-80 80ml/PF/ 15.000 38x105 5 137,80 

HR-PP-80 80ml/PP/ 20.000 38x105 10 82,90 

HR-PA-250- 

FB 

HR-PC-250- 

FB 

HR-PE-250- 

FB 

HR-PP-250- 

FB 

HR-PA-250- 

RB 

HR-PC-250- 

RB 

HR-PE-250- 

RB 

HR-PP-250- 

RB 

250ml/PA/ 14.400 62x120, Flat bottom 6 69,00 

250ml/PC/ 14.400 62x120, Flat bottom 6 69,70 

250ml/PE/ 13.500 62x120, Flat bottom 6 49,80 

250ml/PP/ 14.400 62x120, Flat bottom 6 61,40 

250ml/PA/ 14.400 62x120, Round bottom 6 81,90 

250ml/PC/ 14.400 62x120, Round bottom 6 82,90 

250ml/PE/ 12.000 62x120, Round bottom 6 69,00 

250ml/PP/ 14.400 62x120, Round bottom 6 69,80 

HR-PA-500 500ml/PA/ 9.000 70x165 6 74,80 

HR-PC-500 500ml/PC/ 9.000 70x165 6 94,50 

HR-PE-500 500ml/PE/ 9.000 70x165 6 79,80 



HR-PP-500 500ml/PP/ 9.000 70x165 6 69,80 

Material 

B - Borex Glass? PA - Polyallomer PF - Polyflor? 

PC - Polycarbonate 

PE - Polyethylene 

PP - Polypropylene 

direct fitting to 


30 ml Sigma 12158, in 50ml rotors by adapter 

50 ml 

Sigma 12156/12150, Kontron A8.24/A12.17/AS 4.13/AS 4.7, Beckman JA-20/JS-13/JA-17/JS-7,5, Sorvall SS-34/SA- 

600/HB-4/HS-4 

80 ml 

Kontron A 8.20+AS 4.13-2+AV 8.19, Sorvall GSA+ HS4, Beckmann JA-18+JS-13, Sigma 12159+12155, Herolab AFH 

6.180 

250 ml Kontron A6.14+AS 4.7+AS4.4, Sigma 12254, Beckman JA-14+JS-7.5, Herolab AFH 4.090 



Cat. # 

previous Kontron 

# 

material nominal Vol.ml Filling-Vol.ml size mm Max.rpm gefüllt VE Euro 

UZ-PC-2 91-90289 PC-thickwall 2 0,6 08x51 45.000 50 121,60 

UZ-PA-2 91-90288 PA-dünnw. 2 1,3 08x51 80.000 50 104,90 

UZ-PA-4,4 91-90212 PA-dünnw. 4,4 3,3 11x60 80.000 50 98,50 

UZ-PC-4,4 91-90214 PC-thickwall 4,4 2,2 11x60 50.000 50 157,40 


UZ-PA-5-1 91-90219 PA, thinnw. 5 5 13x51 55.000 50 98,50 

UZ-PA-5-2 91-90224 PC-thickwall 5 3,4 13x51 55.000 50 157,40 

UZ-PA-6,5- 

2 

UZ-PA-6,5- 

1 

91-90228 PC-thickwall 6,5 2,8 13x64 35.000 50 104,90 

91-90227 PA, thinnw. 6,5 5,8 13x64 45.000 50 98,50 


UZ-PC-6,5- 

2-G 

UZ-PA- 

13,2 

91-90241 


thread 

6,5 4,5 13x64 45.000 50 272,60 

91-90221 PA, thinnw. 13,2 11,3 14x89 41.000 50 104,90 

UZ-PA-14 91-90215 PA, thinnw. 14 12 14x95 41.000 50 104,90 

UZ-PC-14 91-90382 PC-thickwall 14 9 14x95 30.000 50 197,00 

UZ-PA-17 91-90217 PA, dünnw. 17 15,8 16x102 28.000 50 104,90 

UZ-PC-17 91-90195 PC-thickwall 17 12,5 16x102 28.000 50 213,70 

UZ-PA- 

13,5 

UZ-PC- 

13,5-2 

UZ-PC- 

13,5-2G 

91-90202 PA, thinnw. 13,5 11 16x76 80.000 50 104,90 

91-90205 PC-thickwall 13,5 8,5 16x76 40.000 50 392,90 

91-90235 


thread 

file:///F|/Kisker/Kisker/centrifuge.htm (8 von 9) [08.12.2005 22:30:53] 

13,5 9,5 16x76 40.000 50 197,10


UZ-PA- 

38,5-1 

UZ-PC- 

38,5-2 

UZ-PA- 

38,5-2G 

UZ-PC-94- 

2 

UZ-PC-94- 

2-G 

91-90196 PA, thinnw. 38,5 34 25x89 70.000 50 104,90 

91-90198 PC-thickwall 38,5 29 25x89 45.000 50 157,40 

91-90236 


thread 

38,5 32,5 25x89 50.000 50 458,20 

91-90209 PC-thickwall 94 77 38x102 45.000 25 197,10 

91-90237 


thread 

file:///F|/Kisker/Kisker/centrifuge.htm (9 von 9) [08.12.2005 22:30:53] 

94 88 38x102 40.000 25 262,40 

Top of Page

Kisker-Biotech Racksystems 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 







bench 





Ice Cool Buckets are constructed of durable plastic and offer both robustness and long life. 

They are durable skinned to provide long term storage of ice. In addition they are easily 

cleaned and their lips ensure easy handling. Fitting to the buckets are available acrylracks 

for the handling of microtubes in the ice. 

dimensions: KR-ICL: upper lipp 185x185mm, base 100x100mm, depth 175mm 


Cat. #. description Euro 

KR-ICL ice cool bucket 4 Liter 59,00 

KR-ICS ice cool bucket 1,4 Liter 49,00 

KR-IC40 Rack for 40 x 0,5ml tubes 34,00 

KR IC16 Rack for 16 x 0,5/16 x1,5ml tubes 34,00 




Acryl-racks for 50ml Falcon-tubes or tubes up to 29mm diameter 

Acryl-racks for 1,5 and 2,0ml microtubes or bis 10,7mm diameter 


Cat. #. Description outer dimensions mm Euro 

ST-A-10 10-place rack 230 x 90 x 100 42,00 

file:///F|/Kisker/Kisker/rack.htm (1 von 8) [08.12.2005 22:30:55]





Pipettorstand 



material: easy to clean, 3mm thick acryl 

outer dimension: 20 x 12 x 10cm w x h x d 

Cat. # Description Pack.unit Euro 

R048 Pipettorstand, 4 places 1 31,90 

Tube Racks 

These racks made from autoclavable polypropylen are ideal for storage and drying of tubes 

are glas plates for electrophoresis 

they can also be used in a waterbath and drainage holes will cause racks to sink 

Cat. # places dimensions Euro 

R049-50 50 tubes 14-17mm 178x95x63 mm LxWxH 9,90 

R049-80 80 tubes 10-13mm 228x89x60mm LxWxH 8,90 

Combi-Rack 

The 4-way rotatable Combi Rack is designed to accept a variety of tube sizes. The rack may be 

used place saving on a bench top or under a hood. It is manufactured from polypropylen and can be 

autoclaved or stored in a freezer up to -80°C. The racks can be fitted together on the flat sides, to 

get a higher number of storage possibilities. For better identification of the samples, the places are 

coded numerically. Following tubes can be placed: 


32 x 12 x75 mm tubes or 32 x 1,5/2,0ml tubes or 32 x 0,5 ml tubes 

Cat. # Color Pack size Euro 

R001 neon mix 5 racks 39,90 

R001-B neon blue 1 rack 9,45 

R001-GR neon green 1 rack 9,45 

R001-GE neon yellow 1 rack 9,45 

R001-O neon orange 1 rack 9,45 

R001-P neon pink 1 rack 9,45 




Based on the popular Combi Rack prinziple it has a bigger dimension (100 x 100 x 200mm) 


* 8 x 50ml conical centrifuge tubes 

* 20 x 20mm Ø tubes 


* 40 x 1,5/2,0ml tubes (13mm Ø) 


R029-B neon blue 1 20,35 


The Tube Cube System is also a 4-way rack consisting of 4 independent cubes, placed in a clear support tray. 

It is made of polypropylen and can be used in a freezer and be autoclaved. Each rack can be rotated 

indepently and following tubes can be accommodated in each rack: 

15ml und 50ml conical tubes 

12 x 75mm tubes 




1,5ml und 2,0 ml centrifuge tubes 


R002 Neon mixed 4 Racks in tray 49,95 


These very often used racks are ideal for storage, inventory and bench top work rack for 1,5ml and 

2,0ml tubes. Made of durable polypropylen, it can be autoclaved and stored down to -80°C. The 80 

sample wells have a conical shape to concentrate samples collected directly into the rack. Each rack 

has a frosted labeling area and the wells, positioned in 5 rows with 16 places are numerical coded for 

easy identification. With use of the clear lids (R004), the racks can be stacked easy. 

Cat. # Description / Color Pack size Euro 

R003 Racks natural 5 racks 19,20 

R003-1 Racks natural 1 rack 4,10 

R003-A Racks neon mix 5 racks 19,90 

R003-FB Rack neon blue 1 rack 4,10 

R003-FG Rack neon green 1 rack 4,10 

R003-FO Rack neon orange 1 rack 4,10 

R003-FP Rack neon pink 1 rack 4,10 

R003-FY Rack neon yellow 1 rack 4,10 


Made from autoclavable polypropylene, numericale places, 2 rows with 10 places each 




cat.# Description / Color Pack size Euro 

R046-B TwoRow Rack, blue 1 rack 4,10 

R046-R TwoRow Rack, red 1 rack 4,10 

R046-W TwoRow Rack, white 1 rack 4,10 



96-Well Reversable Rack with snap in place lid for 0,5ml & 1,5/2,0 ml Tubes 

A user-friendly work and storage rack for 96 x 1,5/2,0ml tubes on one side & 96 x 0,5ml 

tubes on the other side. Made from autoclavable Polypropylene with longer handels, 

alpha numeric coding at the wells, labeling area on the lid. Colored pack includes blue, 

green, pink, yellow, orange 

Cat. # Description Color/ quantity Euro 

R041-1 96-Rev.Rack w.Lid natural/ 1 rack 8,70 

R041 96-Rev.Rack w.Lid natural/ 5 pack 42,90 

R041-A 96-Rev.Rack w.Lid colored/ 5 pack 43,90 

R041-B 96-Rev.Rack w.Lid blue/ 1 rack 8,70 

R041-GR 96-Rev.Rack w.Lid green/ 1 rack 8,70 

R041-Y 96-Rev.Rack w.Lid yellow/ 1 rack 8,70 


These double sided racks are made from durable polypropylen. The wide spacing allows easy 

handling and storage on one side of 64/96 x 1,5/2,0ml tubes, on the reverse side of 64/96 x 

0,5ml.The racks are autoclavable,identification of samples is easy through the alpha-numerical 

coding and the frosted writing area on the sides. Available as option is a transparent lid for storage 

or mixing tubes placed in the rack. 

Dimensions: 64 place Rack: 13,1 x 13,4 x 4,2 or 5,0cm (WxLxH, 2 lid positions) 

96 place Rack: 11,8 x l2,3 x 4,7 or 4,9cm ( WxLxH, 2 lid positions) 

Cat. # No. of places Pack size/ Color Euro 

R006 64 5 racks neon mix 35,90 

R007 64 5 racks natural 30,90 

R006-B 64 1 rack neon blue 8,20 

R006-G 64 1 rack neon green 8,20 

R006-O 64 1 rack neon oran. 8,20 

R006-P 64 1 rack neon pink 8,20 

R006-Y 64 1 rack neon yellow 8,20 

R008 Lid for 64 rack 1 lid natural 2,95 












Autoclavable polypropylene rack for storage or working with 0,2ml Tubes, 8 or 12 tube strips. 

Removable hinged lid, open wells for placing in ice bath, imprinted alpha-numerical system. 

Available in packs of 5 natural or colored (blue, green, pink, yellow, orange). 

Cat.# description quantity Euro 

R040-N PCR-Rack,natural 5 25,95 

R040-A PCR-Rack,colored mix 5 25,95 

R040-B PCR-Rack,blue 1 5,50 

R040-G PCR-Rack,green 1 5,50 

R040-Y PCR-Rack,yellow 1 5,50 


A reversable polypropylene rack with a simple to use removable hinged lid, that snaps in place on 

both sides 

Side 1: places for 168 x 0,2ml tubes (also for tubes in strip-form) and 12 x 1,5ml tubes 

Side 2: places for 40 x 0,5ml and 12 x 1,5ml tubes 

Cat.# description Color/ Quantity Euro 

R044-1 96-Rev. Rack mit Deckel natural/ 1 rack 12,80 

R044 96-Rev. Rack mit Deckel natural/ 5 racks 54,80 

R044-A 96-Rev. Rack mit Deckel colored/ 5 racks 54,80 




offered in clear PVC non-sterile 

Cat.# description Pack size Euro 



The PCR Workstation offers places for all tubes, needed for pre or post PCR applications. The PCR 

Workstation is a combination of a basic rack, which accepts 24 x 1,5/2,0ml tubes, 16 x 0,5ml tubes 

und 32 x 0,2ml tubes and a 96 place "Satelite" rack, which clips onto the workstation (over the 

existing 0,2ml holes). This "Satelite" rack accomodates all 0,2ml PCR tube configurations, like single 

tubes, 8-strip-tubes, 12-strip tubes and PCR plates. All tube wells of the racks have an alphanumeric 

identification system. The PCR Workstation can be used at temperatures down to -80°C. 

The "Satelite" racks is available also in packs of 5 separately without the PCR-Workstation. 





R028-G neon green 1 19,95 

R028-O neon orange 1 19,95 

R028-P neon pink 1 19,95 

R028-Y neon yellow 1 19,95 

R028-S Satelite rack w.Lid 5 racks neon mix 37,90 

VariRack 

This rack is designed as the name suggests. It offers a combination of storage solutions in a single rack. The 

rack is made from polypropylen, autoclavable, freezable to -80°C and features an alphanumeric coding. It is 

supplied including lid and has following dimensions: 

168 x 82 50mm ( LxWxH including lid) 

stores following tubes:1.side:32 x 1,5/2,0ml + 8 x 0,5ml 

2. side:32 x 0,5ml + 8 x1,5/2,0ml 

Cat. # Pack.unit Euro 



Latex Disposable Gloves 

Our gloves are very comfortable soft blue nitrile gloves, which provide a highly sensitive touch 

with extreme puncture. 



length: 24cm 


MLG-XS Latex powderfree extra small 59,00 

MLG-S Latex powderfree small 59,00 

MLG-M Latex powderfree medium 59,00 

MLG-L Latex powderfree large 59,00 


Our gloves are very comfortable soft blue nitrile gloves, which provide a highly sensitive touch with extreme 

puncture. They are extremly resistant against chemicals , especialy acrylamide and ethidium bromide which is 

used in many labs for gel staining procedures.Latex gloves do not provide saftey against ethidium bromide, 

because it passes latex in less than 1 minute. 






- length: 24cm 


Cat. # Description size Euro 

MNG-SS-S Nitrile Gloves SafeSkin small 149,95 

MNG-SS-M Nitrile Gloves SafeSkin medium 149,95 

MNG-SS-L Nitrile Gloves SafeSkin large 149,95 

MNG-NT-S Nitrile Gloves Nitratex small 118,00 

MNG-NT-M Nitrile Gloves Nitratex medium 118,00 

MNG-NT-L Nitrile Gloves Nitratex large 118,00 




The slide boxes have cork liming on the bottom, to protect the slides. On the inside cover of the box is a 

corresponding inventory slide sheet. The boxes can be stored securely on top of each other and are closed 

with a rust resistant nickel plated clasp ande hinge pin.Dimensions are 222 x 171 x 33mm ( LxWxH ) 

Optional we offer stainless steeel freezer racks to store the slide boxes in upright freezers for longtime 

storage of temperature sensitive samples. You find infos and prices in the chapter CRYO PRODUCTS. 

cat.# Color Pack size Euro 

R100-B blue 1 5,95 

R100-G green 1 5,95 

R100-Y yellow 1 5,95 

R100-R red 1 5,95 

R100-W white 1 5,95 

R100-GRA grey 1 5,95 

R100-SCH black 1 5,95 

Stainless steel racks for Upright freezer 

These racks are made to store our slideboxes into upright freezer under deep temperature 

conditions. 

Cat.# number of boxes W x L x H in mm Euro 

OSG-5/2 5 high x 2 deep 187 x 466 x 189 190,00 









The embedding cassettes are useful for paraffin-embedding of histological cuts. The cassetts are 

easy to write on the side and are resistant to solvents and decalcifying agents.We offer them in 

seven different colors 




packaging unit: 500 cassettes 

Cat.# type of cassette color Euro 

HBK-W Biopsy white 39,95 

HBK-RA Biopsy pink 39,95 

HBK-G Biopsy green 39,95 

HBK-Y Biopsy yellow 39,95 



HBK-B Biopsy blue 39,95 

HBK-R Biopsy red 39,95 

HBK-GRA Biopsy grey 39,95 

HUK-W Universal white 39,95 

HUK-RA Universal pink 36,95 

HUK-G Universal green 36,95 

HUK-Y Universal yellow 36,95 

HUK-B Universal blue 36,95 

HUK-R Universal red 36,95 

HUK-GRA Universal grey 36,95 

HSK-W Standard white 26,95 

HSK-RA Standard pink 26,95 

HSK-G Standard green 26,95 

HSK-Y Standard yellow 26,95 

HSK-B Standard blue 26,95 

HSK-R Standard red 26,95 

HSK-GRA Standard grey 26,95 

PAP PEN 


drawn around a specimen. The barrier of the PAP PEN retains antisera within 

the defined area and ensures, that only the amount of antobody needed for 

sufficient reaction is used. The PAP PEN stops spreading, reduces waste and 

divides slides into discret areas for immunostaining, histology, cytology, cell 

culture, virology, microbiology. The PAP PEN is effective for immunostaining, 

PAP method, ABC method, ASD method, enzyme and frozen section 

methods. 

The staining is unsoluble in aceton and alcohol and can be removed if desired 

by xylene after the staining procedure. 

Cat. # Description Euro 

MKP-1 Pap Pen Immunostaining Pen 45,00 

MKP-2 Pap Pen Immunostaining Pen, extra thick 58,90 

file:///F|/Kisker/Kisker/rack.htm (8 von 8) [08.12.2005 22:30:55] 

Top of Page


Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 





PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 







& DNA 

Measurement 





Eisbehälter 

Die Eisbehälter sind aus langlebigem, doppelhäusigem Plastik mit Styroporfüllung. Sie sind 

geeignet zur Zwischenlagerung bei der Probenpräparation. Die glatte Oberfläche lässt sich 

leicht reinigen, die überstehenden Kanten dienen als Tragegriff. Zusätzlich erhältlich sind 

passende Acrylracks, die in Eis plaziert, die Lagerung der Mikrotubes vereinfacht. 

Maße: KR-ICL: Oberkante 185x185mm, Basis 100x100mm, Tiefe 175mm 


Kat. #. Beschreibung Euro 

KR-ICL Eisbehälter 4 Liter 59,00 

KR-ICS Eisbehälter 1,4 Liter 49,00 

KR-IC40 Rack für 40 x 0,5ml Tubes 34,00 

KR IC16 Rack für 16 x 0,5/16 x1,5ml Tubes 34,00 



Ständer aus Acryl für Mikrozentrifugengefäße und 50ml Falcon-Tubes 

Acrylständer für 50ml Falcon-Tubes bzw. Röhrchen bis 29mm 

Durchmesser 

Acrylständer für 1,5 und 2,0ml Reaktionsgefäße bzw. bis 10,7mm 

Durchmesser 


Kat. #. Beschreibung Außenmaße Euro 

ST-A-10 Ständer für 10 Plätze 230 x 90 x 100 42,00 

file:///F|/Kisker/Kisker/deutsch/rack.htm (1 von 8) [08.12.2005 22:30:57]





Pipettenständer 

Ergonomisch: zur Pipettenaufnahme leicht zugeneigt 

universell für alle Pipetten passend 

Material: leicht zu reinigendes, 3mm starkes Acryl 

Aussenmaße: 20 x 12 x 10cm B x H x T 


R048 Pipettenständer, 4 Plätze 1 31,90 

Röhrchen- und Glashalter 

Gestelle aus autoklavierbarem Polypropylen sind vielseitig verwendbar. 

Abtropfgestell für Elektrophorese-Glasplatten 

Einsatz im Wasserbad, nicht schwimmend 

Halterung oder Abtropfgestell für Röhrchen 

Kat. # Stellplätze Maße Euro 

R049-50 50 Tubes 14-17mm 178x95x63 mm LxBxH 9,90 

R049-80 80 Tubes 10-13mm 228x89x60mm LxBxH 8,90 

Combi-Rack 

Dieses System mit vier individuellen Seiten ermöglicht auf äußerst platzsparende Weise die 

Aufnahme verschiedener Gefäße. Die Racks aus stabilem Polypropylen sind koppelbar, bis - 80 C° 

einsatzfähig sowie bei 121 °C autoklavierbar. Zur besseren Identifizierung sind die Plätze 

nummeriert. Das System steht in 5 verschiedenen Neonfarben zur Verfügung. Folgende Gefäße 

können aufgenommen werden: 4 x 50 ml konische Gefäße, 12 x 15 ml konische Gefäße 32 x 12 x75 

mm Gefäße; 32 x 1,5/2,0ml Gefäße 32 x 0,5 ml Gefäße 

Kat. # Farbe Pack.einheit Euro 

R001 neon mix 5 Racks 39,90 

R001-N natur 1 Rack 9,45 

R001-B neon blau 1 Rack 9,45 

R001-GR neon grün 1 Rack 9,45 

R001-GE neon gelb 1 Rack 9,45 

R001-O neon orange 1 Rack 9,45 

R001-P neon pink 1 Rack 9,45 




Basierend auf unserem populärem Combi Rack aber mit größeren Abmessungen (100 x 100 x 200mm) für 

folgende Röhrchen: 8 x 50ml / 20 x 20mm Ø Tubes / 24 x 15ml / 40 x 1,5/2,0ml Tubes (13mm Ø) 

Kat. # Farbe Pack .einheit Euro 

R029-B neon blau 1 20,35 


Das Tube Cube System ist ein platzsparendes Rack-System in einer Halteschale. Durch jeweiliges Drehen 

der Racks steht eine andere Bohrung zur Aufnahme der unterschiedlichen Gefäße zur Verfügung. Die 

autoklavierbaren und einfrierbaren Racks können an allen Laborplätzen eingesetzt werden. Das System ist 

geeignet zur Aufnahme folgender Gefäße: 15ml und 50ml konische Röhrchen 12 x 75mm Kulturröhrchen 13 x 

100mm Kulturröhrchen 16 x 12,5 mm Kulturröhrchen 17 x 100 mm Kulturröhrchen 1,5ml und 2,0 ml 

Zentrifugengefäße 

Kat. # Farbe Pack.einh. Euro 

R002 Neon mix 4 Racks mit Tray 49,95 

Fraktionssammler - Racks 

Ein bewährtes Modell mit 80 Plätzen, welches sich auch als Halterung für 1,5ml und 2,0 ml 

Mikrozentrifugengefäße eignet. Die Positionen sind in 5 Reihen à 16 angeordnet. Auf Grund des 

stabilen Polypropylens kann das Rack bei Tieftemperaturen bis -80°C eingesetzt werden und 

autoklaviert werden. Die Racks weisen seitlich eine gerauhte Fläche zur Beschriftung auf. Zur 

einfacheren Aufbewahrung können die Racks durch die Verwendung von Deckeln (R004) gestapelt 

werden. 

Kat.Nr. Farbe/Beschreib. Pack.einheit Euro 

R003 Racks transparent 5 Racks 19,20 

R003-1 Racks transparent 1 Racks 4,10 

R003-A Racks neon mix 5 Racks 19,90 

R003-FB Rack neon blau 1 4,10 

R003-FG Rack neon grün 1 4,10 

R003-FO Rack neon orange 1 4,10 

R003-FP Rack neon pink 1 4,10 

R003-FY Rack neon gelb 1 4,10 


Aus autoklavierbarem Polypropylen, numerierte Stellplätze, 2 Reihen zu 10 Plätzen übereinander 

angeordnet 

seitlich zusammensteckbar für grössere Versuchsreihen, 

Abmessungen 210x89x50mm 

Kat.# Farbe/Beschreib. Pack.einheit Euro 

R046-B TwoRow Rack, blau 1 Rack 4,10 

R046-R TwoRow Rack, rot 1 Rack 4,10 

R046-W TwoRow Rack, weiss 1 Rack 4,10 



96-Well Reversable Rack mit einrastendem Stapeldeckel für 0,5ml & 1,5/2,0 ml Tubes 

Ein anwenderfreundliches Arbeits- und Lagerrack, beidseitig verwendbar für 96 x 

1,5/2,0mlTubes oder 96 x 0,5ml Tubes. Das Rack ist aus autoklavierbarem Polypropylen mit 

längeren Griffen, alphanumerischer Kodierung an den Steckplätzen und Schreibfeld auf dem 

Deckel. Verfügbar in naturfarbig oder neonfarbig gemischter Packung ( blau, grün, pink, gelb, 

orange ) 

Kat. # Beschreibung Farbe/ Menge Euro 

R041-1 96-Reversable Rack mit Deckel natur/ 1 Stück 8,70 

R041 96-Reversable Rack mit Deckel natur/ 5 Stück 42,90 

R041-A 96-Reversable Rack mit Deckel farbig/ 5 Stück 43,90 

R041-B 96-Reversable Rack mit Deckel blau/ 1 Stück 8,70 

R041-GR 96-Reversable Rack mit Deckel grün/ 1 Stück 8,70 

R041-Y 96-Reversable Rack mit Deckel gelb/ 1 Stück 8,70 

BestRacks, 64 und 96 Plätze 

Die doppelseitigen BestRacks sind aus stabilem Polypropylen gefertigt und können mit 0,5ml oder 

1,5/2,0ml Mikrozentrifugengefäßen wechselseitig bestückt werden. Die Racks sind autoklavierbar, 

die alphanumerische Kodierung und das Schriftfeld vereinfachen die Probenzuordnung. Für die 

Lagerung von Proben bis -80°C sind transparente Deckel lieferbar. Die Racks sind in zwei Versionen 

(64 oder 96 Plätze) in neon-Farben oder natur erhätlich. Abmessungen: 64 Rack: 13,1 x 13,4 x Höhe 

4,2 oder 5,0mm(2 Deckelpositionen) 96 Rack: 11,8 x 21,3 x Höhe 4,7 oder 4,9mm(2 

Deckelpositionen) 

Kat. # Anzahl Plätze Pack.einheit/ Farbe Euro 

R006 64 5 Racks neon mix 35,90 

R007 64 5 Racks natur 30,90 

R006-B 64 1 Rack neon blau 8,20 

R006-G 64 1 Rack neon grün 8,20 

R006-O 64 1 Rack neon oran. 8,20 

R006-P 64 1 Rack neon pink 8,20 

R006-Y 64 1 Rack neon gelb 8,20 

R008 Deckel für 64 Rack 1 Deckel natur 2,95 


R010 96 5 Racks natur 44,80 






R011 Deckel für 96 Rack 1 Deckel natur 3,70 

PCR-Rack, 96 Well mit anhängendem, abnehmbaren Deckel 



Ein autoklavierbares Polypropylen Lager- und Arbeitsrack für 0,2ml Tubes, 8 oder 12 Tube 

Streifen. Der anhängende Deckel ist abnehmbar, die Plätze der Tubes sind nach unten offen, 

um die PCR-Tubes im Eisbad während der Probenvorbereitung kühlen zu können, 

eingedrucktes alphanumerisches Identifizierungssystem; verfügbar in Packungseinheiten zu 5 

naturfarbig oder farbig gemischt (blau, grün, pink, gelb, orange). 


R040-N PCR-Rack,natur 5 25,95 

R040-A PCR-Rack,farbig 5 25,95 

R040-B PCR-Rack,blau 1 5,50 

R040-G PCR-Rack,grün 1 5,50 

R040-Y PCR-Rack,gelb 1 5,50 


Seite 1: Platz für 168 x 0,2ml Tubes (auch in Strip-Form) und 12 x 1,5ml Tubes 

Seite 2: Platz für 40 x 0,5ml und 12 x 1,5ml Tubes 

anhängender Deckel kann an beiden Seiten eingerastet werden 

Kat.# Beschreibung Farbe/ Menge Euro 

R044-1 96-Rev. Rack mit Deckel natur/ 1 Stück 12,80 

R044 96-Rev. Rack mit Deckel natur/ 5 Stück 54,80 

R044-A 96-Rev. Rack mit Deckel farbig/ 5 Stück 54,80 



Füllvolumen 55ml, V-förmiger Boden zur nahezu kompletten Entleerung aus klarem PVC. 




Die PCR Workstation bietet in sinnvoller Anordnung Platz für Reaktionsgefäße verschiedener 

Volumina. Das kombinierte Rack ist besonders für die Vor- oder Nachbereitung der PCR geeignet, 

da alle benötigten Gefäße platzsparend untergebracht werden können. Die Workstation besteht aus 

einem Basisrack mit folgenden Kapazitäten:24 x 1,5/2,0ml , 16 x 0,5ml Tubes und 32 x 0,2ml 

Tubes. Auf die Fläche der 0,2ml Tubes kann in die Führungsschiene das Satelittenrack ( Kat.# 

R028-S ) mit 8 x 12 Reihen für 0,2ml Tubes, oder 8 Streifen oder 1 Matrixplatte eingefügt werden. 

Die Workstation kann bis zu Temperaturen von -80°C eingesetzt werden. Die Plätze sind 

alphanummerisch gekennzeichnet. 


R028-B Neon blau 1 19,95 



R028-G Neon grün 1 19,95 

R028-O Neon orange 1 19,95 

R028-P Neon pink 1 19,95 

R028-Y Neon gelb 1 19,95 

R028-S Sat.Rack m.Deckel 5 racks neon mix 37,90 

VariStänder 

Ein universell einsetzbares doppelseitig verwendbares Rack aus Polypropylen mit alphanumerischer 

Kennzeichnung, autoklavierbar sowie gefrierfähig bis –80°C Lieferung inklusive Deckel. Maße: 168 x 82 x 

50mm ( LxBxH inklusive Deckel) Steckplätze: 1.Seite: 32 x 1,5/2,0ml + 8 x 0,5ml Tubes 2.Seite: 32 x 0,5ml * 

8 x1,5/2,0ml Tubes Farben: blau – grün –orange – pink - gelb 


R43 5 natur 49,90 

R43-A 5 farbig gemischt 59,90 

Latex- Laborhandschuhe 

weiche, komfortabel zu tragende Latexhandschuhe 

hohe Festigkeit und bestes Finger-Feingefühl 

Rollrand schützt zusätzlich vor ablaufenden Flüssigkeiten 

puderfrei, naturfarben, Länge: 24cm 

MLG-XS Latex puderfrei extra klein 59,00 

MLG-S Latex puderfrei klein 59,00 

MLG-M Latex puderfrei mittel 59,00 

MLG-L Latex puderfrei groß 59,00 

Nitril-Laborhandschuhe 

Unsere weichen violetten Nitrilhandschuhe sind sehr komfortabel zu tragen, wobei sie hohe Festigkeit und 

bestes Finger-Feingefühl gewähren. Die Nitrilhandschuhe sind resistent gegen Chemikalien wie Acrylamid und 

Ethidium Bromid, welches in vielen Labors zur Gelfärbung eingesetzt wird. Latexhandschuhe gewähren nicht 

die Sicherheit gegenüber Ethidium Bromid, da es in weniger als 1 Minute das Latex passiert. Der Rollrand 

schützt zusätzlich vor ablaufenden Flüssigkeiten. 

Die Handschuhe sind: - Puderfrei: keine Kontamination Ihrer Proben mit Puder 

Latexfrei: keine Manifestierung von Latexallergien 

Proteinfrei - Resistent gegen viele Chemikalien und Lösungsmittel 

Länge: 24cm 

Packungseinheit: 10 Boxen á 100 Handschuhe 

Kat. # Beschreibung Grösse Euro 

MNG-SS-S Nitrilhandschuhe SafeSkin klein 149,95 

MNG-SS-M Nitrilhandschuhe SafeSkin mittel 149,95 

MNG-SS-L Nitrilhandschuhe SafeSkin groß 149,95 

MNG-NT-S Nitrilhandschuhe Nitratex klein 118,00 

MNG-NT-M Nitrilhandschuhe Nitratex mittel 118,00 

MNG-NT-L Nitrilhandschuhe Nitratex groß 118,00 



Neu: Objektträgerkästen farbig, für 100 Objektträger 

Die Objektträgerkästen weisen im Boden eine Korkeinlage zum Schutz der Objektträger, im Deckel eine 

korrespondierende nummerierte Inventurkarte auf. Die stapelbare Polypropylenbox wird durch einen 

vernickelten Clipverschluss verschlossen. Abmessungen 222 x 171 x 33mm ( LxBxH ) 

Kat.# Farbe Pack.einheit Euro 

R100-B blau 1 5,95 

R100-G grün 1 5,95 

R100-Y gelb 1 5,95 

R100-R rot 1 5,95 

R100-W weiss 1 5,95 

R100-GRA grau 1 5,95 

R100-SCH schwarz 1 5,95 

Edelstahl Schrankgestelle für Objektträgerboxen Typ R100 

Passende Edelstahlgestelle für unser Objektträgerkästen 

Kat.# Anzahl der Boxen B x L x H in mm Euro 

OSG-5/2 5 hoch x 2 tief 187 x 466 x 189 190,00 








Einbettkassetten für die Histologie 

Unsere Einbettkassetten sind geeignet z.B zur Paraffin-Einbettung von Gewebeschnitten. Die 

Kassetten sind an den Seitenteilen gut beschriftbar und lösungsmittelbeständig. Wir bieten die 

Kassetten in sieben verschiedenen Farben an, weitere Farben auf Anfrage. 

Biopsiekassette Unterteil und Deckel fein gelocht 

Universalkassette Unterteil und Deckel geschlitzt 

Standardkassette ohne Deckel, grob gelocht 

Lieferung VE zu 500 Stück 

Kat.# Kassettentyp Farbe Euro 

HBK-W Biopsie weiß 39,95 

HBK-RA Biopsie rosa 39,95 

HBK-G Biopsie grün 39,95 

HBK-Y Biopsie gelb 39,95 



HBK-B Biopsie blau 39,95 

HBK-R Biopsie rot 39,95 

HBK-GRA Biopsie grau 39,95 

HUK-W Universal weiß 39,95 

HUK-RA Universal rosa 36,95 

HUK-G Universal grün 36,95 

HUK-Y Universal gelb 36,95 

HUK-B Universal blau 36,95 

HUK-R Universal rot 36,95 

HUK-GRA Universal grau 36,95 

HSK-W Standard weiß 26,95 

HSK-RA Standard rosa 26,95 

HSK-G Standard grün 26,95 

HSK-Y Standard gelb 26,95 

HSK-B Standard blau 26,95 

HSK-R Standard rot 26,95 

HSK-GRA Standard grau 26,95 

Stift für Lichtmikroskopie und Immunchemie, PAP PEN 

Der Stift erzeugt eine wasserabweisende Barriere und hält Proben/Antikörper 

etc. innerhalb der gekennzeichneten Fläche. Der Pap Pen ist einsatzfähig für 

PAP-, ABC-, BSA-, Immunfluoreszensmethoden sowie DNA-Techniken. Die 

Markierung ist wasser-, alkohol-, acetonfest und temperaturunempfindlich. 

Pap Pen stoppt Probenausbreitung reduziert die Probenmenge 

teilt Objektträger in individuelle Sektionen für Immunfärbungen 

Histologie, Zytologie, Virologie und Mikrobiologie 

Kat. # Beschreibung Euro 



Seitenanfang 


Kisker-Biotech Cryoproducts 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Labortiefkühltruhe Value Line 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Labortiefkühltruhe mit natürlicher Luftumwälzung und manueller Abtauung sowie 

Aussenmantelverflüssiger. Tauwasserablauf über eingebauten Bodenablauf. Bedienungspaneel im 

Frontgehäuse, Elekrtronikregler mit Digitalanzeige (LED). Mit Akustischer Alarmeinrichtung und 

potentialfreiem Kontakt. Außenverkleidung und Innenraum aus spezialgalvanisiertem, weiß 

beschichteten Stahlblech. Truhendeckel abschließbar mit umlaufender Mehrkammerdichtung und 

Federscharnieren zum stufenlosen Öffnen.Die Truhen werden mit Rollen (Ausnahme 74 Liter Truhe) 

geliefert. 

Kat. # Temp-ber. Brutto Inh. Außenmaß mm Innenmaß mm 

VL-7453 -30/-53 °C 74 Liter 555x635x885 385x385x470 

VL-29653 -30/-53 °C 296 Liter 1260x695x885 890x442x610 

VL-38353 -30/-53 °C 383 Liter 1560x695x885 1190x442x610 

VL-7483 -40/-83 °C 74 Liter 555x635x885 385x385x470 

VL-29683 -40/-83 °C 296 Liter 1260x695x885 890x442x610 

VL-38383 -40/-83 °C 383 Liter 1560x695x885 1190x442x610 

Kat. # Höhe b.geöff.Deckel Gewicht Volt/Hz/Ph Euro 

VL-7453 1480 mm 45 kg 220-240/50/1 1.890,00 

VL-29653 1500 mm 85 kg 220-240/50/1 2.190,00 

VL-38353 1545 mm 98 kg 220-240/50/1 2.690,00 

VL-7483 1480 mm 45 kg 220-240/50/1 3.290,00 

VL-29683 1500 mm 85 kg 220-240/50/1 4.695,00 

VL-38383 1545 mm 98 kg 220-240/50/1 4.995,00 

Labortiefkühlschrank ProfiMaster PMU03 

file:///F|/Kisker/Kisker/deutsch/cryo.htm (1 von 20) [08.12.2005 22:31:03] 

Microparticles


Labortiefkühlschrank mit natürlicher Luftumwälzung. Wartungsfreies 

Hochleistungskühlsystem – ab –55 °C bis –80°C - mit geräusch- und erschütterungsarmen 

Vollhermetikkompressoren, luftgekühlt. Bedinungspaneele mit mikroprozessorgesteuertem 

Temperaturregler mit Digitalanzeige (LED). Mit netzunabhängiger Alarmeinrichtung 

opt./akust. und potentialfreiem Kontakt zum Anschuß an eine hauseigene Alarmanlage. 

Temperaturschreiberanschluß 10mV/K zum Anschluß eines Temperaturschreibers. 

Außengehäuse mit Edelstahlabdeckung, Seitenteile weiß Stahlblech. Zwei Schranktüren 

(innen und außen), Außentür abschließbar, Türanschlag links. Innenraum aus Edelstahl 

ohne Einbauten, daher besonders hygienisch und reinigungsfreundlich. 

Kat. # Temperaturbereich °C BruttoInh. L Außenmaß mm Innenmaß Mm 

PMU0340 -10/-40 30 810x560x490 330x300x280 

PMU0350 -30/-50 30 810x560x490 330x300x280 

PMU0380 -70/-80 30 810x560x490 330x300x280 

Kat. # Tiefe * Gewicht Volt/Hz/Ph Euro 

PMU0340 1030 mm 61 230/50/1 2.750,00 

PMU0350 1030 mm 63 230/50/1 2.950,00 

PMU0380 1030 mm 82 230/50/1 3.790,00 

Ordnungssystemset ( Modifizierbar ) 

Kat.# PMUO3-OS Euro 252,50 Beinhaltet: 2 Edelstahlgestelle für 10 Boxen Eppi-Maxi, 20 Boxen Eppi-Maxi weiss,10 x 10 

Fächer für je 100 1,5/2,0ml Tubes 

Labortiefkühlschrank ProfiLine ECU 

Labortiefkühlschrank mit natürlicher Luftumwälzung. Wartungsfreies Hochleistungskühlsystem mit 

geräusch- und erschütterungsarmen Vollhermetik-Kältekompressoren, luftgekühlt. Elektronikregler 

mit Digitalanzeige (LED). Mit netzunabhängiger Alarmeinrichtung opt./akust. und potentialfreiem 

Kontakt zum Anschuß an eine hauseigene Alarmanlage. Außengehäuse Stahlblech mit 

Korrosionsschutz und qualitativ hochwertiger Acryl-Lackierung. Doppeldichtung und Zwischendeckel 

in der Truhe vermindern Kälteverlust beim Öffnen. Hauptschalter mit Sicherheitsschloß. Nutzraum 

aus beschichteten Spezialblech mit glatten Flächen, daher reinigungsfreundlich und optimal nutzbar. 

25mm Nutzraumdurchführung. Mit Rollen. Kältemittel: 1 Stufe R134a / R040a, 2. Stufe: R508b 

Kat.# Temp-ber. Brutto Inh. Außenmaß Innenmaß 

ECU 4085-5 -60/-85 °C 379 Liter 935x760x1980 597x483x1283 




Kat.# Tiefe b.geöff.Tür Gewicht Volt/Hz/Ph Euro 

ECU 4085-5 1590 mm 247 kg 220-240/50/1 7.095,00 

ECU 5085-5 1730 mm 268 kg 220-240/50/1 8.695,00 

ECU 6085-5 1840 mm 286 kg 220-240/50/1 9.195,00 

ECU 7085-5 2010 mm 316 kg 220-240/50/1 9.795,00 

Labortiefkühltruhe ProfiLine ECC 

file:///F|/Kisker/Kisker/deutsch/cryo.htm (2 von 20) [08.12.2005 22:31:03]


Labortiefkühltruhe mit natürlicher Luftumwälzung. Wartungsfreies Hochleistungskühlsystem mit 

geräusch- und erschütterungsarmen Vollhermetik-Kältekompressoren, luftgekühlt. Elekrtronikregler mit 

Digitalanzeige (LED). Mit netzunabhängiger Alarmeinrichtung opt./akust. und potentialfreiem Kontakt 

zum Anschuß an eine hauseigene Alarmanlage. Außengehäuse Stahlblech mit Korrosionsschutz und 

qualitativ hochwertiger Acryl-Lackierung. Stabiler Truhendeckel, doppelwandig und stark isoliert, 

ausbalanciert und leicht zu betätigen. Doppeldichtung und Zwischendeckel in der Truhe vermindern 

Kälteverlust beim Öffnen. Hauptschalter mit Sicherheitsschloß. Nutzraum aus beschichteten 

Spezialblech mit glatten Flächen, daher reinigungsfreundlich und optimal nutzbar. 25mm 

Nutzraumdurchführung. Mit Rollen, Kältemittel: 1 Stufe R134a / R040a, 2. Stufe: R508b 


ECC 1085-5 -60/-85 °C 90 Liter 737x686x1118 483x419x432 







ECC 1085-5 1750 mm 115 kg 220-240/50/1 5.990,00 

ECC 2085-5 1750 mm 193 kg 220-240/50/1 6.890,00 

ECC 3085-5 1750 mm 209 kg 220-240/50/1 7.590,00 

ECC 4085-5 1750 mm 242 kg 220-240/50/1 7.990,00 

ECC 5085-5 1750 mm 248 kg 220-240/50/1 8.590,00 

ECC 6085-5 1750 mm 274 kg 220-240/50/1 9.190,00 

Temperaturüberwachung und Protokollsystem ProfiTec 

Temperaturüberwachungs- und Protokollsystem für bis zu 4 Kühl- und/oder Tiefkühlgeräten sowie Wärme- und Brutschränke. 

Bedienerfeld mit digitaler Anzeigemöglichkeit von Datum, Uhrzeit, Temperatur der 4 Meßstellen, automatische Umschaltung von 

Sommer auf Winterzeit. Die Digitalanzeige dient gleichzeitig der Programmierung. Meßstellen können idividuell bezeichnet 

werden. Akustische Alarmeinrichtungen mit individuell einstellbaren Warnschwellen und Verzögerungszeiten. Potentialfreier 

Kontakt zum Anschluß an zentrale Leitstellen oder Telefonweiterschaltung. 3 Meldeeingänge für Türkontakt und/oder 

Anlagenstörung. Protokolliert bis zu 4 Meßstellen gleichzeitig über einen Zeitraum von bis zu 781 Tagen ( Minutenintervall). Die 

Meßwerte bleiben auch bei Netzausfall gespeichert. Ein optional erhältlicher Akku erlaubt Messungen und Speicherungen auch 

bei Netzausfall. Das Meßprotokoll kann direkt am Gerät ausgelesen werden oder über die RS232 Schnittstelle an einen PC oder 

seriellen Drucker übergeben werden. (Software siehe Sonderausstattung). Bis zu 79 ProfiTec´s lassen sich untereinander über 

die RS485 Schnittsttelle vernetzen. Die Meßprotokolle können dann mit dem PC einzeln abgerufen werden. Das Gehäuse 

besteht aus Kunststoff mit Klarsichtdeckel über dem Bedienungsfeld. Mit Schrauben und Dübelsatz für Wandbefestigung. 

Sonderausstattung Kat.Nr. Euro 

Temperaturbereich: +60/-110 °C Temperaturfühler mit 6 m Leitung ZPTEC-40-06Z 44,00 

Auflösung 0,5 °C Temperaturfühler mit 12 m Leitung ZPTEC-40-12Z 55,00 

Umgebungstemperatur: - bis +50 °C Temperaturfühler mit mehr als 12 m a.A. 

Außenmaße 160x114x160mm Akkusatz 12V/1,3Ah ZPTEC2-041 Z 71,00 

Leistungsaufnahme 5 W 

Verbindungskabel zw ProfiTec und. 

PC 

ZPTEC2-043 z 21,00 

Meßstellen 4 Verbindungskabel zw. ProfiTec und. ZPTEC2-045 z 21,00 

Meldeeingänge 3x230V mit Zeitverzögerung Drucker (serielle Schnitstelle)1,5m 

Speichervermögen 225.000 Meßwerte je Meßstelle Auswert und Protokoll-Software ZPTEC2-042 z 187,00 

Schnittstellen: RS232–serielle Druckerschnittst. Digitalwandler zur Vernetzung der ZPTEC2-044 z 189,00 

RS 485 PC Netzwer ProfiTec Einheit mit einem PC 



Kalibrierung Werksseitig, wartungsfrei Verbindungskabel beiVernetzung ZPTEC2-047 3,50 

Schutzart elektrisch IP 54 seriell/parallel für die Verwender 

Netzanschluß 230V/50Hz/1PH Seriell/Parallel-Wandler für ZPTEC2-047Z 99,50 

ProfiTec 4A Kat.Nr.: GPTEC4A Paralleldrucker beim Direktausdruck 

Preis: 1304,00EUR 

Thermostatschränke 

Thermostatschränke dienen der kontinuierlichen Temperierung bei unterschiedlichsten 

Anwendungen, z.b. Probenlagerung (4°C), Bestimmung von Enzymaktivitäten (25°C) oder 

Keimzahlen 37°C. Die Temperaturen werden von 4°C bis 40°C wartungsfrei und zuverlässig mit +/- 

0,5°C Temeraturkonstanz gesteuert. 

Technische Spezifikationen Thermostatschrank: 

-vollisolierter Schrank mit universeller Temperatur-Regeleinheit 

-2-fach Isolierglas im eloxierten Alurahmen (Modelle mit Glastür) 

- wassergeschützte Folienfront 

- Regelbereich 4 - 40°C in 1°C-Schritten 

- 2-LCD-Anzeigen 

- Soll- und Istwert 

- radiales Gebläse, Förderleistung 320m3/h 

Kat. # Inhalt in Liter Einschübe Tür – Version 

TS-ST-180 180 3 Standard 

TS-GT-180 180 3 Glas 


TS-GT-260 260 4 Glas 


TS-GT-360 360 5 Glas 


TS-GT-500 500 6 Glas 

Kat. # Gewicht Innenmaße LxBxH in mm Außenmaße LxBxH in mm Euro 

TS-ST-180 39,00 kg 513 x 433 x 702 

TS-GT-180 50,00 kg 513 x 433 x 702 

602 x 600 x 850 mit 

Arbeitsplatte 

602 x 600 x 855 mit 

Arbeitsplatte 

965,00 

1098,00 

TS-ST-260 49,00 kg 513 x 433 x 1074 602 x 600 x 1200 1255,00 

TS-GT-260 66,50 kg 513 x 433 x 1200 602 x 600 x 1200 1398,00 

TS-ST-360 64,50 kg 513 x 433 x 1418 602 x 600 x 1611 1445,00 

TS-GT-360 82,00 kg 513 x 433 x 1418 602 x 600 x 1611 1598,00 

TS-ST-500 79,5 kg 646 x 516 x 1338 755 x 715 x 1515 1745,00 

TS-GT-500 98,5 kg 646 x 516 x 1338 755 x 715 x 1515 1945,00 

Explosions-geschützte Laborkühlschränke 



Technische Spezifikation EX -Laborkühlschrank: 

- Regelbereich stufenlos 2-12°C 

- automatische Abtauung 

- abschließbare Tür 

- Inneraum aus weißem PS 

- Ex-Schutz: Innenraum frei von Zündquellen 


TEX-180 180 3 Standard 





TEX-180 37,00 kg 734 x 513 x 433 850 x 602 x 600 669,00 

TEX-260 46,50 kg 1047 x 513 x 433 1215 x 602 x 600 709,00 

TEX-360 62,00 kg 1418 x 513 x 433 1589 x 602 x 600 845,00 

TEX-500 77,00 kg 1338 x 646 x 516 1515 x 755 x 715 989,00 

Quali Etiketten, heiss – kalt 

einsetzbar in Kühlschränken, Cryobehältern ( Flüssigstickstoff bis - 196°C) und in kochendem 

Wasser aus chemisch inertem Polyvinyl, verwendbar auf jeder Art von Plastik, absolut eng 

anliegend, d.h. keine Behinderungen in Geräteeinsätzen, einfach zu handhaben durch Abziehen von 

vorgeschnittener Rolle mit 1000 weissen Etiketten oder auf Bögen für den Einsatz im Laserdruck. 

Kat. # Grösse für Tubes Pack.einheit Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 Stück 29,10 

HK-95-L 9,5mm D für Laserdruck 3840 Stück 119,00 

HK-12-L 13mm D für Laserdruck 3840 Stück 119,00 


Cryoboxen mit anhängendem Deckel für 50 und 100 x 1,5/2,0ml Tubes 

Die Cryoboxen haben eine 3-Punkt Deckelaufhängung, die sicheren Schluß gewährt. Die Cryoboxen 

weisen zudem eingedruckte Koordinaten im Boden und eine Netzunterteilung des Deckels auf. Die 

farbige Packungseinheit beinhaltet neon blau, grün, pink, gelb und orange. Die Cryobox ist resistent 

bis -80°C und der anhängende Deckel kann auch in gefrorenem Zustand einfach geöffnet werden. 

Abmessung: R030: 141 x 80 x 55mm ( B x T x H ) 


Kat. # Plätze / ml Farbe Pack.einheit Euro 

R030 50x1,5/2,0 Natur 5 24,90 

R030-A 50x1,5/2,0 Neon mix 5 25,90 

R031 100x1,5/2,0 Natur 5 33,25 

R031-A 100x1,5/2,0 Neon mix 5 34,25 

Quali-Box, 96-Fächer Cryobox aus Kartonmaterial für 1,5 und 2,0ml Tubes 



Probenlagerung entsprechend Ihren Versuchsreihen: im 96iger Format Erweiterte Fächer 

für einfacheren Zugriff auf Ihre Proben Weisse Cryobox aus tieftemperaturbeständigem 

wasserfestem Kartonmaterial Abmessungen: 174 x 122 x 51mm Raster 8 x 12 

Fächer/30mm hoch 

Kat.# Bezeichnung Grösse Euro 

R096 Quali-96iger Box 174x122x51mm 5,25 

Cryobox mit Teleskopdeckel, unsere neue 81 Platz Topversion 

Jedes Feld im Boden ist alphanumerisch kodiert; durch den glasklaren Deckel sind die Proben 

bestens zu erkennen. Die bis –196°C° gefrierfähigen und autoklavierbaren Lagerungsboxen aus 

Polypropylen sind in leuchtenden Farben (neon) blau, grün, orange, pink und gelb erhältlich. 

Abmessungen R14 & R15: 130 x 130 x 45mm ( B x T x H ) 

Kat. # Farbe Pack.einehit Euro 

R014 natur 5 17,65 

R015 neon mix 5 17,65 

R014-1 natur 1 3,70 


R015-GR neon grün 1 3,70 

R015-GE neon gelb 1 3,70 



Economy Cryobox Serie mit Teleskopdeckel 

Diese Box aus Tieftemperatur beständigem Polypropylen ist bis -150 C° gefrierfähig und 

autoklavierbar. Der Deckel ist durchsichtig zur einfachen Identifizierung der Proben. Zur 

Lagereinteilung stehen die 9x9 Platz Boxen in verschiedenen Farben zur Verfügung: 5 x neonfarbig, 

7 x standardfarbig. Die übrigen Boxen sind neonfarbig und werden auf Anfrage auch standardfarbig 

geliefert. 

9 x 9 Plätze 1-49Pck. 50+Pck 

Kat. # Farbe Euro Euro 

R034 Natur 2,80 2,70 

R034-NGE neon-gelb 2,90 2,80 

R034-NBL neon-blau 2,90 2,80 

R034-NGR neon-grün 2,90 2,80 

R034-NPI neon-pink 2,90 2,80 

R034-NOR neon-orange 2,90 2,80 

9 x 9 Plätze 1-49Pck. 50+Pck. 


R034-W weiss 3,35 3,25 

R034-GE gelb 3,35 3,25 

R034-BL blau 3,35 3,25 



R034-GR grün 3,35 3,25 

R034-RO rot 3,50 3,40 

R034-PI pink 3,50 3,40 

R034-SW schwarz 3,50 3,40 



R034-7 natur 3,10 2,95 

R034-7-NGE neon-gelb 3,60 3,50 

R034-7-NBL neon-blau 3,60 3,50 

R034-7-NGR neon-grün 3,60 3,50 

R034-7-NPI neon-pink 3,60 3,50 

R034-7-NOR neon-orange 3,60 3,50 



R034-8 natur 3,35 3,25 

R034-8-NGE gelb 3,85 3,75 

R034-8-NBL blau 3,85 3,75 

R034-8-NGR grün 3,85 3,75 

R034-8-NPI pink 3,80 3,70 

R034-8-NOR orange 3,80 3,70 

Box ohne Raster 1-49Pck. 50+Pck 


R034-B natur 1,95 1,85 

R034-B-NGE neon-gelb 1,95 1,85 

R034-B-NBL neon-blau 1,95 1,85 

R034-B-NGR neon-grün 1,95 1,85 

R034-B-NPI neon-pink 1,95 1,85 

R034-B-NOR neon-orange 1,95 1,85 

Rastereinsätze 30mm 1-49Pck. 50+Pck. 

Kat. # Röhrchen Euro Euro 

R034-R-13 13x13/8 2,40 2,30 

R034-R-12 12x12/8 1,65 1,60 

R034-R-10P 10x10/8 Plastik 1,20 1,15 

R034-R-9P 9x9/8 Plastik 1,35 1,30 

R034-R-8P 8x8/8 Plastik 1,35 1,30 



R034-R-7 7x7/8 1,35 1,30 

Cryoboxen aus Polypropylen 130 x130mm, variable Höhe 70 - 80mm 

Aus sehr stabilem Polypropylen mit transparentem Deckel, Neon - Farben, Lagerung bis - 80°C 

Kat.# für Tubes mm Ø Plätze Maße in mm Euro 

R039-natur 12,5 9 x 9 130x130x70-80 3,15 

R039-gelb 12,5 9 x 9 130x130x70-80 3,70 

R039-blau 12,5 9 x 9 130x130x70-80 3,70 

R039-grün 12,5 9 x 9 130x130x70-80 3,70 

R039-rot 12,5 9 x 9 130x130x70-80 3,70 

R039-orange 12,5 9 x 9 130x130x70-80 3,70 

R039-7-natur 16,5 7 x 7 130x130x70-80 3,40 

R039-7-gelb 16,5 7 x 7 130x130x70-80 3,90 

R039-7-blau 16,5 7 x 7 130x130x70-80 3,90 

R039-7-grün 16,5 7 x 7 130x130x70-80 3,90 

R039-7-rot 16,5 7 x 7 130x130x70-80 3,90 

R039-7-orange 16,5 7 x 7 130x130x70-80 3,90 

R039-1-natur ohne Raster 1 130x130x70-80 2,75 

R039-1-gelb ohne Raster 1 130x130x70-80 3,15 

R039-1-blau ohne Raster 1 130x130x70-80 3,15 

R039-1-grün ohne Raster 1 130x130x70-80 3,15 

R039-1-rot ohne Raster 1 130x130x128 3,15 

R039-1-orange ohne Raster 1 130x130x128 3,15 

Rastereinsätze 

Kat. # für Tubes mm Ø Rasterhöhe Euro 

R039-R-13 8 30 mm 2,35 

R039-R-12 9 30 mm 1,70 

R039-R-10P 12 30 mm 1,20 

R039-R-9P 13 30 mm 1,35 

R039-R-8P 14 30 mm 1,35 

R039-R-7 16,5 30 mm 1,35 

R039-R-6 19,5 30 mm 1,75 

R039-R-5 23,5 30 mm 1,20 

R039-R65-13 8 65 mm 2,50 

R039-R65-12 9 65 mm 1,90 

R039-R65-10 12 65 mm 1,90 

R039-R65-9 13 65 mm 1,90 

R039-R65-8 14 65 mm 1,90 



R039-R65-7 16,5 65 mm 1,95 

R039-R65-6 19,5 65 mm 1,90 

R039-R65-5 23,5 65 mm 1,90 

Cryoboxen aus Polypropylen für 0,2ml -- 0 ,5ml -- 15ml und 50ml Tubes 

Aus hoch stabilem Polypropylen mit transparentem Deckel, Neon - Farben, Lagerung bis - 190°C 

Kat.# Tubes Plätze Maße in mm Euro 

R035-natur PCR 0,2ml 12x12 130x130x32 5,90 

R035-gelb PCR 0,2ml 12x12 130x130x32 5,90 

R035-blau PCR 0,2ml 12x12 130x130x32 5,90 

R035-grün PCR 0,2ml 12x12 130x130x32 5,90 

R035-rot PCR 0,2ml 12x12 130x130x32 5,90 

R035-orange PCR 0,2ml 12x12 130x130x32 5,90 

R036-natur Mini 0,5ml 10x10 130x130x37 5,80 

R036-gelb Mini 0,5ml 10x10 130x130x37 5,80 

R036-blau Mini 0,5ml 10x10 130x130x37 5,80 

R036-grün Mini 0,5ml 10x10 130x130x37 5,80 

R036-rot Mini 0,5ml 10x10 130x130x37 5,80 

R036-orange Mini 0,5ml 10x10 130x130x37 5,80 

R037-natur Cell Box 15ml 25 130x130x128 8,25 

R037-gelb Cell Box 15ml 25 130x130x128 8,25 

R037-blau Cell Box 15ml 25 130x130x128 8,25 

R037-grün Cell Box 15ml 25 130x130x128 8,25 

R037-rot Cell Box 15ml 25 130x130x128 8,25 

R037-orange Cell Box 15ml 25 130x130x128 8,25 

R038-natur Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-gelb Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-blau Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-grün Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-rot Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-orange Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

Edelstahl Truhengestelle 



Lagerracks mit Handgriff für Gefriertruhen zum Einlagern von Kryoboxen bis 136 x 136 mm Grundfläche 

und 50/75/100mm Höhe. 

Kat. # Anzahl Boxen x Boxenhöhe Abmessung in mm B x T x H Euro 

TG-5 5 x 50mm 141 x 141 x 279 54,90 

TG-6 6X 50mm 141 x 141 x 334 59,90 

TG-7 7 x 50mm 141 x 141 x 389 56,90 

TG-8 8 x 50mm 141 x 141 x 444 57,90 

TG-9 9 x 50mm 141 x 141 x 499 57,90 

TG-10 10 x 50mm 141 x 141 x 554 59,90 

TG-11 11 x 50mm 141 x 141 x 609 58,90 

TG-12 12 x 50mm 141 x 141 x 664 58,90 

TG-13 13 x 50mm 141 x 141 x 719 69,90 

TG-14 14 x 50mm 141 x 141 x 774 75,80 

TG-75-4 4 x 75mm 141 x 141 x 325 52,00 

TG-75-6 6 x 75mm 141 x 141 x 485 53,00 

TG-75-7 7 x 75mm 141 x 141 x 565 53,00 

TG-75-8 8 x 75mm 141 x 141 x 645 58,00 

TG-75-9 9 x 75mm 141 x 141 x 725 71,00 

TG-75-10 10 x 75mm 141 x 141 x 805 81,00 

TG-100-3 3 x 100mm 141 x 141 x 320 69,00 

TG-100-4 4 x 100mm 141 x 141 x 425 70,00 

TG-100-5 5 x 100mm 141 x 141 x 530 71,00 

TG-100-6 6 x 100mm 141 x 141 x 635 76,00 

TG-100-7 7 x 100mm 141 x 141 x 740 81,00 

TG-130-3 3 x 130mm 141 x 141 x 410 79,70 

TG-130-4 4 x 130mm 141 x 141 x 545 82,75 

TG-130-5 5 x 130mm 141 x 141 x 680 90,55 

Sonderanfertigungen in anderen Abmessungen bzw. für Cryoboxen mit anderen Abmessungen fertigen wir auf Anfrage. 

Edelstahl Schrankgestelle 

Lagerracks mit Handgriff für Gefrierschränke zum Einlagern von Cryoboxen bis 136 x 136mm 

Grundfläche und 50/75/100mm Höhe 


SG-32-15 3 x 5 x 32mm 142 x 425 x 185 99,95 



SG-32-18 3 x 6 x 32mm 142 x 425 x 224 106,45 

SG-32-21 3 x 7 x 32mm 142 x 425 x 264 112,80 

SG-32-20 4 x 5 x 32mm 142 x 565 x 185 105,95 

SG-32-24 4 x 6 x 32mm 142 x 565 x 224 111,60 

SG-32-28 4 x 7 x 32mm 142 x 565 x 264 117,90 

SG-8 4 x 2 x 50mm 142 x 285 x 223 95,85 

SG-9 3 x 3 x 50mm 142 x 425 x 169 86,40 

SG-10 2 x 5 x 50mm 142 x 285 x 277 101,25 

SG-12 3 x 4 x 50mm 142 x 425 x 223 86,90 

SG-15 3 x 5 x 50mm 142 x 425 x 277 99,70 

SG-16 4 x 4 x 50mm 142 x 565 x 223 98,10 

SG-20 4 x 5 x 50mm 142 x 565 x 277 121,70 

SG-75-6 3 x 2 x 75mm 142 x 425 x 163 76,70 

SG-75-8 4 x 2 x 75mm 142 x 565 x 163 79,75 

SG-75-9 3 x 3 x 75mm 142 x 425 x 242 86,90 

SG-75-10 5 x 2 x 75mm 142 x 705 x 163 112,50 

SG-75-12 4 x 3 x 75mm 142 x 565 x 242 99,20 

SG-100-6 3 x 2 x 100mm 142 x 425 x 212 86,40 

SG-100-8 4 x 2 x 100mm 142 x 565 x 212 99,20 


Edelstahl-Schrankgestelle, horizontales Schubladensystem mit Auszugsstop 

-für Boxen 130 x 130 x 50mm LxBxH 

- opimale Übersicht 

Entnehmen der Gestelle entfällt, da Schubladensystem 


SGSA-2/2 2 x 2 140x301x123 119,95 

SGSA-2/3 2 x 3 140x301x184 123,80 

SGSA-2/4 2 x 4 140x301x245 132,50 

SGSA-2/5 2 x 5 140x301x306 142,50 

SGSA-2/6 2 x 6 140x301x367 151,50 

SGSA-3/2 3 x 2 140x434x123 127,50 

SGSA-3/3 3 x 3 140x434x184 131,50 

SGSA-3/4 3 x 4 140x434x245 136,50 

SGSA-3/5 3 x 5 140x434x306 144,50 

SGSA-3/6 3 x 6 140x434x367 154,50 

SGSA-4/2 4 x 2 140x567x123 129,50 

SGSA-4/3 4 x 3 140x567x184 132,50 

SGSA-4/4 4 x 4 140x567x245 137,50 



SGSA-4/5 4 x 5 140x567x306 146,50 

SGSA-4/6 4 x 6 140x567x367 156,50 

SGSA-5/2 5 x 2 140x700x123 143,50 

SGSA-5/3 5 x 3 140x700x184 146,50 

SGSA-5/4 5 x 4 140x700x245 149,90 

SGSA-5/5 5 x 5 140x700x306 165,50 

SGSA-5/6 6 x 6 140x700x367 175,50 


Edelstahltruhengestelle für Mikrotiterplatten im Format 86 x 128 x 18mm 

Vertikale rostfreie Racks für Truhen mit Klappgriff 

Kat. # Anzahl Boxen x Boxenhöhe B x T x H in mm Euro 

MTG-15 15 x 18mm 91 x 133 x 305 84,35 

MTG-16 16 x 18mm 91 x 133 x 325 86,90 

MTG-17 17 x 18mm 91 x 133 x 345 89,45 

MTG-18 18 x 18mm 91 x 133 x 365 92,00 

MTG-19 19 x 18mm 91 x 133 x 385 94,60 

MTG 20 20 x 18mm 91 x 133 x 405 97,15 

MTG-21 21 x 18mm 91 x 133 x 425 99,70 

MTG-22 22 x 18mm 91 x 133 x 445 102,25 

MTG-23 23 x 18mm 91 x 133 x 465 104,80 

MTG-24 24 x 18mm 91 x 133 x 485 107,40 

MTG-25 25 x 18mm 91 x 133 x 505 109,90 

MTG-26 26 x 18mm 91 x 133 x 525 112,50 

MTG-27 27 x 18mm 91 x 133 x 545 115,05 

MTG-28 28 x 18mm 91 x 133 x 565 118,10 

MTG-29 29 x 18mm 91 x 133 x 585 120,15 

MTG-30 30 x 18mm 91 x 133 x 605 122,70 

MTG-31 31 x 18mm 91 x 133 x 625 125,25 

MTG-32 32 x 18mm 91 x 133 x 645 127,80 

MTG-33 33 x 18mm 91 x 133 x 665 130,40 

MTG-34 34 x 18mm 91 x 133 x 685 132,95 

MTG-35 35 x 18mm 91 x 133 x 705 135,50 

MTG-36 36 x 18mm 91 x 133 x 725 138,55 

MTG-37 37 x 18mm 91 x 133 x 745 140,60 

MTG-38 38 x 18mm 91 x 133 x 765 143,15 



Edelstahl Schrankgestelle, horizontal, mit Auszugsstopp für Mikrotiterplatten 86 x 128 x 18mm 

Horizontal stainless steel racks with pullout-stop for upright freezers 


Kat. # Anzahl d.Platten B x T x H in mm Euro 

MSG-4/8 4 x 8 135x379x209 141,65 

MSG-4/9 4 x 9 135x379x235 150,85 

MSG-4/10 4 x 10 135x379x261 159,50 

MSG-4/11 4 x 11 135x379x287 167,20 

MSG-4/12 4 x 12 135x379x313 175,90 

MSG-4/13 4 x 13 135x379x339 183,55 

MSG-4/14 4 x 14 135x379x365 191,75 

MSG-4/15 4 x 15 135x379x391 200,40 

MSG-4/16 4 x 16 135x379x417 208,10 

MSG-5/8 5 x 8 135x465x209 147,00 

MSG-5/9 5 x 9 135x465x235 156,45 

MSG-5/10 5 x 10 135x465x261 164,50 

MSG-5/11 5 x 11 135x465x287 172,50 

MSG-5/12 5 x 12 135x465x313 180,90 

MSG-5/13 5 x 13 135x465x339 189,10 

MSG-5/14 5 x 14 135x465x365 197,30 

MSG-5/15 5 x 15 135x465x391 205,50 

MSG-5/16 5 x 16 135x465x417 213,70 

MSG-6/8 6 x 8 135x551x209 151,85 

MSG-6/9 6 x 9 135x551x235 161,05 

MSG-6/10 6 x 10 135x551x261 169,25 

MSG-6/11 6 x 11 135x551x287 177,40 

MSG-6/12 6 x 12 135x551x313 185,60 

MSG- 6/13 6 x 13 135x551x339 193,80 

MSG- 6/14 6 x 14 135x551x365 201,95 

MSG- 6/15 6 x 15 135x551x391 210,15 

MSG- 6/16 6 x 16 135x551x417 218,30 

Edelstahl Schrankgestelle für Objektträgerkästen 222 x 171 x 33mm LxBxH, Typ R100 

Kat. # Anzahl Kästen Höhe x Tiefe B x L x H in mm Euro 



OSG-5/2 5 x 2 187 x 466 x 189 190,00 

OSG-6/2 6 x 2 187 x 466 x 227 218,00 

OSG-7/2 7 x 2 187 x 466 x 264 248,00 

OSG-8/2 8 x 2 187 x 466 x 302 280,00 

OSG-5/3 5 x 3 187 x 688 x 189 209,00 

OSG-6/3 6 x 3 187 x 688 x 227 245,00 

OSG-7/3 7 x 3 187 x 688 x 264 280,00 

OSG-8/3 8 x 3 187 x 688 x 302 315,00 

EPPI-Box A : Cryoboxen Einfrier- und Lagerboxen 

EPPI-Box A sind Behälter für die Aufbewahrung von Probenmaterial. Sie 

bestehen aus tiefkältebeständigem, wasserfest bezogenem Kartonmaterial. 

Desweiteren sind sie auch als Ausführung mit zusätzlicher wasserdichter 

Kunststoffbeschichtung erhältlich. Alle Boxen werden mit eingelegtem 

Rastereinsatz und Deckel geliefert. Wir bieten Ihnen mit dieser Produktpalette 

eine Vielfalt von Möglichkeiten zur Lagerung von Proben in unterschiedlichen 

Quantitäten und Volumina an. Folgende Farben und Ausführungen stehen zu 

Verfügung: WE = weiss; GE = gelb; BL = blau; GR = grün; RO = rot -1 = 

standard -2 = spezial beschichtet 



16 x 16 Fächer, 

136x136x25mm 


136x136x32mm 


136x136x50mm 

10 x 10 Fächer, 140x140x50mm 

Kat. # Euro Kat. # Euro Kat.# Euro Kat. # Euro 

301115WE-1 5,50 301016WE-1 4,30 301100WE-1 3,20 301014WE-1 4,20 

301115WE-2 6,55 301016WE-2 5,35 301100WE-2 4,40 301014WE-2 5,40 

301115GE-1 6,00 301016GE-1 5,40 301100GE-1 5,05 301014GE-1 5,20 

301115GE-2 7,05 301016GE-2 6,70 301100GE-2 6,60 301014GE-2 6,75 

301115BL-1 6,00 301016BL-1 5,40 301100BL-1 5,05 301014BL-1 5,20 

301115BL-2 7,05 301016BL-2 6,70 301100BL-2 6,60 301014BL-2 6,75 

301115GR-1 6,00 301016GR-1 5,40 301100GR-1 5,05 301014GR-1 5,20 

301115GR-2 7,05 301016GR-2 6,70 301100GR-2 6,60 301014GR-2 6,75 

301115RO-1 6,00 301016RO-1 5,40 301100RO-1 5,05 301014RO-1 5,20 

301115RO-2 7,05 301016RO-2 6,70 301100RO-2 6,60 301014RO-2 6,75 

Eppi Box A: Cryoboxen lange Version 

Gleiche Spezifikation wie die vorher beschriebenen Lagerboxen, jedoch in langer Form 

und doppelter Lagerungskapazität 


EPPI-PCR A 0,2 

"lang" 

EPPI-Mini A 0,5 "lang" 

file:///F|/Kisker/Kisker/deutsch/cryo.htm (14 von 20) [08.12.2005 22:31:03] 

EPPI-Basic A 1,5 

"lang" 

EPPI-Maxi A 1,5 

"lang"


16 x 32 Fächer 

136x268x25mm 


136x268x32mm 


136x268x50mm 


140x276x50mm 

Kat. # Euro Kat. # Euro Kat. # Euro Cat. # Euro 

301115LWE-1 11,50 301016LWE-1 10,40 301100LWE-1 9,70 301014LWE-1 11,00 

301115LWE-2 13,70 301016LWE-2 11,50 301100LWE-2 10,80 301014LWE-2 11,95 

301115LGE-1 12,60 301016LGE-1 11,65 301100LGE-1 10,80 301014LGE-1 11,75 

301115LGE-2 14,65 301016LGE-2 13,00 301100LGE-2 11,80 301014LGE-2 12,75 

301115LBL-1 12,60 301016LBL-1 11,65 301100LBL-1 10,80 301014LBL-1 11,75 

301115LBL-2 14,65 301016LBL-2 13,00 301100LBL-2 11,80 301014LGL-2 12,75 

301115LGR-1 12,60 301016LGR-1 11,65 301100LGR-1 10,80 301014LGR-1 11,75 

301115LGR-2 14,65 301016LGR-2 13,00 301100LGR-2 11,80 301014LGR-2 12,75 

301115LRO-1 12,60 301016LRO-1 11,65 301100LRO-1 10,80 301014LRO-1 11,75 

301115LRO-2 14,65 301016LRO-2 13,00 301100LRO-2 11,80 301014LRO-2 12,75 

CellBox Zellkultur; Einfrier- und Lagerkassetten für 15 ml und 50 ml Röhrchen 

CellBox ist ein Behälter für die Lagerung von Proben in Röhrchen. Die Boxen sind 

aus tiefkältebeständigem wasserfest bezogenem (-1= standard) Kartonmaterial 

oder mit zusätzlicher wasserdichter Kunststoffbeschichtung (-2 = spezial). Alle 

Boxen werden mit Deckel und eingelegtem Rastereinsatz geliefert. Die Behälter 

sind geeignet für alle Röhrchen bis zu 22mm Ø (für 15ml) oder 34mm Ø (für 50 

ml) mit einer Gesamtlänge von 125mm. Die Maße sind Außenmaße inklusive 

Deckel. Folgende Farben und Ausführungen stehen zur Verfügung: WE = weiss; 

GE = gelb; BL = blau; GR = grün; RO = rot -1 = standard -2 = spezial beschichtet 



5x5 Fächer, 

122x122x128mm 

6x6 Fächer, 

148x148x128mm 

3x3 Fäcker, 

122x122x128mm 

4x4 Fächer, 148x148x128mm 

Kat. # Euro Kat. # Euro Kat. # Euro Kat. # Euro 

301017WE-1 8,90 301019WE-1 9,35 301018WE-1 8,50 301020WE-1 9,00 

301017WE-2 10,20 301019WE-2 10,75 301018WE-2 9,80 301020WE-2 10,35 

101017GE-1 10,45 301019GE-1 11,10 301018GE-1 10,05 301020GE-1 10,60 

301017GE-2 11,80 301019GE-2 12,50 301018GE-2 11,35 301020GE-2 12,00 

301017BL-1 10,45 301019BL-1 11,10 301018BL-1 10,05 301020BL-1 10,60 

301017BL2 11,80 301019BL-2 12,50 301018BL-2 11,35 301020BL-2 12,00 

301017GR-1 10,45 301019GR-1 11,10 301018GR-1 10,05 301020GR-1 10,60 

301017GR-2 11,80 301019GR-2 12,50 301018GR-2 11,35 301020GR-2 12,00 

301017RO-1 10,45 301019RO-1 11,10 301018RO-1 10,05 301020RO-1 10,60 

301017RO-2 11,80 301019RO-2 12,50 301018RO-2 11,35 301020RO-2 12,00 

CellBox Zellkultur; Einfrier- und Lagerkassetten für 15 ml und 50 ml Röhrchen, lange Version 



Gleiche Spezifikation wie die vorher beschriebenen, jedoch in langer Form und doppelter 

Kapazität 



5x10 Fächer, 

122x240x128mm 

6x12 Fächer, 

148x291x128mm 

3x6 Fächer, 

122x240x128mm 

4x8 places, 

148x291x128mm 


301140WE-1 12,50 301142WE-1 13,00 301141WE-1 11,95 301143WE-1 12,45 

301140WE-2 14,35 301142WE-2 14,95 301141WE-2 13,75 301143WE-2 14,30 

301140GE-1 14,80 301142GE-1 15,35 301141GE-1 14,10 301143GE-1 14,70 

301140GE-2 15,80 301142GE-2 16,00 301141GE-2 15,45 301143GE-2 15,55 

301140BL-1 14,80 301142BL-1 15,35 301141BL-1 14,10 301143BL-1 14,70 

301140BL-2 15,80 301142BL-2 16,00 301141BL-2 15,45 301143BL-2 15,55 

301140GR-1 14,80 301142GR-1 15,35 301141GR-1 14,10 301143GR-1 14,70 

301140GR-2 15,80 301142GR-2 16,00 301141GR-2 15,45 301143GR-2 15,55 

301140RO-1 14,80 301142RO-1 15,35 301141RO-1 14,10 301143RO-1 14,70 

301140RO-2 15,80 301142RO-2 16,00 301141RO-2 15,45 301143RO-2 15,55 

Cryoboxen aus Kartonmaterial 

Weisse Cryoboxen für die Lagerung von Proben, 136 x 136 mm Grundfläche, 

32/50/75/100/130mm Höhe, das Material ist aus tieftemperaturbetändigem wasserfestem 

Kartonmaterial mit zusätzlich wasserdichter Kunststoffbeschichtung. Die Boxen sind 

erhältlich in verschiedenen Höhen und können mit den unten aufgeführten Rastern benutzt 

werden. Durch diese Vielfältigkeit können Röhrchen von 8 - 31 mm Ø gelagert werden. 

Die Raster sind 30mm hoch, können aber auch auf Anfrage in anderen Höhen für die 

niedrigeren bzw. höheren Boxen in 25mm, 40mm und 65mm geliefert werden. 


SB-32 Box 32mm 2,45 

SB-50 Box 50mm 1,75 

SB-75 Box 75mm 2,70 

SB-100 Box 100mm 5,05 

SB-130 Box 130mm 6,90 

Raster/Röhrchen Ø 

SB-R-4 Raster 4 x 4/31mm 1,80 

SB-R-5 Raster 5 x 5 / 21mm 1,50 

SB-R-6 Raster 6 x 6 / 17mm 1,50 

SB-R-7 Raster 7 x 7 / 16mm 1,35 

SB-R-8 Raster 8 x 8 / 14mm 1,25 

SB-R-9 Raster 9 x 9 / 13mm 1,20 



SB-R-10 Raster 10 x 10 / 12mm 1,20 

SB-R-12 Raster 12 x 12 / 10mm 1,50 

SB-R-13 Raster 13 x 13/9mm 2,45 

SB-R-14 Raster 14 x 14 / 8mm 2,50 

Weitere Boxen mit andern Formaten, z.B. 133 x 133mm Grundfläche sind auf Anfrage erhältlich. 

Cryoröhrchen, steril, Polypropylen, Innengewinde mit Silikondichtung 

Röhrchen zur Lagerung biologischer Proben bei Temperaturen bis -190°C, 

DNase-, RNase- und Pyrogenfrei. Silikondichtung zwischen 

Schraubverschluss und Röhrchen garantiert Dichtigkeit bei allen 

Temperaturen. Röhrchen wird mit 1-1/4 Drehung verschlossen. Verschluss 

und Röhrchen sind aus PP mit gleichem Ausdehnungskoeffizienten. Die 

graduierten Röhrchen haben ein weißes Beschriftungsfeld und können mit 

farbigen Einsätzen (siehe unten) kodiert werden. Freistehende 

Cryoröhrchen können in der "Workstation" zur einfacheren Handhabung 

eingerastet werden. Die Cryoröhrchen sind gamma-sterilisiert und werden 

in wiederverschließbaren Sicherheitsbeuteln zu 100 Stück geliefert. 

Kat. # Volumen Form Abmessung in mm Euro 

CV11-1 1,2ml Freistehend 12,5 x 43 22,90 


CV11-3 2,0ml Rundboden 12,5 x 48 22,90 


CV11-4A 4,0ml Freistehend 12,5 x 72 24,90 


Cryoröhrchen, steril, Polypropylen, Aussengewinde mit Silikondichtung 

100 Tubes 

Die lange Form des Verschlusses garantiert eine einfache einhändige Handhabung. Der Verschluss schließ durch 1-1/4 

Drehung. Die Röhrchen werden in wiederverschließbaren Sicherheitsbeuteln zu 100 Stück geliefert. 

100 Tub. 


CV10-1A 1,2ml freistehend 12,5 x 43 26,90 






Farbige Schraubverschlusseinsätze, Polypropylen für CV-10 und CV-11 Linie 

Farbige Verschlusseinsätze passend in die Deckel der Cryoröhrchen erleichtern die 

Identifizierung; lieferbar zu 100 Stück. Farben: weiß, blau, rot, grün, gelb 

Kat. # Farbe Euro/500St. 

CVI-M gemischt 16,75 

Value Line Cryoröhrchen, steril, Polypropylen, Aussengewinde, freistehend 



Cryoröhrchen mit Sicherheitsschraubdeckel aus hochwertigem Polypropylen. 

Silikon- und Weichmacher frei, daher ohne Kontaminationsrisiko. 

Dichtschließender Schraubdeckel mit Außengewinde und Safe-Sealing Lip. 

Einfache Handhabung durch Sternboden. DNase-, RNase-, Endotoxin- und 

Cadmium frei. 

Kat. # Volumen VE Euro. 

CV-VL-1 1,2ml 10 x 100 149,00 

CV-VL-2 2,0ml 10 x 100 149,00 

CV-VL-4 4,0ml 5 x 100 84,00 

CV-VL-5 5,0ml 5 x 100 89,00 

Farbige Schraubverschlusseinsätze, für CV-VL Linie 

Farbige Verschlusseinsätze passend in die Deckel der Cryoröhrchen erleichtern die Identifizierung; 

sie sind beschriftbar uns lassen sich leicht in den Deckel eindrücken 

Verpackungseinheit zu 5x100 Stück. 


CV-VL-W weiß 8,90 

CV-VL-G gelb 8,90 

CV-VL-B blau 8,90 

CV-VL-GR grün 8,90 

CV-VL-R rot 8,90 

CV-VL-V violett 8,90 

CV-VL-GA grau 8,90 

CV-VL-O orange 8,90 

CV-VL-P rosa 8,90 

Halterung für Cryoröhrchen 

Halterungen aus Aluminium, Kapazität von bis zu 5 x 1,2 oder 2,0 ml Cryoröhrchen; 

geeignet zur Tieftemperaturlagerung in Flüssigstickstoff. 

Kat. # Länge Pack.einheit Euro 

CV-H 290mm 12 Stück 10,95 

Cryoröhrchen Workstation 

Diese autoklavierbaren Racks für 50 Cryoröhrchen erlauben auf Grund des Einrastsystems das 

einhändige Öffnen und Verschließen der freistehenden Cryoröhrchen. Gummifüßchen gewährleisten 

einen sicheren Stand, das alphanumerisches Codierungssystem erleichtert die Identifizierung der 

Probenröhrchen. 

Kat. # Pack.einheit Farbe Euro 

CV-WB 1 blau 14,40 

LAB DEWAR: Systeme für Lagerung, Transport und Entnahme von Flüssigstickstoff 



Chart ( vormals MVE ) Cryo-Dewars als praktische und kostengünstige Lösung zur Lagerung und Entnahme von 

Flüssigstickstoff. Durch hochwirksame Isolierung, eingebunden in eine Aluminiumkonstruktion, gehören sie zu den leichtesten 

und effizientesten verfügbaren Cryo-Behältern. Heben und Ausgießen werden durch entsprechende Form und Griffteile 

vereinfacht. Die Behälter können mit Ausgußtüllen, Druckentnahmevorrichtungen oder Kellen befüllt und entleert werden 

A Easy maintanance lid design B High strength neck tube reduces liquid nitrogen loss C Advanced Chemical Vacuum 

Retention System- designed for superior vacuum performance over the life of the product. 5 years vacuum warrenty D 

Superior strength, lightwise aluminium construction E Insulation - MVE`s advanced insulation system provides 

maximum thermal performance 

Kat. Nr., Modell LAB 4 LAB 5 LAB 10 LAB 20 LAB30 LAB 50 

Preis in Euro 395,00 425,00 479,00 658,00 769,00 1.010,00 

Lagerungskap. In Liter Flüßig-N 4 5 10 21 32 50 

Verdampfungsrate(Liter/Tag) 0,19 0,15 0,18 0,18 0,22 0,49 

Statische Haltezeit in Tagen 

Abmessungen 

18 33,3 55,6 116,7 128 111 

Halsöffnung in mm 35,5 56 56 51 64 64 

Arbeitshöhe in mm 198 266 343 348 387 559 

Gesamthöhe in mm 426 462 546 627 611 779 

Außendurchmesser in mm 185 222 260 368 432 432 

Innendurchmesser in mm 139 165 210 289 356 356 

Leergewicht / Füllgewicht in kg 2,7 / 6 4/8 6/14 9/26 12/38 15 / 56 

Chart ( vormals MVE ) Aluminium Lagerbehälter, SC und XC Serie -192°C Flüssigstickstoff 

Tieftemperaturlagerungsbehälter 

Diese Serie ist für Anwender gedacht, die nur geringe Kapazitäten für Langzeitlagerung benötigen und dabei Wert auf geringen 

Stickstoffverbrauch legen. Da die Anforderungen an die Lagerung von biologischen Proben erheblich variieren können, sind 

innerhalb dieser Serie Behälter mit unterschiedlichen Kapazitäten und Haltezeiten verfügbar. Die Behälter der Aluminiumserie 

sind leicht und widerstandsfähig und seit Jahren durch innovatives Design sowie höchste Leistung und Qualität führend. Alle 

Behälter werden inklusive 6 Kanister zur Aufnahme der Pailetten bzw. Haltern für Cryoröhrchen geliefert. Individuelle Kanister 

sind je nach Modell verfügbar. Alle Modelle haben 5 Jahre Vacuum-Garantie. 

Kat. Nr., Modell SC 3/3 SC 11/7 SC 16/11 SC20/20 

Preis in Euro 689,00 735,00 1.129,00 837,00 

Nominelle Lag.Kapazität 

0,5cc Pailletten(10/Halter) -- 540 -- 540 

0,5cc Pail.(Menge/Ebene) 732 732 1098 780 

Anzahl 1,2 & 2,0ml Röhr. -- 150 -- 150 

Kapazität Flüssig-N (Liter) 3,6 11,0 16,4 20,5 

Verdampf..-rate (L/Tag) 0,12 0,15 0,14 0,09 

Arbeitshaltezeit in Tagen 19 46 74 126 

Abmessungen 

Halsöffnung in mm 51 51 51 51 

Gesamthöhe in mm 406 549 444 652 

Aussendurchmesser mm 222 260 438 368 

Kanisterhöhe in mm 127 279 127 279 

Kanisterdurchmesser mm 38 38 38 38 

Leergwicht /Füllgewicht in kg 3,6 / 6,5 7,7 / 16,6 6,4 / 19,6 11,8 / 28,3 

Kat. Nr., Modell SC36/32 XC 22/5 XC 34/18 XC 47/11-6 

Preis in Euro 999,00 898,00 979,00 1.298,00 




0,5cc Pailletten(10/Halter) 540 2.400 2.100 4.500 

0,5cc Pail.(Menge/Ebene) 780 3.666 3.000 6.216 

Anzahl 1,2 & 2,0ml Röhr. 150 810 630 1.320 




Abmessungen 






Leergwicht /Füllgewicht in kg 15,4 / 42,4 11,8 / 30 15,4 / 43,5 16,4 / 54,6 

Seitenanfang 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



Chest freezer Value Line 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Laboratory chest freezer with condenser in outer jacket.Natural air circulaition and manual thawing. 

Condensate drain integrated in base. Operating panel in front cover with electronic control and digital 

display (LED). With acoustic alarm and No-Volt remote alarm contact. External casing and interior 

made of specially galvanized steel panelling with white coating. Lockable lid with special seal all 

round and spring-loaded hinges to allow opening at any angle. Inner covering included (only -83°C). 

With wheels (exept 74 liter chest), supplied separately. 



& DNA 

Measurement 



Cat. # Temperature range Brutto content outer dim. mm innerdim. mm 

VL-7453 -30/-53 °C 74 Liter 555x635x885 385x385x470 

VL-29653 -30/-53 °C 296 Liter 1260x695x885 890x442x610 

VL-38353 -30/-53 °C 383 Liter 1560x695x885 1190x442x610 

VL-7483 -40/-83 °C 74 Liter 555x635x885 385x385x470 

VL-29683 -40/-83 °C 296 Liter 1260x695x885 890x442x610 

VL-38383 -40/-83 °C 383 Liter 1560x695x885 1190x442x610 

Cat. # hight at open lid weight Volt/Hz/Ph Euro 

VL-7453 1480 mm 45 kg 220-240/50/1 1.890,00 

VL-29653 1500 mm 85 kg 220-240/50/1 2.190,00 

VL-38353 1545 mm 98 kg 220-240/50/1 2.690,00 

VL-7483 1480 mm 45 kg 220-240/50/1 3.290,00 

VL-29683 1500 mm 85 kg 220-240/50/1 4.695,00 

VL-38383 1545 mm 98 kg 220-240/50/1 4.995,00 

Table top freezer ProfiMaster PMU03 

file:///F|/Kisker/Kisker/cryo.htm (1 von 19) [08.12.2005 22:31:08] 

Microparticles


Laboratory upright freezer with natural air circulation.Heavy-duty refrigeration system, 

maintenance free, between –55 °C to –80°C cascade connection, with industrial grade 

hermetically sealed refrigeration compressors and reliable cascade refrigeration ton 

minimize noise and vibration, aircooled. Operating panel with microprocessor driven 

temperature controler and digital display (LED). Includes optical and acoustical alarm device 

with independent circuit and floating contact for connection to an alarm system on the 

premises. 10mV/K terminal for connection to our temperature recorder. Exterior case with 

stainless steel covering, lateral parts white, sheet steel. Two doors (inside and outside), 

front door lockable. Door stop on left. Interior made of stainless steel without mounted 

equipment, making it especially hygienic and easy to clean. 

Cat. # Temperature range °C Brutto content L outer dim. mm inner dim. mm 

PMU0340 -10/-40 30L 810x560x490 330x300x280 

PMU0350 -30/-50 30L 810x560x490 330x300x280 

PMU0380 -70/-80 30L 810x560x490 330x300x280 

Cat. # depth weight kg Volt/Hz/Ph Euro 

PMU0340 1030 mm 61 230/50/1 2.750,00 

PMU0350 1030 mm 63 230/50/1 2.950,00 

PMU0380 1030 mm 82 230/50/1 3.790,00 

Storage System 

Kat.# PMUO3-OS Euro 252,50 consisting of: 2 stainless steel racks for 10 Boxes each, Eppi-Maxi 20 Boxes Eppi-Maxi white, 10 

x 10 divider for 100 x 1,5/2,0ml Tubes each 

Upright freezer ProfiLine ECU 

Laboratory upright freezer with natural air circulation. Maintenance free high power cooloing system 

with nearly noice and vibration free cooling compressors, aircooled. Electronic control wit digital 

display (LED). Includes optical and acoustical alarm device with independent circuit and floating 

contact for connection to an alarm system on the premises. Exterior case with stainless steel 

covering and corrosion protection. Double sealing and intermediate lid avoid loss of cold while 

opening.Interior made from special coated steel with smoth surface for easy cleaning. With Rolls. 

Refrigerant: 1 Stepp R134a / R040a, 2. Stepp: R508b 

Cat.# Temperature range Brutto content outer dim. mm inner dim. 





Cat.# depth at opened door weight Volt/Hz/Ph Euro 

ECU 4085-5 1590 mm 247 kg 220-240/50/1 7.095,00 

ECU 5085-5 1730 mm 268 kg 220-240/50/1 8.695,00 

ECU 6085-5 1840 mm 286 kg 220-240/50/1 9.195,00 

ECU 7085-5 2010 mm 316 kg 220-240/50/1 9.795,00 

Chest freezer ProfiLine ECC 

file:///F|/Kisker/Kisker/cryo.htm (2 von 19) [08.12.2005 22:31:08]


Laboratory chest freezer with natural air circulation. Maintenance free high power cooloing system with 

nearly noice and vibration free cooling compressors, aircooled. Electronic control wit digital display 

(LED). Includes optical and acoustical alarm device with independent circuit and floating contact for 

connection to an alarm system on the premises. Exterior case with stainless steel covering and 

corrosion protection. Double sealing and intermediate lid avoid loss of cold while opening.Interior made 

from special coated steel with smoth surface for easy cleaning. With Rolls. Refrigerant: 1 Stepp R134a / 

R040a, 2. Stepp: R508b 









ECC 1085-5 1750 mm 115 kg 220-240/50/1 5.990,00 

ECC 2085-5 1750 mm 193 kg 220-240/50/1 6.890,00 

ECC 3085-5 1750 mm 209 kg 220-240/50/1 7.590,00 

ECC 4085-5 1750 mm 242 kg 220-240/50/1 7.990,00 

ECC 5085-5 1750 mm 248 kg 220-240/50/1 8.590,00 

ECC 6085-5 1750 mm 274 kg 220-240/50/1 9.190,00 


Temperaturüberwachungs- und Protokollsystem für bis zu 4 Kühl- und/oder Tiefkühlgeräten sowie Wärme- und Brutschränke. 

Bedienerfeld mit digitaler Anzeigemöglichkeit von Datum, Uhrzeit, Temperatur der 4 Meßstellen, automatische Umschaltung von 

Sommer auf Winterzeit. Die Digitalanzeige dient gleichzeitig der Programmierung. Meßstellen können idividuell bezeichnet 

werden. Akustische Alarmeinrichtungen mit individuell einstellbaren Warnschwellen und Verzögerungszeiten. Potentialfreier 

Kontakt zum Anschluß an zentrale Leitstellen oder Telefonweiterschaltung. 3 Meldeeingänge für Türkontakt und/oder 

Anlagenstörung. Protokolliert bis zu 4 Meßstellen gleichzeitig über einen Zeitraum von bis zu 781 Tagen ( Minutenintervall). Die 

Meßwerte bleiben auch bei Netzausfall gespeichert. Ein optional erhältlicher Akku erlaubt Messungen und Speicherungen auch 

bei Netzausfall. Das Meßprotokoll kann direkt am Gerät ausgelesen werden oder über die RS232 Schnittstelle an einen PC oder 

seriellen Drucker übergeben werden. (Software siehe Sonderausstattung). Bis zu 79 ProfiTec´s lassen sich untereinander über 

die RS485 Schnittsttelle vernetzen. Die Meßprotokolle können dann mit dem PC einzeln abgerufen werden. Das Gehäuse 

besteht aus Kunststoff mit Klarsichtdeckel über dem Bedienungsfeld. Mit Schrauben und Dübelsatz für Wandbefestigung. 



Auflösung 0,5 °C Temperaturfühler mit 12 m Leitung ZPTEC-40-12Z 55,00 

Umgebungstemperatur: - bis +50 °C Temperaturfühler mit mehr als 12 m a.A. 



Verbindungskabel zw ProfiTec und. 

PC 

ZPTEC2-043 z 21,00 

Meßstellen 4 Verbindungskabel zw. ProfiTec und. ZPTEC2-045 z 21,00 

Meldeeingänge 3x230V mit Zeitverzögerung Drucker (serielle Schnitstelle)1,5m 

Speichervermögen 225.000 Meßwerte je Meßstelle Auswert und Protokoll-Software ZPTEC2-042 z 187,00 

Schnittstellen: RS232–serielle Druckerschnittst. Digitalwandler zur Vernetzung der ZPTEC2-044 z 189,00 







ProfiTec 4A Kat.Nr.: GPTEC4A Paralleldrucker beim Direktausdruck 


Thermost-Upright freezers 

Thermostat-Upright Freezers are used for continous tempering for different applications , e.g. sample 

storage (4°C), estimation of enzym activities (25°C) or colony quantity at 37°C. The temperature 

range is from 4°C to 40°C, service free and reliable controled with +/- 0,5°C constant temerature. 

technical specifications: 

- complete isolated freezer with universal temperature-control unit 

-2-fold isolated glas in eloxated Aluframe (modell with glas door) 

water protected foil front 

- setting 4 - 40°C in 1°C-steps 

- 2-LCD-displays 

- radiale fun, air stream 320m3/h 

Cat. # volume in liter inserts door 


TS-GT-180 180 3 Glas 


TS-GT-260 260 4 Glas 


TS-GT-360 360 5 Glas 


TS-GT-500 500 6 Glas 

Cat. # weight 

Inner dimension LxWxH in 

mm 

Outer dimension LxWxH in 

mm 

TS-ST-180 39,00 kg 513 x 433 x 702 602 x 600 x 850 mit Arbeitsplatte 965,00 

TS-GT-180 50,00 kg 513 x 433 x 702 602 x 600 x 855 mit Arbeitsplatte 1098,00 

TS-ST-260 49,00 kg 513 x 433 x 1074 602 x 600 x 1200 1255,00 

TS-GT-260 66,50 kg 513 x 433 x 1200 602 x 600 x 1200 1398,00 

TS-ST-360 64,50 kg 513 x 433 x 1418 602 x 600 x 1611 1445,00 

TS-GT-360 82,00 kg 513 x 433 x 1418 602 x 600 x 1611 1598,00 

TS-ST-500 79,5 kg 646 x 516 x 1338 755 x 715 x 1515 1745,00 

TS-GT-500 98,5 kg 646 x 516 x 1338 755 x 715 x 1515 1945,00 

Explosion-protected Laboratory uprighr freezers 

Technical Specification EX -freezer: 

- temperature range steppless 2-12°C 

- automatic defrosting 

- nockable door 

- inside white PS 

- Ex-protection: inside free of ignition sources 



Euro






Cat. # weight Inner dimension LxWxH in mm Outer dimension LxWxH in mm Euro 

TEX-180 37,00 kg 734 x 513 x 433 850 x 602 x 600 669,00 

TEX-260 46,50 kg 1047 x 513 x 433 1215 x 602 x 600 709,00 

TEX-360 62,00 kg 1418 x 513 x 433 1589 x 602 x 600 845,00 

TEX-500 77,00 kg 1338 x 646 x 516 1515 x 755 x 715 989,00 


Quali - Stickers are precutted labels for tubes 0,2 - 2,0ml. They are convenient to use, simply write 

on the label, peel of from the backing paper and press into position on the tube. Quali - Stickers are 

temperature resistant from -196°C to +121°C. 

Quali - stickers adhere to all plastics, they will not smear, dry out, peel or fall off. Quali stickers can 

be used in freezers, liquid nitrogen and boiling water. They will accept all marker pens and are 

supplied in rolls of 1000 stickers, exept the laser stickers, which are supplied on sheets and come 

with printing instructions. 

Cat. # size For tubes Pack size Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 Stück 29,10 




Cryoboxes with hinged lid for 50 und 100 1,5/2,0ml tubes 

The 100 place cryobox features a three point hinged lid, that locks for secure lid closure. The 100 

place cryobox also features imprinted coordinates on the base and molded grid lines on the lid. The 

neon mixed versions include blue, green, pink, yellow and orange. The cryobox withstands -80°C 

and the hinged lid is easy to openeven when frozen. 

dimension: R030: 141 x 80 x 55mm ( W x D x H ) 


Cat. # Places / ml color Pack size Euro 

R030 50x1,5/2,0 natural 5 24,90 

R030-A 50x1,5/2,0 neon mix 5 25,90 

R031 100x1,5/2,0 natural 5 33,25 

R031-A 100x1,5/2,0 neon mix 5 34,25 

Quali-Box, 96 place Cryo Card Box for 1,5 & 2,0ml Tubes 



White card box made from deep temperature resistant waterproofed cardboard material. 

Dimensions: 174 x 122 x 51mm 

Divider: 8 x 12places/ 30mm hight 

Cat.# Description size Euro 

R096 Quali-96 place Box 174x122x51mm 5,25 



Cryobox wit telescope lid, our new 81 place topversion, impoved version 

Only this 81 place cryobox has imprinted coordinates on the base, the lid is now glas clear for 

better sample identification. 

These polypropylene cryobox can be stored up to -150°C, autoclaved and is available in neon 

colors blue, green, orange, pink and yellow. 

Dimensions: R14 & R15: 130 x 130 x 45mm ( W x D x H ) 


R014 natural 5 17,65 

R015 neon mix 5 17,65 

R014-1 natural 1 3,70 


R015-GR neon green 1 3,70 

R015-GE neon yellow 1 3,70 



Economy Cryobox Serie with Telescopelid, size 130 x 130 x 45mm 

This box made from deep temperature resistant polypropylene, freezable up to -190 C° and 

autoclavable. Transparent telescope lid for easy sample identification. The boxes with 9 x 9 dividers 

are available in differnt colours: 5 x neon, 7 x standard. The boxes with other dividers or blank boxes 

are neon coloured and can be delivered in other colours on request. 


Cat. # Colour Euro Euro 

R034 natural 2,80 2,70 

R034-NGE neon-yellow 2,90 2,80 

R034-NBL neon-blue 2,90 2,80 

R034-NGR neon-green 2,90 2,80 




Cat. # clour Euro Euro 

R034-W white 3,35 3,25 

R034-GE yellow 3,35 3,25 

R034-BL blue 3,35 3,25 

R034-GR green 3,35 3,25 

R034-RO red 3,50 3,40 

R034-PI pink 3,50 3,40 

R034-SW black 3,50 3,40 




Cat. # colour Euro Euro 

R034-7 natural 3,10 2,95 

R034-7-NGE neon-yellow 3,60 3,50 

R034-7-NBL neon-blue 3,60 3,50 

R034-7-NGR neon-green 3,60 3,50 

R034-7-NPI neon-pink 3,60 3,50 




R034-8 natural 3,35 3,25 

R034-8-NGE yellow 3,85 3,75 

R034-8-NBL blue 3,85 3,75 

R034-8-NGR green 3,85 3,75 

R034-8-NPI pink 3,80 3,70 

R034-8-NOR orange 3,80 3,70 



R034-B natural 1,95 1,85 

R034-B-NGE neon-yellow 1,95 1,85 

R034-B-NBL neon-blue 1,95 1,85 

R034-B-NGR neon-green 1,95 1,85 



Dividers 30mm 1-49 units 50+ units 

Cat. # Tubes Euro Euro 

R034-R-13 13x13/8 2,40 2,30 

R034-R-12 12x12/8 1,65 1,60 

R034-R-10P 10x10/8 Plastic 1,20 1,15 

R034-R-9P 9x9/8 Plastic 1,35 1,30 

R034-R-8P 8x8/8 Plastic 1,35 1,30 

R034-R-7 7x7/8 1,35 1,30 

Cryoboxes Polypropylene for 0,2ml -- 0 ,5ml -- 15ml und 50ml Tubes 



made from ridid ultra low temperature polypropylen with hightransparent lid, neon - colours, storage 

up to 80°C possible, autoclavable. 

Cat.# for Tubes mm Ø places dimension in mm Euro 

R039-natural 12,5 9 x 9 130x130x70-80 3,15 

R039-yellow 12,5 9 x 9 130x130x70-80 3,70 

R039-blue 12,5 9 x 9 130x130x70-80 3,70 

R039-green 12,5 9 x 9 130x130x70-80 3,70 

R039-red 12,5 9 x 9 130x130x70-80 3,70 

R039-orange 12,5 9 x 9 130x130x70-80 3,70 

R039-7-natural 16,5 7 x 7 130x130x70-80 3,40 

R039-7-yellow 16,5 7 x 7 130x130x70-80 3,90 

R039-7-blue 16,5 7 x 7 130x130x70-80 3,90 

R039-7-green 16,5 7 x 7 130x130x70-80 3,90 

R039-7-red 16,5 7 x 7 130x130x70-80 3,90 

R039-7-orange 16,5 7 x 7 130x130x70-80 3,90 

R039-1-natural without divider 1 130x130x70-80 2,75 

R039-1-yellow without divider 1 130x130x70-80 3,15 

R039-1-blue without divider 1 130x130x70-80 3,15 

R039-1-green without divider 1 130x130x70-80 3,15 

R039-1-red without divider 1 130x130x128 3,15 

R039-1-orange without divider 1 130x130x128 3,15 

Dividers 

Cat. # for Tubes Hight Euro 

R039-R-13 8 30 mm 2,35 

R039-R-12 9 30 mm 1,70 

R039-R-10P 12 30 mm 1,20 

R039-R-9P 13 30 mm 1,35 

R039-R-8P 14 30 mm 1,35 

R039-R-7 16,5 30 mm 1,35 

R039-R-6 19,5 30 mm 1,75 

R039-R-5 23,5 30 mm 1,20 

R039-R65-13 8 65 mm 2,50 

R039-R65-12 9 65 mm 1,90 

R039-R65-10 12 65 mm 1,90 

R039-R65-9 13 65 mm 1,90 

R039-R65-8 14 65 mm 1,90 

R039-R65-7 16,5 65 mm 1,95 

R039-R65-6 19,5 65 mm 1,90 

R039-R65-5 23,5 65 mm 1,90 




made from ridid ultra low temperature polypropylen with hightransparent lid, neon - colours, storage 

up to 190°C possible, autoclavable. 

Cat.# Tubes places size in mm Euro 

R035-natural PCR 0,2ml 12x12 130x130x32 5,90 

R035-yellow PCR 0,2ml 12x12 130x130x32 5,90 

R035-blue PCR 0,2ml 12x12 130x130x32 5,90 

R035-green PCR 0,2ml 12x12 130x130x32 5,90 

R035-red PCR 0,2ml 12x12 130x130x32 5,90 


R036-natural Mini 0,5ml 10x10 130x130x37 5,80 

R036-yellow Mini 0,5ml 10x10 130x130x37 5,80 

R036-blue Mini 0,5ml 10x10 130x130x37 5,80 

R036-green Mini 0,5ml 10x10 130x130x37 5,80 

R036-red Mini 0,5ml 10x10 130x130x37 5,80 


R037-natural Cell Box 15ml 25 130x130x128 8,25 

R037-yellow Cell Box 15ml 25 130x130x128 8,25 

R037-blue Cell Box 15ml 25 130x130x128 8,25 

R037-gree Cell Box 15ml 25 130x130x128 8,25 

R037-red Cell Box 15ml 25 130x130x128 8,25 


R038-natural Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-yellow Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-blue Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-green Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-red Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 



Inventory racks with handle for chest units for cryoboxes up to 136 x 136 mm square in 50/75/100mm 

hight 

Cat. # Quantity/ Boxhight W x D x H in mm Euro 

TG-5 5 x 50mm 141 x 141 x 279 54,90 



TG-6 6X 50mm 141 x 141 x 334 59,90 

TG-7 7 x 50mm 141 x 141 x 389 56,90 

TG-8 8 x 50mm 141 x 141 x 444 57,90 

TG-9 9 x 50mm 141 x 141 x 499 57,90 

TG-10 10 x 50mm 141 x 141 x 554 59,90 

TG-11 11 x 50mm 141 x 141 x 609 58,90 

TG-12 12 x 50mm 141 x 141 x 664 58,90 

TG-13 13 x 50mm 141 x 141 x 719 69,90 

TG-14 14 x 50mm 141 x 141 x 774 75,80 

TG-75-4 4 x 75mm 141 x 141 x 325 52,00 

TG-75-6 6 x 75mm 141 x 141 x 485 53,00 

TG-75-7 7 x 75mm 141 x 141 x 565 53,00 

TG-75-8 8 x 75mm 141 x 141 x 645 58,00 

TG-75-9 9 x 75mm 141 x 141 x 725 71,00 

TG-75-10 10 x 75mm 141 x 141 x 805 81,00 

TG-100-3 3 x 100mm 141 x 141 x 320 69,00 

TG-100-4 4 x 100mm 141 x 141 x 425 70,00 

TG-100-5 5 x 100mm 141 x 141 x 530 71,00 

TG-100-6 6 x 100mm 141 x 141 x 635 76,00 

TG-100-7 7 x 100mm 141 x 141 x 740 81,00 

TG-130-3 3 x 130mm 141 x 141 x 410 79,70 

TG-130-4 4 x 130mm 141 x 141 x 545 82,75 

TG-130-5 5 x 130mm 141 x 141 x 680 90,55 



Inventory racks with handle for Upright freezers for boxes up to 136 x 136mm square in 

50/75/100mm hight 

Cat. # no boxes x boxenhight Dimmension Euro 

SG-32-15 3 x 5 x 32mm 142 x 425 x 185 99,95 

SG-32-18 3 x 6 x 32mm 142 x 425 x 224 106,45 

SG-32-21 3 x 7 x 32mm 142 x 425 x 264 112,80 

SG-32-20 4 x 5 x 32mm 142 x 565 x 185 105,95 

SG-32-24 4 x 6 x 32mm 142 x 565 x 224 111,60 

SG-32-28 4 x 7 x 32mm 142 x 565 x 264 117,90 

SG-8 4 x 2 x 50mm 142 x 285 x 223 95,85 

SG-9 3 x 3 x 50mm 142 x 425 x 169 86,40 

SG-10 2 x 5 x 50mm 142 x 285 x 277 101,25 

SG-12 3 x 4 x 50mm 142 x 425 x 223 86,90 



SG-15 3 x 5 x 50mm 142 x 425 x 277 99,70 

SG-16 4 x 4 x 50mm 142 x 565 x 223 98,10 

SG-20 4 x 5 x 50mm 142 x 565 x 277 121,70 

SG-75-6 3 x 2 x 75mm 142 x 425 x 163 76,70 

SG-75-8 4 x 2 x 75mm 142 x 565 x 163 79,75 

SG-75-9 3 x 3 x 75mm 142 x 425 x 242 86,90 

SG-75-10 5 x 2 x 75mm 142 x 705 x 163 112,50 

SG-75-12 4 x 3 x 75mm 142 x 565 x 242 99,20 

SG-100-6 3 x 2 x 100mm 142 x 425 x 212 86,40 

SG-100-8 4 x 2 x 100mm 142 x 565 x 212 99,20 



Inventory racks with handle for Upright freezers for boxes up to 136 x 136mm square in 50mm hight 




SGSA-2/2 2 x 2 140x301x123 119,95 

SGSA-2/3 2 x 3 140x301x184 123,80 

SGSA-2/4 2 x 4 140x301x245 132,50 

SGSA-2/5 2 x 5 140x301x306 142,50 

SGSA-2/6 2 x 6 140x301x367 151,50 

SGSA-3/2 3 x 2 140x434x123 127,50 

SGSA-3/3 3 x 3 140x434x184 131,50 

SGSA-3/4 3 x 4 140x434x245 136,50 

SGSA-3/5 3 x 5 140x434x306 144,50 

SGSA-3/6 3 x 6 140x434x367 154,50 

SGSA-4/2 4 x 2 140x567x123 129,50 

SGSA-4/3 4 x 3 140x567x184 132,50 

SGSA-4/4 4 x 4 140x567x245 137,50 

SGSA-4/5 4 x 5 140x567x306 146,50 

SGSA-4/6 4 x 6 140x567x367 156,50 

SGSA-5/2 5 x 2 140x700x123 143,50 

SGSA-5/3 5 x 3 140x700x184 146,50 

SGSA-5/4 5 x 4 140x700x245 149,90 

SGSA-5/5 5 x 5 140x700x306 165,50 

SGSA-5/6 6 x 6 140x700x367 175,50 




Inventory Racks for Microtiter Plates in format 86 x 128 x 18mm 



Cat. # no boxes x hight w x d x h in mm Euro 

MTG-15 15 x 18mm 91 x 133 x 305 84,35 

MTG-16 16 x 18mm 91 x 133 x 325 86,90 

MTG-17 17 x 18mm 91 x 133 x 345 89,45 

MTG-18 18 x 18mm 91 x 133 x 365 92,00 

MTG-19 19 x 18mm 91 x 133 x 385 94,60 

MTG 20 20 x 18mm 91 x 133 x 405 97,15 

MTG-21 21 x 18mm 91 x 133 x 425 99,70 

MTG-22 22 x 18mm 91 x 133 x 445 102,25 

MTG-23 23 x 18mm 91 x 133 x 465 104,80 

MTG-24 24 x 18mm 91 x 133 x 485 107,40 

MTG-25 25 x 18mm 91 x 133 x 505 109,90 

MTG-26 26 x 18mm 91 x 133 x 525 112,50 

MTG-27 27 x 18mm 91 x 133 x 545 115,05 

MTG-28 28 x 18mm 91 x 133 x 565 118,10 

MTG-29 29 x 18mm 91 x 133 x 585 120,15 

MTG-30 30 x 18mm 91 x 133 x 605 122,70 

MTG-31 31 x 18mm 91 x 133 x 625 125,25 

MTG-32 32 x 18mm 91 x 133 x 645 127,80 

MTG-33 33 x 18mm 91 x 133 x 665 130,40 

MTG-34 34 x 18mm 91 x 133 x 685 132,95 

MTG-35 35 x 18mm 91 x 133 x 705 135,50 

MTG-36 36 x 18mm 91 x 133 x 725 138,55 

MTG-37 37 x 18mm 91 x 133 x 745 140,60 

MTG-38 38 x 18mm 91 x 133 x 765 143,15 

Stainless Steal Racks for upright freezers with pull-out-stopp for Microtiterplates 86 x 128 x 

18mm 

Horizontal stainless steel racks with pullout-stop for upright 

freezers 


Cat. # number of plates w x d x h in mm Euro 

MSG-4/8 4 x 8 135x379x209 141,65 

MSG-4/9 4 x 9 135x379x235 150,85 



MSG-4/10 4 x 10 135x379x261 159,50 

MSG-4/11 4 x 11 135x379x287 167,20 

MSG-4/12 4 x 12 135x379x313 175,90 

MSG-4/13 4 x 13 135x379x339 183,55 

MSG-4/14 4 x 14 135x379x365 191,75 

MSG-4/15 4 x 15 135x379x391 200,40 

MSG-4/16 4 x 16 135x379x417 208,10 

MSG-5/8 5 x 8 135x465x209 147,00 

MSG-5/9 5 x 9 135x465x235 156,45 

MSG-5/10 5 x 10 135x465x261 164,50 

MSG-5/11 5 x 11 135x465x287 172,50 

MSG-5/12 5 x 12 135x465x313 180,90 

MSG-5/13 5 x 13 135x465x339 189,10 

MSG-5/14 5 x 14 135x465x365 197,30 

MSG-5/15 5 x 15 135x465x391 205,50 

MSG-5/16 5 x 16 135x465x417 213,70 

MSG-6/8 6 x 8 135x551x209 151,85 

MSG-6/9 6 x 9 135x551x235 161,05 

MSG-6/10 6 x 10 135x551x261 169,25 

MSG-6/11 6 x 11 135x551x287 177,40 

MSG-6/12 6 x 12 135x551x313 185,60 

MSG- 6/13 6 x 13 135x551x339 193,80 

MSG- 6/14 6 x 14 135x551x365 201,95 

MSG- 6/15 6 x 15 135x551x391 210,15 

MSG- 6/16 6 x 16 135x551x417 218,30 

Stainless Steal Racks for upright freezers stopp for Slide Boxes, Typ R100, 222 x 171 x 

33mm,LxWxH L 

Cat. # Quantity Boxes hight x depth B x L x H in mm Euro 

OSG-5/2 5 x 2 187 x 466 x 189 190,00 

OSG-6/2 6 x 2 187 x 466 x 227 218,00 

OSG-7/2 7 x 2 187 x 466 x 264 248,00 

OSG-8/2 8 x 2 187 x 466 x 302 280,00 

OSG-5/3 5 x 3 187 x 688 x 189 209,00 

OSG-6/3 6 x 3 187 x 688 x 227 245,00 

OSG-7/3 7 x 3 187 x 688 x 264 280,00 

OSG-8/3 8 x 3 187 x 688 x 302 315,00 





waterproofed cardbox (st=standard) or with additional special waterproofed plastic 

cover( sp= special). All boxes are supplied with lid and dividers as described in 







136x136x25mm 


136x136x32mm 


136x136x50mm 


140x140x50mm 

Cat. # Euro Cat. # Euro Cat.# Euro Cat. # Euro 

301115WE-1 5,50 301016WE-1 4,30 301100WE-1 3,20 301014WE-1 4,20 

301115WE-2 6,55 301016WE-2 5,35 301100WE-2 4,40 301014WE-2 5,40 

301115GE-1 6,00 301016GE-1 5,40 301100GE-1 5,05 301014GE-1 5,20 

301115GE-2 7,05 301016GE-2 6,70 301100GE-2 6,60 301014GE-2 6,75 

301115BL-1 6,00 301016BL-1 5,40 301100BL-1 5,05 301014BL-1 5,20 

301115BL-2 7,05 301016BL-2 6,70 301100BL-2 6,60 301014BL-2 6,75 

301115GR-1 6,00 301016GR-1 5,40 301100GR-1 5,05 301014GR-1 5,20 

301115GR-2 7,05 301016GR-2 6,70 301100GR-2 6,60 301014GR-2 6,75 

301115RO-1 6,00 301016RO-1 5,40 301100RO-1 5,05 301014RO-1 5,20 

301115RO-2 7,05 301016RO-2 6,70 301100RO-2 6,60 301014RO-2 6,75 





"long" 


136x268x25mm 

EPPI-Mini A 0,5 "long" 


136x268x32mm 


"long" 


136x268x50mm 


"long" 


140x276x50mm 

Cat. # Euro Cat. # Euro Cat. # Euro Cat. # Euro 

301115LWE-1 11,50 301016LWE-1 10,40 301100LWE-1 9,70 301014LWE-1 11,00 

301115LWE-2 13,70 301016LWE-2 11,50 301100LWE-2 10,80 301014LWE-2 11,95 

301115LGE-1 12,60 301016LGE-1 11,65 301100LGE-1 10,80 301014LGE-1 11,75 

301115LGE-2 14,65 301016LGE-2 13,00 301100LGE-2 11,80 301014LGE-2 12,75 

301115LBL-1 12,60 301016LBL-1 11,65 301100LBL-1 10,80 301014LBL-1 11,75 



301115LBL-2 14,65 301016LBL-2 13,00 301100LBL-2 11,80 301014LGL-2 12,75 

301115LGR-1 12,60 301016LGR-1 11,65 301100LGR-1 10,80 301014LGR-1 11,75 

301115LGR-2 14,65 301016LGR-2 13,00 301100LGR-2 11,80 301014LGR-2 12,75 

301115LRO-1 12,60 301016LRO-1 11,65 301100LRO-1 10,80 301014LRO-1 11,75 

301115LRO-2 14,65 301016LRO-2 13,00 301100LRO-2 11,80 301014LRO-2 12,75 


For storage of samples in tubes, boxes are made from deep temperature resisting 

waterproofed cardbox( st= standard) or with additional special waterproofed plastic 

cover (sp = special). All boxes are supplied with lid and divders and available in 




Useful for all tubes up to 22mm Ø(for 15ml) or 34mm Ø (for50 ml) and a total 

lenght of 125mm 



5x5 places, 

122x122x128mm 

6x6 places, 

148x148x128mm 

3x3 places, 

122x122x128mm 

4x4 places, 148x148x128mm 


301017WE-1 8,90 301019WE-1 9,35 301018WE-1 8,50 301020WE-1 9,00 

301017WE-2 10,20 301019WE-2 10,75 301018WE-2 9,80 301020WE-2 10,35 

101017GE-1 10,45 301019GE-1 11,10 301018GE-1 10,05 301020GE-1 10,60 

301017GE-2 11,80 301019GE-2 12,50 301018GE-2 11,35 301020GE-2 12,00 

301017BL-1 10,45 301019BL-1 11,10 301018BL-1 10,05 301020BL-1 10,60 

301017BL2 11,80 301019BL-2 12,50 301018BL-2 11,35 301020BL-2 12,00 

301017GR-1 10,45 301019GR-1 11,10 301018GR-1 10,05 301020GR-1 10,60 

301017GR-2 11,80 301019GR-2 12,50 301018GR-2 11,35 301020GR-2 12,00 

301017RO-1 10,45 301019RO-1 11,10 301018RO-1 10,05 301020RO-1 10,60 

301017RO-2 11,80 301019RO-2 12,50 301018RO-2 11,35 301020RO-2 12,00 

CellBox Cellculture; freezing- and storageboxes for 15 ml and 50 ml Falcons, long version 




5x10 places, 

122x240x128mm 

6x12 places, 

148x291x128mm 


3x6 places, 

122x240x128mm 

4x8 places, 

148x291x128mm



301140WE-1 12,50 301142WE-1 13,00 301141WE-1 11,95 301143WE-1 12,45 

301140WE-2 14,35 301142WE-2 14,95 301141WE-2 13,75 301143WE-2 14,30 

301140GE-1 14,80 301142GE-1 15,35 301141GE-1 14,10 301143GE-1 14,70 

301140GE-2 15,80 301142GE-2 16,00 301141GE-2 15,45 301143GE-2 15,55 

301140BL-1 14,80 301142BL-1 15,35 301141BL-1 14,10 301143BL-1 14,70 

301140BL-2 15,80 301142BL-2 16,00 301141BL-2 15,45 301143BL-2 15,55 

301140GR-1 14,80 301142GR-1 15,35 301141GR-1 14,10 301143GR-1 14,70 

301140GR-2 15,80 301142GR-2 16,00 301141GR-2 15,45 301143GR-2 15,55 

301140RO-1 14,80 301142RO-1 15,35 301141RO-1 14,10 301143RO-1 14,70 

301140RO-2 15,80 301142RO-2 16,00 301141RO-2 15,45 301143RO-2 15,55 

Cardboxes 

Cardboxes for storage of samples, 136 x 136 mm square, 50/75/100mm high, material 

made from deep temperature waterproofed cardbox, with special water resistant plastic 

cover. The boxes are available in different hights and can be used with the listed dividers for 

tubes from 8 - 21 mm Ø. 

Cat. # Description Size Euro 

SB-32 box 32mm 2,45 

SB-50 box 50mm 1,75 

SB-75 box 75mm 2,70 

SB-100 box 100mm 5,05 

SB-130 box 130mm 6,90 


SB-R-4 divider 4 x 4/31mm 1,80 

SB-R-5 divider 5 x 5 / 21mm 1,50 









Further boxes with other sizes, e.g. 133 x 133mm base are availble on request. 

Cryotubes, sterile, polypropylen, internal thread with silicone washer 



Designed for storing of biological material, human or animal cells, at temperature of -196°C. A 

silicone seal between the cap and the tubes ensures a positive leakproof seal at all 

temperatures. A 1-1/4 turn of the cap is sufficient to seal the vial. Closure and tubes are both 

manufactured of polypropylene having the same coefficient of expansion, which ensures an 

equally secure seal both at room temperature and at low cryogenic temperatures. Tubes have 

a white marking area, can be colour coded with cap inserts and are compatible with most 

storage systems. Sterilized by gamma radiation and packed in resealable safty-lock bags of 

100. 

Cat. # Volume Form Dimension Euro 

CV11-1 1,2ml freestanding 12,5 x 43 22,90 


CV11-3 2,0ml round bottom 12,5 x 48 22,90 


CV11-4A 4,0ml freestanding 12,5 x 72 24,90 


Cryotubes, sterile, polypropylen, external thread with silicon washer 

100 Tubes 

The long form of the caps garantes a simple one hand handling. The standard features of the high security tubes allows storage 

as low as - 196 degrease. The tubes are delivered sterile in bags of 100. 

100 Tub. 

Cat. # Volume Form dimension Euro 







Coulored cap inserts, pp for CV-10 and CV-11 line 

Coulored cap inserts for sample coding 

Cat. # colour Euro/500St. 

CVI-M mixed 14,40 


Cryotubes with safety lid made from high quality polypropylene. Silicone free, no 

risk for contaminations. Tight sealing screw cap with Safe-Sealing Lip. Simple 

handling by star-bottom. DNase-, RNase-, endotoxin- und cadmium free. 

Cat. # Volumene Unit Euro. 

CV-VL-1 1,2ml 10 x 100 149,00 



CV-VL-2 2,0ml 10 x 100 149,00 

CV-VL-4 4,0ml 5 x 100 84,00 

CV-VL-5 5,0ml 5 x 100 89,00 


Coulored Cap Inserts fitting into the lids of the cryotubes for easy identification; delivered to 500 pc. 

Cat. # coulor Euro/500 

CV-VL-W white 8,90 

CV-VL-G yellow 8,90 

CV-VL-B blue 8,90 

CV-VL-GR green 8,90 

CV-VL-R ret 8,90 

CV-VL-V violet 8,90 

CV-VL-GA grey 8,90 


CV-VL-P pink 8,90 

Storage canes 

Storage canes made from aluminium, capacity up to 5 x 1,2 oder 2,0 ml cryotubes; useful 

for storage in liquid nitrogen storage vessels. 

Kat. # length Pack.unit Euro 

CV-H 290mm 12 Stück 10,95 

Cryotube Workstation 

This autoclavable rack holds up to 50 cryotubes and incorporates an universal locking system, which 

locks each vial securely in place. This also enables one hand cap removal. 

Cat. # Pack.unit colour Euro 

CV-WB 1 blue 16,75 



Flüssigstickstoff. Durch hochwirksame Isolierung, eingebunden in eine Aluminiumkonstruktion, gehören sie zu den leichtesten 

und effizientesten verfügbaren Cryo-Behältern. Heben und Ausgießen werden durch entsprechende Form und Griffteile 

vereinfacht. Die Behälter können mit Ausgußtüllen, Druckentnahmevorrichtungen oder Kellen befüllt und entleert werden 

A. Easy maintanance lid design 

B. High strength neck tube reduces liquid nitrogen loss 

C. Advanced Chemical Vacuum Retention System- designed for superior vacuum, performance over the life of the 

product. 5 years vacuum warrenty 

D. Superior strength, lightwise aluminium construction 

E. Insulation - MVE`s advanced insulation system provides maximum thermal performance 

Cat. Nr., Modell LAB 4 LAB 5 LAB 10 LAB 20 LAB30 LAB 50 

Price in Euro 395,00 425,00 479,00 658,00 769,00 1.010,00 

storagekap. in Liter liquid-N 4 5 10 21 32 50 

Evaporation rate(Liter/day) 0,19 0,15 0,18 0,18 0,22 0,49 



holdingtime in days 18 33,3 55,6 116,7 128 111 

dimensions 

neck opening in mm 35,5 56 56 51 64 64 

working hight in mm 198 266 343 348 387 559 

total hight in mm 426 462 546 627 611 779 

outerdimension in mm 185 222 260 368 432 432 

innerdimension in mm 139 165 210 289 356 356 

weight empty / filled in kg 2,7 / 6 4/8 6/14 9/26 12/38 15 / 56 


Top of Page

Kisker-Biotech - products for autoradiography 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Kisker X-ray cassetts have a simple, but abolutly safe looking system and are high quality 

light tight instruments for the production of autoradiographs in molecular biology. For 

exposure at deep temperature up to - 70°C we offer extra rivetet cassetts, which guarantee 

absolutly stability. 






* offered in standard and and with additional garant stability up to -70°C 

Also we manufacture special custom sizes on request. Please ask for quotation. 



& DNA 

Measurement 



Size in cm Cat. # standard Euro Cat.# riveted Euro 

9 x 12 120001 69,00 -- 


13 x 18 120002 79,25 ZV0002 84,35 

15 x 30 120003 86,90 ZV0003 92,00 

15 x 40 120004 122,20 ZV0004 127,30 

18 x 24 120005 93,00 ZV0005 96,00 

18 x 43 120006 125,25 ZV0006 127,30 

20 x 25 -- ZV0025 117,10 

20 x 40 120007 122,20 ZV0007 127,30 

20 x 60 120008 218,80 ZV0008 229,55 

20 x 80 120009 275,60 ZV0009 280,70 

20 x 96 120010 399,30 ZV0010 408,50 

24 x 30 120012 110,45 ZV0012 117,60 

30 x 40 120014 122,70 ZV0014 132,95 

30 x 60 120015 276,60 ZV0015 296,00 

30 x 80 120016 403,90 ZV0016 416,70 

30 x 90 120017 444,30 ZV0017 449,90 

35 x 35 120019 135,50 ZV0019 145,70 

35 x 43 120020 144,70 ZV0020 152,90 

40 x 40 120022 152,90 ZV0022 158,00 

Intesifying Screens 

file:///F|/Kisker/Kisker/radio.htm (1 von 4) [08.12.2005 22:31:10]


We offer two lines of high quality intensifying screens. The intensifying screens increase the sensitivity of the X-ray films. 

*Typ Universal - sensitivity 100, Calcium-Tungstate, blue emitting, no static loading,low intensification, very good solution. 

*Typ Extrarapid - sensitivity 200, Calcium-Wolframat, blue emitting, high intesification, very good resulotion, free election of 

standard films, replacing the formerly available "Cronex lightning plus", our most popular CaWO4 screen 


Size Cat.#.Universal. Euro Cat. # Extrarap Euro 

9 x 12 212001 19,95 

13 x 18 212002 31,60 E1318 39,90 

15 x 30 212003 48,90 

15 x 40 212004 67,80 E1540 79,25 

18 x 24 212005 47,90 E1824 55,00 

18 x 43 212006 67,50 E1843 91,90 

20 x 25 61,90 E 2025 79,00 

20 x 40 212007 97,15 E2040 109,90 

20 x 60 212008 193,80 E2060 193,80 

20 x 80 212009 232,60 E2080 232,60 

20 x 96 212010 265,35 

24 x 24 212011 81,30 

24 x 30 212012 71,90 E2430 86,65 

30 x 40 212014 96,70 E3040 138,00 

30 x 60 212015 254,60 

30 x 90 212016 354,80 

35 x 35 212018 142,35 E3535 152,45 

35 x 43 212019 175,95 E3543 185,85 

40 x 40 212021 181,35 E4040 198,40 




201001 Cleaning solution 250 ml 14,85 

201002 Cl. Sol. with sprayer 250 ml 19,95 

Film hangers 

Our film hangers are made from stainless, polished steel and are available in useful sizes. The patented 

closers in the corners are constructed, to avoid in any way damaging of the film, when placing into the frame, 

while the film is fixed strongly and dryes completly up to the corner. All film hangers are supplied with a 46cm 

long holder bar. 

Cat. # Size Euro 

FR1318 13 x 18 cm 28,10 

FR1530 15 x 30 cm 28,10 

FR1540 15 x 40 cm 28,10 

FR1824 18 x 24 cm 28,10 

FR1843 18 x 43 cm 40,40 

FR2025 20 x 25 cm 40,40 

FR2040 20 x 40 cm 30,20 



FR3040 30 x 40 cm 30,20 

FR3535 35 x 35 cm 30,20 

FR3543 35 x 43 cm 30,20 

FR4040 40 x 40 cm 30,20 


Fuji X-ray films for autoradiography are of highest quality and useful for all types of experiments. 

Proteines and DNA`s may be marked with all types of radioisotopes. The Fuji RX film is a on both 

sides covered X-ray film with high contrast for all autoradiography experiments. He is of high 

sensitivity for exposure with all UV/blue emitting Calcium-Wolframat- or rare earth intensifying 

screens. The films are supplied in packs of 100 sheets. 

Cat. # size in cm Euro 

RX1318 13 x 18 35,30 

RX 1824 18 x 24 60,85 

RX2430 24 x 30 101,75 

RX2040 20 x 40 111,95 

RX3040 30 x 40 165,15 

RX3535 35 x 35 178,45 

RX3543 35 x 43 214,20 


Cat. # Material size power Euro 

A005 metal 24 x 30 4 x 8 Watt 299,90 

A007 metal 36 x 43 2 x 15 Watt 299,90 

A008 metal 72 x 43 4 x 15 Watt 375,00 

A009 metal 108x43 6 x 15 Watt 465,00 


A practical and robust developer made of PVC, offering an economical alternative to 

expensive routine units. It is suitable for the development of autoradiography in the research 

sector and is available in two formats, up to 24 x 30 cm and 35 x 43 cm. 




1 x 8,5 L tank with lid 

1 set-on-try 












file:///F|/Kisker/Kisker/radio.htm (4 von 4) [08.12.2005 22:31:10] 

Top of Page


Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Autoradiographie - Röntgenkassetten 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Unsere Riegelschlußkassetten zeichnen sich aus durch: 

höchste Bildgüte durch exakten Film/Folienkontakt 

oberflächenversiegelten PE-Schaumstoff innen 

extreme Langlebigkeit durch kunststoffbeschichtetes Aluminium; dauerhaft antistatisch 

lieferbar mit zusätzlicher Vernietung mit garantierter Kassetten-Stabilität bis -70°C 

Anfertigungen nach Kundengrößen und Reparaturservice 

geringere Strahlenabsorption als DIN-Maß 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 




Grösse in cm Kat. # standard Euro Kat.# vernietet Euro 

9 x 12 120001 69,00 -- 

13 x 18 120002 79,25 ZV0002 84,35 

15 x 30 120003 86,90 ZV0003 92,00 

15 x 40 120004 122,20 ZV0004 127,30 

18 x 24 120005 93,00 ZV0005 96,00 

18 x 43 120006 125,25 ZV0006 127,30 

20 x 25 -- ZV0025 117,10 

20 x 40 120007 122,20 ZV0007 127,30 

20 x 60 120008 218,80 ZV0008 229,55 

20 x 80 120009 275,60 ZV0009 280,70 

20 x 96 120010 399,30 ZV0010 408,50 

24 x 30 120012 110,45 ZV0012 117,60 

30 x 40 120014 122,70 ZV0014 132,95 

30 x 60 120015 276,60 ZV0015 296,00 

30 x 80 120016 403,90 ZV0016 416,70 

30 x 90 120017 444,30 ZV0017 449,90 

35 x 35 120019 135,50 ZV0019 145,70 

35 x 43 120020 144,70 ZV0020 152,90 

40 x 40 120022 152,90 ZV0022 158,00 

Verstärkerfolien 

file:///F|/Kisker/Kisker/deutsch/radio.htm (1 von 4) [08.12.2005 22:31:11]


Typ Universal – Empfindlichkeit-100, Calciumwolframat, blauemittierend, keine statische Aufladung, höchste 

Widerstandsfähigkeit bei mechanischer Belastung, freie Wahl der Standardfilme ohne Änderung der Belichtungsdaten 

Typ Extrarapid - Empfindlichkeit-200, Calciumwolframat, blauemittierend, hohe Verstärkung und sehr gute Zeichenschärfe, freie 

Wahl der Standardfilme, speziell geeignet für molekularbiologische Anwendungen 

Grösse Kat.#.Universal Euro Kat. # Extrarapid Euro 

9 x 12 212001 19,95 

13 x 18 212002 31,60 E1318 39,90 

15 x 30 212003 48,90 

15 x 40 212004 67,80 E1540 79,25 

18 x 24 212005 47,90 E1824 55,00 

18 x 43 212006 67,50 E1843 91,90 

20 x 25 61,90 E 2025 79,00 

20 x 40 212007 97,15 E2040 109,90 

20 x 60 212008 193,80 E2060 193,80 

20 x 80 212009 232,60 E2080 232,60 

20 x 96 212010 265,35 

24 x 24 212011 81,30 

24 x 30 212012 71,90 E2430 86,65 

30 x 40 212014 96,70 E3040 138,00 

30 x 60 212015 254,60 

30 x 90 212016 354,80 

35 x 35 212018 142,35 E3535 152,45 

35 x 43 212019 175,95 E3543 185,85 

40 x 40 212021 181,35 E4040 198,40 

Foilienreiniger 

Zur Erhaltung der Antistatik ist es notwendig, die Verstärkerfolien im Abstand von circa 6 Wochen zu reinigen 


201001 Reiniger 250 ml 14,85 

201002 Reiniger mit Sprüher 250 ml 19,95 

Filmrahmen 

Filmrahmen aus nichtrostendem, poliertem Stahl, Sondergrößen sind auf Anfrage erhältich. Die patentierten 

Verschlüsse in den Ecken sind so konstruiert, daß der Film beim Einspannen nicht gelocht oder verletzt, aber 

trotzdem sehr fest gehalten wird und so bis in die Ecken vollkommen austrocknet. 

Alle Rahmen sind mit einem Auflegestab von 46 cm Länge und Gummitüllen versehen 

Kat. # Grösse Euro 

FR1318 13 x 18 cm 28,10 

FR1530 15 x 30 cm 28,10 

FR1540 15 x 40 cm 28,10 

FR1824 18 x 24 cm 28,10 

FR1843 18 x 43 cm 40,40 

FR2025 20 x 25 cm 40,40 

FR2040 20 x 40 cm 30,20 



FR3040 30 x 40 cm 30,20 

FR3535 35 x 35 cm 30,20 

FR3543 35 x 43 cm 30,20 

FR4040 40 x 40 cm 30,20 

Fuji Röntgenfilm RX 

Fuji Röngenfilme für die Autoradiographie sind von höchster Qualität und geeignet für alle 

Experimenttypen. Proteine und Nukleinsäuren können mit vielen Typen von Radioisotopen markiert 

werden. 

Der Fuji RX Film ist ein beidseitig beschichteter Röntgenfilm mit hohem Kontrast für alle Gebiete der 

Autoradiographie und hoher Empfindlichkeit zur Belichtung mit allen UV/blau emittierenden 

Calciumwolframat- oder Seltenenerden-Verstärkerfolien. 

Packungseinheit 100 Blatt 

Kat. # Grösse in cm Euro 

RX1318 13 x 18 35,30 

RX 1824 18 x 24 60,85 

RX2430 24 x 30 101,75 

RX2040 20 x 40 111,95 

RX3040 30 x 40 165,15 

RX3535 35 x 35 178,45 

RX3543 35 x 43 214,20 

Röntgenschaukästen 

Kat. # Material Grösse Anschluss Euro 

A005 Metall 24 x 30 4 x 8 Watt 299,90 



A009 Metall 108x43 6 x 15 Watt 465,00 

Röntgenfilm-Handentwicklung 

Diese praktische und robuste Handentwicklungsanlage aus PVC ist eine preiswerte 

Alternative zu teuren Routineanlagen und für die Entwicklung von Autoradiographien 

im Forschungsbereich geeignet. 

Sie wird in zwei Formaten 24 x 30 cm und 35 x 43 cm angeboten 

Kat. # Grösse Beschreibung/Lieferumfang 

TK2430 für 24x30cm 2 x 7 L Tanks mit Deckel 

A010 für 24x30cm: 7 L Tank mit Deckel 

1 x 8,5 L Tank mit Deckel 

1 x Untersetzschale 

TK3543 für 35x34cm: 2 x 20 L Tanks mit Deckel 

1 x 30 L Tank ohne Deckel 

1 Wanne mit Ablauf 

A011 Schlauchanschluss-Satz für TK3543 

A012 Untergestell für 3 Tanks 



A013 Tank 20 Liter ohne Deckel 


A014 Rührstab aus PVC, 60 cm lang 

A016 Tankthermometer, Edelstahl 10-40°C 

Seitenanfang 


Kisker-Biotech DNA-Workstation 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 





PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Arbeiten mit PCR und anderen molekularbiologischen Techniken erfordert in vielen Fällen 

einen kontaminationsfreien Arbeitsplatz. Die über eine Zeitschaltuhr (0-24 Std) gesteuerte 

UV-Quelle denaturiert unerwünschte DNA an Reagenzien sowie Pipettier-und Laborhilfen in 

5 - 30 Minuten. Die 10 mm starken Acrylwände bzw. 8-10 mm Glaswände sorgen zudem für 

sicheren Schutz vor UV- und Isotopenstrahlung wie z.B. 32P. Das UV-Kabinett (Maße: 69 x 

51 x 57 cm BxTxH, Gewicht 25 kg) hat eine leicht zu reinigende Arbeitsfläche aus Edelstahl 

und steht in verschiedenen Versionen zur Verfügung. So kann auch während des 

Arbeitsvorganges duch den Einsatz des UV/Air-Cleaner Kontaminationsfreiheit garantiert 

werden. Hierbei wird die Luft kontinuierlich mit einem Umwälzvolumen von 25m3/Std direkt 

an einer abgedeckten 254 nm UV-Lampe vorbeigeführt. In den Arbeitspausen kann 

zusätzlich die direkt strahlende UV-Lampe zur Dekontamination von Arbeitsfläche und 

Hilfsmitteln eingesetzt werden. 

Versionen: 

L020: Acrylwände, Unterteil der Frontscheibe hochklappbar, 2 x UV 254 nm 15 Watt, 1 x 

Weißlicht 

L020-C: Acrylwände, Unterteil der Frontscheibe hochklappbar, 1 x UV 254 nm 15 Watt, 1 x 

Weißlicht, 1 x UV/Air-Cleaner 254 nm 

L020S:Acrylwände, Seitenflügelöffnungen, 2 x UV 254 nm 15 Watt, 1 x Weißlicht 

L020-G: alle Seitenteile aus Glas, daher kein Acrylbruch durch UV-Licht, keine 

Einschränkung beim Einsatz von Reinigungsmitteln, Unterteil der Frontscheibe 

hochklappbar, 2 x UV 254 nm 15 Watt, 1 x Weißlicht 

L020-GC: alle Seitenteile aus Glas, daher kein Acrylbruch durch UV-Licht, keine 

Einschränkung beim Einsatz von Reinigungsmitteln, Unterteil der Frontscheibe 

hochklappbar, 1 x UV 254 nm 15 Watt, 1 x Weißlicht, 1 x UV/Air-Cleaner 254 nm 



& DNA 

Measurement 



Kat. # Beschreibung Anschluß Euro 

L020 DNA-Workstation, Acryl 220Volt/50Hz 1.299,00 

L020-C Workstation,Acryl mit UV/Air Cleaner 220Volt/50Hz 1.459,00 

L020-S Workstation Acryl mit 2 Seitenöffnungen 220Volt/50Hz 1.499,00 

L020-G DNA-Workstation, Glas 220Volt/50Hz 1.490,00 

L020-GC Workstation, Glas mit UV/Air Cleaner 220Volt/50Hz 1.750,00 

UV-Cleaner, eine neue Kombination von Laminar Flow und UV-Licht für Reinräume 

file:///F|/Kisker/Kisker/deutsch/dna.htm (1 von 9) [08.12.2005 22:31:13] 

Microparticles


Diese neuartigen Produkte gewährleisten DNA sichere Laborräume ohne direkte UV-Bestrahlung. Die 

Umgebungsluft zirkuliert kontinuierlich mittels eines Ventilators durch das Gerät, welches mit einer Hochenergie 

UV-Lampe und einem Staubfilter ausgerüstet ist. Innerhalb der UV-Box ist die Intensität des UV-Lichtes 1000 

fach verstärkt und somit ausreichend, um DNA komplett zu inaktivieren. Auch mikrobiologische 

Kontaminationen werden stark reduziert. Der UV-Cleaner hat eine Durchströmungskapazitä von 25 m3 Luft / 

Stunde, um in Laborräumen von circa 25 m2 innerhalb von 3 Stunden DNA zu inaktivieren. 

Weitere Vorteile: Kein Wechsel von Hepa-Filtern, Ozonfreie hoch- intensive UV Dekontamination, geräuscharm, 

niedriger Energieverbrauch, lange Lebensdauer der UV-Lampe (8.000 Stunden), kompaktes Gerät für 

Wandmontage. 

Das Gerät wird empfohlen für den Einsatz in Reinräumen wie PCR, DNA-Analyse, Mikrobiologie, Virologie, 

Zellkultur oder anderen Räumen, wo kontaminationsfreie Umgebung benötigt wird. Nach 12 stündigem Einsatz 

reduziert der UV-Cleaner schätzungsweise die CFU ( colony forming unit ) auf 80 - 100 CFU/m3 Luft. 

Keimzahlbestimmungen in einem Operationssaal ergaben einen Anstieg der CFU während einer Operation auf 

500-600 CFU ohne UV-Cleaner, unter dem Einsatz des UV-Cleaners reduzierte sich die Keimzahl auf einen 

Wert von 80-100 CFU/ m3 

L046-M: Gewicht: 3,7kg, Anschluss 220/240 V0lt, 50/60Hz 30 Watt 

Kat. # Bezeichnung Kapaztität/Std Euro 

L046-M UV-Cleaner medium 25m3 399,00 


Dieser kontaminationsfreie kompakte Arbeitsplatz ist geeignet für alle Arbeiten 

mit DNA und PCR- Vorbereitungen zur Vermeidung von 

Kreuzkontaminationen. Das Gerät ist ausgestattet mit einer 254 nm UV-Lampe 

über der Arbeitsfläche, herausziehbarer Filterkassette, Betriebs-stundenzähler 

für den HEPA - Aktivkohlefilter und UV-Anzeiger. Der Luftstrom ist von 0 - 

100% regelbar. Die Arbeitsplatte, die von einer Plexiglashaube überdeckt wird, 

ist aus leicht zu reinigendem Edelstahl. Das Gerät ist in drei Hauben-Versionen 

lieferbar. Die Hauben der Standard- und Sydney-Version können mittels 

Stellschrauben 100mm vor- bzw. zurückgestellt werden. Die USA-Version ist 

mittels Schiebefenster vollständig verschließbar. Spezifikation: 

Anschlusswerte: 220Volt/50Hz/80Watt Abmessung Arbeitsfläche: 470 x 

300mm Lüftungsfläche: 410 x 240mm Aussenmaße Standard: 485 x 540 x 

250mm (BxTxH) Sydney-Version: 485 x 540 x 465mm (BxTxH) USA-Version: 

485 x 540 x 600mm (BxTxH) 


L016 DNA-Workstation (Standard) 1.568,20 

L016-SY DNA-Workstation (Sydney) 1.568,20 

L016-US DNA-Workstation (USA) 1.899,80 

L016-AF HEPA Aktivkohlefilter 40,90 

L016- UV UV-Lampe 45,00 


BIO-LINK 254 nm bietet eine schnelle und zuverlässige Methode, um DNA oder RNA auf 

Nylon- und Nitrocellulosemembranen zu fixieren. Die Methode führt innerhalb von Sekunden 

zu einer stabilen Verbindung zwischen DNA/RNA und der Membran. Dadurch wird ein 

möglicher Probenverlust beim nachfolgenden Hybridisieren vermieden, und die Signalstärke 

gegenüber der herkömmlichen langwierigen thermischen Methode (zwei Stunden "Backen" 

bei 80°C )wesentlich erhöht ( 5 - 10-fach). Das Gerät ist mit fünf Röhren á 8 Watt 

ausgestattet und steht zusätzlich in den Wellenlängen 312 und 365 nm zur Verfügung. Die 

grosse Kammer ( 14,5 x 33,0 x 26 cm HxTxW) bietet Platz für sperrige Teile. 

Die UV-Dosis kann präzise eingestellt werden. 

weitere technische Daten: 

9 voreingestellte Energie-/Zeitprogramme oder manuelle Konfiguration 

maximal UV-Exposition, gemessen in zwei Bereichen:0 - 9,999 Joule und 0-99,99 Joule 

hohe Reproduzierbarkeit durch UV-Sensor 

grosses, einfach zu bedienendes Keybord mit LED-Anzeige 

Abmessungen:30,5 x 36 x 35 cm (HxTxB), Gewicht 10,5 kg 

file:///F|/Kisker/Kisker/deutsch/dna.htm (2 von 9) [08.12.2005 22:31:13]


zusätzlich zum Verlinken der Nukleinsäuren ist BIO-LINK für folgende Anwendungen 

geeignet: 

"Nicking" von DNA in Agarose-Gelen 

teilweiser Restriktionsverdau 

Rec-A Mutations-Screening 

Ausschaltung von PCR-Kontaminationen 


BLX-254 BIO-LINK 254 nm 1.075,00 

BLX-312 BIO-LINK 312 nm 1.075,00 

BLX-365 BIO-LINK 365 nm 1.075,00 

Nitrocellulose-Membranen und Blottingpapiere 

Membran aus 100% reiner Nitrocellulose für den Protein- und Nukleinsäuretransfer, die sich 

durch eine hohe Bindungskapazität von 80 - 100 µg / cm2 und einen geringen Hintergrund 

auszeichnet. 

Für Standardanwendungen wird die Porengröße 0,45 µm, für Proteine mit geringem 

Molekulargewicht (< 20 kDa) und Nukleinsäuren wird die Porengröße 0,2 µm empfohlen, um 

einen Verlust der Proben beim Transferieren zu vermeiden 

Kat. # Beschreibung Abmessungen Pack.einheit Euro 

MNC-0.2 Nitrocellulose-Membran 0,2µ 33 x 300 cm 1 Rolle 169,00 


MBP-0.17 Blotting-Papier 0,17 mm 46 x 57 cm 100 Bögen 99,00 

MNC-0.34 Blotting-Papier 0,34 mm 46 x 57 cm 100 Bögen 149,00 

DiscoverSlip für nur 45 µl Probenvolumen 

Premium Cover Slip für Standard Objektträger 75 x 25 mm 

40 x 20 mm Reaktionskammer mit 45 µl Reaktionsvolumen 

selbst abdichtend - kein Verwendung von Klebstoffen 

einfache und schnelle Positionierung auf dem Glasobjektträger 

einfaches Entfernen nach der Reaktion - kein Brechen des Deckgläschens 

generiert einen homogenen Flüssigkeitsfilm auf dem Objektträger ohne Luftblasen 

kostengünstig - bis zu 10 mal wieder verwendbar 

ideal für Microarray Hybridisierungen und Zellanwendungen ( in situ Hybridisierung, 

Immunohistochemie) 


GK300 DiscoverSlip 4 Stück 48,00 

GK130 PALMhyb (Prozessierungsinstrument für discover slips) 1 System 950,00 

PALMhyb 

Prozessierungsinstrument für den Einsatz von DiscoverSlips 

Aufnahme von bis zu 4 Objektträgern oder Microarrays 

Außenabmaß im SBS-Mikrotiterplatten-Format 

ideal in Kombination mit ThermoSTAR 100 und ThermoTWISTER comfort, Beschreibung 

siehe weiter unten. 





GK140 PALMhyb plus (PALMhyb + ThermoSTAR 100 1 System 1.950,00 

GK145 PALMhyb plus (PALMhyb + ThermoTWISTER comfort) 1 System 2.800,00 

QI Inkubations- und Hybridisierungskammer 

Die LHC-1 Hybridisierungs-, Immobilisierungs- und Inkubationskammer zeichnet sich durch 

Ihre vielfältigen Einsatzmöglichkeiten für molekularbiologische Anwendungen aus. Durch die 

Innenraumausbildung im Mikrotiterplatten-Format ist es aufgrund adaptiver Elemente 

möglich, Prozesse auf Microarrays, Objektträgern, Mikrotestplatten und Tubes 

durchzuführen. Die Kammer kann auf handelsüblichem Laborequipment für Mikrotestplatten 

fixiert und geschüttelt werden. Der Durchmischungseffekt bewirkt weitaus präzisere 

Ergebnisse, wie bei Microarray-Routinen messbar. Eine externe Temperierung kann in 

einem Thermoschrank bis 120°C erfolgen. 


gleichzeitige Prozessierung von bis zu 12 Microarrays oder Objektträgern oder drei 

Mikrotestplatten 

Magnetmechanismus zum unkomplizierten Öffnen auch direkt nach der Temperierung 

magnetische Füsse für sicheren Stand 

Licht-undurchlässiger Deckel für Licht-sensible Reaktionen 

Verwendung chemisch resistenter Materialien. 

Spezifikationen: Abmessungen 140x103x53 mm, Inneraum ANSI/SBS 1-2004 Format 

Objektträgerabmessungen:für verschiedene Plattformen (1" - 3") geeignet, Länge 74-77 

mm, Breite 25,0-25,5 mm, Höhe 0,7-2,0 mm. 


LHC-1 Hybridisierungskammer 1 390,00 

LHC-1/AO Adapter für 4 Objektträger 3 120,00 

LHC-1-S Inkubationssystem LHC-1-S (HC1 + Variomag Teleshake) 1 1.385,00 

QI Hybridisierungskammer 

Die Hybridisierungskammer LHC-4 für 1 bis 4 Objektträger, Mikroarrays oder Zell-Slides 

zeichnet sich durch eine effektive Temperierung während der Hybridisierung mittels 

herkömmlicher Thermoschüttler mit Adaption für Mikrotiterplatten (auch für 

Hybridisierungsöfen und Wasserbäder geeignet) aus. 

Ein magnetischer Anpressmechanismus verhindert bei Nutzung entsprechender 

Thermoschüttler Wärmebrücken zwischen dem Kammerboden und dem Thermoschüttler. 

Die 1 bis 4 Objektträger werden durch einen Kugelmagnet-Mechanismus am Kammerboden 

fest geklemmt, wodurch ebenfalls Wärmebrücken verhindert werden. Durch dieses Prinzip 

können Slides mit einer Dicke zwischen 0,7 und 2,0 mm genutzt werden, wobei der Aufbau 

der Objektträger eine Höhe von bis zu 15, 0 mm aufweisen kann (optimal für die 

Zellbiologie). 

Durch die Schüttelbewegung und eine aktive, direkte Temperierung der 

Hybridisierungskammer können bei Hybridisierungsexperimenten eine erhöhte 

Reproduzierbarkeit, eine erhöhte Signalintensität sowie ein niedrigeres 

Hindergrundrauschen erreicht werden. 

Spezifikationen: 

SBS-Format 

Objektträger: Länge 74,0-76,5 mm, Breite 25-26 mm, Höhe 0-15 mm 

Temperierbereich: Raumtemperatur bis 100°C 



LHC-4-S 

Hybridisierungssystem HC4-S (LHC-4 + Heating Block 

Thermostat HBT-100) 

file:///F|/Kisker/Kisker/deutsch/dna.htm (4 von 9) [08.12.2005 22:31:13] 

1 1.050,00


QI Hybridisierungssystem HC4plus 

Hybridisierungskammer LHC-4 in Kombination mit dem Thermostat ThermoSTAR 100 

Progammierbares Kühlen und Heizen im Temperaturbereich zwischen -5° und +100°C 

Hohe Genauigkeit der Hybridisierungsparameter über einen langen Zeitraum 

Multifunktionalität durch eine Vielzahl an Blöcken für Tubes, Mikrotiterplatten und Flaschen 


LHC-4P 

Hybridisierungssystem HC4-Plus (LHC-4 + Heating Block Thermostat HBT- 

100) 

1 1.350,00 

LHC-TS ThermoSTAR 100 1 990,00 

LHC-40K Block für 40 Tubes á 0,5ml 1 150,00 

LHC-MTP Block für 96-well Mikrotiterplatte 1 200,00 

QI Hybridisierungssystem HC4professional 

Hybridisierungskammer LHC-4 in Kombination mit dem Schüttler ThermoTWISTER comfort 

Progammierbares Kühlen und Heizen im Temperaturbereich zwischen -5° und +100°C 

Progammierbare Schüttelfrequenzen von 200 - 1.000 rpm, 2 mm Amplitude 

Erhöhte Signalintensitäten, verbesserte Signal-Rauschverhältnisse mit höherer Reprodizierbarkeit 

Multifunktionalität durch eine Vielzahl an Blöcken für Tubes, Mikrotiterplatten und Flaschen 


LHC-4C 

Hybridisierungssystem HC4-Professional (LHC-4 + ThermoTWISTER 

comfort) 

1 2.100,00 

LHC-TT ThermoTWISTERcomfort 1 1.800,00 


LHC-384 Block für 384-well Mikrotiterplatte 1 200,00 

UV - Transilluminatoren 

homogene Ausleuchtung durch 8 bzw. 12 

Röhren (je nach Version), geringere 

Röhrenalterung durch integriertes Kühlgebläse, 

verbesserte Starteigenschaften und längere 

Lebensdauer der Röhren durch elektronische 

Ansteuerrung, Version mit stufenlos regelbarer 

Intensität der Röhren (10-100%), UV- 

Schutzschild (optional), Stellung des UV- 

Schildes ist im Winkel von 0-90° arretierbar, 

hochqualitative Konstruktion im kompakten 

Design, leichte Umrüstung auf andere 

Wellenlängen bzw. Applikationen, Die 

aufgelisteten UV - Transilluminatoren sind unter 

anderem zum Anregen der folgenden 

Farbstoffe geeignet: 

Ausführung 254 nm Hoechst Blue, Radiant Red, Chemiefluoreszenz 

Ausführung 312 nm Ethidiumbromid, SYBR Orange, Fluorescein,Texas Red, SYBR Red 

Ausführung 365 nm SYBR Green, GFP, CHO, Hoechst 33258,Fluorescamine, EBFP 



Ausführung Blaulicht 

Gel Star, SYBR Green, SBBR Gold, AttoPhos,PicoGreen, NBD, Acridine 

Orange, EGFP 

Ausführung Weisslicht Coomassie Blue, Silver Stain, Film Imaging 

Zubehör: UV-Schutzabdeckung, Ersatzröhren und Ersatzfiltergläser, UV-Schutzbrille,Transverterplatte (wandelt UV-Licht in 

Weißlicht) 

Transilluminatoren 

Kat# Wellenlänge nm 

Anzahl Röhren x 

Watt 

Filtergrösse cm Intensitäts-regelung Euro 

UVT-20S 254 8 x 8 20x20 nein 755,00 

UVT-20M 312 8 x 8 20x20 nein 755,00 

UVT-20L 365 8 x 8 20x20 nein 755,00 

UVT-30S 254 12 x 8 23x30 nein 955,00 

UVT-30M 312 12 x 8 23x30 nein 955,00 

UVT-30L 365 12 x 8 23x30 nein 955,00 

UVT-40S 254 6 x 15 20x40 nein 1.295,00 

UVT-40M 312 6 x 15 20x40 nein 1.295,00 

UVT-40L 365 6 x 15 20x40 nein 1.295,00 

UVT-20S-V 254 8 x 8 20x20 10-100% 945,00 

UVT-20M-V 312 8 x 8 20x20 10-100% 945,00 

UVT-20L-V 365 8 x 8 20x20 10-100% 945,00 

UVT-30S-V 254 12 x 8 23x30 10-100% 1.155,00 

UVT-30M-V 312 12 x 8 23x30 10-100% 1.155,00 

UVT-30L-V 365 12 x 8 23x30 10-100% 1.155,00 

UVT-40S-V 254 6 x 15 20x40 10-100% 1.495,00 

UVT-40M-V 312 6 x 15 20x40 10-100% 1.495,00 

UVT-40L-V 365 6 x 15 20x40 10-100% 1.495,00 

UVT-20S/M 254/312 4 x 8 / 4 x 8 20x20 nein 865,00 

UVT-20S/L 254/365 4 x 8 / 4 x 8 20x20 nein 865,00 

UVT-20M/L 312/365 4 x 8 / 4 x 8 20x20 nein 865,00 

UVT-30S/M 254/312 6 x 8 / 6 x 8 23x30 nein 1.095,00 

UVT-30S/L 254/365 6 x 8 / 6 x 8 23x30 nein 1.095,00 

UVT-30M/L 312/365 6 x 8 / 6 x 8 23x30 nein 1.095,00 

UVT-40S/M 254/312 3x15 / 3 x15 20x40 nein 1.480,00 

UVT-40S/L 254/365 3x15 / 3 x15 20x40 nein 1.480,00 

UVT-40M/L 312/365 3x15 / 3 x15 20x40 nein 1.480,00 

WL-20 Weißlicht 8 x 8 20x20 nein 495,00 


BLT-20 Blaulicht 8 x 8 20x20 nein 595,00 


Zubehör 

Kat# Bezeichnung Euro 

UVT-UVS UV-Schutzschild 37,50 



UVB-mB UV-Brille mit Bügel 29,00 

UVB-mG UV-Brille mit Gummiband 29,95 

UV-VG UV-Vollgesichtsschutz 67,90 

UV-Handlampen 

Mit dieser Produktlinie bieten wir UV-Handlampen in verschieden Wellenlängen und 

Strahlungsintensitäten an. Die Lampen zeichnen sich durch ein anwenderfreundliches 

Design und Zuverlässigkeit aus. 

Ein besonders kostengünstiges Produkt sind die auf zwei Wellenlängen umschaltbare UV- 

Lampen. 

Entsprechend Ihrer Wellenlängen werden die UV-Lampen u. a. in folgenden 

Anwendungsgebieten eingesetzt 

254 nm: Bestrahlung von PCR-Arbeitsplätzen, Fluorochemie, Pestizidanalyse, 

Mutationsstudien, Mykologie,Toxikologie, Mineralogie, Polymerisation 

Die Hochenergielampe UVL-100 wird mit separatem Netzteil geliefert und wird insbesondere 

für Mutagenesestudien und Polymersiationen eingestzt. 

312 nm: DNA und RNA-Elektrophoresetechniken, Erkennung von Banden im Gel. 

365 nm: Pilzkultivierung, Bakterienidentifikation, Fluorochemie, Pestizidanalyse, 

Qualitätskontrolle, Lebensmittelkontaminationen, Archeologie und Mineralogie. 

Der Preis für die 6 und 1 x 15 Watt-Lampen beinhaltet eine zweckmässige Standhalterung. 


Anzahl Röhren 

Abmessungen 

x Watt 

µW/CM Euro 

UVL-6LS 365/254 2 x 6 276 x 85 x 60 cm 610/400 357,00 

UVT-6LM 365/312 2 x 6 276 x 85 x 60 cm 610/580 357,00 

UVT-6MS 312/254 2 x 6 276 x 85 x 60 cm 580/400 357,00 

UVL-115S 254 1 x 15 505 x 140 x 117 cm 1.780 490,00 

UVL-115M 312 1 x 15 505 x 140 x 117 cm 3.000 490,00 

UVL-115L 365 1 x 15 505 x 140 x 117 cm 2.300 395,00 

UVL-215S 254 2 x 15 505 x 140 x 117 cm 1.780 675,00 

UVL-215M 312 2 x 15 505 x 140 x 117 cm 3.000 675,00 

UVL-215L 365 2 x 15 505 x 140 x 117 cm 2.300 429,00 

UVL-215LS 365/254 2 x 15 505 x 140 x 117 cm 1.350/930 675,00 

UVL-215LM 365/312 2 x 15 505 x 140 x 117 cm 1.350/1.800 675,00 

UVL-215MS 312/254 2 x 15 505 x 140 x 117 cm 1.800/930 469,00 

UVL-100 254 1 x 100 404 x 98 x 197 3.400 945,00 

Hybridisierungsofen 

Auf Grund der hohen Sicherheitserfordernisse und der notwendigen 

Reproduzierbarkeit der Hybridisierungsergebnisse ersetzen Hybridisierungsöfen 

immer öfter die bislang favorisierten Wasserbäder und Plastikbeutel. Die 

Hybridisierung läuft im Ofen unter kontrollierten Bedingungen bei konstanter 

Temperatur und Rotation bei gleichmäßiger Benetzung der Membran ab. Der 

kompakte Hybridisierungsofen wird mit Auffangwanne geliefert und bietet eine 

große Kapazität für 6 x 300mm oder 12 x 150mm Flaschen. Die Zieltemperatur von 

65°C wird in nur 7 Minuten erreicht, wobei das einzigartige Ventilatorsystem für 

gleichmäßige Luft- und Temperaturverteilung sorgt. Das Mikroprozessor gesteuerte 

Gerät kann ohne Rotator auch als Inkubator genutzt werden. Die 

Hybridisierungsflaschen sind aus Borsilikatglas mit blauer Schott-Verschlußkappe 

und Dichtung. 

Rotationsgeschwindigkeit 5 r.p.m 



Temperaturbereich 5°C über Raumtemperatur bis 90°C 

Heizleistung 400 Watt 

Heizgeschwindigkeit 65°C in 7 Minuten 

Temperaturpräzision +/- 0,2°C 

Temperaturanzeige 3-stellige LED-Anzeige 

Zeitschaltung 9 h, 59 min. oder Dauerbetrieb 

Überhitzungsschutz automatisch bei 3°C über Einstellwert 

Abmessungen: innen 350 x 195 x 200mm BxHxT 

Außen 425 x 380 x 250mm BxHxT 

Gewicht 15 Kg 

Kat. # Bezeichnung Euro 

L017 Hybridisierungsofen 1.598,00 

L017-F3 Rotisserie f. 3 Flaschen 300 x 70mm 249,80 

L017-F6 Rotisserie f. 6 Flaschen 300 x 50mm 249,80 

L017-F6/12 Roti. f. 6 Fl. 300x35 oder 12Fl 150x35mm 249,80 

L017-SP Schüttelplattform 249,80 

L017-1535 Flasche 150 x 35mm 34,90 

L017-3035 Flasche 300 x 35mm 49,90 

L017-3050 Flasche 300 x 50mm 64,90 

L017-3070 Flasche 300 x 70mm 74,90 

Hybridisierungswasserbad Kombi für die Molekularbiologie 

Diese Kombination aus Wasserbad und 3-D Schüttler bietet vielfältige Anwendungsmöglichkeiten in der 

Molekularbiologie, wie Hybridisieren und Waschen, Kühlen und Konservieren von Schmelzagar, 

Denaturierungen etc.Das Mikroprozessor gesteuerte Bad hat einen Heizbereich von 5°C über RT bis 

100°C, die Badöffnung ist 270 x 245 mm, die Badtiefe 50mm. Das Gerät wiegt 5,5kg. Aussenmaße: 

300x300x200mm. Das Wasserbad ist auf einem 3-D Schüttler mit variabler Geschwindigkeit von 10-100 

r.p.m. platziert. 

Kat. # Bezeichnung Preis Euro 

L0048 Hybridisierungwasserbad Kombi 1.459,00 

L0049 Hybridisierungwasserbad 475,00 

L050 3D-Taumelschüttler, 10 kg Tragkraft 995,00 

Gel-Dokumentationssysten GelSystem Flexi 

Das GelSystem Flexi ist ein PC-gesteuertes Gel-Dokumentationssystem, das auf einer 

Digitalkamera basiert. Es ist sehr bedienerfreundlich und nutzt alle Vorzüge einer Digital- 

Kamera u.a. hohe Bildauflösung., Bildqualität und Steuerung über PC. Es stehen 

wahlweise 2 Olympus-Kameras zur Verfügung, die sich in ihrer Auflösung und 

Empfindlichkeit unterscheiden. Die Steuerung der Kameras erfolgt über die PC- 

Software ImagingControl X1. Neben der Kamerasteuerung beinhaltet die 

ImagingControl X1 auch viele Funktionen für die Bildbearbeitung. Zur Verwaltung 

großer Datenmengen nutzt die Software eine integrierte Datenbank. Das System 

beinhaltet neben der transportabelen Aufsatzdunkelhaube auch einen UV- 

Transilluminator sowie einen Thermodrucker P-91W. Der Drucker benötigt ca. 20 

Sekunden für den Ausdruck eines Bildes. Das Gelsystem ist optional erweiterbar. 



Technische Daten: 

Kamera Olympus C-4000 Olympus C-750 

Pixel 2288 x 1712 2288 x 1712 

Zoomobjektiv Motor-Zoom F 2,8-11 Motor-Zoom F 2,8-8 

Filter 1 Filter nach Wahl (EtBr, SYBRGreen,) 1 Filter nach Wahl (EtBr, SYBRGreen,) 

Graustufen 8 Bit (256) 8 Bit (256) 

Farben 24 Bit (16,7E6) 24 Bit (16,7E6) 

Max. Integrationszeit 16 s 16 s 

Steuerung/Speicherung PC-Interface (USB) PC-Interface (USB) 

Bestelldaten 

Kat#: Beschreibung Euro 

Flexi-4000 System Flexi 4000 auf Anfrage 


Seitenanfang 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

The DNA-Workstation is an UV sterilisation cabinett to decontaminate reagents and 

equipment prior to carrying out PCR reactions. The powerful 15 watt UV light (254 nm) of 

the DNA-Workstation denatures nucleic acids in 5-30 minutes making them unsuitable for 

amplification and therefore eliminating any possible cross contamination. The DNA- 

Workstations are equipped with a white lamp for illumination. The 10 mm acrylic walls or 8 - 

10 mm glas walls also acts as an efficient shield of beta-radioactive emissions. The 

dimensions of the DNA-Workstation are 69 x 51 x 57 cm w x d x h, the weight is 25 kg.The 

DNA-Workstations stand on an easy to clean stainless steel tray. 


L020: acryl sides, 2 x 254 nm UV-lamps, 1 x white light, lower part front to turn up 

L020C: acryl side walls, 1 x 254 nm UV-lamp, 1 x white light lamp and 1 x 254 nm UV/Air 

cleaner, which circulates the air along the UV-lamp for continues denaturation, lower part 

front to turn up. 

L020S: acryl side sides, 2 x 254 nm UV-lamps, 1 x white light, two side openings from the 

front side 

L020-G: glas sides, which are resistant to UV-cracking and can be cleaned with the medium 

of choice, 2 x 254 nm UV-lamps, 1 x white light, lower part front to turn up 

L020-GC: glas sides, which are resistant to UV-cracking and can be cleaned with the 

medium of choice, equipped with 1 x 254 UV-lamp, 1 white light lamp and 1 x 254nm UV/Air 

cleaner. 

Cat. # Description power Euro 



& DNA 

Measurement 



L020 DNA-Workstation, acryl 220Volt/50Hz 1.299,00 

L020-C Workstation, Acryl with UV/Air-Cleaner 220Volt/50Hz 1.459,00 

L020-S Workstation, Acryl with Side-Openings 220Volt/50Hz 1.499,00 


L020-GC Workstation, Glas with UV/Air Cleaner 220Volt/50Hz 1.750,00 

UV-Cleaner, the new combination of Laminar Flow and UV-light for Clean Rooms 

file:///F|/Kisker/Kisker/dna.htm (1 von 9) [08.12.2005 22:31:15] 

Microparticles


This new products provides DNA safe laboratories without direct UV-light. The air is constantly flowing through 

the instrument, which is equipped with a fan, an UV-lamp and a dust filter. Inside the box the density of the UVlight 

is increased 1000 fold, sufficient to inactivate DNA complete. Also microbiological contaminations are 

reduced strongly. 

The UV-Laminar-Flow is able to clean 25 m3 of air/ hour to provide DNA free laboratory of 25 m2 within 3 hours. 

Furter advantages: 

no hepa filters to change 

ozon free high density UV contamination 




The instrument is recommended for clean room laboratories as PCR, DNA-Analysis, Microbiology, Virology, 

Tissue Culture or other rooms, where a contamination free area is needed. After 12 hours of air cleaning, the 

UV-Laminar Flow provides an estimated reduction of the colony forming unit to 80 - 100 CFU/m3 air 

L046-S weight: 2,1kg, power 220/240 V0lt, 50/60Hz 30 Watt 

L046-M weight: 3,7kg power 220/240 V0lt, 50/60Hz 30 Watt. 

Cat. # description Capacity/hr Euro 

L046-M UV-Cleaner small 25m3 399,00 


This DNA-Workstation avoids cross-contamination by suction of the air and 

ductingit through an activated charcoal filter. All particles are captured and will 

not reach normal lab air. 

The DNA-Workstation is equipped with an 4W- 254 nm UV-lamp and 

filtercassett. The hour counter shows the overall working time. The activated 

charcoal filter should be replaced every 1000 working hours. The work surface 

is made from stainless steal and easy to clean. The airflow is adjustable from 0 

- 100%. The DNA-Workstation is available in 3 versions. The perspex cover 

can be moved 100mm backwards (exept USA version). 

Specification: electr. power: 220Volt/50Hz/80Watt 

dimension working space: 470 x 300mm (W x D) 


Exterior Standard: 485 x 540 x 250mm (W x D x H) 

Sydney-Version: 485 x 540 x 465mm (W x D x H) 

USA-Version : 485 x 540 x 600mm (W x D x H) 





L016-AF act.charcoal filter 40,90 

L016- UV UV-lamp 45,00 


file:///F|/Kisker/Kisker/dna.htm (2 von 9) [08.12.2005 22:31:15]


BIO-LINK 254 nm provides a fast and reliable method, to fix DNA or RNA onto nylon- or 

nitrocellulose membranes. The crosslinking requires only a few seconds for a stable fixation 

between DNA/RNA and the membran. This method avoids a loss of samples through later 

hybridisation. The signal intensity is manifold increased (5 - 10 times) compared to the 

traditional and time consuming baking method (two hours at 80°C ). The BIO-LINK is 

equipped with five tubes of 8 Watt and also available in 312 nm and 365 nm. The big volume 

chamber ( 14,5 x 33,0 x 26 cm HxDxW) offers space for bigger tubes and plates. 

UV-Energy supply can be stted precise. BIO-LINK is equipped with an UV energy 

programming system with a time integrator, which constantly monitors the UV-light emission. 

further technical details: 


max UV-exposition in two ranges:0 - 9,999 joules and 0-99,99 joules 





dimensions:30,5 x 36 x 35 cm (HxDxW), weight 10,5 kg 

in addition to the crosslinking of nucleic acids BIO-LINK can be used for: 


partial restriction endonuclease digestion by formation of thymine dimers 




BLX-254 BIO-LINK 254 nm 1.075,00 

BLX-312 BIO-LINK 312 nm 1.075,00 

BLX-365 BIO-LINK 365 nm 1.075,00 


Membrane of 100% pure nitrocellulose for transfer of proteins and nucleic acids. It shows high 

binding capacity (80 - 100 µg / cm2) and a low background. Pore size 0,45 µm is used for 

standard applications. The 0,2 µm pore size is recommended for transfer of low molecular 

weight proteins (< 20 kDa) and nucleic acids to avoid loss of sample during transfer. 

Cat. # Description Packsize Euro 

MNC-0.2 Nitrocellulose-Membran 0,2µ 33 x 300 cm 1 Roll 169,00 

MNC-0.4 Nitrocellulose-Membran 0,45µ 33 x 300 cm 1 Roll 169,00 

MBP-0.17 Blotting-Paper 0,17 mm 46 x 57 cm 100 sheets 99,00 

MNC-0.34 Blotting-Paper 0,34 mm 46 x 57 cm 100 sheets 149,00 

DiscoverSlip for 45 µl sample volume only 

Premium Cover Slip for standard slides 75 x 25 mm 

40 x 20 mm reaction-chamber with 45 µl reaction-volume 

self sealing - no use of glues 

simple and fast positioning on the slide 

simple remove after the reaction - no break of the cover slip 

production of a homogenous fluid-film on the slide without bubbles 

economic - up to 10 times reusable 

ideal for microarray hybridisations and cell-applications ( in situ hybridisation, 

immunohistochemistry) 




GK300 DiscoverSlip set of 4 slips 48,00 

GK130 

PALMhyb 

PALMhyb (Processing system for discover 

slips) 

1 System 950,00 

Processing system for the use of DiscoverSlips 

accepts up to 4 slides or microarrays 

outside dimensions in SBS-microtestplates-format 

ideal in combination with ThermoSTAR 100 and ThermoTWISTER comfort, description see 

chapters below. 



GK140 PALMhyb plus (PALMhyb + ThermoSTAR 100 1 System 1.950,00 

GK145 PALMhyb plus (PALMhyb + ThermoTWISTER comfort) 1 System 2.800,00 

QI Incubation and Hybridization Chamber 

The LHC-1 Hybridization-, Immobilization- and Incubation chamber is an universal tool for 

applications in molecular and cell biology. The inside microplate format allows processing 

(with adapter) on microarrays, slides or three microplates. The chamber is designed for 

biochemical reactions DNA, protein and microarrays. LHC-1 can be used with common 

microtest-plate shakers. It tolerates external temperatures of 120°C. 

Further Features: 

parallel processing of 12 microarrays or slides or 3 microplates 

easy to open magnetic mechanism, opening direct after heating possible 

strong magnetic feet for safe standing 

nontransparent lid for to process light sensitive reactions 

made of chemical resistant materiales 

compatible to &Quot;Geneframes&Quot;, &Quot;LifterSlips&Quot; and 

&Quot;Hybriwells&Quot; 

Specificationes: outer dimensions 140x103x53 mm, inside confirming ANSI/SBS 1-2004 

Format 

slide dimensions:supports multiple platforms (1&Quot; - 3&Quot;), length 74-77 mm, width 

25,0-25,5 mm, hight 0,7-2,0 mm 


LHC-1 Incubatiochamber 1 390,00 

LHC-1/AO Adapter for 4 Objektträger 3 120,00 

LHC-1-S Incubation system LHC-1-S (HC1 + Variomag Teleshake) 1 1.385,00 

QI Hybridization Chamber 



The hybridization chamber LHC-4 is an exchangeable thermoblock for microarrays with 1 up 

to 4 slides.It is designed for biochemical reactions with DNA, protein and cell slides or 

microarrays and can be used with a commercial thermomixer or heater. An easy magnetic 

clamp mechanism for fixing the slides provides a high level of spatial and temporal 

temperature stability during hybridization. The slide thickness is changeable between 0,7 to 

2,0 mm, whereas the height slide body is changeable up to 15 mm (optimized for 

cellbiology). Shaking and direct, active heating of the hybridization chamber lead to an 

increased signal intensity and an improved signal-to-background ratio with very good 

reproducibility. 

further features: 

ANSI/SBS 1-2004 format 

compatible to "Geneframes", "LifterSlips" and "Hybriwells" 

water reservoir pads provide high humidity and prevent samples from drying out 



made of chemical resistant materiales. 

slide dimensions:supports multiple platforms (1" - 3"), length 74,0-76,5 mm, width 25-26 

mm, hight 0-15 mm 

Temperature range ambient: 100°C max. 


LHC-4 Hybridization chamber 1 450,00 

LHC-4-S 

QI Hybridization System HC4plus 

Hybridization system HC4-S (LHC-4 + Heating Block 


Hybridization chamber LHC-4 in combination with Thermostat ThermoSTAR 100 

Progammable cooling and heating in temperature range from -5° to +100°C 

High accuracy of the hybridization-parameter through long time 

Multifunctionality through a number of blocks available for tubes, microtestplates and bottles 

1 1.050,00 


LHC-4P Hybridization system HC4-Plus (LHC-4 + Heating Block Thermostat HBT-100) 1 1.350,00 


LHC-40K Block for 40 tubes á 0,5ml 1 150,00 

LHC-MTP Block for 96-well microtestplate 1 200,00 

QI Hybridization System HC4professional 

Hybridization chamber LHC-4 in combination with shaker ThermoTWISTER comfort 

Progammable cooling and heating in temperature range from -5° to +100°C 

progammable shaking speed from 200 - 1.000 rpm, 2 mm amplitude 

higher signal intensities, improved signal-noise relationships with higher reproducibility 

multifunctionality by a number of blocks available for tubes, microtestplates and bottles 


LHC-4C Hybridization system HC4-Professional (LHC-4 + ThermoTWISTER comfort) 1 2.100,00 


LHC-30K Block for 30 Tubes á 1,5ml 1 150,00 



LHC-384 Block for 384-well Microtestplate 1 200,00 

UV - Transilluminators 

homogenus lightning by 8 or. 12 Tubes 

(depending on model), long tube 

shelflife through integrated cooling fun, 

electronical start, models with stepless 

choosable intensity of the tubes (70- 

100%), UV-protection shield (optional) 

usable angel 0-90°, high quality 

construction in compact design, 

The listed Illuminators are useful for 

following dyes: 

254 nm Hoechst Blue, Radiant Red, Chemiefluoreszenz 

312 nm Ethidiumbromid, SYBR Orange, Fluorescein,Texas Red, SYBR Red 

365 nm SYBR Green, GFP, CHO, Hoechst 33258,Fluorescamine, EBFP 

Bluelight Gel Star, SYBR Green, SBBR Gold, AttoPhos,PicoGreen, NBD, Acridine Orange, EGFP 

Whitelight Coomassie Blue, Silver Stain, Film Imaging 

accessories: UV-protection shield, replacement tubes and glases, UV-protection glas and face shield 

Transilluminators 

Cat.# wavelenght number tubes x Watt filter size intensity control Euro 

UVT-20S 254 8 x 8 20x20 no 755,00 

UVT-20M 312 8 x 8 20x20 no 755,00 

UVT-20L 365 8 x 8 20x20 no 755,00 

UVT-30S 254 12 x 8 23x30 no 955,00 

UVT-30M 312 12 x 8 23x30 no 955,00 

UVT-30L 365 12 x 8 23x30 no 955,00 

UVT-40S 254 6 x 15 20x40 no 1.295,00 

UVT-40M 312 6 x 15 20x40 no 1.295,00 

UVT-40L 365 6 x 15 20x40 no 1.295,00 

UVT-20S-V 254 8 x 8 20x20 10-100% 945,00 

UVT-20M-V 312 8 x 8 20x20 10-100% 945,00 

UVT-20L-V 365 8 x 8 20x20 10-100% 945,00 

UVT-30S-V 254 12 x 8 23x30 10-100% 1.155,00 

UVT-30M-V 312 12 x 8 23x30 10-100% 1.155,00 

UVT-30L-V 365 12 x 8 23x30 10-100% 1.155,00 

UVT-40S-V 254 6 x 15 20x40 10-100% 1.495,00 

UVT-40M-V 312 6 x 15 20x40 10-100% 1.495,00 

UVT-40L-V 365 6 x 15 20x40 10-100% 1.495,00 

UVT-20S/M 254/312 4 x 8 / 4 x 8 20x20 no 865,00 

UVT-20S/L 254/365 4 x 8 / 4 x 8 20x20 no 865,00 

UVT-20M/L 312/365 4 x 8 / 4 x 8 20x20 no 865,00 

UVT-30S/M 254/312 6 x 8 / 6 x 8 23x30 no 1.095,00 

UVT-30S/L 254/365 6 x 8 / 6 x 8 23x30 no 1.095,00 

UVT-30M/L 312/365 6 x 8 / 6 x 8 23x30 no 1.095,00 



UVT-40S/M 254/312 3x15 / 3 x15 20x40 no 1.480,00 

UVT-40S/L 254/365 3x15 / 3 x15 20x40 no 1.480,00 

UVT-40M/L 312/365 3x15 / 3 x15 20x40 no 1.480,00 

WL-20 White light 8 x 8 20x20 no 495,00 


BLT-20 Blue light 8 x 8 20x20 no 595,00 


accessories 

Cat.# Description Euro 

UVT-UVS UV-protectionshield 37,50 

UVB-mB UV-glas with ear piece 29,00 

UVB-mG UV-glas with rubber band 29,95 

UV-VG UV-face shield 67,90 

UV-Lamps 

We offer with this productline UV-lamps in different wavelengths. The well designed lamps 

are easy to handle and reliable. 

A special cost efective product are the lamps in combination of two different wavelengths. 

UV-lamps are recommended to use according to the wavelengths in following application 

areas 

254 nm: Elimination of PCR-contaminations, fluorochemistry, pesticide analysis, mutation 

studies, mykology,toxikology, mineralogy, polymer curing and control in industry 

The high intensity lamp UVL-100 is supplied with a separate power supply and is especialy 

used for mutation studies and polymer curing. 

312 nm: DNA and RNA-electrophoresis, recognition of lanes in the gel. 

365 nm: cultivation of fungi, identification of bacteria, fluorochemistry, pesticide analysis, 

quality controle, food contamination, archeology and mineralogy. 

The price for 6 Watt und 1 x 15 Watt-Lamps includes a stand for the lamps. 

Cat# Wavelength 

Number of Tubes x 

Watt 

Dimensionen BxTxH µW/CM Euro 

UVL-6LS 365/254 2 x 6 276 x 85 x 60 cm 610/400 357,00 

UVT-6LM 365/312 2 x 6 276 x 85 x 60 cm 610/580 357,00 

UVT-6MS 312/254 2 x 6 276 x 85 x 60 cm 580/400 357,00 

UVL-115S 254 1 x 15 505 x 140 x 117 cm 1.780 490,00 

UVL-115M 312 1 x 15 505 x 140 x 117 cm 3.000 490,00 

UVL-115L 365 1 x 15 505 x 140 x 117 cm 2.300 395,00 

UVL-215S 254 2 x 15 505 x 140 x 117 cm 1.780 675,00 

UVL-215M 312 2 x 15 505 x 140 x 117 cm 3.000 675,00 

UVL-215L 365 2 x 15 505 x 140 x 117 cm 2.300 469,00 

UVL-215LS 365/254 2 x 15 505 x 140 x 117 cm 1.350/930 675,00 

UVL-215LM 365/312 2 x 15 505 x 140 x 117 cm 1.350/1.800 675,00 

UVL-215MS 312/254 2 x 15 505 x 140 x 117 cm 1.800/930 469,00 

UVL-100 254 1 x 100 404 x 98 x 97 3.400 945,00 



Hybridisation ofen 

Hybridisation ovens are fast becoming the preferred method of hybridization 

technique in today´s laboratory. The ovens have virtually replaced plastic bags and 

shaking water baths because of the added safety and convenience they provide. 

Incubations take place inside the ovens under constant rotation, thereby providing 

even distribution of probe solution over the membrane. Our hybridisation oven 

offers high performance with precise temperature control. The narrow frontal profile 

provides the additional advantage of conserving precious benchtop space. 

The hybridisation ofen offers exeptionally high performance. You dońt have to wait 

longer twenty to forty minutes to reach target temperatures. The hybridisation ofen 

heats from ambient to 65°C in only 7 minutes. Our unique fan-assisted airflow 

system circulates air evenly and continously, delivering excellent temperature 

uniformity throughout the oven chamber. The digital set/digital read P.I.D. 

microprocessor temperature controller maximizes rapid heat-up of the oven. An 

over temperature safety (OTP) is automatically set by the microprocessor at 3.0°C 

obove setpoint. In the unlikely event of a microprocessor failure, a thermal cutoff will 

shut off the power to the heating elements. 


Rotator-capacity 

6 x 300 x 35mm or 12 x 150 x 

35mm tubes 

or 6 x 300 x 50mm 

or 3 x 300 x 70mm 

or Shaker function Rocking platform 

Rotating speed 5 r.p.m. at 220Volt 

Temperature range ambient +5°C up to 90°C 

Heating power 400 Watt 

Heating speed 65°C in 7 minutes 

Temperature precision +/- 0,2°C 

Temperatuer display 3-point LED-display 

Timer 9 h, 59 min. or continously 

OTP automatic at 3°C over set point 

Dimensions: inside 350 x 195 x 200mm w x h x d 

outside 425 x 380 x 250mm w x h x d 

weight 15 Kg 

Cat. # description Euro 

L017 Hybridisation ofen 1.598,00 

L017-F3 rotisserie f. 3 tubes 300 x 70mm 249,80 

L017-F6 rotisserie f. 6 tubes 300 x 50mm 249,80 

L017-F6/12 

rotisserie f. 6 tubes 300 x 35mm 

or f.12 tubes 150 x 35mm 

249,80 

L017-SP rocking platform 249,80 

L017-1535 tube 150 x 35mm 34,90 

L017-3035 tube 300 x 35mm 49,90 

L017-3050 tube 300 x 50mm 64,90 

L017-3070 tube 300 x 70mm 74,90 

Hybridisation/Waterbath Combi for Molecularbiology 



This combination waterbath and 3-D shaker offers many applications in molecularbiology, like 

hybridisations, washes, cooling and maintaining of melted agar, denaturations etc. The microprocessor 

controlled bath has a temperature range from 5°C over ambient to 100°C, the bath opening is 270 x 245 

mm, the bathdepth 50mm. 

the weight is 5,5kg, dimensions are: 300x300x200mm. 

The waterbath is placed on a 3-D shaker with variable speed of 10-100 r.p.m. 


L0048 Hybridisationwaterbath Combi 1.459,00 

L0049 Hybridisationwaterbath 475,00 

L050 3D-shaker, 10 kg loading capacity 995,00 

file:///F|/Kisker/Kisker/dna.htm (9 von 9) [08.12.2005 22:31:15] 

Top of Page

Primus evolution Thermocycler - PCR technology made in Germany 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



Horizontal Gel Tanks 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Our Horizontal-Electrophoresis tanks are worldwide established submarine electrophoresis tanks. 

They are featuring robustness and high quality. Gel tanks, lids and trays are made from acryl, 

resistant against cracking by filling hot agarose. Rubber feet garantee a safe stand. 

A big range of high quality combs garantees excellent results and reproducability, platin electrodes 

and stabel connections garant a reliable electrical field during the run. Corrosion free connections, 

electrode leads and leading the platin-electrodes over the full width of tank avoid effects as "Smiling". 

Gels of Minigel can be casted userfriendly either in gel casting systems or direct in the tank by a 90° 

turn of the gel tray. Midigels can be casted in the casting system. No need for casting tapes any 

more. 

All gel trays have several slots for the combs, to run shorter gels with higher sample quantity. The 

trays are UV-transparent, therefor the gels can be photographed on the tray/transilluminator without 

the risk of damaging the gels. Minigel "View" with UV-transparent bottom is very useful for isolation of 

DNA-fragmentes from "Low-melt-Agaroses". 

The whole tank can be placed during the run on a transilluminator, to view the progress of the 

separation for "Low-melt-Agarosen". 

The saftey concept protects the user. A contact of any parts/buffer under voltage is not possible with 

exeption of the microgel tank, which works in the harmless low voltage area under 40Volt. 

Microgel with Power supply: Gel size 5 x 6 cm (W x L) 

Eine kleine Kammer für schnelle Auftrennung von Nukleinsäuren und Restriktionsfragmenten im 

Agarosegel. Diese Kammer wird mit einem Niederstrom-Netzteil geliefert und ist besonders für 

Praktika geeignet. Die Microgelkammer ist aus einem Stück produziert und daher unverwüstlich., die 

Laufzeit beträgt circa 30 – 45 Minuten. 

Puffervolumen 150ml 

maximale Probenzahl 10 

UV-transparenter Boden 

Laufstrecke 4,3cm 

Außenmaße der Kammer: 9 x 11 x 2,2cm (BxLxH) 

Lieferumfang: Microgel-Kammer mit Platinelektroden, UV-Träger, Netzteil, 1 Kamm 2,0mm - 5 Zähne 



& DNA 

Measurement 



Cat. # Description sample size, 4mm well Euro 

EHO-7 Microgel with Power supply 270,00 

EHO-7-5 Comb 2,0 mm - 5 teeth 24µl 29,00 


Gel casting systems 

Gel casting systems are used for the preparation of several gels. UVtransparente 

gel trays fit exactly into the gel casting stands, which enables the 

user to cast gels without taping. 

The gel casting stand E-VG is made from aluminium and causes fast heat 

diversion of hot agarose. This casting systems can be used for Mini- and 

Midigels. 

file:///F|/Kisker/Kisker/thermal.htm (1 von 8) [08.12.2005 22:31:17] 

Microparticles


Cat. # Description fitting to Euro 

E-VG variable gel casting system Mini- u. Midigels 295,00 

EHO-1-GS Casting system 3 Minigels 89,00 

EHO-2-GS Casting system 2 Midigels 89,00 

EHO-3-GS Casting system 2 Midigels B 89,00 

EHO-4-GS Casting system 1 Midigel MB 105,00 


A small tank for fast separation of nucleic acids and DNA fragments in agarose gels; 



Separation lenght with one Comb: 7 cm, two Combs: 3,5 cm 




Complete unit includes: Minigel-Tank with platin electrodes, UV-tray with seals, 2 combs of choice, 

levelling bubble, rubber feet 

Cat. # Description Sample size, 4mm well Euro 

EHO-1 Minigel, complete unit 279,00 









EHO-1-UVT UV-tranparent tray 7 x 8,3 cm 79,00 

EHO-1-GS-D 2 silicone seals for UV-tray 14,00 

EHO-1-GS Casting system for 3 Minigels 89,00 

EHO-NP levelling platform 99,00 

EHO-L levelling bubble 12,00 


Tank for analytic and preparative experiments, PCR-screening and RFLP 



Separation lenght with one Comb: 12,6 cm, two Combs: 6,3 cm 




Complete unit includes: Midigel-Tank with platin electrodes, UV-tray with seals, 2 combs of choice, 


Cat. # Description Sample size, 4mm well Euro 

EHO-2 Midigel, complete unit 369,00 





file:///F|/Kisker/Kisker/thermal.htm (2 von 8) [08.12.2005 22:31:17]














EHO-2-UVT UV-transparent tray 12 x 14 cm 89,00 

EHO-2-GS-D 2 silicon seals for tray 14,00 

EHO-2-GS Casting system for 2 Midigels 89,00 

Midigel B: gel size 14,5 x 10,2 cm (W x L) 

Wide Tank for separation of DNA/RNA-fragments, PCR-screening and RFLP 




Gel casting in gel casting system 

Unit dimension: 23,5 x 20,5 x 8,5 cm (B x L x H) 

Complete unit includes: Midigel-B-Tank with platin electrodes, UV-tray with seals, 2 combs of choice, 



EHO-3 Midigel B, complete unit 399,00 







EHO-3-UVT UV-transparent tray 14,5 x 10,2 cm 95,00 

EHO-3-GS Gel-casting-system for 2 trays 89,00 


EHO-NP Levelling plattform 99,00 


Midigel MB: gel size 23 x 16 cm (B x L 

Maxi-Wide Tank for separation of DNA/RNA-fragments, PCR-screening and RFLP 


Buffer volume 1.100 ml, gel volume 180ml (0,5 cm gel thickness) 


Gel casting direct in the gel casting system 


Complete unit includes: Midigel-MB-Tank with platin electrodes, UV-tray with seals, 2 combs of 

choice, levelling bubble, rubber feet. 




EHO-4 Midigel MB, complete unit 585,00 





EHO-4-UVT UV-tranparent tray 23 x 16 cm 89,00 


EHO-4-GS Gel casting system for one gel tray 105,00 



Maxigel: gel size 20 x 25 cm (W x L) 

Tank for DNA/RNA analysis and fast PCR-screening of samples 




Gel casting direct in UV-tray 

Unit dimension: 29,5 x 41,5 x 10 cm (B x L x H) 

Complete unit includes: Maxigel-Tank with platin electrodes, UV-tray with casting gates, 3 combs of 

choice, levelling bubble, rubber feet. 

Kat. # Description sample size, 4mm well Euro 

EHO-5 Maxigel, complete unit 575,00 










EHO-5-S casting gate 14,00 




Tank with UV-light transparent bottom, very useful for isolation of DNA-fragments from Low-meltingagaroses. 

This tank can be placed during the run on a transilluminator, to view the progress of the 

separation 







Complete unit includes: Minigel-Tank with platin electrodes, 2 combs of choice, levelling bubble, 

rubber feet. 




EHO-6 Minigel "View", complete unit 299,00 















Power Supplies Series 100 replaced by EV243 

The E100 mini power supplies are replaced now by the technical improved EV143 power supply to 

cover the ideal voltage range generally used with small electrophoresis units( mini horizontal and 

mini verticval). EV143 is space saving on the laboratory bench. It is produced to meet worldwide 

safety standards. None of the outlets is direcly wired to the earth for increased safety. Userfriendly 

design garants a fast and easy handling. Up to three electrophoresis chambers can run at same 

time. The user is protected against overload condition including accidental short circuit of the output. 

When voltage is available again, the power supply continous to run the electhrophoresis with 

preselected parameters. 

Specifikationes: 

outlets for 3 electrophorsis chambers 


Timer 

large LED-Display easy to read 

large knob for easy selection of voltage and current 

adaption of voltage during the run 


useful for horizontal and vertical minigeles 

Dimensions: 24 x 20 x 13 cm (WxDxH) , weight 3 kg 

Kat. #: Spannung V Stromstärke mA Leistung W Euro 

EV243 (E143) 400 250 50 459,00 


Power Supplies of Series 800 are powerful, prgrammabable units for all application areas according 

to their specification. They are produced with all safetey-standards as a selftest bei switching on and 

garant a fast and easy handling. Up to four electrophoresis units can be used at same time. The user 

is fully protected against overload and short circuits, when voltage/current is available again, the 

experiments continous according to the preseted parameters. All units with exeption of modell E844 

are equipped with a volt-hour-integrator 





all models can run with constant voltage, current or power, automatic cross-over 




Dimensions: 30 x 18 x 12 cm (BxTxH) , Weight E835/831/844/863/865/ 5 kg, E832 6 kg, 

E802/861/815/833/862 10 kg 

Cat. #: Voltage V Current mA Power W Euro 

EV231 (E835, E831) 300 1000 150 615,00 

EV202 (E802) 300 2000 300 845,00 

EV243 (E844) 400 300 50 459,00 

EV265 (E863,E865) 600 500 150 749,00 

EV261 (E861) 600 1000 300 875,00 

EV215 (E815) 1200 500 300 915,00 

EV232 (E832) 3000 150 150 945,00 

EV233 (E833) 3000 300 300 1.255,00 

EV262 (E862) 6000 150 300 1.490,00 

Application Technique Sequencing Horizontale/Vertikale Gel I E F Electro-Elution Semi-Dry a. Western Blotting 










Power Supplies 

Our Power Supplies have been designed according international and CE European standards. The 

power supplies are equipped with many user-friendly design features, which allows quick and simple 

opertion. EPS-305 und EPS 503 are equipped with a "Gelsaver", which helps, that the separation 

stays in line and the strands will not diffuse in the gel. 

Cat. # Voltage V Current mA Power W Euro 

EPS-304 300 400 120 459,00 

EPS-305 300 500 150 599,00 

EPS-503 500 300 150 630,00 

EPS-606 600 800 300 961,00 

EPS-1006 1000 600 300 1.090,00 

EPS-1006P 1000 600 300 1.390,00 

EPS-202 200 1998 300 1.030,00 

EPS-3002 3000 300 300 1.235,00 

EPS-9009TX 3000 300 300 1.490,00 

CombiCycler 



The CombiCycler with a block-combination for 0,2 and 0,5 ml PCR-tubes is a compact low cost Cycler, 

useful for laboratories with smaller sample quantities. 


flexibel sampelcapacity 25 x 0,2 ml tubes and 16 x 0,5 ml PCR-tubes 

Temperature range+ 4° - + 99 °C 

temperature range of the lid +50° bis +105 °C 

temperature increment 0,1 °C 

temperature precision 0,2 °C 

temperature uniformity through the block: uo to 95 °C ± 0,5 °C, up to 72 °C ± 0,3 °C, up to 65 °C ± 0,2 °C 

Temperature ramping speed ± 3 °C/sec 

100 Programm files: number of steps in the file:1 to 9 

number of steps in a cycle: 1 to 7 

number of cycle repeats: 0 to 99 

further speczificationes: 


weight 4,5 kg 

power supply 220/240 Volt 50/60 Hz 

Cat. # Description Capacity Euro 

LCC-41 CombiCycler inclusive Block 25 x 0,2 ml and 16 x 0,5 ml 2.150,00 

picture 1: PCR-products, separated in a agarose gel (0,8%, 12 x 6 cm, 0,5 x TAE). 

5 µl each of PCR-products were loaded. Lane 1-12: PCR-products (1-12) of the CombiCyclers, Lane 13: 

100 bp DNA Ladder Plus (MBI Fermentas), Lane 14-16: PCR-products (14-16) of an other reference 

thermocyclers (PCR-product 16 is the negative-controle, Lane 15 has a reduced volumen (10 µl instead 

20 µl. 

picture 2: Comparison of temperature ramping of CombiCyclers (red) with an other reference 

Thermocycler (black) 

Thermal Cycler von TECHNE 

We are proud to offer the reliable and established Cycler equipment made by TECHNE. TECHGENE TC- 

312 has been designed for the individual; priced to be inexpensive to be treated as an ordinary piece of 

laboratory equipment, that everybody can own.; designed to process a small number of parallel samples 

rapidly in unprecedented cycle times, allowing a typical 25 cycle programme to be completed in around 

one hour, enabling the operator to achieve more PCRs in a working day. 

The TECHGENE Thermal Cycler offers following advantages: 

a very small, fast and inexpensive Cycler 

nothing is extra-an amazing list of innovative features as standard and with user friendly software that 

can acommodate all the latest PCR protocols such as "Touchdown", "RAPD", and "Long PCR" 

excellent performance - 1,8°C cooling and 3,0°C heating per second in the 55°C to 90°C range 

temperature range from 4°C to 99°C 

heated lid for oil free PCR, heating temperature 100-115°C 

alert and cooloing at program end 

two models available for 25 x 0,2ml microtubes and 20 x 0,5ml microcentrifuge tubes 

loading of 80 programms with 99 cycles 


FTC3105D Techgen inclusive 20 x 0,5ml Block 20 x 0,5ml block 3.079,00 



FTC3102D Techgen inclusive 25 x 0,2ml Block 25 x 0,2ml block 3.079,00 

FTC31B02 20 x 0,5ml Block 1.065,00 

FTC31B2D 25 x 0,2ml Block 1.065,00 

Standard Cycler TC-412 from TECHNE 

TECHNE. TECHGENE TC-412 has been designed for a bigger number of parallel samples. 

The TECHGENE Standard Cycler TC-412 offers following advantages: 

flexibel through the availability of different blocks 

user friendly software that can acommodate all the latest PCR protocols such as "Touchdown", "RAPD", and 

"Long PCR" 

excellent performance - 1,6°C cooling and 2,5°C heating per second in the 55°C to 90°C range, blockuniformity 

0,3°C 


heated and hight movable lid for oil free PCR, heating temperature 100-115°C 


0,2ml - 0,5ml - 96 Well - 384 Well - In situ 

connection to PC programms with control of 32 Cyclers from one PC 


FTC41S5D TC-412 inclusive 40 x 0,5ml block 60 x 0,5ml block 5.680,00 

FTC41H2D TC-412 inclusive 96 x 0,2ml block 96 x 0,2ml block 5.680,00 

FTC4384D TC-412 inclusive 384 well block 384 well 5.985,00 

FTC41FLD Flexigene inclusive in situ-Block 5.680,00 

FTC41B5D 60 x 0,5ml block 60 x 0,5ml 1.995,00 

FTC41BHD 96 x 0,2ml block 96 x 0,2ml 1.995,00 

FTC41BID in situ-block 1.995,00 

FTC41B384 384 well block 384 well 2.265,00 

Gradient-Cycler TC-512 from Techne 

TC-512 Gradient Cycler is useful for very high numbers of samples. Different blocks can be changed without 

tools in seconds. The big touchscreen shows currently the temperature development in block and the growing 

up temperature gradient. 50 Programs can be stored internaly as well as 500 onto the memorycard. 

Specifications: temperatur range 4 – 99°C 

temperature range gradient 20 - 70°C, maximum gradient 30°C (in 384 well block 16°C), minimum gradient 1°C 

temperature setting 0,1°C, blockuniformity 0,4°C 

heating 3°C / sec, cooling 1,8°C / sec 

heated and hight movable lid for oil free PCR, heating temperature 100-115 

dimensions: 420 x 220 x 260mm, weight 11,5kg 


FTC51S5D TC-512 inclusive 60 x 0,5ml block 7.395,00 

FTC51H2D TC-512 inclusive 96 x 0,2ml block 7.395,00 

FT51FLD TC-512 inclusive in situ-block 7.395,00 

FTC5384D TC-512 inclusive 384 well block 7.695,00 

FTC51B5D 60 x 0,5ml block 2.489,00 

FTC51BHD 96 x 0,2ml block 2.489,00 


FTC5B384 384 well block 2.795,00 

file:///F|/Kisker/Kisker/thermal.htm (8 von 8) [08.12.2005 22:31:17] 

Top of Page

Kisker-Biotech Personal Thermal Cycler 

Wir über uns 




Dokumentation 


Thermocycler 

Horizontale Gelsysteme 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Unsere Horizontal-Elektrophoresen sind weltweit bewährte Elektrophoresekammern. Sie zeichnen 

sich durch hohe Zuverlässisgkeit, Qualität und eine sehr robuste Bauweise aus. Die Geltanks, 

Deckel und Gelträgers sind aus Acryl gefertigt. Auch das Einfüllen heißer Agarose läßt das Acryl 

weder reißen noch springen. Rutschsichere Gummifüße sorgen für sicheren Stand. 

Eine große Anzahl Kämme garantiert exzellente Ergebnisse und Reproduzierbarkleit. 

Platinelektroden und stabile Verbindungen sorgen für ein zuverlässiges elektrisches Feld während 

des Laufes. Da das angelegte elektrische Feld erheblichen Einfluss auf die Laufeigenschaft der 

auzutrennenden DNA-Fragmente hat, wurde größter Wert auf korrosionsbeständige 

Stromverbindungen und Elektrodenführungen gelegt. Die Platin-elektroden sind über die geamte 

Breite gespannt, wodurch Randeffekte wie "Smiling" vermieden werden. 

Die Gele der Minigel-kammern können entweder in Gelgießträgern oder direkt in den Kammern 

durch eine 90° Drehung des Gelträger gegossen werden. Für die Midigelkammern stehen 

Gelgießsysteme zum Gelgießen zur Verfügung. Dieses gewährleistet eine extrem einfache 

Handhabung ohne Verwendung von Klebeband oder Agarose zur Abdichtung. 

Der aus Aluminium gefertigte variabel einsetzbare Gelgießstand E-VG sorgt für eine schnelle 

Wärmeableitung der heißen Agarose. Die Anlegeschiene kann in fünf Positionen arretiert werden 

und ist somit einsatzbar für die Modelle Mini- und Midigel. 

Alle Gelträgers verfügen über mehrere Positionschlitze für die Kämme angelegt, sodaß sowohl kurze 

Gele wie auch Gele mit einer sehr hohen Probenzahl gefahren werden können. Die Gelträger sind 

UV-transparent, d.h. Gele können ohne Beschädigungsgefahr auf dem Träger fotografiert werden. 

Minigel "View" mit UV-tansparentem Boden ist besonders geeeignet für "Low-melt-Agarosen", sodaß 

diese auch während des Laufes zur Kontrolle auf den Transilluminator begutachtet werden können. 

Auf Sicherheit wird größter Wert gelegt. Ein Zugriff in die stromführende Kammer ist nicht möglich 

mit Ausnahme der Microgelkammer, die im Niederspannungsbereich bis 40Volt betrieben wird. 

Microgel mit Netzgerät: Gelgrösse 5 x 6 cm (B x L) 


Agarosegel. Diese Kammer wird mit einem Niederstrom-Netzteil geliefert und ist besonders für 

Praktika geeignet. Die Microgelkammer ist aus einem Stück produziert und daher unverwüstlich., die 

Laufzeit beträgt circa 30 – 45 Minuten. 






Lieferumfang: Microgel-Kammer mit Platinelektroden, UV-Träger, Netzteil, 1 Kamm 2,0mm - 5 Zähne 



& DNA 

Measurement 

Kat. # Beschreibung Probenvolumen Euro 

EHO-7 Microgel mit Netzgerät bei 4mm Tiefe/Tasche 270,00 

EHO-7-5 Kamm 2,0 - 5 Zähne 24µl 29,00 


Gelgießstände 

file:///F|/Kisker/Kisker/deutsch/thermal.htm (1 von 9) [08.12.2005 22:31:19] 

Microparticles


Gelgießstände eignen sich zur Vorbereitung von mehreren Gelen. Die UVtransparenten 

Gelträger passen exakt in die Gelgießstände, dass die Gele ohne 

weiteres Abkleben anwenderfreundlich gegossen werden können. Katalog-Nr. 

und Preise sind bei den jeweiligen Kammern gelistet. 

Der aus Aluminium gefertigte variabel einsetzbare Gelgießstand E-VG sorgt für 

eine schnelle Wärmeableitung der heißen Agarose. Die Anlegeschiene kann in 

fünf Positionen arretiert werden und ist somit einsatzbar für die Modelle Mini- und 

Midigel. 

Kat. # Beschreibung Passform Euro 

E-VG Variabler Gelgießstand Mini- u. Midigele 295,00 

EHO-1-GS Gießstand 3 Minigele 89,00 

EHO-2-GS Gießstand 2 Midigele 89,00 

EHO-3-GS Gießstand 2 Midigele B 89,00 

EHO-4-GS Gießstand 1 Midigel MB 105,00 

Minigel: Gelgröße 7 x 8,3 cm (B x L) 


Agarosegel. Puffervolumen 300ml 

Gelvolumen 30ml (0,5cm Geldicke) 


Laufstrecke mit einem Kamm: 7cm, zwei Kämmen: 3,5cm 

Gelgießen direkt in der Kammer oder im Gelgießstand 

UV-transparenter Gelträger 7 x 8,3cm mit Dichtungen 

Außenmaße der Kammer: 15,5 x 18 x 8,5cm (B x L x H) 

Lieferumfang: Minigel-Kammer mit Platinelektroden, UV-Träger mit Dichtungen, 2 Kämme nach 

Wahl, Libelle, rutschsichere Gummifüße 

empfohlene Netzgeräte: 

EPS-304 300V/400mA mit Timer und Gelsaver 



EHO-1 Minigel bei 4mm Taschentiefe 279,00 









EHO-1-UVT UV-tranparenter Träger 7 x 8,3cm 79,00 

EHO-1-GS Gießstand für 3 Minigele 89,00 

EHO-1-GS-D 2 Silikondichtung für UV-Träger 14,00 

EHO-NP Nivellierplattform 99,00 

EHO-L Libelle 12,00 

Midigel: Gelgröße 12 x 14 cm (B x L) 

file:///F|/Kisker/Kisker/deutsch/thermal.htm (2 von 9) [08.12.2005 22:31:19]


Eine Kammer für analytische und präparative Arbeiten, Restriktionsverdau, PCR-Screening und 

RFLP. Puffervolumen 800ml 



Laufstrecke mit einem Kamm: 12,6cm, zwei Kämmen: 6,3cm 

Gelgießen direkt in der Kammer oder im Gelgießstand 

UV-transparenter Gelträger 12 x 14cm mit Dichtungen 

Außenmaße der Kammer: 21,5 x 26 x 9cm (B x L x H) 

Lieferumfang: Midigel-Kammer mit Platinelektroden, UV-Träger mit Dichtungen, 2 Kämme nach 




EPS-305 300V/500mA mit Timer und Gelsaver. 


EHO-2 Midigel bei 4mm T.-tiefe 369,00 

















EHO-2-UVT UV-tranparenter Träger 12 x 14 cm 89,00 

EHO-2-GS-D 2 Silikondichtungen für Gelträger 14,00 

EHO-2-GS Gießstand für 2 Midigele 89,00 

Midigel B: Gelgröße 14,5 x 10,2 cm (B x L) 

Eine breite Kammer für die Auftrennung von DNA/RNA Restriktionsfragmenten, PCR-Screening und 

RFLP. Puffervolumen 900ml 



Laufstrecke mit einem Kamm: 9cm, zwei Kämmen: 4,5cm 

Gelgießen im Gelgießstand 

UV-transparenter Gelträger mit Dichtungen 

Außenmaße der Kammer: 23,5 x 20,5 x 8,5cm (B x L x H) 








EHO-3 Midigel B bei 4mm Taschentiefe 399,00 









EHO-3-UVT UV-tranparenter Träger 14,5 x 10,2 cm 95,00 

EHO-3-GS Gelgieß-System für zwei Gelträger 89,00 




Midigel MB: Gelgröße 23 x 16 cm (B x L) 

Maxi-Breite Kammer für die Auftrennung von DNA/RNA Restriktionsfragmenten, PCR-Screening und 

RFLP. Puffervolumen 1.100ml 



Laufstrecke mit einem Kamm: 15cm, vier Kämmen: 3,2cm 

Gelgießen im Gelgießstand 

UV-transparenter Gelträger mit Dichtungen 

Außenmaße der Kammer: 34 x 28 x 8,5cm (B x L x H) 


Wahl, Libelle, nivellierbare Standfüße 






EHO-4 Midigel MB bei 4mm T.-tiefe 585,00 






EHO-4-GS Gelgieß-System für einen Gelträger 105,00 




Maxigel : Gelgröße 20 x 25 cm (B x L) 



Kammer für die DNA/RNA Anylyse und schnelles PCR-Screening von Proben. Puffervolumen 

3000ml 



Laufstrecke mit einem Kamm: 23cm, bei mehreren Kämmen: 1,5 - 17cm 

Gelgießen direkt im UV-Träger 

UV-transparenter Gelträger mit Gelschiebern 

Außenmaße der Kammer: 29,5 x 41,5 x 10cm (B x L x H) 

Lieferumfang: Midigel-Kammer mit Platinelektroden, UV-Träger mit Gelschiebern, 3 Kämme nach 

Wahl, nivellierbare Standfüße 




EPS-608 600V/800mA . 


EHO-5 Maxigel bei 4mm T.-tiefe 575,00 










EHO-5-S Gel-Schieber 14,00 



Minigel View: Gelgröße 10,2 x 8,3 cm (B x L) 

Kammer mit UV-Licht durchlässigem Boden; Minigel View ist aus einem Block gefräst, 

Undichtigkeiten gehören bei dieser Kammer der Vergangenheit an. Sie ist besonders geeignet für die 

Isolierung von DNA-Fragmenten aus Low-melt-Agarosen. Diese Kammer kann auch während des 

Laufes auf dem Transilluminator platziert werden, um den Fortschritt der Trennung verfolgen zu 

können. 

140ml 



Laufstrecke mit einem Kamm: 7,5cm, zwei Kämmen: 3,5cm 


Gelgießen direkt in der Kammer 

Außenmaße der Kammer: 16 x 15 x 5,2cm (B x L x H) 

Lieferumfang: Minigel-Kammer mit Platinelektroden, 2 Kämme nach Wahl, rutschsichere Gummifüße 






EHO-6 Minigel "View" bei 4mm T.-tiefe 299,00 

















Netzgeräte Serie 100 ersetz durch EV243 

Die Netzgeräte der Serie 100 sind jetzt ersetzt durch das technisch verbesserte Netzgerät EV243. 

Trotz günstigen Preises entsprechen Sie den weltweit gültigen Sicherheitsstandards und sind mit 

vielen anwenderfreundlichen Merkmalen ausgestattet, um eine schnelle und einfache Bedienung zu 

gewährleisten. Bis zu drei Elektrophoresen können gleichzeitig betrieben werden. Der Anwender ist 

bei Überspannungen und Kurzschluss durch sofortiges Abschalten des Gerätes geschützt, sobald 

wieder Strom vorhanden ist, wird die Elektrophorese mit den voreingestellten Parametern zu Ende 

geführt. 


Ausgänge für drei Elektrophoresen 

9x9 Programme 

Zeitschaltuhr 

großes LED-Display erleichtert die Ablesung 

grosser Drehknopf für einfache Einstellung von Spannung/Strom 

Spannung kann während des Laufes angepasst werden 

Schutz gegen Überspannung, Überstrom und Kurzschluss 

Anwendbar für horizontale und vertikale Minigele 

Abmessungen: 24 x 20 x 13 cm (BxTxH) , Gewicht 3 kg 


EV243 (E122) 400 300 50 459,00 

Netzgeräte Serie 800 

Netzgeräte der Serie 800 sind leistungsfähige, prgrammierbare Geräte für alle Anwendungsbereiche. 

Ausgestattet mit Sicherheitsstandards wie Selbsttest beim Einschalten gewährleisten sie eine 

schnelle und einfache Bedienung. Bis zu vier Elektrophoresen können gleichzeitig betrieben werden. 

Der Anwender ist bei Überspannungen und Kurzschluss durch sofortiges Abschalten des Gerätes 

geschützt, sobald wieder Strom vorhanden ist, wird die Elektrophorese mit den voreingestellten 

Parametern zu Ende geführt. Bis auf Modell E844 sind alle Netzgeräte mit einem 

Voltstundenintrgrator ausgestattet 


Ausgänge für vier Elektrophoresen 

Programmierbar mit 9 Programmen und je 9 unterschiedlichen Parametereinstellungen 

großes LED-Display erleichtert die Ablesung 

Folientastatur für einfache Einstellung von Spannung und Strom 

alle Modelle können mit konstanter Spannung, Strom oder Leistung, automatisches Cross-Over 

Schutz gegen Überspannung, Überstrom und Kurzschluss 

Abmessungen: 30 x 18 x 12 cm (BxTxH) , Gewicht E835/831/844/863/865/ 5 kg, E832 6 kg, 

E802/861/815/833/862 10 kg 


EV231 (E835, E831) 300 1000 150 615,00 

EV202 (E802) 300 2000 300 845,00 



EV243 (E844) 400 300 50 459,00 

EV265 (E863,E865) 600 500 150 749,00 

EV261 (E861) 600 1000 300 875,00 

EV215 (E815) 1200 500 300 915,00 

EV232 (E832) 3000 150 150 945,00 

EV233 (E833) 3000 300 300 1.255,00 

EV262 (E862) 6000 150 300 1.490,00 

Anwendungen Sequenzierung Horizontales/Vertikales Gel I E F Elektro-Elution Semi-Dry u. Western Blotting 

EV231 nein ja nein ja ja 

EV202 nein ja nein nein ja 

EV243 nein ja nein ja nein 



EV215 ja ja ja ja nein 



EV262 ja nein ja nein nein 

Netzgeräte 

Unsere Netzeräte werden unter Verwendung von hochqualitativen Komponenten entwickelt und 

produziert. Sie entsprechen den weltweit gültigen Sicherheitsstandards. Die Netzgeräte sind mit 

vielen anwenderfreundlichen Merkmalen ausgestattet, um eine schnelle und einfache Bedienung zu 

gewährleisten. EPS-305 und EPS 503 sind mit einem "Gelsaver" ausgestattt, der verhindert, dass 

die Banden nach längerer Standzeit in das Gel diffundieren. 

Kat. # Spannung V Stromstärke mA Leistung W Euro 

EPS-304 300 400 120 459,00 

EPS-305 300 500 150 599,00 

EPS-503 500 300 150 630,00 

EPS-606 600 800 300 961,00 

EPS-1006 1000 600 300 1.090,00 

EPS-1006P 1000 600 300 1.390,00 

EPS-202 200 1998 300 1.030,00 

EPS-3002 3000 300 300 1.235,00 

EPS-9009TX 3000 300 300 1.490,00 

CombiCycler 



Der CombiCycler mit einem kombinierten Block für 0,2 und 0,5 ml PCR-Tubes ist ein kompaktes Gerät, 

geeignet für Labore mit geringerem Probendurchsatz. 


flexible Probenkapazität 25 x 0,2 ml Reaktionsgefäße und 16 x 0,5 ml Reaktionsgefäße 

Temperierbereich+ 4° - + 99 °C 

Deckeltemperatur +50° bis +105 °C 

Temperatureinstellung 0,1 °C 

Temperaturgenauigkeit 0,2 °C 

Temperaturverteilung über den Block: bis 95 °C ± 0,5 °C, bis 72 °C ± 0,3 °C, bis 65 °C ± 0,2 °C 

Temperiergeschwindigkeit ± 3 °C/sec 

Programmanzahl 100 Programmparameter: Anzahl der Schritte im Programm:1 bis 9 

Anzahl der Schritte in einem Zyklus: 1 bis 7 

Anzahl der Zyklenwiederholung: 0 bis 99 

weitere Spezifikationen: 

Abmessungen 240 x 260 x 165 mm 

Gewicht 4,5 kg 

Netzanschluss 220/240 Volt 50/60 Hz 

Kat. # Beschreibung Kapazität Euro 

LCC-41 CombiCycler inklusive Block 25 x 0,2 ml und 16 x 0,5 ml 2.150,00 

Abb. 1: PCR-Produkte, aufgetrennt auf einem Agarosegel (0,8%, 12 x 6 cm, 0,5 x TAE). 

Es wurden je 5 µl der PCR-Produkte aufgetragen. Lane 1-12: PCR-Produkte (1-12) des CombiCyclers, 

Lane 13: 100 bp DNA Ladder Plus (MBI Fermentas), Lane 14-16: PCR-Produkte (14-16) eines anderen 

Thermocyclers (PCR-Produkt 16 ist die Negativ-Kontrolle, Ansatz 15 hat ein reduziertes Volumen (10 µl 

anstatt 20 µl. 

Abb. 2: Vergleich des Temperaturverlaufs des CombiCyclers (rot) mit einem anderen Thermocycler 

(scwarz) 


Mit den Geräten von TECHNE bieten wir eine zuverlässige und etablierte Produktlinie an. Der Techgene 

Personal Cycler TC-312 bietet folgende Vorteile: ein sehr kleiner und schneller Thermocycler 

Kühlgeschwindigkeit: 1,8°C und Heizgeschwindigkeit 3,0°C / Sekunde im Bereich 55-90°C 

Temperierbereich von 4°C bis 99°C 

Heizbarer Deckel für Öl - freies Arbeiten, Deckeltemperatur 100-115°C 

Ramping, Pause-Taste, Stopptaste, Autorestart 

Alarm und Kühlung am Programmende 

zwei Versionen:25 x 0,2ml und 20 x 0,5ml 

Abmessungen:330 x 170 x 190mm (LxBxH) 

80 Programme programmierbar mit max. 99 Cyclen 


FTC3105D Techgen inklusive 20 x 0,5ml Block 20 x 0,5ml block 3.079,00 

FTC3102D Techgen inklusive 25 x 0,2ml Block 25 x 0,2ml block 3.079,00 

FTC31B02 20 x 0,5ml Block 1.065,00 




Standard Cycler TC-412 von TECHNE 

Der Techne Standard Cycler TC-412 bietet folgende Vorteile: der Standardcycler der großen Klasse 

flexibel einsetzbar durch große Auswahl an Blöcken 

Kühlgeschwindigkeit: 1,6°C und Heizgeschwindigkeit 2,5°C / Sekunde im Bereich 55-90°C, Blockuniformität 

0,3°C 

Temperierbereich von 4°C bis 99°C 

Heizbarer und stufenlos höhenverstellbarer Deckel für Öl - freies Arbeiten, Deckeltemperatur 100-115°C 

Ramping, Pause-Taste, Stopptaste, Autorestart 

Alarm und Kühlung am Programmende 

Verbindung zu PC-Kontrollprogrammen, 32 Cycler von einem PC steuerbar 

verfügbare Blockversionen Versionen: 0,2ml - 0,5ml - 96 Well - 384 Well - In-situ 

Abmessungen:420 x 220 x 260mm (LxBxH) 

80 Programme programmierbar 


FTC41S5D TC-412 inklusive 40 x 0,5ml Block 60 x 0,5ml block 5.680,00 

FTC41H2D TC-412 inklusive 96 x 0,2ml Block 96 x 0,2ml block 5.680,00 

FTC4384D TC-412 inklusive 384 well Block 384 well 5.985,00 

FTC41FLD Flexigene inklusive in situ-Block 5.680,00 

FTC41B5D 60 x 0,5ml Block 60 x 0,5ml 1.995,00 

FTC41BHD 96 x 0,2ml Block 96 x 0,2ml 1.995,00 

FTC41BID in situ-Block 1.995,00 

FTC41B384 384 well Block 384 well 2.265,00 

Gradienten-Cycler TC-512 von Techne 

TC-512 ist für hohen Probendurchsatz geeignet. Die unterschiedlichen Blöcke sind ohne Werkzeug in 

Sekunden zu wechseln. Der große Touchscreen zeigt aktuell die Temperaturentwicklung im Block sowie den 

sich aufbauenden Temperaturgradienten graphisch an. 50 Programme können intern sowie 500 auf der 

mitgelieferten Memorycard gespeichert werden. 

Spezifikationen: Temperaturbereich 4 - 99°C, 

Temperaturbereich Gradient 20 - 70°C, Gradient Maximum 30°C (384 Well Block 16°C), Gradient Minimum 1° 

Temperatureinstellung 0,1°C, 

Blockuniformität 0,4°C, 

Heizung 3°C / Sekunde, Kühlung 1,8°C / Sekunde, 

heizbarer höhenverstellbarer Deckel, ein/ausschaltbar, Deckeltemperatur 100-115°C 

Alarm und Kühlung am Prgrammende 

Abmessungen: 420 x 220 x 260mm, Gewicht 11,5kg 


FTC51S5D Touchgene inklusive 60 x 0,5ml Block 7.395,00 

FTC51H2D Touchgene inklusive 96 x 0,2ml Block 7.395,00 

FT51FLD Touchgene inklusive in situ-Block 7.395,00 

FTC5384D Touchgene inklusive 384 well Block 7.695,00 


FTC51BHD 96 x 0,2ml Block 2.489,00 

FTC51BID Objektträger 2.489,00 

FTC5B384 384 well Block 2.795,00 

Seitenanfang 


Kisker-Biotech Dry block heat & water bathes 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Trockenblock Heizgerät I und III 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Diese mikroprozessorgesteuerten Heizgeräte bieten Platz für einen Block, Typ III, oder zwei 

Blöcke, Typ I. Das digitale LCD zeigt die aktuelle oder die gespeicherte Zieltemperatur an. 

Der Heizbereich erstreckt sich von Raumtemperatur bis 130°C bei einer Temperaturstabilität 

von 0,1°C. Externe Temperaturfühler ermöglichen die Temperaturkontrolle im Tube oder 

Block. Wir empfehlen die Verwendung der geeichten Temperaturfühler zur optimalen 

Temperaturkontrolle. 

Die Blöcke sind mit Sicherheitsdeckeln ausgerüstet, die ein Aufspringen der Tubes während 

der Aufheizphase sicher verhindern. Das Gerät mit den Dimensionen 21 x 25 x 8cm(BxTxH) 

benötigt nur die Fläche eines DIN A4 -Blattes. Das Gewicht beträgt ohne Blöcke 2,7 kg. 



& DNA 

Measurement 



Kat. # Beschreibung Form Euro 

L001-I Trockenblock Heizgerät für zwei Blöcke 619,00 

L001-III Trockenblock Heizgerät für einen Block 479,00 

L001-30K 30 x 0,5ml Block konisch 129,75 

L001-24P 24 x 1,5/2,0ml Block parallel 129,75 

L001-24K 24 x 1,5/2,0ml Block konisch 129,75 


L001-0815 8 x 15ml Block 15ml tubes 174,75 


L001-0000 ohne Bohrung 60,85 

Blöcke für Mikrotiterplatten nur für 

Trockenblockheizgerät I (L001-I) 


L001-96U 96 wells rund U-Form 347,65 

L001-96F 96 wells Flachboden 347,65 

L001-96V 96 wells V-Form 347,65 

L001-96T 96 x 0,2 Tubes für Cycler 347,65 

Trockenblock-Heizgerät II 

file:///F|/Kisker/Kisker/deutsch/block.htm (1 von 4) [08.12.2005 22:31:21] 

Microparticles


Dieses kleine Gerät ist eine preisgünstige Alternative zu aufwändigen Mehrblockgeräten. Der 

Heizbereich erstreckt sich von Raumtemperatur bis +100°C, die aktuelle bzw. gewählte 

Zieltemperatur wird über die LCD-Anzeige abgelesen. Der Deckel kann zum Schutz bei hohen 

Temperaturen bzw zur Verbesserung der Temperaturstabilität geschlossen werden. Die Aufheizzeit 

bis 100°C beträgt 25 Minuten, die Temperaturstabilität 0,2°C. 

Aluminiumblock -1: Bohrungen für 21 x 0,5ml und 32 x 1,5ml Tubes 

Aluminiumblock -2: Bohrungen für 50x0,2ml, 21 x 0,5ml, 32 x 1,5ml Tubes 

Spezifikation: Größe 21 x 20 x 10cm, Gewicht: 4kg 

Anschlußwerte: 220Volt/50Hz/400Watt 


L019 / L019-1 Trockenblock Heizger. inkl Block 53 Plätze 499,00 

L019 / L019-1 Trockenblock Heizger. inkl Block 103 Plätze 549,00 

Mini Trockenblock Heiz- und Kühlgerät -10°C bis +100°C 

In vielen molekularbiologisch arbeitenden Laboratorien ist es nötig, die Temperatur der eingesetzten 

Enzyme und Reagenzien zu kontrollieren. Dieser kompakte kleine Trockenblock Heiz - Kühlgerät ist 

eine ökonomische Alternative zu Kühl- und Heizblockgeräten. Das Gerät arbeitet auf dem Prinzip der 

Peltiertechnik in einem weiten Temperaturbereich von -10°C bis 100°C. Einstellungen erfolgen 

bedienerfreundlich über die Folientastatur, Gewählte und Zieltemperatur sind über die Digitalanzeige 

ablesbar. 

Timer:1 Minute bis 96 Stunden, Umgebungstemperaturbereich: 15 - 27°C 

Timer:1 Minute bis 96 Stunden, Umgebungstemperaturbereich: 15 - 27°C 

Temperaturabweichung im Zentrum des Blockes circa 1°C, Temperaturabweichung im Randbereich 

des Blockes circa 2°C 

Spezifikation: 

Abmessung 190 x 225 x 115mm, Gewicht: 4,1kg 

Anschluß: 220Volt/50Hz/100Watt 

Kat. # Beschreibung Blockversion Euro 

L022-N-32 Trockenblockheiz/kühlgerät 20x0,5/12x1,5ml 980,00 

L022-N-20 Trockenblockheiz/kühlgerät 20x1,5ml 980,00 


Mischen und Inkubieren bzw. Kühlen sind wesentliche Arbeitsschritte molekularbiologischer Techniken. 

Dieses Gerät schüttelt Ihre Proben effizient mit einer Amplidude von 3mm und temperiert in einem sehr 

weiten Bereich von 4 bis 99°C. Die Mikroprozzessor gesteuerte Elektronik und hochwertige Peltiertechnik 

gewähren Temperaturgenauigkeit und - konstanz. Zu bedienen ist das benutzerfreundliche Gerät über 9 

Programme mit jeweils 9 Schritten. Vier einfach austauschbare Blöcke sorgen für die erforderliche Flexibilität 

im Laboralltag. 


Temperierbereich: 4 - 99°C 

Temperaturstabilität: +/- 0,5°C 

Schüttelgeschwindigkeit: 300 - 1500r.p.m., wählbar in 50iger Schritten 

Aufheizgeschwindigkeit: 5°C/min 

Abkühlgeschwindigkeit: 4°C/min von 99 bis 20°C, 1°C/min von 20 bis 4°C 

alle Werte beziehen sich auf den Temperaturbereich von 15 bis 35°C 

optional mit RS 232 Schnittstelle lieferbar 

Gewicht: 5,9kg inklusive Block, Abmessungen 190 x 190 x 325 mm, Leistung 125 Watt , 230V/115V AC, 

50/60Hz 


L057 Thermomixer 4-99°C 1.598,00 

L057-0,2 Wechselblock für 96 x 0,2ml Tubes 325,00 

L057-0.5 Wechselblock für 24 x 0,5ml Tubes 259,00 



file:///F|/Kisker/Kisker/deutsch/block.htm (2 von 4) [08.12.2005 22:31:21]



Thermo - Shaker ist ein kleines platzsparendes Gerät zum gleichzeitigen Schütteln und 

Temperieren von Mikrotubes. 


Temperatur, Geschwindigkeit und Zeit Mikroprozessor gesteuert 

Schüttelfrequenz: 250 - 1.400r.p.m., Amplitude 2mm 

Heizbereich: 25°C bis 100°C 

Zeitschaltuhr 1 Minute bis 96 Stunden 

3 austauschbare Blöcke 

Gewicht: 3,5kg, Abmessungen 205x230x130mm, Anschluss:12Volt/4 Ampere 


L056 Thermo - Shaker 859,00 

L056-32 Block für 20x0,5ml und 12x1,5ml Tubes 149,00 

L056-32-02 Block für 20x0,2ml und 12x1,5ml Tubes 169,00 

L056-20 Block für 20x1,5ml Tubes 139,00 

L056-20-2.0 Block für 20x2,0ml Tubes 149,00 

Schüttel-Inkubator für Mikrotestplatten oder Mikrozentrifugenröhrchen 

Ein Mikroprozessor gesteuertes Temperatur/Zeitmodul gewährleistet eine gleichmäßige 

Temeraturkonstanz. Die Temperaturübertragung erfolgt über Luftumwälzung. Ziel- und Istwerte sind 

über die digitale LCD-Anzeige ablesbar, der durchsichtige Plexiglasdeckel erlaubt zusätzliche visuelle 

Kontrolle. Das Gerät ist mit einem Sicherheitsschalter ausgerüstet, der den Schüttelvorgang bei 

Öffnen des Deckels stoppt. 


Temperaturbereich: 4°C über RT bis 80°C 

Temperaturgenauigkeit: +/- 0,3°C 

Schüttelfrequenz: 250 – 1.250 r.p.m., Orbit: 3mm 

Timer 0-9Std, 59Min. 

Heizleistung: 300 Watt 

Abmessungen: 280 x 240 x 210mm Gewicht: 9,0 kg 


L051 Trockenblock Kühl-/Heizbad 1.599,00 

L051-1,5 Plattform für 56 x 1,5/2,0ml Tubes 144,90 

L051-0.5 Adapter für 60 x 0,5ml Tubes 44,90 


L051-MTP Plattform für 4 Mikrotestplatten 144,90 


Wasserbad mit hoher Temperaturgenauigkeit 

Rostfreier Edelstahltank mit 8 Liter Kapazität. 

Heizbereich RT bis 100°C,Vorwahltemperatur und tatsächliche Temperatur über LED 

Anzeige 

Gewicht 7kg, Abmessung 360 



Kat.# Beschreibung Anschluss Euro 

L041 Universal Waterbath 220Volt,50Hz, 1000W 695,00 

Mikroprozessor gesteuerte Wasserbäder 

Temperaturgenauigkeit von 1 bis 2°C. 

Rostfreier Edelstahltank mit 4 l Kapazität. 

Heizbereich 30°C bis 100°C,LED Anzeige 

Magnetrührergeschwindigkeit 300 - 1000rpm 

Gewicht 4kg, Abmessung 340 x 170 x 170mm 

Abmessung mit Magnetrührer 340x 170 x 200mm 

L042-6 und L042-12:Temperaturgenauigkeit 0,3°C bei 37 °C 

Gewicht/Außenmaße: L042-6 = 8kg, 28 x 28,5 x 32,5cm /L042-12: 10kg, 40,5 x28,5 x 

32,5cm 


L042 Wasserbad 220 Volt, 50Hz 599,95 

L043 Wasserbad/Magnetrührer. 220 Volt, 50Hz 689,90 


Gewicht/Außenmaße: L042-6 = 8kg, 28 x 28,5 x 32,5cm /L042-12: 10kg, 40,5 x28,5 x 32,5cm 

L042-6 Wasserbad 6 Liter 220 Volt, 50Hz 589,90 


Seitenanfang 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

This economical microprocessor controlled dry block heat bath can run either two tubeblocks 

or one microtiter block. The digital LCD readout monitors the temperature in REAL- 

TIME and displays the target temperature. The heating range goes from room- temperature 

to 130°C at a temperature stability of +/- 0,3°C. The interchangable blocks for tubes are 

equipped with a safety tube cover which eliminates the pop open of tube caps during 

heating. The instrument is compact ( 33 x 22 x 8 cm, LxBxH) and needs only the space of a 

DIN A4 page. The weight is 2 kg without blocks and 3,6 kg with blocks. 

Cat. # description form Euro 

L001-I Dry Block Heat Bath for 2 blocks 619,00 

L001-III Dry Block Heat Bath for 1 blocks 479,00 

L001-30K 30 x 0,5ml block conical holes 129,75 

L001-24P 24 x 1,5/2,0ml block parallel holes 129,75 

L001-24K 24 x 1,5/2,0ml block conical holes 129,75 

L001-48K 48 x 0,2ml block conical 129,75 

L001-0815 8 x 15ml block 15ml tubes 174,75 


L001-0000 Undrilled block plain 60,85 

Blocks for Microtitre plates 


L001-96U 96 wells round U-Falcon 347,65 

L001-96F 96 wells flat 347,65 

L001-96V 96 wells V-Costar 347,65 

L001-96T 96 x 0,2ml plate for PE9600 Cycler 347,65 


This small dry block heat bath is a very economical alternative to large-scale multi block heat bathes. 

The heating range goes from ambient to +100°C, the active and choosed target temperature is read 

at the LCD-display. The lid of the dry block heat bath may be closed to protect user from high 

temperated blocks and to increase temperature stability. 

The aluminium block -1 has capacity for 21 x 0,5ml and 32 x 1,5ml tubes. 

The aluminium block -2 has capacity for 50 x 0,2ml tubes, 21 x 0,5ml and 32 x 1,5ml tubes. 

It takes 25 minutes to reach the maximum temperature of 100°C, the temperature stability is 0,2°C. 



file:///F|/Kisker/Kisker/block.htm (1 von 4) [08.12.2005 22:31:22] 



& DNA 

Measurement 



Microparticles


Cat. # Description form Euro 

L019 / L019-1 Dry block heat bath incl. Block 53 places 489,00 

L019 / L019-1 Dry block heat bath incl Block 103 Places 549,00 


In most molecularbiology laboratories is it necessary to control temperature of the used enzymes and 

reagent-mixes. This compact and small dry block cool bath is a very economical alternative to ice 

buckets with the advantage to keep samples on a specific temperature. The instrument is working on 

the peltier principle with a temperature range from - 10°C to +100°C. 

The temperature settings are made by touch pad and shown by a digital display. 

Two modells are available: block for 20 x 0,5ml and 12 x 1,5ml tubes, total 32 places and block for 20 

x 1,5ml tubes. 

Specification: dimension 190 x 225 x 115mm, weight: 4,1kg 


Cat. # Description blockversion Euro 

L022-N-32 Dry block cool bath 20x0,5/12x1,5ml 980,00 

L022-N-20 Dry block cool bath 20x1,5ml 980,00 


Mixing and incubation or cooling are essential steps of molecularbiological techniques. This unit is shaking 

your samples efficient with an orbit of 3mm and keeps temperature in a wide range from 4 to 99°C. The 

microprocessor controled electronic and high quality peltiers garant temperature accuracy and - constanty. 

Thermomixer is easy to use by 9 programms with 9 steps each. 4 easy interanchable blocks ensure for 

necessary flexibility during the daily work in the lab 









weight: 5,9kg inclusive block, dimensions 190 x 190 x 325 mm, power 125 Watt , 230V/115V AC, 50/60Hz 



L057-0,2 Block for 96 x 0,2ml tubes 325,00 

L057-0.5 Block für 24 x 0,5ml tubes 259,00 

L057-1.5 Block for 24 x 1,5ml tubes 259,00 



Thermo - Shaker is space saving, compact alternative for shaking and heating of microtubes 

at one time . 







weight: 3,5kg, dimension 205x230x130mm, power extern:12Volt/4 Ampere 

file:///F|/Kisker/Kisker/block.htm (2 von 4) [08.12.2005 22:31:22]




L056-32 block for 20x0,5ml and 12x1,5ml Tubes 149,00 

L056-32-02 Block for 20x0,2ml and 12x1,5ml Tubes 169,00 

L056-20 block for 20x1,5ml tubes 139,00 

L056-20-2.0 block for 20x2,0ml tubes 149,00 


The Shaking Incubator allows you to heat and shake your samples simultaneously. A microprocessor 

controlled temperature/time-modul garantes an evan temerature stability. The temperature transfer by 

air recirculation heats your sample fast and independant from long warm up times. Choosed and real 

temperature are shown on the digital LCD-display, the clear acrylic lid allows a visual control. The unit 

is equipped with a security switch, which stopps the shaking process when opening the lid. 


temperature range: 4°C over ambient to 80°C 



timer 0-9Std, 59Min. 




L051 Shaking-Incubator 1.599,00 

L051-1,5 Platform for 56 x 1,5/2,0ml Tubes 144,90 

L051-0.5 Adapter for 60 x 0,5ml Tubes 44,90 


L051-MTP Platform for 4 Microtiter plates 144,90 






weight 7kg, dimensions 360 x 270 x 240mm 

Cat.# description electrical requirement Euro 


Microprocessor controled Waterbath / magnetic stirred Waterbath 

file:///F|/Kisker/Kisker/block.htm (3 von 4) [08.12.2005 22:31:22]


temperature accuracy of 0,1°C. 


heatingrange 30 to 100°C, 

LED display 

magnetic stirrer speed 300 - 1000r.p.m. 

weight 4kg, 

dimension 340 x 170 x 170mm 

dimension with magnetic stirrer 340x 170 x 200mm 

L042-6 und L042-12:temperatureaccuracy 0,3°C at 37 °C 

weight/outer dimension: L042-6 = 8kg, 28 x 28,5 x 32,5cm /L042-12: 10kg, 40,5 x28,5 x 

32,5cm 


L042 Waterbath 220 Volt, 50Hz 599,95 

L043 Wb/magnetic stirrer 220 Volt, 50Hz 689,90 


weight/outer dimension: L042-6 = 8kg, 28 x 28,5 x 32,5cm /L042-12: 10kg, 40,5 x28,5 x 32,5cm 

L042-6 Waterbath 6 Liter 220 Volt, 50Hz 589,90 


file:///F|/Kisker/Kisker/block.htm (4 von 4) [08.12.2005 22:31:22] 

Top of Page

Kisker-Biotech Centrifuges 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

Micro-Centrifuge, now with second rotor for 2 strips of 8 PCR Tubes 

- this compact centrifuge is an ideal supplement for each laboratory, 

that must spin down small samples as DNA, RNA, Proteins etc. for 

preparing further investigations. 

- speed 6.200 rpm ( relative centrifuge force 2.000g), rotor for 6 x 1,5ml 

or 2 strips of 8 x 0,2ml tubes (optional) 

- improved latch lock and hinge of the transparent lid, less risk of 

damage 

- improved safety, with separate turn on/off switch, autostopp when 

opening the lid 

ultraquite motor, tested for 2.500 hours 

- unit size around 13cm diameter, weight 830g 

Cat.# description Power requirement Euro 

MZ001-N Micro-centrifuge 220Volt,50Hz 219,90 

MZ001-A-0.5 Adapter for 0,5ml 6 Adapters 6,50 

MZ001-A-0.4/2 Adapter for 0,4/0,2ml 6 Adapters 6,50 

MZ001-A-8x0,2 Rotor for 8er-strips 0,2ml PCR-Tubes 29,90 


This centrifuge is now presented in a new design as a very place saving combination of centrifuge 

and vortex mixer. The instrument eliminates long ways beetween centrifugation and sample mixing. 

The microcentrifuge tubes fit through the orifice of the lid for vortex mixing. 

he constant centrifuge speed is 2.400 r.p.m. at 700 x G, the vortex speed is also 2.400 r.p.m. The 

weight is 2 kg, dimensions are 130 x 170 x 100mm. The centrifuge - vortex mixer is supplied with 2 

rotor-discs for 12 x 0,5ml and 0,2ml and 12 x 1,5ml tubes. 



& DNA 

Measurement 



Cat. # Description Power Euro 

MZ002 Centrifuge/Vortexmix. 220Volt, 50Hz 289,00 

MZ002-A-8x0,2 Rotor for 8er-strips 0,2ml Tubes 25,00 

Multi-Fuge, 3500 r.p.m.: centrifuge or vortex, both in combination 

centrifuge:1.000 - 3.500 rpm, 100- steps chooseable 

vortexen:soft - medium - hard 

combine 

1- 99 minutes timer, 999 repeats 

rotor discs inclusive for 12x1,5ml and 12 x 0,5/ 12x 0,2ml 

file:///F|/Kisker/Kisker/mini.htm (1 von 6) [08.12.2005 22:31:24] 

Microparticles



MZ009 Multifuge 220Volt, 50Hz 479,00 

MZ009-A-8x0,2 Rotor for 8-Strips-0,2ml tubes 0,2ml Tubes 25,00 

SM-9000 Microcentrifuge for 12 x 1,5/2,0ml 

small - handy - fast, 

within 2 seconds up to 9000 r.p.m. constant speed, 5.000 x g, 

lid open > dynamic breaking 

rotor inclusive for 12 x 1,5ml/2,0ml tubes, 

brushless run in solid metal housing, 

dimensions: 200 x 170 x 150mm (LxWxH) 

Cat. # Power Euro 

MZ008 220V, 50-60Hz 449,00 

EBA 20 small centrifuge for 8 x 15ml Tubes 

The practical and handy EBA 20 is the ideal centrifuge for low sample quantities. It is supplied with an 8-place 

angle rotor and fitted with the E control panel. 

The rotor can be used with following tubes: 

8 x 15ml (17 x 100mm ) 

4 x 15ml, Falcons with Screwcaps (17 x 120mm ) 

8 x 9 - 10ml Blood collection tubes ( 16,5 x 92mm ) 

4 x 8ml Bloodcollection tubes ( 16 x 125mm ) 

8 x 8,5 - 100ml Blood collection tubes (16x100mm) 


speed: 6.000 r.p.m, to set in steps of 100, 3.421 x g 

dimension/weight: 215 x 231 x 292 (HxWxD), 4kg 


MZ007 208-240V, 50/60Hz 679,00 

Laboratory-Centrifuge for 50 ml Falcons and Microtestplates 

MZ-014 is a modern benchtop laboratory medical centrifuge useful for 

sedimentation of cells, bacteria, yeast, formed blood elements. It provides operation 

with tubes and microtest plates. MZ014 is designed for safe work (metal protecting 

housing), easy maintenance and wide application range in medical, biochemical, 

industrial and other type laboratories 


variable speed 1000 - 3000 r.p.m. 

Display LCD 




MZ014 Laboratory-Centrifuge, 220 Volt, 50 Hz 1.190,00 

MZ014-MTP Rotor for 2 Microtestplates 145,00 

MZ014-17100 swing out rotor for 12 x 10 ml/17x100 mm 165,00 

"Smart Runner", Microlitercentrifuge for molecularbiology, powerful and low priced, 14.000 

r.p.m.,15.558 x g 

file:///F|/Kisker/Kisker/mini.htm (2 von 6) [08.12.2005 22:31:24]


This microlitercentrifuge is delivered complete with angel rotor inclusive lid for 12 x 1,5/2,0ml tubes. 

Smart Runner is going quickly to the maximum speed and fits on small space on the laboratory desc. 


lid locking and holding device 

lid-open-button 

emergency lid lock release 

motor overheating protection 

imbalance switch-off 

settings of parameters by foil keyboard 

speed increments 100 r.p.m., continous run, short run 

timer 1 to 99 minutes 

dimensions 198 x 231 x 292 mm (HxWxD), weight around 6,0kg 


MZ010 Smart Runner incl.Rotor 869,00 

MZ010-2024 Adapter for 0,2ml PCR tubes 1,50 

MZ010-2023 Adapter for 0,5ml tubes 1,50 

"Cool Sprinter" Microlitercentrifuge without or with refrigeration -10°C - 40°C, 14.000 r.p.m., 

18.626 x g 

Cool Sprinter is one of the fastest in his quality. The max. speed is 14.000r.p.m, RCF is 

18.626. With Fast Cool it cools in 10 to 15 minutes down to 4°C. Thermosensitive samples 

can be centrifuged carefuly because of this reliable cooling . The smooth running and 

powerful motor with service free drive garantes best separation results. Aerosol tight and 

autoclavable accessories is available for save handling of infectious material. 

Comfort: display of IS-situation during the run 




lid-open-key 

RCF-key 

speed increments 100 r.p.m 


cooling MZ011: temperature in 1°C-increments from -10 to 40°C 

pre-cooling, stand-by cooling 


safetey: stop-display 





dimensions (HxWxD) MZ011-UK: 260 x 275 x 347 mm, weight 11,5kg, MZ011: 

260x281x547 weight 28kg 

g-force is depending on used rotor/tube as listed below. 

Cat. # Rotor kapacity RCF (g-Force) Euro 

MZ011-UK Sprinter Centrifuge 997,50 

MZ011 Cool Sprinter Centrifuge 2.660,00 

MZ011-2425 Lid aerosol tight for 2424/2430 130,00 

MZ011-2424 Rotor for 24 x 1,5/2,0ml tubes 18.662 190,00 

MZ011-2430 Rotor for 30 x 0,5ml tubes 17.749 285,00 

MZ011-2018 

Rotor for 4 x Strips á 0,2ml PCR 

tubes 

12.490 218,00 

MZ011-2040 Lid for rotor 2018 35,00 




MZ011-2023 Adapter für 0,5ml tubes 1,50 

Microcentrifuge without or with refrigeration -20 - +40°C, 18.r.p.m. 

Small bench top centrifuge for molecular biology, virology and 

bacteriology. Tube volume 0,2ml up to 50ml and hematocrit 

capillaries. Brushless drive guarantees exceptionally smooth 

running and speed stability; metal housing, centrifugation chamber 

made from easy to clean stainless steel; safety lid with window for 

speed control; lid looking and holding devise; automatic recognise of 

the rotor, autoclavable fixed angel and swinging rotors, three 

running programs can be stored; temperature set from 

-20°C up to +40°C; timer 1-99min., 

speed: angle rotor 18.000rpm at RCF of max. 31.867 

swinging rotor 13.000rpm at RCF of max 18.516 

Specificationes: temperature MZ005: -20°C bis +40°C; timer 1 - 99 

minutes 

weight MZ005: 36kg, dimension 178 x 333 x 620 mm (H x W x D) 

weight MZ005-UK: 16kg, dimension 278 x 333 x 390mm (H x W x 

D) 

Cat. # Description Capacity ml or mm RCF Euro 

MZ005 Centrifuge w.refrigeration 50ml max. 2.989,00 

MZ005-UK Centrifuge without refrigeration 50ml max. 1.688,00 

MZ005-1154 Swing out rotor 90° 24 x 0,5/1,5/2,0ml 18.516 899,00 

MZ005-1157 Angle rotor with lid 12 x 0,5/1,5/2,0ml 23.907 175,00 

MZ005-1195 Angle rotor, aerosol-tight 24 x 0,5/1,5/2,0ml 31.514 255,00 



MZ005-1189 Angle rotor, aerosol-tight 30 x 0,5/1,5/2,0ml 21.255 285,00 

MZ005-1158 Angel rotor,alu, 2 rows 48 x 1,5/2,0ml 21.255 upper r. 405,00 

MZ005-1160 Angel rotor f. PCR-Strips 6 x 8x0,2ml 18.845 298,00 

MZ005-1161 Drum rotor, 6-fold w. lid 60 x 1,5ml 14.150 519,00 

MZ005-1377 Drum rack 10 x 1,5/2,0ml 14.150 25,00 

MZ005-1378 Drum rack 32 x 0,4ml Beckman 14.150 42,95 

MZ005-1379 Drum rack 21 x 0,8 Bd oder 21 x 0,5ml 14.150 42,95 

MZ005-1020 Swing out rotor for MZ005 only 8x10ml/17x70; 5ml/12x75 2.879 204,50 

MZ005-1013 Swing out rotor for MZ005 only 6x15ml/17x100; 10ml/17x70 2.879 158,00 

MZ005-1015 Swing out rotor for MZ005 only 12x15ml/17x100; 12x5ml/12x75 4.105 355,00 

MZ005-1016 Angel rotor for MZ005 only 6x50ml/29x107; 3x50ml/Falcon 3.904 340,00 

MZ005-1023 Hematocrit-rotor w.lid 24 capillaries 21.382 204,50 

Universal 32, without or with refrigeration -20°C up to +40°C, 18.000 r.p.m. 



These universal table centrifuge is useful for sedimentation of cells, bacteria, 

yeast, DNA/RNA and for proteinprecipitation. Universal 32 means perfectly 

smooth running at both high and low speeds, versatility, an enormous range of 

easily interchangable accessories and high RCF (23.907 for microtubes, 9.418 

for 85 ml tubes). Tubes in volume from 0,2ml to 100ml, microtiterplates, 

haematocrit capillaries and ZYTO-accessories can be used at small lab-space. 

Extremly short run up- and run down times, impulse-button, RPM or RCFsetting 

in 10- steps as well as 3 runningprogramms make the centrifuge user 

friendly. 


minutes 


weight MZ012-UK: 29 kg, dimension 346 x 395 x 520 mm (H x W x D) 

br> The complete assessories are available on request, please ask us for the 

possibilties for your tube, so fare not listed. 

Cat. # Description Capacity in ml RCF Euro 

MZ012 Cooling centrifuge 100ml max. 3.685,00 

MZ012-UK 

MZ012-1689 

Centrifuge without 

cooling 

Angel rotor 45°aerosol 

tight 

100ml max. 1.935,00 

for MZ012 only 30 x 0,5/1,5/2,0ml 21.255 439,00 

MZ012-1612 Angel rotor with lid 12 x 0,5/1,5/2,0ml 16.602 195,00 

MZ012-1613 Angel rotor 12-place 12x15ml/17x100; 6x15ml/Falcon 4.146 275,00 

MZ012-1420 Angel rotor aerosoltight 24 x 0,5/1,5/2,0ml 21.382 259,00 

MZ012-1622 



2-place MTP 2.093 899,00 

MZ012-1645 Swing out rotor 4-place MPT 1.896. 399,00 

MZ012-4345 

MZ012-1617 

MZ012-1619 

suspension f. MZ012- 

1645 





1 steel suspension 122,00 

8 x 50ml Falcon, 45° 3.857 379,00 

6 x 50ml Falcon, 90° 2.701 359,00 

MZ012-1462 Adapter for use of 15ml Falcons 12,00 

MZ012-1624 Swing out rotor 4-place 2.665 297,00 

MZ012-1381 Metal beaker 1 x100ml 84,50 

MZ012-1650 Hematocrit-rotor w.lid 24 capillaries 269,00 

MZ012-1626 Rotor with ZYTO beaker 6 place 2.093 1.085,00 

Rotina 35, without or with refrigeration -20°C up to +40°C, 15.000 r.p.m., RCF up to 24.400 

The high performance bech-top centrifuges Rotina 35 impress by state-ofthe-art 

technology, large capacity, extremely easy handling and exeptionally 

smooth and quiet running. They are mainly used in the fiels of diagnostic, 

genetic research and microbiology. Volumes from 0,2ml up to 250ml at large 

capacities as 10 x 50ml Falcons, 48 x 15ml or 4 x 250ml are no problem. 

Extremly short run-up and run down times, impulse-button, RPM input in 

increments of 10 or RCF-input in increments of 1 as well as 3 running 

programms make this centrifuge very easy to operate. 

It features also high safety standards: metalhousing and -lid, automatic 

rotorrecognition, imbalance switsch of, lid locking and holding, emergency lid 

lock release, brushless induction drive. 


minutes 

weight MZ013: 70kg, dimension 380 x 468 x 695 mm (H x B x D) 

weight MZ013-UK: 43kg, dimension 380 x 468 x 540mm (H x B x D) 



The complete assessories are available on request, please ask us for the 

possibilties for your tube, if not listed. 

Cat. # Description Capacity ml RCF Euro 

MZ013 Cooling centrifuge 250ml max. 4.679,00 

MZ013-UK Centrifuge without cooling 250ml max. 2.849,00 

MZ013-1789 Angel rotor 45°aerosol tight 30 x 0,5/1,5/2,0ml 24.400 468,00 

MZ013-1713 Swing out rotor 2-place MTP, 45° 1.968 758,00 

MZ013-1735 Suspension for MZ013-1713 Metalsuspension 299,00 

MZ013-1725 Swing out rotor 4-place MTP, 90° 2.147. 419,00 

MZ013-4345 Suspension for MZ013-1725 1 steel suspension 119,00 

MZ013-1717 Swing out rotor 10-place 45° 

w. suspension f. 10 x 50ml 

Falcons 

4.556 579,00 

MZ013-1462 Suspension for MZ013-1717 for 15ml Falcons 12,00 

MZ013-1794 



4-place MTP, 90° 2.808 434,00 

MZ013-1790 Metalsuspension for-1794 for 1 x 250ml 85,00 

MZ013-5133 Suspension for -1794 1 x (4x15ml Falcon) 2.808 45,00 

MZ013-1793 Suspension for -1794 1 x (2x15ml Falcons) 2.808 47,00 

MZ013-1726 Swing out rotor 6-place 90° 2.808 437,00 

MZ013-1742 Suspension for MZ013-1726 f. 7x15ml/17x100 43,00 

MZ013-1748 Rotor for ZYTO Becher 8-place 579,00 

file:///F|/Kisker/Kisker/mini.htm (6 von 6) [08.12.2005 22:31:24] 

Top of Page

Kisker-Biotech Mikrozentrifuge - Kleinzentrifuge 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Mikro-Zentrifuge, jetzt auch mit Rotor für 2 PCR-Tube Streifen á 8 PCR Tubes 

- 6.200 r.p.m (2000xg) für 6 x 1,5ml Tubes, sowie 2 Streifen á 8 x 0,2ml 

PCR Tubes im separaten Rotor (optional) 

- Adapter für 0,5 ml und 0,2 ml Tubes 

- verbesserte Deckelbefestigung minimiert Risiko einer Beschädigung 

der Deckelhalterung 

- erhöhte Sicherheit, mit separatem An/Ausschalter, Autostopp bei 

Deckelöffnung 

- sehr ruhiger Motor, getestet über 2.500 Std. 

- Abmessung: circa 13 cm Durchmesser, Gewicht: 830g 


MZ001-N Mikro-Zentrifuge 220Volt,50Hz 219,90 

MZ001-A-0.5 Adapter für 0,5ml 6 Adapter 6,50 

MZ001-A-0.4/2 Adapter für 0,4/0,2ml 6 Adapter 6,50 

MZ001-A-8x0,2 Rotor für 8er-Streifen 0,2ml PCR-Tubes 29,90 

Mikro-Zentrifuge, Vortex Mixer, "zwei in einem" 

Im neuen Design präsentiert sich diese platzsparende und preiswerte Laborhilfe als Kombination aus 

Zentrifuge und Vortexer. Lange Wege zwischen Zentrifugationsschritt und Probenmischung fallen 

weg. Die Reagenzgefässe können mittels des durch die Öffnung des Zentrifugendeckels ragenden 

Vortexaufsatzes aufgemischt werden. Die konstante Zentrifugengeschwindigkeit beträgt 2.400 r.p.m. 

bei 700xg, die Vortexgeschwindigkeit ist ebenfalls 2.400 r.p.m. Das Gewicht des Gerätes beträgt 2 

kg, die Maße sind 130 x 170 x 100mm. Das Gerät wird mit zwei Rotoreinsätzen für 12 x 0,5ml und 

0,2ml sowie 12 x 1,5ml Tubes geliefert. 

Cat. # Beschreibung Anschluss Euro 

MZ002 Zentrifuge/Vortexmix. 220Volt, 50Hz 289,00 

MZ002-A-8x0,2 Rotor für 8er-Streifen 0,2ml Tubes 25,00 

Multi-Fuge, 3500 r.p.m.: Zentrifugieren, Vortexen, beides kombinieren 

Zentrifugieren:1.000 - 3.500 rpm, 100- Schritte einstellbar 

Vortexen:sanft - mittel - stark 

Kombinieren 

1 - 99 Minuten Zeitschaltung, 999 Wiederholungen 

Rotorscheiben inklusive für 12x1,5ml und 12 x 0,5/ 12x 0,2ml 

file:///F|/Kisker/Kisker/deutsch/mini.htm (1 von 6) [08.12.2005 22:31:25] 

Microparticles


Kat. # Beschreibung Anschluss Euro 



SM-9000 Kleinzentrifuge 12 x 1,5/2,0ml 

klein - handlich - schnell, 

innerhalb von 2 Sekunden auf 9000 r.p.m. 

Festgeschwindigkeit, 5.000 x g, 

Laufunterbrechung bei Deckelöffnung, 

Rotor inklusive für 12 x 1,5ml/2,0ml Tubes, 

Geräusch armer Lauf im Metallgehäuse, 

Abmessung: 200 x 170 x 150mm (LxBxH) 

Kat. # Anschluss Euro 

MZ008 220V, 50-60Hz 449,00 

EBA 20 Kleinzentrifuge für 8 x 15ml Tubes 

Die praktische EBA 20 ist das ideale Gerät für geringe Probenaufkommen. Serienmäßige Ausstattung: 

8 - fach Winkelrotor und E-Steuerung. 

Rotoreignung für: 

8 x 15ml (17 x 100mm ) 4 x 15ml, Falcons mit Schraubverschluss (17 x 120mm ) 

8 x 9 - 10ml Blutabnahmegefäße 16,5 x 92mm ) 

4 x 8ml Blutabnahmegefäße 16 x 125mm ) 

8 x 8,5 - 100ml Blutabnahmegefäße (16x100mm) 

Ausstattung: Deckelverriegelung u. - zuhaltung; Anzeige der Istgeschwindigkeit 

Geschwindigkeit: 6.000 r.p.m, einstellbar in 100er Schritten, 3.421 x g 

Abmessung/Gewicht: 215 x 231 x 292 (HxBxT), 4kg 


MZ007 208-240V, 50/60Hz 679,00 

Labor-Zentrifuge für 50 ml Falcons und Mikrotestplatten 

Diese neuartige Tischzentrifuge eignet sich für die Sedimentation von Zellen, 

Bakterien, Hefen und Blutkomponenten. Es stehen Rotoren sowohl für Röhrchen 

als auch für Mikrotestplatten zur Verfügung 


Geschwindigkeitsintervalle 1000 - 3000 r.p.m. 

Display LCD 

Laufzeit max. 1 bis 30 Minuten 

Abmessungen 470 x 400 x 203 mm, Gewicht ca 13,5kg 


MZ014 Labor-Zentrifuge, 220 Volt, 50 Hz 1.190,00 

MZ014-MTP Rotor für 2 Mikrotestplatten 145,00 

MZ014-17100 Ausschwingrotor für 12 x 10 ml/17x100 mm 165,00 

"Smart Runner", Mikroliterzentrifuge für die Molekularbiologie, leistungsstark und preiswert, 

14.000 r.p.m.,15.558 x g 

file:///F|/Kisker/Kisker/deutsch/mini.htm (2 von 6) [08.12.2005 22:31:25]


Diese Mikroliterzentrifuge wird komplett mit einem Winkelrotor inklusive Deckel für 12 x 1,5/2,0ml 

Tubes geliefert. Sie läuft in Sekundenschnelle zur Höchstform auf und passt in kleinste Lücke auf 

dem Labortisch. 

Die Vorteile der Zentrifuge auf einen Blick: 

Deckelverrieglung und Deckelzuhaltung 

Deckel-auf-Taste 

Notentrieglung 

Motorüberhitzungsschutz 

Unwuchtabschaltung 

Übersichtliche Folientastatur 

Eingabe der Parameter mittels Folientastatur 

Geschwindigkeitsintervalle 100 r.p.m., Dauerlauf, Kurzlauf 

Anzeige des IST-Zustandes während des Laufes 




MZ010 Smart Runner inkl.Rotor 869,00 

MZ010-2024 Reduzierung für 0,2ml PCR Tubes 1,50 

MZ010-2023 Reduzierung für 0,5ml Tubes 1,50 

"Cool Sprinter" Mikroliterzentrifuge ungekühlt oder gekühlt -10°C - 40°C, 14.000 r.p.m., 18.626 x g 

Der Cool Sprinter gehört zu den schnellsten seiner Klasse. Die max Drehzahl liegt bei 

14.000r.p.m, die RCF bei 18.626. Mit Fast Cool kühlt sie sehr fix: in 10 bis 15 Minuten auf 

4°C. Dank dieser zuverlässigen Kühlung lassen sich auch thermolabile Proben schonend 

zentrifugieren. Der laufruhige und leistungsstarke Motor mit wartungsfreiem Frequenzantrieb 

garantiert beste Trennergebnisse. Für sicheres Arbeiten mit infektiösem Material steht 

aerosoldichtes und autoklavierbares Zubehör zur Verfügung. 

Bedienerkomfort: Anzeige des IST-Zustandes während des Laufes 

Gut ablesbares digitales Display 

Motorische Deckelverriegelung 

Impulstaste für kurzes Anzentrifugieren 


RCF-Taste 

Geschwindigkeitsintervalle 100 r.p.m 

Laufzeit max. 99 Minuten 

Kühlung MZ011: Temperatur in 1°C-Schritten von -10 bis 40°C 

Vorkühlfunktion, Stand-by Kühlung 

Automatische Abschaltung bei Deckelöffnung oder Zeitvorwahl 

Sicherheit: Stillstandsanzeige 

Mikroprozessor - Steuerung 

Deckelzuhaltung und Notentrieglung 

Motor- und Keselrüberhitzungsschutz 


Abmessungen (HxBxT) MZ011-UK: 260 x 275 x 347 mm, Gewicht 11,5kg, MZ011: 

260x281x547 Gewicht 28kg 

Die g-force ist abhängig vom verwendeten Rotor/Tube wie untenstehend aufgeführt. 

Kat. # Rotorkapazität RCF (g-Force) Euro 

MZ011-UK Sprinter Zentrifuge 997,50 

MZ011 Cool Sprinter Zentrifuge 2.660,00 

MZ011-2425 Aerosoldichter Deckel f. 2424/2430 130,00 

MZ011-2424 Rotor für 24 x 1,5/2,0ml Tubes 18.662 190,00 

MZ011-2430 Rotor für 30 x 0,5ml Tubes 17.749 285,00 

MZ011-2018 Rotor für 4 x Streifen á 0,2ml PCR T. 12.490 218,00 

MZ011-2040 Deckel f. Rotor 2018 35,00 





Mikrozentrifuge, ungekühlt oder gekühlt -20°C bis +40°C, 18.000 r.p.m. 

Diese kleinen Mikroliterzentrifugen finden Ihren Einsatz in 

Molekularbiologie, Virologie und Bakteriologie. Gefässe im Volumen 

0,2ml bis 50ml sowie Haematocritkapillaren können eingesetzt werden. 

Der kollektorlose Antrieb gewährt hohe Laufruhe und 

Drehzahlstabilität. 3 Laufprogramme können gespeichert werden., bei 

Unwucht erfolgt automatische Abschaltung. 

Hohe Sicherheitsstandards: Metallgehäuse, Schleuderraum aus 

rostfreiem Edelstahl, automatische Rotorerkennung, Unwuchtschalter, 

hygienedichter Deckel, phenolbeständige und autoklavierbare Rotoren 

(einige Rotoren benötigen Reduzierungen ) 

Spezifikationen: Temperaturbereich MZ005: -20°C bis +40°C; 

Zeitschalter 1 - 99 Minuten 

Gewicht MZ005: 36kg, Abmessung 178 x 333 x 620 mm (H x B x T) 

Gewicht MZ005-UK: 16kg, Abmessung 278 x 333 x 390mm (H x B x T) 

Kat. # Beschreibung Kapazität ml oder mm RCF Euro 

MZ005 Kühlzentrifuge bis -40°C 50ml max. 2.989,00 

MZ005-UK Zentrifuge ohne Kühlung 50ml max. 1.688,00 

MZ005-1154 Ausschwingrotor 90° 24 x 0,5/1,5/2,0ml 18.516 899,00 

MZ005-1157 Winkelrotor mit Deckel 12 x 0,5/1,5/2,0ml 23.907 175,00 

MZ005-1195 Winkelrotor, aerosoldicht 24 x 0,5/1,5/2,0ml 31.514 255,00 




MZ005-1158 Winkelrotor, alu, 2-reihig 48 x 1,5/2,0ml 21.255 oben 405,00 

MZ005-1160 Winkelrotor f. PCR-Streifen 6 x 8x0,2ml 18.845 298,00 

MZ005-1161 Topfrotor mit Deckel 6 fach. 60 x 1,5ml 14.150 519,00 

MZ005-1377 Topfrack 10 x 1,5/2,0ml 14.150 25,00 

MZ005-1378 Topfrack 32 x 0,4ml Beckman 14.150 42,95 

MZ005-1379 Topfrack 21 x 0,8 Bd oder 21 x 0,5ml 14.150 42,95 

MZ005-1020 Ausschwingrotor nur für MZ005 8x10ml/17x70; 5ml/12x75 2.879 204,50 

MZ005-1013 Ausschwingrotor nur für MZ005 6x15ml/17x100; 10ml/17x70 2.879 158,00 

MZ005-1015 Ausschwingrotor nur für MZ005 12x15ml/17x100; 12x5ml/12x75 4.105 355,00 

MZ005-1016 Winkelrotor nur für MZ005 6x50ml/29x107; 3x50ml/Falcon 3.904 340,00 

MZ005-1023 Hämatokrit-Rotor m.Deckel 24 Kapillarröhrchen 21.382 204,50 

Universal 320, ungekühlt oder gekühlt -20°C bis +40°C, 15.000 r.p.m. 



Diese universell einsetzbaren Tischzentrifugen eignen sich zum Sedimentieren 

von Zellen, Bakterien, Hefen, DNA/RNA und zur Proteinpräzipitation. Sie 

zeichnen sich aus durch optimales Laufverhalten im nieder- und hochtourigen 

Bereich, vielseitiges und leicht auswechselbares Zubehör, hohe RCF (23.907 

für Mikrotubes, 9.418 für 85 ml Röhrchen). Gefässe im Volumen 0,2ml bis 

100ml, Mikrotiterplatten, Haematocrit Kapillaren sowie ZYTO-Zubehör kann bei 

geringem Platzbedarf eingesetzt werden. Extrem kurze Anlauf- und 

Bremszeiten, Impulstate, RPM oder RCF-Eingabe in 10er Schritten sowie 3 

Laufprogramme machen die Zentrifuge sehr bedienerfreundlich. 

Hohe Sicherheitsstandards: Metallgehäuse, Schleuderraum aus rostfreiem 

Edelstahl, automatische Rotorerkennung, Unwuchtabschaltung, 

Deckelverriegelung u.-zuhaltung, Notentriegelung, Motorüberhitzungsschutz 

Spezifikationen: Temperaturbereich MZ012: -20°C bis +40°C; Zeitschalter 1-99 

Minuten 

Gewicht MZ012: 52 kg, Abmessung 346 x 401 x 695 mm (H x B x T) 

Gewicht MZ012-UK: 29kg, Abmessung 346 x 395 x 520 mm (H x B x T) 

Die kompletten Möglichkeiten des vielseitigen Zubehörs sind sehr umfangreich, 

deswegen führen wir hier nur einige gängige Rotoren auf. Bitte fragen Sie uns 

nach der Lösung Ihres Zentrifugationsproblems. 

Kat. # Beschreibung Kapazität in ml RCF Euro 



MZ012-1689 Winkelrotor 45° aerosoldicht 30 x 0,5/1,5/2,0ml 21.255 439,00 


MZ012-1613 Winkelrotor 12-fach 

12x15ml/17x100; 

6x15ml/Falcon 

4.146 275,00 

MZ012-1420 Winkelrotor aerosoldicht 24 x 0,5/1,5/2,0ml 21.382 259,00 

MZ012-1622 Ausschwingrotor / Gehänge 2-fach MTP 2.093 899,00 

MZ012-1645 Ausschwingrotor 4-fach MTP 1.896. 399,00 

MZ012-4345 Nutgehänge f. MZ012-1645 1 Edelstahlgehänge 122,00 

MZ012-1617 Ausschwingr. m.Gehänge 8 x 50ml Falcon, 45° 3.857 379,00 

MZ012-1619 Ausschwingr. m.Gehänge 6 x 50ml Falcon, 90° 2.701 359,00 

MZ012-1462 

Reduzierung f. MZ012- 

1617/1619 

für Einsatz von 15ml Falcons 12,00 

MZ012-1624 Ausschwingr. o. Gehänge 4-fach 2.665 297,00 

MZ012-1381 

Leichtmetallbecher f.MZ012- 

1624 

1 x100ml 84,50 

MZ012-1650 Hämatokrit-Rotor m.Deckel 24 Kapillarröhrchen 269,00 

MZ012-1626 Rotor mit ZYTO Becher 6 fach 2.093 1.085,00 

Rotina 35, ungekühlt oder gekühlt -20°C bis +40°C, 15.000 r.p.m., RCF bis 24.400 

Die Rotina 35 Tischzentrifugen überzeugen durch modernste Technik, hohe 

Kapazität, besonderen Bedienerkomfort und große Laufruhe. Bevorzugte 

Einsatzgebiete sind die Diagnostik, Molekular- und Mikrobiologie. Gefässe 

im Volumen 0,2ml bis 250ml bei Kapazitäten von 10 x 50ml Falcons, 48 x 

15ml und 4 x 250ml sorgen für hohen Probenmengendurchsatz. Extrem 

kurze Anlauf- und Bremszeiten, Impulstaste, RPM oder RCF-Eingabe in 10er 

Schritten sowie 3 Laufprogramme machen die Zentrifuge sehr 

bedienerfreundlich. 

Hohe Sicherheitsstandards: Metallgehäuse, Schleuderraum aus rostfreiem 

Edelstahl, automatische Rotorerkennung, Unwuchtabschaltung, 

Deckelverriegelung u.-zuhaltung, Notentriegelung, Motorüberhitzungsschutz. 

Spezifikationen: Temperaturbereich MZ013: -20°C bis +40°C; Zeitschalter 1- 

99 Minuten 



Gewicht MZ013: 70kg, Abmessung 380 x 468 x 695 mm (H x B x T) 

Gewicht MZ005: 43kg, Abmessung 380 x 468 x 540mm (H x B x T) 

Die kompletten Möglichkeiten des vielseitigen Zubehörs sind sehr 

umfangreich, deswegen führen wir hier nur einige gängige Rotoren auf. Bitte 

fragen Sie uns nach der Lösung Ihres Zentrifugationsproblems. 

Kat. # Beschreibung Kapazität ml RCF Euro 



MZ013- 

1789 

MZ013- 

1713 

MZ013- 

1735 

MZ013- 

1725 

MZ013- 

4345 

MZ013- 

1717 

MZ013- 

1462 

MZ013- 

1794 

MZ013- 

1790 

MZ013- 

5133 

MZ013- 

1793 

MZ013- 

1726 

MZ013- 

1742 

MZ013- 

1748 

Winkelrotor 45° aerosoldicht 30 x 0,5/1,5/2,0ml 24.400 468,00 

Ausschwingrotor 2-fach MTP, 45° 1.968 758,00 

Gehänge für MZ013-1713 Leichtmetallgehänge 299,00 

Ausschwingrotor 4-fach MTP, 90° 2.147. 419,00 

Nutgehänge f. MZ013-1725 1 Edelstahlgehänge 119,00 

Ausschwingrotor 10-fach 45° 

m. Geänge f. 10 x 50ml 

Falcons 

4.556 579,00 

Reduzierung f. MZ013-1717 für 15ml Falcons 12,00 

Ausschwingrotor o. Gehänge 4-fach 2.808 434,00 

Leichtmetallgehänge für-1794 für 1 x 250ml 85,00 

Reduzierung für -1794 1 x (4x15ml Falcon) 2.808 45,00 

Reduzierung für -1794 1 x (2x15ml Falcons) 2.808 47,00 

Ausschwingrotor 6-fach 90° 2.808 437,00 

Nutgehänge für 7x15ml/17x100 43,00 

Rotor für ZYTO Becher 8 fach 579,00 

Seitenanfang 


Kisker-Biotech: Rotators, Vortex & Shaker 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




Mikrotestplatten-Thermo- Shaker 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



Dieser einzigartige Mikrotestplatten Thermo-Shaker kombiniert Schütteln und Heizen. Das Gerät 

kann 2/4 Mikrotestplatten entweder Schütteln oder Heizen oder gleichzeitig Schüttlen/Heizen. Die 

Schüttelfrequenz beträgt 250 - 1.200 rpm bei einer 2 mm Amplitude. Die Hitze wird sowohl von der 

Plattform wie auch vom heizbaren Deckel zu den Proben transferiert. Das beidseitige Heizen 

garantiert eine sehr gute Temperaturstabilität bei einer niedrigen Evaporationsrate. Der 

Temperaturbereich beträgt 25 °C oder Raumtemperatur bis zu 60°C. 

Alle elektronischen Functionen inklusive des 96 Stunden Timers sind mikroprozessor gesteuert. 

Spezifikationen:L079: Gewicht 6,2 kg, Abmessungen 270 x 260 x 125 mm (B x T x H) 

L079-4: Gewicht 9,0kg, Abmessungen 380 x 390 x 140 mm (B x T x H) 

externes Netzteil 12 volt, 4.16A 

Kat.# Beschreibung Euro 

L079 Mikrotestplatten-Thermo- Shaker 2 MTP`s 985,00 

L079-4 Mikrotestplatten-Thermo- Shaker 4 MTP`s 1.295,00 

Mikrotiterplatten-/ Multi-Well-Platten-/ Mikrozentrifugenröhrchen-Schüttler 

rotierende Schüttelbewegung mit 50 - 1.250 rpm / 4mm Amplitude Mikroprozessor 

gesteuert, konstante Geschwindigkeit auch bei hoher Frequenz, 

digitale Geschwindigkeitsanzeige gewählt/aktuell 

Gewicht 4,7kg, Maße 240 x 250 x 175mm (L x B x H) 

alle Geräte inklusive Halterungen, Trays optional. 



L027 Schüttelgerät für 4 MTP`s 539,00 


L029 Schüttelgerät für 4 Multi-Well Platten 539,00 

L030 Schüttelgerät für 4 x 20 1,5ml Tubes 539,00 

L030-0.5 Trays für 0,5ml Tubes 5 Stück 45,50 




file:///F|/Kisker/Kisker/deutsch/rotator.htm (1 von 10) [08.12.2005 22:31:28]


Neu in unserm Sortiment ist dieser kleine handliche Mikroplattenschüttler. Minimaler Platzbedarf, 

Abmessung 93x133x87mm (BxTxH). Offene Konstruktion zur Integration in Robotersysteme. 

Variable Geschwindigkeit von 950-1300rpm., Orbit 1mm. Orbis plus mit Zeitschaltuhr 1-180 Minuten. 

Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 Hz 


L070 Mikrotestplattenschüttler 259,0 

L071 Mikrotestplattenschüttler mit Zeitschaltuhr 329,0 

L070-A Aufsatz für 40x1,5/2,0ml Tubes 45,00 

L070-D Deckel aus klarem Styrol 33,00 

"Personal Microplate Incubator" 

Der Mikrotestplatten-Inkubator ist ein zuverlässiges, Service freies und langlebiges Gerät zur 

schonenden Inkubation von Mikrotestplatten. Es zeichnet sich aus durch minimalen Platzbedarf, 

Abmessungen 120x180x100mm (BxTxH). Der Heizbereich erstreckt sich von 5°C über 

Raumtemperatur bis 45°C. Das digitale Display zeigt Temeratur oder bereits abgelaufene 

Inkubationszeit. Alle Arten von Mikroplatten können inkubiert werden, nicht abgedeckte Platten 

weisen minimale Evaporation auf. 

Niedige Spannung gewährleistet höhere Sicherheit. 

Technische Werte: Netzteil 12Volt 2A DC, 100-230 Volt, 50/60 Hz, Gewicht 920g. 


L078 Mikrotestplatten-Inkubator 426,00 

Mini 3D Taumelschüttler 

Kleiner Taumelschüttler - rostfreies Stahlgehäuse, stufenlos einstellbare Drehzahl 

von 15 - 60 rpm, Neigungswinkel 7°, optional Aufsatz für 26 Tubes 

Abmessungen: 160 x 150 x 160 mm Tragfähigkeit: 500 g, Arbeitsplatte: 200 x 200 

mm 

Gewicht: 1,2 kg Anschluß: 12 Volt, 300 mA 


L040 3D-Schüttler 220Volt/50Hz 278,6 

L040-A Tube Adapter 30,15 

Multi Dancer, der Alleskönner 

Reziprok-Kreisen 0-360° 

3D-Schütteln 0-360°, 30°-Schritte, 0-250 Sekunden-Timer 

Vortexen 0 - 6°, 1°-Schritte, 0 - 5 Sekunden-Timer 

Geschwindigkeit 5 - 30 rpm, Plattformwinkel 7°, 

progarmmierbare Zyklen mit bis zu 125 Wiederholungen 

max. Ladekapazität 1 kg 


L045-N Multi Dancer 12Volt, 500mA 495,00 



MINI-Rocker 

Kleiner Wipptisch mit variabler Schüttelfrequenz von 7,5 - 30 rpm /min, mit einem 

Neigungswinkel von 7°. Der MINI-Rocker ist ausgestattet mit einem 0 - 24 Stunden Timer 

und LED Anzeige. 

Abmessungen: 200 x 250 x 130 mm, Gewicht: 2,1 kg, 

Plattform 200 x 200 mm,Tragfähigkeit: 0,5kg 

Anschluß: Externes Netzteil 12 V, 500 mA 


L024 MINI-Rocker 12Volt 500mA 295,00 

Maxi Rocker 

Ein Schüttler in kompaktem Design mit starkem Motor; Plattform mit Antirutschmatte, Abmessung 

300 x 300mm, Neigungswinkel 5,5° ( auf Wunsch lieferbar mit 4,5 oder 7,5° ) 

Variable Geschwindigkeit von 12 - 50 r.p.m. 

Tragfähigkeit 5kg 

Arbeitstemperatur von -5°C bis 60°C, maximale Luftfeuchtigkeit 95% Gewicht 7 kg, 

Dimensionen: 335 x335 x 190mm 


L047 Maxi-Rocker 220Volt/50Hz 735,00 

Test Tube Rotator, variable Geschwindigkeit 

Ein Test Tube Rotator zum Diffundieren, Dialysieren, Extrahieren oder Mischen. 

Elektronisch gesteuerter Motor mit Geschwindigkeit von 5 - 50 r.p.m., Steuerung über Zeitschaltuhr 0-99 

Stunden, 1-59 Minuten. Der Test Tube Rotator ist einfach zu bedienen durch "Memory-" und "Restart"- 

Funktionen und austauschbare Scheiben für Tubes von 4 - 40mm. Der Neigungswinkel kann eingestellt 

werden von 27° - 90°; Adapter den gleichzeitigen Betrieb von 2 oder 3 Scheiben. 

Spezifikation: Abmessungen: 200 x 200 x 250 mm (LxBxH); Gewicht.: 3,5 kg; Motor 220Volt, 50Hz 

Kat. # Beschreibung Anzahl x Tube Ø Euro 

L009 Var.Rotator 549,00 

L009-4 Scheibe (0,5ml) 40 x 4 - 9mm 79,00 

L009-6 Scheibe 30 x 6 - 9mm 79,00 

L009-9 Scheibe (1,5/2,0ml) 20 x 9-12mm 63,80 

L009-12 Scheibe (15ml) 20 x 12-16mm 63,80 

L009-16 Scheibe 20 x 16-19mm 63,80 

L009-19 Scheibe 18 x 19-22mm 63,80 

L009-22 Scheibe 15 x 22-25mm 63,80 


L009-28 Scheibe 10 x 28-32mm 63,80 

L009-32 Scheibe 10 x 32-40mm 63,80 

L009-A Adapter 1 44,00 




Zum Diffundieren, Dialysieren, Extrahieren oder Mischen etc. 

Ein synchroner Motor mit langsamer Rotationsgeschwindigkeit von 10 rpm, welche einen Tubewechsel 

während des Betriebes erlaubt. 

Die Rotationsscheibe kann in einem Winkel von 90 bis 27° eingestellt werden. Die Scheiben haben einen 

Durchmesser von 

200 mm, ausgestattet mit chemisch resistenten Klammern. 

Das Gerät wiegt 4 kg, Abmessungen 200 x 200 x 205 mm (L x B x H) 

Zum Bestellen der Scheiben bitte Bestellinfos des Rotators L009 verwenden! 


L004 Rotator 220Volt,50Hz 329,00 

Mini – Rotator, Standard 

Platzsparender Überkopfmischer für je 24 x 1,5/2,0 ml Mikrozentrifugenröhrchen oder 24 x 15 ml 

Röhrchen mit maximal 14mm Durchmesser. 

Betrieb im Kühlraum oder Heizraum im Temperaturbereich von 4 bis 45°C möglich. 

Spezifikation: Geschwindigkeit 5 – 30 .rpm, Digitaler Timer für 24 Std, LED Anzeige, Gewicht: 2,0 

kg, Maße: 225 x 145 x 140 mm, externes Netzteil. 

Kat. # Bezeichnung Anschluss Euro 

L053 Mini Rotator standard 12 Volt/ 500mA 329,00 

L053-8 Plattform für 8 Tubes bis 30mm Ø 35,00 


Platzsparender Überkopfmischer für 22 x 1,5/2,0 ml Mikrozentrifugenröhrchen oder 22 x 15 ml Tubes 

bis maximal 14 mm Ø. 

Spezifikation Multi-Rotator: Funktionen: Überkopfmischen, Reziprokes Überkopfmischen, 

Überkopfschütteln (Vortex) 

Geschwindigkeit; 5 – 30 rpm 

Timer für vertkales/reziprokes Schütteln:0-250 Sekunden 

Winkel beim Reziprokmischen 15 - 90° (15-Schritte wählbar) 

Winkel beim Vortexen 0 - 5° (1-Schritte wählbar) 

kontinuierlicher Betrieb mittels 24 Std. Timer 

Spezifikationen: Gewicht: 1,6 kg, Maße 310 x 110 x 175 mm, Anschluss: 220V, 50Hz 


L054-N Multi Rotator 12V,500mA 459,00 

L054-4/12 Plattform für 4x50ml/12x1,5-2,0-15ml 35,00 

Orbitalschüttler 

Ein kompakter Orbitalschüttler für viele 

Standardanwendungen 

biologisch/biochemischen Laboren mit 

bedienerfreundlich auswechselbaren 

Plattformen für unterschiedliche Anwendungen ( 

Flaschen oder Schalen). 

Schüttelfrequenz 50 - 250 rpm 

digitales Display und timer 1-999 Minuten. 

Amplitude 20 mm, maximale Ladekapazität 2,5 

kg 

Arbeitstemperaturbereich: 4 - 45°C, kein 

Feuchtraum 

Gewicht: 3,9 kg, Abmessung 220 x 190 x 70 

mm 

Kat. # Beschreibung Plattformmaße Euro 



L044 Orbitalschüttler 12Volt,800mA 499,00 

L044-F Universalflaschenaufsatz 270 x 195 79,00 

L044-F/6 Flaschenaufsatz für 6 x 250 - 300ml 250 x 190 79,00 

L044-F/12 Flaschenaufsatz für 12 x 100 - 150ml 250 x 190 79,00 

L044-P Flaschenaufsatz für Petrischalen etc. 220 x 220 30,20 

Orbitalschüttler - MULTI-POWER 

Der Orbitalschüttler MULTI-POWER eignet sich für intensives Mischen von biologischen 

Suspensionen oder chemischen Komponenten in größeren Volumina mit einer 

Gesamttragkraft von 15 kg. U.a. ist das Gerät einsetzbar im Mehrtagebetrieb für 

Extraktionen, Zellkultivierungen, Rotieren geschlossener Flaschen zur Dialyse. 

Bedienerfreundliche Prozessor kontrolliertes Programmieren, beleuchtetes LCD-Display 

3-fach Modus: Kreisen, Reziprok-Kreisen, Vibration 

Spezifikationen: Schüttelfrequenz 5 - 250 rpm 

digitales Display und Timer 1min-96 Stunden. 

Amplitude 20mm, maximale Ladekapazität 15,0 kg 

grosse Arbeitsplattform mit Spannwalzen 460 x 400 mm 

Arbeitstemperaturbereich: 4 - 45°C, kein Feuchtraum 

Gewicht: 19,3kg, Abmessung 485 x 520 x 140 mm 


L048-N Orbitalschüttler AC 12 V, 830mA 1.795,00 

L048-P Plattform mit Antirutschmatte 430 x 380 mm 96,00 


Der RockŃ Roller bewirkt gleichzeitiges Drehen und Kippen der Probenröhrchen. 

14 Rollen aus rostfreiem Stahl garantieren eine gleichmäßiges Mischen der Proben. Die 14 

Rollen mit den Abmessungen 208 x 10mm(L x Ø) drehen mit 10 r.p.m., die Kipp-Frequenz 

beträgt 5 Cyclen /Minute bei 35° 

Spezifikation L005: Gewicht: 3 kg, Abmessung 330 x 300 x 190mm (L x B x H) 

L005-V hat eine variable Dreh- und Kippgeschwindigkeit, die durch einen externen Motor 

gesteuert wird: 5 - 25 rpm.; 2,5 -12,5 Zyklen/Minute 

L005-SL ist ein Schwerlastroller mit 6 exzentrisch diagonal taumelnden PVC-Rollen, 

geeignet für Flaschen bis 1000 ml, konstante Rollengeschwindigkeit: circa 50 rpm. Die 

geringe Kippbewegung bewirkt eine besonders schonende Durchmischung, geeignet nicht 

nur für Vollblut oder Zellsuspensionen, sondern auch chemisch basierte Stoffe wie Farben, 

Kosmetika, Öle etc.. 

Spezifikation: Rollenlänge 26 mm, Gerät: 380 x 270 x 100 mm (L x B x H) 


L005 RockŃ Roller 220V, 50hz 489,00 

L005-V RockŃ Roller, variabel 220V, 50hz 640,00 

L005-SL RockŃ Roller, Schwerlast 220V, 50hz 449,00 

Rotary Mixer 



Der Rotary Mixer ist ein Mischer für Serien-Rotation von Tubes und Röhrchen mit einem Ø 

von 4 - 27 mm. Der Rotary Mixer hat einen stufenlos kontrollierbaren Motor mit einer 

Geschwindigkeit von 5-50 rpm.. Alle Teile sind aus Aluminium oder rostfreiem Stahl. Die 

Trommeln und Stäbe sind leicht auszuwechseln. Die digitale Anzeige Geschwindigkeit und 

Zeit von 1-99 Stunden, 1-59 Minuten. Für einfache Bedienung sorgen "Memory-", "Restart-" 

und "autostop"-Funktionen. 

Spezifikationen: Gewicht 3,3 kg, Abmessungen 450 x 170 x 190 mm(L x B x H), Anschluss 

220volt/50Hz 

Cat. # Beschreibung Anzahl x TubeØ Euro 

L010 Rotary-Mixer 589,00 

L010-16 Stab 20 x 16-20mm 98,95 

L010-19 Stab 18 x 19-22mm 98,95 

L010-22 Stab 18 x 22-27mm 98,95 

L010-4 Trommel 104 x 4 - 6mm 279,35 

L010-6 Trommel 104 x 6 - 9mm 279,35 

L010-9 Trommel 104 x 9-12mm 279,35 

L010-12 Trommel 48 x 12-16mm 179,40 

L010-912 Trommel 56 x 9-12mm 198,65 

Dispergier- und Homogenisiersystem für die Molekularbiologie 

Dieses speziell für Kleinstmengen in der Bio- und Gentechnologie entwickelte Handgerät gewährleistet die 

bestmögliche Zerkleinerung einzelner Bestandteile. Gewebeproben werden binnen Sekunden zu einer 

analysentauglichen Masse zerkleinert. Größere Ausbeuten an isolierter RNA von bis zu 100% sowie eine 

bessere Qualität durch schnelle, schonende Zerkleinerung sind ungeheuer wichtig, wenn z.B.nur wenig 

Ausgangsmaterial zur Verfügung stehen. Der unkomplizierten Werkzeugwechsel gewährleistet einfache 

Handhabung. Das Hand-Dispergier-/Homogenisiergerät ist geeignet für Volumina bis 100ml. Weitere Systeme 

zum Zerkleinern anderer Volumenbereiche bis 10.000ml sind erhältlich. Technische Details: 

Drehzahl 5.000 - 35.000min-1 

Gewicht 600g 

Aufnahmeleistung 145 Watt, Abgabeleistung 73 Watt 

Kat.# Beschreibung Drehzahl min -1 Watt Arbeitsvolumen Euro 

L080 Miccra D-1 Antrieb 15.000-35.000 135 100ml 369,00 

L081 Miccra D-3 Antrieb 18.000 fix 350 5.000ml 749,00 

L082 Miccra D-8 Antrieb 10.500-39.000 800 20.000ml 629,00 

L083 Miccra D-13 Antrieb 8.500-34.500 1.300 50.000ml 1.039,00 

Applikationsbereich Eintauchtiefe Arbeitsvolumen 

L080-20 DS-5/SK Zahnkranz 5mm Kleinstmengen 90-20mm 0,1- 10ml 469,00 

L080-100 DS-8/P Zahnkranz 8mm Gewebe 200-40mm 1 - 50ml 439,00 

L080- 

20/PG 

DS-20/PG Rotor 20mm Fest-/Flüssig Systeme 200-40mm 100-5.000ml 349,00 

L080-20/PF DS-20/PF Rotor 20mm Fest-/Flüssig Systeme 200-40mm 100-5.000ml 378,00 

L080- 

20/PG 

SmR 

L080-20/PF 

SmR 

L080- 

30/PG 

DS-20/PG SmR 

Schneidrotor 20mm 

DS-20/PF SmR 


faserige Materialien 200-40mm 100-3.000ml 359,00 


DS-30/PG Rotor 30mm Fest-/Flüssig Systeme 200-40mm 250-10.000ml 369,00 



L080-RW- 

30/PG 

Power-Mix 

RW-30/PG Mischrotor 

30mm 

Mischen/Zerkleinern 200-40mm 1.000-20.000ml 379,00 

"Power Mix" ist ein universell einsetzbarer Vortexmixer für Röhrchen von 7 bis zu 35mmØ. Das Gerät kann 

im "Press-to-mix" Mode oder kontinuierlich eingesetzt werden. Die Drehzahlregelung erfolgt stufenlos bis zu 

2.500 rpm bei einer Amplitude von 3 mm. Durch weiteres Zubehör kann das Gerät sehr vielseitig eingesetzt 

werden, wie z.B. mit 96 Well Platten oder 20 x 1,5 ml Zentrifugenröhrchen gleichzeitig. 

Spezifikationen: Gewicht 3,2 kg, Abmessungen: 135x120x135 mm (L x B x H) 


L002 Power Mix 199,95 

L002-MTP Mikrotestplattenhalter f. 1 x96 Platte 37,85 

L002-MRT Reaktionsgefäßhalter f. 20 tubes 49,10 

L002-1TTH Einpositionshalter f. Gefäße 20x200mm 33,25 

L002-2TTH Mehrpositionshalter f. 7 Tubes 85,90 

L002-UKP Universalkontaktplatte 16,35 

MINI-Vortex 

Ein platzsparender Vortexer für kleine Probenmengen in Tubes von 1,5 bis 50 ml. Der MINI- 

Vortex kann kontinuirlich oder im press-to-mix Mode betrieben werden. Die Geschwindigkeit 

kann variabel von 300 bis 2.500 rpm. eingestellt werden 

Abmessungen: 140 x 85 x 70 mm 

Gewicht: 0,8 kg 

Anschluss: 12 Volt/300mA 


L023 MINI-Vortex 12Volt/300mA 169,00 

Tube Vortexer 

Ein kleines preisgünstiges Gerät zum Mischen von 1,5/2,0 ml Mikrozentrifugenröhrchen zum Aufschütteln 

von Bakterien/Hefekulturen sowie zur DNA/RNA Aufreinigung. 

Spezifikation: Kapazität 16 x 1,5/2,0 ml 

Drehzahl konstant 2.400 rpm Amplitude 4mm 

Abmessung / Gewicht 120 x 140 x 150 mm / 4 kg 


L055 Tube Vortexer 220Volt, 50Hz 239,00 

Magnetrührer und Magnetrührer mit Heizplatte 



elektronischer Geschwindigkeitskontrolle, Geschwindigkeit von 50 bis 1.250 rpm., Doppelgehäuse, 

M10-Gewinde für Stativstab, Rührkapazität 5 oder 20 Liter Spezifikation: Gewicht 2,2 kg, Abmessung 

172 x 286 x 80 mm(L x B x H) Edelstahstellfläche 155 mm Ø Magnetrührer mit Aluminium-Heizplatte 

für gleichzeitiges und unabhängiges Heizen oder Mischen. Heizleistung beträgt 50 - 325°C bei 600 

Watt, Drehzahl beträgt 50 - 1.250 rpm. Auf der 145 mm Stellfläche werden Volumina bis 5/ 10/ 20 

Liter bewegt bzw erhitzt. Das Aluminiumgehäuse ist mit M10 Gewinde zum Stativeinsatz 

ausgerüstet. Spezifikation: Gewicht 2,8 kg, Abmessung 172 x 286 x 125 mm(L x B x H) Aluminium 

beschichtete Edelstahstellfläche 145 mm 

Kat.Nr. Bezeichnung/Rührleistung Motorleistung ein/aus Euro 

L012-5 Magnetrührer 5Liter 22 / 2,2 Watt 159,00 

L012-20 Magnetrührer 20 Liter 13 / 5 Watt 259,00 

L014-5 Heiz/Magnetrührer 5 L 22 / 2,2 Watt 239,00 


L014-20 Heiz/Magnetrührer 20 L 22 / 5 Watt 359,00 

Mini-Magnetrührer 

Ein kleiner Motor betriebener Magnetrührer im Edelstahlgehäuse mit ausreichender Mischkraft für 

viele Laboranwendungen. Die Drehzahleinstellung erfolgt stufenlos von 150 - 3000 r.p.m. 

Abmessung: 120 x 55 x 60mm 

Abmessung der Stellplatte: 110 x110 mm 

Mischkapazität: 2 Liter 

Gewicht: 1 kg 

Anschluss: 12Volt, 300mA 


L025 MINI-magnetic stirrer 12Volt, 300mA 127,30 

Multi Position Magnetrührer 

Alle Möglichkeiten in einer Mikroprozessor gesteuerten Produktlinie, alle Positionen 

individuell regelbar: mit oder ohne Heizung 4 oder 6 Positionen quadratisch oder Tischform 

Heizplatten aus 120 mm Edelstahl Geschwindikkeit 50 – 1200 rpm. Energieregelung 10 – 

300 Watt/ Pos. 

Kat.# Konfiguration Heizplatte Abmessungen mm Gewicht kg Euro 

L060 4-Position,Tischform ohne 545 x 245 x 110 7,2 599,00 

L061 6-Position,Tischform ohne 830 x 245 x 110 10 699,00 

L062 4-Position, quadratisch ohne 335 x 400 x 110 7 599,00 

L063 6-Position, quadratisch ohne 500 x 400 x 110 9,8 699,00 

L064 4-Position,Tischform mit 545 x 245 x 155 9,2 899,00 

L065 6-Position,Tischform mit 830 x 245 x 155 13,2 1.179,00 

L066 4-Position, quadratisch mit 335 x 400 x 155 9,4 899,00 

L067 6-Position, quadratisch mit 500 x 400 x 155 13 1,179,00 




This microplate washer is the most user friendly manual washer on the market. The user can choose 

to process the plate either in ist storage position- on top of the pump unit or, down on the labtop 

surface. The unit provides a quiet and reliable operation in a compact format, accurate dispensing 

and low residual volumes, adjustable dispense pressure and aspirate force. Further features are 







A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, power supply 

and all tubing. Single modules are available for customers, who have already a vacuum pump. 


L072 8-channel washer complete 1.298,00 


L072-8MCT 8-way manifold + carriert + tubing 433,00 


L072-8MCR 8-way manifold + carriert + reservoir kit 520,00 


L072-8M 8-way manifold 263,00 


L074 

Microplate Washer/Filler A1000 

Vaccum /pressure unit with single probe or 8-way manifold 

(specify when ordering) 

This microplate washer/filler A1000 is a unique processor for the fully automated washing and filling 

of both, 96 and 384 well microplates, including deep well and filter bottom formats. It is designed to 

achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing 

the user a multitude of individual adjustment possibilities. 

The unit provides: accurate dispensing and low residual volumes 

optional aerosol protection cover 

unique open construction for easy integration with robotic systems 

extremly easy to clean and maintain 

heads available in 8, 12, 16, 24, 48 concentric tip configurations 

plate sweep for the lowest residual volumes 

separate dispense and aspirate channels reduce the possibility of cross contamination 

liquid level sensing in all reservoirs with audible and visual warning system 

RS232 port ensures robotic integration 


technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, residual volume 3microliter per 

well typical action or 1 microliter per well with sweep, precision CV = +/- 3% 300µl, dispensing 

volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, wheight 9,2kg, dimension 

350x650x350mm wxdxh. 


1.280,00 

L075-8 8-channel washer A1000 4.557,00 




L075-48 48-channel washer A1000 f.384 well plates 6.836,00 

L076-8 8-channel washer A1200 deep well plates 5.858,00 


L077-8 8-channel washer/filler A1500 deep well plates 5.858,00 




Seitenanfang 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 




Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

This unique Microplate shaker combines Shaking and Heating. It can either shake or heat or 

shake/heat at same time two/four microplates. It provides shaking action 250 - 1.200 rpm / 2 mm 

amplitude. The heat is transfered to the sample from the platform and the heated lid. This heating 

from both sides guarantees a very good temperature stability at low evaporation. The temperature 

can be regulated from 25 °C or RT up to 60°C. 

All electronical functions including the 96 hour timer are microprocessor controled. 






& DNA 

Measurement 



Cat.# Decription Euro 

L079 Shaker/Heater for 2 MTP`s 985,00 

L079-4 Shaker/Heater for 4 MTP`s 1.295,00 


The shaker provides rotary shaking action with 50 - 1.250 r.p.m / 4mm amplitude. It 

is useful for all application like gentle shaking for cultures and strong shaking for 

tubes and MTP`s. The Shaker is microprocessor controlled and has a constant 

speed also at high frequency. More important for many applications is the gentle 

starting of the shaking process, which avoids a strong disturbing or squirt out of the 

sample at the start of the shaking action. 






L027 Shaker for 4 MTP`s 539,00 


L029 Shaker for 4 Multi-Well Plates 539,00 

L030 Shaker for 4 x 20 1,5ml tubes 539,00 

L030-0.5 Trays für 0,5ml Tubes 5 pc 45,50 




file:///F|/Kisker/Kisker/rotator.htm (1 von 9) [08.12.2005 22:31:30]


New, the small handy microplate shaker for reliable efficient and long life operation. Minimal footprint, 

dimensions 93x133x87mm (WxDxH). Open Construction for easy integration with robotic systems. 

Accomodates all styles of microplates. Momentary shaking action, no maintenance required. 

Brushless DC motor for quiet and reliable long life. Variable speed from 950 to 1300rpm, orbit 1mm. 

Orbis plus with timer 1 to 180 minutes. 

Low Voltage for added safetey. Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 Hz 


L070 Microplate shaker 259,0 

L071 Microplate shaker with timer 329,0 

L070-A Tray for 40x1,5/2,0ml tubes 45,00 

L070-D Lid, clear Styrene 33,00 


The personal microplate incubator for reliable efficient and long life operation. Minimal footprint, 

dimensions 120x180x100mm (WxDxH).The use of unique design and advanced electronic 

temerature control circuitry guarantees an outstanding stable and accurate performance combined 

with quiet and long operating life.Temperature range 5°C above RT to 45°C, build in timer, 

accomodates all styles of microplates. minumum evaporation loses with uncovered plates, no 

maintenance required. 

Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, weight 920g. 


L078 Microplate incubator 426,00 


A small 3D shaker - stainless steel housing, speed can be set stepless from 15 - 60 

r.p.m, shaking angel 7°, optional platform for 26 tubes available 




Cat. # Decription Anschluß Euro 

L040 3D-Shaker 220Volt/50Hz 278,6 







speed 5 - 30 r.p.m, rocking angel 7° 



Cat. # Decription Power Euro 


MINI-Rocker 








external powersupply: 12 Volt, 500mA 


L024 MINI-Rocker 12Volt, 500mA 295,00 

Maxi Rocker 

A shaker in compact design with a smooth running, strong motor; platform with anti-slip mat. The 

shaker is very useful for cold rooms and rooms with high humidity 

dimension 300 x 300mm, rocking angel 5,5° ( on request with 4,5 or 7,5° ) 


loading capacity 5kg 


weight 7 kg, Dimensionen: 335 x335 x 190mm 

Cat. # Decription power Euro 



The Test Tube Rotator provides diffusion, dialysis, extraction or mixing. 

The electronic controlled stepper motor provides speed from 5 - 50 rpm and a timer set up of 0-99 hrs, 1- 

59min. The Test Tube Rotator is easy to handle through "Memory-" and "Restart"-functiones and 

exchangable discs for tubes from 4 - 40mm. Angel of rotation can be set from 27° - 90°; adapters allows the 

simultaneous run of 2 or 3 discs. 

Specification: dimensions: 200 x 200 x 250 mm (LxWxH); weight.: 3,5 kg; Motor 220Volt, 50Hz 

Cat. # Description quantity x tube Ø Euro 


L009-4 disc (0,5ml) 40 x 4 - 9mm 79,00 

L009-6 disc 30 x 6 - 9mm 79,00 

L009-9 disc (1,5/2,0ml) 20 x 9-12mm 63,80 

L009-12 disc (15ml) 20 x 12-16mm 63,80 

L009-16 disc 20 x 16-19mm 63,80 

L009-19 disc 18 x 19-22mm 63,80 

L009-22 disc 15 x 22-25mm 63,80 

L009-25 disc (50ml) 12 x 25-28mm 63,80 

L009-28 disc 10 x 28-32mm 63,80 

L009-32 disc 10 x 32-40mm 63,80 

L009-A adapter 1 44,00 





A synchronous motor with slow rotation speed of 10 rpm, which permits tube exchange while operating. 

The rotating disc can be set continously at an angle between 90 and 27°. The disc has a diameter of 




Cat. # Description Quantity x tube Ø Euro 



This is a place saving mixer fore 24 microcentrifuge tubes or 24 x 15ml tubes with max. 14mm 

diameter. 

Specification Standard Rotator: speed 5 – 30 r.p.m digital timer for 24 Std, LED display 

weight: 2,0kg, dimension: 225 x 140 x 140mm 



L053-8 platform for 8 tubes up to 30mm Ø 35,00 


This is a place saving mixer for 22 x 1,5/2,0ml microcentrifuge tubes or 22 x 15ml tubes up to max. 

14mm Ø.. 


specification Multi-Rotator: functiones: rotation, vortexing 0-5°, reciprocal overheadmixing 15 - 90°, 


continous run by 24 hr. timer 



L054-N Mini – Multi-Rotator 12 Volt/ 500mA 459,00 

L054-4/12 platform for 4x50/12x1,5-2,0-15ml 35,00 


a compact orbital shaker with simple 

interchangable platforms for flasks and plates. 

Shaking speed 50 - 250 rpm with digital display 

and timer 1-24 hours. 

Amplitude 20mm, maximum loading capacity 2,5 

kg 

working temperature: 4 - 45°C, non condensing 


Cat. # description Platform size Euro 

L044 Orbital Shaker 12Volt,800mA 499,00 

L044-F univ.bottle 

platform 

L044- 

F/6 

adjustable bars 270 x 195mm 79,00 

platform for 6 x 250 - 300ml 250 x 190mm 79,00 



L044- 

F/12 

platform for 12 x 100 - 150ml 250 x 190mm 79,00 

L044-P platform for petridishes etc. 220 x 220mm 30,20 


The Orbital shaker MULTI-POWER is an ideal instrument for intensive mixing of biological 

suspensiones or chemical componentes in bigger volumina with a total capacity of 15 kg. 

The shaker can be used continously during several days for extractiones, tissue cultures, 

rotation of closed flasks for dialysis Dialyse. 











L048-P Plattform with Anti-slip-mat 430 x 380 mm 96,00 



14 stainless steel rotating bars guarantee an even mixing of samples. The 14 rolls, size 208 

x 10mm(L x Ø) are moved with 10 rpm, rocking frequency is 5 cycles /minute at 35° 

movement. 


L005-V has a variable roll- and rocking speed, which is controled by an external motor : 5 - 

25 rpm; 2,5 -12,5 cycles/min 

L005-SL is a roller with 6 excentrical diagonal moving PVC-rolls, useful for bottles up to 

1000ml, constant rolling speed: circa 50 rpm The soft rocking causes a very care mixing, 

useful for blood, cell suspensions, chemical based fluids like colors, cosmetics, oils etc.. 

Spezifikation: lenght of rolls 26mm, overall dimension: 380 x 270 x 100 (L x W x H) 




L005-SL RockŃ Roller, heavy 220V, 50hz 449,00 

Rotary Mixer 

The Rotary Mixer provides serial rotation of test tubes with a diameter range from 4 - 27mm. 

The mixer has a stepless controllable motor with a speed of 5-50 rpm. All parts are from 

aluminium or stainless steal construction. The drums and bars are easy to exchange. The 

digital read out shows speed and time from 1-99 hrs, 1-59 min.. Easy handling is provided 

through "Memory-", "Restart-" und "autostop"-functions. 

Weight 3,3kg, dimensions 450 x 170 x 190mm(L x W x H), power 220volt/50Hz 

Cat. # Description Quantity x tubeØ Euro 




L010-16 bar 20 x 16-20mm 98,95 

L010-19 bar 18 x 19-22mm 98,95 

L010-22 bar 18 x 22-27mm 98,95 

L010-4 drum 104 x 4 - 6mm 279,35 

L010-6 drum 104 x 6 - 9mm 279,35 

L010-9 drum 104 x 9-12mm 279,35 

L010-12 drum 48 x 12-16mm 179,40 

L010-912 drum 56 x 9-12mm 198,65 

Disperging- and Homogenizing System for Molekular biology 

This special developed handy mixer for smallest quantities in Bio- and Gentechnology garants the best possible 

dispersion and homogenization. Samples of tissue will be changed in seconds to an analysis suited material, 

resulting in bigger amounts and quality of isolated RNA. The system is easy to handle because of the 

uncomplicated change of rotors. The hand-disperging-/homogenizing sytem is useful for volumens up to 100ml. 

Further systems are available up to 10.000ml. Technical details: 

speed 5.000 - 35.000min-1 

weight 600g 

power input 145 Watt, power output 73 Watt 

Cat.# Description Speed min -1 Power Watt Working Volume Euro 





Application dip in Working Volume 

L080-20 DS-5/SK Zahnkranz 5mm smallest volumes 90-20mm 0,1- 10ml 469,00 

L080-100 DS-8/P Zahnkranz 8mm tissue 200-40mm 1 - 50ml 439,00 

L080-20/PG DS-20/PG Rotor 20mm solid/fluid systemes 200-40mm 100-5.000ml 349,00 

L080-20/PF DS-20/PF Rotor 20mm solid/fluid systemes 200-40mm 100-5.000ml 378,00 

L080-20/PG 

SmR 

DS-20/PG SmR cuttrotor 

20mm 

fibrous materialies 200-40mm 100-3.000ml 359,00 

L080-20/PF 

SmR 

DS-20/PF SmR cutrotor 

20mm 



L080-RW- 

30/PG 

Power-Mix 

RW-30/PG Mixrotor 30mm mix/cut 200-40mm 1.000-20.000ml 379,00 

"Power Mix" is an universal vortex mixer for test tubes from 7 to 35mmØ. The instrument can be used in 

"Press-to-mix" action or continously. The stepless speed can be controlled up to 2.500. By using further 

additional accessories 96 well plates can be mixed as well as 20 x 1,5ml centrifuge tubes at same time. 






L002-MTP micro-titre-plate-holder f. 1 x96 plate 37,85 

L002-MRT mini-reaction-tube holder f. 20 tubes 49,10 

L002-1TTH one position test tube holder 33,25 

L002-2TTH multi position tube holder f. 7 tubes 85,90 

L002-UKP universal contact plate 16,35 

MINI-Vortex 

A space saving instrument to mix small samples in tubes from 1,5 to 50ml. The MINI-Vortex can 

be used continuesly or in the press-to-mix mode. Speed can be setted variable from 300 to 2.500 

rpm 

Size: 140 x 85 x 70mm 

Weight: 0,8kg 

external Powersupply: 12 Volt/300mA 



Tube Vortexer 

A very economical priced equipment for mixing 1,5/2,0ml microcentrifugentubes,e.g for vortexing of 

bacteria/yeast cultures and for DNA/RNA purification. 

Spezifikation: capacity 16 x 1,5/2,0ml 

speed constant 2.400 r.p.m, amplitude 4mm 

dimension / weight 120 x 140 x 150mm / 4kg 

Cat. # Desciption Power Euro 



electronical speed controlle, speed range from 50 bis 1.250 rpm, double housing of aluminium and 

thermovacuum formed plastic, coated with electrostaticly applied powder, which is corrosion 

resistant; stirring capacity 5 or 20 liter 

Specification: weight 2,2kg, dimension 172 x 286 x 80 mm(L x W x H) 

stainless steel 155mm Ø 

Magnetic stirrer with Aluminium-hotplate for stirring and heating at same time or indpendant. 


speed range 50 - 1.250 rpm Mixing/heating on 145mm plate of volumina up to 5/ 10/ 20 liters . 

The aluminium housing is equipped with M10 threated support rod connection. Working temperature 

is 5-50°C, allowed humidity is 90% 

Specification: weight 2,8kg, dimension 172 x 286 x 125 mm (L x W x H) 

Cat. # Description motor rating in/out Euro 

L012-5 Magnetic Stirrer 5 Liter 22 / 2,2 watt 159,00 

L012-20 Magnetic Stirrer 20 Liter 13 / 5 watt 259,00 

L014-5 Hotplate/Magnetic Stirrer 5 L 22 / 2,2 watt 239,00 

L014-10 Hotplate/Magnetic Stirrer105 L 22 / 2,2 watt 310,00 

L014-20 Hotplate/Magnetic Stirrer 20 L 22 / 5 watt 359,00 




A small motor driven magnetic stirrer in a stainless steel housing with enough mixing power for many 

applications in the lab. Stepless speed regulation from 150 - 3000 rpm 


dimension plate: 110 x110mm 


weight: 1 kg 

external powersupply: 12Volt, 300mA 

Cat. # description Electrical requirement Euro 



All possibilities in one microprocessor controlled productline, all positiones individual to 

control: 





Cat.# Configuration Hotplate dimension weight kg Euro 

L060 4-Position,bench form no 545 x 245 x 110 7,2 599,00 

L061 6-Position,bench form no 830 x 245 x 110 10 699,00 

L062 4-Position, square no 335 x 400 x 110 7 599,00 

L063 6-Position, quare no 500 x 400 x 110 9,8 699,00 

L064 4-Position,bench form yes 545 x 245 x 155 9,2 899,00 

L065 6-Position,bench form yes 830 x 245 x 155 13,2 1.179,00 

L066 4-Position, square yes 335 x 400 x 155 9,4 899,00 

L067 6-Position, square yes 500 x 400 x 155 13 1,179,00 


This microplate washer is the most user friendly manual washer on the market. The user can choose 

to process the plate either in ist storage position- on top of the pump unit or, down on the labtop 

surface. The unit provides a quiet and reliable operation in a compact format, accurate dispensing 

and low residual volumes, adjustable dispense pressure and aspirate force. Further features are 







A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, power supply 

and all tubing. Single modules are available for customers, who have already a vacuum pump. 












L074 


Vaccum /pressure unit with single probe or 8-way manifold 

(specify when ordering) 

This microplate washer/filler A1000 is a unique processor for the fully automated washing and filling 

of both, 96 and 384 well microplates, including deep well and filter bottom formats. It is designed to 

achieve a fast and reliable microplate processing with high precision and repeatability, whilst allowing 

the user a multitude of individual adjustment possibilities. 











technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, residual volume 3microliter per 

well typical action or 1 microliter per well with sweep, precision CV = +/- 3% 300µl, dispensing 

volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 min, wheight 9,2kg, dimension 

350x650x350mm wxdxh. 


1.280,00 










file:///F|/Kisker/Kisker/rotator.htm (9 von 9) [08.12.2005 22:31:30] 

Top of Page

Kisker-Biotech Nylon wool fiber & PAP PEN 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



PAP PEN 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 








methods. 







Rack 

Systems 

Nylon Wool 

& PAP PEN 

The slide boxes have cork liming on the bottom, to protect the slides. On the inside cover of the box 

is a corresponding inventory slide sheet. The boxes can be stored securely on top of each other and 

are closed with a rust resistant nickel plated clasp ande hinge pin.Dimensions are 222 x 171 x 33mm 

( LxWxH ) 



PRODUCTS. 



& DNA 

Measurement 




R100-B blue 1 5,95 

R100-G green 1 5,95 

R100-Y yellow 1 5,95 

R100-R red 1 5,95 

R100-W white 1 5,95 

R100-GRA grey 1 5,95 




file:///F|/Kisker/Kisker/nylon.htm (1 von 2) [08.12.2005 22:31:31] 

Microparticles







washed once in Hank`s Balanced Salt Solution, counted and resuspended in Hank`s Balanced Salt Solution supplemented with 

10% fetal calf serum (FCS) or in other cell growth media like RPMI 1640 with 10% FCS, Earl`s Saline with 10% FCS or 


Our Nylon wool works well with e.g. human, mouse and rat cells. Please see also: current protocols in Immunology (1992) 3.2.1- 

3.2.4, contributed by K.S.Hathcock, T-Cell Enrichment by nonadherence to Nylon, John Wiley & Sons, Inc. 





1-2 x 108 mononuclear cells suspended in 2ml of media are pipetted onto 0,5grams of sterile Nylon 

wool. 




amount of nylon wool (e.g.1g) and the size of the syringe is proportionally increased or by repeating 

the procedure. 




syringes are used to force the medium through the Nylon Wool Fibers. The cells are washed once in 

in HBSS and resuspended. 


MKN-10 Nylon Wool Fiber 10g 38,00 



file:///F|/Kisker/Kisker/nylon.htm (2 von 2) [08.12.2005 22:31:31] 

Top of Page


Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




PAP PEN 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 








methods. 







Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 



The slide boxes have cork liming on the bottom, to protect the slides. On the inside cover of the box 

is a corresponding inventory slide sheet. The boxes can be stored securely on top of each other and 

are closed with a rust resistant nickel plated clasp ande hinge pin.Dimensions are 222 x 171 x 33mm 

( LxWxH ) 



PRODUCTS. 


R100-B blue 1 5,95 

R100-G green 1 5,95 

R100-Y yellow 1 5,95 

R100-R red 1 5,95 

R100-W white 1 5,95 

R100-GRA grey 1 5,95 




file:///F|/Kisker/Kisker/deutsch/nylon.htm (1 von 2) [08.12.2005 22:31:31] 

Microparticles







washed once in Hank`s Balanced Salt Solution, counted and resuspended in Hank`s Balanced Salt Solution supplemented with 

10% fetal calf serum (FCS) or in other cell growth media like RPMI 1640 with 10% FCS, Earl`s Saline with 10% FCS or 


Our Nylon wool works well with e.g. human, mouse and rat cells. Please see also: current protocols in Immunology (1992) 3.2.1- 

3.2.4, contributed by K.S.Hathcock, T-Cell Enrichment by nonadherence to Nylon, John Wiley & Sons, Inc. 





1-2 x 108 mononuclear cells suspended in 2ml of media are pipetted onto 0,5grams of sterile Nylon 

wool. 




amount of nylon wool (e.g.1g) and the size of the syringe is proportionally increased or by repeating 

the procedure. 




syringes are used to force the medium through the Nylon Wool Fibers. The cells are washed once in 

in HBSS and resuspended. 





Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/nylon.htm (2 von 2) [08.12.2005 22:31:31]

LabelGuardTM - Mikroliter Messzelle - Innovation DNA Analytik 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Wollen Sie ein Online - Bestellformular ausfüllen, während Sie im Katalog blättern? 

Klicken Sie einfach hier, um ein Extra-Fenster zu öffnen. 

LabelGuard TM Mikroliter Messzelle 

Die Innovation für die DNA Analytik 

● nur 3-5 µl Probenvolumen 

● Kompatibel mit den meisten Qualitätsspektrophotometern 

(Wellenlängenbereich 190-1100 nm) 

● Rückgewinnung der Probe zur Weiterverarbeitung möglich 

● Hohe Reproduzierbarkeit 

● in der Regel keine Probenverdünnung notwendig 

● Einfach zu bedienen 

● Schnell zu reinigen, keine Kreuzkontaminationen 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 


UV VIS-Spektralphotometer SPEKOL ® 1300 

Der Riese unter den Kleinen 

Das UV VIS-Spektralphotometer SPEKOL ® 1300 ist ein 

Einstrahlsystem für den Bereich von 190 -1100 nm mit einem 

einzigartigen Preis-Leistungsverhältnis. 

Perfekt für die tägliche Routine mit: 

Das robust entworfene Gerät ist 

kompakt, leicht und einfach zu 

handhaben. Die spektrale 

Bandbreite von 4 nm ist über 

dem gesamten Wellenlängenbereich 

konstant. 

● hochauflösenden LCD-VGA- Bildschirm für ausgezeichnete 

Bildqualität und Bedienbarkeit 

● spritzwassergeschützter Folientastatur 

● serieller RS 232-Schnittstelle 

LabelGuard TM Mikroliter Messzelle UV VIS-Spektralphotometer SPEKOL ® 1300 

Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/dna-measurement.htm [08.12.2005 22:31:32]





Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

You like to order simultaniously while scanning our catolog? 

Click here to open a second window and type in your choice. 

LabelGuard TM Mikroliter Messzelle 

Die Innovation für die DNA Analytik 


PCR Tubes & 

Plates 

Mini 

Centrifuges 








Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 

SPEKOL ® 1300 

The little Giant with great performance 


The UV VIS-Spektralphotometer SPEKOL ® 1300 is a single-beamsystem 

for the range of 190 -1100 nm with an outstanding priceperformance 

ratio. 

Perfect for daily Routine: 

The ruggedly designed 

photometer is compact, 

lightweight and easy to use. 

The internal RS-232 serial 

interface enables the 

instrument to be connected to a 

printer. 4 nm spectral 

bandwidth are constant over 

the entire wavelength range. 

● high resolution LCD-VGA- screen for superb images and 

easy operation 

● waterproof touch-sensitive keybord 

● serial RS 232-interface port 


file:///F|/Kisker/Kisker/dna-measurement.htm [08.12.2005 22:31:33] 

Top of Page

Kisker-Biotech Microparticles 




Hybridisation 

Documentation 




News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

This chapter includes a list of different special and standard beads or also called microspheres 

made of different materials for many applications. You will find beads from 0,05 to 1000µ. Particles 

up to 10µ are very monodisperse and have low standard deviation. 

Most microparticles are supplied in deionized water and have a long shelf life of several years when 

stored at 4°C. Biodegradable microparticles, made on basis of e.g. starch, have a shorter shelf life 

and should be used faster. 

All particles are offered in convenient laboratory quantities, nevertheless, most of them can be 

offered in bulk quantities or higher concentrations. Please ask for quotation, if you have bigger 

demands. 

If you do not find the particle for your application, we will be happy, to check the possibility of a 

custom synthesis. 

Silica-/ Glas-/ Biodegradable Particles 

file:///F|/Kisker/Kisker/micro.htm [08.12.2005 22:31:33] 

Polystyrene-/ Coated-/ Flow Cytometry-/ PMMA-/ 


Top of Page 



& DNA 

Measurement 


Magnetic Particles


Wir über uns 




Dokumentation 



Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 

This chapter includes a list of different special and standard beads or also called microspheres 

made of different materials for many applications. You will find beads from 0,05 to 1000µ. Particles 

up to 10µ are very monodisperse and have low standard deviation. 

Most microparticles are supplied in deionized water and have a long shelf life of several years when 

stored at 4°C. Biodegradable microparticles, made on basis of e.g. starch, have a shorter shelf life 

and should be used faster. 

All particles are offered in convenient laboratory quantities, nevertheless, most of them can be 

offered in bulk quantities or higher concentrations. Please ask for quotation, if you have bigger 

demands. 

If you do not find the particle for your application, we will be happy, to check the possibility of a 

custom synthesis. 


file:///F|/Kisker/Kisker/deutsch/micro.htm [08.12.2005 22:31:33] 



Top of Page 



& DNA 

Measurement 


Magnetic Particles

Kisker-Biotech Silica-/ Glas-/ Biodegradable Particles 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 





Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 





& DNA 

Measurement 





These monodisperse silica particles with a density of 2,0g/cm3 are simple to dispense and to separate. While polystyrene 

particles (d= 1,04) are difficult to separate by centrifugation under a size of 0,5 µ, silica particles do set down easy and are easy 

to resuspend. The silica particles are stabel in water and organic solvents, produced under a new dying method. Silca particles 


oligopeptides, proteines, lectines and antibodies. 




Silica Particles, plain are supplied in 5% suspension, exept PSi-0.05 and PSi-0.07 

The Silica Particles are also available in powdered form on request. 

Cat. # Size/ quantity/concentration chemistry Euro 

PSi-0.02 0,02µ/ 10ml/50mg/ml plain 399,00 








PSi-0,1 0,1µ/ 10ml/50mg/ml plain 101,70 

PSi-0.2 0.2µ/ 10ml/50mg/ml plain 101,70 


PSi-0.35 0,35µ/10ml/50mg/ml plain 101,70 






PSi-1.5 1,5µ 5ml/50mg/ml plain 84,40 

file:///F|/Kisker/Kisker/deutsch/micro_silicia.htm (1 von 10) [08.12.2005 22:31:36]



PSi-4.0 4.0µ 5ml/50mg/ml plain 90,00 






Silica Particles, NH2, supplied in 5% suspension, exept PSi-0.05NH2 

Cat. # Size/ quantity chemistry Euro 

PSi-0.05NH2 0,05µ/ 5ml/25mg/ml NH2 74,15 


PSi-0.2NH2 0.2µ/ 5ml NH2 74,15 

PSi-0.3NH2 0.3µ/ 5ml NH2 74,15 

PSi-0.35NH2 0,35µ/ 5ml NH2 74,15 

PSi-0.4NH2 0.4µ/ 5ml NH2 74,15 

PSi-0.5NH2 0,5µ/ 5ml NH2 74,15 

PSi-0.8NH2 0,8µ/ 5ml NH2 81,80 

PSi-1.0NH2 1,0µ/ 5ml NH2 81,80 

PSi-1.5NH2 1,5µ/ 5ml NH2 81,80 

PSi-3.0NH2 3,0µ/ 5ml NH2 81,80 

PSi-4.0NH2 4.0µ/ 5ml NH2 81,80 

PSi-5.0NH2 5,0µ/ 5ml NH2 81,80 

PSi-10.0NH2 10.0µ/ 5ml NH2 89,50 

PSi-15.0NH2 15,0µ/ 5ml NH2 99,70 

PSi-20.0NH2 20,0µ/ 5ml NH2 107,35 

Silica Particles, COOH, supplied in 5% suspension, exept PSi-0.05COOH 


PSi-0.05COOH 0,05µ/ 10ml/25mg/ml COOH 135,00 

PSi-0.2COOH 0.2µ/ 10ml COOH 135,00 


PSi-0.35COOH 0,35µ/ 10ml COOH 135,00 
















PSi-0.1 A 0,1µ/ 5ml Avidin coated 186,60 







PSi-3.0 A 3.0µ/ 5ml Avidin coated 199,60 






PSi-0.1 SA 0,1µ/ 1ml Streptavidin coated 219,00 







PSi-3.0 SA 3.0µ/ 1ml Streptavidin coated 219,00 






PSi-0.35 PA 0,35µ/ 1ml Protein A 142,50 





PSi-3.0 PA 3.0µ/ 1ml Protein A 157,00 






Silica Particles, plain, fluorescent-green, Excitation/Emmission: 485/510nm 


PSi-G0.05 0,05µ/ 10ml/ 25mg/ml fluo-green 193,80 





PSI-G1.5 1,5µ/ 5ml/ 50mg/ml fluo-green 112,50 





Silica Particles, Amino modified, fluorescent-green, Excitation/Emmission: 485/510nm 


PSi-G0.05NH2 0,05µ/ 10ml/ 25mg/ml fluo-green, amino 210,00 





PSI-G1.5NH2 1,5µ/ 10ml/ 50mg/ml fluo-green, amino 199,00 









PSi-R0.05 0,05µ/ 10ml/ 25mg/ml fluo-red 193,80 





PSI-R1.5 1,5µ/ 5ml/ 50mg/ml fluo-red 112,50 







PSi-R0.05NH2 0,05µ/ 10ml/ 25mg/ml fluo-red 210,00 





PSI-R1.5NH2 1,5µ/ 10ml/ 50mg/ml fluo-red 199,00 








Cat. # Size/ quantity/concentration Chemistry Euro 

PSi-B0.05 0,05µ/ 10ml/ 25mg/ml fluo-blue 245,00 




PSI-B1.5 1,5µ/ 5ml/ 50mg/ml fluo-blue 150,80 





Cat. # size Pack size Euro 

PBG-10/15 10 - 15nm 5g/ 40%in water 35,30 



Here we offer hollow glass beads of different sizes. PGBH-11 and PGH-18 are made from boresilicat, non porous, chemical inert 

and appears as white powder. 


Cat. # size/density Pack size Euro 

PBGH-11 11µ/1,1g/cm3 5g 19,90 

PBGH-18 18µ/0,6g/cm3 5g 19,90 

PBGH-10 0,5-10µ/2,5g/cm3 10g 19,90 

Glass Beads 

This serie of glass beads is designed for applications where inorganic beads with high density are required. The glass beads are 

manufactured from high pure raw materials and have a pure and shining surface. The density is 2,5 g/cm3, chemical 


250 µ = 95%. For your convenience we have listed in the table the nominal number of beads/g. This number is a guideline only. 







We also can offer on request Zirconium silicate (density 3,8g/cm3) and Zirconium silicate, Yttrium stabilized ( density 6,0g/cm3). 

These beads are used as grinding media in pest controlo, cosmetics and pharmaceutical industry. 

Cat. # size Pack size / beads/g Euro 

PGB-05 10 - 50µ 50g 2,4 x 10E7 20,40 



PGB-07 40 - 70µ 50g 7,0 x 10E6 20,40 

PGB-011 70-110µ 50g 1,0 x 10E6 20,40 

PGB-015 90-150µ 50g 7,0 x 10E5 20,40 

PGB-020 100-200µ 100g 2,8 x 10E5 20,40 

PGB-025 150-250µ 100g 6,2 x 10E4 20,40 

PGB-030 200-300µ 100g 95.000 20,40 

PGB-040 300-400µ 100g 21.000 20,40 

PGB-050 250-500µ 100g 14.500 20,40 

PGB-060 400-600µ 100g 6.000 27,60 

PGB-075 500-750µ 100g 3.100 27,60 

PGB-100 750-1.000µ 100g 1.500 27,60 

PGB-125 1.00-1.25 mm 100g 760 27,60 

PGB-155 1.25-1.55 mm 200g 220 16,60 

PGB-185 1.55-1.85 mm 200g 191 16,60 

PGB-200 1.70-2.00 mm 200g 95 16,60 

PGB-230 2.00-2.30 mm 200g 86 16,60 

PGB-260 2.30-2.60 mm 200g 48 16,60 

PGB-285 2.50-2.80 mm 200g 39 16,60 

PGB-330 2.85-3.30 mm 200g 28 16,60 

PGB-380 3.30-3.80 mm 200g 19 16,60 

PGB-430 3.80-4.30 mm 200g 12 16,60 




The density is 2,5 g/cm3, chemical characterisation: soda lime glass 69.2% SiO2, 11.4% K2O, 6.85% Na2O, 5.98% BaO, 2.45% 

CaO, 41% Al2O3, 9% CaO, 0.95 TiO2, 0.95 ZnO, 0,48% B2O3, 0.25%Sb2O3, 0,014%Fe2O3. For your convenience we have 

listed in the table the nominal number of beads/kg. This number is a guideline only. 


All glas beads availavle in bulk. 

Cat. # size Pack size beads/kg Euro 

PGBP-08 0,8 mm 500 beads 1.492.000 49,00 

PGBP-1 1,0 mm 500 beads 763.900 49,00 

PGBP-1.588 1/16 inch 500 beads 190.800 49,00 

PGBP-2 2,0 mm 500 beads 49,00 


PGBP-3 3,0 mm 500 beads 28.300 55,00 


PGBP-4 4,0 mm 500 beads 12.300 55,00 


PGBP-5 5,0 mm 500 beads 6.100 59,00 


PGBP-6 6,0 mm 500 beads 59,00 


PGBP-7 7,0 mm 200 beads 2.220 49,00 




PGBP-8 8,0 mm 200 beads 1.490 69,00 


PGBP-9 9,0 mm 200 beads 1.040 69,00 

PGBP-9.525 3/8 inch 200 beads 880 69,00 

PGBP-10 10,0 mm 100 beads 48,00 


PGBP-11 11,0 mm 100 beads 57,00 


PGBP-12 12,0 mm 100 beads 75,00 





between 10% and 20% depending on size ) and are available from 2nm to 250nm. They are supplied in 

100ml solution at optical density of 1.0, measured at 520nm. The number of particles/ml is given in the 

product/ordering table. The solutions are stabilized with HAuCL4. 


Cat. # size particles/ml Euro 

PGO-2 2nm 15,0 x 10 13 210,00 

PGO-5 5nm 5,0 x 10 13 210,00 

PGO-10 10nm 5,7 x 10 12 210,00 

PGO-15 15nm 1,4 x 10 12 210,00 

PGO-20 20nm 7,0 x 10 11 210,00 

PGO-30 30nm 2,0 x 10 11 210,00 

PGO-40 40nm 9,0 x 10 10 210,00 

PGO-50 50nm 4,5 x 10 10 210,00 

PGO-60 60nm 2,6 x 10 10 210,00 

PGO-80 80nm 1,1 x 10 10 210,00 

PGO-100 100nm 5,6 x 10 9 210,00 

PGO-150 150nm 1,7 x 10 9 210,00 

PGO-200 200nm 7,0 x 10 8 210,00 

PGO-250 250nm 3,6 x 10 8 210,00 


It is necessary to use "biodegradable particles" in a lot applications. Our particles are made from polylactide with a 

denmsity of 1,02. They are supplied in 1% aqueous suspension (10 mg/ml) and are stable at neutral pH for at least 3 

monthes. Degradation starts through basic or acid pH or enzymatic hydrolysis. The particles are available in a variety 

of sizes, chemistries and fluorescent colors. 


PBD-0.25 0,25µ/ 10ml plain 127,30 

PBD-2.0 2,0µ/ 10ml plain 101,70 

PBD-20.0 20,0µ/ 10ml plain 112,00 

PBD-30.0 30,0µ/ 10ml plain 117,00 



PBD-100.0 100,0µ/ 10ml plain 122,20 

PBD-NH-0.25 0,25µ/ 10ml NH2 184,00 

PBD-NH-2.0 2,0µ/ 10ml NH2 148,30 

PBD-NH-20.0 20,0µ/ 10ml NH2 152,90 

PBD-NH-30.0 30,0µ/ 10ml NH2 168,70 

PBD-NH-100.0 100,0µ/ 10ml NH2 184,00 

PBD-CO-0.25 0,25µ/ 10ml COOH 184,00 

PBD-CO-2.0 2,0µ/ 10ml COOH 148,30 

PBD-CO-20.0 20,0µ/ 10ml COOH 152,90 

PBD-CO-30.0 30,0µ/ 10ml COOH 168,70 

PBD-CO-100.0 100,0µ/ 10ml COOH 184,00 

PBD-AG-2.0 2,0µ/ 1ml Collagen 184,00 




PBD-GF-0.25 0,25µ/ 5ml fluo-green 180,00 





PBD-RF-0.25 0,25µ/ 5ml fluo-red 180,00 





PBD-R-0.25 0,25µ/ 10ml red 225,00 

PBD-R-2.0 2,0µ/ 10ml red 184,00 

PBD-R-30.0 30,0µ/ 10ml red 204,50 

PBD-R-100.0 100,0µ/ 10ml red 225,00 

PBD-B-0.25 0,25µ/ 10ml blue 225,00 

PBD-B-2.0 2,0µ/ 10ml blue 184,00 

PBD-B-30.0 30,0µ/ 10ml blue 204,50 

PBD-B-100.0 100,0µ/ 10ml blue 225,00 

Alumina Particles 



Our uniform monodisperse alumina nanospheres and microspheres have been used in various 

applications due to the size uniformity, the high degree of particle sphericity (as result, high flowability 

and high packing density) 

properties of alumina: such as high thermal conductivity, heat resistance, hardness etc. 

These particles often used as a fillers with high thermal conductivity, for example, those fillers for 

thermal conductivity sheets 

specifications:insoluble in organic solvents 

specific gravity 3.75-3.69g/cm3 

structure crystalline, alpha-Al2O3 Corundum phase 

surface area less than 2-3m2/g, non-porous. 

supplied in deionized water 50mg/ml w/v 


PAl-0,1 0,1µ/ 10ml plain 398,00 

PAl-0.5 0.5µ/ 10ml plain 298,00 

PAl-1.0 1.0µ/ 10ml plain 370,00 

PAl-2,5 2,5µ/10ml plain 370,00 

PAl-3.0 3,0µ/ 10ml plain 370,00 

PAl-3.5 3,5µ/ 10ml plain 370,00 

PAl-4,0 4,0µ/10ml plain 370,00 

PAl-4.5 4,5µ/ 10ml plain 420,00 

PAl-7.0 7,0µ/ 10ml plain 420,00 

PAl-8,0 8,0µ/10ml plain 420,00 

PAl-9.0 9,0µ/ 10ml plain 420,00 

PAl-10.0 10,0µ/ 10ml plain 470,00 

PAl-15.0 15,0µ/ 10ml plain 470,00 

PAl-20.0 20,0µ/ 10ml plain 470,00 

PAl-30.0 30,0µ/ 10ml plain 470,00 

PAl-40.0 40,0µ/ 10ml plain 470,00 

PAl-50.0 50,0µ/ 10ml plain 470,00 

Top of Page 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 





Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 





& DNA 

Measurement 





These monodisperse silica particles with a density of 2,0g/cm3 are simple to dispense and to separate. While polystyrene 

particles (d= 1,04) are difficult to separate by centrifugation under a size of 0,5 µ, silica particles do set down easy and are easy 

to resuspend. The silica particles are stabel in water and organic solvents, produced under a new dying method. Silca particles 


oligopeptides, proteines, lectines and antibodies. 


























file:///F|/Kisker/Kisker/micro_silicia.htm (1 von 10) [08.12.2005 22:31:38]












PSi-0.2NH2 0.2µ/ 5ml NH2 74,15 

PSi-0.3NH2 0.3µ/ 5ml NH2 74,15 

PSi-0.35NH2 0,35µ/ 5ml NH2 74,15 

PSi-0.4NH2 0.4µ/ 5ml NH2 74,15 

PSi-0.5NH2 0,5µ/ 5ml NH2 74,15 

PSi-0.8NH2 0,8µ/ 5ml NH2 81,80 

PSi-1.0NH2 1,0µ/ 5ml NH2 81,80 

PSi-1.5NH2 1,5µ/ 5ml NH2 81,80 

PSi-3.0NH2 3,0µ/ 5ml NH2 81,80 

PSi-4.0NH2 4.0µ/ 5ml NH2 81,80 

PSi-5.0NH2 5,0µ/ 5ml NH2 81,80 

PSi-10.0NH2 10.0µ/ 5ml NH2 89,50 

PSi-15.0NH2 15,0µ/ 5ml NH2 99,70 

PSi-20.0NH2 20,0µ/ 5ml NH2 107,35 



























































Silica Particles, plain, fluorescent-green, Excitation/Emmission: 485/510nm 












Silica Particles, Amino modified, fluorescent-green, Excitation/Emmission: 485/510nm 























































Here we offer hollow glass beads of different sizes. PGBH-11 and PGH-18 are made from boresilicat, non porous, chemical inert 

and appears as white powder. 



PBGH-11 11µ/1,1g/cm3 5g 19,90 

PBGH-18 18µ/0,6g/cm3 5g 19,90 

PBGH-10 0,5-10µ/2,5g/cm3 10g 19,90 

Glass Beads 

This serie of glass beads is designed for applications where inorganic beads with high density are required. The glass beads are 

manufactured from high pure raw materials and have a pure and shining surface. The density is 2,5 g/cm3, chemical 


250 µ = 95%. For your convenience we have listed in the table the nominal number of beads/g. This number is a guideline only. 







We also can offer on request Zirconium silicate (density 3,8g/cm3) and Zirconium silicate, Yttrium stabilized ( density 6,0g/cm3). 

These beads are used as grinding media in pest controlo, cosmetics and pharmaceutical industry. 


PGB-05 10 - 50µ 50g 2,4 x 10E7 20,40 



PGB-07 40 - 70µ 50g 7,0 x 10E6 20,40 

PGB-011 70-110µ 50g 1,0 x 10E6 20,40 

PGB-015 90-150µ 50g 7,0 x 10E5 20,40 

PGB-020 100-200µ 100g 2,8 x 10E5 20,40 

PGB-025 150-250µ 100g 6,2 x 10E4 20,40 

PGB-030 200-300µ 100g 95.000 20,40 

PGB-040 300-400µ 100g 21.000 20,40 

PGB-050 250-500µ 100g 14.500 20,40 

PGB-060 400-600µ 100g 6.000 27,60 

PGB-075 500-750µ 100g 3.100 27,60 

PGB-100 750-1.000µ 100g 1.500 27,60 

PGB-125 1.00-1.25 mm 100g 760 27,60 

PGB-155 1.25-1.55 mm 200g 220 16,60 

PGB-185 1.55-1.85 mm 200g 191 16,60 

PGB-200 1.70-2.00 mm 200g 95 16,60 

PGB-230 2.00-2.30 mm 200g 86 16,60 

PGB-260 2.30-2.60 mm 200g 48 16,60 

PGB-285 2.50-2.80 mm 200g 39 16,60 

PGB-330 2.85-3.30 mm 200g 28 16,60 

PGB-380 3.30-3.80 mm 200g 19 16,60 

PGB-430 3.80-4.30 mm 200g 12 16,60 




The density is 2,5 g/cm3, chemical characterisation: soda lime glass 69.2% SiO2, 11.4% K2O, 6.85% Na2O, 5.98% BaO, 2.45% 

CaO, 41% Al2O3, 9% CaO, 0.95 TiO2, 0.95 ZnO, 0,48% B2O3, 0.25%Sb2O3, 0,014%Fe2O3. For your convenience we have 

listed in the table the nominal number of beads/kg. This number is a guideline only. 




PGBP-08 0,8 mm 500 beads 1.492.000 49,00 

PGBP-1 1,0 mm 500 beads 763.900 49,00 


PGBP-2 2,0 mm 500 beads 49,00 


PGBP-3 3,0 mm 500 beads 28.300 55,00 


PGBP-4 4,0 mm 500 beads 12.300 55,00 


PGBP-5 5,0 mm 500 beads 6.100 59,00 


PGBP-6 6,0 mm 500 beads 59,00 


PGBP-7 7,0 mm 200 beads 2.220 49,00 




PGBP-8 8,0 mm 200 beads 1.490 69,00 


PGBP-9 9,0 mm 200 beads 1.040 69,00 


PGBP-10 10,0 mm 100 beads 48,00 


PGBP-11 11,0 mm 100 beads 57,00 


PGBP-12 12,0 mm 100 beads 75,00 





between 10% and 20% depending on size ) and are available from 2nm to 250nm. They are supplied in 

100ml solution at optical density of 1.0, measured at 520nm. The number of particles/ml is given in the 




PGO-2 2nm 15,0 x 10 13 210,00 

PGO-5 5nm 5,0 x 10 13 210,00 

PGO-10 10nm 5,7 x 10 12 210,00 

PGO-15 15nm 1,4 x 10 12 210,00 

PGO-20 20nm 7,0 x 10 11 210,00 

PGO-30 30nm 2,0 x 10 11 210,00 

PGO-40 40nm 9,0 x 10 10 210,00 

PGO-50 50nm 4,5 x 10 10 210,00 

PGO-60 60nm 2,6 x 10 10 210,00 

PGO-80 80nm 1,1 x 10 10 210,00 

PGO-100 100nm 5,6 x 10 9 210,00 

PGO-150 150nm 1,7 x 10 9 210,00 

PGO-200 200nm 7,0 x 10 8 210,00 

PGO-250 250nm 3,6 x 10 8 210,00 


It is necessary to use "biodegradable particles" in a lot applications. Our particles are made from polylactide with a 

denmsity of 1,02. They are supplied in 1% aqueous suspension (10 mg/ml) and are stable at neutral pH for at least 3 

monthes. Degradation starts through basic or acid pH or enzymatic hydrolysis. The particles are available in a variety 

of sizes, chemistries and fluorescent colors. 


PBD-0.25 0,25µ/ 10ml plain 127,30 

PBD-2.0 2,0µ/ 10ml plain 101,70 

PBD-20.0 20,0µ/ 10ml plain 112,00 

PBD-30.0 30,0µ/ 10ml plain 117,00 



PBD-100.0 100,0µ/ 10ml plain 122,20 

PBD-NH-0.25 0,25µ/ 10ml NH2 184,00 

PBD-NH-2.0 2,0µ/ 10ml NH2 148,30 

PBD-NH-20.0 20,0µ/ 10ml NH2 152,90 

PBD-NH-30.0 30,0µ/ 10ml NH2 168,70 

PBD-NH-100.0 100,0µ/ 10ml NH2 184,00 

PBD-CO-0.25 0,25µ/ 10ml COOH 184,00 

PBD-CO-2.0 2,0µ/ 10ml COOH 148,30 

PBD-CO-20.0 20,0µ/ 10ml COOH 152,90 

PBD-CO-30.0 30,0µ/ 10ml COOH 168,70 

PBD-CO-100.0 100,0µ/ 10ml COOH 184,00 















PBD-R-0.25 0,25µ/ 10ml red 225,00 

PBD-R-2.0 2,0µ/ 10ml red 184,00 

PBD-R-30.0 30,0µ/ 10ml red 204,50 

PBD-R-100.0 100,0µ/ 10ml red 225,00 

PBD-B-0.25 0,25µ/ 10ml blue 225,00 

PBD-B-2.0 2,0µ/ 10ml blue 184,00 

PBD-B-30.0 30,0µ/ 10ml blue 204,50 

PBD-B-100.0 100,0µ/ 10ml blue 225,00 




Our uniform monodisperse alumina nanospheres and microspheres have been used in various 

applications due to the size uniformity, the high degree of particle sphericity (as result, high flowability 

and high packing density) 

properties of alumina: such as high thermal conductivity, heat resistance, hardness etc. 

These particles often used as a fillers with high thermal conductivity, for example, those fillers for 

thermal conductivity sheets 







PAl-0,1 0,1µ/ 10ml plain 398,00 

PAl-0.5 0.5µ/ 10ml plain 298,00 

PAl-1.0 1.0µ/ 10ml plain 370,00 

PAl-2,5 2,5µ/10ml plain 370,00 

PAl-3.0 3,0µ/ 10ml plain 370,00 

PAl-3.5 3,5µ/ 10ml plain 370,00 

PAl-4,0 4,0µ/10ml plain 370,00 

PAl-4.5 4,5µ/ 10ml plain 420,00 

PAl-7.0 7,0µ/ 10ml plain 420,00 

PAl-8,0 8,0µ/10ml plain 420,00 

PAl-9.0 9,0µ/ 10ml plain 420,00 

PAl-10.0 10,0µ/ 10ml plain 470,00 

PAl-15.0 15,0µ/ 10ml plain 470,00 

PAl-20.0 20,0µ/ 10ml plain 470,00 

PAl-30.0 30,0µ/ 10ml plain 470,00 

PAl-40.0 40,0µ/ 10ml plain 470,00 

PAl-50.0 50,0µ/ 10ml plain 470,00 

Top of Page 




P.O. Box 1329 


Germany 

Back to the website Start printing 

Micoparticles 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


These monodisperse silica particles with a density of 2,0g/cm3 are simple to dispense and to 

separate. While polystyrene particles (d= 1,04) are difficult to separate by centrifugation under a 

size of 0,5 µ, silica particles do set down easy and are easy to resuspend. The silica particles are 

stabel in water and organic solvents, produced under a new dying method. Silca particles are 

easy to functionalize and available as fluorescent particles. They are useful for coupling of DNA, 

oligonucleotides, oligopeptides, proteines, lectines and antibodies. 

The fluorescent silica-particles are also available with different functional groups as-NH2, and - 

COOH. 

Non fluorescent silica particles are also available with e.g.albumin, protein A, epoxy, NHS, NTA, 

EDTA and others. Please ask for quotation. 















file:///F|/Kisker/Kisker/micro_silicia_d.htm (1 von 15) [08.12.2005 22:31:40]




















PSi-0.2NH2 0.2µ/ 5ml NH2 74,15 

PSi-0.3NH2 0.3µ/ 5ml NH2 74,15 

PSi-0.35NH2 0,35µ/ 5ml NH2 74,15 

PSi-0.4NH2 0.4µ/ 5ml NH2 74,15 

PSi-0.5NH2 0,5µ/ 5ml NH2 74,15 

PSi-0.8NH2 0,8µ/ 5ml NH2 81,80 

PSi-1.0NH2 1,0µ/ 5ml NH2 81,80 

PSi-1.5NH2 1,5µ/ 5ml NH2 81,80 

PSi-3.0NH2 3,0µ/ 5ml NH2 81,80 

PSi-4.0NH2 4.0µ/ 5ml NH2 81,80 



PSi-5.0NH2 5,0µ/ 5ml NH2 81,80 

PSi-10.0NH2 10.0µ/ 5ml NH2 89,50 

PSi-15.0NH2 15,0µ/ 5ml NH2 99,70 

PSi-20.0NH2 20,0µ/ 5ml NH2 107,35 



























































Silica Particles, plain, fluorescent-green, Excitation/Emmission: 

485/510nm 












Silica Particles, Amino modified, fluorescent-green, 

Excitation/Emmission: 485/510nm 




























Silica Particles, Amino modified, fluorescent red, Excitation/Emmission: 

569/585nm 





























Here we offer hollow glass beads of different sizes. PGBH-11 and PGH-18 are made from 

boresilicat, non porous, chemical inert and appears as white powder. 



PBGH-11 11µ/1,1g/cm3 5g 19,90 

PBGH-18 18µ/0,6g/cm3 5g 19,90 



PBGH-10 0,5-10µ/2,5g/cm3 10g 19,90 

Glass Beads 

This serie of glass beads is designed for applications where inorganic beads with high density are 

required. The glass beads are manufactured from high pure raw materials and have a pure and 

shining surface. The density is 2,5 g/cm3, chemical characterisation is 72% SiO2, 13% Na2O, 

9% CaO. The glass beads are PbO free. The glass beads are mainly round above 250 µ = 95%. 

For your convenience we have listed in the table the nominal number of beads/g. This number is 

a guideline only. 







We also can offer on request Zirconium silicate (density 3,8g/cm3) and Zirconium silicate, Yttrium 

stabilized ( density 6,0g/cm3). These beads are used as grinding media in pest controlo, 

cosmetics and pharmaceutical industry. 


PGB-05 10 - 50µ 50g 2,4 x 10E7 20,40 

PGB-07 40 - 70µ 50g 7,0 x 10E6 20,40 

PGB-011 70-110µ 50g 1,0 x 10E6 20,40 

PGB-015 90-150µ 50g 7,0 x 10E5 20,40 

PGB-020 100-200µ 100g 2,8 x 10E5 20,40 

PGB-025 150-250µ 100g 6,2 x 10E4 20,40 

PGB-030 200-300µ 100g 95.000 20,40 

PGB-040 300-400µ 100g 21.000 20,40 

PGB-050 250-500µ 100g 14.500 20,40 

PGB-060 400-600µ 100g 6.000 27,60 

PGB-075 500-750µ 100g 3.100 27,60 

PGB-100 750-1.000µ 100g 1.500 27,60 

PGB-125 1.00-1.25 mm 100g 760 27,60 

PGB-155 1.25-1.55 mm 200g 220 16,60 

PGB-185 1.55-1.85 mm 200g 191 16,60 

PGB-200 1.70-2.00 mm 200g 95 16,60 



PGB-230 2.00-2.30 mm 200g 86 16,60 

PGB-260 2.30-2.60 mm 200g 48 16,60 

PGB-285 2.50-2.80 mm 200g 39 16,60 

PGB-330 2.85-3.30 mm 200g 28 16,60 

PGB-380 3.30-3.80 mm 200g 19 16,60 

PGB-430 3.80-4.30 mm 200g 12 16,60 


This serie of glass beads are made in high precision with diameter deviation of 20 nm only. They 

have an very high grade of roundness and are polished fine matt. 

The density is 2,5 g/cm3, chemical characterisation: soda lime glass 69.2% SiO2, 11.4% K2O, 

6.85% Na2O, 5.98% BaO, 2.45% CaO, 41% Al2O3, 9% CaO, 0.95 TiO2, 0.95 ZnO, 0,48% 

B2O3, 0.25%Sb2O3, 0,014%Fe2O3. For your convenience we have listed in the table the 

nominal number of beads/kg. This number is a guideline only. 

These beads are also available on request in Borosilicate glass and as solid colored glas 

transparent or opaque. 



PGBP-08 0,8 mm 500 beads 1.492.000 49,00 

PGBP-1 1,0 mm 500 beads 763.900 49,00 


PGBP-2 2,0 mm 500 beads 49,00 


PGBP-3 3,0 mm 500 beads 28.300 55,00 


PGBP-4 4,0 mm 500 beads 12.300 55,00 


PGBP-5 5,0 mm 500 beads 6.100 59,00 


PGBP-6 6,0 mm 500 beads 59,00 


PGBP-7 7,0 mm 200 beads 2.220 49,00 




PGBP-8 8,0 mm 200 beads 1.490 69,00 


PGBP-9 9,0 mm 200 beads 1.040 69,00 


PGBP-10 10,0 mm 100 beads 48,00 


PGBP-11 11,0 mm 100 beads 57,00 


PGBP-12 12,0 mm 100 beads 75,00 



Our Gold Particles are of highest quality and can be used in production 

of diagnostic tests as well as conjugation studies of proteins and 

antibodies. The particles have a very narrow size distribution ( CV 

between 10% and 20% depending on size ) and are available from 2nm 

to 250nm. They are supplied in 100ml solution at optical density of 1.0, 

measured at 520nm. The number of particles/ml is given in the 




PGO-2 2nm 15,0 x 10 13 210,00 

PGO-5 5nm 5,0 x 10 13 210,00 

PGO-10 10nm 5,7 x 10 12 210,00 

PGO-15 15nm 1,4 x 10 12 210,00 

PGO-20 20nm 7,0 x 10 11 210,00 

PGO-30 30nm 2,0 x 10 11 210,00 

PGO-40 40nm 9,0 x 10 10 210,00 

PGO-50 50nm 4,5 x 10 10 210,00 

PGO-60 60nm 2,6 x 10 10 210,00 

PGO-80 80nm 1,1 x 10 10 210,00 

PGO-100 100nm 5,6 x 10 9 210,00 

PGO-150 150nm 1,7 x 10 9 210,00 



PGO-200 200nm 7,0 x 10 8 210,00 

PGO-250 250nm 3,6 x 10 8 210,00 


It is necessary to use "biodegradable particles" in a lot applications. Our particles are 

made from polylactide with a denmsity of 1,02. They are supplied in 1% aqueous 

suspension (10 mg/ml) and are stable at neutral pH for at least 3 monthes. Degradation 

starts through basic or acid pH or enzymatic hydrolysis. The particles are available in a 

variety of sizes, chemistries and fluorescent colors. 


PBD-0.25 0,25µ/ 10ml plain 127,30 

PBD-2.0 2,0µ/ 10ml plain 101,70 

PBD-20.0 20,0µ/ 10ml plain 112,00 

PBD-30.0 30,0µ/ 10ml plain 117,00 

PBD-100.0 100,0µ/ 10ml plain 122,20 

PBD-NH-0.25 0,25µ/ 10ml NH2 184,00 

PBD-NH-2.0 2,0µ/ 10ml NH2 148,30 

PBD-NH-20.0 20,0µ/ 10ml NH2 152,90 

PBD-NH-30.0 30,0µ/ 10ml NH2 168,70 

PBD-NH-100.0 100,0µ/ 10ml NH2 184,00 

PBD-CO-0.25 0,25µ/ 10ml COOH 184,00 

PBD-CO-2.0 2,0µ/ 10ml COOH 148,30 

PBD-CO-20.0 20,0µ/ 10ml COOH 152,90 

PBD-CO-30.0 30,0µ/ 10ml COOH 168,70 

PBD-CO-100.0 100,0µ/ 10ml COOH 184,00 

















PBD-R-0.25 0,25µ/ 10ml red 225,00 

PBD-R-2.0 2,0µ/ 10ml red 184,00 

PBD-R-30.0 30,0µ/ 10ml red 204,50 

PBD-R-100.0 100,0µ/ 10ml red 225,00 

PBD-B-0.25 0,25µ/ 10ml blue 225,00 

PBD-B-2.0 2,0µ/ 10ml blue 184,00 

PBD-B-30.0 30,0µ/ 10ml blue 204,50 

PBD-B-100.0 100,0µ/ 10ml blue 225,00 




Our uniform monodisperse alumina nanospheres and microspheres 

have been used in various applications due to the size uniformity, the 

high degree of particle sphericity (as result, high flowability and high 

packing density) 

properties of alumina: such as high thermal conductivity, heat 

resistance, hardness etc. 

These particles often used as a fillers with high thermal conductivity, 

for example, those fillers for thermal conductivity sheets 







PAl-0,1 0,1µ/ 10ml plain 398,00 

PAl-0.5 0.5µ/ 10ml plain 298,00 

PAl-1.0 1.0µ/ 10ml plain 370,00 

PAl-2,5 2,5µ/10ml plain 370,00 

PAl-3.0 3,0µ/ 10ml plain 370,00 

PAl-3.5 3,5µ/ 10ml plain 370,00 

PAl-4,0 4,0µ/10ml plain 370,00 

PAl-4.5 4,5µ/ 10ml plain 420,00 

PAl-7.0 7,0µ/ 10ml plain 420,00 

PAl-8,0 8,0µ/10ml plain 420,00 

PAl-9.0 9,0µ/ 10ml plain 420,00 

PAl-10.0 10,0µ/ 10ml plain 470,00 

PAl-15.0 15,0µ/ 10ml plain 470,00 

PAl-20.0 20,0µ/ 10ml plain 470,00 

PAl-30.0 30,0µ/ 10ml plain 470,00 

PAl-40.0 40,0µ/ 10ml plain 470,00 

PAl-50.0 50,0µ/ 10ml plain 470,00 

Top of page Back to the website 



Copyright © 1999-2005 Dipl.oec.troph.Gerlinde Kisker | e-mail: contact@kisker-biotech.com 


Polystyrene-/ Coated-/ Flow Cytometry-/ PMMA-/ Melamine-/ NIST Paricles 




Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 





Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 







Some polystyrene particles can be offered with special coatings, please ask for 

quotation. 

Cat. # size/quantity/concentration chemistry Euro 

PPs-0.05 0,05µ/ 15ml / 2,5% plain 60,80 

PPs-0.1 0,1µ/ 15ml / 2,5% plain 50,10 

PPs-0.2 0,2µ/ 15ml / 2,5% plain 50,10 

PPs-0.4 0,4µ/ 15ml / 2,5% plain 50,10 

PPs-0.6 0,6µ/ 15ml / 2,5% plain 50,10 

PPs-0.8 0,8µ/ 15ml / 2,5% plain 55,75 

PPs-1.0 1,0µ/ 15ml / 2,5% plain 60,80 

PPs-2.0 2,0µ/ 10ml / 2,5% plain 79,80 

PPs-3.0 3,0µ/ 10ml / 2,5% plain 95,80 

PPs-4.0 4,0µ/ 5ml / 2,5% plain 76,20 

PPs-6.0 6,0µ/ 5ml / 2,5% plain 76,20 

PPs-8.0 8,0µ/ 5ml / 2,5% plain 76,20 

PPs-10.0 10,0µ/ 5ml / 2,5% plain 95,80 

PPs-12.0 12,0µ/ 5ml / 2,5% plain 95,80 

PPs-15.0 15,0µ/ 5ml 2,5% plain 95,80 

PPs-30.0 30,0µ/ 25ml / 5,0% plain 230,00 

PPs-65.0 65,0µ/ 25ml / 5,0% plain 230,00 

Polystyrene microparticles , carboxylated 

file:///F|/Kisker/Kisker/micro_polyst.htm (1 von 13) [08.12.2005 22:31:45] 



& DNA 

Measurement 




Magnetic Particles


Monodisperse polystyrene microparticles, which contain carboxyl groups at the surface. 

They are used for passive adsorption or covalent binding of proteins. 


PPs-0.05COOH 0,05µ/ 15ml / 5,0% COOH 135,00 












Polystyrene microparticles , amino 




PPs-0.2NH2 0,2µ/ 10ml / 2,5% NH2 129,00 

PPs-0.5NH2 0,5µ/ 10ml / 5,0% NH2 129,00 

PPs-0.8NH2 0,8µ/ 10ml / 5,0% NH2 129,00 

PPs-1.0NH2 1,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.0NH2 2,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.5NH2 2,5µ/ 10ml / 5,0% NH2 145,00 

PPs-3.0NH2 3,0µ/ 10ml / 5,0% NH2 149,00 

PPs-3.5NH2 3,5µ/ 10ml / 5,0% NH2 149,00 

PPs-7.0NH2 6,0-7,9µ/ 10ml / 5,0% NH2 195,00 


file:///F|/Kisker/Kisker/micro_polyst.htm (2 von 13) [08.12.2005 22:31:45]


These particles have CV under 5% and can be used to check ot calibrate particel-sizesystems. 

Cat. # size/quantity chemistry Euro 

PPs-6.0P 6,0µ/ 1000mg plain 269,00 

PPs-8.0P 8,0µ/ 1000mg plain 269,00 

PPs-12.0P 12,0µ/ 1000mg plain 269,00 

PPs-20.0P 20,0µ/ 1000mg plain 269,00 






Cat. # size Quantity/Conc. chemistry Euro 

PPsB-0.5 0,4-0,06µ 10ml/5%w/v plain 119,00 

PPsB-7.0 6,0-7.9µ 5ml/1%w/v plain 135,00 

PPsB-0.1COOH 0,1-0.19µ 10ml/5%w/v COOH 135,00 







IgG coated polystyrene particles are prepared by using passive adsorption, the coated particles are stable for several 







Cat. # Description Sizeµ/ unit % w/v Euro 

PC-Fc-0.8 Goat Anti-mouse IgG polystyrene,affin.pur., Fc specific 0,7-0,9/20ml 0,25 229,00 

PC-HL-0.8 Goat Anti-mouse IgG polystyrene,affin.pur., H & L 0,7-0,9/20ml 0,25 229,00 

PC-CAHL-0.8 

PC-CAR-0.8 

Goat Anti-mouse IgG poly.,affin.pur./cross 

absorbed,H&L 


absorbed,H&L 

0,7-0,9/20ml 0,25 249,00 

0,7-0,9/20ml 0,25 249,00 

PC-Fc-3.0 Goat Anti-mouse IgG (Fc) polystyrene 3,0-3,9/ 5ml 0,5 273,10 


PCAH-HL-0.8 Goat Anti-Human IgG (H&L) polystyrene 0,7-0,9/ 5ml 0,25 149,00 





PC-A-0.7 Avidine-polystyrene 0,7-0,9/10ml 5 319,00 


PC-A-3.0 Avidine-polystyrene 3,0-3,9/5ml 0,5 239,00 

PC-A-6.0 Avidine-polystyrene 6,0-8,0/ 5ml 0,5 239,00 

PC-S-0.3 Streptavidine-polystyrene 0,3-0,39/10ml 1 249,00 



PC-S-1.5 Streptavidine-polystyrene 1,5-1,9/ 5ml 1 249,00 

PC-S-3.0 Streptavidine-polystyrene 3,0-3,9/ 5ml 0,5 258,60 







PC-B-0.8 Biotin-polystyrene 0,7-0,9/ 10ml 1 249,60 

PC-B-3.0 Biotin-polystyrene 3,0-3,9/ 5ml 0,5 278,60 


PC-IMB-6.0 Imminobiotin-polystyrene 6,0-8,6/ 5ml 1 315,85 

PC-PA-0.8 Protein A-polystyrene 0,7-0,9/5ml 1 189,00 






PC-AFY-0.5 Avidin yellow 0,4-0,6/ 5ml 0,1 159,00 

PC-AFP-0.5 Avidin pink 0,4-0,6/ 5ml 0,1 159,00 

PC-AFU-0.5 Avidin purple 0,4-0,6/ 5ml 0,1 159,00 


PC-AFN-0.8 Avidin nile red 0,7-0,9/ 5ml 0,1 159,00 




PC-AFSB-0.8 Avidin Sky Blue 0,7-0,9/ 5ml 0,1 159,00 

PC-AFITC-1.7 Avidin FITC 1,7-2,2/ 5ml 0,1 199,00 


PC-AM-FY-0.8 Anti mouse yellow IgG H&L 0,7-0,9/ 5ml 0,1 159,00 

PC-AM-FP-0.8 Anti mouse pink IgG H&L 0,7-0,9/ 5ml 0,1 159,00 

PC-AM-FU-0.8 Anti mouse purple IgG H&L 0,7-0,9/ 5ml 0,1 159,00 

PC-AM-FN-0.8 Anti mouse nile red IgG H&L 0,7-0,9/ 5ml 0,1 159,00 







PC-AM-FcFY-2.5 Anti mouse yellow IgG (FC) 2,5-4,5/ 5ml 0,1 219,00 

PC-AM-FcFP-2.5 Anti mouse pink IgG (Fc) 2,5-4,5/ 5ml 0,1 219,00 

PC-AM-FcFN-2.5 Anti mouse niole red IgG (Fc) 2,5-4,5/ 5ml 0,1 219,00 

PC-BFY-0.5 Biotin yellow 0,4-0,6/ 5ml 0,1 159,00 

PC-BFN-0.5 Biotin nile red 0,4-0,6/ 5ml 0,1 159,00 

PC-BFP-0.8 Biotin pink 0,7-0,9/ 5ml 0,1 159,00 


PC-BFB-3.0 Biotin blue 3,0-3,9/ 5ml 0,1 199,00 





PC-PAFY-0.5 Protein A yellow 0,4-0,6/ 5ml 0,1 199,00 

PC-PAFN-0.5 Protein A red 0,4-0,6/ 5ml 0,1 199,00 

PC-PAFP-0.5 Protein A pink 0,4-0,6/ 5ml 0,1 199,00 





The Fluorescent Particles are prepared by either staining the Polystyrene with the fluorophore or by polymerizing the fluorophore 

in styrene in the presence of polystyrene particles. A wide varity of fluorescent particles can be prepared ranging in size, type of 

fluorophore, fluorecent intensity and surface functional groups. Most of the used fluorophores are waterinsoluble and therefore 

very stable. These fluorophores incorporated into the particles do not leach and their color and fluorescence remains stable for a 

long time under proper storage conditions. 




Ex/Em max 

(nm) 

Particle type EX(nm) filter EM(nm) filter Compatible fluorophores 


470/480 Yellow 470 – 490 520 FITC 










The FITC labeled polystyrene particles can be used as calibration particles for flow cytometry. They can also be used to cross 



bottle. 

Cat. # Type & Color Size in µ % w/v packsize Euro 

PFITC-0.8 FITC 0,7 –0,9 0,1 2ml 175,00 

PFITC-2.0 FITC 2,0 - 2,9 0,1 2ml 175,00 

PFITC-3.0 FITC 3,0 – 3,9 0,1 2ml 187,00 

PFITC-5.0 FITC 5,0 – 5,9 0,1 2ml 198,00 

PFITC-7.0 FITC 7,0 – 7,9 0,1 2ml 214,00 

PFITC-8.0 FITC 8,0 – 8,9 0,1 2ml 214,00 





Rainbow Calibration Particles are a mixture of fluorophores that allows exitation at any wavelength from 365 to 650nm. It 

enables calibration of all channels of the flow cytometer with same set of particles in similiar size, but with different intensities. 

Rainbow Fluorescent Particles are similiar to the above described, exept these represent single peak, uniform size particles. 

The Rainbow fluorescent Particles are usually the brightest peak of the corresponding Calibration Particles with the exeption of P- 

RFPM-3.0, which has fluorescent intensity of the stained cells. Since these particles contain single peak with very small 

flluorescence and size CV, they are very useful in the alignment of the optical system of the flow cytometer. 

Yellow Calibration Particles are designed for routine calibration of the fluorescin channel. They contain a set of similiar size 

Yellow Particles with different fluorescence intensities. 




Allophycocyanin Calibration Particles contain a mixture of 3.0µ fluorescent particles with different intensity in Allophycocyanin 

channel and can be exited with either a He-Ne laser at 632 nm or a diode laser at 635nm. 

Blank Calibration Particles are the blank peak of the corresponding Rainbow Calibration Particles. These particles can be 

used to set the threshold of the instrument in each channel. 

Cat. # Rainbow Calibration particles Sizeµ/ unit Euro 

P-RCP-2.0 4 peaks 1,8-2,2/ 5ml 285,85 

P-RCP-3.0 6 peaks 3,0-3,4/ 5ml 299,85 

P-RCP8-3.0 8 peaks 3,0-3,4/ 5ml 299,85 

P-RCP-3.5 4 peaks 3,5-4,0/ 5ml 299,85 

P-RCP-6.0 6 peaks 6,0-6,5/ 5ml 315,60 

P-RCP-7.0 5 peaks 6,5-8,0/ 5ml 315,60 


P-RFP-2.0 Brightest peak in P-RCP-2.0 1,8-2,2/ 5ml 265,85 


P-RFPM-3.0 Mid range FL1 fluorescence 3,0-3,4/ 5ml 288,85 




P-YCP-7.0 Yellow Calibration particles, 5 peaks 6,5-8.0/ 5ml 315,60 

P-RLCP-3.0 Rainbow Linear Calibration particles, 5 peaks 3,0-3,4/ 5ml 299,20 

P-ACP-3.0 Allophycocyanin Calibration particles 3,0-3,4/ 2x5ml 299,85 




P-BCP-2.0 Blank Peak in P-RCP-2.0 1,8-2,2/ 5ml 152,85 








Particles. 






The Yellow Fluorescent Particle Kits consist of 2,8µ and 3,6µ Yellow Fluorescent Particles in multiple fluorescence intensities in 

FITC channels. These two kits can be used to develop multiplex assays using either PE or PE-Cy5 tracers for detection. 

Cat. # Description % w/v / pack size Euro 

P-PO3.6Kit Pink-odd 6 peaks, 3,6µ 0,5% / 6 x 1ml 572,60 

P-PE3.6Kit Pink even 6 peaks, 3,6µ 0,5% / 6 x 1ml 572,60 

P-GAMPO3.6Kit Goat-anti-Mouse Pink-odd 6 peaks, 3,6µ 0,1% / 6 x 1ml 572,60 

P-GAMPE3.6Kit Goat-anti-Mouse Pink-even 6 peaks, 3,6µ 0,1% / 6 x 1ml 572,60 

P-CPO2.8Kit Carboxyl Pink-odd 6 peaks, 2,8µ 0,25% / 6 x 1ml 572,60 

P-CPE2.8Kit Carboxyl Pink-even 6 peaks, 2,8µ 0,25% / 6 x 1ml 572,60 

P-S-AO2.8Kit S-Avidin Pink-odd 6 peaks, 2,8µ 0,1% / 6 x 1ml 572,60 

P-S-AE2.8Kit S-Avidin Pink-odd 6 peaks, 2,8µ 0,1% / 6 x 1 ml 572,60 

P-YO2.8Kit Yellow-odd 6 peaks, 2,8µ 0,5% / 6 x 1 ml 572,60 

P-YE2.8Kit Yellow-even 6 peaks, 2,8µ 0,5% / 6 x 1ml 572,60 

P-Y9-2.8Kit Yellow 9 peaks, 3,6µ 0,5% / 6 x 1ml 713,20 



PFP-00552 Yellow 0,04 –0,06 1 2ml 139,00 

PFP-0252 Yellow 0,1 – 0,3 1 2ml 139,00 

PFP-0245 Light yellow 0,1 – 0,3 1 2ml 139,00 

PFP-0552 Yellow 0,4 – 0,6 1 2ml 139,00 


PFP-0852 Yellow 0,7 – 0,9 1 2ml 139,00 


PFL-2045 Light yellow, low intensity 1,7 – 2,2 1 2ml 159,00 

PFP-2045 Light yellow, medium intensity 1,7 – 2,2 1 2ml 159,00 

PFH-2045 Light yellow, high intensity 1,7 – 2,2 1 2ml 159,00 

PFL-2052 Yellow, low intensity 1,7 – 2,2 1 2ml 159,00 

PFH-2052 Yellow, high intensity 1,7 – 2,2 1 2ml 159,00 



PFP-3052 Yellow 2,5 – 3,4 1 2ml 179,00 

PFP-4052 Yellow 3,5 – 4,5 1 2ml 179,00 

PFP-6052 Yellow 6,0 – 7,9 1 2ml 192,00 

PFP-10052 Yellow 10,0 – 14,0 1 2ml 235,00 

PFP-15052 Yellow 15,0 – 19,0 1 2ml 259,00 

PCFP-00546 Light yellow carboxylated 0,04 – 0,08 1 2ml 179,00 

PCFP-00552 Yellow carboxylated 0,04 – 0,08 1 2ml 179,00 




PCFL-0852 Yellow carboxylated, low intensity 0,7 – 0,9 1 2ml 179,00 


PCFH-5052 Yellow carboxylated, high intensity 5,0 – 5,9 0,5 2ml 192,00 

PCFP-5052 Yellow carbox., medium intensity 5,0 – 5,9 0,5 2ml 192,00 

PCFL-5052 Yellow carboxylated, low intensity 5,0 – 5,9 0,5 2ml 192,00 

PAFP-0252 Yellow amino 0,09 – 0,3 1 2ml 179,00 



Cat. # Type & Color Size in µ % w/v packsize Price Euro 

PFP-00556 Nile red 0,04 –0,06 1 2ml 139,00 

PFP-0256 Nile red 0,1 – 0,3 1 2ml 139,00 

PFP-0856 Nile red 0,7 – 0,9 1 2ml 139,00 

PFL-2056 Nile red, low intensity 1,7 – 2,2 1 2ml 159,00 

PFH-2056 Nile red, high intensity 1,7 – 2,2 1 2ml 159,00 

PFP-2056 Nile red 1,7 – 2,2 1 2ml 159,00 

PFP-3056 Nile red 2,5 – 3,4 1 2ml 179,00 

PFP-4056 Nile red 3,5 – 4,5 1 2ml 179,00 

PFP-6056 Nile red 6,0 – 7,9 1 2ml 192,00 


PFP-9056 Nile red 8,0 - 9,9 1 2ml 259,00 

PFH-10056 Nile red, high intensity 10,0 – 14,0 0,5 2ml 235,00 

PFP-10056 Nile red 10,0 – 14,0 1 2ml 235,00 

PFP-15056 Nile red 15,0 – 19,0 1 2ml 259,00 

PCFP-00556 Nile red carboxylated 0,04 – 0,08 1 2ml 189,00 




PCFH-5056 Nile red carbox., high intensity 5,0 – 5,9 0,5 2ml 199,00 

PCFP-5056 Nile red carbox., medium intensity 5,0 – 5,9 0,5 2ml 199,00 




PFP-00558 Pink 0,04 –0,06 1 2ml 139,00 

PFP-0558 Pink 0,4 – 0,6 1 2ml 139,00 

PFP-0858 Pink 0,7 – 0,9 1 2ml 139,00 

PFP-2058 Pink 1,7 – 2,2 1 2ml 159,00 

PFP-4058 Pink 2,5 – 4,5 1 2ml 179,00 

PFP-6058 Pink 6,0 – 7,9 1 2ml 192,00 

PCFP-00558 Pink carboxylated 0,04 – 0,08 1 2ml 179,00 




PCFH-5058 Pink carbox., high intensity 5,0 – 5,9 0,5 2ml 192,00 

PCFP-5058 Pink carbox., medium intensity 5,0 – 5,9 0,5 2ml 192,00 

PCFL-5058 Pink carbox., low intensity 5,0 – 5,9 0,5 2ml 192,00 

PAFP-5058 Pink amino 5,0 – 5,9 1 2ml 179,00 


PFP-00562 Purple 0,04 –0,06 1 2ml 139,00 

PFP-0262 Purple 0,1-0,3 1 2ml 139,00 

PFP-0562 Purple 0,4 – 0,6 1 2ml 139,00 

PFP-0862 Purple 0,7 – 0,9 1 2ml 139,00 

PFL-2062 Purple, low intensity 1,7 – 2,2 1 2ml 159,00 

PFP-2062 Purple, medium intensity 1,7 – 2,2 1 2ml 159,00 

PFH-2062 Purple, high intensity 1,7 – 2,2 1 2ml 159,00 

PFP-4062 Purple 2,5 – 4,5 1 2ml 179,00 

PCFP-0562 Purple carboxylated 0,4 – 0,6 1 2ml 179,00 




PFP-00570 Sky blue 0,04 –0,06 0,25 2ml 139,00 

PFP-0270 Sky blue 0,1-0,3 0,25 2ml 139,00 

PFP-0570 Sky blue 0,4 – 0,6 1,0 2ml 139,00 

PFP-0870 Sky blue 0,7 – 0,9 1 2ml 139,00 

PFP-2070 Sky blue 1,7 – 2,2 1 2ml 159,00 

PFH-2070 Sky blue, high intensity 1,7 – 2,2 0,2 2ml 159,00 

PFP-3070 Sky blue 2,5 – 3,4 0,2 2ml 179,00 

PFP-4070 Sky blue 3,5 – 4,5 0,2 2ml 179,00 

PFL-4070 Sky blue, low intensity 2,5 – 4,5 1,0 2ml 179,00 

PFP-15070 Sky blue 15,0-19,0 0,2 2ml 259,00 



PCFP-0570 Sky blue carboxylated 0,4 – 0,6 0,25 2ml 179,00 

PCFP-0870 Sky blue carboxylated 0,7 – 0,9 1 2ml 179,00 

These particles can also be offered as 10% suspension, when higher concentrations for production are necessarry. 



Cat.# size/quantity chemistry Euro 

PPMMA-10.0 10,0µ/ 15ml plain 340,00 



PPMMa-100.0 100,0µ/ 15ml plain 452,50 


In the following chapter we offer some beads of larger sizes but with relative narrow size distribution. The offered quantities are 

laboratory quantities and all beads can be offered as bulk quantities also. The beads are used for different applications, e. g. 

manufacturing of implatates( pmma-beads and pharmaceutical synthetic research (polystyrene beads). 

Cat. # size material quantity Euro 

PLPS-15 13 -18µ Polystyrene, crosslinked 10 ml/2.5% 219,00 

PLPS-40 38 - 45µ Polystyrene, crosslinked 10 ml/5.0% 169,00 





PLPM-100 50 -100µ PMMA 10g 29,00 

PLPM-125 125 - 250µ PMMA p.o.r. 

PLPM-300 200 - 400µ PMMA 10g 29,00 

PLPM-400 400 - 500µ PMMA 10g 29,00 

PLPM-600 500 - 600 µ PMMA 10g 29,00 

PLPM-800 700 - 1000µ PMMA 10g 29,00 



advantages depending on the application compared to polystyrene particles. They have a higher density ( 1,51g/cm3), are very 

stable, can be stored unlimited, can be resuspended in water, they do not quench in most organic solvents and are heat 

resistant up to 200°C. The melamine microparticles are hydrophilic and monodisperse in water (CV 1-2%). The refractive index 

is 1,68. 

Cat. # Size/ quantity chemistry Price: Euro 

PMa-1.0 1,0µ/ 750mg 210,00 

1,0µ/ 1,5g 395,00 

PMa-2.0 2,0µ/ 750mg 210,00 

2,0µ/ 1,5g 395,00 

PMa-3.0 3,0µ/ 750mg 210,00 

3,0µ/ 1,5g 395,00 

PMa-4.0 4,0µ/ 750mg 210,00 



4,0µ/ 1,5g 395,00 

PMa-5.0 5,0µ/ 750mg 249,00 

5,0µ/1,5g 473,00 

PMa-6.0 6,0µ/ 750mg 249,00 

6,0µ/ 1,5g 473,00 

PMa-7.0 7,0µ/ 750mg 249,00 

7,0µ/ 1,5g 473,00 

PMa-8.0 8,0µ/ 750mg 249,00 

8,0µ/ 1,5g 473,00 

PMa-9.0 9,0µ/ 750mg 249,00 

9,0µ/ 1,5g 473,00 

PMa-10.0 10,0µ/ 750mg 270,00 


10,0µ/ 1,5g 515,00 










Cat. # Size/ quantity dye Price: Euro 

PMaF-1.0 1,0µ/ 5ml FITC 255,00/5ml...439,00/15ml 

PMaRhB-1.0 1,0µ/ 5ml Rhodamine B 255,00/5ml...439,00/15ml 

PMaNB-1.0 1,0µ/ 5ml Nile blue 255,00/5ml...439,00/15ml 
































The particle size standards are supplied as 2% or 3% suspension in deionized water. The CV is depending on each size 

at 1 - 3,5% 


Cat. #. Size /quantity/concentration material Euro 

PNPs-0.1 0,1µ/10ml/2% Ps 210,00 

PNPs-0.5 0,5µ/10ml/2% Ps 210,00 

PNPs-1.0 1,0µ/10ml/2% Ps 210,00 

PNPs-1.5 1,5µ/10ml/2% Ps 259,00 

PNMf-2.0 2,0µ/10ml/2% Mf 259,00 

PNMf-2.5 2,5µ/10ml/2% Mf 259,00 

PNMf-3.0 3,0µ/10ml/2% Mf 259,00 

PNMf-3.5 3,5µ/10ml/2% Mf 259,00 

PNMf-4.0 4,0µ/10ml/2% Mf 259,00 

PNPs-4.0 4,0µ/10ml/2% Ps 259,00 

PNMf-4.5 4,5µ/10ml/2% Mf 259,00 

PNMf-5.0 5,0µ/10ml/2% Mf 259,00 

PNMf-5.5 5,5µ/10ml/2% Mf 259,00 

PNMf-6.0 6,0µ/10ml/2% Mf 259,00 

PNMf-7.0 7,0µ/10ml/2% Mf 259,00 

PNMf-8.0 8,0µ/10ml/2% Mf 259,00 

PNMf-9.0 9,0µ/10ml/2% Mf 259,00 

PNMf-10.0 10,0µ/10ml/2% Mf 295,00 

PNPs-15.0 15,0µ/20ml/3% Ps 345,00 

PNPs-20.0 20,0µ/20ml/3% Ps 365,00 

PNPs-40.0 40,0µ/20ml/3% Ps 385,00 

PNPs-50.0 50,0µ/20ml/3% Ps 385,00 



PNPs-75.0 75,0µ/20ml/3% Ps 395,00 

Top of Page 



Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 





Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 







Some polystyrene particles can be offered with special coatings, please ask for 

quotation. 


PPs-0.05 0,05µ/ 15ml / 2,5% plain 60,80 

PPs-0.1 0,1µ/ 15ml / 2,5% plain 50,10 

PPs-0.2 0,2µ/ 15ml / 2,5% plain 50,10 

PPs-0.4 0,4µ/ 15ml / 2,5% plain 50,10 

PPs-0.6 0,6µ/ 15ml / 2,5% plain 50,10 

PPs-0.8 0,8µ/ 15ml / 2,5% plain 55,75 

PPs-1.0 1,0µ/ 15ml / 2,5% plain 60,80 

PPs-2.0 2,0µ/ 10ml / 2,5% plain 79,80 

PPs-3.0 3,0µ/ 10ml / 2,5% plain 95,80 

PPs-4.0 4,0µ/ 5ml / 2,5% plain 76,20 

PPs-6.0 6,0µ/ 5ml / 2,5% plain 76,20 

PPs-8.0 8,0µ/ 5ml / 2,5% plain 76,20 

PPs-10.0 10,0µ/ 5ml / 2,5% plain 95,80 

PPs-12.0 12,0µ/ 5ml / 2,5% plain 95,80 

PPs-15.0 15,0µ/ 5ml 2,5% plain 95,80 

PPs-30.0 30,0µ/ 25ml / 5,0% plain 230,00 

PPs-65.0 65,0µ/ 25ml / 5,0% plain 230,00 


file:///F|/Kisker/Kisker/deutsch/micro_polyst.htm (1 von 13) [08.12.2005 22:31:48] 



& DNA 

Measurement 




Magnetic Particles


Monodisperse polystyrene microparticles, which contain carboxyl groups at the surface. 

They are used for passive adsorption or covalent binding of proteins. 


















PPs-0.2NH2 0,2µ/ 10ml / 2,5% NH2 129,00 

PPs-0.5NH2 0,5µ/ 10ml / 5,0% NH2 129,00 

PPs-0.8NH2 0,8µ/ 10ml / 5,0% NH2 129,00 

PPs-1.0NH2 1,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.0NH2 2,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.5NH2 2,5µ/ 10ml / 5,0% NH2 145,00 

PPs-3.0NH2 3,0µ/ 10ml / 5,0% NH2 149,00 

PPs-3.5NH2 3,5µ/ 10ml / 5,0% NH2 149,00 

PPs-7.0NH2 6,0-7,9µ/ 10ml / 5,0% NH2 195,00 


file:///F|/Kisker/Kisker/deutsch/micro_polyst.htm (2 von 13) [08.12.2005 22:31:48]


These particles have CV under 5% and can be used to check ot calibrate particel-sizesystems. 


PPs-6.0P 6,0µ/ 1000mg plain 269,00 

PPs-8.0P 8,0µ/ 1000mg plain 269,00 

PPs-12.0P 12,0µ/ 1000mg plain 269,00 

PPs-20.0P 20,0µ/ 1000mg plain 269,00 
















IgG coated polystyrene particles are prepared by using passive adsorption, the coated particles are stable for several 








PC-Fc-0.8 Goat Anti-mouse IgG polystyrene,affin.pur., Fc specific 0,7-0,9/20ml 0,25 229,00 

PC-HL-0.8 Goat Anti-mouse IgG polystyrene,affin.pur., H & L 0,7-0,9/20ml 0,25 229,00 

PC-CAHL-0.8 

PC-CAR-0.8 


absorbed,H&L 


absorbed,H&L 

0,7-0,9/20ml 0,25 249,00 

0,7-0,9/20ml 0,25 249,00 









































































The Fluorescent Particles are prepared by either staining the Polystyrene with the fluorophore or by polymerizing the fluorophore 

in styrene in the presence of polystyrene particles. A wide varity of fluorescent particles can be prepared ranging in size, type of 

fluorophore, fluorecent intensity and surface functional groups. Most of the used fluorophores are waterinsoluble and therefore 

very stable. These fluorophores incorporated into the particles do not leach and their color and fluorescence remains stable for a 

long time under proper storage conditions. 




Ex/Em max 

(nm) 



470/480 Yellow 470 – 490 520 FITC 










The FITC labeled polystyrene particles can be used as calibration particles for flow cytometry. They can also be used to cross 



bottle. 


PFITC-0.8 FITC 0,7 –0,9 0,1 2ml 175,00 

PFITC-2.0 FITC 2,0 - 2,9 0,1 2ml 175,00 

PFITC-3.0 FITC 3,0 – 3,9 0,1 2ml 187,00 

PFITC-5.0 FITC 5,0 – 5,9 0,1 2ml 198,00 

PFITC-7.0 FITC 7,0 – 7,9 0,1 2ml 214,00 

PFITC-8.0 FITC 8,0 – 8,9 0,1 2ml 214,00 





Rainbow Calibration Particles are a mixture of fluorophores that allows exitation at any wavelength from 365 to 650nm. It 

enables calibration of all channels of the flow cytometer with same set of particles in similiar size, but with different intensities. 

Rainbow Fluorescent Particles are similiar to the above described, exept these represent single peak, uniform size particles. 

The Rainbow fluorescent Particles are usually the brightest peak of the corresponding Calibration Particles with the exeption of P- 

RFPM-3.0, which has fluorescent intensity of the stained cells. Since these particles contain single peak with very small 

flluorescence and size CV, they are very useful in the alignment of the optical system of the flow cytometer. 

Yellow Calibration Particles are designed for routine calibration of the fluorescin channel. They contain a set of similiar size 

Yellow Particles with different fluorescence intensities. 




Allophycocyanin Calibration Particles contain a mixture of 3.0µ fluorescent particles with different intensity in Allophycocyanin 

channel and can be exited with either a He-Ne laser at 632 nm or a diode laser at 635nm. 

Blank Calibration Particles are the blank peak of the corresponding Rainbow Calibration Particles. These particles can be 

used to set the threshold of the instrument in each channel. 


P-RCP-2.0 4 peaks 1,8-2,2/ 5ml 285,85 

P-RCP-3.0 6 peaks 3,0-3,4/ 5ml 299,85 

P-RCP8-3.0 8 peaks 3,0-3,4/ 5ml 299,85 

P-RCP-3.5 4 peaks 3,5-4,0/ 5ml 299,85 

P-RCP-6.0 6 peaks 6,0-6,5/ 5ml 315,60 

P-RCP-7.0 5 peaks 6,5-8,0/ 5ml 315,60 









P-RLCP-3.0 Rainbow Linear Calibration particles, 5 peaks 3,0-3,4/ 5ml 299,20 













Particles. 






The Yellow Fluorescent Particle Kits consist of 2,8µ and 3,6µ Yellow Fluorescent Particles in multiple fluorescence intensities in 

FITC channels. These two kits can be used to develop multiplex assays using either PE or PE-Cy5 tracers for detection. 

Cat. # Description % w/v / pack size Euro 



P-GAMPO3.6Kit Goat-anti-Mouse Pink-odd 6 peaks, 3,6µ 0,1% / 6 x 1ml 572,60 

P-GAMPE3.6Kit Goat-anti-Mouse Pink-even 6 peaks, 3,6µ 0,1% / 6 x 1ml 572,60 

P-CPO2.8Kit Carboxyl Pink-odd 6 peaks, 2,8µ 0,25% / 6 x 1ml 572,60 

P-CPE2.8Kit Carboxyl Pink-even 6 peaks, 2,8µ 0,25% / 6 x 1ml 572,60 

P-S-AO2.8Kit S-Avidin Pink-odd 6 peaks, 2,8µ 0,1% / 6 x 1ml 572,60 

P-S-AE2.8Kit S-Avidin Pink-odd 6 peaks, 2,8µ 0,1% / 6 x 1 ml 572,60 






PFP-00552 Yellow 0,04 –0,06 1 2ml 139,00 

PFP-0252 Yellow 0,1 – 0,3 1 2ml 139,00 


PFP-0552 Yellow 0,4 – 0,6 1 2ml 139,00 


PFP-0852 Yellow 0,7 – 0,9 1 2ml 139,00 









PFP-3052 Yellow 2,5 – 3,4 1 2ml 179,00 

PFP-4052 Yellow 3,5 – 4,5 1 2ml 179,00 

PFP-6052 Yellow 6,0 – 7,9 1 2ml 192,00 

PFP-10052 Yellow 10,0 – 14,0 1 2ml 235,00 

PFP-15052 Yellow 15,0 – 19,0 1 2ml 259,00 















PFP-00556 Nile red 0,04 –0,06 1 2ml 139,00 

PFP-0256 Nile red 0,1 – 0,3 1 2ml 139,00 

PFP-0856 Nile red 0,7 – 0,9 1 2ml 139,00 



PFP-2056 Nile red 1,7 – 2,2 1 2ml 159,00 

PFP-3056 Nile red 2,5 – 3,4 1 2ml 179,00 

PFP-4056 Nile red 3,5 – 4,5 1 2ml 179,00 

PFP-6056 Nile red 6,0 – 7,9 1 2ml 192,00 


PFP-9056 Nile red 8,0 - 9,9 1 2ml 259,00 


PFP-10056 Nile red 10,0 – 14,0 1 2ml 235,00 

PFP-15056 Nile red 15,0 – 19,0 1 2ml 259,00 










PFP-00558 Pink 0,04 –0,06 1 2ml 139,00 

PFP-0558 Pink 0,4 – 0,6 1 2ml 139,00 

PFP-0858 Pink 0,7 – 0,9 1 2ml 139,00 

PFP-2058 Pink 1,7 – 2,2 1 2ml 159,00 

PFP-4058 Pink 2,5 – 4,5 1 2ml 179,00 

PFP-6058 Pink 6,0 – 7,9 1 2ml 192,00 










PFP-00562 Purple 0,04 –0,06 1 2ml 139,00 

PFP-0262 Purple 0,1-0,3 1 2ml 139,00 

PFP-0562 Purple 0,4 – 0,6 1 2ml 139,00 

PFP-0862 Purple 0,7 – 0,9 1 2ml 139,00 




PFP-4062 Purple 2,5 – 4,5 1 2ml 179,00 





PFP-00570 Sky blue 0,04 –0,06 0,25 2ml 139,00 

PFP-0270 Sky blue 0,1-0,3 0,25 2ml 139,00 

PFP-0570 Sky blue 0,4 – 0,6 1,0 2ml 139,00 

PFP-0870 Sky blue 0,7 – 0,9 1 2ml 139,00 

PFP-2070 Sky blue 1,7 – 2,2 1 2ml 159,00 


PFP-3070 Sky blue 2,5 – 3,4 0,2 2ml 179,00 

PFP-4070 Sky blue 3,5 – 4,5 0,2 2ml 179,00 


PFP-15070 Sky blue 15,0-19,0 0,2 2ml 259,00 





These particles can also be offered as 10% suspension, when higher concentrations for production are necessarry. 









In the following chapter we offer some beads of larger sizes but with relative narrow size distribution. The offered quantities are 

laboratory quantities and all beads can be offered as bulk quantities also. The beads are used for different applications, e. g. 

manufacturing of implatates( pmma-beads and pharmaceutical synthetic research (polystyrene beads). 








PLPM-100 50 -100µ PMMA 10g 29,00 

PLPM-125 125 - 250µ PMMA p.o.r. 

PLPM-300 200 - 400µ PMMA 10g 29,00 

PLPM-400 400 - 500µ PMMA 10g 29,00 

PLPM-600 500 - 600 µ PMMA 10g 29,00 

PLPM-800 700 - 1000µ PMMA 10g 29,00 



advantages depending on the application compared to polystyrene particles. They have a higher density ( 1,51g/cm3), are very 

stable, can be stored unlimited, can be resuspended in water, they do not quench in most organic solvents and are heat 

resistant up to 200°C. The melamine microparticles are hydrophilic and monodisperse in water (CV 1-2%). The refractive index 

is 1,68. 


PMa-1.0 1,0µ/ 750mg 210,00 

1,0µ/ 1,5g 395,00 

PMa-2.0 2,0µ/ 750mg 210,00 

2,0µ/ 1,5g 395,00 

PMa-3.0 3,0µ/ 750mg 210,00 

3,0µ/ 1,5g 395,00 

PMa-4.0 4,0µ/ 750mg 210,00 



4,0µ/ 1,5g 395,00 

PMa-5.0 5,0µ/ 750mg 249,00 

5,0µ/1,5g 473,00 

PMa-6.0 6,0µ/ 750mg 249,00 

6,0µ/ 1,5g 473,00 

PMa-7.0 7,0µ/ 750mg 249,00 

7,0µ/ 1,5g 473,00 

PMa-8.0 8,0µ/ 750mg 249,00 

8,0µ/ 1,5g 473,00 

PMa-9.0 9,0µ/ 750mg 249,00 

9,0µ/ 1,5g 473,00 

PMa-10.0 10,0µ/ 750mg 270,00 


10,0µ/ 1,5g 515,00 













































The particle size standards are supplied as 2% or 3% suspension in deionized water. The CV is depending on each size 

at 1 - 3,5% 



PNPs-0.1 0,1µ/10ml/2% Ps 210,00 

PNPs-0.5 0,5µ/10ml/2% Ps 210,00 

PNPs-1.0 1,0µ/10ml/2% Ps 210,00 

PNPs-1.5 1,5µ/10ml/2% Ps 259,00 

PNMf-2.0 2,0µ/10ml/2% Mf 259,00 

PNMf-2.5 2,5µ/10ml/2% Mf 259,00 

PNMf-3.0 3,0µ/10ml/2% Mf 259,00 

PNMf-3.5 3,5µ/10ml/2% Mf 259,00 

PNMf-4.0 4,0µ/10ml/2% Mf 259,00 

PNPs-4.0 4,0µ/10ml/2% Ps 259,00 

PNMf-4.5 4,5µ/10ml/2% Mf 259,00 

PNMf-5.0 5,0µ/10ml/2% Mf 259,00 

PNMf-5.5 5,5µ/10ml/2% Mf 259,00 

PNMf-6.0 6,0µ/10ml/2% Mf 259,00 

PNMf-7.0 7,0µ/10ml/2% Mf 259,00 

PNMf-8.0 8,0µ/10ml/2% Mf 259,00 

PNMf-9.0 9,0µ/10ml/2% Mf 259,00 

PNMf-10.0 10,0µ/10ml/2% Mf 295,00 

PNPs-15.0 15,0µ/20ml/3% Ps 345,00 

PNPs-20.0 20,0µ/20ml/3% Ps 365,00 

PNPs-40.0 40,0µ/20ml/3% Ps 385,00 

PNPs-50.0 50,0µ/20ml/3% Ps 385,00 



PNPs-75.0 75,0µ/20ml/3% Ps 395,00 

Top of Page 




P.O. Box 1329 


Germany 


Micoparticles 


These monodisperse polystyrene microparticles, also 

called Latex-microspheres, are used in a wide range of 

immunodiagnostic assays, as size-standards for 

calibration of equipment, in cellbiology applications etc. 

The physical adsorption of the polystyrene particles is 

used to bind ligands to the surface of the particles. 

Some polystyrene particles can be offered with special 

coatings, please ask for quotation. 


PPs-0.05 0,05µ/ 15ml / 2,5% plain 60,80 

PPs-0.1 0,1µ/ 15ml / 2,5% plain 50,10 

PPs-0.2 0,2µ/ 15ml / 2,5% plain 50,10 

PPs-0.4 0,4µ/ 15ml / 2,5% plain 50,10 

PPs-0.6 0,6µ/ 15ml / 2,5% plain 50,10 

PPs-0.8 0,8µ/ 15ml / 2,5% plain 55,75 

PPs-1.0 1,0µ/ 15ml / 2,5% plain 60,80 

PPs-2.0 2,0µ/ 10ml / 2,5% plain 79,80 

PPs-3.0 3,0µ/ 10ml / 2,5% plain 95,80 

PPs-4.0 4,0µ/ 5ml / 2,5% plain 76,20 

PPs-6.0 6,0µ/ 5ml / 2,5% plain 76,20 

PPs-8.0 8,0µ/ 5ml / 2,5% plain 76,20 

PPs-10.0 10,0µ/ 5ml / 2,5% plain 95,80 

file:///F|/Kisker/Kisker/deutsch/micro_polyst_d.htm (1 von 18) [08.12.2005 22:31:52] 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 

e-mail contact@kisker-biotech.com


PPs-12.0 12,0µ/ 5ml / 2,5% plain 95,80 

PPs-15.0 15,0µ/ 5ml 2,5% plain 95,80 

PPs-30.0 30,0µ/ 25ml / 5,0% plain 230,00 

PPs-65.0 65,0µ/ 25ml / 5,0% plain 230,00 


Monodisperse polystyrene microparticles, which contain 

carboxyl groups at the surface. They are used for 

passive adsorption or covalent binding of proteins. 


PPs- 

0.05COOH 

PPs- 

0.1COOH 

PPs- 

0.2COOH 

PPs- 

0.4COOH 

PPs- 

0.6COOH 

PPs- 

0.8COOH 

PPs- 

1.0COOH 

PPs- 

2.0COOH 

PPs- 

3.0COOH 

PPs- 

4.0COOH 

0,05µ/ 15ml / 5,0% COOH 135,00 

0,1µ/ 15ml / 5,0% COOH 135,00 

0,2µ/ 15ml / 5,0% COOH 135,00 

0,4µ/ 15ml / 5,0% COOH 135,00 

0,6µ/ 15ml / 5,0% COOH 135,00 

0,8µ/ 15ml / 5,0% COOH 135,00 

1,0µ/ 10ml / 5,0% COOH 143,00 

2,0µ/ 10ml / 5,0% COOH 150,00 

3,0µ/ 10ml / 5,0% COOH 155,00 

4,0µ/ 10ml / 5,0% COOH 155,00 

file:///F|/Kisker/Kisker/deutsch/micro_polyst_d.htm (2 von 18) [08.12.2005 22:31:52]


PPs- 

6.0COOH 

PPs- 

8.0COOH 

6,0µ/ 10ml / 5,0% COOH 170,00 

8,0µ/ 10ml / 5,0% COOH 170,00 



amino groups at the surface. They are used for covalent 

binding of proteins with the glutaraldehyde methode. 


PPs-0.2NH2 0,2µ/ 10ml / 2,5% NH2 129,00 

PPs-0.5NH2 0,5µ/ 10ml / 5,0% NH2 129,00 

PPs-0.8NH2 0,8µ/ 10ml / 5,0% NH2 129,00 

PPs-1.0NH2 1,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.0NH2 2,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.5NH2 2,5µ/ 10ml / 5,0% NH2 145,00 

PPs-3.0NH2 3,0µ/ 10ml / 5,0% NH2 149,00 

PPs-3.5NH2 3,5µ/ 10ml / 5,0% NH2 149,00 

PPs-7.0NH2 6,0-7,9µ/ 10ml / 5,0% NH2 195,00 


These particles have CV under 5% and can be used to 

check ot calibrate particel-size-systems. 




PPs-6.0P 6,0µ/ 1000mg plain 269,00 

PPs-8.0P 8,0µ/ 1000mg plain 269,00 

PPs-12.0P 12,0µ/ 1000mg plain 269,00 

PPs-20.0P 20,0µ/ 1000mg plain 269,00 


These polystyrene microparticles are prepared by polymerizing non-fluorescent dye in the 

styrene. The particles are free of solvent commonly found when particles are prepared by 

staining with a solution of dye in inorganic solvent. The intensely colored particles enhance the 

visual detection in assays such as latex agglutination, dipstick and membrane based assays. 










The coated microparticles are prepared either by passive adsorption or covalent coupling 

depending upon the intended applications. The avidin and biotin coated particles are prepared by 

covalent coupling. Even through the 0,7 - 0,9µ Goat anti-mouse IgG coated polystyrene particles 

are prepared by using passive adsorption, the coated particles are stable for several years under 

proper storage conditions. 





Antibody contents 14µg/mg solid, 0,2µg/cm2, 1,5 x 10E4 IgG/particle, binding capacity to IgG- 

FITC 4µg/mg 


PC-Fc-0.8 

Goat Anti-mouse IgG 

polystyrene,affin.pur., Fc specific 

file:///F|/Kisker/Kisker/deutsch/micro_polyst_d.htm (4 von 18) [08.12.2005 22:31:52] 

0,7-0,9/20ml 0,25 229,00


PC-HL-0.8 

PC-CAHL-0.8 

PC-CAR-0.8 


polystyrene,affin.pur., H & L 


poly.,affin.pur./cross absorbed,H&L 



0,7-0,9/20ml 0,25 229,00 

0,7-0,9/20ml 0,25 249,00 

0,7-0,9/20ml 0,25 249,00 









































































The Fluorescent Particles are prepared by either staining the Polystyrene with the fluorophore or 

by polymerizing the fluorophore in styrene in the presence of polystyrene particles. A wide varity 

of fluorescent particles can be prepared ranging in size, type of fluorophore, fluorecent intensity 

and surface functional groups. Most of the used fluorophores are waterinsoluble and therefore 

very stable. These fluorophores incorporated into the particles do not leach and their color and 


The exicitation and emmission data of the fluorecent particles in aqueous solution are shown in 

the figure. The particles are monodisperse, the stated diameters are nominal, the actual diameter 

is stated on each bottle. 


Ex/Em max 

(nm) 



470/480 Yellow 470 – 490 520 FITC 

525/560 Nile red 488 – 540 560 

R-phycoerythrin, Propidium 

Iodide 







Multi-Fluo 360 – 635 400 – 680 


Contains multiple 

fluorophores 

The FITC labeled polystyrene particles can be used as calibration particles for flow cytometry. 

They can also be used to cross calibrate different flow cytometers so that data can be 

normalized. 

Please note, that the size ranges stated below are nominal, the actual size of these 

monodisperse particles is stated on each bottle. 


PFITC-0.8 FITC 0,7 –0,9 0,1 2ml 175,00 

PFITC-2.0 FITC 2,0 - 2,9 0,1 2ml 175,00 

PFITC-3.0 FITC 3,0 – 3,9 0,1 2ml 187,00 

PFITC-5.0 FITC 5,0 – 5,9 0,1 2ml 198,00 

PFITC-7.0 FITC 7,0 – 7,9 0,1 2ml 214,00 

PFITC-8.0 FITC 8,0 – 8,9 0,1 2ml 214,00 


Our calibration particles are designed for routine calibration of flow cytometers and are used 

extensivly for QC and long term performance tracking of flow cytometers. They can also be used 

for routine alignment and calibration in fluorescence and confocal fluorescence microscopy. All 

calibration particles are supplied in dropper bottles containing 5 x10 6 particles. 

Rainbow Calibration Particles are a mixture of fluorophores that allows exitation at any 

wavelength from 365 to 650nm. It enables calibration of all channels of the flow cytometer with 

same set of particles in similiar size, but with different intensities. 

Rainbow Fluorescent Particles are similiar to the above described, exept these represent 

single peak, uniform size particles. The Rainbow fluorescent Particles are usually the brightest 

peak of the corresponding Calibration Particles with the exeption of P-RFPM-3.0, which has 

fluorescent intensity of the stained cells. Since these particles contain single peak with very small 

flluorescence and size CV, they are very useful in the alignment of the optical system of the flow 

cytometer. 



Yellow Calibration Particles are designed for routine calibration of the fluorescin channel. They 

contain a set of similiar size Yellow Particles with different fluorescence intensities. 

Rainbow Linear Calibration Particles are designed to check the linearity of the PMT in the 

linear scale of all available channels.They are also useful for quantifying the DNA content of cells 

stained with Hoechst dye, DAPI, Ethidium bromide, Propidium bromide, YOYO or TOTO. 

Allophycocyanin Calibration Particles contain a mixture of 3.0µ fluorescent particles with 

different intensity in Allophycocyanin channel and can be exited with either a He-Ne laser at 632 

nm or a diode laser at 635nm. 

Blank Calibration Particles are the blank peak of the corresponding Rainbow Calibration 

Particles. These particles can be used to set the threshold of the instrument in each channel. 


P-RCP-2.0 4 peaks 1,8-2,2/ 5ml 285,85 

P-RCP-3.0 6 peaks 3,0-3,4/ 5ml 299,85 

P-RCP8-3.0 8 peaks 3,0-3,4/ 5ml 299,85 

P-RCP-3.5 4 peaks 3,5-4,0/ 5ml 299,85 

P-RCP-6.0 6 peaks 6,0-6,5/ 5ml 315,60 

P-RCP-7.0 5 peaks 6,5-8,0/ 5ml 315,60 









P-RLCP-3.0 

Rainbow Linear Calibration particles, 5 

peaks 

3,0-3,4/ 5ml 299,20 












2. Measuring Molecules of Equivalent Fluorescin ( MEFL ), PE ( MEPE ) and RPE-CY5 (MEPCY 

) using Rainbow Calibration Particles. 


The Pink Fluorescent Particle Kits consist of either 3.6µ or 2,8µ Fluorescent Particles with twelve 

different fluorescence intensities in PE channel. They are designed to simplify the multiplex assay 

development using any flow cytometer. Low cost FITC conjugates can be used for detection. 

They are supplied as kits of either six odd numbered peaks or six even numbered peaks. Four 

different Pink Fluorescent Particle Kits are available for different applications. 

The Yellow Fluorescent Particle Kits consist of 2,8µ and 3,6µ Yellow Fluorescent Particles in 

multiple fluorescence intensities in FITC channels. These two kits can be used to develop 

multiplex assays using either PE or PE-Cy5 tracers for detection. 


% w/v / pack 

size 

Euro 



P-GAMPO3.6Kit 

P-GAMPE3.6Kit 

P-CPO2.8Kit 

P-CPE2.8Kit 

P-S-AO2.8Kit 

P-S-AE2.8Kit 

Goat-anti-Mouse Pink-odd 6 

peaks, 3,6µ 

Goat-anti-Mouse Pink-even 6 

peaks, 3,6µ 

Carboxyl Pink-odd 6 peaks, 

2,8µ 

Carboxyl Pink-even 6 peaks, 

2,8µ 

S-Avidin Pink-odd 6 peaks, 

2,8µ 


2,8µ 

0,1% / 6 x 1ml 572,60 

0,1% / 6 x 1ml 572,60 

0,25% / 6 x 1ml 572,60 

0,25% / 6 x 1ml 572,60 

0,1% / 6 x 1ml 572,60 

0,1% / 6 x 1 ml 572,60 








PFP-00552 Yellow 0,04 –0,06 1 2ml 139,00 

PFP-0252 Yellow 0,1 – 0,3 1 2ml 139,00 


PFP-0552 Yellow 0,4 – 0,6 1 2ml 139,00 


PFP-0852 Yellow 0,7 – 0,9 1 2ml 139,00 







PFP-3052 Yellow 2,5 – 3,4 1 2ml 179,00 

PFP-4052 Yellow 3,5 – 4,5 1 2ml 179,00 

PFP-6052 Yellow 6,0 – 7,9 1 2ml 192,00 

PFP-10052 Yellow 10,0 – 14,0 1 2ml 235,00 

PFP-15052 Yellow 15,0 – 19,0 1 2ml 259,00 

















PFP-00556 Nile red 0,04 –0,06 1 2ml 139,00 

PFP-0256 Nile red 0,1 – 0,3 1 2ml 139,00 

PFP-0856 Nile red 0,7 – 0,9 1 2ml 139,00 



PFP-2056 Nile red 1,7 – 2,2 1 2ml 159,00 

PFP-3056 Nile red 2,5 – 3,4 1 2ml 179,00 

PFP-4056 Nile red 3,5 – 4,5 1 2ml 179,00 

PFP-6056 Nile red 6,0 – 7,9 1 2ml 192,00 


PFP-9056 Nile red 8,0 - 9,9 1 2ml 259,00 


PFP-10056 Nile red 10,0 – 14,0 1 2ml 235,00 

PFP-15056 Nile red 15,0 – 19,0 1 2ml 259,00 








PFP-00558 Pink 0,04 –0,06 1 2ml 139,00 

PFP-0558 Pink 0,4 – 0,6 1 2ml 139,00 



PFP-0858 Pink 0,7 – 0,9 1 2ml 139,00 

PFP-2058 Pink 1,7 – 2,2 1 2ml 159,00 

PFP-4058 Pink 2,5 – 4,5 1 2ml 179,00 

PFP-6058 Pink 6,0 – 7,9 1 2ml 192,00 










PFP-00562 Purple 0,04 –0,06 1 2ml 139,00 

PFP-0262 Purple 0,1-0,3 1 2ml 139,00 

PFP-0562 Purple 0,4 – 0,6 1 2ml 139,00 

PFP-0862 Purple 0,7 – 0,9 1 2ml 139,00 




PFP-4062 Purple 2,5 – 4,5 1 2ml 179,00 







PFP-00570 Sky blue 0,04 –0,06 0,25 2ml 139,00 

PFP-0270 Sky blue 0,1-0,3 0,25 2ml 139,00 

PFP-0570 Sky blue 0,4 – 0,6 1,0 2ml 139,00 

PFP-0870 Sky blue 0,7 – 0,9 1 2ml 139,00 

PFP-2070 Sky blue 1,7 – 2,2 1 2ml 159,00 


PFP-3070 Sky blue 2,5 – 3,4 0,2 2ml 179,00 

PFP-4070 Sky blue 3,5 – 4,5 0,2 2ml 179,00 


PFP-15070 Sky blue 15,0-19,0 0,2 2ml 259,00 



These particles can also be offered as 10% suspension, when higher concentrations for 

production are necessarry. 









In the following chapter we offer some beads of larger sizes but with relative narrow size 

distribution. The offered quantities are laboratory quantities and all beads can be offered as bulk 

quantities also. The beads are used for different applications, e. g. manufacturing of implatates( 

pmma-beads and pharmaceutical synthetic research (polystyrene beads). 










PLPM-100 50 -100µ PMMA 10g 29,00 

PLPM-125 125 - 250µ PMMA p.o.r. 

PLPM-300 200 - 400µ PMMA 10g 29,00 

PLPM-400 400 - 500µ PMMA 10g 29,00 

PLPM-600 500 - 600 µ PMMA 10g 29,00 

PLPM-800 700 - 1000µ PMMA 10g 29,00 


The melamine microparticles ( polymethylenemelamine particles) are made from crosslinked 

melamine and have some advantages depending on the application compared to polystyrene 

particles. They have a higher density ( 1,51g/cm3), are very stable, can be stored unlimited, can 

be resuspended in water, they do not quench in most organic solvents and are heat resistant up 

to 200°C. The melamine microparticles are hydrophilic and monodisperse in water (CV 1-2%). 

The refractive index is 1,68. 


PMa-1.0 1,0µ/ 750mg 210,00 

1,0µ/ 1,5g 395,00 

PMa-2.0 2,0µ/ 750mg 210,00 

2,0µ/ 1,5g 395,00 

PMa-3.0 3,0µ/ 750mg 210,00 

3,0µ/ 1,5g 395,00 

PMa-4.0 4,0µ/ 750mg 210,00 

4,0µ/ 1,5g 395,00 

PMa-5.0 5,0µ/ 750mg 249,00 

5,0µ/1,5g 473,00 

PMa-6.0 6,0µ/ 750mg 249,00 

6,0µ/ 1,5g 473,00 



PMa-7.0 7,0µ/ 750mg 249,00 

7,0µ/ 1,5g 473,00 

PMa-8.0 8,0µ/ 750mg 249,00 

8,0µ/ 1,5g 473,00 

PMa-9.0 9,0µ/ 750mg 249,00 

9,0µ/ 1,5g 473,00 

PMa-10.0 10,0µ/ 750mg 270,00 

10,0µ/ 1,5g 515,00 


These fluorescent microparticles have same basic characteristics as the powdered melamine 

microparticles. They are useful e.g. in diagnostic assays, protein binding procedures, size 

standards in microscopy applications as tracers and indicators, wherever a single particel must 

be identified in mixt medium. All fluorescent microparticles are supplied as 2,5% aqueous 





Additional available microspheres are: Acridine orange and Ethidium bromide marked 

microspheres, please ask for available size and price. 





























Our Particle size standards are made from Polystyrene (Ps) or crosslinked Melamin (Mf) . We 

offer this superior grade of particles in the widest range from 0,1µ to 15µ of certified particles 

available today. Each lot of the NIST Certified Particles is characterized by documented methods, 

based on the NIST (National Institute of Standards and Technology) and. CRB ( Community 

Bureau of Reference ) as TEM, REM and Coulter Counter. 

For each particle size standard we supply a certificate of analysis, which documents the most 

important characteristics and physical data like number of particles, particle size, standard 

deviation ( SD ), Coefficient of Variance ( CV ), specific weight, refractive index, bead density and 

more. 

The particle size standards are supplied as 2% or 3% suspension in deionized water. The 

CV is depending on each size at 1 - 3,5% 





PNPs-0.1 0,1µ/10ml/2% Ps 210,00 

PNPs-0.5 0,5µ/10ml/2% Ps 210,00 

PNPs-1.0 1,0µ/10ml/2% Ps 210,00 

PNPs-1.5 1,5µ/10ml/2% Ps 259,00 

PNMf-2.0 2,0µ/10ml/2% Mf 259,00 

PNMf-2.5 2,5µ/10ml/2% Mf 259,00 

PNMf-3.0 3,0µ/10ml/2% Mf 259,00 

PNMf-3.5 3,5µ/10ml/2% Mf 259,00 

PNMf-4.0 4,0µ/10ml/2% Mf 259,00 

PNPs-4.0 4,0µ/10ml/2% Ps 259,00 

PNMf-4.5 4,5µ/10ml/2% Mf 259,00 

PNMf-5.0 5,0µ/10ml/2% Mf 259,00 

PNMf-5.5 5,5µ/10ml/2% Mf 259,00 

PNMf-6.0 6,0µ/10ml/2% Mf 259,00 

PNMf-7.0 7,0µ/10ml/2% Mf 259,00 

PNMf-8.0 8,0µ/10ml/2% Mf 259,00 

PNMf-9.0 9,0µ/10ml/2% Mf 259,00 

PNMf-10.0 10,0µ/10ml/2% Mf 295,00 

PNPs-15.0 15,0µ/20ml/3% Ps 345,00 

PNPs-20.0 20,0µ/20ml/3% Ps 365,00 

PNPs-40.0 40,0µ/20ml/3% Ps 385,00 

PNPs-50.0 50,0µ/20ml/3% Ps 385,00 

PNPs-75.0 75,0µ/20ml/3% Ps 395,00 




Kisker-Biotech Microparticles - Magnetic Particles 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 





Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 





& DNA 

Measurement 






relativly uniform in size, spherical in shape and paramagnetic in nature. The paramagnetic nature of the particles allows them to 

be separated by using a magnet but the particles will resuspend easily when removed from the magnet. They will not retain any 

significant magnetism even after repeat exposure to strong magnetic field. 

These magnetic particles can be used for cell separation, affinity purification, DNA probe assays, magnetic particle EIA etc. The 

coated magnetic particles are prepared by covalent coupling, concentration is around 2 x 10 8 particles/ml, 0,02% sodium azide 

added.. 


Cat. # Description Size µ / unit % w/v Euro 

PMAv-1 Magnet Particles Avidin coated 1,0-1,9µ/ 10ml 0,5% 260,00 




PMSt-0.7 Magnet Particles Streptavidin coated 0,7-0,9µ/ 10ml 0,5% 260,00 




PMSt-3 Magnet Particles Streptavidin coated 3,0-3,9µ/ 10ml 0,5% 278,00 





PMGAM-4 

PMAMC-4 

PMGAR-4 

PMGAH-4 

Mag. Part. Goat anti-mouse IgG (Affinity 

purified, H & L) 

Mag Part. Goat anti-mouse IgG (Aff. purif. 

& cross ads.H&L) 

Magnet Part. Goat ant-rabbit IgG (Affinity 

purified H & L ) 

Mag. Part. Goat anti Human IgG ( Affinity 


file:///F|/Kisker/Kisker/deutsch/micro_magnetic_particles.htm (1 von 5) [08.12.2005 22:31:55] 

4,0-4,5µ/ 10ml 1,0% 334,90 

4,0-4,5µ/ 10ml 1,0% 363,00 

4,0-4-5µ/ 10ml 1,0% 334,90 

4,0-4,5µ/ 10ml 1,0% 334,90


PMB-1 

PMB-4 

Magnet Part. Biotin covalently coupled to 

BSA coated Mag.Part. 

Mag. Part. Biotin coval. coupled to BSA 

coated Mag.Part. 

1,0-1,9µ/ 10ml 0,5% 194,30 

4,0-4,5µ/ 10ml 1,0% 194,30 

PMPa-4 Magnet Particles Papain coated 4,0-4,5µ/ 2ml 1,0% 204,00 

PMPe-4 Magnet Particles Pepsin coated 4,0-4,5µ/ 2ml 1,0% 204,00 

PMPrA-4 Magnet Particles Protein A coated 4,0-4,5µ/ 5ml 1,0% 255,10 

PMPrG-4 Magnet Particles Protein G coated 4,0-4,5µ/ 5ml 1,0% 306,25 

Available Data sheets: Binding capacity of 1. Avidin Mag.Part/ 2.GaM Mag.Part./ 3.Streptavidin Mag.Part./ 4.Biotin Mag.Part. 






magnet, 50nm and 100nm particles can due to their small size only be seoarated by a "High Gradient 

magnetic Field" device ( HGMF ). They are supplied as aqueous solution in a concentration of 

25mg/ml as plain and 10m 

Cat. # Size/quantity chemistry/concentr. Euro 

PMP-50 0,05µ/ 5ml plain/ 10mg/ml 138,50 




PMN-50 0,05µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-100 0,10µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-130 0,13µ/ 5ml -NH2- / 10mg/ml 145,00 

PMN-250 0,25µ/ 5ml -NH2- / 10mg/ml 136,00 

PMC-50 0,05µ/ 5ml -COOH- / 5mg/ml 169,50 




PMAV-50 0,13µ/ 5ml Avidin / 2,5mg/ml 339,50 

PMAV-130 0,13µ/ 5ml Avidin / 10mg/ml 239,50 


PMSA-50 0,13µ/ 1ml Streptavidin / 2,5mg/ml 239,00 

PMSA-130 0,13µ/ 1ml Streptavidin / 10mg/ml 209,00 


PMPA-130 0,13µ/ 1ml Protein A / 10mg/ml 158,00 



file:///F|/Kisker/Kisker/deutsch/micro_magnetic_particles.htm (2 von 5) [08.12.2005 22:31:55]



particles have the characteristic, to be magnetizated within a magnetic field. So they can be separeted easy within a 

solution. Outside of the magnet field the particles are not magnetic. These particles are made by coating a layer of iron 

oxide and polystyrene onto polystyrene core particles. The particles are useful for cellseparation, coupling of proteines, 

antibodies and DNA, affinity purification and DNA probe assays. The particles are monodisperse with low SD and a CV 

of less than 5%. They are supplied as aqueous solution. 

Cat. # size/quantity Concentration chemistry Euro 

PM-2.5 2,0-2,9µ/ 10ml 25 mg/ml plain 159,00 

PM-3.5 3,0-3-9µ/ 10ml 25 mg/ml plain 159,00 


PMC-0.1 0.1-0.4µ/ 10ml 25 mg/ml COOH funct. 165,00 



PMC-1.0 1,0-1,4µ/ 10ml 25 mg/ml COOH funct. 175,00 

PMC-1.5 1,5-1,9µ/ 10ml 25 mg/ml COOH funct 175,00 










PMN-1.0 1,0-1,4µ/ 10ml 25 mg/ml NH2 funct. 169,00 







Magnetizable Fluorescent Polystyrene Microparticles, supplied as 10mg/ml suspension 

Cat. # Size/quantity chemistry/color Euro 

PFAM-2052 2,0-2,9µ/ 2ml NH2 yellow 195,00 

PFAM-2058 2,0-2,9µ/ 2ml NH2 pink 195,00 

PFAM-4056 4,5-4,9µ/ 2ml NH2 nile red 195,00 

PFCM-1052 1,0-1,4µ/ 2ml COOH yellow 195,00 

PFCM-1058 1,0-1,4µ/ 2ml COOH pink 195,00 



PFCM-4056 4,5-4,9µ/ 2ml COOH nile red 245,00 






Magnet Separation Rack 


necessary. 

This acrylic 10 place rack allows the simultaneous separation of 5 x 1,5/2,0ml microcentrifuge tubes 

and the storage of 5 x 1,5/2,0ml tubes in a 

Cat. # Description quantity Euro 

MR-10 Magnet Separation Rack 1 34,90 



efective, simple , reproducable ways and by using automatisation systems. The large surface area of 

50m2/g provides a high capacity to bind cells, bacteria, DNA/RNA , proteines or antibodies. 


magnet separation. The are supolied in double destilled H2O, but can be offered in powder form on 

request. 




GuSNC. 







available on request: magnetic silica beads with Protein A andG, Oligo(dt), calf tymus DNA, Albumin 

and GaM (Fc). 

Cat.# size/ quantity Functional Gr/Concentr. Euro 

PMSi-H.25-5 0,25µ / 5ml Silanol, 50mg/ml 96,65 



PMSi-H1.0-5 1,0µ / 5ml Silanol, 50mg/ml 96,65 

PMSi-ROB.5-5 0,5µ / 5ml Silanol, 50mg/ml 96,65 


PMSi-ROB1.0-5 1,0µ / 5ml Silanol, 50mg/ml 96,65 

PMSi-CH.25-5 0,25µ / 5ml Carboxyl, 25mg/ml 125,00 


PMSi-CH.75-5 0,27#181; / 5ml Carboxyl, 25mg/ml 125,00 

PMSi-CH1.0-5 1,0µ / 5ml Carboxyl, 25mg/ml 125,00 

PMSi-CM1.0-5 1,0µ / 5ml Chloromethyl 25mg/ml 135,00 

PMSi-Cy.5-5 0,5µ / 5ml Cyanuric, 25mg/ml 125,00 


PMSi-Cy1.0-5 1,0µ / 5ml Cyanuric, 25mg/ml 125,00 

PMSi-AM.5-5 0,5µ / 5ml Amino, 25mg/ml 119,00 


PMSi-AM1.0-5 1,0µ / 5ml Amino, 25mg/ml 119,00 

PMSi-PoGl.5-5 0,5µ / 5ml Polyglutaraldehyde, 25mg/ml 125,00 




PMSi-PoGl1.0-5 1,0µ / 5ml Polyglutaraldehyde, 25mg/ml 125,00 

PMSi-SA.5-5 0,5µ / 5ml Streptavidine, 10mg/ml 235,00 


PMSi-SA1.0-5 1,0µ / 5ml Streptavidine, 10mg/ml 235,00 

PMSi-B.5-5 0,5µ / 5ml Biotin, 10mg/ml 235,00 


PMSi-B1.0-5 1,0µ / 5ml Biotin, 10mg/ml 235,00 


Cat.# concentration/ quantity Functional Gr/Concentr. Euro 

PMSi-1.5 50mg /ml, 10ml plain 289,00 

PMSi-1.5NH2 50mg /ml, 10ml amino 299,00 

PMSi-1.5COOH 50mg /ml, 10ml carboxy 299,00 

PMSi-1.5SA 10mg /ml 2ml Streptavidin 180,00 

PMSi-1.5A 10mg /ml 5ml Avidin 210,00 

PMSi-1.5PA 10mg /ml 2ml Protein A 180,00 

PMSi-1.5BSA 10mg /ml 5ml Albumin 220,00 

Top of Page 






Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 





Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 





& DNA 

Measurement 






relativly uniform in size, spherical in shape and paramagnetic in nature. The paramagnetic nature of the particles allows them to 

be separated by using a magnet but the particles will resuspend easily when removed from the magnet. They will not retain any 


These magnetic particles can be used for cell separation, affinity purification, DNA probe assays, magnetic particle EIA etc. The 

coated magnetic particles are prepared by covalent coupling, concentration is around 2 x 10 8 particles/ml, 0,02% sodium azide 

added.. 
















PMGAM-4 

PMAMC-4 

PMGAR-4 

PMGAH-4 

Mag. Part. Goat anti-mouse IgG (Affinity 

purified, H & L) 

Mag Part. Goat anti-mouse IgG (Aff. purif. 

& cross ads.H&L) 

Magnet Part. Goat ant-rabbit IgG (Affinity 


Mag. Part. Goat anti Human IgG ( Affinity 


file:///F|/Kisker/Kisker/micro_magnetic_particles.htm (1 von 5) [08.12.2005 22:31:56] 

4,0-4,5µ/ 10ml 1,0% 334,90 

4,0-4,5µ/ 10ml 1,0% 363,00 

4,0-4-5µ/ 10ml 1,0% 334,90 

4,0-4,5µ/ 10ml 1,0% 334,90


PMB-1 

PMB-4 

Magnet Part. Biotin covalently coupled to 

BSA coated Mag.Part. 

Mag. Part. Biotin coval. coupled to BSA 

coated Mag.Part. 

1,0-1,9µ/ 10ml 0,5% 194,30 

4,0-4,5µ/ 10ml 1,0% 194,30 

PMPa-4 Magnet Particles Papain coated 4,0-4,5µ/ 2ml 1,0% 204,00 

PMPe-4 Magnet Particles Pepsin coated 4,0-4,5µ/ 2ml 1,0% 204,00 

PMPrA-4 Magnet Particles Protein A coated 4,0-4,5µ/ 5ml 1,0% 255,10 

PMPrG-4 Magnet Particles Protein G coated 4,0-4,5µ/ 5ml 1,0% 306,25 

Available Data sheets: Binding capacity of 1. Avidin Mag.Part/ 2.GaM Mag.Part./ 3.Streptavidin Mag.Part./ 4.Biotin Mag.Part. 






magnet, 50nm and 100nm particles can due to their small size only be seoarated by a "High Gradient 

magnetic Field" device ( HGMF ). They are supplied as aqueous solution in a concentration of 

25mg/ml as plain and 10m 






PMN-50 0,05µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-100 0,10µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-130 0,13µ/ 5ml -NH2- / 10mg/ml 145,00 

PMN-250 0,25µ/ 5ml -NH2- / 10mg/ml 136,00 














file:///F|/Kisker/Kisker/micro_magnetic_particles.htm (2 von 5) [08.12.2005 22:31:56]



particles have the characteristic, to be magnetizated within a magnetic field. So they can be separeted easy within a 

solution. Outside of the magnet field the particles are not magnetic. These particles are made by coating a layer of iron 

oxide and polystyrene onto polystyrene core particles. The particles are useful for cellseparation, coupling of proteines, 

antibodies and DNA, affinity purification and DNA probe assays. The particles are monodisperse with low SD and a CV 

of less than 5%. They are supplied as aqueous solution. 


























Magnetizable Fluorescent Polystyrene Microparticles, supplied as 10mg/ml suspension 

















necessary. 

This acrylic 10 place rack allows the simultaneous separation of 5 x 1,5/2,0ml microcentrifuge tubes 

and the storage of 5 x 1,5/2,0ml tubes in a 





efective, simple , reproducable ways and by using automatisation systems. The large surface area of 

50m2/g provides a high capacity to bind cells, bacteria, DNA/RNA , proteines or antibodies. 


magnet separation. The are supolied in double destilled H2O, but can be offered in powder form on 

request. 




GuSNC. 







available on request: magnetic silica beads with Protein A andG, Oligo(dt), calf tymus DNA, Albumin 

and GaM (Fc). 








PMSi-ROB1.0-5 1,0µ / 5ml Silanol, 50mg/ml 96,65 
















PMSi-PoGl1.0-5 1,0µ / 5ml Polyglutaraldehyde, 25mg/ml 125,00 
















Top of Page 




P.O. Box 1329 


Germany 


Micoparticles 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


These magnetic particles are prepared by coating a layer of iron oxid and polystyrene onto the 

core of the particles. They are relativly uniform in size, spherical in shape and paramagnetic in 

nature. The paramagnetic nature of the particles allows them to be separated by using a magnet 

but the particles will resuspend easily when removed from the magnet. They will not retain any 


These magnetic particles can be used for cell separation, affinity purification, DNA probe assays, 

magnetic particle EIA etc. The coated magnetic particles are prepared by covalent coupling, 

concentration is around 2 x 10 8 particles/ml, 0,02% sodium azide added.. 

The Particles are supplied monodisperse in the described range, the actual size is depending on 

current lot.nr. 


PMAv-1 Magnet Particles Avidin coated 1,0-1,9µ/ 

10ml 


10ml 


10ml 

0,5% 260,00 

1,0% 260,00 

1,0% 348,00 


PMSt-0.7 

PMSt-1.0 

PMSt-1.5 

PMSt-2.0 

Magnet Particles Streptavidin 

coated 


coated 


coated 


coated 

file:///F|/Kisker/Kisker/micro_magnetic_particles_d.htm (1 von 7) [08.12.2005 22:31:57] 

0,7-0,9µ/ 

10ml 

1,0-1,4µ/ 

10ml 

1,5-1,9µ/ 

10ml 

2,0-2,9µ/ 

10ml 

0,5% 260,00 

0,5% 260,00 

0,5% 260,00 

0,5% 260,00


PMSt-3 

PMSt-4 

PMSt-5 

PMSt-6 

PMSt-8 

PMGAM-4 

PMAMC-4 

PMGAR-4 

PMGAH-4 

PMB-1 

PMB-4 

PMPa-4 

PMPe-4 

PMPrA-4 

PMPrG-4 


coated 


coated 


coated 


coated 


coated 

Mag. Part. Goat anti-mouse 

IgG (Affinity purified, H & L) 

Mag Part. Goat anti-mouse IgG 

(Aff. purif. & cross ads.H&L) 

Magnet Part. Goat ant-rabbit 

IgG (Affinity purified H & L ) 

Mag. Part. Goat anti Human 

IgG ( Affinity purified H & L ) 

Magnet Part. Biotin covalently 

coupled to BSA coated 

Mag.Part. 

Mag. Part. Biotin coval. 


Mag.Part. 

Magnet Particles Papain 

coated 

Magnet Particles Pepsin 

coated 

Magnet Particles Protein A 

coated 

Magnet Particles Protein G 

coated 

3,0-3,9µ/ 

10ml 

4,0-4,5µ/ 

10ml 

4,6-5,9µ/ 

10ml 

0,5% 278,00 

1,0% 298,20 

1,0% 342,00 

6,0-8,0µ/ 5ml 1,0% 390,00 

8,0-9,9µ/ 5ml 1,0% 390,00 

4,0-4,5µ/ 

10ml 

4,0-4,5µ/ 

10ml 

4,0-4-5µ/ 

10ml 

4,0-4,5µ/ 

10ml 

1,0-1,9µ/ 

10ml 

4,0-4,5µ/ 

10ml 

1,0% 334,90 

1,0% 363,00 

1,0% 334,90 

1,0% 334,90 

0,5% 194,30 

1,0% 194,30 

4,0-4,5µ/ 2ml 1,0% 204,00 

4,0-4,5µ/ 2ml 1,0% 204,00 

4,0-4,5µ/ 5ml 1,0% 255,10 

4,0-4,5µ/ 5ml 1,0% 306,25 

Available Data sheets: Binding capacity of 1. Avidin Mag.Part/ 2.GaM Mag.Part./ 3.Streptavidin 

Mag.Part./ 4.Biotin Mag.Part. 


file:///F|/Kisker/Kisker/micro_magnetic_particles_d.htm (2 von 7) [08.12.2005 22:31:57]


6. Magnetic particles coated with Pepsin, Papain and Trypsin 7. Protein A coated magnetic 

particles 

Magnetizable Nanoparticles and magnetizable microparticles, Dextran 

based 

The superparamagnetic nanoparticles on basis of Dextran with a size 

of 0,25µ have a magnetitcontent of 90%. While 130nm and 250nm 

particles can be separated easy by a permanent magnet, 50nm and 

100nm particles can due to their small size only be seoarated by a 

"High Gradient magnetic Field" device ( HGMF ). They are supplied 

as aqueous solution in a concentration of 25mg/ml as plain and 10m 






PMN-50 0,05µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-100 0,10µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-130 0,13µ/ 5ml -NH2- / 10mg/ml 145,00 

PMN-250 0,25µ/ 5ml -NH2- / 10mg/ml 136,00 
















In many experiments the careful separation of cells or cellfragmentes is a problem. 

Magnetizable ( paramagnetic ) particles have the characteristic, to be magnetizated 

within a magnetic field. So they can be separeted easy within a solution. Outside of the 

magnet field the particles are not magnetic. These particles are made by coating a layer 

of iron oxide and polystyrene onto polystyrene core particles. The particles are useful for 

cellseparation, coupling of proteines, antibodies and DNA, affinity purification and DNA 

probe assays. The particles are monodisperse with low SD and a CV of less than 5%. 

They are supplied as aqueous solution. 




























Magnetizable Fluorescent Polystyrene Microparticles, supplied as 

10mg/ml suspension 














To separate magnetic particles a high magnetic field as provided by 

strong neodymium magnets is necessary. 

This acrylic 10 place rack allows the simultaneous separation of 5 x 

1,5/2,0ml microcentrifuge tubes and the storage of 5 x 1,5/2,0ml 

tubes in a 






Separation techniques are goinig to be more and more important in 

biotechnology, to get on cost efective, simple , reproducable ways 

and by using automatisation systems. The large surface area of 

50m2/g provides a high capacity to bind cells, bacteria, DNA/RNA , 

proteines or antibodies. 

These paramagnetic uniform non porous silica particles are with 80% 

magnetit content allow simple magnet separation. The are supolied in 

double destilled H2O, but can be offered in powder form on request. 


Silanol:DNA & RNA techniques, purification of genomic DNA, plasmid 

DNA, viral DNA or PCR products. DNA/RNA bind to the silica beads 

under high salt conditions as 4 mol NaL or 5 mol GuSNC. 

Silanol-ROB: especially developed for use of DNA/RNA separation in 

robotic systems. 

Carboxyl: binding of bioactive substances by the Carbodiimide 

methode 





available on request: magnetic silica beads with Protein A andG, 

Oligo(dt), calf tymus DNA, Albumin and GaM (Fc). 







PMSi-ROB.75- 

5 

PMSi-ROB1.0- 

5 

0,75µ / 5ml Silanol, 50mg/ml 96,65 
















PMSi-PoGl.75- 

5 

PMSi-PoGl1.0- 

5 

0,75µ / 5ml Polyglutaraldehyde, 25mg/ml 125,00 






















P.O. Box 1329 


Germany 


Micoparticles 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


These magnetic particles are prepared by coating a layer of iron oxid and polystyrene onto the 

core of the particles. They are relativly uniform in size, spherical in shape and paramagnetic in 

nature. The paramagnetic nature of the particles allows them to be separated by using a magnet 

but the particles will resuspend easily when removed from the magnet. They will not retain any 


These magnetic particles can be used for cell separation, affinity purification, DNA probe assays, 

magnetic particle EIA etc. The coated magnetic particles are prepared by covalent coupling, 

concentration is around 2 x 10 8 particles/ml, 0,02% sodium azide added.. 

The Particles are supplied monodisperse in the described range, the actual size is depending on 

current lot.nr. 



10ml 


10ml 


10ml 

0,5% 260,00 

1,0% 260,00 

1,0% 348,00 


PMSt-0.7 

PMSt-1.0 

PMSt-1.5 

PMSt-2.0 


coated 


coated 


coated 


coated 

0,7-0,9µ/ 

10ml 

1,0-1,4µ/ 

10ml 

1,5-1,9µ/ 

10ml 

2,0-2,9µ/ 

10ml 

file:///F|/Kisker/Kisker/deutsch/micro_magnetic_particles_d.htm (1 von 7) [08.12.2005 22:31:59] 

0,5% 260,00 

0,5% 260,00 

0,5% 260,00 

0,5% 260,00


PMSt-3 

PMSt-4 

PMSt-5 

PMSt-6 

PMSt-8 

PMGAM-4 

PMAMC-4 

PMGAR-4 

PMGAH-4 

PMB-1 

PMB-4 

PMPa-4 

PMPe-4 

PMPrA-4 

PMPrG-4 


coated 


coated 


coated 


coated 


coated 

Mag. Part. Goat anti-mouse 

IgG (Affinity purified, H & L) 

Mag Part. Goat anti-mouse IgG 

(Aff. purif. & cross ads.H&L) 

Magnet Part. Goat ant-rabbit 

IgG (Affinity purified H & L ) 

Mag. Part. Goat anti Human 

IgG ( Affinity purified H & L ) 

Magnet Part. Biotin covalently 


Mag.Part. 

Mag. Part. Biotin coval. 


Mag.Part. 

Magnet Particles Papain 

coated 

Magnet Particles Pepsin 

coated 

Magnet Particles Protein A 

coated 

Magnet Particles Protein G 

coated 

3,0-3,9µ/ 

10ml 

4,0-4,5µ/ 

10ml 

4,6-5,9µ/ 

10ml 

0,5% 278,00 

1,0% 298,20 

1,0% 342,00 

6,0-8,0µ/ 5ml 1,0% 390,00 

8,0-9,9µ/ 5ml 1,0% 390,00 

4,0-4,5µ/ 

10ml 

4,0-4,5µ/ 

10ml 

4,0-4-5µ/ 

10ml 

4,0-4,5µ/ 

10ml 

1,0-1,9µ/ 

10ml 

4,0-4,5µ/ 

10ml 

1,0% 334,90 

1,0% 363,00 

1,0% 334,90 

1,0% 334,90 

0,5% 194,30 

1,0% 194,30 

4,0-4,5µ/ 2ml 1,0% 204,00 

4,0-4,5µ/ 2ml 1,0% 204,00 

4,0-4,5µ/ 5ml 1,0% 255,10 

4,0-4,5µ/ 5ml 1,0% 306,25 

Available Data sheets: Binding capacity of 1. Avidin Mag.Part/ 2.GaM Mag.Part./ 3.Streptavidin 

Mag.Part./ 4.Biotin Mag.Part. 


file:///F|/Kisker/Kisker/deutsch/micro_magnetic_particles_d.htm (2 von 7) [08.12.2005 22:31:59]


6. Magnetic particles coated with Pepsin, Papain and Trypsin 7. Protein A coated magnetic 

particles 

Magnetizable Nanoparticles and magnetizable microparticles, Dextran 

based 

The superparamagnetic nanoparticles on basis of Dextran with a size 

of 0,25µ have a magnetitcontent of 90%. While 130nm and 250nm 

particles can be separated easy by a permanent magnet, 50nm and 

100nm particles can due to their small size only be seoarated by a 

"High Gradient magnetic Field" device ( HGMF ). They are supplied 

as aqueous solution in a concentration of 25mg/ml as plain and 10m 






PMN-50 0,05µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-100 0,10µ/ 5ml -NH2- / 5mg/ml 225,00 

PMN-130 0,13µ/ 5ml -NH2- / 10mg/ml 145,00 

PMN-250 0,25µ/ 5ml -NH2- / 10mg/ml 136,00 
















In many experiments the careful separation of cells or cellfragmentes is a problem. 

Magnetizable ( paramagnetic ) particles have the characteristic, to be magnetizated 

within a magnetic field. So they can be separeted easy within a solution. Outside of the 

magnet field the particles are not magnetic. These particles are made by coating a layer 

of iron oxide and polystyrene onto polystyrene core particles. The particles are useful for 

cellseparation, coupling of proteines, antibodies and DNA, affinity purification and DNA 

probe assays. The particles are monodisperse with low SD and a CV of less than 5%. 

They are supplied as aqueous solution. 




























Magnetizable Fluorescent Polystyrene Microparticles, supplied as 

10mg/ml suspension 














To separate magnetic particles a high magnetic field as provided by 

strong neodymium magnets is necessary. 

This acrylic 10 place rack allows the simultaneous separation of 5 x 

1,5/2,0ml microcentrifuge tubes and the storage of 5 x 1,5/2,0ml 

tubes in a 






Separation techniques are goinig to be more and more important in 

biotechnology, to get on cost efective, simple , reproducable ways 

and by using automatisation systems. The large surface area of 

50m2/g provides a high capacity to bind cells, bacteria, DNA/RNA , 

proteines or antibodies. 

These paramagnetic uniform non porous silica particles are with 80% 

magnetit content allow simple magnet separation. The are supolied in 

double destilled H2O, but can be offered in powder form on request. 


Silanol:DNA & RNA techniques, purification of genomic DNA, plasmid 

DNA, viral DNA or PCR products. DNA/RNA bind to the silica beads 

under high salt conditions as 4 mol NaL or 5 mol GuSNC. 

Silanol-ROB: especially developed for use of DNA/RNA separation in 

robotic systems. 

Carboxyl: binding of bioactive substances by the Carbodiimide 

methode 





available on request: magnetic silica beads with Protein A andG, 

Oligo(dt), calf tymus DNA, Albumin and GaM (Fc). 







PMSi-ROB.75- 

5 

PMSi-ROB1.0- 

5 

















PMSi-PoGl.75- 

5 

PMSi-PoGl1.0- 

5 























P.O. Box 1329 


Germany 


Micoparticles 


These monodisperse polystyrene microparticles, also 

called Latex-microspheres, are used in a wide range of 

immunodiagnostic assays, as size-standards for 

calibration of equipment, in cellbiology applications etc. 

The physical adsorption of the polystyrene particles is 

used to bind ligands to the surface of the particles. 

Some polystyrene particles can be offered with special 

coatings, please ask for quotation. 


PPs-0.05 0,05µ/ 15ml / 2,5% plain 60,80 

PPs-0.1 0,1µ/ 15ml / 2,5% plain 50,10 

PPs-0.2 0,2µ/ 15ml / 2,5% plain 50,10 

PPs-0.4 0,4µ/ 15ml / 2,5% plain 50,10 

PPs-0.6 0,6µ/ 15ml / 2,5% plain 50,10 

PPs-0.8 0,8µ/ 15ml / 2,5% plain 55,75 

PPs-1.0 1,0µ/ 15ml / 2,5% plain 60,80 

PPs-2.0 2,0µ/ 10ml / 2,5% plain 79,80 

PPs-3.0 3,0µ/ 10ml / 2,5% plain 95,80 

PPs-4.0 4,0µ/ 5ml / 2,5% plain 76,20 

PPs-6.0 6,0µ/ 5ml / 2,5% plain 76,20 

PPs-8.0 8,0µ/ 5ml / 2,5% plain 76,20 

PPs-10.0 10,0µ/ 5ml / 2,5% plain 95,80 

file:///F|/Kisker/Kisker/micro_polyst_d.htm (1 von 18) [08.12.2005 22:32:02] 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 



PPs-12.0 12,0µ/ 5ml / 2,5% plain 95,80 

PPs-15.0 15,0µ/ 5ml 2,5% plain 95,80 

PPs-30.0 30,0µ/ 25ml / 5,0% plain 230,00 

PPs-65.0 65,0µ/ 25ml / 5,0% plain 230,00 



carboxyl groups at the surface. They are used for 

passive adsorption or covalent binding of proteins. 


PPs- 

0.05COOH 

PPs- 

0.1COOH 

PPs- 

0.2COOH 

PPs- 

0.4COOH 

PPs- 

0.6COOH 

PPs- 

0.8COOH 

PPs- 

1.0COOH 

PPs- 

2.0COOH 

PPs- 

3.0COOH 

PPs- 

4.0COOH 

0,05µ/ 15ml / 5,0% COOH 135,00 

0,1µ/ 15ml / 5,0% COOH 135,00 

0,2µ/ 15ml / 5,0% COOH 135,00 

0,4µ/ 15ml / 5,0% COOH 135,00 

0,6µ/ 15ml / 5,0% COOH 135,00 

0,8µ/ 15ml / 5,0% COOH 135,00 

1,0µ/ 10ml / 5,0% COOH 143,00 

2,0µ/ 10ml / 5,0% COOH 150,00 

3,0µ/ 10ml / 5,0% COOH 155,00 

4,0µ/ 10ml / 5,0% COOH 155,00 

file:///F|/Kisker/Kisker/micro_polyst_d.htm (2 von 18) [08.12.2005 22:32:02]


PPs- 

6.0COOH 

PPs- 

8.0COOH 

6,0µ/ 10ml / 5,0% COOH 170,00 

8,0µ/ 10ml / 5,0% COOH 170,00 



amino groups at the surface. They are used for covalent 

binding of proteins with the glutaraldehyde methode. 


PPs-0.2NH2 0,2µ/ 10ml / 2,5% NH2 129,00 

PPs-0.5NH2 0,5µ/ 10ml / 5,0% NH2 129,00 

PPs-0.8NH2 0,8µ/ 10ml / 5,0% NH2 129,00 

PPs-1.0NH2 1,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.0NH2 2,0µ/ 10ml / 5,0% NH2 136,00 

PPs-2.5NH2 2,5µ/ 10ml / 5,0% NH2 145,00 

PPs-3.0NH2 3,0µ/ 10ml / 5,0% NH2 149,00 

PPs-3.5NH2 3,5µ/ 10ml / 5,0% NH2 149,00 

PPs-7.0NH2 6,0-7,9µ/ 10ml / 5,0% NH2 195,00 


These particles have CV under 5% and can be used to 

check ot calibrate particel-size-systems. 




PPs-6.0P 6,0µ/ 1000mg plain 269,00 

PPs-8.0P 8,0µ/ 1000mg plain 269,00 

PPs-12.0P 12,0µ/ 1000mg plain 269,00 

PPs-20.0P 20,0µ/ 1000mg plain 269,00 


These polystyrene microparticles are prepared by polymerizing non-fluorescent dye in the 

styrene. The particles are free of solvent commonly found when particles are prepared by 

staining with a solution of dye in inorganic solvent. The intensely colored particles enhance the 

visual detection in assays such as latex agglutination, dipstick and membrane based assays. 










The coated microparticles are prepared either by passive adsorption or covalent coupling 

depending upon the intended applications. The avidin and biotin coated particles are prepared by 

covalent coupling. Even through the 0,7 - 0,9µ Goat anti-mouse IgG coated polystyrene particles 

are prepared by using passive adsorption, the coated particles are stable for several years under 

proper storage conditions. 





Antibody contents 14µg/mg solid, 0,2µg/cm2, 1,5 x 10E4 IgG/particle, binding capacity to IgG- 

FITC 4µg/mg 


PC-Fc-0.8 


polystyrene,affin.pur., Fc specific 

file:///F|/Kisker/Kisker/micro_polyst_d.htm (4 von 18) [08.12.2005 22:32:03] 

0,7-0,9/20ml 0,25 229,00


PC-HL-0.8 

PC-CAHL-0.8 

PC-CAR-0.8 


polystyrene,affin.pur., H & L 





0,7-0,9/20ml 0,25 229,00 

0,7-0,9/20ml 0,25 249,00 

0,7-0,9/20ml 0,25 249,00 









































































The Fluorescent Particles are prepared by either staining the Polystyrene with the fluorophore or 

by polymerizing the fluorophore in styrene in the presence of polystyrene particles. A wide varity 

of fluorescent particles can be prepared ranging in size, type of fluorophore, fluorecent intensity 

and surface functional groups. Most of the used fluorophores are waterinsoluble and therefore 

very stable. These fluorophores incorporated into the particles do not leach and their color and 


The exicitation and emmission data of the fluorecent particles in aqueous solution are shown in 

the figure. The particles are monodisperse, the stated diameters are nominal, the actual diameter 

is stated on each bottle. 


Ex/Em max 

(nm) 



470/480 Yellow 470 – 490 520 FITC 

525/560 Nile red 488 – 540 560 

R-phycoerythrin, Propidium 

Iodide 







Multi-Fluo 360 – 635 400 – 680 


Contains multiple 

fluorophores 

The FITC labeled polystyrene particles can be used as calibration particles for flow cytometry. 

They can also be used to cross calibrate different flow cytometers so that data can be 

normalized. 

Please note, that the size ranges stated below are nominal, the actual size of these 

monodisperse particles is stated on each bottle. 


PFITC-0.8 FITC 0,7 –0,9 0,1 2ml 175,00 

PFITC-2.0 FITC 2,0 - 2,9 0,1 2ml 175,00 

PFITC-3.0 FITC 3,0 – 3,9 0,1 2ml 187,00 

PFITC-5.0 FITC 5,0 – 5,9 0,1 2ml 198,00 

PFITC-7.0 FITC 7,0 – 7,9 0,1 2ml 214,00 

PFITC-8.0 FITC 8,0 – 8,9 0,1 2ml 214,00 


Our calibration particles are designed for routine calibration of flow cytometers and are used 

extensivly for QC and long term performance tracking of flow cytometers. They can also be used 

for routine alignment and calibration in fluorescence and confocal fluorescence microscopy. All 

calibration particles are supplied in dropper bottles containing 5 x10 6 particles. 

Rainbow Calibration Particles are a mixture of fluorophores that allows exitation at any 

wavelength from 365 to 650nm. It enables calibration of all channels of the flow cytometer with 

same set of particles in similiar size, but with different intensities. 

Rainbow Fluorescent Particles are similiar to the above described, exept these represent 

single peak, uniform size particles. The Rainbow fluorescent Particles are usually the brightest 

peak of the corresponding Calibration Particles with the exeption of P-RFPM-3.0, which has 

fluorescent intensity of the stained cells. Since these particles contain single peak with very small 

flluorescence and size CV, they are very useful in the alignment of the optical system of the flow 

cytometer. 



Yellow Calibration Particles are designed for routine calibration of the fluorescin channel. They 

contain a set of similiar size Yellow Particles with different fluorescence intensities. 

Rainbow Linear Calibration Particles are designed to check the linearity of the PMT in the 

linear scale of all available channels.They are also useful for quantifying the DNA content of cells 

stained with Hoechst dye, DAPI, Ethidium bromide, Propidium bromide, YOYO or TOTO. 

Allophycocyanin Calibration Particles contain a mixture of 3.0µ fluorescent particles with 

different intensity in Allophycocyanin channel and can be exited with either a He-Ne laser at 632 

nm or a diode laser at 635nm. 

Blank Calibration Particles are the blank peak of the corresponding Rainbow Calibration 

Particles. These particles can be used to set the threshold of the instrument in each channel. 


P-RCP-2.0 4 peaks 1,8-2,2/ 5ml 285,85 

P-RCP-3.0 6 peaks 3,0-3,4/ 5ml 299,85 

P-RCP8-3.0 8 peaks 3,0-3,4/ 5ml 299,85 

P-RCP-3.5 4 peaks 3,5-4,0/ 5ml 299,85 

P-RCP-6.0 6 peaks 6,0-6,5/ 5ml 315,60 

P-RCP-7.0 5 peaks 6,5-8,0/ 5ml 315,60 









P-RLCP-3.0 

Rainbow Linear Calibration particles, 5 

peaks 

3,0-3,4/ 5ml 299,20 












2. Measuring Molecules of Equivalent Fluorescin ( MEFL ), PE ( MEPE ) and RPE-CY5 (MEPCY 

) using Rainbow Calibration Particles. 


The Pink Fluorescent Particle Kits consist of either 3.6µ or 2,8µ Fluorescent Particles with twelve 

different fluorescence intensities in PE channel. They are designed to simplify the multiplex assay 

development using any flow cytometer. Low cost FITC conjugates can be used for detection. 

They are supplied as kits of either six odd numbered peaks or six even numbered peaks. Four 

different Pink Fluorescent Particle Kits are available for different applications. 

The Yellow Fluorescent Particle Kits consist of 2,8µ and 3,6µ Yellow Fluorescent Particles in 

multiple fluorescence intensities in FITC channels. These two kits can be used to develop 

multiplex assays using either PE or PE-Cy5 tracers for detection. 


% w/v / pack 

size 

Euro 



P-GAMPO3.6Kit 

P-GAMPE3.6Kit 

P-CPO2.8Kit 

P-CPE2.8Kit 

P-S-AO2.8Kit 

P-S-AE2.8Kit 

Goat-anti-Mouse Pink-odd 6 

peaks, 3,6µ 

Goat-anti-Mouse Pink-even 6 

peaks, 3,6µ 

Carboxyl Pink-odd 6 peaks, 

2,8µ 

Carboxyl Pink-even 6 peaks, 

2,8µ 


2,8µ 


2,8µ 

0,1% / 6 x 1ml 572,60 

0,1% / 6 x 1ml 572,60 

0,25% / 6 x 1ml 572,60 

0,25% / 6 x 1ml 572,60 

0,1% / 6 x 1ml 572,60 

0,1% / 6 x 1 ml 572,60 








PFP-00552 Yellow 0,04 –0,06 1 2ml 139,00 

PFP-0252 Yellow 0,1 – 0,3 1 2ml 139,00 


PFP-0552 Yellow 0,4 – 0,6 1 2ml 139,00 


PFP-0852 Yellow 0,7 – 0,9 1 2ml 139,00 







PFP-3052 Yellow 2,5 – 3,4 1 2ml 179,00 

PFP-4052 Yellow 3,5 – 4,5 1 2ml 179,00 

PFP-6052 Yellow 6,0 – 7,9 1 2ml 192,00 

PFP-10052 Yellow 10,0 – 14,0 1 2ml 235,00 

PFP-15052 Yellow 15,0 – 19,0 1 2ml 259,00 

















PFP-00556 Nile red 0,04 –0,06 1 2ml 139,00 

PFP-0256 Nile red 0,1 – 0,3 1 2ml 139,00 

PFP-0856 Nile red 0,7 – 0,9 1 2ml 139,00 



PFP-2056 Nile red 1,7 – 2,2 1 2ml 159,00 

PFP-3056 Nile red 2,5 – 3,4 1 2ml 179,00 

PFP-4056 Nile red 3,5 – 4,5 1 2ml 179,00 

PFP-6056 Nile red 6,0 – 7,9 1 2ml 192,00 


PFP-9056 Nile red 8,0 - 9,9 1 2ml 259,00 


PFP-10056 Nile red 10,0 – 14,0 1 2ml 235,00 

PFP-15056 Nile red 15,0 – 19,0 1 2ml 259,00 








PFP-00558 Pink 0,04 –0,06 1 2ml 139,00 

PFP-0558 Pink 0,4 – 0,6 1 2ml 139,00 



PFP-0858 Pink 0,7 – 0,9 1 2ml 139,00 

PFP-2058 Pink 1,7 – 2,2 1 2ml 159,00 

PFP-4058 Pink 2,5 – 4,5 1 2ml 179,00 

PFP-6058 Pink 6,0 – 7,9 1 2ml 192,00 










PFP-00562 Purple 0,04 –0,06 1 2ml 139,00 

PFP-0262 Purple 0,1-0,3 1 2ml 139,00 

PFP-0562 Purple 0,4 – 0,6 1 2ml 139,00 

PFP-0862 Purple 0,7 – 0,9 1 2ml 139,00 




PFP-4062 Purple 2,5 – 4,5 1 2ml 179,00 







PFP-00570 Sky blue 0,04 –0,06 0,25 2ml 139,00 

PFP-0270 Sky blue 0,1-0,3 0,25 2ml 139,00 

PFP-0570 Sky blue 0,4 – 0,6 1,0 2ml 139,00 

PFP-0870 Sky blue 0,7 – 0,9 1 2ml 139,00 

PFP-2070 Sky blue 1,7 – 2,2 1 2ml 159,00 


PFP-3070 Sky blue 2,5 – 3,4 0,2 2ml 179,00 

PFP-4070 Sky blue 3,5 – 4,5 0,2 2ml 179,00 


PFP-15070 Sky blue 15,0-19,0 0,2 2ml 259,00 



These particles can also be offered as 10% suspension, when higher concentrations for 

production are necessarry. 









In the following chapter we offer some beads of larger sizes but with relative narrow size 

distribution. The offered quantities are laboratory quantities and all beads can be offered as bulk 

quantities also. The beads are used for different applications, e. g. manufacturing of implatates( 

pmma-beads and pharmaceutical synthetic research (polystyrene beads). 










PLPM-100 50 -100µ PMMA 10g 29,00 

PLPM-125 125 - 250µ PMMA p.o.r. 

PLPM-300 200 - 400µ PMMA 10g 29,00 

PLPM-400 400 - 500µ PMMA 10g 29,00 

PLPM-600 500 - 600 µ PMMA 10g 29,00 

PLPM-800 700 - 1000µ PMMA 10g 29,00 


The melamine microparticles ( polymethylenemelamine particles) are made from crosslinked 

melamine and have some advantages depending on the application compared to polystyrene 

particles. They have a higher density ( 1,51g/cm3), are very stable, can be stored unlimited, can 

be resuspended in water, they do not quench in most organic solvents and are heat resistant up 

to 200°C. The melamine microparticles are hydrophilic and monodisperse in water (CV 1-2%). 

The refractive index is 1,68. 


PMa-1.0 1,0µ/ 750mg 210,00 

1,0µ/ 1,5g 395,00 

PMa-2.0 2,0µ/ 750mg 210,00 

2,0µ/ 1,5g 395,00 

PMa-3.0 3,0µ/ 750mg 210,00 

3,0µ/ 1,5g 395,00 

PMa-4.0 4,0µ/ 750mg 210,00 

4,0µ/ 1,5g 395,00 

PMa-5.0 5,0µ/ 750mg 249,00 

5,0µ/1,5g 473,00 

PMa-6.0 6,0µ/ 750mg 249,00 

6,0µ/ 1,5g 473,00 



PMa-7.0 7,0µ/ 750mg 249,00 

7,0µ/ 1,5g 473,00 

PMa-8.0 8,0µ/ 750mg 249,00 

8,0µ/ 1,5g 473,00 

PMa-9.0 9,0µ/ 750mg 249,00 

9,0µ/ 1,5g 473,00 

PMa-10.0 10,0µ/ 750mg 270,00 

10,0µ/ 1,5g 515,00 


These fluorescent microparticles have same basic characteristics as the powdered melamine 

microparticles. They are useful e.g. in diagnostic assays, protein binding procedures, size 

standards in microscopy applications as tracers and indicators, wherever a single particel must 

be identified in mixt medium. All fluorescent microparticles are supplied as 2,5% aqueous 





Additional available microspheres are: Acridine orange and Ethidium bromide marked 

microspheres, please ask for available size and price. 





























Our Particle size standards are made from Polystyrene (Ps) or crosslinked Melamin (Mf) . We 

offer this superior grade of particles in the widest range from 0,1µ to 15µ of certified particles 

available today. Each lot of the NIST Certified Particles is characterized by documented methods, 

based on the NIST (National Institute of Standards and Technology) and. CRB ( Community 

Bureau of Reference ) as TEM, REM and Coulter Counter. 

For each particle size standard we supply a certificate of analysis, which documents the most 

important characteristics and physical data like number of particles, particle size, standard 

deviation ( SD ), Coefficient of Variance ( CV ), specific weight, refractive index, bead density and 

more. 

The particle size standards are supplied as 2% or 3% suspension in deionized water. The 

CV is depending on each size at 1 - 3,5% 





PNPs-0.1 0,1µ/10ml/2% Ps 210,00 

PNPs-0.5 0,5µ/10ml/2% Ps 210,00 

PNPs-1.0 1,0µ/10ml/2% Ps 210,00 

PNPs-1.5 1,5µ/10ml/2% Ps 259,00 

PNMf-2.0 2,0µ/10ml/2% Mf 259,00 

PNMf-2.5 2,5µ/10ml/2% Mf 259,00 

PNMf-3.0 3,0µ/10ml/2% Mf 259,00 

PNMf-3.5 3,5µ/10ml/2% Mf 259,00 

PNMf-4.0 4,0µ/10ml/2% Mf 259,00 

PNPs-4.0 4,0µ/10ml/2% Ps 259,00 

PNMf-4.5 4,5µ/10ml/2% Mf 259,00 

PNMf-5.0 5,0µ/10ml/2% Mf 259,00 

PNMf-5.5 5,5µ/10ml/2% Mf 259,00 

PNMf-6.0 6,0µ/10ml/2% Mf 259,00 

PNMf-7.0 7,0µ/10ml/2% Mf 259,00 

PNMf-8.0 8,0µ/10ml/2% Mf 259,00 

PNMf-9.0 9,0µ/10ml/2% Mf 259,00 

PNMf-10.0 10,0µ/10ml/2% Mf 295,00 

PNPs-15.0 15,0µ/20ml/3% Ps 345,00 

PNPs-20.0 20,0µ/20ml/3% Ps 365,00 

PNPs-40.0 40,0µ/20ml/3% Ps 385,00 

PNPs-50.0 50,0µ/20ml/3% Ps 385,00 

PNPs-75.0 75,0µ/20ml/3% Ps 395,00 




file:///F|/Kisker/Kisker/deutsch/micro_silicia_d.htm 


P.O. Box 1329 


Germany 





phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


These monodisperse silica particles with a density of 2,0g/cm3 are simple to dispense and to 

separate. While polystyrene particles (d= 1,04) are difficult to separate by centrifugation under a 

size of 0,5 µ, silica particles do set down easy and are easy to resuspend. The silica particles are 

stabel in water and organic solvents, produced under a new dying method. Silca particles are 

easy to functionalize and available as fluorescent particles. They are useful for coupling of DNA, 

oligonucleotides, oligopeptides, proteines, lectines and antibodies. 

The fluorescent silica-particles are also available with different functional groups as-NH2, and - 

COOH. 

Non fluorescent silica particles are also available with e.g.albumin, protein A, epoxy, NHS, NTA, 

EDTA and others. Please ask for quotation. 















file:///F|/Kisker/Kisker/deutsch/micro_silicia_d.htm (1 von 15) [08.12.2005 22:32:06]




















PSi-0.2NH2 0.2µ/ 5ml NH2 74,15 

PSi-0.3NH2 0.3µ/ 5ml NH2 74,15 

PSi-0.35NH2 0,35µ/ 5ml NH2 74,15 

PSi-0.4NH2 0.4µ/ 5ml NH2 74,15 

PSi-0.5NH2 0,5µ/ 5ml NH2 74,15 

PSi-0.8NH2 0,8µ/ 5ml NH2 81,80 

PSi-1.0NH2 1,0µ/ 5ml NH2 81,80 

PSi-1.5NH2 1,5µ/ 5ml NH2 81,80 

PSi-3.0NH2 3,0µ/ 5ml NH2 81,80 

PSi-4.0NH2 4.0µ/ 5ml NH2 81,80 



PSi-5.0NH2 5,0µ/ 5ml NH2 81,80 

PSi-10.0NH2 10.0µ/ 5ml NH2 89,50 

PSi-15.0NH2 15,0µ/ 5ml NH2 99,70 

PSi-20.0NH2 20,0µ/ 5ml NH2 107,35 



























































Silica Particles, plain, fluorescent-green, Excitation/Emmission: 

485/510nm 












Silica Particles, Amino modified, fluorescent-green, 

Excitation/Emmission: 485/510nm 




























Silica Particles, Amino modified, fluorescent red, Excitation/Emmission: 

569/585nm 





























Here we offer hollow glass beads of different sizes. PGBH-11 and PGH-18 are made from 

boresilicat, non porous, chemical inert and appears as white powder. 



PBGH-11 11µ/1,1g/cm3 5g 19,90 

PBGH-18 18µ/0,6g/cm3 5g 19,90 



PBGH-10 0,5-10µ/2,5g/cm3 10g 19,90 

Glass Beads 

This serie of glass beads is designed for applications where inorganic beads with high density are 

required. The glass beads are manufactured from high pure raw materials and have a pure and 

shining surface. The density is 2,5 g/cm3, chemical characterisation is 72% SiO2, 13% Na2O, 

9% CaO. The glass beads are PbO free. The glass beads are mainly round above 250 µ = 95%. 

For your convenience we have listed in the table the nominal number of beads/g. This number is 

a guideline only. 







We also can offer on request Zirconium silicate (density 3,8g/cm3) and Zirconium silicate, Yttrium 

stabilized ( density 6,0g/cm3). These beads are used as grinding media in pest controlo, 

cosmetics and pharmaceutical industry. 


PGB-05 10 - 50µ 50g 2,4 x 10E7 20,40 

PGB-07 40 - 70µ 50g 7,0 x 10E6 20,40 

PGB-011 70-110µ 50g 1,0 x 10E6 20,40 

PGB-015 90-150µ 50g 7,0 x 10E5 20,40 

PGB-020 100-200µ 100g 2,8 x 10E5 20,40 

PGB-025 150-250µ 100g 6,2 x 10E4 20,40 

PGB-030 200-300µ 100g 95.000 20,40 

PGB-040 300-400µ 100g 21.000 20,40 

PGB-050 250-500µ 100g 14.500 20,40 

PGB-060 400-600µ 100g 6.000 27,60 

PGB-075 500-750µ 100g 3.100 27,60 

PGB-100 750-1.000µ 100g 1.500 27,60 

PGB-125 1.00-1.25 mm 100g 760 27,60 

PGB-155 1.25-1.55 mm 200g 220 16,60 

PGB-185 1.55-1.85 mm 200g 191 16,60 

PGB-200 1.70-2.00 mm 200g 95 16,60 



PGB-230 2.00-2.30 mm 200g 86 16,60 

PGB-260 2.30-2.60 mm 200g 48 16,60 

PGB-285 2.50-2.80 mm 200g 39 16,60 

PGB-330 2.85-3.30 mm 200g 28 16,60 

PGB-380 3.30-3.80 mm 200g 19 16,60 

PGB-430 3.80-4.30 mm 200g 12 16,60 


This serie of glass beads are made in high precision with diameter deviation of 20 nm only. They 

have an very high grade of roundness and are polished fine matt. 

The density is 2,5 g/cm3, chemical characterisation: soda lime glass 69.2% SiO2, 11.4% K2O, 

6.85% Na2O, 5.98% BaO, 2.45% CaO, 41% Al2O3, 9% CaO, 0.95 TiO2, 0.95 ZnO, 0,48% 

B2O3, 0.25%Sb2O3, 0,014%Fe2O3. For your convenience we have listed in the table the 

nominal number of beads/kg. This number is a guideline only. 

These beads are also available on request in Borosilicate glass and as solid colored glas 

transparent or opaque. 



PGBP-08 0,8 mm 500 beads 1.492.000 49,00 

PGBP-1 1,0 mm 500 beads 763.900 49,00 


PGBP-2 2,0 mm 500 beads 49,00 


PGBP-3 3,0 mm 500 beads 28.300 55,00 


PGBP-4 4,0 mm 500 beads 12.300 55,00 


PGBP-5 5,0 mm 500 beads 6.100 59,00 


PGBP-6 6,0 mm 500 beads 59,00 


PGBP-7 7,0 mm 200 beads 2.220 49,00 




PGBP-8 8,0 mm 200 beads 1.490 69,00 


PGBP-9 9,0 mm 200 beads 1.040 69,00 


PGBP-10 10,0 mm 100 beads 48,00 


PGBP-11 11,0 mm 100 beads 57,00 


PGBP-12 12,0 mm 100 beads 75,00 



Our Gold Particles are of highest quality and can be used in production 

of diagnostic tests as well as conjugation studies of proteins and 

antibodies. The particles have a very narrow size distribution ( CV 

between 10% and 20% depending on size ) and are available from 2nm 

to 250nm. They are supplied in 100ml solution at optical density of 1.0, 

measured at 520nm. The number of particles/ml is given in the 




PGO-2 2nm 15,0 x 10 13 210,00 

PGO-5 5nm 5,0 x 10 13 210,00 

PGO-10 10nm 5,7 x 10 12 210,00 

PGO-15 15nm 1,4 x 10 12 210,00 

PGO-20 20nm 7,0 x 10 11 210,00 

PGO-30 30nm 2,0 x 10 11 210,00 

PGO-40 40nm 9,0 x 10 10 210,00 

PGO-50 50nm 4,5 x 10 10 210,00 

PGO-60 60nm 2,6 x 10 10 210,00 

PGO-80 80nm 1,1 x 10 10 210,00 

PGO-100 100nm 5,6 x 10 9 210,00 

PGO-150 150nm 1,7 x 10 9 210,00 



PGO-200 200nm 7,0 x 10 8 210,00 

PGO-250 250nm 3,6 x 10 8 210,00 


It is necessary to use "biodegradable particles" in a lot applications. Our particles are 

made from polylactide with a denmsity of 1,02. They are supplied in 1% aqueous 

suspension (10 mg/ml) and are stable at neutral pH for at least 3 monthes. Degradation 

starts through basic or acid pH or enzymatic hydrolysis. The particles are available in a 

variety of sizes, chemistries and fluorescent colors. 


PBD-0.25 0,25µ/ 10ml plain 127,30 

PBD-2.0 2,0µ/ 10ml plain 101,70 

PBD-20.0 20,0µ/ 10ml plain 112,00 

PBD-30.0 30,0µ/ 10ml plain 117,00 

PBD-100.0 100,0µ/ 10ml plain 122,20 

PBD-NH-0.25 0,25µ/ 10ml NH2 184,00 

PBD-NH-2.0 2,0µ/ 10ml NH2 148,30 

PBD-NH-20.0 20,0µ/ 10ml NH2 152,90 

PBD-NH-30.0 30,0µ/ 10ml NH2 168,70 

PBD-NH-100.0 100,0µ/ 10ml NH2 184,00 

PBD-CO-0.25 0,25µ/ 10ml COOH 184,00 

PBD-CO-2.0 2,0µ/ 10ml COOH 148,30 

PBD-CO-20.0 20,0µ/ 10ml COOH 152,90 

PBD-CO-30.0 30,0µ/ 10ml COOH 168,70 

PBD-CO-100.0 100,0µ/ 10ml COOH 184,00 

















PBD-R-0.25 0,25µ/ 10ml red 225,00 

PBD-R-2.0 2,0µ/ 10ml red 184,00 

PBD-R-30.0 30,0µ/ 10ml red 204,50 

PBD-R-100.0 100,0µ/ 10ml red 225,00 

PBD-B-0.25 0,25µ/ 10ml blue 225,00 

PBD-B-2.0 2,0µ/ 10ml blue 184,00 

PBD-B-30.0 30,0µ/ 10ml blue 204,50 

PBD-B-100.0 100,0µ/ 10ml blue 225,00 




Our uniform monodisperse alumina nanospheres and microspheres 

have been used in various applications due to the size uniformity, the 

high degree of particle sphericity (as result, high flowability and high 

packing density) 

properties of alumina: such as high thermal conductivity, heat 

resistance, hardness etc. 

These particles often used as a fillers with high thermal conductivity, 

for example, those fillers for thermal conductivity sheets 







PAl-0,1 0,1µ/ 10ml plain 398,00 

PAl-0.5 0.5µ/ 10ml plain 298,00 

PAl-1.0 1.0µ/ 10ml plain 370,00 

PAl-2,5 2,5µ/10ml plain 370,00 

PAl-3.0 3,0µ/ 10ml plain 370,00 

PAl-3.5 3,5µ/ 10ml plain 370,00 

PAl-4,0 4,0µ/10ml plain 370,00 

PAl-4.5 4,5µ/ 10ml plain 420,00 

PAl-7.0 7,0µ/ 10ml plain 420,00 

PAl-8,0 8,0µ/10ml plain 420,00 

PAl-9.0 9,0µ/ 10ml plain 420,00 

PAl-10.0 10,0µ/ 10ml plain 470,00 

PAl-15.0 15,0µ/ 10ml plain 470,00 

PAl-20.0 20,0µ/ 10ml plain 470,00 

PAl-30.0 30,0µ/ 10ml plain 470,00 

PAl-40.0 40,0µ/ 10ml plain 470,00 

PAl-50.0 50,0µ/ 10ml plain 470,00 










Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 





LabelGuard TM Mikroliter Messzelle Die Innovation für die DNA Analytik 









Der innovative Lichtweg der Messzelle ermöglicht die exakte Messung 

kleinster Volumina von 3-5 µl in beinahe jedem handelsüblichen UV/Vis 

Spektrophotometer. Der Lichtweg von 1mm erspart dem Anwender die 

fehleranfällige und zeitintensive Verdünnung der Probe. Darüber hinaus 

kann die Probe nach der Messung ohne weiteres für die weitere 

Verarbeitung zurückgewonnen werden. 

Die Routine: 

Einfache und effizienter geht es nicht: 

Die erste Messung in 5, jede weitere in 4 Schritten 

Schritt 1 

file:///F|/Kisker/Kisker/mikroliter-messzelle.htm (1 von 2) [08.12.2005 22:32:08] 

Das Prinzip 

Positionieren Sie die Mikroliter 

Messzelle in Richtung des 

Lichtwegs Ihres 

Spektralphotometers


Schritt 2 

Pipettieren Sie 3-5 µl Probe auf 

das Zentrum des Messfensters 

Schritt 4 

Nehmen Sie den Deckel ab, 

gewinnen Sie auf Wunsch Ihre 

Probe zurück und reinigen Sie 

das Messfenster mit einem 

Wattestäbchen oder fusselfreien 

Tuch 

Die Applikationen: 

Optimieren Sie Ihre Ergebnisse und vermeiden Sie Fehlexperimente: 

Schritt 3 

Setzen Sie den Deckel zur 

Messung auf. 

Positionierungshilfen garantieren 

die exakte Geometrie für die 

Messung 

Drücken Sie "Messen" an Ihrem 

Photometer 

Schritt 5 

Entfernen Sie eventuelle 

Rückstände auf dem Spiegel mit 

Druckluft oder einem 

Wattestäbchen Sie sind bereit für 

die nächste Messung 

Die LabelGuard Mikroliter Messzelle ist unter anderem für folgende Applikationen geeignet: 

● DNA/RNA Reinheits- und Gehaltsbestimmung 

● Bestimmung der Labelingeffizienz für Microarray Experimente 

● Proteinbestimmungen 

❍ A280 

❍ BCA 

❍ Bradford 

❍ Lowry, etc. 

● Zellkulturen 

● Sämtliche UV/Vis Messungen im Bereich 190 bis 1100 nm 

Die Spezifikationen: 

● Wellenlängenbereich: 190-1100 nm 

● Volumen: 3-5 µl 

● Optische Pfadlänge: 1 mm (+/- 0.02 mm) 

● Temperaturbereich: 5 bis 50°C 

● Dimensionen: 

❍ 12.5 x 12,5 x 87.0 mm (8.5 mm Zentrumshöhe) 

❍ 12.5 x 12,5 x 93.5 mm (15 mm Zentrumshöhe) 


Bestellinformation: 

LG100UV LabelGuard TM Mikroliter Messzelle 

Top of Page 

file:///F|/Kisker/Kisker/mikroliter-messzelle.htm (2 von 2) [08.12.2005 22:32:08] 

Expertenlösungen von IMPLEN


Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 














Der innovative Lichtweg der Messzelle ermöglicht die exakte Messung 

kleinster Volumina von 3-5 µl in beinahe jedem handelsüblichen UV/Vis 

Spektrophotometer. Der Lichtweg von 1mm erspart dem Anwender die 

fehleranfällige und zeitintensive Verdünnung der Probe. Darüber hinaus 

kann die Probe nach der Messung ohne weiteres für die weitere 


Die Routine: 

Das Prinzip 

file:///F|/Kisker/Kisker/deutsch/mikroliter-messzelle.htm (1 von 3) [08.12.2005 22:32:09]




Schritt 2 

Pipettieren Sie 3-5 µl Probe auf 

das Zentrum des Messfensters 

Schritt 4 

Nehmen Sie den Deckel ab, 

gewinnen Sie auf Wunsch Ihre 

Probe zurück und reinigen Sie 

das Messfenster mit einem 

Wattestäbchen oder fusselfreien 

Tuch 



Schritt 1 

Positionieren Sie die Mikroliter 

Messzelle in Richtung des 

Lichtwegs Ihres 

Spektralphotometers 

Schritt 3 

Setzen Sie den Deckel zur 

Messung auf. 

Positionierungshilfen garantieren 

die exakte Geometrie für die 

Messung 

Drücken Sie "Messen" an Ihrem 

Photometer 

Schritt 5 


Rückstände auf dem Spiegel mit 

Druckluft oder einem 

Wattestäbchen Sie sind bereit für 

die nächste Messung 





❍ A280 

❍ BCA 

❍ Bradford 














file:///F|/Kisker/Kisker/deutsch/mikroliter-messzelle.htm (2 von 3) [08.12.2005 22:32:09]



Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/mikroliter-messzelle.htm (3 von 3) [08.12.2005 22:32:09] 




P.O. Box 1329 


Germany 

zurück zur Webseite Druck starten 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 




● Kompatibel mit den meisten 

Qualitätsspektrophotometern 

(Wellenlängenbereich 190-1100 

nm) 

● Rückgewinnung der Probe zur 

Weiterverarbeitung möglich 


● in der Regel keine 

Probenverdünnung notwendig 


● Schnell zu reinigen, keine 


Der innovative Lichtweg der Messzelle 

ermöglicht die exakte Messung 

kleinster Volumina von 3-5 µl in 

beinahe jedem handelsüblichen UV/Vis 

Spektrophotometer. Der Lichtweg von 

1mm erspart dem Anwender die 

fehleranfällige und zeitintensive 

Verdünnung der Probe. Darüber hinaus 

kann die Probe nach der Messung 

ohne weiteres für die weitere 


Die Routine: 

Das Prinzip 

file:///F|/Kisker/Kisker/deutsch/mikroliter-messzelle-d.htm (1 von 4) [08.12.2005 22:32:09]




Schritt 2 

Pipettieren Sie 3-5 µl 

Probe auf das Zentrum 

des Messfensters 

Schritt 4 

Nehmen Sie den Deckel 

ab, gewinnen Sie auf 

Wunsch Ihre Probe 

zurück und reinigen Sie 

das Messfenster mit 

einem Wattestäbchen 

oder fusselfreien Tuch 


Schritt 1 

Positionieren Sie die 

Mikroliter Messzelle in 

Richtung des Lichtwegs 

Ihres 


Schritt 3 

Setzen Sie den Deckel 

zur Messung auf. 

Positionierungshilfen 

garantieren die exakte 

Geometrie für die 

Messung 

Drücken Sie "Messen" 

an Ihrem Photometer 

Schritt 5 


Rückstände auf dem 

Spiegel mit Druckluft 

oder einem 

Wattestäbchen Sie sind 

bereit für die nächste 

Messung 








❍ A280 

❍ BCA 

❍ Bradford 




Für optimale Hybridisierungsergebnisse empfehlen wir: 

● Genisphere 3DNA Dendrimer Labeling Kits 

❍ für die Hybridisierung geringster Probenmengen 

❍ optimale Reproduzierbarkeit 

● LifterSlips - die Alternative zum Deckglas 

❍ vereinfachtes Handling für blasenfreies Befüllen 

❍ verbesserte Standardisierung durch definierte 

Geometrie 














Seitenanfang zurück zur Webseite 


file:///F|/Kisker/Kisker/deutsch/mikroliter-messzelle-d.htm (4 von 4) [08.12.2005 22:32:09] 


UV VIS-Spektralphotometer SPEKOL® 1300 Einstrahlsystem, DNA/RNA 

Wir über uns 




Dokumentation 


Thermocycler 

Neuigkeiten 

& Aktionen 

Produkte 

Kontakt & 

Bestellung 

Sitemap Home 


Gel 

Loading 

Tips & 

Pipetten 

Dry Block 

Heat & 

Water Bath 




PCR Tubes & 

Plates 

Mini 

Centrifuges 

Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 





UV VIS-Spektralphotometer SPEKOL ® 1300 Der Riese unter den Kleinen 

Das UV VIS-Spektralphotometer SPEKOL® 1300 ist 

ein Einstrahlsystem für den Bereich von 190 -1100 

nm mit einem einzigartigen Preis- 

Leistungsverhältnis. Das robust entworfene Gerät ist 

kompakt, leicht und einfach zu handhaben. Die 

spektrale Bandbreite von 4 nm ist über dem 

gesamten Wellen-längenbereich konstant. 

Interne Software: 

● Bestimmung der Reinheit und Konzentration 

von DNA/RNA, Oligos und Protein bei 260 

und 280 nm 

● Durchführung von Proteinbestimmung nach 

Bradford, Lowry und BCA sowie 

Zelldichtebestimmung 

● Messung von Transmission, Absorption, 

Konzentration über Faktor, einfachen 

Standard oder lineare Kalibration. 

● Kinetikmessung bei einer Wellenlänge 

● Druck und Speicherung von Methoden und 

Messergebnissen. 

Vielseitige Anwendung: 


● hochauflösenden LCD-VGA- Bildschirm für ausgezeichnete Bildqualität und 

Bedienbarkeit 



Das SPEKOL® 1300 ist ideal zur Nutzung in der Molekularbiologie, Biochemie und Zellbiologie sowie im klinischen Labor, Umweltschutz 

und verschiedenen Feldern zur Qualitätskontrolle. 

Zubehör: Wählen Sie aus dem vielfältigen Zubehör ganz nach Bedarf: 

file:///F|/Kisker/Kisker/deutsch/spektralphotometer-spektol.htm (1 von 2) [08.12.2005 22:32:10]

UV VIS-Spektralphotometer SPEKOL® 1300 Einstrahlsystem, DNA/RNA 

Kat.#: Beschreibung: Preis: 

L-SP-1300 Spekol 1300 UV VIS-Spektralphotometer inkl. 4-x Küvettenwechsler 4.400,00 Euro 

L-60212 Küvettenhalter für 10 mm Schichtdicke 45,00 Euro 

L-60214 4-fach Küvettenhalter für 50 mm Schichtdicke 120,00 Euro 

L-60215 4fach Küvettenhalter für 100 mm Schichtdicke 120,00 Euro 

L-60213 Ø 8-Ø 22 mm Rundküvettenhalter 90,00 Euro 

L-60216 temperierbarer Küvettenhalter für 10 mm Schichtdicke 90,00 Euro 


L-60218 Justierbarer Mikro-Küvettenhalter für Mikroküvetten mit 10mm 360,00 Euro 


L-SP-1300UV VIS-Spektralphotometer SPEKOL ® 1300 

Seitenanfang 

file:///F|/Kisker/Kisker/deutsch/spektralphotometer-spektol.htm (2 von 2) [08.12.2005 22:32:10]





Hybridisation 

Documentation 



News & 

Special offer 

Products 

Contact & 

Order 

Sitemap Home 


Gel Loading 

Tips & 

Pipettors 

Dry Block 

Heat & 

Water Bath 

PCR Tubes & 

Plates 

Mini 

Centrifuges 



Centrifuge 

Tubes 

Rotator, 

Vortexer & 

Shaker 

Rack 

Systems 

Nylon Wool 

& PAP PEN 



& DNA 

Measurement 





SPEKOL ® 1300 The little Giant with great performance 

The UV VIS-Spectrophotometer SPEKOL® 1300 is a 

single-beam-system for the range of 190 -1100 nm 

with an outstanding price-performance ratio. The 

ruggedly designed photometer is compact, lightweight 

and easy to use. The internal RS-232 serial interface 

enables the instrument to be connected to a printer. 4 

nm spectral bandwidth are constant over the entire 

wavelength range. 

Internal Software: 

● Measurement of puruty and concentration of 

DNA/RNA, Oligos and Protein at 260 and 280 

nm. 

● Protein measurement according to Bradford, 

Lowry and BCA, Cell density measurement 

● Measurement of transmittance, absorbance or 

concentration via factor, simple atandard or 

linear calibration. 

● Spectrum scanning, kinetik fixed wavelenght 

scans with one ort wo additional wavelenghts. 

● Printing of methods and measurement results. 

Manifold Applications: 


● high resolution LCD-VGA- screen for superb images and easy operation 



SPEKOL® 1300 is perfect for use in molecular biology, biochemistry and cell biology as well as in clinical laboratory, environmental 

protection and various fields of quality control 

Accessories: Choose the accessories for your individual analytical needs: 

file:///F|/Kisker/Kisker/spektralphotometer-spektol.htm (1 von 2) [08.12.2005 22:32:11]


Cat.#: Description: Price: 

L-SP-1300 Spekol 1300 UV VIS-Spectrophotometer incl. 4-x cell holder 4.400,00 Euro 

L-60212 Cell holder for 10 mm 45,00 Euro 

L-60214 4-fold cell holder for 50 mm 120,00 Euro 

L-60215 4fach cellholder for 100 mm 120,00 Euro 

L-60213 Ø 8-Ø 22 mm round cell holder 90,00 Euro 

L-60216 water jacketed cell holder for 10 mm 90,00 Euro 

L-60217 Water juacketed cell holder for 50 mm 150,00 Euro 

L-60218 adjustable micro-cell holder for micro cells with 10mm 360,00 Euro 

Order information: 


Top of Page 

file:///F|/Kisker/Kisker/spektralphotometer-spektol.htm (2 von 2) [08.12.2005 22:32:11]



P.O. Box 1329 


Germany 


SPEKOL ® 1300 The little Giant with great performance 

The UV VIS-Spectrophotometer SPEKOL® 1300 

is a single-beam-system for the range of 190 - 

1100 nm with an outstanding price-performance 

ratio. The ruggedly designed photometer is 

compact, lightweight and easy to use. The 

internal RS-232 serial interface enables the 

instrument to be connected to a printer. 4 nm 

spectral bandwidth are constant over the entire 

wavelength range. 

Internal Software: 

● Measurement of puruty and concentration 

of DNA/RNA, Oligos and Protein at 260 

and 280 nm. 

● Protein measurement according to 

Bradford, Lowry and BCA, Cell density 

measurement 

● Measurement of transmittance, 

absorbance or concentration via factor, 

simple atandard or linear calibration. 

● Spectrum scanning, kinetik fixed 

wavelenght scans with one ort wo 

additional wavelenghts. 

● Printing of methods and measurement 

results. 

Manifold Applications: 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 



● high resolution LCD-VGA- screen for superb images and easy operation 



SPEKOL® 1300 is perfect for use in molecular biology, biochemistry and cell biology as well as in clinical laboratory, environmental 

protection and various fields of quality control 

Accessories: Choose the accessories for your individual analytical needs: 

Cat.#: Description: Price: 

L-SP-1300 Spekol 1300 UV VIS-Spectrophotometer incl. 4-x cell holder 4.400,00 Euro 

L-60212 Cell holder for 10 mm 45,00 Euro 

L-60214 4-fold cell holder for 50 mm 120,00 Euro 

L-60215 4fach cellholder for 100 mm 120,00 Euro 

L-60213 Ø 8-Ø 22 mm round cell holder 90,00 Euro 

L-60216 water jacketed cell holder for 10 mm 90,00 Euro 

L-60217 Water juacketed cell holder for 50 mm 150,00 Euro 

L-60218 adjustable micro-cell holder for micro cells with 10mm 360,00 Euro 

file:///F|/Kisker/Kisker/spektralphotometer-spektol-d.htm (1 von 2) [08.12.2005 22:32:11]


Order information: 




file:///F|/Kisker/Kisker/spektralphotometer-spektol-d.htm (2 von 2) [08.12.2005 22:32:11]



P.O. Box 1329 


Germany 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


UV VIS-Spektralphotometer SPEKOL ® 1300 Der Riese unter den Kleinen 

Das UV VIS-Spektralphotometer SPEKOL® 1300 

ist ein Einstrahlsystem für den Bereich von 190 - 

1100 nm mit einem einzigartigen Preis- 

Leistungsverhältnis. Das robust entworfene Gerät 

ist kompakt, leicht und einfach zu handhaben. Die 

spektrale Bandbreite von 4 nm ist über dem 

gesamten Wellen-längenbereich konstant. 

Interne Software: 

● Bestimmung der Reinheit und 

Konzentration von DNA/RNA, Oligos und 

Protein bei 260 und 280 nm 

● Durchführung von Proteinbestimmung nach 

Bradford, Lowry und BCA sowie 

Zelldichtebestimmung 

● Messung von Transmission, Absorption, 

Konzentration über Faktor, einfachen 

Standard oder lineare Kalibration. 

● Kinetikmessung bei einer Wellenlänge 

● Druck und Speicherung von Methoden und 

Messergebnissen. 

Vielseitige Anwendung: 

Das SPEKOL® 1300 ist ideal zur Nutzung in der 

Molekularbiologie, Biochemie und Zellbiologie 

sowie im klinischen Labor, Umweltschutz und 

verschiedenen Feldern zur Qualitätskontrolle. 


Zubehör: Wählen Sie aus dem vielfältigen Zubehör ganz nach Bedarf: 

● hochauflösenden LCD-VGA- Bildschirm für ausgezeichnete Bildqualität 

und Bedienbarkeit 



Kat.#: Beschreibung: Preis: 

L-SP-1300 Spekol 1300 UV VIS-Spektralphotometer inkl. 4-x Küvettenwechsler 4.400,00 Euro 

L-60212 Küvettenhalter für 10 mm Schichtdicke 45,00 Euro 

L-60214 4-fach Küvettenhalter für 50 mm Schichtdicke 120,00 Euro 

L-60215 4fach Küvettenhalter für 100 mm Schichtdicke 120,00 Euro 

L-60213 Ø 8-Ø 22 mm Rundküvettenhalter 90,00 Euro 



L-60218 Justierbarer Mikro-Küvettenhalter für Mikroküvetten mit 10mm 360,00 Euro 

file:///F|/Kisker/Kisker/deutsch/spektralphotometer-spektol-d.htm (1 von 2) [08.12.2005 22:32:11]






file:///F|/Kisker/Kisker/deutsch/spektralphotometer-spektol-d.htm (2 von 2) [08.12.2005 22:32:11]



P.O. Box 1329 


Germany 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 




● Kompatibel mit den meisten 

Qualitätsspektrophotometern 

(Wellenlängenbereich 190-1100 

nm) 

● Rückgewinnung der Probe zur 

Weiterverarbeitung möglich 


● in der Regel keine 

Probenverdünnung notwendig 


● Schnell zu reinigen, keine 


Der innovative Lichtweg der Messzelle 

ermöglicht die exakte Messung 

kleinster Volumina von 3-5 µl in 

beinahe jedem handelsüblichen UV/Vis 

Spektrophotometer. Der Lichtweg von 

1mm erspart dem Anwender die 

fehleranfällige und zeitintensive 

Verdünnung der Probe. Darüber hinaus 

kann die Probe nach der Messung 

ohne weiteres für die weitere 


Die Routine: 

Das Prinzip 

file:///F|/Kisker/Kisker/mikroliter-messzelle-d.htm (1 von 4) [08.12.2005 22:32:12]




Schritt 2 

Pipettieren Sie 3-5 µl 

Probe auf das Zentrum 

des Messfensters 

Schritt 4 

Nehmen Sie den Deckel 

ab, gewinnen Sie auf 

Wunsch Ihre Probe 

zurück und reinigen Sie 

das Messfenster mit 

einem Wattestäbchen 

oder fusselfreien Tuch 


Schritt 1 

Positionieren Sie die 

Mikroliter Messzelle in 

Richtung des Lichtwegs 

Ihres 


Schritt 3 

Setzen Sie den Deckel 

zur Messung auf. 

Positionierungshilfen 

garantieren die exakte 

Geometrie für die 

Messung 

Drücken Sie "Messen" 

an Ihrem Photometer 

Schritt 5 

file:///F|/Kisker/Kisker/mikroliter-messzelle-d.htm (2 von 4) [08.12.2005 22:32:12] 


Rückstände auf dem 

Spiegel mit Druckluft 

oder einem 

Wattestäbchen Sie sind 

bereit für die nächste 

Messung







❍ A280 

❍ BCA 

❍ Bradford 




Für optimale Hybridisierungsergebnisse empfehlen wir: 

● Genisphere 3DNA Dendrimer Labeling Kits 

❍ für die Hybridisierung geringster Probenmengen 

❍ optimale Reproduzierbarkeit 

● LifterSlips - die Alternative zum Deckglas 

❍ vereinfachtes Handling für blasenfreies Befüllen 

❍ verbesserte Standardisierung durch definierte 

Geometrie 











file:///F|/Kisker/Kisker/mikroliter-messzelle-d.htm (3 von 4) [08.12.2005 22:32:12]





file:///F|/Kisker/Kisker/mikroliter-messzelle-d.htm (4 von 4) [08.12.2005 22:32:12] 




P.O. Box 1329 


Germany 


PAP PEN 

PAP PEN is designed to provide a water 

repellant barrier when a circle is drawn around 

a specimen. The barrier of the PAP PEN 

retains antisera within the defined area and 

ensures, that only the amount of antobody 

needed for sufficient reaction is used. The PAP 

PEN stops spreading, reduces waste and 

divides slides into discret areas for 

immunostaining, histology, cytology, cell 

culture, virology, microbiology. The PAP PEN 

is effective for immunostaining, PAP method, 

ABC method, ASD method, enzyme and 

frozen section methods. 

The staining is unsoluble in aceton and alcohol 

and can be removed if desired by xylene after 

the staining procedure. 



MKP-2 

Pap Pen Immunostaining Pen, 

extra thick 

58,90 


The slide boxes have cork liming on the bottom, to protect the slides. 

On the inside cover of the box is a corresponding inventory slide 

sheet. The boxes can be stored securely on top of each other and 

are closed with a rust resistant nickel plated clasp ande hinge 

pin.Dimensions are 222 x 171 x 33mm ( LxWxH ) 

Optional we offer stainless steeel freezer racks to store the slide 

boxes in upright freezers for longtime storage of temperature 

sensitive samples. You find infos and prices in the chapter CRYO 

PRODUCTS. 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 



file:///F|/Kisker/Kisker/deutsch/nylon_d.htm (1 von 3) [08.12.2005 22:32:13]


R100-B blue 1 5,95 

R100-G green 1 5,95 

R100-Y yellow 1 5,95 

R100-R red 1 5,95 

R100-W white 1 5,95 

R100-GRA grey 1 5,95 




Mononuclear leukocyte concentrates from freshly drawn blood can be separated into T-cell and Bcell 

enriched fractions using "Nylon Wool " Mononuclear lymphoid cells may be preseparated 

from the polymorphonuclear (PMN) leukocytes and contaminating erythrocytes by centrifugation 

on an isopynknotic solution of IsoPrep (specific gravity 1.077gm/liter). If an isopynknotic solution 

is not used, the polymorphonuclear (PMN) leucocytes will adhere tightly to the nylon wool, while 

any erythrocytes will be eluted with the nonadherent cell fraction. Prior to the fractionation 

procedure, the mononuclear cells are washed once in Hank`s Balanced Salt Solution, counted 

and resuspended in Hank`s Balanced Salt Solution supplemented with 10% fetal calf serum 

(FCS) or in other cell growth media like RPMI 1640 with 10% FCS, Earl`s Saline with 10% FCS 

or Dulbecco`s PBS with 5% FCS. 

Our Nylon wool works well with e.g. human, mouse and rat cells. Please see also: current 

protocols in Immunology (1992) 3.2.1-3.2.4, contributed by K.S.Hathcock, T-Cell Enrichment by 

nonadherence to Nylon, John Wiley & Sons, Inc. 



Pack tightly 0,5gram of sterile Nylon wool to a 10ml sterile syringe. 

Wash and equilibrate the Nylon Wool with selected media HBSS or 

RPMI 1640 with 10% FCS. 

1-2 x 108 mononuclear cells suspended in 2ml of media are pipetted 

onto 0,5grams of sterile Nylon wool. 


Collect nonadherent T-cells by washing with HBSS and resuspend. 

Do not plunge. 

B-Cells are reduced in the syringe up to 3%, larger numbers of cells 

may be separated, when the amount of nylon wool (e.g.1g) and the 

size of the syringe is proportionally increased or by repeating the 

procedure. 


After elution of the not adherent T-cells from the Nylon Wool Fiber, the 



syringes are stoppered and filled with HBSS supplemented with 10% 

FCS. The syringes are opened and sterile plungers of the syringes are 

used to force the medium through the Nylon Wool Fibers. The cells 

are washed once in in HBSS and resuspended. 










P.O. Box 1329 


Germany 


PAP PEN 



















MKP-2 


extra thick 

58,90 


The slide boxes have cork liming on the bottom, to protect the slides. 

On the inside cover of the box is a corresponding inventory slide 

sheet. The boxes can be stored securely on top of each other and 

are closed with a rust resistant nickel plated clasp ande hinge 

pin.Dimensions are 222 x 171 x 33mm ( LxWxH ) 

Optional we offer stainless steeel freezer racks to store the slide 

boxes in upright freezers for longtime storage of temperature 

sensitive samples. You find infos and prices in the chapter CRYO 

PRODUCTS. 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 



file:///F|/Kisker/Kisker/nylon_d.htm (1 von 3) [08.12.2005 22:32:13]


R100-B blue 1 5,95 

R100-G green 1 5,95 

R100-Y yellow 1 5,95 

R100-R red 1 5,95 

R100-W white 1 5,95 

R100-GRA grey 1 5,95 




Mononuclear leukocyte concentrates from freshly drawn blood can be separated into T-cell and Bcell 

enriched fractions using "Nylon Wool " Mononuclear lymphoid cells may be preseparated 

from the polymorphonuclear (PMN) leukocytes and contaminating erythrocytes by centrifugation 

on an isopynknotic solution of IsoPrep (specific gravity 1.077gm/liter). If an isopynknotic solution 

is not used, the polymorphonuclear (PMN) leucocytes will adhere tightly to the nylon wool, while 

any erythrocytes will be eluted with the nonadherent cell fraction. Prior to the fractionation 

procedure, the mononuclear cells are washed once in Hank`s Balanced Salt Solution, counted 

and resuspended in Hank`s Balanced Salt Solution supplemented with 10% fetal calf serum 

(FCS) or in other cell growth media like RPMI 1640 with 10% FCS, Earl`s Saline with 10% FCS 

or Dulbecco`s PBS with 5% FCS. 

Our Nylon wool works well with e.g. human, mouse and rat cells. Please see also: current 

protocols in Immunology (1992) 3.2.1-3.2.4, contributed by K.S.Hathcock, T-Cell Enrichment by 

nonadherence to Nylon, John Wiley & Sons, Inc. 



Pack tightly 0,5gram of sterile Nylon wool to a 10ml sterile syringe. 

Wash and equilibrate the Nylon Wool with selected media HBSS or 

RPMI 1640 with 10% FCS. 

1-2 x 108 mononuclear cells suspended in 2ml of media are pipetted 

onto 0,5grams of sterile Nylon wool. 


Collect nonadherent T-cells by washing with HBSS and resuspend. 

Do not plunge. 

B-Cells are reduced in the syringe up to 3%, larger numbers of cells 

may be separated, when the amount of nylon wool (e.g.1g) and the 

size of the syringe is proportionally increased or by repeating the 

procedure. 


After elution of the not adherent T-cells from the Nylon Wool Fiber, the 



syringes are stoppered and filled with HBSS supplemented with 10% 

FCS. The syringes are opened and sterile plungers of the syringes are 

used to force the medium through the Nylon Wool Fibers. The cells 

are washed once in in HBSS and resuspended. 










P.O. Box 1329 


Germany 




phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


This unique Microplate shaker combines Shaking and Heating. It can either shake or 

heat or shake/heat at same time two/four microplates. It provides shaking action 250 - 

1.200 rpm / 2 mm amplitude. The heat is transfered to the sample from the platform and 

the heated lid. This heating from both sides guarantees a very good temperature 

stability at low evaporation. The temperature can be regulated from 25 °C or RT up to 

60°C. 

All electronical functions including the 96 hour timer are microprocessor controled. 





L079 Shaker/Heater for 2 MTP`s 985,00 

L079-4 Shaker/Heater for 4 MTP`s 1.295,00 


The shaker provides rotary shaking action with 50 - 1.250 r.p.m / 4mm 

amplitude. It is useful for all application like gentle shaking for cultures 

and strong shaking for tubes and MTP`s. The Shaker is 

microprocessor controlled and has a constant speed also at high 

frequency. More important for many applications is the gentle starting 

of the shaking process, which avoids a strong disturbing or squirt out 

of the sample at the start of the shaking action. 







L029 Shaker for 4 Multi-Well Plates 539,00 

L030 Shaker for 4 x 20 1,5ml tubes 539,00 





file:///F|/Kisker/Kisker/rotator_d.htm (1 von 11) [08.12.2005 22:32:15]


New, the small handy microplate shaker for reliable efficient and long life operation. 

Minimal footprint, dimensions 93x133x87mm (WxDxH). Open Construction for easy 

integration with robotic systems. Accomodates all styles of microplates. Momentary 

shaking action, no maintenance required. Brushless DC motor for quiet and reliable 

long life. Variable speed from 950 to 1300rpm, orbit 1mm. Orbis plus with timer 1 to 180 

minutes. 

Low Voltage for added safetey. Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 

Hz 


L070 Microplate shaker 259,0 

L071 Microplate shaker with timer 329,0 

L070-A Tray for 40x1,5/2,0ml tubes 45,00 

L070-D Lid, clear Styrene 33,00 


The personal microplate incubator for reliable efficient and long life operation. Minimal 

footprint, dimensions 120x180x100mm (WxDxH).The use of unique design and 

advanced electronic temerature control circuitry guarantees an outstanding stable and 

accurate performance combined with quiet and long operating life.Temperature range 

5°C above RT to 45°C, build in timer, accomodates all styles of microplates. minumum 

evaporation loses with uncovered plates, no maintenance required. 

Low Voltage for added safetey. Power supply 12Volt 2A DC, 100-230 Volt, 50/60 Hz, 

weight 920g. 


L078 Microplate incubator 426,00 


A small 3D shaker - stainless steel housing, speed can be set stepless 

from 15 - 60 r.p.m, shaking angel 7°, optional platform for 26 tubes 

available 




Cat. # Decription Anschluß Euro 

L040 3D-Shaker 220Volt/50Hz 278,6 









speed 5 - 30 r.p.m, rocking angel 7° 





MINI-Rocker 






external powersupply: 12 Volt, 500mA 


L024 MINI-Rocker 12Volt, 500mA 295,00 

Maxi Rocker 

A shaker in compact design with a smooth running, strong motor; platform with anti-slip 

mat. The shaker is very useful for cold rooms and rooms with high humidity 

dimension 300 x 300mm, rocking angel 5,5° ( on request with 4,5 or 7,5° ) 


loading capacity 5kg 


weight 7 kg, Dimensionen: 335 x335 x 190mm 

Cat. # Decription power Euro 



The Test Tube Rotator provides diffusion, dialysis, extraction or mixing. 

The electronic controlled stepper motor provides speed from 5 - 50 rpm and a timer set up of 0- 

99 hrs, 1-59min. The Test Tube Rotator is easy to handle through "Memory-" and "Restart"functiones 

and exchangable discs for tubes from 4 - 40mm. Angel of rotation can be set from 

27° - 90°; adapters allows the simultaneous run of 2 or 3 discs. 

Specification: dimensions: 200 x 200 x 250 mm (LxWxH); weight.: 3,5 kg; Motor 220Volt, 50Hz 

Cat. # Description quantity x tube Ø Euro 


L009-4 disc (0,5ml) 40 x 4 - 9mm 79,00 

L009-6 disc 30 x 6 - 9mm 79,00 



L009-9 disc (1,5/2,0ml) 20 x 9-12mm 63,80 

L009-12 disc (15ml) 20 x 12-16mm 63,80 

L009-16 disc 20 x 16-19mm 63,80 

L009-19 disc 18 x 19-22mm 63,80 

L009-22 disc 15 x 22-25mm 63,80 

L009-25 disc (50ml) 12 x 25-28mm 63,80 

L009-28 disc 10 x 28-32mm 63,80 

L009-32 disc 10 x 32-40mm 63,80 

L009-A adapter 1 44,00 



A synchronous motor with slow rotation speed of 10 rpm, which permits tube exchange while 

operating. 

The rotating disc can be set continously at an angle between 90 and 27°. The disc has a 

diameter of 




Cat. # Description Quantity x tube Ø Euro 



This is a place saving mixer fore 24 microcentrifuge tubes or 24 x 15ml tubes with 

max. 14mm diameter. 

Specification Standard Rotator: speed 5 – 30 r.p.m digital timer for 24 Std, LED 

display 

weight: 2,0kg, dimension: 225 x 140 x 140mm 



L053-8 platform for 8 tubes up to 30mm Ø 35,00 




This is a place saving mixer for 22 x 1,5/2,0ml microcentrifuge tubes or 22 x 15ml tubes 

up to max. 14mm Ø.. 


specification Multi-Rotator: functiones: rotation, vortexing 0-5°, reciprocal 

overheadmixing 15 - 90°, 


continous run by 24 hr. timer 



L054-N Mini – Multi-Rotator 12 Volt/ 500mA 459,00 

L054-4/12 platform for 4x50/12x1,5-2,0-15ml 35,00 


a compact orbital shaker with 

simple interchangable platforms for 

flasks and plates. 

Shaking speed 50 - 250 rpm with 

digital display and timer 1-24 

hours. 

Amplitude 20mm, maximum 

loading capacity 2,5 kg 

working temperature: 4 - 45°C, non 

condensing 

weight: 2,2kg, dimension 220 x 190 

x 70mm 

Cat. 

# 

description Platform size Euro 

L044 Orbital 

Shaker 

L044- 

F 

L044- 

F/6 

L044- 

F/12 

L044- 

P 

univ.bottle 

platform 

platform for 

platform for 

12Volt,800mA 499,00 

adjustable 

bars 

6 x 250 - 

300ml 

12 x 100 - 

150ml 

platform for petridishes 

etc. 


file:///F|/Kisker/Kisker/rotator_d.htm (5 von 11) [08.12.2005 22:32:15] 

270 x 195mm 79,00 

250 x 190mm 79,00 

250 x 190mm 79,00 

220 x 220mm 30,20


The Orbital shaker MULTI-POWER is an ideal instrument for intensive mixing 

of biological suspensiones or chemical componentes in bigger volumina with a 

total capacity of 15 kg. The shaker can be used continously during several 

days for extractiones, tissue cultures, rotation of closed flasks for dialysis 

Dialyse. 











L048-P Plattform with Anti-slip-mat 430 x 380 mm 96,00 



14 stainless steel rotating bars guarantee an even mixing of samples. The 14 

rolls, size 208 x 10mm(L x Ø) are moved with 10 rpm, rocking frequency is 5 

cycles /minute at 35° movement. 


L005-V has a variable roll- and rocking speed, which is controled by an 

external motor : 5 - 25 rpm; 2,5 -12,5 cycles/min 

L005-SL is a roller with 6 excentrical diagonal moving PVC-rolls, useful for 

bottles up to 1000ml, constant rolling speed: circa 50 rpm The soft rocking 

causes a very care mixing, useful for blood, cell suspensions, chemical based 

fluids like colors, cosmetics, oils etc.. 

Spezifikation: lenght of rolls 26mm, overall dimension: 380 x 270 x 100 (L x W 

x H) 




L005-SL RockŃ Roller, heavy 220V, 50hz 449,00 

Rotary Mixer 



The Rotary Mixer provides serial rotation of test tubes with a diameter range 

from 4 - 27mm. The mixer has a stepless controllable motor with a speed of 5- 

50 rpm. All parts are from aluminium or stainless steal construction. The drums 

and bars are easy to exchange. The digital read out shows speed and time 

from 1-99 hrs, 1-59 min.. Easy handling is provided through "Memory-", 

"Restart-" und "autostop"-functions. 

Weight 3,3kg, dimensions 450 x 170 x 190mm(L x W x H), power 220volt/50Hz 

Cat. # Description Quantity x tubeØ Euro 


L010-16 bar 20 x 16-20mm 98,95 

L010-19 bar 18 x 19-22mm 98,95 

L010-22 bar 18 x 22-27mm 98,95 

L010-4 drum 104 x 4 - 6mm 279,35 

L010-6 drum 104 x 6 - 9mm 279,35 

L010-9 drum 104 x 9-12mm 279,35 

L010-12 drum 48 x 12-16mm 179,40 

L010-912 drum 56 x 9-12mm 198,65 

Disperging- and Homogenizing System for Molekular biology 

This special developed handy mixer for smallest quantities in Bio- and Gentechnology garants the 

best possible dispersion and homogenization. Samples of tissue will be changed in seconds to an 

analysis suited material, resulting in bigger amounts and quality of isolated RNA. The system is 

easy to handle because of the uncomplicated change of rotors. The hand-disperging- 

/homogenizing sytem is useful for volumens up to 100ml. Further systems are available up to 

10.000ml. Technical details: 

speed 5.000 - 35.000min-1 

weight 600g 

power input 145 Watt, power output 73 Watt 

Cat.# Description Speed min -1 Power Watt Working Volume Euro 





L080-20 

DS-5/SK Zahnkranz 

5mm 

Application dip in Working Volume 

smallest volumes 90-20mm 0,1- 10ml 469,00 

L080-100 DS-8/P Zahnkranz 8mm tissue 200-40mm 1 - 50ml 439,00 


L080-20/PF DS-20/PF Rotor 20mm solid/fluid systemes 200-40mm 100-5.000ml 378,00 



L080-20/PG 

SmR 

L080-20/PF 

SmR 

DS-20/PG SmR 

cuttrotor 20mm 

DS-20/PF SmR cutrotor 

20mm 




L080-RW- 

30/PG 

Power-Mix 

RW-30/PG Mixrotor 

30mm 

mix/cut 200-40mm 1.000-20.000ml 379,00 

"Power Mix" is an universal vortex mixer for test tubes from 7 to 35mmØ. The instrument can be 

used in "Press-to-mix" action or continously. The stepless speed can be controlled up to 2.500. 

By using further additional accessories 96 well plates can be mixed as well as 20 x 1,5ml 

centrifuge tubes at same time. 




L002-MTP micro-titre-plate-holder f. 1 x96 plate 37,85 

L002-MRT mini-reaction-tube holder f. 20 tubes 49,10 

L002-1TTH one position test tube holder 33,25 

L002-2TTH multi position tube holder f. 7 tubes 85,90 

L002-UKP universal contact plate 16,35 

MINI-Vortex 

A space saving instrument to mix small samples in tubes from 1,5 to 50ml. The MINI- 

Vortex can be used continuesly or in the press-to-mix mode. Speed can be setted 

variable from 300 to 2.500 rpm 

Size: 140 x 85 x 70mm 

Weight: 0,8kg 

external Powersupply: 12 Volt/300mA 



Tube Vortexer 



A very economical priced equipment for mixing 1,5/2,0ml microcentrifugentubes,e.g for 

vortexing of bacteria/yeast cultures and for DNA/RNA purification. 

Spezifikation: capacity 16 x 1,5/2,0ml 

speed constant 2.400 r.p.m, amplitude 4mm 

dimension / weight 120 x 140 x 150mm / 4kg 

Cat. # Desciption Power Euro 



electronical speed controlle, speed range from 50 bis 1.250 rpm, double housing of 

aluminium and thermovacuum formed plastic, coated with electrostaticly applied 

powder, which is corrosion resistant; stirring capacity 5 or 20 liter 

Specification: weight 2,2kg, dimension 172 x 286 x 80 mm(L x W x H) 

stainless steel 155mm Ø 

Magnetic stirrer with Aluminium-hotplate for stirring and heating at same time or 

indpendant. 


speed range 50 - 1.250 rpm Mixing/heating on 145mm plate of volumina up to 5/ 10/ 20 

liters . 

The aluminium housing is equipped with M10 threated support rod connection. Working 

temperature is 5-50°C, allowed humidity is 90% 

Specification: weight 2,8kg, dimension 172 x 286 x 125 mm (L x W x H) 


motor rating 

in/out 

Euro 

L012-5 Magnetic Stirrer 5 Liter 22 / 2,2 watt 159,00 

L012-20 Magnetic Stirrer 20 Liter 13 / 5 watt 259,00 

L014-5 Hotplate/Magnetic Stirrer 5 L 22 / 2,2 watt 239,00 

L014-10 Hotplate/Magnetic Stirrer105 L 22 / 2,2 watt 310,00 

L014-20 Hotplate/Magnetic Stirrer 20 L 22 / 5 watt 359,00 


A small motor driven magnetic stirrer in a stainless steel housing with enough mixing 

power for many applications in the lab. Stepless speed regulation from 150 - 3000 rpm 


dimension plate: 110 x110mm 


weight: 1 kg 

external powersupply: 12Volt, 300mA 

Cat. # description Electrical requirement Euro 





All possibilities in one microprocessor controlled productline, all positiones 

individual to control: 





Cat.# Configuration Hotplate dimension weight kg Euro 

L060 4-Position,bench form no 545 x 245 x 110 7,2 599,00 

L061 6-Position,bench form no 830 x 245 x 110 10 699,00 

L062 4-Position, square no 335 x 400 x 110 7 599,00 

L063 6-Position, quare no 500 x 400 x 110 9,8 699,00 

L064 4-Position,bench form yes 545 x 245 x 155 9,2 899,00 

L065 6-Position,bench form yes 830 x 245 x 155 13,2 1.179,00 

L066 4-Position, square yes 335 x 400 x 155 9,4 899,00 

L067 6-Position, square yes 500 x 400 x 155 13 1,179,00 


This microplate washer is the most user friendly manual washer on the market. The 

user can choose to process the plate either in ist storage position- on top of the pump 

unit or, down on the labtop surface. The unit provides a quiet and reliable operation in a 

compact format, accurate dispensing and low residual volumes, adjustable dispense 

pressure and aspirate force. Further features are 







A complete unit includes wash head, wash and waste bottles, pump unit, plate carrier, 

power supply and all tubing. Single modules are available for customers, who have 

already a vacuum pump. 












L074 


Vaccum /pressure unit with single probe or 8-way 

manifold (specify when ordering) 

This microplate washer/filler A1000 is a unique processor for the fully automated 

washing and filling of both, 96 and 384 well microplates, including deep well and filter 

bottom formats. It is designed to achieve a fast and reliable microplate processing with 

high precision and repeatability, whilst allowing the user a multitude of individual 

adjustment possibilities. 











technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, residual volume 

3microliter per well typical action or 1 microliter per well with sweep, precision CV = +/- 

3% 300µl, dispensing volume 25 - 1500 microliter in 25 microliter increments, speed 2,5 

min, wheight 9,2kg, dimension 350x650x350mm wxdxh. 

1.280,00 
















P.O. Box 1329 


Germany 


Mikrotestplatten-Thermo- Shaker 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Dieser einzigartige Mikrotestplatten Thermo-Shaker kombiniert Schütteln und Heizen. 

Das Gerät kann 2/4 Mikrotestplatten entweder Schütteln oder Heizen oder 

gleichzeitig Schüttlen/Heizen. Die Schüttelfrequenz beträgt 250 - 1.200 rpm bei einer 

2 mm Amplitude. Die Hitze wird sowohl von der Plattform wie auch vom heizbaren 

Deckel zu den Proben transferiert. Das beidseitige Heizen garantiert eine sehr gute 

Temperaturstabilität bei einer niedrigen Evaporationsrate. Der Temperaturbereich 

beträgt 25 °C oder Raumtemperatur bis zu 60°C. 

Alle elektronischen Functionen inklusive des 96 Stunden Timers sind mikroprozessor 

gesteuert. 

Spezifikationen:L079: Gewicht 6,2 kg, Abmessungen 270 x 260 x 125 mm (B x T x H) 

L079-4: Gewicht 9,0kg, Abmessungen 380 x 390 x 140 mm (B x T x H) 

externes Netzteil 12 volt, 4.16A 


L079 Mikrotestplatten-Thermo- Shaker 2 MTP`s 985,00 

L079-4 Mikrotestplatten-Thermo- Shaker 4 MTP`s 1.295,00 

Mikrotiterplatten-/ Multi-Well-Platten-/ Mikrozentrifugenröhrchen-Schüttler 

rotierende Schüttelbewegung mit 50 - 1.250 rpm / 4mm Amplitude 

Mikroprozessor gesteuert, konstante Geschwindigkeit auch bei 

hoher Frequenz, 

digitale Geschwindigkeitsanzeige gewählt/aktuell 

Gewicht 4,7kg, Maße 240 x 250 x 175mm (L x B x H) 

alle Geräte inklusive Halterungen, Trays optional. 




L029 Schüttelgerät für 4 Multi-Well Platten 539,00 

L030 Schüttelgerät für 4 x 20 1,5ml Tubes 539,00 




file:///F|/Kisker/Kisker/deutsch/rotator_d.htm (1 von 12) [08.12.2005 22:32:17]



Neu in unserm Sortiment ist dieser kleine handliche Mikroplattenschüttler. Minimaler 

Platzbedarf, Abmessung 93x133x87mm (BxTxH). Offene Konstruktion zur Integration 

in Robotersysteme. Variable Geschwindigkeit von 950-1300rpm., Orbit 1mm. Orbis 

plus mit Zeitschaltuhr 1-180 Minuten. 

Power supply 15Volt 100mA DC, 110-230 Volt, 50/60 Hz 


L070 Mikrotestplattenschüttler 259,0 

L071 Mikrotestplattenschüttler mit Zeitschaltuhr 329,0 

L070-A Aufsatz für 40x1,5/2,0ml Tubes 45,00 

L070-D Deckel aus klarem Styrol 33,00 

"Personal Microplate Incubator" 

Der Mikrotestplatten-Inkubator ist ein zuverlässiges, Service freies und langlebiges 

Gerät zur schonenden Inkubation von Mikrotestplatten. Es zeichnet sich aus durch 

minimalen Platzbedarf, Abmessungen 120x180x100mm (BxTxH). Der Heizbereich 

erstreckt sich von 5°C über Raumtemperatur bis 45°C. Das digitale Display zeigt 

Temeratur oder bereits abgelaufene Inkubationszeit. Alle Arten von Mikroplatten 

können inkubiert werden, nicht abgedeckte Platten weisen minimale Evaporation auf. 

Niedige Spannung gewährleistet höhere Sicherheit. 

Technische Werte: Netzteil 12Volt 2A DC, 100-230 Volt, 50/60 Hz, Gewicht 920g. 


L078 Mikrotestplatten-Inkubator 426,00 

Mini 3D Taumelschüttler 

Kleiner Taumelschüttler - rostfreies Stahlgehäuse, stufenlos 

einstellbare Drehzahl von 15 - 60 rpm, Neigungswinkel 7°, optional 

Aufsatz für 26 Tubes 

Abmessungen: 160 x 150 x 160 mm Tragfähigkeit: 500 g, 

Arbeitsplatte: 200 x 200 mm 

Gewicht: 1,2 kg Anschluß: 12 Volt, 300 mA 


L040 3D-Schüttler 220Volt/50Hz 278,6 


Multi Dancer, der Alleskönner 



Reziprok-Kreisen 0-360° 

3D-Schütteln 0-360°, 30°-Schritte, 0-250 Sekunden-Timer 

Vortexen 0 - 6°, 1°-Schritte, 0 - 5 Sekunden-Timer 

Geschwindigkeit 5 - 30 rpm, Plattformwinkel 7°, 

progarmmierbare Zyklen mit bis zu 125 Wiederholungen 

max. Ladekapazität 1 kg 



MINI-Rocker 

Kleiner Wipptisch mit variabler Schüttelfrequenz von 7,5 - 30 rpm /min, mit 

einem Neigungswinkel von 7°. Der MINI-Rocker ist ausgestattet mit einem 0 - 

24 Stunden Timer und LED Anzeige. 

Abmessungen: 200 x 250 x 130 mm, Gewicht: 2,1 kg, 

Plattform 200 x 200 mm,Tragfähigkeit: 0,5kg 

Anschluß: Externes Netzteil 12 V, 500 mA 


L024 MINI-Rocker 12Volt 500mA 295,00 

Maxi Rocker 

Ein Schüttler in kompaktem Design mit starkem Motor; Plattform mit Antirutschmatte, 

Abmessung 300 x 300mm, Neigungswinkel 5,5° ( auf Wunsch lieferbar mit 4,5 oder 

7,5° ) 

Variable Geschwindigkeit von 12 - 50 r.p.m. 

Tragfähigkeit 5kg 

Arbeitstemperatur von -5°C bis 60°C, maximale Luftfeuchtigkeit 95% Gewicht 7 kg, 

Dimensionen: 335 x335 x 190mm 



Test Tube Rotator, variable Geschwindigkeit 

Ein Test Tube Rotator zum Diffundieren, Dialysieren, Extrahieren oder Mischen. 

Elektronisch gesteuerter Motor mit Geschwindigkeit von 5 - 50 r.p.m., Steuerung über 

Zeitschaltuhr 0-99 Stunden, 1-59 Minuten. Der Test Tube Rotator ist einfach zu bedienen 

durch "Memory-" und "Restart"-Funktionen und austauschbare Scheiben für Tubes von 4 - 

40mm. Der Neigungswinkel kann eingestellt werden von 27° - 90°; Adapter den 

gleichzeitigen Betrieb von 2 oder 3 Scheiben. 

Spezifikation: Abmessungen: 200 x 200 x 250 mm (LxBxH); Gewicht.: 3,5 kg; Motor 

220Volt, 50Hz 

Kat. # Beschreibung Anzahl x Tube Ø Euro 


L009-4 Scheibe (0,5ml) 40 x 4 - 9mm 79,00 



L009-6 Scheibe 30 x 6 - 9mm 79,00 

L009-9 Scheibe (1,5/2,0ml) 20 x 9-12mm 63,80 


L009-16 Scheibe 20 x 16-19mm 63,80 

L009-19 Scheibe 18 x 19-22mm 63,80 

L009-22 Scheibe 15 x 22-25mm 63,80 


L009-28 Scheibe 10 x 28-32mm 63,80 

L009-32 Scheibe 10 x 32-40mm 63,80 

L009-A Adapter 1 44,00 


Zum Diffundieren, Dialysieren, Extrahieren oder Mischen etc. 

Ein synchroner Motor mit langsamer Rotationsgeschwindigkeit von 10 rpm, welche einen 

Tubewechsel während des Betriebes erlaubt. 

Die Rotationsscheibe kann in einem Winkel von 90 bis 27° eingestellt werden. Die Scheiben 

haben einen Durchmesser von 

200 mm, ausgestattet mit chemisch resistenten Klammern. 

Das Gerät wiegt 4 kg, Abmessungen 200 x 200 x 205 mm (L x B x H) 

Zum Bestellen der Scheiben bitte Bestellinfos des Rotators L009 verwenden! 



Mini – Rotator, Standard 

Platzsparender Überkopfmischer für je 24 x 1,5/2,0 ml Mikrozentrifugenröhrchen 

oder 24 x 15 ml Röhrchen mit maximal 14mm Durchmesser. 

Betrieb im Kühlraum oder Heizraum im Temperaturbereich von 4 bis 45°C möglich. 

Spezifikation: Geschwindigkeit 5 – 30 .rpm, Digitaler Timer für 24 Std, LED 

Anzeige, Gewicht: 2,0 kg, Maße: 225 x 145 x 140 mm, externes Netzteil. 



L053-8 Plattform für 8 Tubes bis 30mm Ø 35,00 




Platzsparender Überkopfmischer für 22 x 1,5/2,0 ml Mikrozentrifugenröhrchen oder 

22 x 15 ml Tubes bis maximal 14 mm Ø. 

Spezifikation Multi-Rotator: Funktionen: Überkopfmischen, Reziprokes 

Überkopfmischen, Überkopfschütteln (Vortex) 

Geschwindigkeit; 5 – 30 rpm 

Timer für vertkales/reziprokes Schütteln:0-250 Sekunden 

Winkel beim Reziprokmischen 15 - 90° (15-Schritte wählbar) 

Winkel beim Vortexen 0 - 5° (1-Schritte wählbar) 

kontinuierlicher Betrieb mittels 24 Std. Timer 

Spezifikationen: Gewicht: 1,6 kg, Maße 310 x 110 x 175 mm, Anschluss: 220V, 50Hz 


L054-N Multi Rotator 12V,500mA 459,00 

L054-4/12 Plattform für 4x50ml/12x1,5-2,0-15ml 35,00 

Orbitalschüttler 

Ein kompakter Orbitalschüttler 

für viele Standardanwendungen 

biologisch/biochemischen 

Laboren mit bedienerfreundlich 

auswechselbaren Plattformen 

für unterschiedliche 

Anwendungen ( Flaschen oder 

Schalen). 

Schüttelfrequenz 50 - 250 rpm 

digitales Display und timer 1- 

999 Minuten. 

Amplitude 20 mm, maximale 

Ladekapazität 2,5 kg 

Arbeitstemperaturbereich: 4 - 

45°C, kein Feuchtraum 

Gewicht: 3,9 kg, Abmessung 

220 x 190 x 70 mm 

Kat. 

# 

Beschreibung Plattformmaße Euro 

L044 Orbitalschüttler 12Volt,800mA 499,00 

L044- 

F 

L044- 

F/6 

L044- 

F/12 

L044- 

P 

Universalflaschenaufsatz 270 x 195 79,00 

Flaschenaufsatz für 6 x 250 - 300ml 250 x 190 79,00 

Flaschenaufsatz für 12 x 100 - 150ml 250 x 190 79,00 

Flaschenaufsatz für Petrischalen etc. 220 x 220 30,20 

Orbitalschüttler - MULTI-POWER 



Der Orbitalschüttler MULTI-POWER eignet sich für intensives Mischen von 

biologischen Suspensionen oder chemischen Komponenten in größeren 

Volumina mit einer Gesamttragkraft von 15 kg. U.a. ist das Gerät einsetzbar 

im Mehrtagebetrieb für Extraktionen, Zellkultivierungen, Rotieren 

geschlossener Flaschen zur Dialyse. 

Bedienerfreundliche Prozessor kontrolliertes Programmieren, beleuchtetes 

LCD-Display 

3-fach Modus: Kreisen, Reziprok-Kreisen, Vibration 

Spezifikationen: Schüttelfrequenz 5 - 250 rpm 

digitales Display und Timer 1min-96 Stunden. 

Amplitude 20mm, maximale Ladekapazität 15,0 kg 

grosse Arbeitsplattform mit Spannwalzen 460 x 400 mm 

Arbeitstemperaturbereich: 4 - 45°C, kein Feuchtraum 

Gewicht: 19,3kg, Abmessung 485 x 520 x 140 mm 



L048-P Plattform mit Antirutschmatte 430 x 380 mm 96,00 


Der RockŃ Roller bewirkt gleichzeitiges Drehen und Kippen der 

Probenröhrchen. 

14 Rollen aus rostfreiem Stahl garantieren eine gleichmäßiges Mischen der 

Proben. Die 14 Rollen mit den Abmessungen 208 x 10mm(L x Ø) drehen mit 

10 r.p.m., die Kipp-Frequenz beträgt 5 Cyclen /Minute bei 35° 

Spezifikation L005: Gewicht: 3 kg, Abmessung 330 x 300 x 190mm (L x B x 

H) 

L005-V hat eine variable Dreh- und Kippgeschwindigkeit, die durch einen 

externen Motor gesteuert wird: 5 - 25 rpm.; 2,5 -12,5 Zyklen/Minute 

L005-SL ist ein Schwerlastroller mit 6 exzentrisch diagonal taumelnden PVC- 

Rollen, geeignet für Flaschen bis 1000 ml, konstante Rollengeschwindigkeit: 

circa 50 rpm. Die geringe Kippbewegung bewirkt eine besonders schonende 

Durchmischung, geeignet nicht nur für Vollblut oder Zellsuspensionen, 

sondern auch chemisch basierte Stoffe wie Farben, Kosmetika, Öle etc.. 

Spezifikation: Rollenlänge 26 mm, Gerät: 380 x 270 x 100 mm (L x B x H) 




L005-SL RockŃ Roller, Schwerlast 220V, 50hz 449,00 

Rotary Mixer 



Der Rotary Mixer ist ein Mischer für Serien-Rotation von Tubes und 

Röhrchen mit einem Ø von 4 - 27 mm. Der Rotary Mixer hat einen stufenlos 

kontrollierbaren Motor mit einer Geschwindigkeit von 5-50 rpm.. Alle Teile 

sind aus Aluminium oder rostfreiem Stahl. Die Trommeln und Stäbe sind 

leicht auszuwechseln. Die digitale Anzeige Geschwindigkeit und Zeit von 1- 

99 Stunden, 1-59 Minuten. Für einfache Bedienung sorgen "Memory-", 

"Restart-" und "autostop"-Funktionen. 

Spezifikationen: Gewicht 3,3 kg, Abmessungen 450 x 170 x 190 mm(L x B x 

H), Anschluss 220volt/50Hz 

Cat. # Beschreibung Anzahl x TubeØ Euro 


L010-16 Stab 20 x 16-20mm 98,95 

L010-19 Stab 18 x 19-22mm 98,95 

L010-22 Stab 18 x 22-27mm 98,95 

L010-4 Trommel 104 x 4 - 6mm 279,35 

L010-6 Trommel 104 x 6 - 9mm 279,35 

L010-9 Trommel 104 x 9-12mm 279,35 

L010-12 Trommel 48 x 12-16mm 179,40 

L010-912 Trommel 56 x 9-12mm 198,65 

Dispergier- und Homogenisiersystem für die Molekularbiologie 

Dieses speziell für Kleinstmengen in der Bio- und Gentechnologie entwickelte Handgerät 

gewährleistet die bestmögliche Zerkleinerung einzelner Bestandteile. Gewebeproben werden 

binnen Sekunden zu einer analysentauglichen Masse zerkleinert. Größere Ausbeuten an 

isolierter RNA von bis zu 100% sowie eine bessere Qualität durch schnelle, schonende 

Zerkleinerung sind ungeheuer wichtig, wenn z.B.nur wenig Ausgangsmaterial zur Verfügung 

stehen. Der unkomplizierten Werkzeugwechsel gewährleistet einfache Handhabung. Das Hand- 

Dispergier-/Homogenisiergerät ist geeignet für Volumina bis 100ml. Weitere Systeme zum 

Zerkleinern anderer Volumenbereiche bis 10.000ml sind erhältlich. Technische Details: 

Drehzahl 5.000 - 35.000min-1 

Gewicht 600g 

Aufnahmeleistung 145 Watt, Abgabeleistung 73 Watt 

Kat.# Beschreibung Drehzahl min -1 Watt Arbeitsvolumen Euro 





L080-20 

DS-5/SK Zahnkranz 

5mm 

file:///F|/Kisker/Kisker/deutsch/rotator_d.htm (7 von 12) [08.12.2005 22:32:18] 

Applikationsbereich Eintauchtiefe Arbeitsvolumen 

Kleinstmengen 90-20mm 0,1- 10ml 469,00


L080- 

100 

L080- 

20/PG 

L080- 

20/PF 

L080- 

20/PG 

SmR 

L080- 

20/PF 

SmR 

L080- 

30/PG 

L080- 

RW- 

30/PG 

Power-Mix 

DS-8/P Zahnkranz 

8mm 

DS-20/PG Rotor 

20mm 

DS-20/PF Rotor 

20mm 

DS-20/PG SmR 


DS-20/PF SmR 


DS-30/PG Rotor 

30mm 

RW-30/PG 

Mischrotor 30mm 

Gewebe 200-40mm 1 - 50ml 439,00 

Fest-/Flüssig Systeme 200-40mm 100-5.000ml 349,00 





Mischen/Zerkleinern 200-40mm 1.000-20.000ml 379,00 

"Power Mix" ist ein universell einsetzbarer Vortexmixer für Röhrchen von 7 bis zu 35mmØ. 

Das Gerät kann im "Press-to-mix" Mode oder kontinuierlich eingesetzt werden. Die 

Drehzahlregelung erfolgt stufenlos bis zu 2.500 rpm bei einer Amplitude von 3 mm. Durch 

weiteres Zubehör kann das Gerät sehr vielseitig eingesetzt werden, wie z.B. mit 96 Well 

Platten oder 20 x 1,5 ml Zentrifugenröhrchen gleichzeitig. 

Spezifikationen: Gewicht 3,2 kg, Abmessungen: 135x120x135 mm (L x B x H) 



L002-MTP Mikrotestplattenhalter f. 1 x96 Platte 37,85 

L002-MRT Reaktionsgefäßhalter f. 20 tubes 49,10 

L002-1TTH Einpositionshalter f. Gefäße 20x200mm 33,25 

L002-2TTH Mehrpositionshalter f. 7 Tubes 85,90 

L002-UKP Universalkontaktplatte 16,35 

MINI-Vortex 



Ein platzsparender Vortexer für kleine Probenmengen in Tubes von 1,5 bis 50 ml. 

Der MINI-Vortex kann kontinuirlich oder im press-to-mix Mode betrieben werden. 

Die Geschwindigkeit kann variabel von 300 bis 2.500 rpm. eingestellt werden 

Abmessungen: 140 x 85 x 70 mm 

Gewicht: 0,8 kg 

Anschluss: 12 Volt/300mA 



Tube Vortexer 

Ein kleines preisgünstiges Gerät zum Mischen von 1,5/2,0 ml Mikrozentrifugenröhrchen 

zum Aufschütteln von Bakterien/Hefekulturen sowie zur DNA/RNA Aufreinigung. 

Spezifikation: Kapazität 16 x 1,5/2,0 ml 

Drehzahl konstant 2.400 rpm Amplitude 4mm 

Abmessung / Gewicht 120 x 140 x 150 mm / 4 kg 



Magnetrührer und Magnetrührer mit Heizplatte 

elektronischer Geschwindigkeitskontrolle, Geschwindigkeit von 50 bis 1.250 rpm., 

Doppelgehäuse, M10-Gewinde für Stativstab, Rührkapazität 5 oder 20 Liter 

Spezifikation: Gewicht 2,2 kg, Abmessung 172 x 286 x 80 mm(L x B x H) 

Edelstahstellfläche 155 mm Ø Magnetrührer mit Aluminium-Heizplatte für 

gleichzeitiges und unabhängiges Heizen oder Mischen. Heizleistung beträgt 50 - 

325°C bei 600 Watt, Drehzahl beträgt 50 - 1.250 rpm. Auf der 145 mm Stellfläche 

werden Volumina bis 5/ 10/ 20 Liter bewegt bzw erhitzt. Das Aluminiumgehäuse ist 

mit M10 Gewinde zum Stativeinsatz ausgerüstet. Spezifikation: Gewicht 2,8 kg, 

Abmessung 172 x 286 x 125 mm(L x B x H) Aluminium beschichtete 

Edelstahstellfläche 145 mm 

Kat.Nr. Bezeichnung/Rührleistung Motorleistung ein/aus Euro 

L012-5 Magnetrührer 5Liter 22 / 2,2 Watt 159,00 

L012-20 Magnetrührer 20 Liter 13 / 5 Watt 259,00 



L014-20 Heiz/Magnetrührer 20 L 22 / 5 Watt 359,00 

Mini-Magnetrührer 



Ein kleiner Motor betriebener Magnetrührer im Edelstahlgehäuse mit ausreichender 

Mischkraft für viele Laboranwendungen. Die Drehzahleinstellung erfolgt stufenlos von 

150 - 3000 r.p.m. 

Abmessung: 120 x 55 x 60mm 

Abmessung der Stellplatte: 110 x110 mm 

Mischkapazität: 2 Liter 

Gewicht: 1 kg 

Anschluss: 12Volt, 300mA 



Multi Position Magnetrührer 

Alle Möglichkeiten in einer Mikroprozessor gesteuerten Produktlinie, alle 

Positionen individuell regelbar: mit oder ohne Heizung 4 oder 6 Positionen 

quadratisch oder Tischform Heizplatten aus 120 mm Edelstahl 

Geschwindikkeit 50 – 1200 rpm. Energieregelung 10 – 300 Watt/ Pos. 

Kat.# Konfiguration Heizplatte Abmessungen mm Gewicht kg Euro 

L060 4-Position,Tischform ohne 545 x 245 x 110 7,2 599,00 

L061 6-Position,Tischform ohne 830 x 245 x 110 10 699,00 

L062 4-Position, quadratisch ohne 335 x 400 x 110 7 599,00 

L063 6-Position, quadratisch ohne 500 x 400 x 110 9,8 699,00 

L064 4-Position,Tischform mit 545 x 245 x 155 9,2 899,00 

L065 6-Position,Tischform mit 830 x 245 x 155 13,2 1.179,00 

L066 4-Position, quadratisch mit 335 x 400 x 155 9,4 899,00 

L067 6-Position, quadratisch mit 500 x 400 x 155 13 1,179,00 


This microplate washer is the most user friendly manual washer on the market. The 

user can choose to process the plate either in ist storage position- on top of the pump 

unit or, down on the labtop surface. The unit provides a quiet and reliable operation in 

a compact format, accurate dispensing and low residual volumes, adjustable 

dispense pressure and aspirate force. Further features are 







A complete unit includes wash head, wash and waste bottles, pump unit, plate 



carrier, power supply and all tubing. Single modules are available for customers, who 

have already a vacuum pump. 










L074 


Vaccum /pressure unit with single probe or 8-way 

manifold (specify when ordering) 

This microplate washer/filler A1000 is a unique processor for the fully automated 

washing and filling of both, 96 and 384 well microplates, including deep well and filter 

bottom formats. It is designed to achieve a fast and reliable microplate processing 

with high precision and repeatability, whilst allowing the user a multitude of individual 

adjustment possibilities. 







separate dispense and aspirate channels reduce the possibility of cross 

contamination 




technical data: dispense reservoir 3 x 2 litres, waste reservoir 2 litres, residual 

volume 3microliter per well typical action or 1 microliter per well with sweep, precision 

CV = +/- 3% 300µl, dispensing volume 25 - 1500 microliter in 25 microliter 

increments, speed 2,5 min, wheight 9,2kg, dimension 350x650x350mm wxdxh. 

1.280,00 


















P.O. Box 1329 


Germany 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Mikro-Zentrifuge, jetzt auch mit Rotor für 2 PCR-Tube Streifen á 8 PCR Tubes 

- 6.200 r.p.m (2000xg) für 6 x 1,5ml Tubes, 

sowie 2 Streifen á 8 x 0,2ml PCR Tubes im 

separaten Rotor (optional) 

- Adapter für 0,5 ml und 0,2 ml Tubes 

- verbesserte Deckelbefestigung minimiert 

Risiko einer Beschädigung der 

Deckelhalterung 

- erhöhte Sicherheit, mit separatem 

An/Ausschalter, Autostopp bei Deckelöffnung 

- sehr ruhiger Motor, getestet über 2.500 Std. 

- Abmessung: circa 13 cm Durchmesser, Gewicht: 830g 


MZ001-N Mikro-Zentrifuge 220Volt,50Hz 219,90 

MZ001-A-0.5 Adapter für 0,5ml 6 Adapter 6,50 

MZ001-A- 

0.4/2 

MZ001-A- 

8x0,2 

Adapter für 0,4/0,2ml 6 Adapter 6,50 

Rotor für 8er-Streifen 0,2ml PCR-Tubes 29,90 

Mikro-Zentrifuge, Vortex Mixer, "zwei in einem" 

Im neuen Design präsentiert sich diese platzsparende und preiswerte 

Laborhilfe als Kombination aus Zentrifuge und Vortexer. Lange Wege 

zwischen Zentrifugationsschritt und Probenmischung fallen weg. Die 

Reagenzgefässe können mittels des durch die Öffnung des 

Zentrifugendeckels ragenden Vortexaufsatzes aufgemischt werden. Die 

konstante Zentrifugengeschwindigkeit beträgt 2.400 r.p.m. bei 700xg, die 

Vortexgeschwindigkeit ist ebenfalls 2.400 r.p.m. Das Gewicht des Gerätes 

beträgt 2 kg, die Maße sind 130 x 170 x 100mm. Das Gerät wird mit zwei 

Rotoreinsätzen für 12 x 0,5ml und 0,2ml sowie 12 x 1,5ml Tubes geliefert. 


MZ002 Zentrifuge/Vortexmix. 220Volt, 50Hz 289,00 


file:///F|/Kisker/Kisker/deutsch/mini_d.htm (1 von 9) [08.12.2005 22:32:19]


Multi-Fuge, 3500 r.p.m.: Zentrifugieren, Vortexen, beides kombinieren 

Zentrifugieren:1.000 - 3.500 rpm, 100- Schritte einstellbar 

Vortexen:sanft - mittel - stark 

Kombinieren 

1 - 99 Minuten Zeitschaltung, 999 Wiederholungen 

Rotorscheiben inklusive für 12x1,5ml und 12 x 0,5/ 12x 0,2ml 




SM-9000 Kleinzentrifuge 12 x 1,5/2,0ml 

klein - handlich - schnell, 

innerhalb von 2 Sekunden auf 9000 r.p.m. 

Festgeschwindigkeit, 5.000 x g, 

Laufunterbrechung bei Deckelöffnung, 

Rotor inklusive für 12 x 1,5ml/2,0ml Tubes, 

Geräusch armer Lauf im Metallgehäuse, 

Abmessung: 200 x 170 x 150mm (LxBxH) 


MZ008 220V, 50-60Hz 449,00 

EBA 20 Kleinzentrifuge für 8 x 15ml Tubes 

Die praktische EBA 20 ist das ideale Gerät für geringe Probenaufkommen. 

Serienmäßige Ausstattung: 

8 - fach Winkelrotor und E-Steuerung. 

Rotoreignung für: 

8 x 15ml (17 x 100mm ) 4 x 15ml, Falcons mit Schraubverschluss (17 x 120mm ) 

8 x 9 - 10ml Blutabnahmegefäße 16,5 x 92mm ) 

4 x 8ml Blutabnahmegefäße 16 x 125mm ) 

8 x 8,5 - 100ml Blutabnahmegefäße (16x100mm) 

Ausstattung: Deckelverriegelung u. - zuhaltung; Anzeige der Istgeschwindigkeit 

Geschwindigkeit: 6.000 r.p.m, einstellbar in 100er Schritten, 3.421 x g 

Abmessung/Gewicht: 215 x 231 x 292 (HxBxT), 4kg 


MZ007 208-240V, 50/60Hz 679,00 



Labor-Zentrifuge für 50 ml Falcons und Mikrotestplatten 

Diese neuartige Tischzentrifuge eignet sich für die 

Sedimentation von Zellen, Bakterien, Hefen und 

Blutkomponenten. Es stehen Rotoren sowohl für Röhrchen 

als auch für Mikrotestplatten zur Verfügung 


Geschwindigkeitsintervalle 1000 - 3000 r.p.m. 

Display LCD 




MZ014 Labor-Zentrifuge, 220 Volt, 50 Hz 1.190,00 

MZ014-MTP Rotor für 2 Mikrotestplatten 145,00 

MZ014-17100 

Ausschwingrotor für 12 x 10 

ml/17x100 mm 

165,00 

"Smart Runner", Mikroliterzentrifuge für die Molekularbiologie, leistungsstark 

und preiswert, 14.000 r.p.m.,15.558 x g 

Diese Mikroliterzentrifuge wird komplett mit einem Winkelrotor inklusive 

Deckel für 12 x 1,5/2,0ml Tubes geliefert. Sie läuft in Sekundenschnelle zur 

Höchstform auf und passt in kleinste Lücke auf dem Labortisch. 

Die Vorteile der Zentrifuge auf einen Blick: 

Deckelverrieglung und Deckelzuhaltung 


Notentrieglung 



Übersichtliche Folientastatur 

Eingabe der Parameter mittels Folientastatur 

Geschwindigkeitsintervalle 100 r.p.m., Dauerlauf, Kurzlauf 

Anzeige des IST-Zustandes während des Laufes 




MZ010 Smart Runner inkl.Rotor 869,00 



"Cool Sprinter" Mikroliterzentrifuge ungekühlt oder gekühlt -10°C - 40°C, 

14.000 r.p.m., 18.626 x g 



Der Cool Sprinter gehört zu den schnellsten seiner Klasse. Die max 

Drehzahl liegt bei 14.000r.p.m, die RCF bei 18.626. Mit Fast Cool 

kühlt sie sehr fix: in 10 bis 15 Minuten auf 4°C. Dank dieser 

zuverlässigen Kühlung lassen sich auch thermolabile Proben 

schonend zentrifugieren. Der laufruhige und leistungsstarke Motor 

mit wartungsfreiem Frequenzantrieb garantiert beste 

Trennergebnisse. Für sicheres Arbeiten mit infektiösem Material 

steht aerosoldichtes und autoklavierbares Zubehör zur Verfügung. 

Bedienerkomfort: Anzeige des IST-Zustandes während des Laufes 

Gut ablesbares digitales Display 

Motorische Deckelverriegelung 

Impulstaste für kurzes Anzentrifugieren 


RCF-Taste 

Geschwindigkeitsintervalle 100 r.p.m 

Laufzeit max. 99 Minuten 

Kühlung MZ011: Temperatur in 1°C-Schritten von -10 bis 40°C 

Vorkühlfunktion, Stand-by Kühlung 

Automatische Abschaltung bei Deckelöffnung oder Zeitvorwahl 

Sicherheit: Stillstandsanzeige 

Mikroprozessor - Steuerung 

Deckelzuhaltung und Notentrieglung 

Motor- und Keselrüberhitzungsschutz 


Abmessungen (HxBxT) MZ011-UK: 260 x 275 x 347 mm, Gewicht 

11,5kg, MZ011: 260x281x547 Gewicht 28kg 

Die g-force ist abhängig vom verwendeten Rotor/Tube wie 

untenstehend aufgeführt. 

Kat. # Rotorkapazität RCF (g-Force) Euro 

MZ011-UK Sprinter Zentrifuge 997,50 

MZ011 Cool Sprinter Zentrifuge 2.660,00 

MZ011-2425 

Aerosoldichter Deckel f. 

2424/2430 

130,00 

MZ011-2424 Rotor für 24 x 1,5/2,0ml Tubes 18.662 190,00 

MZ011-2430 Rotor für 30 x 0,5ml Tubes 17.749 285,00 

MZ011-2018 

Rotor für 4 x Streifen á 0,2ml 

PCR T. 

12.490 218,00 

MZ011-2040 Deckel f. Rotor 2018 35,00 

MZ011-2024 

Reduzierung für 0,2ml PCR 

Tubes 

1,50 


Mikrozentrifuge, ungekühlt oder gekühlt -20°C bis +40°C, 18.000 r.p.m. 



Diese kleinen Mikroliterzentrifugen finden 

Ihren Einsatz in Molekularbiologie, Virologie 

und Bakteriologie. Gefässe im Volumen 0,2ml 

bis 50ml sowie Haematocritkapillaren können 

eingesetzt werden. Der kollektorlose Antrieb 

gewährt hohe Laufruhe und Drehzahlstabilität. 

3 Laufprogramme können gespeichert 

werden., bei Unwucht erfolgt automatische 

Abschaltung. 

Hohe Sicherheitsstandards: Metallgehäuse, 

Schleuderraum aus rostfreiem Edelstahl, 

automatische Rotorerkennung, 

Unwuchtschalter, hygienedichter Deckel, 

phenolbeständige und autoklavierbare 

Rotoren (einige Rotoren benötigen 

Reduzierungen ) 

Spezifikationen: Temperaturbereich MZ005: - 

20°C bis +40°C; Zeitschalter 1 - 99 Minuten 

Gewicht MZ005: 36kg, Abmessung 178 x 333 

x 620 mm (H x B x T) 

Gewicht MZ005-UK: 16kg, Abmessung 278 x 

333 x 390mm (H x B x T) 

Kat. # Beschreibung Kapazität ml oder mm RCF Euro 



MZ005-1154 Ausschwingrotor 90° 24 x 0,5/1,5/2,0ml 18.516 899,00 



MZ005-2024 

Reduzierung für 0,2ml PCR 

Tubes 



MZ005-1158 Winkelrotor, alu, 2-reihig 48 x 1,5/2,0ml 21.255 oben 405,00 

MZ005-1160 Winkelrotor f. PCR-Streifen 6 x 8x0,2ml 18.845 298,00 

MZ005-1161 Topfrotor mit Deckel 6 fach. 60 x 1,5ml 14.150 519,00 

MZ005-1377 Topfrack 10 x 1,5/2,0ml 14.150 25,00 

MZ005-1378 Topfrack 32 x 0,4ml Beckman 14.150 42,95 

MZ005-1379 Topfrack 21 x 0,8 Bd oder 21 x 0,5ml 14.150 42,95 

MZ005-1020 

Ausschwingrotor nur für 

MZ005 

file:///F|/Kisker/Kisker/deutsch/mini_d.htm (5 von 9) [08.12.2005 22:32:19] 

1,50 

8x10ml/17x70; 5ml/12x75 2.879 204,50


MZ005-1013 

MZ005-1015 


MZ005 


MZ005 

6x15ml/17x100; 10ml/17x70 2.879 158,00 

12x15ml/17x100; 12x5ml/12x75 4.105 355,00 

MZ005-1016 Winkelrotor nur für MZ005 6x50ml/29x107; 3x50ml/Falcon 3.904 340,00 

MZ005-1023 Hämatokrit-Rotor m.Deckel 24 Kapillarröhrchen 21.382 204,50 

Universal 320, ungekühlt oder gekühlt -20°C bis +40°C, 15.000 r.p.m. 

Diese universell einsetzbaren Tischzentrifugen eignen 

sich zum Sedimentieren von Zellen, Bakterien, Hefen, 

DNA/RNA und zur Proteinpräzipitation. Sie zeichnen 

sich aus durch optimales Laufverhalten im nieder- und 

hochtourigen Bereich, vielseitiges und leicht 

auswechselbares Zubehör, hohe RCF (23.907 für 

Mikrotubes, 9.418 für 85 ml Röhrchen). Gefässe im 

Volumen 0,2ml bis 100ml, Mikrotiterplatten, 

Haematocrit Kapillaren sowie ZYTO-Zubehör kann bei 

geringem Platzbedarf eingesetzt werden. Extrem kurze 

Anlauf- und Bremszeiten, Impulstate, RPM oder RCF- 

Eingabe in 10er Schritten sowie 3 Laufprogramme 

machen die Zentrifuge sehr bedienerfreundlich. 


Schleuderraum aus rostfreiem Edelstahl, automatische 

Rotorerkennung, Unwuchtabschaltung, 

Deckelverriegelung u.-zuhaltung, Notentriegelung, 


Spezifikationen: Temperaturbereich MZ012: -20°C bis 

+40°C; Zeitschalter 1-99 Minuten 

Gewicht MZ012: 52 kg, Abmessung 346 x 401 x 695 

mm (H x B x T) 

Gewicht MZ012-UK: 29kg, Abmessung 346 x 395 x 

520 mm (H x B x T) 

Die kompletten Möglichkeiten des vielseitigen 

Zubehörs sind sehr umfangreich, deswegen führen wir 

hier nur einige gängige Rotoren auf. Bitte fragen Sie 

uns nach der Lösung Ihres Zentrifugationsproblems. 

Kat. # Beschreibung Kapazität in ml RCF Euro 

MZ012 

MZ012- 

UK 

MZ012- 

1689 

MZ012- 

1612 

Kühlzentrifuge bis - 

40°C 

Zentrifuge ohne 

Kühlung 

Winkelrotor 45° 

aerosoldicht 

Winkelrotor mit 

Deckel 


100ml max. 3.685,00 

100ml max. 1.935,00 

30 x 0,5/1,5/2,0ml 21.255 439,00 

12 x 0,5/1,5/2,0ml 16.602 195,00


MZ012- 

1613 

MZ012- 

1420 

MZ012- 

1622 

MZ012- 

1645 

MZ012- 

4345 

MZ012- 

1617 

MZ012- 

1619 

MZ012- 

1462 

MZ012- 

1624 

MZ012- 

1381 

MZ012- 

1650 

MZ012- 

1626 

Winkelrotor 12-fach 

Winkelrotor 

aerosoldicht 

Ausschwingrotor / 

Gehänge 

12x15ml/17x100; 

6x15ml/Falcon 

4.146 275,00 

24 x 0,5/1,5/2,0ml 21.382 259,00 

2-fach MTP 2.093 899,00 

Ausschwingrotor 4-fach MTP 1.896. 399,00 

Nutgehänge f. MZ012- 

1645 

Ausschwingr. 

m.Gehänge 

Ausschwingr. 

m.Gehänge 

Reduzierung f. 

MZ012-1617/1619 

Ausschwingr. o. 

Gehänge 

Leichtmetallbecher 

f.MZ012-1624 

Hämatokrit-Rotor 

m.Deckel 

Rotor mit ZYTO 

Becher 

1 Edelstahlgehänge 122,00 

8 x 50ml Falcon, 45° 3.857 379,00 

6 x 50ml Falcon, 90° 2.701 359,00 

für Einsatz von 15ml 

Falcons 

12,00 

4-fach 2.665 297,00 

1 x100ml 84,50 

24 Kapillarröhrchen 269,00 

6 fach 2.093 1.085,00 

Rotina 35, ungekühlt oder gekühlt -20°C bis +40°C, 15.000 r.p.m., RCF bis 

24.400 

Die Rotina 35 Tischzentrifugen überzeugen durch 

modernste Technik, hohe Kapazität, besonderen 

Bedienerkomfort und große Laufruhe. Bevorzugte 

Einsatzgebiete sind die Diagnostik, Molekular- und 

Mikrobiologie. Gefässe im Volumen 0,2ml bis 250ml 

bei Kapazitäten von 10 x 50ml Falcons, 48 x 15ml 

und 4 x 250ml sorgen für hohen 

Probenmengendurchsatz. Extrem kurze Anlauf- und 

Bremszeiten, Impulstaste, RPM oder RCF-Eingabe 

in 10er Schritten sowie 3 Laufprogramme machen 

die Zentrifuge sehr bedienerfreundlich. 


Schleuderraum aus rostfreiem Edelstahl, 

automatische Rotorerkennung, 

Unwuchtabschaltung, Deckelverriegelung u.zuhaltung, 

Notentriegelung, 

Motorüberhitzungsschutz. 



Spezifikationen: Temperaturbereich MZ013: -20°C 

bis +40°C; Zeitschalter 1-99 Minuten 

Gewicht MZ013: 70kg, Abmessung 380 x 468 x 695 

mm (H x B x T) 

Gewicht MZ005: 43kg, Abmessung 380 x 468 x 

540mm (H x B x T) 

Die kompletten Möglichkeiten des vielseitigen 

Zubehörs sind sehr umfangreich, deswegen führen 

wir hier nur einige gängige Rotoren auf. Bitte fragen 

Sie uns nach der Lösung Ihres 

Zentrifugationsproblems. 

Kat. # Beschreibung Kapazität ml RCF Euro 

MZ013 

MZ013- 

UK 

MZ013- 

1789 

MZ013- 

1713 

MZ013- 

1735 

MZ013- 

1725 

MZ013- 

4345 

MZ013- 

1717 

MZ013- 

1462 

MZ013- 

1794 

MZ013- 

1790 

MZ013- 

5133 

MZ013- 

1793 

Kühlzentrifuge bis - 

20°C 

Zentrifuge ohne 

Kühlung 

Winkelrotor 45° 

aerosoldicht 

250ml max. 4.679,00 

250ml max. 2.849,00 

30 x 0,5/1,5/2,0ml 24.400 468,00 

Ausschwingrotor 2-fach MTP, 45° 1.968 758,00 

Gehänge für MZ013- 

1713 

Leichtmetallgehänge 299,00 

Ausschwingrotor 4-fach MTP, 90° 2.147. 419,00 

Nutgehänge f. 

MZ013-1725 

Ausschwingrotor 10fach 

45° 

Reduzierung f. 

MZ013-1717 

Ausschwingrotor o. 

Gehänge 

Leichtmetallgehänge 

für-1794 

Reduzierung für - 

1794 

Reduzierung für - 

1794 

1 Edelstahlgehänge 119,00 

m. Geänge f. 10 x 

50ml Falcons 

4.556 579,00 

für 15ml Falcons 12,00 

4-fach 2.808 434,00 

für 1 x 250ml 85,00 

1 x (4x15ml Falcon) 2.808 45,00 

1 x (2x15ml 

Falcons) 


2.808 47,00


MZ013- 

1726 

MZ013- 

1742 

MZ013- 

1748 

Ausschwingrotor 6-fach 90° 2.808 437,00 

Nutgehänge für 7x15ml/17x100 43,00 

Rotor für ZYTO 

Becher 


8 fach 579,00 





P.O. Box 1329 


Germany 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Micro-Centrifuge, now with second rotor for 2 strips of 8 PCR Tubes 

- this compact centrifuge is an ideal 

supplement for each laboratory, that 

must spin down small samples as DNA, 

RNA, Proteins etc. for preparing further 

investigations. 

- speed 6.200 rpm ( relative centrifuge 

force 2.000g), rotor for 6 x 1,5ml or 2 

strips of 8 x 0,2ml tubes (optional) 

- improved latch lock and hinge of the 

transparent lid, less risk of damage 

- improved safety, with separate turn on/off switch, autostopp 

when opening the lid 

ultraquite motor, tested for 2.500 hours 

- unit size around 13cm diameter, weight 830g 

Cat.# description Power requirement Euro 

MZ001-N Micro-centrifuge 220Volt,50Hz 219,90 

MZ001-A-0.5 Adapter for 0,5ml 6 Adapters 6,50 

MZ001-A- 

0.4/2 

MZ001-A- 

8x0,2 

Adapter for 

0,4/0,2ml 

6 Adapters 6,50 

Rotor for 8er-strips 0,2ml PCR-Tubes 29,90 


This centrifuge is now presented in a new design as a very place 

saving combination of centrifuge and vortex mixer. The instrument 

eliminates long ways beetween centrifugation and sample mixing. 

The microcentrifuge tubes fit through the orifice of the lid for vortex 

mixing. 

he constant centrifuge speed is 2.400 r.p.m. at 700 x G, the vortex 

speed is also 2.400 r.p.m. The weight is 2 kg, dimensions are 130 x 

170 x 100mm. The centrifuge - vortex mixer is supplied with 2 rotordiscs 

for 12 x 0,5ml and 0,2ml and 12 x 1,5ml tubes. 

file:///F|/Kisker/Kisker/mini_d.htm (1 von 10) [08.12.2005 22:32:20]



MZ002 Centrifuge/Vortexmix. 220Volt, 50Hz 289,00 

MZ002-A-8x0,2 Rotor for 8er-strips 0,2ml Tubes 25,00 

Multi-Fuge, 3500 r.p.m.: centrifuge or vortex, both in combination 

centrifuge:1.000 - 3.500 rpm, 100- steps chooseable 

vortexen:soft - medium - hard 

combine 

1- 99 minutes timer, 999 repeats 

rotor discs inclusive for 12x1,5ml and 12 x 0,5/ 12x 0,2ml 



MZ009-A-8x0,2 Rotor for 8-Strips-0,2ml tubes 0,2ml Tubes 25,00 

SM-9000 Microcentrifuge for 12 x 1,5/2,0ml 

small - handy - fast, 

within 2 seconds up to 9000 r.p.m. constant speed, 5.000 x g, 

lid open > dynamic breaking 

rotor inclusive for 12 x 1,5ml/2,0ml tubes, 

brushless run in solid metal housing, 

dimensions: 200 x 170 x 150mm (LxWxH) 


MZ008 220V, 50-60Hz 449,00 

EBA 20 small centrifuge for 8 x 15ml Tubes 



The practical and handy EBA 20 is the ideal centrifuge for low sample 

quantities. It is supplied with an 8-place angle rotor and fitted with the E 

control panel. 

The rotor can be used with following tubes: 

8 x 15ml (17 x 100mm ) 

4 x 15ml, Falcons with Screwcaps (17 x 120mm ) 

8 x 9 - 10ml Blood collection tubes ( 16,5 x 92mm ) 

4 x 8ml Bloodcollection tubes ( 16 x 125mm ) 

8 x 8,5 - 100ml Blood collection tubes (16x100mm) 


speed: 6.000 r.p.m, to set in steps of 100, 3.421 x g 

dimension/weight: 215 x 231 x 292 (HxWxD), 4kg 


MZ007 208-240V, 50/60Hz 679,00 

Laboratory-Centrifuge for 50 ml Falcons and Microtestplates 

MZ-014 is a modern benchtop laboratory medical 

centrifuge useful for sedimentation of cells, bacteria, 

yeast, formed blood elements. It provides operation 

with tubes and microtest plates. MZ014 is designed 

for safe work (metal protecting housing), easy 

maintenance and wide application range in medical, 

biochemical, industrial and other type laboratories 


variable speed 1000 - 3000 r.p.m. 

Display LCD 




MZ014 

Laboratory-Centrifuge, 220 Volt, 

50 Hz 

1.190,00 

MZ014-MTP Rotor for 2 Microtestplates 145,00 

MZ014-17100 

swing out rotor for 12 x 10 

ml/17x100 mm 

165,00 

"Smart Runner", Microlitercentrifuge for molecularbiology, powerful and 

low priced, 14.000 r.p.m.,15.558 x g 



This microlitercentrifuge is delivered complete with angel rotor 

inclusive lid for 12 x 1,5/2,0ml tubes. Smart Runner is going quickly to 

the maximum speed and fits on small space on the laboratory desc. 


lid locking and holding device 

lid-open-button 

emergency lid lock release 

motor overheating protection 

imbalance switch-off 

settings of parameters by foil keyboard 

speed increments 100 r.p.m., continous run, short run 

timer 1 to 99 minutes 

dimensions 198 x 231 x 292 mm (HxWxD), weight around 6,0kg 


MZ010 Smart Runner incl.Rotor 869,00 



"Cool Sprinter" Microlitercentrifuge without or with refrigeration -10°C - 

40°C, 14.000 r.p.m., 18.626 x g 

Cool Sprinter is one of the fastest in his quality. The max. 

speed is 14.000r.p.m, RCF is 18.626. With Fast Cool it cools 

in 10 to 15 minutes down to 4°C. Thermosensitive samples 

can be centrifuged carefuly because of this reliable cooling . 

The smooth running and powerful motor with service free 

drive garantes best separation results. Aerosol tight and 

autoclavable accessories is available for save handling of 

infectious material. 

Comfort: display of IS-situation during the run 




lid-open-key 

RCF-key 

speed increments 100 r.p.m 


cooling MZ011: temperature in 1°C-increments from -10 to 

40°C 

pre-cooling, stand-by cooling 


safetey: stop-display 







dimensions (HxWxD) MZ011-UK: 260 x 275 x 347 mm, 

weight 11,5kg, MZ011: 260x281x547 weight 28kg 

g-force is depending on used rotor/tube as listed below. 

Cat. # Rotor kapacity RCF (g-Force) Euro 

MZ011-UK Sprinter Centrifuge 997,50 

MZ011 

MZ011-2425 

MZ011-2424 

MZ011-2430 

MZ011-2018 

Cool Sprinter 

Centrifuge 

Lid aerosol tight for 

2424/2430 

Rotor for 24 x 1,5/2,0ml 

tubes 

Rotor for 30 x 0,5ml 

tubes 

Rotor for 4 x Strips á 

0,2ml PCR tubes 

2.660,00 

130,00 

18.662 190,00 

17.749 285,00 

12.490 218,00 

MZ011-2040 Lid for rotor 2018 35,00 

MZ011-2024 

Adapter for 0,2ml PCR 

tubes 

1,50 

MZ011-2023 Adapter für 0,5ml tubes 1,50 

Microcentrifuge without or with refrigeration -20 - +40°C, 18.r.p.m. 

Small bench top centrifuge for 

molecular biology, virology and 

bacteriology. Tube volume 0,2ml up 

to 50ml and hematocrit capillaries. 

Brushless drive guarantees 

exceptionally smooth running and 

speed stability; metal housing, 

centrifugation chamber made from 

easy to clean stainless steel; safety 

lid with window for speed control; lid 

looking and holding devise; 

automatic recognise of the rotor, 

autoclavable fixed angel and 

swinging rotors, three running 

programs can be stored; 

temperature set from 

-20°C up to +40°C; timer 1-99min., 



speed: angle rotor 18.000rpm at 

RCF of max. 31.867 

swinging rotor 13.000rpm at RCF of 

max 18.516 

Specificationes: temperature 

MZ005: -20°C bis +40°C; timer 1 - 

99 minutes 

weight MZ005: 36kg, dimension 

178 x 333 x 620 mm (H x W x D) 

weight MZ005-UK: 16kg, dimension 

278 x 333 x 390mm (H x W x D) 

Cat. # Description Capacity ml or mm RCF Euro 

MZ005 

MZ005-UK 

MZ005- 

1154 

MZ005- 

1157 

MZ005- 

1195 

MZ005- 

2024 

MZ005- 

2023 

MZ005- 

1189 

MZ005- 

1158 

MZ005- 

1160 

MZ005- 

1161 

MZ005- 

1377 

MZ005- 

1378 

Centrifuge 

w.refrigeration 

Centrifuge without 

refrigeration 

50ml max. 2.989,00 

50ml max. 1.688,00 

Swing out rotor 90° 24 x 0,5/1,5/2,0ml 18.516 899,00 

Angle rotor with lid 12 x 0,5/1,5/2,0ml 23.907 175,00 

Angle rotor, aerosoltight 

Adapter for 0,2ml 

PCR tubes 

Adapter for 0,5ml 

tubes 

Angle rotor, aerosoltight 

Angel rotor,alu, 2 

rows 

Angel rotor f. PCR- 

Strips 

Drum rotor, 6-fold w. 

lid 

24 x 0,5/1,5/2,0ml 31.514 255,00 

1,50 

1,50 

30 x 0,5/1,5/2,0ml 21.255 285,00 

48 x 1,5/2,0ml 21.255 upper r. 405,00 

6 x 8x0,2ml 18.845 298,00 

60 x 1,5ml 14.150 519,00 

Drum rack 10 x 1,5/2,0ml 14.150 25,00 

Drum rack 32 x 0,4ml Beckman 14.150 42,95 



MZ005- 

1379 

MZ005- 

1020 

MZ005- 

1013 

MZ005- 

1015 

MZ005- 

1016 

MZ005- 

1023 

Drum rack 21 x 0,8 Bd oder 21 x 0,5ml 14.150 42,95 

Swing out rotor for 

MZ005 only 


MZ005 only 


MZ005 only 

Angel rotor for MZ005 

only 

8x10ml/17x70; 5ml/12x75 2.879 204,50 

6x15ml/17x100; 10ml/17x70 2.879 158,00 

12x15ml/17x100; 12x5ml/12x75 4.105 355,00 

6x50ml/29x107; 3x50ml/Falcon 3.904 340,00 

Hematocrit-rotor w.lid 24 capillaries 21.382 204,50 

Universal 32, without or with refrigeration -20°C up to +40°C, 18.000 r.p.m. 

These universal table centrifuge is useful for 

sedimentation of cells, bacteria, yeast, 

DNA/RNA and for proteinprecipitation. 

Universal 32 means perfectly smooth running at 

both high and low speeds, versatility, an 

enormous range of easily interchangable 

accessories and high RCF (23.907 for 

microtubes, 9.418 for 85 ml tubes). Tubes in 

volume from 0,2ml to 100ml, microtiterplates, 

haematocrit capillaries and ZYTO-accessories 

can be used at small lab-space. Extremly short 

run up- and run down times, impulse-button, 

RPM or RCF-setting in 10- steps as well as 3 

runningprogramms make the centrifuge user 

friendly. 

Specificationes: Temperaturerange MZ012: - 

20°C to +40°C; Timer 1-99 minutes 

weight MZ012: 52 kg, dimension 346 x 401 x 

695 mm (H x W x D) 

weight MZ012-UK: 29 kg, dimension 346 x 395 

x 520 mm (H x W x D) 

br> The complete assessories are available on 

request, please ask us for the possibilties for 

your tube, so fare not listed. 

Cat. # Description Capacity in ml RCF Euro 

MZ012 

Cooling 

centrifuge 

file:///F|/Kisker/Kisker/mini_d.htm (7 von 10) [08.12.2005 22:32:20] 

100ml max. 3.685,00


MZ012- 

UK 

MZ012- 

1689 

MZ012- 

1612 

MZ012- 

1613 

MZ012- 

1420 

MZ012- 

1622 

MZ012- 

1645 

MZ012- 

4345 

MZ012- 

1617 

MZ012- 

1619 

MZ012- 

1462 

MZ012- 

1624 

MZ012- 

1381 

MZ012- 

1650 

MZ012- 

1626 

Centrifuge 

without 

cooling 

Angel rotor 

45°aerosol 

tight 

Angel rotor 

with lid 

Angel rotor 12place 

Angel rotor 

aerosoltight 

Swing out 

rotor w. 


Swing out 

rotor 

suspension f. 

MZ012-1645 

Swing out 

rotor w. 


Swing out 

rotor w. 


Adapter 

Swing out 

rotor 

100ml max. 1.935,00 

for MZ012 only 30 x 

0,5/1,5/2,0ml 

21.255 439,00 

12 x 0,5/1,5/2,0ml 16.602 195,00 

12x15ml/17x100; 

6x15ml/Falcon 

4.146 275,00 

24 x 0,5/1,5/2,0ml 21.382 259,00 

2-place MTP 2.093 899,00 

4-place MPT 1.896. 399,00 

1 steel suspension 122,00 

8 x 50ml Falcon, 

45° 

6 x 50ml Falcon, 

90° 

for use of 15ml 

Falcons 

3.857 379,00 

2.701 359,00 

12,00 

4-place 2.665 297,00 

Metal beaker 1 x100ml 84,50 

Hematocritrotor 

w.lid 

Rotor with 

ZYTO beaker 

24 capillaries 269,00 

6 place 2.093 1.085,00 

Rotina 35, without or with refrigeration -20°C up to +40°C, 15.000 r.p.m., 

RCF up to 24.400 



The high performance bech-top centrifuges 

Rotina 35 impress by state-of-the-art 

technology, large capacity, extremely easy 

handling and exeptionally smooth and quiet 

running. They are mainly used in the fiels of 

diagnostic, genetic research and 

microbiology. Volumes from 0,2ml up to 

250ml at large capacities as 10 x 50ml 

Falcons, 48 x 15ml or 4 x 250ml are no 

problem. Extremly short run-up and run down 

times, impulse-button, RPM input in 

increments of 10 or RCF-input in increments 

of 1 as well as 3 running programms make 

this centrifuge very easy to operate. 

It features also high safety standards: 

metalhousing and -lid, automatic 

rotorrecognition, imbalance switsch of, lid 

locking and holding, emergency lid lock 

release, brushless induction drive. 

Specificationes: Temperaturerange MZ013: - 

20°C to +40°C; Timer 1-99 minutes 

weight MZ013: 70kg, dimension 380 x 468 x 

695 mm (H x B x D) 

weight MZ013-UK: 43kg, dimension 380 x 

468 x 540mm (H x B x D) 

The complete assessories are available on 

request, please ask us for the possibilties for 

your tube, if not listed. 

Cat. # Description Capacity ml RCF Euro 

MZ013 Cooling 

centrifuge 

MZ013- 

UK 

MZ013- 

1789 

MZ013- 

1713 

MZ013- 

1735 

MZ013- 

1725 

Centrifuge 

without cooling 

Angel rotor 

45°aerosol tight 

Swing out rotor 

Suspension for 

MZ013-1713 


250ml max. 4.679,00 

250ml max. 2.849,00 

30 x 

0,5/1,5/2,0ml 

2-place MTP, 

45° 

24.400 468,00 

1.968 758,00 

Metalsuspension 299,00 

4-place MTP, 

90° 

file:///F|/Kisker/Kisker/mini_d.htm (9 von 10) [08.12.2005 22:32:20] 

2.147. 419,00


MZ013- 

4345 

MZ013- 

1717 

MZ013- 

1462 

MZ013- 

1794 

MZ013- 

1790 

MZ013- 

5133 

MZ013- 

1793 

MZ013- 

1726 

MZ013- 

1742 

MZ013- 

1748 


MZ013-1725 


10-place 45° 


MZ013-1717 


w/o suspension 

Metalsuspension 

for-1794 

Suspension for - 

1794 

Suspension for - 

1794 

1 steel 


w. suspension f. 

10 x 50ml 

Falcons 

119,00 

4.556 579,00 

for 15ml Falcons 12,00 

4-place MTP, 

90° 

2.808 434,00 

for 1 x 250ml 85,00 

1 x (4x15ml 

Falcon) 

1 x (2x15ml 

Falcons) 

2.808 45,00 

2.808 47,00 

Swing out rotor 6-place 90° 2.808 437,00 


MZ013-1726 

Rotor for ZYTO 

Becher 

f. 

7x15ml/17x100 

43,00 

8-place 579,00 






P.O. Box 1329 


Germany 



This economical microprocessor controlled dry block heat 

bath can run either two tube-blocks or one microtiter block. 

The digital LCD readout monitors the temperature in REAL- 

TIME and displays the target temperature. The heating 

range goes from room- temperature to 130°C at a 

temperature stability of +/- 0,3°C. The interchangable blocks 

for tubes are equipped with a safety tube cover which 

eliminates the pop open of tube caps during heating. The 

instrument is compact ( 33 x 22 x 8 cm, LxBxH) and needs 

only the space of a DIN A4 page. The weight is 2 kg without 

blocks and 3,6 kg with blocks. 


L001-I Dry Block Heat Bath for 2 blocks 619,00 

L001-III Dry Block Heat Bath for 1 blocks 479,00 

L001-30K 30 x 0,5ml block conical holes 129,75 

L001-24P 24 x 1,5/2,0ml block parallel holes 129,75 

L001-24K 24 x 1,5/2,0ml block conical holes 129,75 

L001-48K 48 x 0,2ml block conical 129,75 



L001-0000 Undrilled block plain 60,85 

Blocks for 

Microtitre plates 


L001-96U 96 wells round U-Falcon 347,65 

L001-96F 96 wells flat 347,65 

file:///F|/Kisker/Kisker/block_d.htm (1 von 6) [08.12.2005 22:32:21] 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 



L001-96V 96 wells V-Costar 347,65 

L001-96T 96 x 0,2ml plate 


for PE9600 

Cycler 

347,65 

This small dry block heat bath is a very economical alternative to 

large-scale multi block heat bathes. The heating range goes from 

ambient to +100°C, the active and choosed target temperature is 

read at the LCD-display. The lid of the dry block heat bath may be 

closed to protect user from high temperated blocks and to increase 

temperature stability. 

The aluminium block -1 has capacity for 21 x 0,5ml and 32 x 1,5ml 

tubes. 

The aluminium block -2 has capacity for 50 x 0,2ml tubes, 21 x 0,5ml 

and 32 x 1,5ml tubes. 

It takes 25 minutes to reach the maximum temperature of 100°C, the 

temperature stability is 0,2°C. 



Cat. # Description form Euro 

L019 / L019-1 Dry block heat bath 

L019 / L019-1 Dry block heat bath 

incl. Block 53 

places 

incl Block 103 

Places 


In most molecularbiology laboratories is it necessary to control 

temperature of the used enzymes and reagent-mixes. This compact 

and small dry block cool bath is a very economical alternative to ice 

buckets with the advantage to keep samples on a specific 

temperature. The instrument is working on the peltier principle with a 

temperature range from - 10°C to +100°C. 

The temperature settings are made by touch pad and shown by a 

digital display. 

Two modells are available: block for 20 x 0,5ml and 12 x 1,5ml tubes, 

total 32 places and block for 20 x 1,5ml tubes. 

Specification: dimension 190 x 225 x 115mm, weight: 4,1kg 


489,00 

549,00 

Cat. # Description blockversion Euro 

L022-N-32 Dry block cool bath 20x0,5/12x1,5ml 980,00 

file:///F|/Kisker/Kisker/block_d.htm (2 von 6) [08.12.2005 22:32:21]


L022-N-20 Dry block cool bath 20x1,5ml 980,00 


Mixing and incubation or cooling are essential steps of molecularbiological 

techniques. This unit is shaking your samples efficient with an orbit of 3mm 

and keeps temperature in a wide range from 4 to 99°C. The microprocessor 

controled electronic and high quality peltiers garant temperature accuracy 

and - constanty. Thermomixer is easy to use by 9 programms with 9 steps 

each. 4 easy interanchable blocks ensure for necessary flexibility during the 

daily work in the lab 









weight: 5,9kg inclusive block, dimensions 190 x 190 x 325 mm, power 125 

Watt , 230V/115V AC, 50/60Hz 



L057-0,2 Block for 96 x 0,2ml tubes 325,00 

L057-0.5 Block für 24 x 0,5ml tubes 259,00 




Thermo - Shaker is space saving, compact alternative for 

shaking and heating of microtubes at one time . 







weight: 3,5kg, dimension 205x230x130mm, power 

extern:12Volt/4 Ampere 





L056-32 block for 20x0,5ml and 12x1,5ml Tubes 149,00 

L056-32-02 

Block for 20x0,2ml and 12x1,5ml 

Tubes 

169,00 

L056-20 block for 20x1,5ml tubes 139,00 

L056-20-2.0 block for 20x2,0ml tubes 149,00 


The Shaking Incubator allows you to heat and shake your samples 

simultaneously. A microprocessor controlled temperature/time-modul 

garantes an evan temerature stability. The temperature transfer by air 

recirculation heats your sample fast and independant from long warm 

up times. Choosed and real temperature are shown on the digital 

LCD-display, the clear acrylic lid allows a visual control. The unit is 

equipped with a security switch, which stopps the shaking process 

when opening the lid. 


temperature range: 4°C over ambient to 80°C 



timer 0-9Std, 59Min. 




L051 Shaking-Incubator 1.599,00 

L051-1,5 Platform for 56 x 1,5/2,0ml Tubes 144,90 



L051-MTP Platform for 4 Microtiter plates 144,90 








weight 7kg, dimensions 360 x 270 x 240mm 



Microprocessor controled Waterbath / magnetic stirred Waterbath 

temperature accuracy of 0,1°C. 


heatingrange 30 to 100°C, 

LED display 

magnetic stirrer speed 300 - 1000r.p.m. 

weight 4kg, 

dimension 340 x 170 x 170mm 

dimension with magnetic stirrer 340x 170 x 200mm 


weight/outer dimension: L042-6 = 8kg, 28 x 28,5 x 32,5cm 

/L042-12: 10kg, 40,5 x28,5 x 32,5cm 


L042 Waterbath 220 Volt, 50Hz 599,95 

L043 Wb/magnetic stirrer 220 Volt, 50Hz 689,90 


weight/outer dimension: L042-6 = 8kg, 28 x 28,5 x 32,5cm /L042-12: 

10kg, 40,5 x28,5 x 32,5cm 





Top of page Back to the website # 





P.O. Box 1329 


Germany 


Trockenblock Heizgerät I und III 

Diese mikroprozessorgesteuerten Heizgeräte bieten Platz 

für einen Block, Typ III, oder zwei Blöcke, Typ I. Das digitale 

LCD zeigt die aktuelle oder die gespeicherte Zieltemperatur 

an. Der Heizbereich erstreckt sich von Raumtemperatur bis 

130°C bei einer Temperaturstabilität von 0,1°C. Externe 

Temperaturfühler ermöglichen die Temperaturkontrolle im 

Tube oder Block. Wir empfehlen die Verwendung der 

geeichten Temperaturfühler zur optimalen 

Temperaturkontrolle. 

Die Blöcke sind mit Sicherheitsdeckeln ausgerüstet, die ein 

Aufspringen der Tubes während der Aufheizphase sicher 

verhindern. Das Gerät mit den Dimensionen 21 x 25 x 

8cm(BxTxH) benötigt nur die Fläche eines DIN A4 -Blattes. 

Das Gewicht beträgt ohne Blöcke 2,7 kg. 


L001-I 

L001-III 

Trockenblock 

Heizgerät 

Trockenblock 

Heizgerät 

für zwei 

Blöcke 

für einen 

Block 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


619,00 

479,00 


L001-24P 

L001-24K 

24 x 1,5/2,0ml 

Block 

24 x 1,5/2,0ml 

Block 

parallel 129,75 

konisch 129,75 




L001-0000 ohne Bohrung 60,85 

file:///F|/Kisker/Kisker/deutsch/block_d.htm (1 von 6) [08.12.2005 22:32:22]


Blöcke für 

Mikrotiterplatten nur für 

Trockenblockheizgerät I 

(L001-I) 


L001-96U 96 wells rund U-Form 347,65 

L001-96F 96 wells Flachboden 347,65 

L001-96V 96 wells V-Form 347,65 

L001-96T 96 x 0,2 Tubes für Cycler 347,65 

Trockenblock-Heizgerät II 

Dieses kleine Gerät ist eine preisgünstige Alternative zu aufwändigen 

Mehrblockgeräten. Der Heizbereich erstreckt sich von 

Raumtemperatur bis +100°C, die aktuelle bzw. gewählte 

Zieltemperatur wird über die LCD-Anzeige abgelesen. Der Deckel 

kann zum Schutz bei hohen Temperaturen bzw zur Verbesserung 

der Temperaturstabilität geschlossen werden. Die Aufheizzeit bis 

100°C beträgt 25 Minuten, die Temperaturstabilität 0,2°C. 

Aluminiumblock -1: Bohrungen für 21 x 0,5ml und 32 x 1,5ml Tubes 

Aluminiumblock -2: Bohrungen für 50x0,2ml, 21 x 0,5ml, 32 x 1,5ml 

Tubes 

Spezifikation: Größe 21 x 20 x 10cm, Gewicht: 4kg 

Anschlußwerte: 220Volt/50Hz/400Watt 


L019 / L019-1 Trockenblock Heizger. 

L019 / L019-1 Trockenblock Heizger. 

inkl Block 53 

Plätze 

inkl Block 103 

Plätze 

Mini Trockenblock Heiz- und Kühlgerät -10°C bis +100°C 

file:///F|/Kisker/Kisker/deutsch/block_d.htm (2 von 6) [08.12.2005 22:32:22] 

499,00 

549,00


In vielen molekularbiologisch arbeitenden Laboratorien ist es nötig, 

die Temperatur der eingesetzten Enzyme und Reagenzien zu 

kontrollieren. Dieser kompakte kleine Trockenblock Heiz - Kühlgerät 

ist eine ökonomische Alternative zu Kühl- und Heizblockgeräten. Das 

Gerät arbeitet auf dem Prinzip der Peltiertechnik in einem weiten 

Temperaturbereich von -10°C bis 100°C. Einstellungen erfolgen 

bedienerfreundlich über die Folientastatur, Gewählte und 

Zieltemperatur sind über die Digitalanzeige ablesbar. 

Timer:1 Minute bis 96 Stunden, Umgebungstemperaturbereich: 15 - 

27°C 

Timer:1 Minute bis 96 Stunden, Umgebungstemperaturbereich: 15 - 

27°C 

Temperaturabweichung im Zentrum des Blockes circa 1°C, 

Temperaturabweichung im Randbereich des Blockes circa 2°C 


Abmessung 190 x 225 x 115mm, Gewicht: 4,1kg 

Anschluß: 220Volt/50Hz/100Watt 

Kat. # Beschreibung Blockversion Euro 

L022-N-32 Trockenblockheiz/kühlgerät 20x0,5/12x1,5ml 980,00 

L022-N-20 Trockenblockheiz/kühlgerät 20x1,5ml 980,00 


Mischen und Inkubieren bzw. Kühlen sind wesentliche Arbeitsschritte 

molekularbiologischer Techniken. Dieses Gerät schüttelt Ihre Proben effizient 

mit einer Amplidude von 3mm und temperiert in einem sehr weiten Bereich 

von 4 bis 99°C. Die Mikroprozzessor gesteuerte Elektronik und hochwertige 

Peltiertechnik gewähren Temperaturgenauigkeit und - konstanz. Zu bedienen 

ist das benutzerfreundliche Gerät über 9 Programme mit jeweils 9 Schritten. 

Vier einfach austauschbare Blöcke sorgen für die erforderliche Flexibilität im 

Laboralltag. 


Temperierbereich: 4 - 99°C 

Temperaturstabilität: +/- 0,5°C 

Schüttelgeschwindigkeit: 300 - 1500r.p.m., wählbar in 50iger Schritten 

Aufheizgeschwindigkeit: 5°C/min 

Abkühlgeschwindigkeit: 4°C/min von 99 bis 20°C, 1°C/min von 20 bis 4°C 

alle Werte beziehen sich auf den Temperaturbereich von 15 bis 35°C 

optional mit RS 232 Schnittstelle lieferbar 

Gewicht: 5,9kg inklusive Block, Abmessungen 190 x 190 x 325 mm, Leistung 

125 Watt , 230V/115V AC, 50/60Hz 





L057-0,2 Wechselblock für 96 x 0,2ml Tubes 325,00 





Thermo - Shaker ist ein kleines platzsparendes Gerät zum 

gleichzeitigen Schütteln und Temperieren von Mikrotubes. 


Temperatur, Geschwindigkeit und Zeit Mikroprozessor 

gesteuert 

Schüttelfrequenz: 250 - 1.400r.p.m., Amplitude 2mm 

Heizbereich: 25°C bis 100°C 

Zeitschaltuhr 1 Minute bis 96 Stunden 

3 austauschbare Blöcke 

Gewicht: 3,5kg, Abmessungen 205x230x130mm, 

Anschluss:12Volt/4 Ampere 



L056-32 Block für 20x0,5ml und 12x1,5ml Tubes 149,00 

L056-32-02 Block für 20x0,2ml und 12x1,5ml Tubes 169,00 

L056-20 Block für 20x1,5ml Tubes 139,00 

L056-20-2.0 Block für 20x2,0ml Tubes 149,00 

Schüttel-Inkubator für Mikrotestplatten oder Mikrozentrifugenröhrchen 



Ein Mikroprozessor gesteuertes Temperatur/Zeitmodul gewährleistet 

eine gleichmäßige Temeraturkonstanz. Die Temperaturübertragung 

erfolgt über Luftumwälzung. Ziel- und Istwerte sind über die digitale 

LCD-Anzeige ablesbar, der durchsichtige Plexiglasdeckel erlaubt 

zusätzliche visuelle Kontrolle. Das Gerät ist mit einem 

Sicherheitsschalter ausgerüstet, der den Schüttelvorgang bei Öffnen 

des Deckels stoppt. 


Temperaturbereich: 4°C über RT bis 80°C 

Temperaturgenauigkeit: +/- 0,3°C 

Schüttelfrequenz: 250 – 1.250 r.p.m., Orbit: 3mm 

Timer 0-9Std, 59Min. 

Heizleistung: 300 Watt 

Abmessungen: 280 x 240 x 210mm Gewicht: 9,0 kg 


L051 Trockenblock Kühl-/Heizbad 1.599,00 

L051-1,5 Plattform für 56 x 1,5/2,0ml Tubes 144,90 



L051-MTP Plattform für 4 Mikrotestplatten 144,90 


Wasserbad mit hoher Temperaturgenauigkeit 

Rostfreier Edelstahltank mit 8 Liter Kapazität. 

Heizbereich RT bis 100°C,Vorwahltemperatur und 

tatsächliche Temperatur über LED Anzeige 

Gewicht 7kg, Abmessung 360 



Mikroprozessor gesteuerte Wasserbäder 



Temperaturgenauigkeit von 1 bis 2°C. 

Rostfreier Edelstahltank mit 4 l Kapazität. 

Heizbereich 30°C bis 100°C,LED Anzeige 

Magnetrührergeschwindigkeit 300 - 1000rpm 

Gewicht 4kg, Abmessung 340 x 170 x 170mm 

Abmessung mit Magnetrührer 340x 170 x 200mm 


Gewicht/Außenmaße: L042-6 = 8kg, 28 x 28,5 x 32,5cm 

/L042-12: 10kg, 40,5 x28,5 x 32,5cm 


L042 Wasserbad 220 Volt, 50Hz 599,95 

L043 Wasserbad/Magnetrührer. 220 Volt, 50Hz 689,90 


Gewicht/Außenmaße: L042-6 = 8kg, 28 x 28,5 x 32,5cm /L042-12: 

10kg, 40,5 x28,5 x 32,5cm 








P.O. Box 1329 


Germany 


Horizontal Gel Tanks 

Our Horizontal-Electrophoresis tanks are worldwide established 

submarine electrophoresis tanks. They are featuring robustness and 

high quality. Gel tanks, lids and trays are made from acryl, resistant 

against cracking by filling hot agarose. Rubber feet garantee a safe 

stand. 

A big range of high quality combs garantees excellent results and 

reproducability, platin electrodes and stabel connections garant a 

reliable electrical field during the run. Corrosion free connections, 

electrode leads and leading the platin-electrodes over the full width of 

tank avoid effects as "Smiling". 

Gels of Minigel can be casted userfriendly either in gel casting 

systems or direct in the tank by a 90° turn of the gel tray. Midigels 

can be casted in the casting system. No need for casting tapes any 

more. 

All gel trays have several slots for the combs, to run shorter gels with 

higher sample quantity. The trays are UV-transparent, therefor the 

gels can be photographed on the tray/transilluminator without the risk 

of damaging the gels. Minigel "View" with UV-transparent bottom is 

very useful for isolation of DNA-fragmentes from "Low-melt- 

Agaroses". 

The whole tank can be placed during the run on a transilluminator, to 

view the progress of the separation for "Low-melt-Agarosen". 

The saftey concept protects the user. A contact of any parts/buffer 

under voltage is not possible with exeption of the microgel tank, 

which works in the harmless low voltage area under 40Volt. 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Microgel with Power supply: Gel size 5 x 6 cm (W x L) 

file:///F|/Kisker/Kisker/thermal_d.htm (1 von 13) [08.12.2005 22:32:24]


Eine kleine Kammer für schnelle Auftrennung von Nukleinsäuren und 

Restriktionsfragmenten im Agarosegel. Diese Kammer wird mit einem 

Niederstrom-Netzteil geliefert und ist besonders für Praktika geeignet. 

Die Microgelkammer ist aus einem Stück produziert und daher 

unverwüstlich., die Laufzeit beträgt circa 30 – 45 Minuten. 






Lieferumfang: Microgel-Kammer mit Platinelektroden, UV-Träger, 

Netzteil, 1 Kamm 2,0mm - 5 Zähne 


sample size, 4mm 

well 

Euro 

EHO-7 Microgel with Power supply 270,00 



Gel casting systems 

Gel casting systems are used for the preparation 

of several gels. UV-transparente gel trays fit 

exactly into the gel casting stands, which enables 

the user to cast gels without taping. 

The gel casting stand E-VG is made from 

aluminium and causes fast heat diversion of hot 

agarose. This casting systems can be used for 

Mini- and Midigels. 

Cat. # Description fitting to Euro 

E-VG 

EHO-1- 

GS 

EHO-2- 

GS 

EHO-3- 

GS 

EHO-4- 

GS 

variable gel casting 

system 

Mini- u. 

Midigels 

295,00 

Casting system 3 Minigels 89,00 

Casting system 2 Midigels 89,00 

Casting system 2 Midigels B 89,00 

Casting system 1 Midigel MB 105,00 




A small tank for fast separation of nucleic acids and DNA fragments 

in agarose gels; 



Separation lenght with one Comb: 7 cm, two Combs: 3,5 cm 




Complete unit includes: Minigel-Tank with platin electrodes, UV-tray 

with seals, 2 combs of choice, levelling bubble, rubber feet 


Sample size, 4mm 

well 

Euro 

EHO-1 Minigel, complete unit 279,00 









EHO-1-UVT UV-tranparent tray 7 x 8,3 cm 79,00 


EHO-1-GS Casting system for 3 Minigels 89,00 




Tank for analytic and preparative experiments, PCR-screening and 

RFLP 



Separation lenght with one Comb: 12,6 cm, two Combs: 6,3 cm 




Complete unit includes: Midigel-Tank with platin electrodes, UV-tray 

with seals, 2 combs of choice, levelling bubble, rubber feet. 




Sample size, 4mm 

well 

Euro 

EHO-2 Midigel, complete unit 369,00 

















EHO-2-UVT 

UV-transparent tray 12 x 14 

cm 

89,00 


EHO-2-GS Casting system for 2 Midigels 89,00 

Midigel B: gel size 14,5 x 10,2 cm (W x L) 

Wide Tank for separation of DNA/RNA-fragments, PCR-screening 

and RFLP 




Gel casting in gel casting system 

Unit dimension: 23,5 x 20,5 x 8,5 cm (B x L x H) 

Complete unit includes: Midigel-B-Tank with platin electrodes, UVtray 






well 

Euro 

EHO-3 Midigel B, complete unit 399,00 







EHO-3-UVT 

UV-transparent tray 14,5 x 

10,2 cm 

95,00 

EHO-3-GS Gel-casting-system for 2 trays 89,00 




Midigel MB: gel size 23 x 16 cm (B x L 

Maxi-Wide Tank for separation of DNA/RNA-fragments, PCRscreening 

and RFLP 




Gel casting direct in the gel casting system 


Complete unit includes: Midigel-MB-Tank with platin electrodes, UVtray 




well 

Euro 

EHO-4 Midigel MB, complete unit 585,00 









EHO-4-GS 

Gel casting system for one gel 

tray 

105,00 



Maxigel: gel size 20 x 25 cm (W x L) 

Tank for DNA/RNA analysis and fast PCR-screening of samples 




Gel casting direct in UV-tray 

Unit dimension: 29,5 x 41,5 x 10 cm (B x L x H) 

Complete unit includes: Maxigel-Tank with platin electrodes, UV-tray 

with casting gates, 3 combs of choice, levelling bubble, rubber feet. 

Kat. # Description 


well 

Euro 

EHO-5 Maxigel, complete unit 575,00 










EHO-5-S casting gate 14,00 






Tank with UV-light transparent bottom, very useful for isolation of 

DNA-fragments from Low-melting-agaroses. This tank can be placed 

during the run on a transilluminator, to view the progress of the 

separation 







Complete unit includes: Minigel-Tank with platin electrodes, 2 combs 

of choice, levelling bubble, rubber feet. 



well 

Euro 

EHO-6 Minigel "View", complete unit 299,00 















Power Supplies Series 100 replaced by EV243 



The E100 mini power supplies are replaced now by the technical 

improved EV143 power supply to cover the ideal voltage range 

generally used with small electrophoresis units( mini horizontal and 

mini verticval). EV143 is space saving on the laboratory bench. It is 

produced to meet worldwide safety standards. None of the outlets is 

direcly wired to the earth for increased safety. Userfriendly design 

garants a fast and easy handling. Up to three electrophoresis 

chambers can run at same time. The user is protected against 

overload condition including accidental short circuit of the output. 

When voltage is available again, the power supply continous to run 

the electhrophoresis with preselected parameters. 

Specifikationes: 

outlets for 3 electrophorsis chambers 


Timer 

large LED-Display easy to read 

large knob for easy selection of voltage and current 

adaption of voltage during the run 


useful for horizontal and vertical minigeles 

Dimensions: 24 x 20 x 13 cm (WxDxH) , weight 3 kg 


EV243 

(E143) 

400 250 50 459,00 


Power Supplies of Series 800 are powerful, prgrammabable units for 

all application areas according to their specification. They are 

produced with all safetey-standards as a selftest bei switching on and 

garant a fast and easy handling. Up to four electrophoresis units can 

be used at same time. The user is fully protected against overload 

and short circuits, when voltage/current is available again, the 

experiments continous according to the preseted parameters. All 

units with exeption of modell E844 are equipped with a volt-hourintegrator 





all models can run with constant voltage, current or power, automatic 

cross-over 


Dimensions: 30 x 18 x 12 cm (BxTxH) , Weight 



E835/831/844/863/865/ 5 kg, E832 6 kg, E802/861/815/833/862 10 

kg 

Cat. #: Voltage V Current mA Power W Euro 

EV231 (E835, E831) 300 1000 150 615,00 

EV202 (E802) 300 2000 300 845,00 

EV243 (E844) 400 300 50 459,00 

EV265 (E863,E865) 600 500 150 749,00 

EV261 (E861) 600 1000 300 875,00 

EV215 (E815) 1200 500 300 915,00 

EV232 (E832) 3000 150 150 945,00 

EV233 (E833) 3000 300 300 1.255,00 

EV262 (E862) 6000 150 300 1.490,00 

Application 

Technique 

Sequencing Horizontale/Vertikale Gel I E F Electro- 

Elution 










Power Supplies 

Our Power Supplies have been designed according international and 

CE European standards. The power supplies are equipped with many 

user-friendly design features, which allows quick and simple opertion. 

EPS-305 und EPS 503 are equipped with a "Gelsaver", which helps, 

that the separation stays in line and the strands will not diffuse in the 

gel. 

Cat. # Voltage V Current mA Power W Euro 

file:///F|/Kisker/Kisker/thermal_d.htm (9 von 13) [08.12.2005 22:32:24] 

Semi-Dry a. 

Western 

Blotting


EPS-304 300 400 120 459,00 

EPS-305 300 500 150 599,00 

EPS-503 500 300 150 630,00 

EPS-606 600 800 300 961,00 

EPS-1006 1000 600 300 1.090,00 

EPS-1006P 1000 600 300 1.390,00 

EPS-202 200 1998 300 1.030,00 

EPS-3002 3000 300 300 1.235,00 

EPS-9009TX 3000 300 300 1.490,00 

CombiCycler 

The CombiCycler with a block-combination for 0,2 and 0,5 ml PCR-tubes 

is a compact low cost Cycler, useful for laboratories with smaller sample 

quantities. 


flexibel sampelcapacity 25 x 0,2 ml tubes and 16 x 0,5 ml PCR-tubes 

Temperature range+ 4° - + 99 °C 

temperature range of the lid +50° bis +105 °C 

temperature increment 0,1 °C 

temperature precision 0,2 °C 

temperature uniformity through the block: uo to 95 °C ± 0,5 °C, up to 72 

°C ± 0,3 °C, up to 65 °C ± 0,2 °C 

Temperature ramping speed ± 3 °C/sec 

100 Programm files: number of steps in the file:1 to 9 

number of steps in a cycle: 1 to 7 

number of cycle repeats: 0 to 99 

further speczificationes: 


weight 4,5 kg 

power supply 220/240 Volt 50/60 Hz 


LCC-41 CombiCycler inclusive Block 


25 x 0,2 ml and 16 x 

0,5 ml 

2.150,00


picture 1: PCR-products, separated in a agarose gel (0,8%, 12 x 6 cm, 

0,5 x TAE). 

5 µl each of PCR-products were loaded. Lane 1-12: PCR-products (1-12) 

of the CombiCyclers, Lane 13: 100 bp DNA Ladder Plus (MBI 

Fermentas), Lane 14-16: PCR-products (14-16) of an other reference 

thermocyclers (PCR-product 16 is the negative-controle, Lane 15 has a 

reduced volumen (10 µl instead 20 µl. 

picture 2: Comparison of temperature ramping of CombiCyclers (red) with 

an other reference Thermocycler (black) 


We are proud to offer the reliable and established Cycler equipment 

made by TECHNE. TECHGENE TC-312 has been designed for the 

individual; priced to be inexpensive to be treated as an ordinary piece of 

laboratory equipment, that everybody can own.; designed to process a 

small number of parallel samples rapidly in unprecedented cycle times, 

allowing a typical 25 cycle programme to be completed in around one 

hour, enabling the operator to achieve more PCRs in a working day. 

The TECHGENE Thermal Cycler offers following advantages: 

a very small, fast and inexpensive Cycler 

nothing is extra-an amazing list of innovative features as standard and 

with user friendly software that can acommodate all the latest PCR 

protocols such as "Touchdown", "RAPD", and "Long PCR" 

excellent performance - 1,8°C cooling and 3,0°C heating per second in 

the 55°C to 90°C range 


heated lid for oil free PCR, heating temperature 100-115°C 


two models available for 25 x 0,2ml microtubes and 20 x 0,5ml 

microcentrifuge tubes 

loading of 80 programms with 99 cycles 


FTC3105D 

Techgen inclusive 20 x 0,5ml 

Block 


20 x 0,5ml block 3.079,00


FTC3102D 

Techgen inclusive 25 x 0,2ml 

Block 

25 x 0,2ml block 3.079,00 

FTC31B02 20 x 0,5ml Block 1.065,00 


Standard Cycler TC-412 from TECHNE 

TECHNE. TECHGENE TC-412 has been designed for a bigger number of 

parallel samples. 

The TECHGENE Standard Cycler TC-412 offers following advantages: 

flexibel through the availability of different blocks 

user friendly software that can acommodate all the latest PCR protocols such as 

"Touchdown", "RAPD", and "Long PCR" 

excellent performance - 1,6°C cooling and 2,5°C heating per second in the 55°C 

to 90°C range, blockuniformity 0,3°C 


heated and hight movable lid for oil free PCR, heating temperature 100-115°C 


0,2ml - 0,5ml - 96 Well - 384 Well - In situ 

connection to PC programms with control of 32 Cyclers from one PC 


FTC41S5D TC-412 inclusive 40 x 0,5ml block 60 x 0,5ml block 5.680,00 

FTC41H2D TC-412 inclusive 96 x 0,2ml block 96 x 0,2ml block 5.680,00 

FTC4384D TC-412 inclusive 384 well block 384 well 5.985,00 

FTC41FLD Flexigene inclusive in situ-Block 5.680,00 

FTC41B5D 60 x 0,5ml block 60 x 0,5ml 1.995,00 

FTC41BHD 96 x 0,2ml block 96 x 0,2ml 1.995,00 


FTC41B384 384 well block 384 well 2.265,00 

Gradient-Cycler TC-512 from Techne 



TC-512 Gradient Cycler is useful for very high numbers of samples. Different 

blocks can be changed without tools in seconds. The big touchscreen shows 

currently the temperature development in block and the growing up temperature 

gradient. 50 Programs can be stored internaly as well as 500 onto the 

memorycard. Specifications: temperatur range 4 – 99°C 

temperature range gradient 20 - 70°C, maximum gradient 30°C (in 384 well 

block 16°C), minimum gradient 1°C 

temperature setting 0,1°C, blockuniformity 0,4°C 

heating 3°C / sec, cooling 1,8°C / sec 

heated and hight movable lid for oil free PCR, heating temperature 100-115 

dimensions: 420 x 220 x 260mm, weight 11,5kg 


FTC51S5D TC-512 inclusive 60 x 0,5ml block 7.395,00 

FTC51H2D TC-512 inclusive 96 x 0,2ml block 7.395,00 

FT51FLD TC-512 inclusive in situ-block 7.395,00 

FTC5384D TC-512 inclusive 384 well block 7.695,00 

FTC51B5D 60 x 0,5ml block 2.489,00 

FTC51BHD 96 x 0,2ml block 2.489,00 


FTC5B384 384 well block 2.795,00 






P.O. Box 1329 


Germany 



The DNA-Workstation is an UV sterilisation cabinett to 

decontaminate reagents and equipment prior to carrying out 

PCR reactions. The powerful 15 watt UV light (254 nm) of 

the DNA-Workstation denatures nucleic acids in 5-30 

minutes making them unsuitable for amplification and 

therefore eliminating any possible cross contamination. The 

DNA-Workstations are equipped with a white lamp for 

illumination. The 10 mm acrylic walls or 8 - 10 mm glas walls 

also acts as an efficient shield of beta-radioactive emissions. 

The dimensions of the DNA-Workstation are 69 x 51 x 57 cm 

w x d x h, the weight is 25 kg.The DNA-Workstations stand 

on an easy to clean stainless steel tray. 


L020: acryl sides, 2 x 254 nm UV-lamps, 1 x white light, 

lower part front to turn up 

L020C: acryl side walls, 1 x 254 nm UV-lamp, 1 x white light 

lamp and 1 x 254 nm UV/Air cleaner, which circulates the air 

along the UV-lamp for continues denaturation, lower part 

front to turn up. 

L020S: acryl side sides, 2 x 254 nm UV-lamps, 1 x white 

light, two side openings from the front side 

L020-G: glas sides, which are resistant to UV-cracking and 

can be cleaned with the medium of choice, 2 x 254 nm UVlamps, 

1 x white light, lower part front to turn up 

L020-GC: glas sides, which are resistant to UV-cracking and 

can be cleaned with the medium of choice, equipped with 1 x 

254 UV-lamp, 1 white light lamp and 1 x 254nm UV/Air 

cleaner. 

Cat. # Description power Euro 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


L020 DNA-Workstation, acryl 220Volt/50Hz 1.299,00 

file:///F|/Kisker/Kisker/dna_d.htm (1 von 14) [08.12.2005 22:32:26]


L020-C 

L020-S 

Workstation, Acryl with 

UV/Air-Cleaner 

Workstation, Acryl with Side- 

Openings 

220Volt/50Hz 1.459,00 

220Volt/50Hz 1.499,00 


L020-GC 

Workstation, Glas with 

UV/Air Cleaner 

220Volt/50Hz 1.750,00 

UV-Cleaner, the new combination of Laminar Flow and UV-light for Clean 

Rooms 

This new products provides DNA safe laboratories without direct UV-light. The 

air is constantly flowing through the instrument, which is equipped with a fan, an 

UV-lamp and a dust filter. Inside the box the density of the UV-light is increased 

1000 fold, sufficient to inactivate DNA complete. Also microbiological 

contaminations are reduced strongly. 

The UV-Laminar-Flow is able to clean 25 m3 of air/ hour to provide DNA free 

laboratory of 25 m2 within 3 hours. 

Furter advantages: 

no hepa filters to change 

ozon free high density UV contamination 




The instrument is recommended for clean room laboratories as PCR, DNA- 

Analysis, Microbiology, Virology, Tissue Culture or other rooms, where a 

contamination free area is needed. After 12 hours of air cleaning, the UV- 

Laminar Flow provides an estimated reduction of the colony forming unit to 80 - 

100 CFU/m3 air 

L046-S weight: 2,1kg, power 220/240 V0lt, 50/60Hz 30 Watt 

L046-M weight: 3,7kg power 220/240 V0lt, 50/60Hz 30 Watt. 

Cat. # description Capacity/hr Euro 

L046-M UV-Cleaner small 25m3 399,00 




This DNA-Workstation avoids crosscontamination 

by suction of the air and ductingit 

through an activated charcoal filter. All particles 

are captured and will not reach normal lab air. 

The DNA-Workstation is equipped with an 4W- 

254 nm UV-lamp and filtercassett. The hour 

counter shows the overall working time. The 

activated charcoal filter should be replaced 

every 1000 working hours. The work surface is 

made from stainless steal and easy to clean. 

The airflow is adjustable from 0 - 100%. The 

DNA-Workstation is available in 3 versions. The 

perspex cover can be moved 100mm 

backwards (exept USA version). 

Specification: electr. power: 

220Volt/50Hz/80Watt 

dimension working space: 470 x 300mm (W x 

D) 


Exterior Standard: 485 x 540 x 250mm (W x D 

x H) 

Sydney-Version: 485 x 540 x 465mm (W x D x 

H) 

USA-Version : 485 x 540 x 600mm (W x D x H) 





L016-AF act.charcoal filter 40,90 

L016- UV UV-lamp 45,00 




BIO-LINK 254 nm provides a fast and reliable method, to fix 

DNA or RNA onto nylon- or nitrocellulose membranes. The 

crosslinking requires only a few seconds for a stable fixation 

between DNA/RNA and the membran. This method avoids a 

loss of samples through later hybridisation. The signal 

intensity is manifold increased (5 - 10 times) compared to the 

traditional and time consuming baking method (two hours at 

80°C ). The BIO-LINK is equipped with five tubes of 8 Watt 

and also available in 312 nm and 365 nm. The big volume 

chamber ( 14,5 x 33,0 x 26 cm HxDxW) offers space for 

bigger tubes and plates. 

UV-Energy supply can be stted precise. BIO-LINK is 

equipped with an UV energy programming system with a 

time integrator, which constantly monitors the UV-light 

emission. 

further technical details: 


max UV-exposition in two ranges:0 - 9,999 joules and 0- 

99,99 joules 





dimensions:30,5 x 36 x 35 cm (HxDxW), weight 10,5 kg 

in addition to the crosslinking of nucleic acids BIO-LINK can 

be used for: 


partial restriction endonuclease digestion by formation of 

thymine dimers 




BLX-254 BIO-LINK 254 nm 1.075,00 

BLX-312 BIO-LINK 312 nm 1.075,00 

BLX-365 BIO-LINK 365 nm 1.075,00 




Membrane of 100% pure nitrocellulose for transfer of proteins 

and nucleic acids. It shows high binding capacity (80 - 100 µg / 

cm2) and a low background. Pore size 0,45 µm is used for 

standard applications. The 0,2 µm pore size is recommended 

for transfer of low molecular weight proteins (< 20 kDa) and 

nucleic acids to avoid loss of sample during transfer. 


MNC-0.2 

MNC-0.4 

Nitrocellulose-Membran 

0,2µ 

Nitrocellulose-Membran 

0,45µ 

33 x 300 cm 1 Roll 169,00 

33 x 300 cm 1 Roll 169,00 

MBP-0.17 Blotting-Paper 0,17 mm 46 x 57 cm 100 sheets 99,00 

MNC-0.34 Blotting-Paper 0,34 mm 46 x 57 cm 100 sheets 149,00 

DiscoverSlip for 45 µl sample volume only 

Premium Cover Slip for standard slides 75 x 25 mm 

40 x 20 mm reaction-chamber with 45 µl reactionvolume 

self sealing - no use of glues 

simple and fast positioning on the slide 

simple remove after the reaction - no break of the 

cover slip 

production of a homogenous fluid-film on the slide 

without bubbles 

economic - up to 10 times reusable 

ideal for microarray hybridisations and cellapplications 

( in situ hybridisation, 

immunohistochemistry) 


GK300 DiscoverSlip set of 4 slips 48,00 

GK130 

PALMhyb 

PALMhyb (Processing 

system for discover 

slips) 

file:///F|/Kisker/Kisker/dna_d.htm (5 von 14) [08.12.2005 22:32:26] 

1 System 950,00


Processing system for the use of DiscoverSlips 

accepts up to 4 slides or microarrays 

outside dimensions in SBS-microtestplates-format 

ideal in combination with ThermoSTAR 100 and 

ThermoTWISTER comfort, description see chapters below. 


GK130 

GK140 

GK145 

PALMhyb (Prozessierungsinstrument für 

discover slips) 

PALMhyb plus (PALMhyb + 

ThermoSTAR 100 


ThermoTWISTER comfort) 

QI Incubation and Hybridization Chamber 

1 System 950,00 

The LHC-1 Hybridization-, Immobilization- and Incubation 

chamber is an universal tool for applications in molecular 

and cell biology. The inside microplate format allows 

processing (with adapter) on microarrays, slides or three 

microplates. The chamber is designed for biochemical 

reactions DNA, protein and microarrays. LHC-1 can be used 

with common microtest-plate shakers. It tolerates external 

temperatures of 120°C. 

Further Features: 

parallel processing of 12 microarrays or slides or 3 

microplates 

easy to open magnetic mechanism, opening direct after 

heating possible 



made of chemical resistant materiales 

compatible to &Quot;Geneframes&Quot;, 

&Quot;LifterSlips&Quot; and &Quot;Hybriwells&Quot; 

Specificationes: outer dimensions 140x103x53 mm, inside 

confirming ANSI/SBS 1-2004 Format 

slide dimensions:supports multiple platforms (1&Quot; - 

3&Quot;), length 74-77 mm, width 25,0-25,5 mm, hight 0,7- 


1 System 1.950,00 

1 System 2.800,00


2,0 mm 


LHC-1 Incubatiochamber 1 390,00 

LHC-1/AO Adapter for 4 Objektträger 3 120,00 

LHC-1-S 

Incubation system LHC-1-S (HC1 + 

Variomag Teleshake) 

QI Hybridization Chamber 

The hybridization chamber LHC-4 is an exchangeable 

thermoblock for microarrays with 1 up to 4 slides.It is 

designed for biochemical reactions with DNA, protein and 

cell slides or microarrays and can be used with a commercial 

thermomixer or heater. An easy magnetic clamp mechanism 

for fixing the slides provides a high level of spatial and 

temporal temperature stability during hybridization. The slide 

thickness is changeable between 0,7 to 2,0 mm, whereas 

the height slide body is changeable up to 15 mm (optimized 

for cellbiology). Shaking and direct, active heating of the 

hybridization chamber lead to an increased signal intensity 

and an improved signal-to-background ratio with very good 

reproducibility. 

further features: 

ANSI/SBS 1-2004 format 

compatible to "Geneframes", "LifterSlips" and "Hybriwells" 

water reservoir pads provide high humidity and prevent 

samples from drying out 



made of chemical resistant materiales. 

slide dimensions:supports multiple platforms (1" - 3"), length 

74,0-76,5 mm, width 25-26 mm, hight 0-15 mm 

Temperature range ambient: 100°C max. 

1 1.385,00 


LHC-4 Hybridization chamber 1 450,00 

LHC-4-S 

Hybridization system HC4-S 

(LHC-4 + Heating Block 


QI Hybridization System HC4plus 


1 1.050,00


Hybridization chamber LHC-4 in combination with Thermostat 


Progammable cooling and heating in temperature range from -5° to 

+100°C 

High accuracy of the hybridization-parameter through long time 

Multifunctionality through a number of blocks available for tubes, 

microtestplates and bottles 


LHC-4P 

Hybridization system HC4-Plus (LHC-4 + 

Heating Block Thermostat HBT-100) 

1 1.350,00 


LHC-40K Block for 40 tubes á 0,5ml 1 150,00 

LHC-MTP Block for 96-well microtestplate 1 200,00 

QI Hybridization System HC4professional 

Hybridization chamber LHC-4 in combination with shaker 

ThermoTWISTER comfort 

Progammable cooling and heating in temperature range from -5° to 

+100°C 

progammable shaking speed from 200 - 1.000 rpm, 2 mm amplitude 

higher signal intensities, improved signal-noise relationships with 

higher reproducibility 

multifunctionality by a number of blocks available for tubes, 

microtestplates and bottles 


LHC-4C 

Hybridization system HC4-Professional (LHC- 

4 + ThermoTWISTER comfort) 

1 2.100,00 


LHC-30K Block for 30 Tubes á 1,5ml 1 150,00 

LHC-384 Block for 384-well Microtestplate 1 200,00 

UV - Transilluminators 



homogenus lightning by 8 

or. 12 Tubes (depending 

on model), long tube 

shelflife through integrated 

cooling fun, electronical 

start, models with stepless 

choosable intensity of the 

tubes (70-100%), UVprotection 

shield (optional) 

usable angel 0-90°, high 

quality construction in 

compact design, 

The listed Illuminators are 

useful for following dyes: 

254 nm Hoechst Blue, Radiant Red, Chemiefluoreszenz 

312 nm Ethidiumbromid, SYBR Orange, Fluorescein,Texas Red, SYBR Red 

365 nm SYBR Green, GFP, CHO, Hoechst 33258,Fluorescamine, EBFP 

Bluelight 

Gel Star, SYBR Green, SBBR Gold, AttoPhos,PicoGreen, NBD, 

Acridine Orange, EGFP 

Whitelight Coomassie Blue, Silver Stain, Film Imaging 

accessories: UV-protection shield, replacement tubes and glases, UV-protection glas and face 

shield 

Transilluminators 

Cat.# wavelenght 

number tubes x 

Watt 

filter size intensity control Euro 

UVT-20S 254 8 x 8 20x20 no 755,00 

UVT-20M 312 8 x 8 20x20 no 755,00 

UVT-20L 365 8 x 8 20x20 no 755,00 

UVT-30S 254 12 x 8 23x30 no 955,00 

UVT-30M 312 12 x 8 23x30 no 955,00 

UVT-30L 365 12 x 8 23x30 no 955,00 

UVT-40S 254 6 x 15 20x40 no 1.295,00 

UVT-40M 312 6 x 15 20x40 no 1.295,00 

UVT-40L 365 6 x 15 20x40 no 1.295,00 

UVT-20S-V 254 8 x 8 20x20 10-100% 945,00 



UVT-20M-V 312 8 x 8 20x20 10-100% 945,00 

UVT-20L-V 365 8 x 8 20x20 10-100% 945,00 

UVT-30S-V 254 12 x 8 23x30 10-100% 1.155,00 

UVT-30M-V 312 12 x 8 23x30 10-100% 1.155,00 

UVT-30L-V 365 12 x 8 23x30 10-100% 1.155,00 

UVT-40S-V 254 6 x 15 20x40 10-100% 1.495,00 

UVT-40M-V 312 6 x 15 20x40 10-100% 1.495,00 

UVT-40L-V 365 6 x 15 20x40 10-100% 1.495,00 

UVT-20S/M 254/312 4 x 8 / 4 x 8 20x20 no 865,00 

UVT-20S/L 254/365 4 x 8 / 4 x 8 20x20 no 865,00 

UVT-20M/L 312/365 4 x 8 / 4 x 8 20x20 no 865,00 

UVT-30S/M 254/312 6 x 8 / 6 x 8 23x30 no 1.095,00 

UVT-30S/L 254/365 6 x 8 / 6 x 8 23x30 no 1.095,00 

UVT-30M/L 312/365 6 x 8 / 6 x 8 23x30 no 1.095,00 

UVT-40S/M 254/312 3x15 / 3 x15 20x40 no 1.480,00 

UVT-40S/L 254/365 3x15 / 3 x15 20x40 no 1.480,00 

UVT-40M/L 312/365 3x15 / 3 x15 20x40 no 1.480,00 





accessories 


UVT-UVS UV-protectionshield 37,50 

UVB-mB UV-glas with ear piece 29,00 

UVB-mG UV-glas with rubber band 29,95 

UV-VG UV-face shield 67,90 

UV-Lamps 



We offer with this productline UV-lamps in different 

wavelengths. The well designed lamps are easy to handle 

and reliable. 

A special cost efective product are the lamps in combination 

of two different wavelengths. 

UV-lamps are recommended to use according to the 

wavelengths in following application areas 

254 nm: Elimination of PCR-contaminations, fluorochemistry, 

pesticide analysis, mutation studies, mykology,toxikology, 

mineralogy, polymer curing and control in industry 

The high intensity lamp UVL-100 is supplied with a separate 

power supply and is especialy used for mutation studies and 

polymer curing. 

312 nm: DNA and RNA-electrophoresis, recognition of lanes 

in the gel. 

365 nm: cultivation of fungi, identification of bacteria, 

fluorochemistry, pesticide analysis, quality controle, food 

contamination, archeology and mineralogy. 

The price for 6 Watt und 1 x 15 Watt-Lamps includes a stand 

for the lamps. 

Cat# Wavelength 

Number of 

Tubes x 

Watt 

Dimensionen 

BxTxH 

µW/CM Euro 

UVL-6LS 365/254 2 x 6 276 x 85 x 60 cm 610/400 357,00 

UVT-6LM 365/312 2 x 6 276 x 85 x 60 cm 610/580 357,00 

UVT-6MS 312/254 2 x 6 276 x 85 x 60 cm 580/400 357,00 

UVL-115S 254 1 x 15 505 x 140 x 117 cm 1.780 490,00 

UVL- 

115M 

312 1 x 15 505 x 140 x 117 cm 3.000 490,00 

UVL-115L 365 1 x 15 505 x 140 x 117 cm 2.300 395,00 

UVL-215S 254 2 x 15 505 x 140 x 117 cm 1.780 675,00 

UVL- 

215M 

312 2 x 15 505 x 140 x 117 cm 3.000 675,00 

UVL-215L 365 2 x 15 505 x 140 x 117 cm 2.300 469,00 

UVL- 

215LS 

365/254 2 x 15 505 x 140 x 117 cm 1.350/930 675,00 



UVL- 

215LM 

UVL- 

215MS 

365/312 2 x 15 505 x 140 x 117 cm 1.350/1.800 675,00 

312/254 2 x 15 505 x 140 x 117 cm 1.800/930 469,00 

UVL-100 254 1 x 100 404 x 98 x 97 3.400 945,00 

Hybridisation ofen 

Hybridisation ovens are fast becoming the preferred 

method of hybridization technique in today´s 

laboratory. The ovens have virtually replaced plastic 

bags and shaking water baths because of the 

added safety and convenience they provide. 

Incubations take place inside the ovens under 

constant rotation, thereby providing even 

distribution of probe solution over the membrane. 

Our hybridisation oven offers high performance with 

precise temperature control. The narrow frontal 

profile provides the additional advantage of 

conserving precious benchtop space. 

The hybridisation ofen offers exeptionally high 

performance. You dońt have to wait longer twenty 

to forty minutes to reach target temperatures. The 

hybridisation ofen heats from ambient to 65°C in 

only 7 minutes. Our unique fan-assisted airflow 

system circulates air evenly and continously, 

delivering excellent temperature uniformity 

throughout the oven chamber. The digital set/digital 

read P.I.D. microprocessor temperature controller 

maximizes rapid heat-up of the oven. An over 

temperature safety (OTP) is automatically set by the 

microprocessor at 3.0°C obove setpoint. In the 

unlikely event of a microprocessor failure, a thermal 

cutoff will shut off the power to the heating 

elements. 


Rotator-capacity 

6 x 300 x 35mm or 

12 x 150 x 35mm 

tubes 

or 6 x 300 x 50mm 

or 3 x 300 x 70mm 

or Shaker function Rocking platform 

Rotating speed 5 r.p.m. at 220Volt 



Temperature range 

Heating power 400 Watt 

ambient +5°C up to 

90°C 

Heating speed 65°C in 7 minutes 

Temperature precision +/- 0,2°C 

Temperatuer display 3-point LED-display 

Timer 

OTP 

Dimensions: inside 

outside 

weight 15 Kg 

9 h, 59 min. or 

continously 

automatic at 3°C 

over set point 

350 x 195 x 200mm 

w x h x d 

425 x 380 x 250mm 

w x h x d 

Cat. # description Euro 

L017 Hybridisation ofen 1.598,00 

L017-F3 

L017-F6 

L017-F6/12 

rotisserie f. 3 tubes 

300 x 70mm 


300 x 50mm 


300 x 35mm 

or f.12 tubes 150 x 

35mm 

249,80 

249,80 

249,80 

L017-SP rocking platform 249,80 

L017-1535 tube 150 x 35mm 34,90 

L017-3035 tube 300 x 35mm 49,90 

L017-3050 tube 300 x 50mm 64,90 

L017-3070 tube 300 x 70mm 74,90 

Hybridisation/Waterbath Combi for Molecularbiology 



This combination waterbath and 3-D shaker offers many applications in 

molecularbiology, like hybridisations, washes, cooling and maintaining of 

melted agar, denaturations etc. The microprocessor controlled bath has a 

temperature range from 5°C over ambient to 100°C, the bath opening is 

270 x 245 mm, the bathdepth 50mm. 

the weight is 5,5kg, dimensions are: 300x300x200mm. 

The waterbath is placed on a 3-D shaker with variable speed of 10-100 

r.p.m. 


L0048 Hybridisationwaterbath Combi 1.459,00 

L0049 Hybridisationwaterbath 475,00 

L050 3D-shaker, 10 kg loading capacity 995,00 






P.O. Box 1329 


Germany 



Arbeiten mit PCR und anderen molekularbiologischen 

Techniken erfordert in vielen Fällen einen 

kontaminationsfreien Arbeitsplatz. Die über eine 

Zeitschaltuhr (0-24 Std) gesteuerte UV-Quelle denaturiert 

unerwünschte DNA an Reagenzien sowie Pipettier-und 

Laborhilfen in 5 - 30 Minuten. Die 10 mm starken 

Acrylwände bzw. 8-10 mm Glaswände sorgen zudem für 

sicheren Schutz vor UV- und Isotopenstrahlung wie z.B. 

32P. Das UV-Kabinett (Maße: 69 x 51 x 57 cm BxTxH, 

Gewicht 25 kg) hat eine leicht zu reinigende Arbeitsfläche 

aus Edelstahl und steht in verschiedenen Versionen zur 

Verfügung. So kann auch während des Arbeitsvorganges 

duch den Einsatz des UV/Air-Cleaner Kontaminationsfreiheit 

garantiert werden. Hierbei wird die Luft kontinuierlich mit 

einem Umwälzvolumen von 25m3/Std direkt an einer 

abgedeckten 254 nm UV-Lampe vorbeigeführt. In den 

Arbeitspausen kann zusätzlich die direkt strahlende UV- 

Lampe zur Dekontamination von Arbeitsfläche und 

Hilfsmitteln eingesetzt werden. 

Versionen: 

L020: Acrylwände, Unterteil der Frontscheibe hochklappbar, 

2 x UV 254 nm 15 Watt, 1 x Weißlicht 

L020-C: Acrylwände, Unterteil der Frontscheibe 

hochklappbar, 1 x UV 254 nm 15 Watt, 1 x Weißlicht, 1 x 

UV/Air-Cleaner 254 nm 

L020S:Acrylwände, Seitenflügelöffnungen, 2 x UV 254 nm 

15 Watt, 1 x Weißlicht 

L020-G: alle Seitenteile aus Glas, daher kein Acrylbruch 

durch UV-Licht, keine Einschränkung beim Einsatz von 

Reinigungsmitteln, Unterteil der Frontscheibe hochklappbar, 

2 x UV 254 nm 15 Watt, 1 x Weißlicht 

L020-GC: alle Seitenteile aus Glas, daher kein Acrylbruch 

durch UV-Licht, keine Einschränkung beim Einsatz von 

Reinigungsmitteln, Unterteil der Frontscheibe hochklappbar, 

file:///F|/Kisker/Kisker/deutsch/dna_d.htm (1 von 15) [08.12.2005 22:32:28] 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 



1 x UV 254 nm 15 Watt, 1 x Weißlicht, 1 x UV/Air-Cleaner 

254 nm 


L020 DNA-Workstation, Acryl 220Volt/50Hz 1.299,00 

L020-C 

L020-S 

Workstation,Acryl mit UV/Air 

Cleaner 

Workstation Acryl mit 2 

Seitenöffnungen 

220Volt/50Hz 1.459,00 

220Volt/50Hz 1.499,00 


L020-GC 

Workstation, Glas mit UV/Air 

Cleaner 

220Volt/50Hz 1.750,00 

UV-Cleaner, eine neue Kombination von Laminar Flow und UV-Licht für 

Reinräume 

Diese neuartigen Produkte gewährleisten DNA sichere Laborräume ohne 

direkte UV-Bestrahlung. Die Umgebungsluft zirkuliert kontinuierlich mittels eines 

Ventilators durch das Gerät, welches mit einer Hochenergie UV-Lampe und 

einem Staubfilter ausgerüstet ist. Innerhalb der UV-Box ist die Intensität des UV- 

Lichtes 1000 fach verstärkt und somit ausreichend, um DNA komplett zu 

inaktivieren. Auch mikrobiologische Kontaminationen werden stark reduziert. 

Der UV-Cleaner hat eine Durchströmungskapazitä von 25 m3 Luft / Stunde, um 

in Laborräumen von circa 25 m2 innerhalb von 3 Stunden DNA zu inaktivieren. 

Weitere Vorteile: Kein Wechsel von Hepa-Filtern, Ozonfreie hoch- intensive UV 

Dekontamination, geräuscharm, niedriger Energieverbrauch, lange 

Lebensdauer der UV-Lampe (8.000 Stunden), kompaktes Gerät für 

Wandmontage. 

Das Gerät wird empfohlen für den Einsatz in Reinräumen wie PCR, DNA- 

Analyse, Mikrobiologie, Virologie, Zellkultur oder anderen Räumen, wo 

kontaminationsfreie Umgebung benötigt wird. Nach 12 stündigem Einsatz 

reduziert der UV-Cleaner schätzungsweise die CFU ( colony forming unit ) auf 

80 - 100 CFU/m3 Luft. Keimzahlbestimmungen in einem Operationssaal 

ergaben einen Anstieg der CFU während einer Operation auf 500-600 CFU 

ohne UV-Cleaner, unter dem Einsatz des UV-Cleaners reduzierte sich die 

Keimzahl auf einen Wert von 80-100 CFU/ m3 

L046-M: Gewicht: 3,7kg, Anschluss 220/240 V0lt, 50/60Hz 30 Watt 

Kat. # Bezeichnung Kapaztität/Std Euro 

L046-M UV-Cleaner medium 25m3 399,00 


file:///F|/Kisker/Kisker/deutsch/dna_d.htm (2 von 15) [08.12.2005 22:32:28]


Dieser kontaminationsfreie kompakte 

Arbeitsplatz ist geeignet für alle Arbeiten mit 

DNA und PCR- Vorbereitungen zur 

Vermeidung von Kreuzkontaminationen. Das 

Gerät ist ausgestattet mit einer 254 nm UV- 

Lampe über der Arbeitsfläche, herausziehbarer 

Filterkassette, Betriebs-stundenzähler für den 

HEPA - Aktivkohlefilter und UV-Anzeiger. Der 

Luftstrom ist von 0 -100% regelbar. Die 

Arbeitsplatte, die von einer Plexiglashaube 

überdeckt wird, ist aus leicht zu reinigendem 

Edelstahl. Das Gerät ist in drei Hauben- 

Versionen lieferbar. Die Hauben der Standard- 

und Sydney-Version können mittels 

Stellschrauben 100mm vor- bzw. zurückgestellt 

werden. Die USA-Version ist mittels 

Schiebefenster vollständig verschließbar. 

Spezifikation: Anschlusswerte: 

220Volt/50Hz/80Watt Abmessung 

Arbeitsfläche: 470 x 300mm Lüftungsfläche: 

410 x 240mm Aussenmaße Standard: 485 x 

540 x 250mm (BxTxH) Sydney-Version: 485 x 

540 x 465mm (BxTxH) USA-Version: 485 x 540 

x 600mm (BxTxH) 





L016-AF HEPA Aktivkohlefilter 40,90 

L016- UV UV-Lampe 45,00 




BIO-LINK 254 nm bietet eine schnelle und zuverlässige 

Methode, um DNA oder RNA auf Nylon- und 

Nitrocellulosemembranen zu fixieren. Die Methode führt 

innerhalb von Sekunden zu einer stabilen Verbindung 

zwischen DNA/RNA und der Membran. Dadurch wird ein 

möglicher Probenverlust beim nachfolgenden Hybridisieren 

vermieden, und die Signalstärke gegenüber der 

herkömmlichen langwierigen thermischen Methode (zwei 

Stunden "Backen" bei 80°C )wesentlich erhöht ( 5 - 10-fach). 

Das Gerät ist mit fünf Röhren á 8 Watt ausgestattet und steht 

zusätzlich in den Wellenlängen 312 und 365 nm zur 

Verfügung. Die grosse Kammer ( 14,5 x 33,0 x 26 cm 

HxTxW) bietet Platz für sperrige Teile. 

Die UV-Dosis kann präzise eingestellt werden. 

weitere technische Daten: 

9 voreingestellte Energie-/Zeitprogramme oder manuelle 

Konfiguration 

maximal UV-Exposition, gemessen in zwei Bereichen:0 - 

9,999 Joule und 0-99,99 Joule 

hohe Reproduzierbarkeit durch UV-Sensor 

grosses, einfach zu bedienendes Keybord mit LED-Anzeige 

Abmessungen:30,5 x 36 x 35 cm (HxTxB), Gewicht 10,5 kg 

zusätzlich zum Verlinken der Nukleinsäuren ist BIO-LINK für 

folgende Anwendungen geeignet: 

"Nicking" von DNA in Agarose-Gelen 

teilweiser Restriktionsverdau 

Rec-A Mutations-Screening 

Ausschaltung von PCR-Kontaminationen 


BLX-254 BIO-LINK 254 nm 1.075,00 

BLX-312 BIO-LINK 312 nm 1.075,00 

BLX-365 BIO-LINK 365 nm 1.075,00 

Nitrocellulose-Membranen und Blottingpapiere 



Membran aus 100% reiner Nitrocellulose für den Protein- und 

Nukleinsäuretransfer, die sich durch eine hohe 

Bindungskapazität von 80 - 100 µg / cm2 und einen geringen 

Hintergrund auszeichnet. 

Für Standardanwendungen wird die Porengröße 0,45 µm, für 

Proteine mit geringem Molekulargewicht (< 20 kDa) und 

Nukleinsäuren wird die Porengröße 0,2 µm empfohlen, um 

einen Verlust der Proben beim Transferieren zu vermeiden 

Kat. # Beschreibung Abmessungen Pack.einheit Euro 



MBP-0.17 Blotting-Papier 0,17 mm 46 x 57 cm 100 Bögen 99,00 

MNC-0.34 Blotting-Papier 0,34 mm 46 x 57 cm 100 Bögen 149,00 

DiscoverSlip für nur 45 µl Probenvolumen 

Premium Cover Slip für Standard Objektträger 75 x 

25 mm 

40 x 20 mm Reaktionskammer mit 45 µl 

Reaktionsvolumen 

selbst abdichtend - kein Verwendung von 

Klebstoffen 

einfache und schnelle Positionierung auf dem 

Glasobjektträger 

einfaches Entfernen nach der Reaktion - kein 

Brechen des Deckgläschens 

generiert einen homogenen Flüssigkeitsfilm auf 

dem Objektträger ohne Luftblasen 

kostengünstig - bis zu 10 mal wieder verwendbar 

ideal für Microarray Hybridisierungen und 

Zellanwendungen ( in situ Hybridisierung, 

Immunohistochemie) 


GK300 DiscoverSlip 4 Stück 48,00 

GK130 

PALMhyb 

PALMhyb 

(Prozessierungsinstrument 

für discover slips) 

1 System 950,00 



Prozessierungsinstrument für den Einsatz von DiscoverSlips 

Aufnahme von bis zu 4 Objektträgern oder Microarrays 

Außenabmaß im SBS-Mikrotiterplatten-Format 

ideal in Kombination mit ThermoSTAR 100 und 

ThermoTWISTER comfort, Beschreibung siehe weiter unten. 


GK130 

GK140 

GK145 

PALMhyb (Prozessierungsinstrument 

für discover slips) 




ThermoTWISTER comfort) 

QI Inkubations- und Hybridisierungskammer 

1 System 950,00 

1 System 1.950,00 

1 System 2.800,00 

Die LHC-1 Hybridisierungs-, Immobilisierungs- und 

Inkubationskammer zeichnet sich durch Ihre vielfältigen 

Einsatzmöglichkeiten für molekularbiologische 

Anwendungen aus. Durch die Innenraumausbildung im 

Mikrotiterplatten-Format ist es aufgrund adaptiver Elemente 

möglich, Prozesse auf Microarrays, Objektträgern, 

Mikrotestplatten und Tubes durchzuführen. Die Kammer 

kann auf handelsüblichem Laborequipment für 

Mikrotestplatten fixiert und geschüttelt werden. Der 

Durchmischungseffekt bewirkt weitaus präzisere Ergebnisse, 

wie bei Microarray-Routinen messbar. Eine externe 

Temperierung kann in einem Thermoschrank bis 120°C 

erfolgen. 


gleichzeitige Prozessierung von bis zu 12 Microarrays oder 

Objektträgern oder drei Mikrotestplatten 

Magnetmechanismus zum unkomplizierten Öffnen auch 

direkt nach der Temperierung 

magnetische Füsse für sicheren Stand 

Licht-undurchlässiger Deckel für Licht-sensible Reaktionen 

Verwendung chemisch resistenter Materialien. 

Spezifikationen: Abmessungen 140x103x53 mm, Inneraum 



ANSI/SBS 1-2004 Format 

Objektträgerabmessungen:für verschiedene Plattformen (1" - 

3") geeignet, Länge 74-77 mm, Breite 25,0-25,5 mm, Höhe 

0,7-2,0 mm. 



LHC- 

1/AO 

LHC-1- 

S 

Adapter für 4 Objektträger 3 120,00 

Inkubationssystem LHC-1-S (HC1 

+ Variomag Teleshake) 

QI Hybridisierungskammer 

1 1.385,00 

Die Hybridisierungskammer LHC-4 für 1 bis 4 Objektträger, 

Mikroarrays oder Zell-Slides zeichnet sich durch eine 

effektive Temperierung während der Hybridisierung mittels 

herkömmlicher Thermoschüttler mit Adaption für 

Mikrotiterplatten (auch für Hybridisierungsöfen und 

Wasserbäder geeignet) aus. 

Ein magnetischer Anpressmechanismus verhindert bei 

Nutzung entsprechender Thermoschüttler Wärmebrücken 

zwischen dem Kammerboden und dem Thermoschüttler. Die 

1 bis 4 Objektträger werden durch einen Kugelmagnet- 

Mechanismus am Kammerboden fest geklemmt, wodurch 

ebenfalls Wärmebrücken verhindert werden. Durch dieses 

Prinzip können Slides mit einer Dicke zwischen 0,7 und 2,0 

mm genutzt werden, wobei der Aufbau der Objektträger eine 

Höhe von bis zu 15, 0 mm aufweisen kann (optimal für die 

Zellbiologie). 

Durch die Schüttelbewegung und eine aktive, direkte 

Temperierung der Hybridisierungskammer können bei 

Hybridisierungsexperimenten eine erhöhte 

Reproduzierbarkeit, eine erhöhte Signalintensität sowie ein 

niedrigeres Hindergrundrauschen erreicht werden. 


SBS-Format 

Objektträger: Länge 74,0-76,5 mm, Breite 25-26 mm, Höhe 

0-15 mm 

Temperierbereich: Raumtemperatur bis 100°C 





LHC-4- 

S 

Hybridisierungssystem HC4-S 

(LHC-4 + Heating Block Thermostat 

HBT-100) 

QI Hybridisierungssystem HC4plus 

1 1.050,00 

Hybridisierungskammer LHC-4 in Kombination mit dem Thermostat 


Progammierbares Kühlen und Heizen im Temperaturbereich 

zwischen -5° und +100°C 

Hohe Genauigkeit der Hybridisierungsparameter über einen langen 

Zeitraum 

Multifunktionalität durch eine Vielzahl an Blöcken für Tubes, 

Mikrotiterplatten und Flaschen 


LHC-4P 

Hybridisierungssystem HC4-Plus (LHC-4 + 

Heating Block Thermostat HBT-100) 

1 1.350,00 



LHC-MTP Block für 96-well Mikrotiterplatte 1 200,00 

QI Hybridisierungssystem HC4professional 

Hybridisierungskammer LHC-4 in Kombination mit dem Schüttler 

ThermoTWISTER comfort 

Progammierbares Kühlen und Heizen im Temperaturbereich 

zwischen -5° und +100°C 

Progammierbare Schüttelfrequenzen von 200 - 1.000 rpm, 2 mm 

Amplitude 

Erhöhte Signalintensitäten, verbesserte Signal-Rauschverhältnisse 

mit höherer Reprodizierbarkeit 

Multifunktionalität durch eine Vielzahl an Blöcken für Tubes, 

Mikrotiterplatten und Flaschen 


LHC-4C 

Hybridisierungssystem HC4-Professional 

(LHC-4 + ThermoTWISTER comfort) 


1 2.100,00




LHC-384 Block für 384-well Mikrotiterplatte 1 200,00 

UV - Transilluminatoren 

homogene Ausleuchtung durch 8 

bzw. 12 Röhren (je nach Version), 

geringere Röhrenalterung durch 

integriertes Kühlgebläse, 

verbesserte Starteigenschaften und 

längere Lebensdauer der Röhren 

durch elektronische Ansteuerrung, 

Version mit stufenlos regelbarer 

Intensität der Röhren (10-100%), 

UV-Schutzschild (optional), Stellung 

des UV-Schildes ist im Winkel von 0- 

90° arretierbar, hochqualitative 

Konstruktion im kompakten Design, 

leichte Umrüstung auf andere 

Wellenlängen bzw. Applikationen, 

Die aufgelisteten UV - 

Transilluminatoren sind unter 

anderem zum Anregen der 

folgenden Farbstoffe geeignet: 

Ausführung 254 nm Hoechst Blue, Radiant Red, Chemiefluoreszenz 

Ausführung 312 nm 

Ausführung 365 nm 

Ausführung Blaulicht 

Ethidiumbromid, SYBR Orange, Fluorescein,Texas Red, 

SYBR Red 

SYBR Green, GFP, CHO, Hoechst 33258,Fluorescamine, 

EBFP 

Gel Star, SYBR Green, SBBR Gold, AttoPhos,PicoGreen, 

NBD, Acridine Orange, EGFP 

Ausführung Weisslicht Coomassie Blue, Silver Stain, Film Imaging 

Zubehör: UV-Schutzabdeckung, Ersatzröhren und Ersatzfiltergläser, UV- 

Schutzbrille,Transverterplatte (wandelt UV-Licht in Weißlicht) 

Transilluminatoren 


Anzahl 

Röhren x 

Watt 

Filtergrösse cm 

Intensitätsregelung 

Euro 

UVT-20S 254 8 x 8 20x20 nein 755,00 



UVT-20M 312 8 x 8 20x20 nein 755,00 

UVT-20L 365 8 x 8 20x20 nein 755,00 

UVT-30S 254 12 x 8 23x30 nein 955,00 

UVT-30M 312 12 x 8 23x30 nein 955,00 

UVT-30L 365 12 x 8 23x30 nein 955,00 

UVT-40S 254 6 x 15 20x40 nein 1.295,00 

UVT-40M 312 6 x 15 20x40 nein 1.295,00 

UVT-40L 365 6 x 15 20x40 nein 1.295,00 

UVT-20S- 

V 

UVT-20M- 

V 

UVT-20L- 

V 

UVT-30S- 

V 

UVT-30M- 

V 

UVT-30L- 

V 

UVT-40S- 

V 

UVT-40M- 

V 

UVT-40L- 

V 

UVT- 

20S/M 

UVT- 

20S/L 

UVT- 

20M/L 

UVT- 

30S/M 

254 8 x 8 20x20 10-100% 945,00 

312 8 x 8 20x20 10-100% 945,00 

365 8 x 8 20x20 10-100% 945,00 

254 12 x 8 23x30 10-100% 1.155,00 

312 12 x 8 23x30 10-100% 1.155,00 

365 12 x 8 23x30 10-100% 1.155,00 

254 6 x 15 20x40 10-100% 1.495,00 

312 6 x 15 20x40 10-100% 1.495,00 

365 6 x 15 20x40 10-100% 1.495,00 

254/312 4 x 8 / 4 x 8 20x20 nein 865,00 

254/365 4 x 8 / 4 x 8 20x20 nein 865,00 

312/365 4 x 8 / 4 x 8 20x20 nein 865,00 

254/312 6 x 8 / 6 x 8 23x30 nein 1.095,00 



UVT- 

30S/L 

UVT- 

30M/L 

UVT- 

40S/M 

UVT- 

40S/L 

UVT- 

40M/L 

254/365 6 x 8 / 6 x 8 23x30 nein 1.095,00 

312/365 6 x 8 / 6 x 8 23x30 nein 1.095,00 

254/312 

254/365 

312/365 

3x15 / 3 

x15 

3x15 / 3 

x15 

3x15 / 3 

x15 

20x40 nein 1.480,00 

20x40 nein 1.480,00 

20x40 nein 1.480,00 





Zubehör 

Kat# Bezeichnung Euro 

UVT-UVS UV-Schutzschild 37,50 

UVB-mB UV-Brille mit Bügel 29,00 

UVB-mG UV-Brille mit Gummiband 29,95 

UV-VG UV-Vollgesichtsschutz 67,90 

UV-Handlampen 

Mit dieser Produktlinie bieten wir UV-Handlampen in 

verschieden Wellenlängen und Strahlungsintensitäten an. 

Die Lampen zeichnen sich durch ein anwenderfreundliches 

Design und Zuverlässigkeit aus. 

Ein besonders kostengünstiges Produkt sind die auf zwei 

Wellenlängen umschaltbare UV-Lampen. 

Entsprechend Ihrer Wellenlängen werden die UV-Lampen u. 

a. in folgenden Anwendungsgebieten eingesetzt 

254 nm: Bestrahlung von PCR-Arbeitsplätzen, 

Fluorochemie, Pestizidanalyse, Mutationsstudien, 

Mykologie,Toxikologie, Mineralogie, Polymerisation 

Die Hochenergielampe UVL-100 wird mit separatem Netzteil 

geliefert und wird insbesondere für Mutagenesestudien und 

Polymersiationen eingestzt. 



312 nm: DNA und RNA-Elektrophoresetechniken, 

Erkennung von Banden im Gel. 

365 nm: Pilzkultivierung, Bakterienidentifikation, 

Fluorochemie, Pestizidanalyse, Qualitätskontrolle, 

Lebensmittelkontaminationen, Archeologie und Mineralogie. 

Der Preis für die 6 und 1 x 15 Watt-Lampen beinhaltet eine 

zweckmässige Standhalterung. 

Kat# 

Wellenlänge 

nm 

Anzahl 

Röhren x 

Watt 

Abmessungen µW/CM Euro 

UVL-6LS 365/254 2 x 6 276 x 85 x 60 cm 610/400 357,00 

UVT- 

6LM 

UVT- 

6MS 

UVL- 

115S 

UVL- 

115M 

UVL- 

115L 

UVL- 

215S 

UVL- 

215M 

UVL- 

215L 

UVL- 

215LS 

365/312 2 x 6 276 x 85 x 60 cm 610/580 357,00 

312/254 2 x 6 276 x 85 x 60 cm 580/400 357,00 

254 1 x 15 

312 1 x 15 

365 1 x 15 

254 2 x 15 

312 2 x 15 

365 2 x 15 

365/254 2 x 15 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 


1.780 490,00 

3.000 490,00 

2.300 395,00 

1.780 675,00 

3.000 675,00 

2.300 429,00 

1.350/930 675,00


UVL- 

215LM 

UVL- 

215MS 

365/312 2 x 15 

312/254 2 x 15 

505 x 140 x 117 

cm 

505 x 140 x 117 

cm 

1.350/1.800 675,00 

1.800/930 469,00 

UVL-100 254 1 x 100 404 x 98 x 197 3.400 945,00 

Hybridisierungsofen 

Auf Grund der hohen Sicherheitserfordernisse und 

der notwendigen Reproduzierbarkeit der 

Hybridisierungsergebnisse ersetzen 

Hybridisierungsöfen immer öfter die bislang 

favorisierten Wasserbäder und Plastikbeutel. Die 

Hybridisierung läuft im Ofen unter kontrollierten 

Bedingungen bei konstanter Temperatur und 

Rotation bei gleichmäßiger Benetzung der 

Membran ab. Der kompakte Hybridisierungsofen 

wird mit Auffangwanne geliefert und bietet eine 

große Kapazität für 6 x 300mm oder 12 x 150mm 

Flaschen. Die Zieltemperatur von 65°C wird in nur 7 

Minuten erreicht, wobei das einzigartige 

Ventilatorsystem für gleichmäßige Luft- und 

Temperaturverteilung sorgt. Das Mikroprozessor 

gesteuerte Gerät kann ohne Rotator auch als 

Inkubator genutzt werden. Die 

Hybridisierungsflaschen sind aus Borsilikatglas mit 

blauer Schott-Verschlußkappe und Dichtung. 

Rotationsgeschwindigkeit 5 r.p.m 

Temperaturbereich 

Heizleistung 400 Watt 

5°C über 

Raumtemperatur bis 

90°C 

Heizgeschwindigkeit 65°C in 7 Minuten 

Temperaturpräzision +/- 0,2°C 

Temperaturanzeige 3-stellige LED-Anzeige 

Zeitschaltung 

Überhitzungsschutz 

Abmessungen: innen 

9 h, 59 min. oder 

Dauerbetrieb 

automatisch bei 3°C 

über Einstellwert 

350 x 195 x 200mm 

BxHxT 



Außen 

Gewicht 15 Kg 

425 x 380 x 250mm 

BxHxT 

Kat. # Bezeichnung Euro 

L017 Hybridisierungsofen 1.598,00 

L017-F3 

L017-F6 

L017-F6/12 

Rotisserie f. 3 Flaschen 

300 x 70mm 

Rotisserie f. 6 Flaschen 

300 x 50mm 

Roti. f. 6 Fl. 300x35 oder 

12Fl 150x35mm 

249,80 

249,80 

249,80 

L017-SP Schüttelplattform 249,80 

L017-1535 Flasche 150 x 35mm 34,90 

L017-3035 Flasche 300 x 35mm 49,90 

L017-3050 Flasche 300 x 50mm 64,90 

L017-3070 Flasche 300 x 70mm 74,90 

Hybridisierungswasserbad Kombi für die Molekularbiologie 

Diese Kombination aus Wasserbad und 3-D Schüttler bietet vielfältige 

Anwendungsmöglichkeiten in der Molekularbiologie, wie Hybridisieren 

und Waschen, Kühlen und Konservieren von Schmelzagar, 

Denaturierungen etc.Das Mikroprozessor gesteuerte Bad hat einen 

Heizbereich von 5°C über RT bis 100°C, die Badöffnung ist 270 x 245 

mm, die Badtiefe 50mm. Das Gerät wiegt 5,5kg. Aussenmaße: 

300x300x200mm. Das Wasserbad ist auf einem 3-D Schüttler mit 

variabler Geschwindigkeit von 10-100 r.p.m. platziert. 

Kat. # Bezeichnung Preis Euro 

L0048 Hybridisierungwasserbad Kombi 1.459,00 

L0049 Hybridisierungwasserbad 475,00 

L050 3D-Taumelschüttler, 10 kg Tragkraft 995,00 

Gel-Dokumentationssysten GelSystem Flexi 



Das GelSystem Flexi ist ein PC-gesteuertes Gel- 

Dokumentationssystem, das auf einer Digitalkamera basiert. 

Es ist sehr bedienerfreundlich und nutzt alle Vorzüge einer 

Digital-Kamera u.a. hohe Bildauflösung., Bildqualität und 

Steuerung über PC. Es stehen wahlweise 2 Olympus- 

Kameras zur Verfügung, die sich in ihrer Auflösung und 

Empfindlichkeit unterscheiden. Die Steuerung der Kameras 

erfolgt über die PC-Software ImagingControl X1. Neben der 

Kamerasteuerung beinhaltet die ImagingControl X1 auch 

viele Funktionen für die Bildbearbeitung. Zur Verwaltung 

großer Datenmengen nutzt die Software eine integrierte 

Datenbank. Das System beinhaltet neben der 

transportabelen Aufsatzdunkelhaube auch einen UV- 

Transilluminator sowie einen Thermodrucker P-91W. Der 

Drucker benötigt ca. 20 Sekunden für den Ausdruck eines 

Bildes. Das Gelsystem ist optional erweiterbar. 

Technische Daten: 

Kamera Olympus C-4000 Olympus C-750 

Pixel 2288 x 1712 2288 x 1712 

Zoomobjektiv Motor-Zoom F 2,8-11 Motor-Zoom F 2,8-8 

Filter 

1 Filter nach Wahl (EtBr, 

SYBRGreen,) 

Graustufen 8 Bit (256) 8 Bit (256) 

1 Filter nach Wahl (EtBr, 

SYBRGreen,) 

Farben 24 Bit (16,7E6) 24 Bit (16,7E6) 

Max. Integrationszeit 16 s 16 s 

Steuerung/Speicherung PC-Interface (USB) PC-Interface (USB) 

Bestelldaten 

Kat#: Beschreibung Euro 








P.O. Box 1329 


Germany 


Autoradiographie - Röntgenkassetten 

Unsere Riegelschlußkassetten zeichnen sich aus durch: 

höchste Bildgüte durch exakten Film/Folienkontakt 

oberflächenversiegelten PE-Schaumstoff innen 

extreme Langlebigkeit durch kunststoffbeschichtetes 

Aluminium; dauerhaft antistatisch 

lieferbar mit zusätzlicher Vernietung mit garantierter 

Kassetten-Stabilität bis -70°C 

Anfertigungen nach Kundengrößen und Reparaturservice 

geringere Strahlenabsorption als DIN-Maß 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Grösse in cm Kat. # standard Euro Kat.# vernietet Euro 

9 x 12 120001 69,00 -- 

13 x 18 120002 79,25 ZV0002 84,35 

15 x 30 120003 86,90 ZV0003 92,00 

15 x 40 120004 122,20 ZV0004 127,30 

18 x 24 120005 93,00 ZV0005 96,00 

18 x 43 120006 125,25 ZV0006 127,30 

20 x 25 -- ZV0025 117,10 

20 x 40 120007 122,20 ZV0007 127,30 

20 x 60 120008 218,80 ZV0008 229,55 

20 x 80 120009 275,60 ZV0009 280,70 

20 x 96 120010 399,30 ZV0010 408,50 

24 x 30 120012 110,45 ZV0012 117,60 

30 x 40 120014 122,70 ZV0014 132,95 

30 x 60 120015 276,60 ZV0015 296,00 

30 x 80 120016 403,90 ZV0016 416,70 

30 x 90 120017 444,30 ZV0017 449,90 

file:///F|/Kisker/Kisker/deutsch/radio_d.htm (1 von 5) [08.12.2005 22:32:30]


35 x 35 120019 135,50 ZV0019 145,70 

35 x 43 120020 144,70 ZV0020 152,90 

40 x 40 120022 152,90 ZV0022 158,00 

Verstärkerfolien 

Typ Universal – Empfindlichkeit-100, Calciumwolframat, blauemittierend, keine statische 

Aufladung, höchste Widerstandsfähigkeit bei mechanischer Belastung, freie Wahl der 

Standardfilme ohne Änderung der Belichtungsdaten 

Typ Extrarapid - Empfindlichkeit-200, Calciumwolframat, blauemittierend, hohe Verstärkung und 

sehr gute Zeichenschärfe, freie Wahl der Standardfilme, speziell geeignet für 

molekularbiologische Anwendungen 

Grösse Kat.#.Universal Euro Kat. # Extrarapid Euro 

9 x 12 212001 19,95 

13 x 18 212002 31,60 E1318 39,90 

15 x 30 212003 48,90 

15 x 40 212004 67,80 E1540 79,25 

18 x 24 212005 47,90 E1824 55,00 

18 x 43 212006 67,50 E1843 91,90 

20 x 25 61,90 E 2025 79,00 

20 x 40 212007 97,15 E2040 109,90 

20 x 60 212008 193,80 E2060 193,80 

20 x 80 212009 232,60 E2080 232,60 

20 x 96 212010 265,35 

24 x 24 212011 81,30 

24 x 30 212012 71,90 E2430 86,65 

30 x 40 212014 96,70 E3040 138,00 

30 x 60 212015 254,60 

30 x 90 212016 354,80 

35 x 35 212018 142,35 E3535 152,45 

35 x 43 212019 175,95 E3543 185,85 

40 x 40 212021 181,35 E4040 198,40 



Foilienreiniger 

Zur Erhaltung der Antistatik ist es notwendig, die Verstärkerfolien im Abstand von circa 6 Wochen 

zu reinigen 


201001 Reiniger 250 ml 14,85 

201002 Reiniger mit Sprüher 250 ml 19,95 

Filmrahmen 

Filmrahmen aus nichtrostendem, poliertem Stahl, Sondergrößen sind auf 

Anfrage erhältich. Die patentierten Verschlüsse in den Ecken sind so 

konstruiert, daß der Film beim Einspannen nicht gelocht oder verletzt, aber 

trotzdem sehr fest gehalten wird und so bis in die Ecken vollkommen 

austrocknet. 

Alle Rahmen sind mit einem Auflegestab von 46 cm Länge und Gummitüllen 

versehen 

Kat. # Grösse Euro 

FR1318 13 x 18 cm 28,10 

FR1530 15 x 30 cm 28,10 

FR1540 15 x 40 cm 28,10 

FR1824 18 x 24 cm 28,10 

FR1843 18 x 43 cm 40,40 

FR2025 20 x 25 cm 40,40 

FR2040 20 x 40 cm 30,20 

FR3040 30 x 40 cm 30,20 

FR3535 35 x 35 cm 30,20 

FR3543 35 x 43 cm 30,20 

FR4040 40 x 40 cm 30,20 

Fuji Röntgenfilm RX 



Fuji Röngenfilme für die Autoradiographie sind von höchster Qualität 

und geeignet für alle Experimenttypen. Proteine und Nukleinsäuren 

können mit vielen Typen von Radioisotopen markiert werden. 

Der Fuji RX Film ist ein beidseitig beschichteter Röntgenfilm mit 

hohem Kontrast für alle Gebiete der Autoradiographie und hoher 

Empfindlichkeit zur Belichtung mit allen UV/blau emittierenden 

Calciumwolframat- oder Seltenenerden-Verstärkerfolien. 

Packungseinheit 100 Blatt 

Kat. # Grösse in cm Euro 

RX1318 13 x 18 35,30 

RX 1824 18 x 24 60,85 

RX2430 24 x 30 101,75 

RX2040 20 x 40 111,95 

RX3040 30 x 40 165,15 

RX3535 35 x 35 178,45 

RX3543 35 x 43 214,20 

Röntgenschaukästen 

Kat. # Material Grösse Anschluss Euro 




A009 Metall 108x43 6 x 15 Watt 465,00 

Röntgenfilm-Handentwicklung 

Diese praktische und robuste 

Handentwicklungsanlage aus PVC ist eine preiswerte 

Alternative zu teuren Routineanlagen und für die 

Entwicklung von Autoradiographien im 

Forschungsbereich geeignet. 

Sie wird in zwei Formaten 24 x 30 cm und 35 x 43 cm 

angeboten 

Kat. # Grösse Beschreibung/Lieferumfang 

TK2430 für 24x30cm 2 x 7 L Tanks mit Deckel 

file:///F|/Kisker/Kisker/deutsch/radio_d.htm (4 von 5) [08.12.2005 22:32:30] 

1 x 8,5 L Tank mit Deckel


A010 für 24x30cm: 7 L Tank mit Deckel 

1 x Untersetzschale 

TK3543 für 35x34cm: 2 x 20 L Tanks mit Deckel 

1 x 30 L Tank ohne Deckel 

1 Wanne mit Ablauf 

A011 Schlauchanschluss-Satz für TK3543 

A012 Untergestell für 3 Tanks 



A014 Rührstab aus PVC, 60 cm lang 

A016 Tankthermometer, Edelstahl 10-40°C 






P.O. Box 1329 


Germany 



Kisker X-ray cassetts have a simple, but abolutly safe 

looking system and are high quality light tight instruments 

for the production of autoradiographs in molecular biology. 

For exposure at deep temperature up to - 70°C we offer 

extra rivetet cassetts, which guarantee absolutly stability. 






* offered in standard and and with additional garant stability 

up to -70°C 

Also we manufacture special custom sizes on request. 

Please ask for quotation. 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Size in cm Cat. # standard Euro Cat.# riveted Euro 

9 x 12 120001 69,00 -- 

13 x 18 120002 79,25 ZV0002 84,35 

15 x 30 120003 86,90 ZV0003 92,00 

15 x 40 120004 122,20 ZV0004 127,30 

18 x 24 120005 93,00 ZV0005 96,00 

18 x 43 120006 125,25 ZV0006 127,30 

20 x 25 -- ZV0025 117,10 

20 x 40 120007 122,20 ZV0007 127,30 

20 x 60 120008 218,80 ZV0008 229,55 

20 x 80 120009 275,60 ZV0009 280,70 

20 x 96 120010 399,30 ZV0010 408,50 

24 x 30 120012 110,45 ZV0012 117,60 

30 x 40 120014 122,70 ZV0014 132,95 

file:///F|/Kisker/Kisker/radio_d.htm (1 von 5) [08.12.2005 22:32:31]


30 x 60 120015 276,60 ZV0015 296,00 

30 x 80 120016 403,90 ZV0016 416,70 

30 x 90 120017 444,30 ZV0017 449,90 

35 x 35 120019 135,50 ZV0019 145,70 

35 x 43 120020 144,70 ZV0020 152,90 

40 x 40 120022 152,90 ZV0022 158,00 

Intesifying Screens 

We offer two lines of high quality intensifying screens. The intensifying screens increase the 

sensitivity of the X-ray films. 

*Typ Universal - sensitivity 100, Calcium-Tungstate, blue emitting, no static loading,low 

intensification, very good solution. 

*Typ Extrarapid - sensitivity 200, Calcium-Wolframat, blue emitting, high intesification, very good 

resulotion, free election of standard films, replacing the formerly available "Cronex lightning plus", 

our most popular CaWO4 screen 


Size Cat.#.Universal. Euro Cat. # Extrarap Euro 

9 x 12 212001 19,95 

13 x 18 212002 31,60 E1318 39,90 

15 x 30 212003 48,90 

15 x 40 212004 67,80 E1540 79,25 

18 x 24 212005 47,90 E1824 55,00 

18 x 43 212006 67,50 E1843 91,90 

20 x 25 61,90 E 2025 79,00 

20 x 40 212007 97,15 E2040 109,90 

20 x 60 212008 193,80 E2060 193,80 

20 x 80 212009 232,60 E2080 232,60 

20 x 96 212010 265,35 

24 x 24 212011 81,30 

24 x 30 212012 71,90 E2430 86,65 

30 x 40 212014 96,70 E3040 138,00 

30 x 60 212015 254,60 

30 x 90 212016 354,80 



35 x 35 212018 142,35 E3535 152,45 

35 x 43 212019 175,95 E3543 185,85 

40 x 40 212021 181,35 E4040 198,40 




201001 Cleaning solution 250 ml 14,85 

201002 Cl. Sol. with sprayer 250 ml 19,95 

Film hangers 

Our film hangers are made from stainless, polished steel and are available in 

useful sizes. The patented closers in the corners are constructed, to avoid in 

any way damaging of the film, when placing into the frame, while the film is 

fixed strongly and dryes completly up to the corner. All film hangers are 

supplied with a 46cm long holder bar. 

Cat. # Size Euro 

FR1318 13 x 18 cm 28,10 

FR1530 15 x 30 cm 28,10 

FR1540 15 x 40 cm 28,10 

FR1824 18 x 24 cm 28,10 

FR1843 18 x 43 cm 40,40 

FR2025 20 x 25 cm 40,40 

FR2040 20 x 40 cm 30,20 

FR3040 30 x 40 cm 30,20 

FR3535 35 x 35 cm 30,20 

FR3543 35 x 43 cm 30,20 

FR4040 40 x 40 cm 30,20 




Fuji X-ray films for autoradiography are of highest quality and useful 

for all types of experiments. Proteines and DNA`s may be marked 

with all types of radioisotopes. The Fuji RX film is a on both sides 

covered X-ray film with high contrast for all autoradiography 

experiments. He is of high sensitivity for exposure with all UV/blue 

emitting Calcium-Wolframat- or rare earth intensifying screens. The 

films are supplied in packs of 100 sheets. 

Cat. # size in cm Euro 

RX1318 13 x 18 35,30 

RX 1824 18 x 24 60,85 

RX2430 24 x 30 101,75 

RX2040 20 x 40 111,95 

RX3040 30 x 40 165,15 

RX3535 35 x 35 178,45 

RX3543 35 x 43 214,20 


Cat. # Material size power Euro 

A005 metal 24 x 30 4 x 8 Watt 299,90 

A007 metal 36 x 43 2 x 15 Watt 299,90 

A008 metal 72 x 43 4 x 15 Watt 375,00 

A009 metal 108x43 6 x 15 Watt 465,00 


A practical and robust developer made of PVC, offering an 

economical alternative to expensive routine units. It is 

suitable for the development of autoradiography in the 

research sector and is available in two formats, up to 24 x 

30 cm and 35 x 43 cm. 



file:///F|/Kisker/Kisker/radio_d.htm (4 von 5) [08.12.2005 22:32:31] 

1 x 8,5 L tank with lid 

1 set-on-try

















P.O. Box 1329 


Germany 


Chest freezer Value Line 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Laboratory chest freezer with condenser in outer jacket.Natural air circulaition and manual 

thawing. Condensate drain integrated in base. Operating panel in front cover with 

electronic control and digital display (LED). With acoustic alarm and No-Volt remote alarm 

contact. External casing and interior made of specially galvanized steel panelling with 

white coating. Lockable lid with special seal all round and spring-loaded hinges to allow 

opening at any angle. Inner covering included (only -83°C). With wheels (exept 74 liter 

chest), supplied separately. 


VL-7453 -30/-53 °C 74 Liter 555x635x885 385x385x470 

VL-29653 -30/-53 °C 296 Liter 1260x695x885 890x442x610 

VL-38353 -30/-53 °C 383 Liter 1560x695x885 1190x442x610 

VL-7483 -40/-83 °C 74 Liter 555x635x885 385x385x470 

VL-29683 -40/-83 °C 296 Liter 1260x695x885 890x442x610 

VL-38383 -40/-83 °C 383 Liter 1560x695x885 1190x442x610 


VL-7453 1480 mm 45 kg 220-240/50/1 1.890,00 

VL-29653 1500 mm 85 kg 220-240/50/1 2.190,00 

VL-38353 1545 mm 98 kg 220-240/50/1 2.690,00 

VL-7483 1480 mm 45 kg 220-240/50/1 3.290,00 

VL-29683 1500 mm 85 kg 220-240/50/1 4.695,00 

VL-38383 1545 mm 98 kg 220-240/50/1 4.995,00 

Table top freezer ProfiMaster PMU03 

file:///F|/Kisker/Kisker/cryo_d.htm (1 von 22) [08.12.2005 22:32:36]


Laboratory upright freezer with natural air circulation.Heavy-duty refrigeration 

system, maintenance free, between –55 °C to –80°C cascade connection, with 

industrial grade hermetically sealed refrigeration compressors and reliable 

cascade refrigeration ton minimize noise and vibration, aircooled. Operating 

panel with microprocessor driven temperature controler and digital display 

(LED). Includes optical and acoustical alarm device with independent circuit and 

floating contact for connection to an alarm system on the premises. 10mV/K 

terminal for connection to our temperature recorder. Exterior case with stainless 

steel covering, lateral parts white, sheet steel. Two doors (inside and outside), 

front door lockable. Door stop on left. Interior made of stainless steel without 

mounted equipment, making it especially hygienic and easy to clean. 

Cat. # Temperature range °C Brutto content L outer dim. mm inner dim. mm 

PMU0340 -10/-40 30L 810x560x490 330x300x280 

PMU0350 -30/-50 30L 810x560x490 330x300x280 

PMU0380 -70/-80 30L 810x560x490 330x300x280 

Cat. # depth weight kg Volt/Hz/Ph Euro 

PMU0340 1030 mm 61 230/50/1 2.750,00 

PMU0350 1030 mm 63 230/50/1 2.950,00 

PMU0380 1030 mm 82 230/50/1 3.790,00 

Storage System 

Kat.# PMUO3-OS Euro 252,50 consisting of: 2 stainless steel racks for 10 Boxes each, Eppi-Maxi 20 Boxes Eppi- 

Maxi white, 10 x 10 divider for 100 x 1,5/2,0ml Tubes each 

Upright freezer ProfiLine ECU 

Laboratory upright freezer with natural air circulation. Maintenance free high power 

cooloing system with nearly noice and vibration free cooling compressors, aircooled. 

Electronic control wit digital display (LED). Includes optical and acoustical alarm device 

with independent circuit and floating contact for connection to an alarm system on the 

premises. Exterior case with stainless steel covering and corrosion protection. Double 

sealing and intermediate lid avoid loss of cold while opening.Interior made from special 

coated steel with smoth surface for easy cleaning. With Rolls. Refrigerant: 1 Stepp R134a 

/ R040a, 2. Stepp: R508b 

Cat.# Temperature range Brutto content outer dim. mm inner dim. 





Cat.# depth at opened door weight Volt/Hz/Ph Euro 

ECU 4085-5 1590 mm 247 kg 220-240/50/1 7.095,00 



ECU 5085-5 1730 mm 268 kg 220-240/50/1 8.695,00 

ECU 6085-5 1840 mm 286 kg 220-240/50/1 9.195,00 

ECU 7085-5 2010 mm 316 kg 220-240/50/1 9.795,00 

Chest freezer ProfiLine ECC 

Laboratory chest freezer with natural air circulation. Maintenance free high power cooloing 

system with nearly noice and vibration free cooling compressors, aircooled. Electronic control 

wit digital display (LED). Includes optical and acoustical alarm device with independent circuit 

and floating contact for connection to an alarm system on the premises. Exterior case with 

stainless steel covering and corrosion protection. Double sealing and intermediate lid avoid 

loss of cold while opening.Interior made from special coated steel with smoth surface for 

easy cleaning. With Rolls. Refrigerant: 1 Stepp R134a / R040a, 2. Stepp: R508b 









ECC 1085-5 1750 mm 115 kg 220-240/50/1 5.990,00 

ECC 2085-5 1750 mm 193 kg 220-240/50/1 6.890,00 

ECC 3085-5 1750 mm 209 kg 220-240/50/1 7.590,00 

ECC 4085-5 1750 mm 242 kg 220-240/50/1 7.990,00 

ECC 5085-5 1750 mm 248 kg 220-240/50/1 8.590,00 

ECC 6085-5 1750 mm 274 kg 220-240/50/1 9.190,00 


Temperaturüberwachungs- und Protokollsystem für bis zu 4 Kühl- und/oder Tiefkühlgeräten sowie Wärme- und 

Brutschränke. Bedienerfeld mit digitaler Anzeigemöglichkeit von Datum, Uhrzeit, Temperatur der 4 Meßstellen, 

automatische Umschaltung von Sommer auf Winterzeit. Die Digitalanzeige dient gleichzeitig der Programmierung. 

Meßstellen können idividuell bezeichnet werden. Akustische Alarmeinrichtungen mit individuell einstellbaren 

Warnschwellen und Verzögerungszeiten. Potentialfreier Kontakt zum Anschluß an zentrale Leitstellen oder 

Telefonweiterschaltung. 3 Meldeeingänge für Türkontakt und/oder Anlagenstörung. Protokolliert bis zu 4 Meßstellen 

gleichzeitig über einen Zeitraum von bis zu 781 Tagen ( Minutenintervall). Die Meßwerte bleiben auch bei Netzausfall 

gespeichert. Ein optional erhältlicher Akku erlaubt Messungen und Speicherungen auch bei Netzausfall. Das 

Meßprotokoll kann direkt am Gerät ausgelesen werden oder über die RS232 Schnittstelle an einen PC oder seriellen 

Drucker übergeben werden. (Software siehe Sonderausstattung). Bis zu 79 ProfiTec´s lassen sich untereinander 

über die RS485 Schnittsttelle vernetzen. Die Meßprotokolle können dann mit dem PC einzeln abgerufen werden. Das 

Gehäuse besteht aus Kunststoff mit Klarsichtdeckel über dem Bedienungsfeld. Mit Schrauben und Dübelsatz für 

Wandbefestigung. 





Auflösung 0,5 °C 

Umgebungstemperatur: - bis +50 °C 

Temperaturfühler mit 12 m 

Leitung 

Temperaturfühler mit mehr als 12 

m 

ZPTEC-40-12Z 55,00 



Meßstellen 4 

Meldeeingänge 3x230V mit Zeitverzögerung 

Speichervermögen 

Schnittstellen: 

225.000 Meßwerte je 

Meßstelle 

RS232–serielle 

Druckerschnittst. 

Verbindungskabel zw ProfiTec 

und. PC 

Verbindungskabel zw. ProfiTec 

und. 

Drucker (serielle 

Schnitstelle)1,5m 

a.A. 

ZPTEC2-043 z 21,00 

ZPTEC2-045 z 21,00 

Auswert und Protokoll-Software ZPTEC2-042 z 187,00 

Digitalwandler zur Vernetzung 

der 


ZPTEC2-044 z 189,00 




ProfiTec 4A Kat.Nr.: GPTEC4A 


Thermost-Upright freezers 

Paralleldrucker beim 

Direktausdruck 

Thermostat-Upright Freezers are used for continous tempering for different applications , 

e.g. sample storage (4°C), estimation of enzym activities (25°C) or colony quantity at 

37°C. The temperature range is from 4°C to 40°C, service free and reliable controled with 

+/- 0,5°C constant temerature. 

technical specifications: 

- complete isolated freezer with universal temperature-control unit 

-2-fold isolated glas in eloxated Aluframe (modell with glas door) 

water protected foil front 

- setting 4 - 40°C in 1°C-steps 

- 2-LCD-displays 

- radiale fun, air stream 320m3/h 


TS-ST- 

180 

TS-GT- 

180 

TS-ST- 

260 

180 3 Standard 

180 3 Glas 




TS-GT- 

260 

TS-ST- 

360 

TS-GT- 

360 

TS-ST- 

500 

TS-GT- 

500 

Cat. # weight 

TS-ST- 

180 

TS-GT- 

180 

TS-ST- 

260 

TS-GT- 

260 

TS-ST- 

360 

TS-GT- 

360 

TS-ST- 

500 

TS-GT- 

500 

260 4 Glas 


360 5 Glas 


500 6 Glas 

Inner dimension LxWxH 

in mm 

39,00 kg 513 x 433 x 702 

50,00 kg 513 x 433 x 702 

Outer dimension LxWxH 

in mm 

602 x 600 x 850 mit 

Arbeitsplatte 

602 x 600 x 855 mit 

Arbeitsplatte 

Euro 

965,00 

1098,00 

49,00 kg 513 x 433 x 1074 602 x 600 x 1200 1255,00 

66,50 kg 513 x 433 x 1200 602 x 600 x 1200 1398,00 

64,50 kg 513 x 433 x 1418 602 x 600 x 1611 1445,00 

82,00 kg 513 x 433 x 1418 602 x 600 x 1611 1598,00 

79,5 kg 646 x 516 x 1338 755 x 715 x 1515 1745,00 

98,5 kg 646 x 516 x 1338 755 x 715 x 1515 1945,00 

Explosion-protected Laboratory uprighr freezers 

Technical Specification EX -freezer: 

- temperature range steppless 2-12°C 

- automatic defrosting 

- nockable door 

- inside white PS 

- Ex-protection: inside free of ignition sources 








Cat. # weight 

Inner dimension LxWxH in 

mm 

Outer dimension LxWxH in 

mm 

Euro 

TEX-180 37,00 kg 734 x 513 x 433 850 x 602 x 600 669,00 

TEX-260 46,50 kg 1047 x 513 x 433 1215 x 602 x 600 709,00 

TEX-360 62,00 kg 1418 x 513 x 433 1589 x 602 x 600 845,00 

TEX-500 77,00 kg 1338 x 646 x 516 1515 x 755 x 715 989,00 


Quali - Stickers are precutted labels for tubes 0,2 - 2,0ml. They are convenient to use, 

simply write on the label, peel of from the backing paper and press into position on the 

tube. Quali - Stickers are temperature resistant from -196°C to +121°C. 

Quali - stickers adhere to all plastics, they will not smear, dry out, peel or fall off. Quali 

stickers can be used in freezers, liquid nitrogen and boiling water. They will accept all 

marker pens and are supplied in rolls of 1000 stickers, exept the laser stickers, which are 

supplied on sheets and come with printing instructions. 

Cat. # size For tubes Pack size Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 Stück 29,10 




Cryoboxes with hinged lid for 50 und 100 1,5/2,0ml tubes 

The 100 place cryobox features a three point hinged lid, that locks for secure lid closure. 

The 100 place cryobox also features imprinted coordinates on the base and molded grid 

lines on the lid. The neon mixed versions include blue, green, pink, yellow and orange. 

The cryobox withstands -80°C and the hinged lid is easy to openeven when frozen. 



Cat. # Places / ml color Pack size Euro 

R030 50x1,5/2,0 natural 5 24,90 

R030-A 50x1,5/2,0 neon mix 5 25,90 

R031 100x1,5/2,0 natural 5 33,25 

R031-A 100x1,5/2,0 neon mix 5 34,25 

Quali-Box, 96 place Cryo Card Box for 1,5 & 2,0ml Tubes 





White card box made from deep temperature resistant waterproofed cardboard 

material. 

Dimensions: 174 x 122 x 51mm 

Divider: 8 x 12places/ 30mm hight 

Cat.# Description size Euro 

R096 Quali-96 place Box 174x122x51mm 5,25 

Cryobox wit telescope lid, our new 81 place topversion, impoved version 

Only this 81 place cryobox has imprinted coordinates on the base, the lid is now 

glas clear for better sample identification. 

These polypropylene cryobox can be stored up to -150°C, autoclaved and is 

available in neon colors blue, green, orange, pink and yellow. 

Dimensions: R14 & R15: 130 x 130 x 45mm ( W x D x H ) 


R014 natural 5 17,65 

R015 neon mix 5 17,65 

R014-1 natural 1 3,70 


R015-GR neon green 1 3,70 

R015-GE neon yellow 1 3,70 



Economy Cryobox Serie with Telescopelid, size 130 x 130 x 45mm 

This box made from deep temperature resistant polypropylene, freezable up to -190 C° 

and autoclavable. Transparent telescope lid for easy sample identification. The boxes with 

9 x 9 dividers are available in differnt colours: 5 x neon, 7 x standard. The boxes with 

other dividers or blank boxes are neon coloured and can be delivered in other colours on 

request. 



R034 natural 2,80 2,70 

R034-NGE neon-yellow 2,90 2,80 

R034-NBL neon-blue 2,90 2,80 

R034-NGR neon-green 2,90 2,80 






Cat. # clour Euro Euro 

R034-W white 3,35 3,25 

R034-GE yellow 3,35 3,25 

R034-BL blue 3,35 3,25 

R034-GR green 3,35 3,25 

R034-RO red 3,50 3,40 

R034-PI pink 3,50 3,40 

R034-SW black 3,50 3,40 


Cat. # colour Euro Euro 

R034-7 natural 3,10 2,95 

R034-7-NGE neon-yellow 3,60 3,50 

R034-7-NBL neon-blue 3,60 3,50 

R034-7-NGR neon-green 3,60 3,50 

R034-7-NPI neon-pink 3,60 3,50 




R034-8 natural 3,35 3,25 

R034-8-NGE yellow 3,85 3,75 

R034-8-NBL blue 3,85 3,75 

R034-8-NGR green 3,85 3,75 

R034-8-NPI pink 3,80 3,70 

R034-8-NOR orange 3,80 3,70 



R034-B natural 1,95 1,85 



R034-B-NGE neon-yellow 1,95 1,85 

R034-B-NBL neon-blue 1,95 1,85 

R034-B-NGR neon-green 1,95 1,85 



Dividers 30mm 1-49 units 50+ units 

Cat. # Tubes Euro Euro 

R034-R-13 13x13/8 2,40 2,30 

R034-R-12 12x12/8 1,65 1,60 

R034-R-10P 10x10/8 Plastic 1,20 1,15 

R034-R-9P 9x9/8 Plastic 1,35 1,30 

R034-R-8P 8x8/8 Plastic 1,35 1,30 

R034-R-7 7x7/8 1,35 1,30 


made from ridid ultra low temperature polypropylen with hightransparent lid, neon - 

colours, storage up to 80°C possible, autoclavable. 

Cat.# for Tubes mm Ø places dimension in mm Euro 

R039-natural 12,5 9 x 9 130x130x70-80 3,15 

R039-yellow 12,5 9 x 9 130x130x70-80 3,70 

R039-blue 12,5 9 x 9 130x130x70-80 3,70 

R039-green 12,5 9 x 9 130x130x70-80 3,70 

R039-red 12,5 9 x 9 130x130x70-80 3,70 

R039-orange 12,5 9 x 9 130x130x70-80 3,70 

R039-7-natural 16,5 7 x 7 130x130x70-80 3,40 

R039-7-yellow 16,5 7 x 7 130x130x70-80 3,90 

R039-7-blue 16,5 7 x 7 130x130x70-80 3,90 

R039-7-green 16,5 7 x 7 130x130x70-80 3,90 

R039-7-red 16,5 7 x 7 130x130x70-80 3,90 

R039-7-orange 16,5 7 x 7 130x130x70-80 3,90 

R039-1-natural without divider 1 130x130x70-80 2,75 

R039-1-yellow without divider 1 130x130x70-80 3,15 

R039-1-blue without divider 1 130x130x70-80 3,15 



R039-1-green without divider 1 130x130x70-80 3,15 

R039-1-red without divider 1 130x130x128 3,15 

R039-1-orange without divider 1 130x130x128 3,15 

Dividers 

Cat. # for Tubes Hight Euro 

R039-R-13 8 30 mm 2,35 

R039-R-12 9 30 mm 1,70 

R039-R-10P 12 30 mm 1,20 

R039-R-9P 13 30 mm 1,35 

R039-R-8P 14 30 mm 1,35 

R039-R-7 16,5 30 mm 1,35 

R039-R-6 19,5 30 mm 1,75 

R039-R-5 23,5 30 mm 1,20 

R039-R65-13 8 65 mm 2,50 

R039-R65-12 9 65 mm 1,90 

R039-R65-10 12 65 mm 1,90 

R039-R65-9 13 65 mm 1,90 

R039-R65-8 14 65 mm 1,90 

R039-R65-7 16,5 65 mm 1,95 

R039-R65-6 19,5 65 mm 1,90 

R039-R65-5 23,5 65 mm 1,90 


made from ridid ultra low temperature polypropylen with hightransparent lid, neon - 

colours, storage up to 190°C possible, autoclavable. 

Cat.# Tubes places size in mm Euro 

R035-natural PCR 0,2ml 12x12 130x130x32 5,90 

R035-yellow PCR 0,2ml 12x12 130x130x32 5,90 

R035-blue PCR 0,2ml 12x12 130x130x32 5,90 

R035-green PCR 0,2ml 12x12 130x130x32 5,90 

R035-red PCR 0,2ml 12x12 130x130x32 5,90 




R036-natural Mini 0,5ml 10x10 130x130x37 5,80 

R036-yellow Mini 0,5ml 10x10 130x130x37 5,80 

R036-blue Mini 0,5ml 10x10 130x130x37 5,80 

R036-green Mini 0,5ml 10x10 130x130x37 5,80 

R036-red Mini 0,5ml 10x10 130x130x37 5,80 


R037-natural Cell Box 15ml 25 130x130x128 8,25 

R037-yellow Cell Box 15ml 25 130x130x128 8,25 

R037-blue Cell Box 15ml 25 130x130x128 8,25 

R037-gree Cell Box 15ml 25 130x130x128 8,25 

R037-red Cell Box 15ml 25 130x130x128 8,25 


R038-natural Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-yellow Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-blue Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-green Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-red Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 



Inventory racks with handle for chest units for cryoboxes up to 136 x 136 mm square in 

50/75/100mm hight 

Cat. # Quantity/ Boxhight W x D x H in mm Euro 

TG-5 5 x 50mm 141 x 141 x 279 54,90 

TG-6 6X 50mm 141 x 141 x 334 59,90 

TG-7 7 x 50mm 141 x 141 x 389 56,90 

TG-8 8 x 50mm 141 x 141 x 444 57,90 

TG-9 9 x 50mm 141 x 141 x 499 57,90 

TG-10 10 x 50mm 141 x 141 x 554 59,90 

TG-11 11 x 50mm 141 x 141 x 609 58,90 

TG-12 12 x 50mm 141 x 141 x 664 58,90 

TG-13 13 x 50mm 141 x 141 x 719 69,90 



TG-14 14 x 50mm 141 x 141 x 774 75,80 

TG-75-4 4 x 75mm 141 x 141 x 325 52,00 

TG-75-6 6 x 75mm 141 x 141 x 485 53,00 

TG-75-7 7 x 75mm 141 x 141 x 565 53,00 

TG-75-8 8 x 75mm 141 x 141 x 645 58,00 

TG-75-9 9 x 75mm 141 x 141 x 725 71,00 

TG-75-10 10 x 75mm 141 x 141 x 805 81,00 

TG-100-3 3 x 100mm 141 x 141 x 320 69,00 

TG-100-4 4 x 100mm 141 x 141 x 425 70,00 

TG-100-5 5 x 100mm 141 x 141 x 530 71,00 

TG-100-6 6 x 100mm 141 x 141 x 635 76,00 

TG-100-7 7 x 100mm 141 x 141 x 740 81,00 

TG-130-3 3 x 130mm 141 x 141 x 410 79,70 

TG-130-4 4 x 130mm 141 x 141 x 545 82,75 

TG-130-5 5 x 130mm 141 x 141 x 680 90,55 




50/75/100mm hight 


SG-32-15 3 x 5 x 32mm 142 x 425 x 185 99,95 

SG-32-18 3 x 6 x 32mm 142 x 425 x 224 106,45 

SG-32-21 3 x 7 x 32mm 142 x 425 x 264 112,80 

SG-32-20 4 x 5 x 32mm 142 x 565 x 185 105,95 

SG-32-24 4 x 6 x 32mm 142 x 565 x 224 111,60 

SG-32-28 4 x 7 x 32mm 142 x 565 x 264 117,90 

SG-8 4 x 2 x 50mm 142 x 285 x 223 95,85 

SG-9 3 x 3 x 50mm 142 x 425 x 169 86,40 

SG-10 2 x 5 x 50mm 142 x 285 x 277 101,25 

SG-12 3 x 4 x 50mm 142 x 425 x 223 86,90 

SG-15 3 x 5 x 50mm 142 x 425 x 277 99,70 



SG-16 4 x 4 x 50mm 142 x 565 x 223 98,10 

SG-20 4 x 5 x 50mm 142 x 565 x 277 121,70 

SG-75-6 3 x 2 x 75mm 142 x 425 x 163 76,70 

SG-75-8 4 x 2 x 75mm 142 x 565 x 163 79,75 

SG-75-9 3 x 3 x 75mm 142 x 425 x 242 86,90 

SG-75-10 5 x 2 x 75mm 142 x 705 x 163 112,50 

SG-75-12 4 x 3 x 75mm 142 x 565 x 242 99,20 

SG-100-6 3 x 2 x 100mm 142 x 425 x 212 86,40 

SG-100-8 4 x 2 x 100mm 142 x 565 x 212 99,20 




50mm hight 




SGSA-2/2 2 x 2 140x301x123 119,95 

SGSA-2/3 2 x 3 140x301x184 123,80 

SGSA-2/4 2 x 4 140x301x245 132,50 

SGSA-2/5 2 x 5 140x301x306 142,50 

SGSA-2/6 2 x 6 140x301x367 151,50 

SGSA-3/2 3 x 2 140x434x123 127,50 

SGSA-3/3 3 x 3 140x434x184 131,50 

SGSA-3/4 3 x 4 140x434x245 136,50 

SGSA-3/5 3 x 5 140x434x306 144,50 

SGSA-3/6 3 x 6 140x434x367 154,50 

SGSA-4/2 4 x 2 140x567x123 129,50 

SGSA-4/3 4 x 3 140x567x184 132,50 

SGSA-4/4 4 x 4 140x567x245 137,50 

SGSA-4/5 4 x 5 140x567x306 146,50 

SGSA-4/6 4 x 6 140x567x367 156,50 



SGSA-5/2 5 x 2 140x700x123 143,50 

SGSA-5/3 5 x 3 140x700x184 146,50 

SGSA-5/4 5 x 4 140x700x245 149,90 

SGSA-5/5 5 x 5 140x700x306 165,50 

SGSA-5/6 6 x 6 140x700x367 175,50 


Inventory Racks for Microtiter Plates in format 86 x 128 x 18mm 



Cat. # no boxes x hight w x d x h in mm Euro 

MTG-15 15 x 18mm 91 x 133 x 305 84,35 

MTG-16 16 x 18mm 91 x 133 x 325 86,90 

MTG-17 17 x 18mm 91 x 133 x 345 89,45 

MTG-18 18 x 18mm 91 x 133 x 365 92,00 

MTG-19 19 x 18mm 91 x 133 x 385 94,60 

MTG 20 20 x 18mm 91 x 133 x 405 97,15 

MTG-21 21 x 18mm 91 x 133 x 425 99,70 

MTG-22 22 x 18mm 91 x 133 x 445 102,25 

MTG-23 23 x 18mm 91 x 133 x 465 104,80 

MTG-24 24 x 18mm 91 x 133 x 485 107,40 

MTG-25 25 x 18mm 91 x 133 x 505 109,90 

MTG-26 26 x 18mm 91 x 133 x 525 112,50 

MTG-27 27 x 18mm 91 x 133 x 545 115,05 

MTG-28 28 x 18mm 91 x 133 x 565 118,10 

MTG-29 29 x 18mm 91 x 133 x 585 120,15 

MTG-30 30 x 18mm 91 x 133 x 605 122,70 

MTG-31 31 x 18mm 91 x 133 x 625 125,25 

MTG-32 32 x 18mm 91 x 133 x 645 127,80 

MTG-33 33 x 18mm 91 x 133 x 665 130,40 

MTG-34 34 x 18mm 91 x 133 x 685 132,95 

MTG-35 35 x 18mm 91 x 133 x 705 135,50 

MTG-36 36 x 18mm 91 x 133 x 725 138,55 



MTG-37 37 x 18mm 91 x 133 x 745 140,60 

MTG-38 38 x 18mm 91 x 133 x 765 143,15 

Stainless Steal Racks for upright freezers with pull-out-stopp for Microtiterplates 86 x 

128 x 18mm 

Horizontal stainless steel racks with pullout-stop for 

upright freezers 


Cat. # number of plates w x d x h in mm Euro 

MSG-4/8 4 x 8 135x379x209 141,65 

MSG-4/9 4 x 9 135x379x235 150,85 

MSG-4/10 4 x 10 135x379x261 159,50 

MSG-4/11 4 x 11 135x379x287 167,20 

MSG-4/12 4 x 12 135x379x313 175,90 

MSG-4/13 4 x 13 135x379x339 183,55 

MSG-4/14 4 x 14 135x379x365 191,75 

MSG-4/15 4 x 15 135x379x391 200,40 

MSG-4/16 4 x 16 135x379x417 208,10 

MSG-5/8 5 x 8 135x465x209 147,00 

MSG-5/9 5 x 9 135x465x235 156,45 

MSG-5/10 5 x 10 135x465x261 164,50 

MSG-5/11 5 x 11 135x465x287 172,50 

MSG-5/12 5 x 12 135x465x313 180,90 

MSG-5/13 5 x 13 135x465x339 189,10 

MSG-5/14 5 x 14 135x465x365 197,30 

MSG-5/15 5 x 15 135x465x391 205,50 

MSG-5/16 5 x 16 135x465x417 213,70 

MSG-6/8 6 x 8 135x551x209 151,85 

MSG-6/9 6 x 9 135x551x235 161,05 

MSG-6/10 6 x 10 135x551x261 169,25 

MSG-6/11 6 x 11 135x551x287 177,40 

MSG-6/12 6 x 12 135x551x313 185,60 

MSG- 6/13 6 x 13 135x551x339 193,80 

MSG- 6/14 6 x 14 135x551x365 201,95 

MSG- 6/15 6 x 15 135x551x391 210,15 



MSG- 6/16 6 x 16 135x551x417 218,30 

Stainless Steal Racks for upright freezers stopp for Slide Boxes, Typ R100, 222 x 171 x 

33mm,LxWxH L 

Cat. # Quantity Boxes hight x depth B x L x H in mm Euro 

OSG-5/2 5 x 2 187 x 466 x 189 190,00 

OSG-6/2 6 x 2 187 x 466 x 227 218,00 

OSG-7/2 7 x 2 187 x 466 x 264 248,00 

OSG-8/2 8 x 2 187 x 466 x 302 280,00 

OSG-5/3 5 x 3 187 x 688 x 189 209,00 

OSG-6/3 6 x 3 187 x 688 x 227 245,00 

OSG-7/3 7 x 3 187 x 688 x 264 280,00 

OSG-8/3 8 x 3 187 x 688 x 302 315,00 



waterproofed cardbox (st=standard) or with additional special 

waterproofed plastic cover( sp= special). All boxes are supplied with lid 

and dividers as described in different colors: 






136x136x25mm 


136x136x32mm 


136x136x50mm 


140x140x50mm 

Cat. # Euro Cat. # Euro Cat.# Euro Cat. # Euro 

301115WE-1 5,50 301016WE-1 4,30 301100WE-1 3,20 301014WE-1 4,20 

301115WE-2 6,55 301016WE-2 5,35 301100WE-2 4,40 301014WE-2 5,40 

301115GE-1 6,00 301016GE-1 5,40 301100GE-1 5,05 301014GE-1 5,20 

301115GE-2 7,05 301016GE-2 6,70 301100GE-2 6,60 301014GE-2 6,75 



301115BL-1 6,00 301016BL-1 5,40 301100BL-1 5,05 301014BL-1 5,20 

301115BL-2 7,05 301016BL-2 6,70 301100BL-2 6,60 301014BL-2 6,75 

301115GR-1 6,00 301016GR-1 5,40 301100GR-1 5,05 301014GR-1 5,20 

301115GR-2 7,05 301016GR-2 6,70 301100GR-2 6,60 301014GR-2 6,75 

301115RO-1 6,00 301016RO-1 5,40 301100RO-1 5,05 301014RO-1 5,20 

301115RO-2 7,05 301016RO-2 6,70 301100RO-2 6,60 301014RO-2 6,75 





"long" 


136x268x25mm 

EPPI-Mini A 0,5 

"long" 


136x268x32mm 


"long" 


136x268x50mm 


"long" 


140x276x50mm 


301115LWE-1 11,50 301016LWE-1 10,40 301100LWE-1 9,70 301014LWE-1 11,00 

301115LWE-2 13,70 301016LWE-2 11,50 301100LWE-2 10,80 301014LWE-2 11,95 

301115LGE-1 12,60 301016LGE-1 11,65 301100LGE-1 10,80 301014LGE-1 11,75 

301115LGE-2 14,65 301016LGE-2 13,00 301100LGE-2 11,80 301014LGE-2 12,75 

301115LBL-1 12,60 301016LBL-1 11,65 301100LBL-1 10,80 301014LBL-1 11,75 

301115LBL-2 14,65 301016LBL-2 13,00 301100LBL-2 11,80 301014LGL-2 12,75 

301115LGR-1 12,60 301016LGR-1 11,65 301100LGR-1 10,80 301014LGR-1 11,75 

301115LGR-2 14,65 301016LGR-2 13,00 301100LGR-2 11,80 301014LGR-2 12,75 

301115LRO-1 12,60 301016LRO-1 11,65 301100LRO-1 10,80 301014LRO-1 11,75 

301115LRO-2 14,65 301016LRO-2 13,00 301100LRO-2 11,80 301014LRO-2 12,75 




For storage of samples in tubes, boxes are made from deep 

temperature resisting waterproofed cardbox( st= standard) or with 

additional special waterproofed plastic cover (sp = special). All boxes 

are supplied with lid and divders and available in different colors: 



Useful for all tubes up to 22mm Ø(for 15ml) or 34mm Ø (for50 ml) and 

a total lenght of 125mm 



5x5 places, 

122x122x128mm 

6x6 places, 

148x148x128mm 

3x3 places, 

122x122x128mm 

4x4 places, 

148x148x128mm 


301017WE-1 8,90 301019WE-1 9,35 301018WE-1 8,50 301020WE-1 9,00 

301017WE-2 10,20 301019WE-2 10,75 301018WE-2 9,80 301020WE-2 10,35 

101017GE-1 10,45 301019GE-1 11,10 301018GE-1 10,05 301020GE-1 10,60 

301017GE-2 11,80 301019GE-2 12,50 301018GE-2 11,35 301020GE-2 12,00 

301017BL-1 10,45 301019BL-1 11,10 301018BL-1 10,05 301020BL-1 10,60 

301017BL2 11,80 301019BL-2 12,50 301018BL-2 11,35 301020BL-2 12,00 

301017GR-1 10,45 301019GR-1 11,10 301018GR-1 10,05 301020GR-1 10,60 

301017GR-2 11,80 301019GR-2 12,50 301018GR-2 11,35 301020GR-2 12,00 

301017RO-1 10,45 301019RO-1 11,10 301018RO-1 10,05 301020RO-1 10,60 

301017RO-2 11,80 301019RO-2 12,50 301018RO-2 11,35 301020RO-2 12,00 

CellBox Cellculture; freezing- and storageboxes for 15 ml and 50 ml Falcons, long 

version 



CellBox-Mini 

"long" 

5x10 places, 

122x240x128mm 

CellBox-Maxi 

"long" 

6x12 places, 

148x291x128mm 

file:///F|/Kisker/Kisker/cryo_d.htm (18 von 22) [08.12.2005 22:32:37] 

CellBox-Mini 

"long" 

3x6 places, 

122x240x128mm 

CellBox-Maxi "long" 

4x8 places, 

148x291x128mm



301140WE-1 12,50 301142WE-1 13,00 301141WE-1 11,95 301143WE-1 12,45 

301140WE-2 14,35 301142WE-2 14,95 301141WE-2 13,75 301143WE-2 14,30 

301140GE-1 14,80 301142GE-1 15,35 301141GE-1 14,10 301143GE-1 14,70 

301140GE-2 15,80 301142GE-2 16,00 301141GE-2 15,45 301143GE-2 15,55 

301140BL-1 14,80 301142BL-1 15,35 301141BL-1 14,10 301143BL-1 14,70 

301140BL-2 15,80 301142BL-2 16,00 301141BL-2 15,45 301143BL-2 15,55 

301140GR-1 14,80 301142GR-1 15,35 301141GR-1 14,10 301143GR-1 14,70 

301140GR-2 15,80 301142GR-2 16,00 301141GR-2 15,45 301143GR-2 15,55 

301140RO-1 14,80 301142RO-1 15,35 301141RO-1 14,10 301143RO-1 14,70 

301140RO-2 15,80 301142RO-2 16,00 301141RO-2 15,45 301143RO-2 15,55 

Cardboxes 

Cardboxes for storage of samples, 136 x 136 mm square, 50/75/100mm high, 

material made from deep temperature waterproofed cardbox, with special water 

resistant plastic cover. The boxes are available in different hights and can be 

used with the listed dividers for tubes from 8 - 21 mm Ø. 

Cat. # Description Size Euro 

SB-32 box 32mm 2,45 

SB-50 box 50mm 1,75 

SB-75 box 75mm 2,70 

SB-100 box 100mm 5,05 

SB-130 box 130mm 6,90 














Further boxes with other sizes, e.g. 133 x 133mm base are availble on request. 

Cryotubes, sterile, polypropylen, internal thread with silicone washer 

Designed for storing of biological material, human or animal cells, at temperature of 

-196°C. A silicone seal between the cap and the tubes ensures a positive leakproof 

seal at all temperatures. A 1-1/4 turn of the cap is sufficient to seal the vial. Closure 

and tubes are both manufactured of polypropylene having the same coefficient of 

expansion, which ensures an equally secure seal both at room temperature and at 

low cryogenic temperatures. Tubes have a white marking area, can be colour 

coded with cap inserts and are compatible with most storage systems. Sterilized by 

gamma radiation and packed in resealable safty-lock bags of 100. 

Cat. # Volume Form Dimension Euro 

100 Tubes 







Cryotubes, sterile, polypropylen, external thread with silicon washer 

The long form of the caps garantes a simple one hand handling. The standard features of the high security tubes 

allows storage as low as - 196 degrease. The tubes are delivered sterile in bags of 100. 

100 Tub. 

Cat. # Volume Form dimension Euro 







Coulored cap inserts, pp for CV-10 and CV-11 line 

Coulored cap inserts for sample coding 

Cat. # colour Euro/500St. 

CVI-M mixed 14,40 




Cryotubes with safety lid made from high quality polypropylene. 

Silicone free, no risk for contaminations. Tight sealing screw cap with 

Safe-Sealing Lip. Simple handling by star-bottom. DNase-, RNase-, 

endotoxin- und cadmium free. 

Cat. # Volumene Unit Euro. 

CV-VL-1 1,2ml 10 x 100 149,00 

CV-VL-2 2,0ml 10 x 100 149,00 

CV-VL-4 4,0ml 5 x 100 84,00 

CV-VL-5 5,0ml 5 x 100 89,00 


Coulored Cap Inserts fitting into the lids of the cryotubes for easy identification; delivered to 500 

pc. 

Cat. # coulor Euro/500 

CV-VL-W white 8,90 

CV-VL-G yellow 8,90 

CV-VL-B blue 8,90 

CV-VL-GR green 8,90 

CV-VL-R ret 8,90 

CV-VL-V violet 8,90 

CV-VL-GA grey 8,90 


CV-VL-P pink 8,90 

Storage canes 

Storage canes made from aluminium, capacity up to 5 x 1,2 oder 2,0 ml 

cryotubes; useful for storage in liquid nitrogen storage vessels. 

Kat. # length Pack.unit Euro 

CV-H 290mm 12 Stück 10,95 

Cryotube Workstation 



This autoclavable rack holds up to 50 cryotubes and incorporates an universal locking system, 

which locks each vial securely in place. This also enables one hand cap removal. 

Cat. # Pack.unit colour Euro 

CV-WB 1 blue 16,75 



Flüssigstickstoff. Durch hochwirksame Isolierung, eingebunden in eine Aluminiumkonstruktion, gehören sie zu den 

leichtesten und effizientesten verfügbaren Cryo-Behältern. Heben und Ausgießen werden durch entsprechende Form 

und Griffteile vereinfacht. Die Behälter können mit Ausgußtüllen, Druckentnahmevorrichtungen oder Kellen befüllt 

und entleert werden 

A. Easy maintanance lid design 

B. High strength neck tube reduces liquid nitrogen loss 

C. Advanced Chemical Vacuum Retention System- designed for superior vacuum, performance over the life 

of the product. 5 years vacuum warrenty 

D. Superior strength, lightwise aluminium construction 

E. Insulation - MVE`s advanced insulation system provides maximum thermal performance 

Cat. Nr., Modell LAB 4 LAB 5 LAB 10 LAB 20 LAB30 LAB 50 

Price in Euro 395,00 425,00 479,00 658,00 769,00 1.010,00 

storagekap. in Liter liquid-N 4 5 10 21 32 50 

Evaporation rate(Liter/day) 0,19 0,15 0,18 0,18 0,22 0,49 

holdingtime in days 18 33,3 55,6 116,7 128 111 

dimensions 

neck opening in mm 35,5 56 56 51 64 64 

working hight in mm 198 266 343 348 387 559 

total hight in mm 426 462 546 627 611 779 

outerdimension in mm 185 222 260 368 432 432 

innerdimension in mm 139 165 210 289 356 356 

weight empty / filled in kg 2,7 / 6 4/8 6/14 9/26 12/38 15 / 56 






P.O. Box 1329 


Germany 


Labortiefkühltruhe Value Line 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Labortiefkühltruhe mit natürlicher Luftumwälzung und manueller Abtauung sowie 

Aussenmantelverflüssiger. Tauwasserablauf über eingebauten Bodenablauf. 

Bedienungspaneel im Frontgehäuse, Elekrtronikregler mit Digitalanzeige (LED). Mit 

Akustischer Alarmeinrichtung und potentialfreiem Kontakt. Außenverkleidung und 

Innenraum aus spezialgalvanisiertem, weiß beschichteten Stahlblech. Truhendeckel 

abschließbar mit umlaufender Mehrkammerdichtung und Federscharnieren zum 

stufenlosen Öffnen.Die Truhen werden mit Rollen (Ausnahme 74 Liter Truhe) geliefert. 


VL-7453 -30/-53 °C 74 Liter 555x635x885 385x385x470 

VL-29653 -30/-53 °C 296 Liter 1260x695x885 890x442x610 

VL-38353 -30/-53 °C 383 Liter 1560x695x885 1190x442x610 

VL-7483 -40/-83 °C 74 Liter 555x635x885 385x385x470 

VL-29683 -40/-83 °C 296 Liter 1260x695x885 890x442x610 

VL-38383 -40/-83 °C 383 Liter 1560x695x885 1190x442x610 


VL-7453 1480 mm 45 kg 220-240/50/1 1.890,00 

VL-29653 1500 mm 85 kg 220-240/50/1 2.190,00 

VL-38353 1545 mm 98 kg 220-240/50/1 2.690,00 

VL-7483 1480 mm 45 kg 220-240/50/1 3.290,00 

VL-29683 1500 mm 85 kg 220-240/50/1 4.695,00 

VL-38383 1545 mm 98 kg 220-240/50/1 4.995,00 

Labortiefkühlschrank ProfiMaster PMU03 

file:///F|/Kisker/Kisker/deutsch/cryo_d.htm (1 von 24) [08.12.2005 22:32:43]



Hochleistungskühlsystem – ab –55 °C bis –80°C - mit geräusch- und 

erschütterungsarmen Vollhermetikkompressoren, luftgekühlt. Bedinungspaneele 

mit mikroprozessorgesteuertem Temperaturregler mit Digitalanzeige (LED). Mit 

netzunabhängiger Alarmeinrichtung opt./akust. und potentialfreiem Kontakt zum 

Anschuß an eine hauseigene Alarmanlage. Temperaturschreiberanschluß 

10mV/K zum Anschluß eines Temperaturschreibers. Außengehäuse mit 

Edelstahlabdeckung, Seitenteile weiß Stahlblech. Zwei Schranktüren (innen und 

außen), Außentür abschließbar, Türanschlag links. Innenraum aus Edelstahl 

ohne Einbauten, daher besonders hygienisch und reinigungsfreundlich. 

Kat. # Temperaturbereich °C BruttoInh. L Außenmaß mm Innenmaß Mm 

PMU0340 -10/-40 30 810x560x490 330x300x280 

PMU0350 -30/-50 30 810x560x490 330x300x280 

PMU0380 -70/-80 30 810x560x490 330x300x280 

Kat. # Tiefe * Gewicht Volt/Hz/Ph Euro 

PMU0340 1030 mm 61 230/50/1 2.750,00 

PMU0350 1030 mm 63 230/50/1 2.950,00 

PMU0380 1030 mm 82 230/50/1 3.790,00 

Ordnungssystemset ( Modifizierbar ) 

Kat.# PMUO3-OS Euro 252,50 Beinhaltet: 2 Edelstahlgestelle für 10 Boxen Eppi-Maxi, 20 Boxen Eppi-Maxi weiss,10 

x 10 Fächer für je 100 1,5/2,0ml Tubes 

Labortiefkühlschrank ProfiLine ECU 


Hochleistungskühlsystem mit geräusch- und erschütterungsarmen Vollhermetik- 

Kältekompressoren, luftgekühlt. Elektronikregler mit Digitalanzeige (LED). Mit 

netzunabhängiger Alarmeinrichtung opt./akust. und potentialfreiem Kontakt zum Anschuß 

an eine hauseigene Alarmanlage. Außengehäuse Stahlblech mit Korrosionsschutz und 

qualitativ hochwertiger Acryl-Lackierung. Doppeldichtung und Zwischendeckel in der 

Truhe vermindern Kälteverlust beim Öffnen. Hauptschalter mit Sicherheitsschloß. 

Nutzraum aus beschichteten Spezialblech mit glatten Flächen, daher reinigungsfreundlich 

und optimal nutzbar. 25mm Nutzraumdurchführung. Mit Rollen. Kältemittel: 1 Stufe 

R134a / R040a, 2. Stufe: R508b 

Kat.# Temp-ber. Brutto Inh. Außenmaß Innenmaß 





Kat.# Tiefe b.geöff.Tür Gewicht Volt/Hz/Ph Euro 

ECU 4085-5 1590 mm 247 kg 220-240/50/1 7.095,00 

ECU 5085-5 1730 mm 268 kg 220-240/50/1 8.695,00 



ECU 6085-5 1840 mm 286 kg 220-240/50/1 9.195,00 

ECU 7085-5 2010 mm 316 kg 220-240/50/1 9.795,00 

Labortiefkühltruhe ProfiLine ECC 

Labortiefkühltruhe mit natürlicher Luftumwälzung. Wartungsfreies Hochleistungskühlsystem 

mit geräusch- und erschütterungsarmen Vollhermetik-Kältekompressoren, luftgekühlt. 

Elekrtronikregler mit Digitalanzeige (LED). Mit netzunabhängiger Alarmeinrichtung opt./akust. 

und potentialfreiem Kontakt zum Anschuß an eine hauseigene Alarmanlage. Außengehäuse 

Stahlblech mit Korrosionsschutz und qualitativ hochwertiger Acryl-Lackierung. Stabiler 

Truhendeckel, doppelwandig und stark isoliert, ausbalanciert und leicht zu betätigen. 

Doppeldichtung und Zwischendeckel in der Truhe vermindern Kälteverlust beim Öffnen. 

Hauptschalter mit Sicherheitsschloß. Nutzraum aus beschichteten Spezialblech mit glatten 

Flächen, daher reinigungsfreundlich und optimal nutzbar. 25mm Nutzraumdurchführung. Mit 

Rollen, Kältemittel: 1 Stufe R134a / R040a, 2. Stufe: R508b 


ECC 1085- 

5 

ECC 2085- 

5 

ECC 3085- 

5 

ECC 4085- 

5 

ECC 5085- 

5 

ECC 6085- 

5 

-60/-85 °C 90 Liter 737x686x1118 483x419x432 

-60/-85 °C 193 Liter 1232x737x1041 597x483x673 

-60/-85 °C 292 Liter 1530x737x1041 895x483x673 

-60/-85 °C 388 Liter 1829x737x1041 1194x483x673 

-60/-85 °C 484 Liter 2127x737x1041 1492x483x673 

-60/-85 °C 580 Liter 2426x737x1041 1791x483x673 


ECC 1085- 

5 

ECC 2085- 

5 

ECC 3085- 

5 

ECC 4085- 

5 

ECC 5085- 

5 

ECC 6085- 

5 

1750 mm 115 kg 220-240/50/1 5.990,00 

1750 mm 193 kg 220-240/50/1 6.890,00 

1750 mm 209 kg 220-240/50/1 7.590,00 

1750 mm 242 kg 220-240/50/1 7.990,00 

1750 mm 248 kg 220-240/50/1 8.590,00 

1750 mm 274 kg 220-240/50/1 9.190,00 




Temperaturüberwachungs- und Protokollsystem für bis zu 4 Kühl- und/oder Tiefkühlgeräten sowie Wärme- und 

Brutschränke. Bedienerfeld mit digitaler Anzeigemöglichkeit von Datum, Uhrzeit, Temperatur der 4 Meßstellen, 

automatische Umschaltung von Sommer auf Winterzeit. Die Digitalanzeige dient gleichzeitig der Programmierung. 

Meßstellen können idividuell bezeichnet werden. Akustische Alarmeinrichtungen mit individuell einstellbaren 

Warnschwellen und Verzögerungszeiten. Potentialfreier Kontakt zum Anschluß an zentrale Leitstellen oder 

Telefonweiterschaltung. 3 Meldeeingänge für Türkontakt und/oder Anlagenstörung. Protokolliert bis zu 4 Meßstellen 

gleichzeitig über einen Zeitraum von bis zu 781 Tagen ( Minutenintervall). Die Meßwerte bleiben auch bei Netzausfall 

gespeichert. Ein optional erhältlicher Akku erlaubt Messungen und Speicherungen auch bei Netzausfall. Das 

Meßprotokoll kann direkt am Gerät ausgelesen werden oder über die RS232 Schnittstelle an einen PC oder seriellen 

Drucker übergeben werden. (Software siehe Sonderausstattung). Bis zu 79 ProfiTec´s lassen sich untereinander 

über die RS485 Schnittsttelle vernetzen. Die Meßprotokolle können dann mit dem PC einzeln abgerufen werden. Das 

Gehäuse besteht aus Kunststoff mit Klarsichtdeckel über dem Bedienungsfeld. Mit Schrauben und Dübelsatz für 

Wandbefestigung. 



Auflösung 0,5 °C 

Umgebungstemperatur: - bis +50 °C 

Temperaturfühler mit 12 m 

Leitung 

Temperaturfühler mit mehr als 12 

m 

ZPTEC-40-12Z 55,00 



Meßstellen 4 

Meldeeingänge 3x230V mit Zeitverzögerung 

Speichervermögen 

Schnittstellen: 

225.000 Meßwerte je 

Meßstelle 

RS232–serielle 

Druckerschnittst. 

Verbindungskabel zw ProfiTec 

und. PC 

Verbindungskabel zw. ProfiTec 

und. 

Drucker (serielle 

Schnitstelle)1,5m 

a.A. 

ZPTEC2-043 z 21,00 

ZPTEC2-045 z 21,00 

Auswert und Protokoll-Software ZPTEC2-042 z 187,00 

Digitalwandler zur Vernetzung 

der 


ZPTEC2-044 z 189,00 




ProfiTec 4A Kat.Nr.: GPTEC4A 


Thermostatschränke 

file:///F|/Kisker/Kisker/deutsch/cryo_d.htm (4 von 24) [08.12.2005 22:32:43] 

Paralleldrucker beim 

Direktausdruck


Thermostatschränke dienen der kontinuierlichen Temperierung bei unterschiedlichsten 

Anwendungen, z.b. Probenlagerung (4°C), Bestimmung von Enzymaktivitäten (25°C) 

oder Keimzahlen 37°C. Die Temperaturen werden von 4°C bis 40°C wartungsfrei und 

zuverlässig mit +/- 0,5°C Temeraturkonstanz gesteuert. 

Technische Spezifikationen Thermostatschrank: 

-vollisolierter Schrank mit universeller Temperatur-Regeleinheit 

-2-fach Isolierglas im eloxierten Alurahmen (Modelle mit Glastür) 

- wassergeschützte Folienfront 

- Regelbereich 4 - 40°C in 1°C-Schritten 

- 2-LCD-Anzeigen 

- Soll- und Istwert 

- radiales Gebläse, Förderleistung 320m3/h 


TS-ST- 

180 

TS-GT- 

180 

TS-ST- 

260 

TS-GT- 

260 

TS-ST- 

360 

TS-GT- 

360 

TS-ST- 

500 

TS-GT- 

500 

Kat. # Gewicht 

TS-ST- 

180 

TS-GT- 

180 

TS-ST- 

260 

TS-GT- 

260 

TS-ST- 

360 

TS-GT- 

360 

TS-ST- 

500 


180 3 Glas 


260 4 Glas 


360 5 Glas 


500 6 Glas 

Innenmaße LxBxH in 

mm 

39,00 kg 513 x 433 x 702 

50,00 kg 513 x 433 x 702 

Außenmaße LxBxH in mm Euro 

602 x 600 x 850 mit 

Arbeitsplatte 

602 x 600 x 855 mit 

Arbeitsplatte 

965,00 

1098,00 

49,00 kg 513 x 433 x 1074 602 x 600 x 1200 1255,00 

66,50 kg 513 x 433 x 1200 602 x 600 x 1200 1398,00 

64,50 kg 513 x 433 x 1418 602 x 600 x 1611 1445,00 

82,00 kg 513 x 433 x 1418 602 x 600 x 1611 1598,00 

79,5 kg 646 x 516 x 1338 755 x 715 x 1515 1745,00 



TS-GT- 

500 

98,5 kg 646 x 516 x 1338 755 x 715 x 1515 1945,00 

Explosions-geschützte Laborkühlschränke 

Technische Spezifikation EX -Laborkühlschrank: 

- Regelbereich stufenlos 2-12°C 

- automatische Abtauung 

- abschließbare Tür 

- Inneraum aus weißem PS 

- Ex-Schutz: Innenraum frei von Zündquellen 







TEX-180 37,00 kg 734 x 513 x 433 850 x 602 x 600 669,00 

TEX-260 46,50 kg 1047 x 513 x 433 1215 x 602 x 600 709,00 

TEX-360 62,00 kg 1418 x 513 x 433 1589 x 602 x 600 845,00 

TEX-500 77,00 kg 1338 x 646 x 516 1515 x 755 x 715 989,00 

Quali Etiketten, heiss – kalt 

einsetzbar in Kühlschränken, Cryobehältern ( Flüssigstickstoff bis - 196°C) und in 

kochendem Wasser aus chemisch inertem Polyvinyl, verwendbar auf jeder Art von 

Plastik, absolut eng anliegend, d.h. keine Behinderungen in Geräteeinsätzen, einfach zu 

handhaben durch Abziehen von vorgeschnittener Rolle mit 1000 weissen Etiketten oder 

auf Bögen für den Einsatz im Laserdruck. 

Kat. # Grösse für Tubes Pack.einheit Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 Stück 29,10 




Cryoboxen mit anhängendem Deckel für 50 und 100 x 1,5/2,0ml Tubes 



Die Cryoboxen haben eine 3-Punkt Deckelaufhängung, die sicheren Schluß gewährt. Die 

Cryoboxen weisen zudem eingedruckte Koordinaten im Boden und eine Netzunterteilung 

des Deckels auf. Die farbige Packungseinheit beinhaltet neon blau, grün, pink, gelb und 

orange. Die Cryobox ist resistent bis -80°C und der anhängende Deckel kann auch in 

gefrorenem Zustand einfach geöffnet werden. 



Kat. # Plätze / ml Farbe Pack.einheit Euro 

R030 50x1,5/2,0 Natur 5 24,90 

R030-A 50x1,5/2,0 Neon mix 5 25,90 

R031 100x1,5/2,0 Natur 5 33,25 

R031-A 100x1,5/2,0 Neon mix 5 34,25 

Quali-Box, 96-Fächer Cryobox aus Kartonmaterial für 1,5 und 2,0ml Tubes 

Probenlagerung entsprechend Ihren Versuchsreihen: im 96iger Format 

Erweiterte Fächer für einfacheren Zugriff auf Ihre Proben Weisse Cryobox aus 

tieftemperaturbeständigem wasserfestem Kartonmaterial Abmessungen: 174 x 

122 x 51mm Raster 8 x 12 Fächer/30mm hoch 

Kat.# Bezeichnung Grösse Euro 

R096 Quali-96iger Box 174x122x51mm 5,25 

Cryobox mit Teleskopdeckel, unsere neue 81 Platz Topversion 

Jedes Feld im Boden ist alphanumerisch kodiert; durch den glasklaren Deckel sind die 

Proben bestens zu erkennen. Die bis –196°C° gefrierfähigen und autoklavierbaren 

Lagerungsboxen aus Polypropylen sind in leuchtenden Farben (neon) blau, grün, orange, 

pink und gelb erhältlich. Abmessungen R14 & R15: 130 x 130 x 45mm ( B x T x H ) 

Kat. # Farbe Pack.einehit Euro 

R014 natur 5 17,65 

R015 neon mix 5 17,65 

R014-1 natur 1 3,70 


R015-GR neon grün 1 3,70 

R015-GE neon gelb 1 3,70 



Economy Cryobox Serie mit Teleskopdeckel 



Diese Box aus Tieftemperatur beständigem Polypropylen ist bis -150 C° gefrierfähig und 

autoklavierbar. Der Deckel ist durchsichtig zur einfachen Identifizierung der Proben. Zur 

Lagereinteilung stehen die 9x9 Platz Boxen in verschiedenen Farben zur Verfügung: 5 x 

neonfarbig, 7 x standardfarbig. Die übrigen Boxen sind neonfarbig und werden auf 

Anfrage auch standardfarbig geliefert. 



R034 Natur 2,80 2,70 

R034-NGE neon-gelb 2,90 2,80 

R034-NBL neon-blau 2,90 2,80 

R034-NGR neon-grün 2,90 2,80 





R034-W weiss 3,35 3,25 

R034-GE gelb 3,35 3,25 

R034-BL blau 3,35 3,25 

R034-GR grün 3,35 3,25 

R034-RO rot 3,50 3,40 

R034-PI pink 3,50 3,40 

R034-SW schwarz 3,50 3,40 



R034-7 natur 3,10 2,95 

R034-7-NGE neon-gelb 3,60 3,50 

R034-7-NBL neon-blau 3,60 3,50 

R034-7-NGR neon-grün 3,60 3,50 

R034-7-NPI neon-pink 3,60 3,50 






R034-8 natur 3,35 3,25 

R034-8-NGE gelb 3,85 3,75 

R034-8-NBL blau 3,85 3,75 

R034-8-NGR grün 3,85 3,75 

R034-8-NPI pink 3,80 3,70 

R034-8-NOR orange 3,80 3,70 

Box ohne Raster 1-49Pck. 50+Pck 


R034-B natur 1,95 1,85 

R034-B-NGE neon-gelb 1,95 1,85 

R034-B-NBL neon-blau 1,95 1,85 

R034-B-NGR neon-grün 1,95 1,85 



Rastereinsätze 30mm 1-49Pck. 50+Pck. 

Kat. # Röhrchen Euro Euro 

R034-R-13 13x13/8 2,40 2,30 

R034-R-12 12x12/8 1,65 1,60 

R034-R-10P 10x10/8 Plastik 1,20 1,15 

R034-R-9P 9x9/8 Plastik 1,35 1,30 

R034-R-8P 8x8/8 Plastik 1,35 1,30 

R034-R-7 7x7/8 1,35 1,30 

Cryoboxen aus Polypropylen 130 x130mm, variable Höhe 70 - 80mm 

Aus sehr stabilem Polypropylen mit transparentem Deckel, Neon - Farben, Lagerung bis - 

80°C 

Kat.# für Tubes mm Ø Plätze Maße in mm Euro 

R039-natur 12,5 9 x 9 130x130x70-80 3,15 

R039-gelb 12,5 9 x 9 130x130x70-80 3,70 



R039-blau 12,5 9 x 9 130x130x70-80 3,70 

R039-grün 12,5 9 x 9 130x130x70-80 3,70 

R039-rot 12,5 9 x 9 130x130x70-80 3,70 

R039-orange 12,5 9 x 9 130x130x70-80 3,70 

R039-7-natur 16,5 7 x 7 130x130x70-80 3,40 

R039-7-gelb 16,5 7 x 7 130x130x70-80 3,90 

R039-7-blau 16,5 7 x 7 130x130x70-80 3,90 

R039-7-grün 16,5 7 x 7 130x130x70-80 3,90 

R039-7-rot 16,5 7 x 7 130x130x70-80 3,90 

R039-7-orange 16,5 7 x 7 130x130x70-80 3,90 

R039-1-natur ohne Raster 1 130x130x70-80 2,75 

R039-1-gelb ohne Raster 1 130x130x70-80 3,15 

R039-1-blau ohne Raster 1 130x130x70-80 3,15 

R039-1-grün ohne Raster 1 130x130x70-80 3,15 

R039-1-rot ohne Raster 1 130x130x128 3,15 

R039-1-orange ohne Raster 1 130x130x128 3,15 

Rastereinsätze 

Kat. # für Tubes mm Ø Rasterhöhe Euro 

R039-R-13 8 30 mm 2,35 

R039-R-12 9 30 mm 1,70 

R039-R-10P 12 30 mm 1,20 

R039-R-9P 13 30 mm 1,35 

R039-R-8P 14 30 mm 1,35 

R039-R-7 16,5 30 mm 1,35 

R039-R-6 19,5 30 mm 1,75 

R039-R-5 23,5 30 mm 1,20 

R039-R65-13 8 65 mm 2,50 

R039-R65-12 9 65 mm 1,90 

R039-R65-10 12 65 mm 1,90 

R039-R65-9 13 65 mm 1,90 

R039-R65-8 14 65 mm 1,90 

R039-R65-7 16,5 65 mm 1,95 

R039-R65-6 19,5 65 mm 1,90 

R039-R65-5 23,5 65 mm 1,90 

Cryoboxen aus Polypropylen für 0,2ml -- 0 ,5ml -- 15ml und 50ml Tubes 



Aus hoch stabilem Polypropylen mit transparentem Deckel, Neon - Farben, Lagerung bis - 

190°C 

Kat.# Tubes Plätze Maße in mm Euro 

R035-natur PCR 0,2ml 12x12 130x130x32 5,90 

R035-gelb PCR 0,2ml 12x12 130x130x32 5,90 

R035-blau PCR 0,2ml 12x12 130x130x32 5,90 

R035-grün PCR 0,2ml 12x12 130x130x32 5,90 

R035-rot PCR 0,2ml 12x12 130x130x32 5,90 


R036-natur Mini 0,5ml 10x10 130x130x37 5,80 

R036-gelb Mini 0,5ml 10x10 130x130x37 5,80 

R036-blau Mini 0,5ml 10x10 130x130x37 5,80 

R036-grün Mini 0,5ml 10x10 130x130x37 5,80 

R036-rot Mini 0,5ml 10x10 130x130x37 5,80 


R037-natur Cell Box 15ml 25 130x130x128 8,25 

R037-gelb Cell Box 15ml 25 130x130x128 8,25 

R037-blau Cell Box 15ml 25 130x130x128 8,25 

R037-grün Cell Box 15ml 25 130x130x128 8,25 

R037-rot Cell Box 15ml 25 130x130x128 8,25 


R038-natur Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-gelb Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-blau Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-grün Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 

R038-rot Cell Box 50ml 10x50ml + 2x15ml 130x130x128 7,95 


Edelstahl Truhengestelle 



Lagerracks mit Handgriff für Gefriertruhen zum Einlagern von Kryoboxen bis 136 x 136 mm 

Grundfläche und 50/75/100mm Höhe. 


TG-5 5 x 50mm 141 x 141 x 279 54,90 

TG-6 6X 50mm 141 x 141 x 334 59,90 

TG-7 7 x 50mm 141 x 141 x 389 56,90 

TG-8 8 x 50mm 141 x 141 x 444 57,90 

TG-9 9 x 50mm 141 x 141 x 499 57,90 

TG-10 10 x 50mm 141 x 141 x 554 59,90 

TG-11 11 x 50mm 141 x 141 x 609 58,90 

TG-12 12 x 50mm 141 x 141 x 664 58,90 

TG-13 13 x 50mm 141 x 141 x 719 69,90 

TG-14 14 x 50mm 141 x 141 x 774 75,80 

TG-75-4 4 x 75mm 141 x 141 x 325 52,00 

TG-75-6 6 x 75mm 141 x 141 x 485 53,00 

TG-75-7 7 x 75mm 141 x 141 x 565 53,00 

TG-75-8 8 x 75mm 141 x 141 x 645 58,00 

TG-75-9 9 x 75mm 141 x 141 x 725 71,00 

TG-75-10 10 x 75mm 141 x 141 x 805 81,00 

TG-100-3 3 x 100mm 141 x 141 x 320 69,00 

TG-100-4 4 x 100mm 141 x 141 x 425 70,00 

TG-100-5 5 x 100mm 141 x 141 x 530 71,00 

TG-100-6 6 x 100mm 141 x 141 x 635 76,00 

TG-100-7 7 x 100mm 141 x 141 x 740 81,00 

TG-130-3 3 x 130mm 141 x 141 x 410 79,70 

TG-130-4 4 x 130mm 141 x 141 x 545 82,75 

TG-130-5 5 x 130mm 141 x 141 x 680 90,55 


Edelstahl Schrankgestelle 



Lagerracks mit Handgriff für Gefrierschränke zum Einlagern von Cryoboxen bis 136 x 

136mm Grundfläche und 50/75/100mm Höhe 


SG-32-15 3 x 5 x 32mm 142 x 425 x 185 99,95 

SG-32-18 3 x 6 x 32mm 142 x 425 x 224 106,45 

SG-32-21 3 x 7 x 32mm 142 x 425 x 264 112,80 

SG-32-20 4 x 5 x 32mm 142 x 565 x 185 105,95 

SG-32-24 4 x 6 x 32mm 142 x 565 x 224 111,60 

SG-32-28 4 x 7 x 32mm 142 x 565 x 264 117,90 

SG-8 4 x 2 x 50mm 142 x 285 x 223 95,85 

SG-9 3 x 3 x 50mm 142 x 425 x 169 86,40 

SG-10 2 x 5 x 50mm 142 x 285 x 277 101,25 

SG-12 3 x 4 x 50mm 142 x 425 x 223 86,90 

SG-15 3 x 5 x 50mm 142 x 425 x 277 99,70 

SG-16 4 x 4 x 50mm 142 x 565 x 223 98,10 

SG-20 4 x 5 x 50mm 142 x 565 x 277 121,70 

SG-75-6 3 x 2 x 75mm 142 x 425 x 163 76,70 

SG-75-8 4 x 2 x 75mm 142 x 565 x 163 79,75 

SG-75-9 3 x 3 x 75mm 142 x 425 x 242 86,90 

SG-75-10 5 x 2 x 75mm 142 x 705 x 163 112,50 

SG-75-12 4 x 3 x 75mm 142 x 565 x 242 99,20 

SG-100-6 3 x 2 x 100mm 142 x 425 x 212 86,40 

SG-100-8 4 x 2 x 100mm 142 x 565 x 212 99,20 


Edelstahl-Schrankgestelle, horizontales Schubladensystem mit Auszugsstop 

-für Boxen 130 x 130 x 50mm LxBxH 

- opimale Übersicht 

Entnehmen der Gestelle entfällt, da Schubladensystem 




SGSA-2/2 2 x 2 140x301x123 119,95 

SGSA-2/3 2 x 3 140x301x184 123,80 

SGSA-2/4 2 x 4 140x301x245 132,50 

SGSA-2/5 2 x 5 140x301x306 142,50 

SGSA-2/6 2 x 6 140x301x367 151,50 

SGSA-3/2 3 x 2 140x434x123 127,50 

SGSA-3/3 3 x 3 140x434x184 131,50 

SGSA-3/4 3 x 4 140x434x245 136,50 

SGSA-3/5 3 x 5 140x434x306 144,50 

SGSA-3/6 3 x 6 140x434x367 154,50 

SGSA-4/2 4 x 2 140x567x123 129,50 

SGSA-4/3 4 x 3 140x567x184 132,50 

SGSA-4/4 4 x 4 140x567x245 137,50 

SGSA-4/5 4 x 5 140x567x306 146,50 

SGSA-4/6 4 x 6 140x567x367 156,50 

SGSA-5/2 5 x 2 140x700x123 143,50 

SGSA-5/3 5 x 3 140x700x184 146,50 

SGSA-5/4 5 x 4 140x700x245 149,90 

SGSA-5/5 5 x 5 140x700x306 165,50 

SGSA-5/6 6 x 6 140x700x367 175,50 


Edelstahltruhengestelle für Mikrotiterplatten im Format 86 x 128 x 18mm 

Vertikale rostfreie Racks für Truhen mit Klappgriff 

Kat. # Anzahl Boxen x Boxenhöhe B x T x H in mm Euro 

MTG-15 15 x 18mm 91 x 133 x 305 84,35 

MTG-16 16 x 18mm 91 x 133 x 325 86,90 

MTG-17 17 x 18mm 91 x 133 x 345 89,45 

MTG-18 18 x 18mm 91 x 133 x 365 92,00 



MTG-19 19 x 18mm 91 x 133 x 385 94,60 

MTG 20 20 x 18mm 91 x 133 x 405 97,15 

MTG-21 21 x 18mm 91 x 133 x 425 99,70 

MTG-22 22 x 18mm 91 x 133 x 445 102,25 

MTG-23 23 x 18mm 91 x 133 x 465 104,80 

MTG-24 24 x 18mm 91 x 133 x 485 107,40 

MTG-25 25 x 18mm 91 x 133 x 505 109,90 

MTG-26 26 x 18mm 91 x 133 x 525 112,50 

MTG-27 27 x 18mm 91 x 133 x 545 115,05 

MTG-28 28 x 18mm 91 x 133 x 565 118,10 

MTG-29 29 x 18mm 91 x 133 x 585 120,15 

MTG-30 30 x 18mm 91 x 133 x 605 122,70 

MTG-31 31 x 18mm 91 x 133 x 625 125,25 

MTG-32 32 x 18mm 91 x 133 x 645 127,80 

MTG-33 33 x 18mm 91 x 133 x 665 130,40 

MTG-34 34 x 18mm 91 x 133 x 685 132,95 

MTG-35 35 x 18mm 91 x 133 x 705 135,50 

MTG-36 36 x 18mm 91 x 133 x 725 138,55 

MTG-37 37 x 18mm 91 x 133 x 745 140,60 

MTG-38 38 x 18mm 91 x 133 x 765 143,15 

Edelstahl Schrankgestelle, horizontal, mit Auszugsstopp für Mikrotiterplatten 86 x 128 x 

18mm 

Horizontal stainless steel racks with pullout-stop for upright 

freezers 


Kat. # Anzahl d.Platten B x T x H in mm Euro 

MSG-4/8 4 x 8 135x379x209 141,65 

MSG-4/9 4 x 9 135x379x235 150,85 

MSG-4/10 4 x 10 135x379x261 159,50 

MSG-4/11 4 x 11 135x379x287 167,20 

MSG-4/12 4 x 12 135x379x313 175,90 

MSG-4/13 4 x 13 135x379x339 183,55 

MSG-4/14 4 x 14 135x379x365 191,75 

MSG-4/15 4 x 15 135x379x391 200,40 



MSG-4/16 4 x 16 135x379x417 208,10 

MSG-5/8 5 x 8 135x465x209 147,00 

MSG-5/9 5 x 9 135x465x235 156,45 

MSG-5/10 5 x 10 135x465x261 164,50 

MSG-5/11 5 x 11 135x465x287 172,50 

MSG-5/12 5 x 12 135x465x313 180,90 

MSG-5/13 5 x 13 135x465x339 189,10 

MSG-5/14 5 x 14 135x465x365 197,30 

MSG-5/15 5 x 15 135x465x391 205,50 

MSG-5/16 5 x 16 135x465x417 213,70 

MSG-6/8 6 x 8 135x551x209 151,85 

MSG-6/9 6 x 9 135x551x235 161,05 

MSG-6/10 6 x 10 135x551x261 169,25 

MSG-6/11 6 x 11 135x551x287 177,40 

MSG-6/12 6 x 12 135x551x313 185,60 

MSG- 6/13 6 x 13 135x551x339 193,80 

MSG- 6/14 6 x 14 135x551x365 201,95 

MSG- 6/15 6 x 15 135x551x391 210,15 

MSG- 6/16 6 x 16 135x551x417 218,30 

Edelstahl Schrankgestelle für Objektträgerkästen 222 x 171 x 33mm LxBxH, Typ R100 

Kat. # Anzahl Kästen Höhe x Tiefe B x L x H in mm Euro 

OSG-5/2 5 x 2 187 x 466 x 189 190,00 

OSG-6/2 6 x 2 187 x 466 x 227 218,00 

OSG-7/2 7 x 2 187 x 466 x 264 248,00 

OSG-8/2 8 x 2 187 x 466 x 302 280,00 

OSG-5/3 5 x 3 187 x 688 x 189 209,00 

OSG-6/3 6 x 3 187 x 688 x 227 245,00 

OSG-7/3 7 x 3 187 x 688 x 264 280,00 

OSG-8/3 8 x 3 187 x 688 x 302 315,00 



EPPI-Box A : Cryoboxen Einfrier- und Lagerboxen 

EPPI-Box A sind Behälter für die Aufbewahrung von Probenmaterial. 

Sie bestehen aus tiefkältebeständigem, wasserfest bezogenem 

Kartonmaterial. Desweiteren sind sie auch als Ausführung mit 

zusätzlicher wasserdichter Kunststoffbeschichtung erhältlich. Alle 

Boxen werden mit eingelegtem Rastereinsatz und Deckel geliefert. 

Wir bieten Ihnen mit dieser Produktpalette eine Vielfalt von 

Möglichkeiten zur Lagerung von Proben in unterschiedlichen 

Quantitäten und Volumina an. Folgende Farben und Ausführungen 

stehen zu Verfügung: WE = weiss; GE = gelb; BL = blau; GR = grün; 

RO = rot -1 = standard -2 = spezial beschichtet 


EPPI-PCR A 0,2 EPPI-Mini A 0,5 


136x136x25mm 


136x136x32mm 

EPPI-Basic A 

1,5 


136x136x50mm 



140x140x50mm 

Kat. # Euro Kat. # Euro Kat.# Euro Kat. # Euro 

301115WE-1 5,50 301016WE-1 4,30 301100WE-1 3,20 301014WE-1 4,20 

301115WE-2 6,55 301016WE-2 5,35 301100WE-2 4,40 301014WE-2 5,40 

301115GE-1 6,00 301016GE-1 5,40 301100GE-1 5,05 301014GE-1 5,20 

301115GE-2 7,05 301016GE-2 6,70 301100GE-2 6,60 301014GE-2 6,75 

301115BL-1 6,00 301016BL-1 5,40 301100BL-1 5,05 301014BL-1 5,20 

301115BL-2 7,05 301016BL-2 6,70 301100BL-2 6,60 301014BL-2 6,75 

301115GR-1 6,00 301016GR-1 5,40 301100GR-1 5,05 301014GR-1 5,20 

301115GR-2 7,05 301016GR-2 6,70 301100GR-2 6,60 301014GR-2 6,75 

301115RO-1 6,00 301016RO-1 5,40 301100RO-1 5,05 301014RO-1 5,20 

301115RO-2 7,05 301016RO-2 6,70 301100RO-2 6,60 301014RO-2 6,75 

Eppi Box A: Cryoboxen lange Version 

Gleiche Spezifikation wie die vorher beschriebenen Lagerboxen, jedoch in 

langer Form und doppelter Lagerungskapazität 



"lang" 


136x268x25mm 

EPPI-Mini A 0,5 

"lang" 


136x268x32mm 

file:///F|/Kisker/Kisker/deutsch/cryo_d.htm (17 von 24) [08.12.2005 22:32:43] 


"lang" 


136x268x50mm 


"lang" 


140x276x50mm


Kat. # Euro Kat. # Euro Kat. # Euro Cat. # Euro 

301115LWE-1 11,50 301016LWE-1 10,40 301100LWE-1 9,70 301014LWE-1 11,00 

301115LWE-2 13,70 301016LWE-2 11,50 301100LWE-2 10,80 301014LWE-2 11,95 

301115LGE-1 12,60 301016LGE-1 11,65 301100LGE-1 10,80 301014LGE-1 11,75 

301115LGE-2 14,65 301016LGE-2 13,00 301100LGE-2 11,80 301014LGE-2 12,75 

301115LBL-1 12,60 301016LBL-1 11,65 301100LBL-1 10,80 301014LBL-1 11,75 

301115LBL-2 14,65 301016LBL-2 13,00 301100LBL-2 11,80 301014LGL-2 12,75 

301115LGR-1 12,60 301016LGR-1 11,65 301100LGR-1 10,80 301014LGR-1 11,75 

301115LGR-2 14,65 301016LGR-2 13,00 301100LGR-2 11,80 301014LGR-2 12,75 

301115LRO-1 12,60 301016LRO-1 11,65 301100LRO-1 10,80 301014LRO-1 11,75 

301115LRO-2 14,65 301016LRO-2 13,00 301100LRO-2 11,80 301014LRO-2 12,75 

CellBox Zellkultur; Einfrier- und Lagerkassetten für 15 ml und 50 ml Röhrchen 

CellBox ist ein Behälter für die Lagerung von Proben in Röhrchen. Die 

Boxen sind aus tiefkältebeständigem wasserfest bezogenem (-1= 

standard) Kartonmaterial oder mit zusätzlicher wasserdichter 

Kunststoffbeschichtung (-2 = spezial). Alle Boxen werden mit Deckel 

und eingelegtem Rastereinsatz geliefert. Die Behälter sind geeignet für 

alle Röhrchen bis zu 22mm Ø (für 15ml) oder 34mm Ø (für 50 ml) mit 

einer Gesamtlänge von 125mm. Die Maße sind Außenmaße inklusive 

Deckel. Folgende Farben und Ausführungen stehen zur Verfügung: WE 

= weiss; GE = gelb; BL = blau; GR = grün; RO = rot -1 = standard -2 = 

spezial beschichtet 



5x5 Fächer, 

122x122x128mm 

6x6 Fächer, 

148x148x128mm 

3x3 Fäcker, 

122x122x128mm 

4x4 Fächer, 

148x148x128mm 


301017WE-1 8,90 301019WE-1 9,35 301018WE-1 8,50 301020WE-1 9,00 

301017WE-2 10,20 301019WE-2 10,75 301018WE-2 9,80 301020WE-2 10,35 

101017GE-1 10,45 301019GE-1 11,10 301018GE-1 10,05 301020GE-1 10,60 

301017GE-2 11,80 301019GE-2 12,50 301018GE-2 11,35 301020GE-2 12,00 

301017BL-1 10,45 301019BL-1 11,10 301018BL-1 10,05 301020BL-1 10,60 

301017BL2 11,80 301019BL-2 12,50 301018BL-2 11,35 301020BL-2 12,00 

301017GR-1 10,45 301019GR-1 11,10 301018GR-1 10,05 301020GR-1 10,60 

301017GR-2 11,80 301019GR-2 12,50 301018GR-2 11,35 301020GR-2 12,00 

301017RO-1 10,45 301019RO-1 11,10 301018RO-1 10,05 301020RO-1 10,60 

301017RO-2 11,80 301019RO-2 12,50 301018RO-2 11,35 301020RO-2 12,00 



CellBox Zellkultur; Einfrier- und Lagerkassetten für 15 ml und 50 ml Röhrchen, lange 

Version 

Gleiche Spezifikation wie die vorher beschriebenen, jedoch in langer Form und 

doppelter Kapazität 


CellBox-Mini 

"long" 

5x10 Fächer, 

122x240x128mm 

CellBox-Maxi 

"long" 

6x12 Fächer, 

148x291x128mm 

CellBox-Mini 

"long" 

3x6 Fächer, 

122x240x128mm 

CellBox-Maxi "long" 

4x8 places, 

148x291x128mm 


301140WE-1 12,50 301142WE-1 13,00 301141WE-1 11,95 301143WE-1 12,45 

301140WE-2 14,35 301142WE-2 14,95 301141WE-2 13,75 301143WE-2 14,30 

301140GE-1 14,80 301142GE-1 15,35 301141GE-1 14,10 301143GE-1 14,70 

301140GE-2 15,80 301142GE-2 16,00 301141GE-2 15,45 301143GE-2 15,55 

301140BL-1 14,80 301142BL-1 15,35 301141BL-1 14,10 301143BL-1 14,70 

301140BL-2 15,80 301142BL-2 16,00 301141BL-2 15,45 301143BL-2 15,55 

301140GR-1 14,80 301142GR-1 15,35 301141GR-1 14,10 301143GR-1 14,70 

301140GR-2 15,80 301142GR-2 16,00 301141GR-2 15,45 301143GR-2 15,55 

301140RO-1 14,80 301142RO-1 15,35 301141RO-1 14,10 301143RO-1 14,70 

301140RO-2 15,80 301142RO-2 16,00 301141RO-2 15,45 301143RO-2 15,55 

Cryoboxen aus Kartonmaterial 

Weisse Cryoboxen für die Lagerung von Proben, 136 x 136 mm Grundfläche, 

32/50/75/100/130mm Höhe, das Material ist aus tieftemperaturbetändigem 

wasserfestem Kartonmaterial mit zusätzlich wasserdichter 

Kunststoffbeschichtung. Die Boxen sind erhältlich in verschiedenen Höhen und 

können mit den unten aufgeführten Rastern benutzt werden. Durch diese 

Vielfältigkeit können Röhrchen von 8 - 31 mm Ø gelagert werden. 

Die Raster sind 30mm hoch, können aber auch auf Anfrage in anderen Höhen 

für die niedrigeren bzw. höheren Boxen in 25mm, 40mm und 65mm geliefert 

werden. 


SB-32 Box 32mm 2,45 

SB-50 Box 50mm 1,75 

SB-75 Box 75mm 2,70 



SB-100 Box 100mm 5,05 

SB-130 Box 130mm 6,90 

Raster/Röhrchen Ø 

SB-R-4 Raster 4 x 4/31mm 1,80 

SB-R-5 Raster 5 x 5 / 21mm 1,50 

SB-R-6 Raster 6 x 6 / 17mm 1,50 

SB-R-7 Raster 7 x 7 / 16mm 1,35 

SB-R-8 Raster 8 x 8 / 14mm 1,25 

SB-R-9 Raster 9 x 9 / 13mm 1,20 

SB-R-10 Raster 10 x 10 / 12mm 1,20 

SB-R-12 Raster 12 x 12 / 10mm 1,50 

SB-R-13 Raster 13 x 13/9mm 2,45 

SB-R-14 Raster 14 x 14 / 8mm 2,50 

Weitere Boxen mit andern Formaten, z.B. 133 x 133mm Grundfläche sind auf Anfrage erhältlich. 

Cryoröhrchen, steril, Polypropylen, Innengewinde mit Silikondichtung 

Röhrchen zur Lagerung biologischer Proben bei Temperaturen 

bis -190°C, DNase-, RNase- und Pyrogenfrei. Silikondichtung 

zwischen Schraubverschluss und Röhrchen garantiert 

Dichtigkeit bei allen Temperaturen. Röhrchen wird mit 1-1/4 

Drehung verschlossen. Verschluss und Röhrchen sind aus PP 

mit gleichem Ausdehnungskoeffizienten. Die graduierten 

Röhrchen haben ein weißes Beschriftungsfeld und können mit 

farbigen Einsätzen (siehe unten) kodiert werden. Freistehende 

Cryoröhrchen können in der "Workstation" zur einfacheren 

Handhabung eingerastet werden. Die Cryoröhrchen sind 

gamma-sterilisiert und werden in wiederverschließbaren 

Sicherheitsbeuteln zu 100 Stück geliefert. 


100 Tubes 





CV11-4A 4,0ml Freistehend 12,5 x 72 24,90 


Cryoröhrchen, steril, Polypropylen, Aussengewinde mit Silikondichtung 

Die lange Form des Verschlusses garantiert eine einfache einhändige Handhabung. Der Verschluss schließ durch 1- 

1/4 Drehung. Die Röhrchen werden in wiederverschließbaren Sicherheitsbeuteln zu 100 Stück geliefert. 




100 Tub. 







Farbige Schraubverschlusseinsätze, Polypropylen für CV-10 und CV-11 Linie 

Farbige Verschlusseinsätze passend in die Deckel der Cryoröhrchen 

erleichtern die Identifizierung; lieferbar zu 100 Stück. Farben: weiß, blau, 

rot, grün, gelb 


CVI-M gemischt 16,75 

Value Line Cryoröhrchen, steril, Polypropylen, Aussengewinde, freistehend 

Cryoröhrchen mit Sicherheitsschraubdeckel aus hochwertigem 

Polypropylen. Silikon- und Weichmacher frei, daher ohne 

Kontaminationsrisiko. Dichtschließender Schraubdeckel mit 

Außengewinde und Safe-Sealing Lip. Einfache Handhabung durch 

Sternboden. DNase-, RNase-, Endotoxin- und Cadmium frei. 

Kat. # Volumen VE Euro. 

CV-VL-1 1,2ml 10 x 100 149,00 

CV-VL-2 2,0ml 10 x 100 149,00 

CV-VL-4 4,0ml 5 x 100 84,00 

CV-VL-5 5,0ml 5 x 100 89,00 

Farbige Schraubverschlusseinsätze, für CV-VL Linie 

Farbige Verschlusseinsätze passend in die Deckel der Cryoröhrchen erleichtern die 

Identifizierung; 

sie sind beschriftbar uns lassen sich leicht in den Deckel eindrücken 

Verpackungseinheit zu 5x100 Stück. 


CV-VL-W weiß 8,90 



CV-VL-G gelb 8,90 

CV-VL-B blau 8,90 

CV-VL-GR grün 8,90 

CV-VL-R rot 8,90 

CV-VL-V violett 8,90 

CV-VL-GA grau 8,90 


CV-VL-P rosa 8,90 

Halterung für Cryoröhrchen 

Halterungen aus Aluminium, Kapazität von bis zu 5 x 1,2 oder 2,0 ml 

Cryoröhrchen; geeignet zur Tieftemperaturlagerung in Flüssigstickstoff. 

Kat. # Länge Pack.einheit Euro 

CV-H 290mm 12 Stück 10,95 

Cryoröhrchen Workstation 

Diese autoklavierbaren Racks für 50 Cryoröhrchen erlauben auf Grund des Einrastsystems 

das einhändige Öffnen und Verschließen der freistehenden Cryoröhrchen. Gummifüßchen 

gewährleisten einen sicheren Stand, das alphanumerisches Codierungssystem erleichtert die 

Identifizierung der Probenröhrchen. 

Kat. # Pack.einheit Farbe Euro 

CV-WB 1 blau 14,40 



Flüssigstickstoff. Durch hochwirksame Isolierung, eingebunden in eine Aluminiumkonstruktion, gehören sie zu den 

leichtesten und effizientesten verfügbaren Cryo-Behältern. Heben und Ausgießen werden durch entsprechende Form 

und Griffteile vereinfacht. Die Behälter können mit Ausgußtüllen, Druckentnahmevorrichtungen oder Kellen befüllt 

und entleert werden 

A Easy maintanance lid design B High strength neck tube reduces liquid nitrogen loss C Advanced Chemical 

Vacuum Retention System- designed for superior vacuum performance over the life of the product. 5 years 

vacuum warrenty D Superior strength, lightwise aluminium construction E Insulation - MVE`s advanced 

insulation system provides maximum thermal performance 

Kat. Nr., Modell LAB 4 LAB 5 LAB 10 LAB 20 LAB30 LAB 50 

Preis in Euro 395,00 425,00 479,00 658,00 769,00 1.010,00 

Lagerungskap. In Liter Flüßig-N 4 5 10 21 32 50 

Verdampfungsrate(Liter/Tag) 0,19 0,15 0,18 0,18 0,22 0,49 

Statische Haltezeit in Tagen 18 33,3 55,6 116,7 128 111 

Abmessungen 



Halsöffnung in mm 35,5 56 56 51 64 64 

Arbeitshöhe in mm 198 266 343 348 387 559 

Gesamthöhe in mm 426 462 546 627 611 779 

Außendurchmesser in mm 185 222 260 368 432 432 

Innendurchmesser in mm 139 165 210 289 356 356 

Leergewicht / Füllgewicht in kg 2,7 / 6 4/8 6/14 9/26 12/38 15 / 56 

Chart ( vormals MVE ) Aluminium Lagerbehälter, SC und XC Serie -192°C 

Flüssigstickstoff Tieftemperaturlagerungsbehälter 

Diese Serie ist für Anwender gedacht, die nur geringe Kapazitäten für Langzeitlagerung benötigen und dabei Wert 

auf geringen Stickstoffverbrauch legen. Da die Anforderungen an die Lagerung von biologischen Proben erheblich 

variieren können, sind innerhalb dieser Serie Behälter mit unterschiedlichen Kapazitäten und Haltezeiten verfügbar. 

Die Behälter der Aluminiumserie sind leicht und widerstandsfähig und seit Jahren durch innovatives Design sowie 

höchste Leistung und Qualität führend. Alle Behälter werden inklusive 6 Kanister zur Aufnahme der Pailetten bzw. 

Haltern für Cryoröhrchen geliefert. Individuelle Kanister sind je nach Modell verfügbar. Alle Modelle haben 5 Jahre 

Vacuum-Garantie. 

Kat. Nr., Modell SC 3/3 SC 11/7 SC 16/11 SC20/20 

Preis in Euro 689,00 735,00 1.129,00 837,00 


0,5cc Pailletten(10/Halter) -- 540 -- 540 

0,5cc Pail.(Menge/Ebene) 732 732 1098 780 

Anzahl 1,2 & 2,0ml Röhr. -- 150 -- 150 




Abmessungen 






Leergwicht /Füllgewicht in kg 3,6 / 6,5 7,7 / 16,6 6,4 / 19,6 11,8 / 28,3 

Kat. Nr., Modell SC36/32 XC 22/5 XC 34/18 XC 47/11-6 

Preis in Euro 999,00 898,00 979,00 1.298,00 


0,5cc Pailletten(10/Halter) 540 2.400 2.100 4.500 

0,5cc Pail.(Menge/Ebene) 780 3.666 3.000 6.216 

Anzahl 1,2 & 2,0ml Röhr. 150 810 630 1.320 






Abmessungen 






Leergwicht /Füllgewicht in kg 15,4 / 42,4 11,8 / 30 15,4 / 43,5 16,4 / 54,6 






P.O. Box 1329 


Germany 




phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 





ein ideales Hilfsmittel für die Präparation von 0,2 ml PCR-Tubes/-Streifen und 

PCR-Platten 



Eisbehälter 

Die Eisbehälter sind aus langlebigem, doppelhäusigem 

Plastik mit Styroporfüllung. Sie sind geeignet zur 

Zwischenlagerung bei der Probenpräparation. Die glatte 

Oberfläche lässt sich leicht reinigen, die überstehenden 

Kanten dienen als Tragegriff. Zusätzlich erhältlich sind 

passende Acrylracks, die in Eis plaziert, die Lagerung der 

Mikrotubes vereinfacht. 

Maße: KR-ICL: Oberkante 185x185mm, Basis 100x100mm, 

Tiefe 175mm 


Kat. #. Beschreibung Euro 

KR-ICL Eisbehälter 4 Liter 59,00 

KR-ICS Eisbehälter 1,4 Liter 49,00 


KR IC16 Rack für 16 x 0,5/16 x1,5ml Tubes 34,00 



Ständer aus Acryl für Mikrozentrifugengefäße und 50ml Falcon-Tubes 

file:///F|/Kisker/Kisker/deutsch/rack_d.htm (1 von 12) [08.12.2005 22:32:47]


Acrylständer für 50ml Falcon-Tubes bzw. 

Röhrchen bis 29mm Durchmesser 

Acrylständer für 1,5 und 2,0ml 

Reaktionsgefäße bzw. bis 10,7mm 

Durchmesser 

Kat. #. Beschreibung Außenmaße Euro 





Pipettenständer 

Ergonomisch: zur Pipettenaufnahme leicht zugeneigt 

universell für alle Pipetten passend 

Material: leicht zu reinigendes, 3mm starkes Acryl 

Aussenmaße: 20 x 12 x 10cm B x H x T 


R048 Pipettenständer, 4 Plätze 1 31,90 

Röhrchen- und Glashalter 

Gestelle aus autoklavierbarem Polypropylen sind vielseitig 

verwendbar. 

Abtropfgestell für Elektrophorese-Glasplatten 

Einsatz im Wasserbad, nicht schwimmend 

Halterung oder Abtropfgestell für Röhrchen 

Kat. # Stellplätze Maße Euro 

R049-50 50 Tubes 14-17mm 178x95x63 mm LxBxH 9,90 

R049-80 80 Tubes 10-13mm 228x89x60mm LxBxH 8,90 



Combi-Rack 

Dieses System mit vier individuellen Seiten ermöglicht auf äußerst 

platzsparende Weise die Aufnahme verschiedener Gefäße. Die 

Racks aus stabilem Polypropylen sind koppelbar, bis - 80 C° 

einsatzfähig sowie bei 121 °C autoklavierbar. Zur besseren 

Identifizierung sind die Plätze nummeriert. Das System steht in 5 

verschiedenen Neonfarben zur Verfügung. Folgende Gefäße können 

aufgenommen werden: 4 x 50 ml konische Gefäße, 12 x 15 ml 

konische Gefäße 32 x 12 x75 mm Gefäße; 32 x 1,5/2,0ml Gefäße 32 

x 0,5 ml Gefäße 


R001 neon mix 5 Racks 39,90 

R001-N natur 1 Rack 9,45 

R001-B neon blau 1 Rack 9,45 

R001-GR neon grün 1 Rack 9,45 

R001-GE neon gelb 1 Rack 9,45 

R001-O neon orange 1 Rack 9,45 

R001-P neon pink 1 Rack 9,45 


Basierend auf unserem populärem Combi Rack aber mit größeren 

Abmessungen (100 x 100 x 200mm) für folgende Röhrchen: 8 x 50ml / 20 x 

20mm Ø Tubes / 24 x 15ml / 40 x 1,5/2,0ml Tubes (13mm Ø) 

Kat. # Farbe Pack .einheit Euro 





Das Tube Cube System ist ein platzsparendes Rack-System in einer 

Halteschale. Durch jeweiliges Drehen der Racks steht eine andere Bohrung 

zur Aufnahme der unterschiedlichen Gefäße zur Verfügung. Die 

autoklavierbaren und einfrierbaren Racks können an allen Laborplätzen 

eingesetzt werden. Das System ist geeignet zur Aufnahme folgender Gefäße: 

15ml und 50ml konische Röhrchen 12 x 75mm Kulturröhrchen 13 x 100mm 

Kulturröhrchen 16 x 12,5 mm Kulturröhrchen 17 x 100 mm Kulturröhrchen 

1,5ml und 2,0 ml Zentrifugengefäße 

Kat. # Farbe Pack.einh. Euro 

R002 Neon mix 4 Racks mit Tray 49,95 

Fraktionssammler - Racks 

Ein bewährtes Modell mit 80 Plätzen, welches sich auch als Halterung 

für 1,5ml und 2,0 ml Mikrozentrifugengefäße eignet. Die Positionen 

sind in 5 Reihen à 16 angeordnet. Auf Grund des stabilen 

Polypropylens kann das Rack bei Tieftemperaturen bis -80°C 

eingesetzt werden und autoklaviert werden. Die Racks weisen seitlich 

eine gerauhte Fläche zur Beschriftung auf. Zur einfacheren 

Aufbewahrung können die Racks durch die Verwendung von Deckeln 

(R004) gestapelt werden. 

Kat.Nr. Farbe/Beschreib. Pack.einheit Euro 

R003 Racks transparent 5 Racks 19,20 

R003-1 Racks transparent 1 Racks 4,10 

R003-A Racks neon mix 5 Racks 19,90 

R003-FB Rack neon blau 1 4,10 

R003-FG Rack neon grün 1 4,10 

R003-FO Rack neon orange 1 4,10 

R003-FP Rack neon pink 1 4,10 

R003-FY Rack neon gelb 1 4,10 


Aus autoklavierbarem Polypropylen, numerierte Stellplätze, 2 Reihen 

zu 10 Plätzen übereinander angeordnet 

seitlich zusammensteckbar für grössere Versuchsreihen, 

Abmessungen 210x89x50mm 

Kat.# Farbe/Beschreib. Pack.einheit Euro 



R046-B TwoRow Rack, blau 1 Rack 4,10 

R046-R TwoRow Rack, rot 1 Rack 4,10 

R046-W TwoRow Rack, weiss 1 Rack 4,10 

96-Well Reversable Rack mit einrastendem Stapeldeckel für 0,5ml & 

1,5/2,0 ml Tubes 

Ein anwenderfreundliches Arbeits- und Lagerrack, beidseitig 

verwendbar für 96 x 1,5/2,0mlTubes oder 96 x 0,5ml Tubes. 

Das Rack ist aus autoklavierbarem Polypropylen mit längeren 

Griffen, alphanumerischer Kodierung an den Steckplätzen 

und Schreibfeld auf dem Deckel. Verfügbar in naturfarbig 

oder neonfarbig gemischter Packung ( blau, grün, pink, gelb, 

orange ) 

Kat. # Beschreibung Farbe/ Menge Euro 

R041-1 96-Reversable Rack mit Deckel natur/ 1 Stück 8,70 

R041 96-Reversable Rack mit Deckel natur/ 5 Stück 42,90 

R041-A 96-Reversable Rack mit Deckel farbig/ 5 Stück 43,90 

R041-B 96-Reversable Rack mit Deckel blau/ 1 Stück 8,70 

R041-GR 96-Reversable Rack mit Deckel grün/ 1 Stück 8,70 

R041-Y 96-Reversable Rack mit Deckel gelb/ 1 Stück 8,70 

BestRacks, 64 und 96 Plätze 

Die doppelseitigen BestRacks sind aus stabilem Polypropylen 

gefertigt und können mit 0,5ml oder 1,5/2,0ml 

Mikrozentrifugengefäßen wechselseitig bestückt werden. Die Racks 

sind autoklavierbar, die alphanumerische Kodierung und das 

Schriftfeld vereinfachen die Probenzuordnung. Für die Lagerung von 

Proben bis -80°C sind transparente Deckel lieferbar. Die Racks sind 

in zwei Versionen (64 oder 96 Plätze) in neon-Farben oder natur 

erhätlich. Abmessungen: 64 Rack: 13,1 x 13,4 x Höhe 4,2 oder 

5,0mm(2 Deckelpositionen) 96 Rack: 11,8 x 21,3 x Höhe 4,7 oder 

4,9mm(2 Deckelpositionen) 

Kat. # Anzahl Plätze Pack.einheit/ Farbe Euro 


R007 64 5 Racks natur 30,90 








R008 

Deckel für 64 

Rack 

1 Deckel natur 2,95 


R010 96 5 Racks natur 44,80 






R011 

Deckel für 96 

Rack 

1 Deckel natur 3,70 

PCR-Rack, 96 Well mit anhängendem, abnehmbaren Deckel 

Ein autoklavierbares Polypropylen Lager- und Arbeitsrack für 

0,2ml Tubes, 8 oder 12 Tube Streifen. Der anhängende Deckel 

ist abnehmbar, die Plätze der Tubes sind nach unten offen, um 

die PCR-Tubes im Eisbad während der Probenvorbereitung 

kühlen zu können, eingedrucktes alphanumerisches 

Identifizierungssystem; verfügbar in Packungseinheiten zu 5 

naturfarbig oder farbig gemischt (blau, grün, pink, gelb, 

orange). 


R040-N PCR-Rack,natur 5 25,95 

R040-A PCR-Rack,farbig 5 25,95 

R040-B PCR-Rack,blau 1 5,50 

R040-G PCR-Rack,grün 1 5,50 

R040-Y PCR-Rack,gelb 1 5,50 




Seite 1: Platz für 168 x 0,2ml Tubes (auch in Strip-Form) und 12 x 

1,5ml Tubes 

Seite 2: Platz für 40 x 0,5ml und 12 x 1,5ml Tubes 

anhängender Deckel kann an beiden Seiten eingerastet werden 

Kat.# Beschreibung Farbe/ Menge Euro 

R044-1 96-Rev. Rack mit Deckel natur/ 1 Stück 12,80 

R044 96-Rev. Rack mit Deckel natur/ 5 Stück 54,80 

R044-A 96-Rev. Rack mit Deckel farbig/ 5 Stück 54,80 



Füllvolumen 55ml, V-förmiger Boden zur nahezu kompletten 

Entleerung aus klarem PVC. 




Die PCR Workstation bietet in sinnvoller Anordnung Platz für 

Reaktionsgefäße verschiedener Volumina. Das kombinierte Rack ist 

besonders für die Vor- oder Nachbereitung der PCR geeignet, da 

alle benötigten Gefäße platzsparend untergebracht werden können. 

Die Workstation besteht aus einem Basisrack mit folgenden 

Kapazitäten:24 x 1,5/2,0ml , 16 x 0,5ml Tubes und 32 x 0,2ml 

Tubes. Auf die Fläche der 0,2ml Tubes kann in die Führungsschiene 

das Satelittenrack ( Kat.# R028-S ) mit 8 x 12 Reihen für 0,2ml 

Tubes, oder 8 Streifen oder 1 Matrixplatte eingefügt werden. Die 

Workstation kann bis zu Temperaturen von -80°C eingesetzt 

werden. Die Plätze sind alphanummerisch gekennzeichnet. 


R028-B Neon blau 1 19,95 

R028-G Neon grün 1 19,95 



R028-O Neon orange 1 19,95 

R028-P Neon pink 1 19,95 

R028-Y Neon gelb 1 19,95 

R028-S Sat.Rack m.Deckel 5 racks neon mix 37,90 

VariStänder 

Ein universell einsetzbares doppelseitig verwendbares Rack aus Polypropylen 

mit alphanumerischer Kennzeichnung, autoklavierbar sowie gefrierfähig bis 

–80°C Lieferung inklusive Deckel. Maße: 168 x 82 x 50mm ( LxBxH inklusive 

Deckel) Steckplätze: 1.Seite: 32 x 1,5/2,0ml + 8 x 0,5ml Tubes 2.Seite: 32 x 

0,5ml * 8 x1,5/2,0ml Tubes Farben: blau – grün –orange – pink - gelb 


R43 5 natur 49,90 

R43-A 5 farbig gemischt 59,90 

Latex- Laborhandschuhe 

weiche, komfortabel zu tragende Latexhandschuhe 

hohe Festigkeit und bestes Finger-Feingefühl 

Rollrand schützt zusätzlich vor ablaufenden Flüssigkeiten 

puderfrei, naturfarben, Länge: 24cm 

MLG-XS Latex puderfrei extra klein 59,00 

MLG-S Latex puderfrei klein 59,00 

MLG-M Latex puderfrei mittel 59,00 

MLG-L Latex puderfrei groß 59,00 

Nitril-Laborhandschuhe 



Unsere weichen violetten Nitrilhandschuhe sind sehr komfortabel zu tragen, 

wobei sie hohe Festigkeit und bestes Finger-Feingefühl gewähren. Die 

Nitrilhandschuhe sind resistent gegen Chemikalien wie Acrylamid und Ethidium 

Bromid, welches in vielen Labors zur Gelfärbung eingesetzt wird. 

Latexhandschuhe gewähren nicht die Sicherheit gegenüber Ethidium Bromid, 

da es in weniger als 1 Minute das Latex passiert. Der Rollrand schützt 

zusätzlich vor ablaufenden Flüssigkeiten. 

Die Handschuhe sind: - Puderfrei: keine Kontamination Ihrer Proben mit Puder 

Latexfrei: keine Manifestierung von Latexallergien 

Proteinfrei - Resistent gegen viele Chemikalien und Lösungsmittel 

Länge: 24cm 

Packungseinheit: 10 Boxen á 100 Handschuhe 


MNG-SS-S Nitrilhandschuhe SafeSkin klein 149,95 

MNG-SS-M Nitrilhandschuhe SafeSkin mittel 149,95 

MNG-SS-L Nitrilhandschuhe SafeSkin groß 149,95 

MNG-NT-S Nitrilhandschuhe Nitratex klein 118,00 

MNG-NT-M Nitrilhandschuhe Nitratex mittel 118,00 

MNG-NT-L Nitrilhandschuhe Nitratex groß 118,00 

Neu: Objektträgerkästen farbig, für 100 Objektträger 

Die Objektträgerkästen weisen im Boden eine Korkeinlage zum Schutz der 

Objektträger, im Deckel eine korrespondierende nummerierte Inventurkarte 

auf. Die stapelbare Polypropylenbox wird durch einen vernickelten 

Clipverschluss verschlossen. Abmessungen 222 x 171 x 33mm ( LxBxH ) 

Kat.# Farbe Pack.einheit Euro 

R100-B blau 1 5,95 

R100-G grün 1 5,95 

R100-Y gelb 1 5,95 

R100-R rot 1 5,95 

R100-W weiss 1 5,95 

R100-GRA grau 1 5,95 

R100-SCH schwarz 1 5,95 



Edelstahl Schrankgestelle für Objektträgerboxen Typ R100 

Passende Edelstahlgestelle für unser Objektträgerkästen 

Kat.# Anzahl der Boxen B x L x H in mm Euro 









Einbettkassetten für die Histologie 

Unsere Einbettkassetten sind geeignet z.B zur Paraffin-Einbettung 

von Gewebeschnitten. Die Kassetten sind an den Seitenteilen gut 

beschriftbar und lösungsmittelbeständig. Wir bieten die Kassetten in 

sieben verschiedenen Farben an, weitere Farben auf Anfrage. 

Biopsiekassette Unterteil und Deckel fein gelocht 

Universalkassette Unterteil und Deckel geschlitzt 

Standardkassette ohne Deckel, grob gelocht 

Lieferung VE zu 500 Stück 

Kat.# Kassettentyp Farbe Euro 

HBK-W Biopsie weiß 39,95 

HBK-RA Biopsie rosa 39,95 

HBK-G Biopsie grün 39,95 

HBK-Y Biopsie gelb 39,95 

HBK-B Biopsie blau 39,95 



HBK-R Biopsie rot 39,95 

HBK-GRA Biopsie grau 39,95 

HUK-W Universal weiß 39,95 

HUK-RA Universal rosa 36,95 

HUK-G Universal grün 36,95 

HUK-Y Universal gelb 36,95 

HUK-B Universal blau 36,95 

HUK-R Universal rot 36,95 

HUK-GRA Universal grau 36,95 

HSK-W Standard weiß 26,95 

HSK-RA Standard rosa 26,95 

HSK-G Standard grün 26,95 

HSK-Y Standard gelb 26,95 

HSK-B Standard blau 26,95 

HSK-R Standard rot 26,95 

HSK-GRA Standard grau 26,95 

Stift für Lichtmikroskopie und Immunchemie, PAP PEN 

Der Stift erzeugt eine wasserabweisende 

Barriere und hält Proben/Antikörper etc. 

innerhalb der gekennzeichneten Fläche. Der 

Pap Pen ist einsatzfähig für PAP-, ABC-, BSA- 

, Immunfluoreszensmethoden sowie DNA- 

Techniken. Die Markierung ist wasser-, alkohol- 

, acetonfest und temperaturunempfindlich. 

Pap Pen stoppt Probenausbreitung reduziert 

die Probenmenge 

teilt Objektträger in individuelle Sektionen für 

Immunfärbungen 

Histologie, Zytologie, Virologie und 

Mikrobiologie 



MKP-2 

Pap Pen Immunostaining Pen, extra 

thick 

58,90 








P.O. Box 1329 


Germany 




phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 





an ideal tool by working with PCR-reagents, enzymes and other temperature 

sensitive substances on the bench 





Ice Cool Buckets are constructed of durable plastic and offer 

both robustness and long life. They are durable skinned to 

provide long term storage of ice. In addition they are easily 

cleaned and their lips ensure easy handling. Fitting to the 

buckets are available acrylracks for the handling of 

microtubes in the ice. 

dimensions: KR-ICL: upper lipp 185x185mm, base 

100x100mm, depth 175mm 


Cat. #. description Euro 

KR-ICL ice cool bucket 4 Liter 59,00 

KR-ICS ice cool bucket 1,4 Liter 49,00 


KR IC16 Rack for 16 x 0,5/16 x1,5ml tubes 34,00 




file:///F|/Kisker/Kisker/rack_d.htm (1 von 12) [08.12.2005 22:32:49]


Acryl-racks for 50ml Falcon-tubes or tubes 

up to 29mm diameter 

Acryl-racks for 1,5 and 2,0ml microtubes or 

bis 10,7mm diameter 

Cat. #. Description outer dimensions mm Euro 





Pipettorstand 



material: easy to clean, 3mm thick acryl 

outer dimension: 20 x 12 x 10cm w x h x d 


R048 Pipettorstand, 4 places 1 31,90 

Tube Racks 

These racks made from autoclavable polypropylen are ideal 

for storage and drying of tubes are glas plates for 

electrophoresis 

they can also be used in a waterbath and drainage holes will 

cause racks to sink 

Cat. # places dimensions Euro 

R049-50 50 tubes 14-17mm 178x95x63 mm LxWxH 9,90 

R049-80 80 tubes 10-13mm 228x89x60mm LxWxH 8,90 



Combi-Rack 

The 4-way rotatable Combi Rack is designed to accept a variety of 

tube sizes. The rack may be used place saving on a bench top or 

under a hood. It is manufactured from polypropylen and can be 

autoclaved or stored in a freezer up to -80°C. The racks can be fitted 

together on the flat sides, to get a higher number of storage 

possibilities. For better identification of the samples, the places are 

coded numerically. Following tubes can be placed: 


32 x 12 x75 mm tubes or 32 x 1,5/2,0ml tubes or 32 x 0,5 ml tubes 


R001 neon mix 5 racks 39,90 

R001-B neon blue 1 rack 9,45 

R001-GR neon green 1 rack 9,45 

R001-GE neon yellow 1 rack 9,45 

R001-O neon orange 1 rack 9,45 

R001-P neon pink 1 rack 9,45 


Based on the popular Combi Rack prinziple it has a bigger dimension (100 x 

100 x 200mm) 



* 20 x 20mm Ø tubes 


* 40 x 1,5/2,0ml tubes (13mm Ø) 






The Tube Cube System is also a 4-way rack consisting of 4 independent 

cubes, placed in a clear support tray. It is made of polypropylen and can be 

used in a freezer and be autoclaved. Each rack can be rotated indepently and 

following tubes can be accommodated in each rack: 

15ml und 50ml conical tubes 





1,5ml und 2,0 ml centrifuge tubes 


R002 Neon mixed 4 Racks in tray 49,95 


These very often used racks are ideal for storage, inventory and bench 

top work rack for 1,5ml and 2,0ml tubes. Made of durable polypropylen, 

it can be autoclaved and stored down to -80°C. The 80 sample wells 

have a conical shape to concentrate samples collected directly into the 

rack. Each rack has a frosted labeling area and the wells, positioned in 

5 rows with 16 places are numerical coded for easy identification. With 

use of the clear lids (R004), the racks can be stacked easy. 

Cat. # Description / Color Pack size Euro 

R003 Racks natural 5 racks 19,20 

R003-1 Racks natural 1 rack 4,10 

R003-A Racks neon mix 5 racks 19,90 

R003-FB Rack neon blue 1 rack 4,10 

R003-FG Rack neon green 1 rack 4,10 

R003-FO Rack neon orange 1 rack 4,10 

R003-FP Rack neon pink 1 rack 4,10 

R003-FY Rack neon yellow 1 rack 4,10 


Made from autoclavable polypropylene, numericale places, 2 rows 

with 10 places each 






cat.# Description / Color Pack size Euro 

R046-B TwoRow Rack, blue 1 rack 4,10 

R046-R TwoRow Rack, red 1 rack 4,10 

R046-W TwoRow Rack, white 1 rack 4,10 

96-Well Reversable Rack with snap in place lid for 0,5ml & 1,5/2,0 ml 

Tubes 

A user-friendly work and storage rack for 96 x 1,5/2,0ml 

tubes on one side & 96 x 0,5ml tubes on the other side. 

Made from autoclavable Polypropylene with longer 

handels, alpha numeric coding at the wells, labeling area 

on the lid. Colored pack includes blue, green, pink, 

yellow, orange 

Cat. # Description Color/ quantity Euro 

R041-1 96-Rev.Rack w.Lid natural/ 1 rack 8,70 

R041 96-Rev.Rack w.Lid natural/ 5 pack 42,90 

R041-A 96-Rev.Rack w.Lid colored/ 5 pack 43,90 

R041-B 96-Rev.Rack w.Lid blue/ 1 rack 8,70 

R041-GR 96-Rev.Rack w.Lid green/ 1 rack 8,70 

R041-Y 96-Rev.Rack w.Lid yellow/ 1 rack 8,70 


These double sided racks are made from durable polypropylen. The 

wide spacing allows easy handling and storage on one side of 64/96 

x 1,5/2,0ml tubes, on the reverse side of 64/96 x 0,5ml.The racks are 

autoclavable,identification of samples is easy through the alphanumerical 

coding and the frosted writing area on the sides. Available 

as option is a transparent lid for storage or mixing tubes placed in the 

rack. 

Dimensions: 64 place Rack: 13,1 x 13,4 x 4,2 or 5,0cm (WxLxH, 2 lid 

positions) 

96 place Rack: 11,8 x l2,3 x 4,7 or 4,9cm ( WxLxH, 2 lid positions) 

Cat. # No. of places Pack size/ Color Euro 




















Autoclavable polypropylene rack for storage or working with 

0,2ml Tubes, 8 or 12 tube strips. Removable hinged lid, open 

wells for placing in ice bath, imprinted alpha-numerical system. 

Available in packs of 5 natural or colored (blue, green, pink, 

yellow, orange). 

Cat.# description quantity Euro 

R040-N PCR-Rack,natural 5 25,95 

R040-A PCR-Rack,colored mix 5 25,95 

R040-B PCR-Rack,blue 1 5,50 

R040-G PCR-Rack,green 1 5,50 

R040-Y PCR-Rack,yellow 1 5,50 




A reversable polypropylene rack with a simple to use removable 

hinged lid, that snaps in place on both sides 

Side 1: places for 168 x 0,2ml tubes (also for tubes in strip-form) and 

12 x 1,5ml tubes 

Side 2: places for 40 x 0,5ml and 12 x 1,5ml tubes 

Cat.# description Color/ Quantity Euro 

R044-1 96-Rev. Rack mit Deckel natural/ 1 rack 12,80 

R044 96-Rev. Rack mit Deckel natural/ 5 racks 54,80 

R044-A 96-Rev. Rack mit Deckel colored/ 5 racks 54,80 



fillingvolume 55ml, angeled sides and V-shaped bottom for nearly 

complete sample withdrawal offered in clear PVC non-sterile 

Cat.# description Pack size Euro 



The PCR Workstation offers places for all tubes, needed for pre or 

post PCR applications. The PCR Workstation is a combination of a 

basic rack, which accepts 24 x 1,5/2,0ml tubes, 16 x 0,5ml tubes und 

32 x 0,2ml tubes and a 96 place "Satelite" rack, which clips onto the 

workstation (over the existing 0,2ml holes). This "Satelite" rack 

accomodates all 0,2ml PCR tube configurations, like single tubes, 8strip-tubes, 

12-strip tubes and PCR plates. All tube wells of the racks 

have an alpha-numeric identification system. The PCR Workstation 

can be used at temperatures down to -80°C. The "Satelite" racks is 

available also in packs of 5 separately without the PCR-Workstation. 



R028-G neon green 1 19,95 





R028-Y neon yellow 1 19,95 

R028-S Satelite rack w.Lid 5 racks neon mix 37,90 

VariRack 

This rack is designed as the name suggests. It offers a combination of storage 

solutions in a single rack. The rack is made from polypropylen, autoclavable, 

freezable to -80°C and features an alphanumeric coding. It is supplied 

including lid and has following dimensions: 

168 x 82 50mm ( LxWxH including lid) 

stores following tubes:1.side:32 x 1,5/2,0ml + 8 x 0,5ml 

2. side:32 x 0,5ml + 8 x1,5/2,0ml 

Cat. # Pack.unit Euro 



Latex Disposable Gloves 

Our gloves are very comfortable soft blue nitrile gloves, which 

provide a highly sensitive touch with extreme puncture. 



length: 24cm 


MLG-XS Latex powderfree extra small 59,00 

MLG-S Latex powderfree small 59,00 

MLG-M Latex powderfree medium 59,00 

MLG-L Latex powderfree large 59,00 




Our gloves are very comfortable soft blue nitrile gloves, which provide a highly 

sensitive touch with extreme puncture. They are extremly resistant against 

chemicals , especialy acrylamide and ethidium bromide which is used in many 

labs for gel staining procedures.Latex gloves do not provide saftey against 

ethidium bromide, because it passes latex in less than 1 minute. 






- length: 24cm 


Cat. # Description size Euro 

MNG-SS-S Nitrile Gloves SafeSkin small 149,95 

MNG-SS-M Nitrile Gloves SafeSkin medium 149,95 

MNG-SS-L Nitrile Gloves SafeSkin large 149,95 

MNG-NT-S Nitrile Gloves Nitratex small 118,00 

MNG-NT-M Nitrile Gloves Nitratex medium 118,00 

MNG-NT-L Nitrile Gloves Nitratex large 118,00 


The slide boxes have cork liming on the bottom, to protect the slides. On the 

inside cover of the box is a corresponding inventory slide sheet. The boxes 

can be stored securely on top of each other and are closed with a rust 

resistant nickel plated clasp ande hinge pin.Dimensions are 222 x 171 x 

33mm ( LxWxH ) 

Optional we offer stainless steeel freezer racks to store the slide boxes in 

upright freezers for longtime storage of temperature sensitive samples. You 

find infos and prices in the chapter CRYO PRODUCTS. 


R100-B blue 1 5,95 

R100-G green 1 5,95 

R100-Y yellow 1 5,95 

R100-R red 1 5,95 

R100-W white 1 5,95 

R100-GRA grey 1 5,95 




Stainless steel racks for Upright freezer 

These racks are made to store our slideboxes into upright freezer 

under deep temperature conditions. 

Cat.# number of boxes 

OSG-5/2 5 high x 2 deep 









file:///F|/Kisker/Kisker/rack_d.htm (10 von 12) [08.12.2005 22:32:49] 

W x L x H in 

mm 

187 x 466 x 

189 

187 x 466 x 

227 

187 x 466 x 

264 

187 x 466 x 

302 

187 x 688 x 

189 

187 x 688 x 

227 

187 x 688 x 

264 

187 x 688 x 

302 

Euro 

190,00 

218,00 

248,00 

280,00 

209,00 

245,00 

280,00 

315,00


The embedding cassettes are useful for paraffin-embedding of 

histological cuts. The cassetts are easy to write on the side and are 

resistant to solvents and decalcifying agents.We offer them in seven 

different colors 




packaging unit: 500 cassettes 

Cat.# type of cassette color Euro 

HBK-W Biopsy white 39,95 

HBK-RA Biopsy pink 39,95 

HBK-G Biopsy green 39,95 

HBK-Y Biopsy yellow 39,95 

HBK-B Biopsy blue 39,95 

HBK-R Biopsy red 39,95 

HBK-GRA Biopsy grey 39,95 

HUK-W Universal white 39,95 

HUK-RA Universal pink 36,95 

HUK-G Universal green 36,95 

HUK-Y Universal yellow 36,95 

HUK-B Universal blue 36,95 

HUK-R Universal red 36,95 

HUK-GRA Universal grey 36,95 

HSK-W Standard white 26,95 

HSK-RA Standard pink 26,95 

HSK-G Standard green 26,95 

HSK-Y Standard yellow 26,95 

HSK-B Standard blue 26,95 

HSK-R Standard red 26,95 

HSK-GRA Standard grey 26,95 

PAP PEN 





















MKP-2 


extra thick 


58,90 





P.O. Box 1329 


Germany 



Parafilm M 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Parafilm is a soft, waterproof, halftransparent ilm for Laboratory use to close 

tubes and vessels. Parafilm does not smell, resistant against alkohol, acids 

and basic fluids in week concentrationes 


Cat. # Description Dimensions Euro 




Labels precutted for tubes 0,2 - 2,0ml, convenient to use, simply 

write on the label, peel of from the backing paper and press into 

position on the tube. Temperature resistant from -196°C to 121°C. 

Quali - stickers adhere to all plastics, th 

Cat. # Size For tubes Pack size Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 29,00 

HK-95-L 9,5 mm Ø for Laserprint 3840 119,00 

HK-13-L 13 mm Ø for Laserprint 3840 119,00 

HK-L 32,5 x 13 mm for Laserprint 2040 67,95 

file:///F|/Kisker/Kisker/centrifuge_d.htm (1 von 13) [08.12.2005 22:32:52]


Tough-Tags Labels for Microcentrifuge tubes 

Tough-Tags labels made from polyester are designed for all types of 

microcentrifuge tubes or other plastic vessels. The labels are available in 

different colors and usable up to -20°C 

Packaging unit: 1000 Labels/Roll 

Cat. # Color Size for Tubes Euro 


HKTT-05-W white 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-R red 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-Y yellow 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-B blue 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-G green 24 x 12,5 mm 0,5 ml 41,70 


HKTT-1.5-W white 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-R red 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-Y yellow 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-B blue 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-G green 32 x 12,5 mm 1,5/2,0 ml 42,50 

Quali - "Low Retention" Microcentrifuge Tubes ( formerly Siliconized 

Tubes ) 

Those clear Low Retention" tubes are replacing the 

formerly produced siliconized microcentrifuge tubes. 

These tubes feature extremly low adhesion for optimal 

recovery of samples. Through a new polymer 

technology there are no silicons or lubricans added. 

1-9 pcks 10-19pck 20+ pcks 

Cat. # Volume Pack size Euro Euro Euro 

G016 0,6ml 1000(2x500) 30,20 28,60 27,15 

G017 1,7ml 500(2x250) 18,40 17,55 16,55 

G018 2,0ml 250 14,90 14,55 14,00 




Our microcentrifuge tubes are made from 99,9% 

pure polypropylen without fillers or heavy metals. 

Our colorants do not contain any metallic ion, not 

even the usual iron, chromium or nickel used in 

dyes. The microcentrifuge tubes do resist 20.000xG 

force, h 



G051-1 0,6ml / clear 1x1000 24,70 23,90 

G051 0,6ml / clear 10x1000 232,00 219,00 210,00 

G052-1 1,7ml / clear 1 x 500 11,85 11,40 

G052 1,7ml / clear 10 x 500 110,00 102,00 98,00 

G052-A 

1,7ml / colored 

mixed 

1 x 500 12,95 12,10 

G052-B 1,7ml / blue 10 x 500 123,20 117,60 111,95 

G052-G 1,7ml / green 10 x 500 123,20 117,60 111,95 

G052-R 1,7ml / ret 10 x 500 123,20 117,60 111,95 

G052-O 1,7ml / orange 10 x 500 123,20 117,60 111,95 

G052-V 1,7ml / pink 10 x 500 123,20 117,60 111,95 

G052-Y 1,7ml / yellow 10 x 500 123,20 117,60 111,95 

G052BP 

G053BP 

1,5ml / clear / 

BoilProof 

2,0ml / clear / 

BoilProof 

1 x 500 11,80 11,40 10,90 

1 x 500 14,90 13,90 12,90 







G051-S 0,6ml/clear/steril 5x100 19,80 19,00 18,10 

G052-S 1,7ml/clear/steril 5 x 50 12,50 11,70 10,90 

G053-S 2,0ml / clear/steril 5 x 50 15,90 14,90 13,90 




tubes useful for deep temperature storage up to -196°C (gasphase) 


0,5ml tube freestanding with place for labeling 

1-9 VE 10-19 VE 20+ pcks 

Cat. # Volumen / color Pack.unit Euro Euro Euro 




CP-AM caps 500 39,90 38,50 36,40 


made from PP, mostly chemical- and temperature resistant, flat, pierable, easy to 

handle and shut tightly lid 

1 Unit 6-11 Units 11+ Units 

Cat. # Volume / Color Pack.Unit Euro Euro Euro 

G056 0,5ml / clear 1 x 1000 15,00 14,00 

G056-10 0,5ml / clear 10 x 1000 128,00 117,00 102,00 

G054 1,5ml / clear 1 x 1000 14,00 13,00 

G054-10 1,5ml / clear 8 x 1000 109,00 94,00 89,90 



G054-B 1,5ml / blue 8 x 1000 109,00 94,00 89,90 

G054-G 1,5ml / green 8 x 1000 109,00 94,00 89,90 

G054-R 1,5ml / ret 8 x 1000 109,00 94,00 89,90 

G054-Y 1,5ml / yellow 8 x 1000 109,00 94,00 89,90 

G055 2,0ml / klar 8 x 1000 14,00 13,00 

G055-8 2,0ml / klar 8 x 1000 109,00 94,00 89,90 


The capless tubes have same features as our microcentrifuge tubes and are 

DNase-, RNase,- pyrogen- and metal free. 

1-9 packs 10-19pck 20+pck 




Quali - Screw Cap Tubes 

Quali - Screw Cap Tubes serve a broad range of laboratory needs, 

including collection, processing, centrifugation, long term storage and 

OEM packaging, shipping of restriction enzymes or other DNA/RNA 

modifying enzymes. The threaded "O"-ring des 


Cat. # Form Volume / Color Euro Euro 















Quali - "True-Lock“ Tubes 

True Lock provides a simple and safe security for your samples. The locking 

system prevents the cap coming open. 

Cat.# Description Volume Pack. Unit Euro 

G013 True-Lock 1,5 ml 1000 26,90 

Quali - Centrifuge tubes 15 und 50ml - steril 

transparent Polypropylen with blue Screw cap 

conical bottom 

graduated 

Cat. # Volumen/dimension Pack.unit Euro 







Made from transparente polypropylen with screw cap, the 30ml tubes are 

graduated. 

Cat. # Volumen/dimension Pack.Unit Euro 

G100 13ml/ 16 x 100mm 1000 59,90 


G106 15ml/ 20 x 76mm 1000 81,90 


G107 30ml/ 25 x 107mm 500 89,00 



Cat. # Volumen/dimension Unit / Form Euro 

G101 12ml/ 16 x 100mm 1000 / cylindric 25,40 

G102 13ml/ 16 x 105mm 1000 / conical 26,50 


G104 20ml Diluter Tube/22x62mm 1000 / flatt bottom 31,90 



Cat. # dimension Unit Euro 



G109 16mm 1000 16,90 

G110 12mm 1000 13,90 


A self adhesive writing tape for sample identification or signing of accessories 

in the Lab. 

Advantages: widstanding manifold autoclaving ( +121°C ) 

deep temperature resistant up to -23°C 

to use with most pens 


LT-54W white 19,1mm x 54m 10,50 



LT-54BL blue 19,1mm x 54m 10,50 

LT-54RO red 19,1mm x 54m 10,50 



LT-54RH holder for rols 1 73,95 


Dust- and partikel free 25 ml tubes made from optical clear polystyrene, tight 

lid, parallele viewing areas, writing area 

Cat. # Volume 

Euro / 250 

Stück 

G108 25ml 15,00 45,00 

Euro / 1000 

Stück 



file:///F|/Kisker/Kisker/centrifuge_d.htm (8 von 13) [08.12.2005 22:32:52] 

Euro / 1000 tubes 

Euro / 2000 tubes


Clear polypropylene with screw cap, rounded bottom for complete 

sample deloading, freestanding resistant to formaldehyde mit 

Stehrand 

Cat. # Volume / Dimension(WxH) Pack unit Euro 

G111 20ml/ 27 x 48mm 1000 95,00 

G112 35ml/ 34 x 55mm 500 55,00 

G113 50ml/ 34 x 75mm 500 68,00 

G114 100ml/ 43 x 88mm 250 44,90 

Centrifugetubes for High Spped Rotors 

useful for preparative centrifugation, proteinpurification, extraction, density 

gradient centrifugation, centrifugation of biohazard materiales. Lids on request. 

Kat # Vol./Material Dimension mm Pack unit Euro 

HR-PA-10 10ml/ PA/ 24.000 16x80 10 49,50 

HR-PC- 

10 

10ml/ PC/ 24.000 16x80 10 49,50 

HR-PE-10 10ml/ PE/ 18.000 16x80 10 48,00 

HR-PF-10 10ml/ PF/ 20.000 16x80 5 71,50 

HR-PP-10 10ml/ PP/ 24.000 16x80 10 48,00 

HR-B-30 30ml/ B/ 5.000 24x105 10 129,00 

HR-PC- 

30 

30ml/ PC/ 24.000 25x92 10 68,00 

HR-PP-30 30ml/ PP/ 24.000 25x92 10 48,00 

HR-PA-30 30ml/ PA/ 24.000 25x92 10 49,50 

HR-PE-30 30ml/ PE/ 10.000 25x92 10 48,00 

HR-PF-30 30ml/ PF/ 24.000 25x92 5 141,00 

HR-PA-50 50ml/ PA/ 20.000 29x103 10 72,70 



HR-PC- 

50 

50ml/PC/ 24.000 29x103 10 72,90 

HR-PE-50 50ml/PE/ 20.000 29x103 10 62,50 

HR-PF-50 50ml/PF/ 20.000 29x103 5 157,00 

HR-PP-50 50ml/PP/ 20.000 29x103 10 72,70 

HR-PA-80 80ml/PA/ 20.000 38x105 10 78,00 

HR-PC- 

80 

80ml/PC/ 20.000 38x105 10 89,00 

HR-PE-80 80ml/PE/ 12.000 38x105 10 74,00 

HR-PF-80 80ml/PF/ 15.000 38x105 5 137,80 

HR-PP-80 80ml/PP/ 20.000 38x105 10 82,90 

HR-PA- 

250-FB 

HR-PC- 

250-FB 

HR-PE- 

250-FB 

HR-PP- 

250-FB 

HR-PA- 

250-RB 

HR-PC- 

250-RB 

HR-PE- 

250-RB 

HR-PP- 

250-RB 

HR-PA- 

500 

HR-PC- 

500 

HR-PE- 

500 

HR-PP- 

500 

250ml/PA/ 14.400 62x120, Flat bottom 6 69,00 

250ml/PC/ 14.400 62x120, Flat bottom 6 69,70 

250ml/PE/ 13.500 62x120, Flat bottom 6 49,80 

250ml/PP/ 14.400 62x120, Flat bottom 6 61,40 

250ml/PA/ 14.400 62x120, Round bottom 6 81,90 

250ml/PC/ 14.400 62x120, Round bottom 6 82,90 

250ml/PE/ 12.000 62x120, Round bottom 6 69,00 

250ml/PP/ 14.400 62x120, Round bottom 6 69,80 

500ml/PA/ 9.000 70x165 6 74,80 

500ml/PC/ 9.000 70x165 6 94,50 

500ml/PE/ 9.000 70x165 6 79,80 

500ml/PP/ 9.000 70x165 6 69,80 



Material 

B - Borex Glass? PA - Polyallomer PF - Polyflor? 

direct fitting to 

PC - Polycarbonate PP - Polypropylene 

PE - Polyethylene 


30 ml Sigma 12158, in 50ml rotors by adapter 

50 ml 

80 ml 

250 ml 

Sigma 12156/12150, Kontron A8.24/A12.17/AS 4.13/AS 4.7, Beckman JA-20/JS-13/JA- 

17/JS-7,5, Sorvall SS-34/SA-600/HB-4/HS-4 

Kontron A 8.20+AS 4.13-2+AV 8.19, Sorvall GSA+ HS4, Beckmann JA-18+JS-13, 

Sigma 12159+12155, Herolab AFH 6.180 

Kontron A6.14+AS 4.7+AS4.4, Sigma 12254, Beckman JA-14+JS-7.5, Herolab AFH 

4.090 



Cat. # previous 

Kontron # 

UZ-PC- 

2 

UZ-PA- 

2 

UZ-PA- 

4,4 

UZ-PC- 

4,4 

UZ-PC- 

4,4 

UZ-PA- 

5-1 

UZ-PA- 

5-2 

UZ-PA- 

6,5-2 

91-90289 

material 

PCthickwall 

nominal 

Vol.ml 

Filling- 

Vol.ml 

size mm Max.rpm 

gefüllt 

VE Euro 

2 0,6 08x51 45.000 50 121,60 

91-90288 PA-dünnw. 2 1,3 08x51 80.000 50 104,90 

91-90212 PA-dünnw. 4,4 3,3 11x60 80.000 50 98,50 

91-90214 

91-90275 

PCthickwall 

PCthickwall 

4,4 2,2 11x60 50.000 50 157,40 

4,4 2,7 11x60 50.000 50 272,60 

91-90219 PA, thinnw. 5 5 13x51 55.000 50 98,50 

91-90224 

91-90228 

PCthickwall 

PCthickwall 


5 3,4 13x51 55.000 50 157,40 

6,5 2,8 13x64 35.000 50 104,90


UZ-PA- 

6,5-1 

UZ-PC- 

6,5 

UZ-PC- 

6,5-2- 

G 

UZ-PA- 

13,2 

UZ-PA- 

14 

UZ-PC- 

14 

UZ-PA- 

17 

UZ-PC- 

17 

UZ-PA- 

13,5 

91-90227 PA, thinnw. 6,5 5,8 13x64 45.000 50 98,50 

91-90229 

91-90241 

PCthickwall 

PCthickwall 

w. 

thread 

6,5 2,8 13x64 40.000 50 157,40 

6,5 4,5 13x64 45.000 50 272,60 

91-90221 PA, thinnw. 13,2 11,3 14x89 41.000 50 104,90 

91-90215 PA, thinnw. 14 12 14x95 41.000 50 104,90 

91-90382 

91-90217 

91-90195 

PCthickwall 

PA, 

dünnw. 

PCthickwall 

14 9 14x95 30.000 50 197,00 

17 15,8 16x102 28.000 50 104,90 

17 12,5 16x102 28.000 50 213,70 

91-90202 PA, thinnw. 13,5 11 16x76 80.000 50 104,90 

UZ-PC- 

13,5-2 91-90205 

UZ-PC- 

13,5- 

2G 

UZ-PA- 

38,5-1 

91-90235 

PCthickwall 

PCthickwall 

w. 

thread 

13,5 8,5 16x76 40.000 50 392,90 

13,5 9,5 16x76 40.000 50 197,10 

91-90196 PA, thinnw. 38,5 34 25x89 70.000 50 104,90 

UZ-PC- 

38,5-2 91-90198 

UZ-PA- 

38,5- 

2G 

UZ-PC- 

94-2 

UZ-PC- 

94-2- 

G 

91-90236 

91-90209 

91-90237 

PCthickwall 

PCthickwall 

w. 

thread 

PCthickwall 

PCthickwall 

w. 

thread 


38,5 29 25x89 45.000 50 157,40 

38,5 32,5 25x89 50.000 50 458,20 

94 77 38x102 45.000 25 197,10 

94 88 38x102 40.000 25 262,40







P.O. Box 1329 


Germany 


Quali - Zentrifugengefäße und Etiketten 

Parafilm M 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Parafilm ist eine geschmeidige, wasserdichte, halbtransparente Folie für den 

Laborgebrauch zum Verschliessen von Gefäßen und Röhrchen. Sie ist 

praktisch geruchlos, resistent gegen Alkohol, Säuren und Basen in 

schwachen Konzentrationen 


Kat. # Bezeichnung Abmessung Euro 



Quali - Stickers 'heiss - kalt' 

einsetzbar in Kühlschränken, Cryobehältern ( Flüssigstickstoff bis - 

196°C) und in kochendem Wasser. 

aus chemisch inertem Polyvinyl, verwendbar auf jeder Art von 

Plastik, absolut eng anliegend, d.h. keine Behinderungen in 

Geräteeinsätzen, einfach zu handhaben durch Abziehen von 

vorgeschnittener Rolle mit 1000 weissen Etiketten oder auf Bögen für 

den Einsatz im Laserdruck. 

Kat. # Grösse für Tubes Pack. Einheint Euro 

HK-20 32,5 x 13 mm 1,5/2,0 ml 1000 Stück 29,00 

HK-95-L 9,5 mm Ø für Laserdruck 3840 Stück 119,00 

HK-13-L 13 mm Ø für Laserdruck 3840 Stück 119,00 


file:///F|/Kisker/Kisker/deutsch/centrifuge_d.htm (1 von 13) [08.12.2005 22:32:55]


Tough-Tags Labels für Mikrozentrifugenröhrchen 

Tough-Tags sind Etiketten aus Polyester für Mikrozentrifugen- oder 

andere PlastikGefäße. Die Etriketten sind reißfest, eng anliegend und 

können am Gefäß gekocht oder autoklaviert werden. Auch 

Temperaturen bis -20°C halten sie aus, ohne abzufallen. 

Verschiedene Farben und Abmessungen stehen zu Verfügung. 

Packungseinheit: 1000 Labels/Rolle 

Kat. # Farbe Grösse für Tubes Euro 


HKTT-05-W weiß 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-R rot 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-Y gelb 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-B blau 24 x 12,5 mm 0,5 ml 41,70 

HKTT-05-G grün 24 x 12,5 mm 0,5 ml 41,70 


HKTT-1.5-W weiß 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-R rot 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-Y gelb 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-B blau 32 x 12,5 mm 1,5/2,0 ml 42,50 

HKTT-1.5-G grün 32 x 12,5 mm 1,5/2,0 ml 42,50 

Quali - 'Low Retention' Mikrozentrifugengefäße ( Maxymum Recovery 

Tubes) 

Die transparenten 'Low Retention' Gefäße ersetzen die 

silikonisierten Gefäße und zeichnen sich durch 

besonders glatte Innenoberflächen aus, die eine 

optimale Probenrückgewinnung gewährleisten. Das 

seitliche Beschriftungsfeld sowie die plane 

Deckeloberseite bieten Platz zur Kennzeichnung. Die 

0,6ml & 1,7ml Gefäße können bis zu 20.000xG (2,0ml 

bis 13.000xG) in allen Zentrifugen eingesetzt werden, 

sind voll autoklavierbar und wurden bei 55 psi getestet. 

Die Deckel enthalten eine 0,28mm Durchstechzone 

zum Probentransfer. 

Die Tubes werden in hochpolierten Formen mit einer 

neuen Polymertechnologie ohne den Zusatz von 

Silikon oder Glättungskomponenten produziert. Wie 

auch die anderen Tubes sind sie DNase-, RNase-, 



pyrogen- und Metall frei. 

1-9 VE 10-19 VE 20+ VE 

Kat. # Volumen Pack.einheit Euro Euro Euro 

G016 0,6ml 1000(2x500) 30,20 28,60 27,15 

G017 1,7ml 500(2x250) 18,40 17,55 16,55 

G018 2,0ml 250 14,90 14,55 14,55 

Quali - Mikrozentrifugengefäße, super klar 

Unser Mikrozentrifugengefäße sind aus 99,9% 

hochreinem Polypropylen garantieren perfekte 

Klarheit und Chemikalienresistenz. 

farbige Tubes ohne Metallionen, nicht einmal Eisen, 

Chrom oder Nickel. 

bis zu 20.000xG Force zentrifugierbar, gefrosteten 

Deckel mit 28mm Durchstechzone und seitliches 

gefrostetes Schreibfeld. 

leichtgängiger und absolut dicht schließender 

Verschluß. 

? 1,5 und 2,0ml BoilProof Tubes minimieren das 

Risiko des Aufspringens während Erhitzungsphasen 

Unsere Quali - Mikrozentrifugengefäße sind 

zertifiziert DNase,- RNase-, pyrogen- und Metall frei 

und jetzt auch steril erhältlich. 



G051-1 0,6ml / klar 1x1000 24,70 23,90 

G051 0,6ml / klar 10x1000 232,00 219,00 210,00 

G052-1 1,7ml / klar 1 x 500 11,85 11,40 

G052 1,7ml / klar 10 x 500 110,00 102,00 98,00 

G052-A 

1,7ml / farbig 

gemischt 

1 x 500 12,95 12,10 

G052-B 1,7ml / blau 10 x 500 123,20 117,60 111,95 

G052-G 1,7ml / grün 10 x 500 123,20 117,60 111,95 

G052-R 1,7ml / rot 10 x 500 123,20 117,60 111,95 

G052-O 1,7ml / orange 10 x 500 123,20 117,60 111,95 

G052-V 1,7ml / violett 10 x 500 123,20 117,60 111,95 



G052-Y 1,7ml / gelb 10 x 500 123,20 117,60 111,95 

G052BP 

G053BP 

1,5ml / klar / 

BoilProof 

2,0ml / klar / 

BoilProof 

1 x 500 11,80 11,40 10,90 

1 x 500 14,90 13,90 12,90 

Quali - Mikrozentrifugengefäße, super klar, steril 

gammasterile Mikrozentrifugengefässe in praktischen kleinen 

Unterverpackungen 



G051-S 0,6ml/klar/steril 5x100 19,80 19,00 18,10 

G052-S 1,7ml/klar/steril 5 x 50 12,50 11,70 10,90 

G053-S 2,0ml / klar/steril 5 x 50 15,90 14,90 13,90 

Quali - Amber Mikrozentrifugengefäße 

hergestellt aus biologisch inertem Material 

schützt lichtempfindliche 

Proben geeignet für Tieftemperaturlagerung bis -196°C (Gasphase) 

zentrifugierbar bis 20.00 x g 

0,5ml Gefäß freistehend mit langem Stehrand zur Etikettenplazierung 

1-9 VE 10-19 VE 20+ pcks 





CP-AM Schraubverschlüsse 500 39,90 38,50 36,40 

Value Line Mikrozentrifugengefässe 



Aus hochwertigem PP, weitgehend chemikalien- und temperaturbeständig, flacher, 

durchstechbarer, leichtgängiger und dicht schliessender Deckel 

1 VE 6-11 VE 11+ VE 


G056 0,5ml / klar 1 x 1000 15,00 14,00 

G056-10 0,5ml / klar 10 x 1000 128,00 117,00 102,00 

G054 1,5ml / klar 1 x 1000 14,00 13,00 

G054-10 1,5ml / klar 8 x 1000 109,00 94,00 89,90 

G054-B 1,5ml / blau 8 x 1000 109,00 94,00 89,90 

G054-G 1,5ml / grün 8 x 1000 109,00 94,00 89,90 

G054-R 1,5ml / rot 8 x 1000 109,00 94,00 89,90 

G054-Y 1,5ml / gelb 8 x 1000 109,00 94,00 89,90 

G055 2,0ml / klar 8 x 1000 14,00 13,00 

G055-8 2,0ml / klar 8 x 1000 109,00 94,00 89,90 

Quali - Mikrozentrifugengefäße ohne Deckel 

Die Tubes ohne Deckel weisen gleiche Qualitätsmerkmale auf wie Quali- 

Mikrozentrifugengefäße und sind DNase-, RNase,-Pyrogen-und Metall frei. 

1-9 VE 10-19 VE 20 + VE 

Kat. # Volume / Farbe Pack.einheit Euro Euro Euro 

G044 1,5ml / Klar 500 Tubes 10,75 10,20 9,65 

G045 2,0ml / klar 500 Tubes 12,15 11,55 10,95 

Quali - Mikrozentrifugengefäße mit Schraubverschluß 



Quali - Mikrozentrifugengefäße decken einen weiten Bereich der 

Laboranwendungen wie Probensammlung, Zentrifugation, 

Langzeitlagerung und Verpackung/Versand von z.B. 

Restriktionsenzymen und anderen DNA/RNA modifizierenden Enzymen 

ab. Die Riffelung erlaubt einhändiges Öffnen und Schliessen. Die 

Gefäße sind aus hochreinem, metallfreien Polypropylen gefertigt. Der O- 

Ring ist resistent gegen Chemikalien wie reine Ether, Hexan, Aceton, 

Chloroform, Acetonitril etc.und gewährt absolute Dichtigkeit.Die Gefäße 

haben eine plane Deckeloberfläche mit Durchstechzone zur einfachen 

Kennzeichnung, Identifizierung und Probentransfer. Tests in 

Flüssigstickstoff ergaben keine Veränderungen der Struktur, Dichtigkeit 

und Fexibilität. Die Tubes können bis zu 17.000 x g zentifugiert werden 

und zeichnen sich durch ein patentiertes Ausrichtungssystem aus. 

Dieses Ausrichtungssystem erlaubt den wiederholten Einsatz bei 

gleicher Positionierung in der Zentrifuge ohne Störung der 

Teilsedimente. Quali - Mikrozentrifugengefäße sind zertifiziert DNase- & 

RNase frei und werden steril mit aufgesetztem Deckel in 

Packungseinheiten von je 10 x 50/Beutel = 500 Stück geliefert. Die 

Tubes können auf Anfrage in 10 verschieden Farben geliefert werden, 

Mindestabnahme / Farbe 4.000 Stück. 


Kat. # Form Volumen / Farbe Euro Euro 













Quali - 'True-Lock' Tubes 



True-Lock“ hält Ihre Proben fest verschlossen. Eine Sicherheitslasche am 

Tube rastet im Deckel ein. Ein Aufspringen des Deckels wird auch unter 

Erhitzung der Probe sicher verhindert. Das Tube ist zentrifugierbar, 

graduiert und tiefgefrierfähig. 

Kat.# Bezeichnung Volumen Pack. Einheit Euro 

G013 True-Lock 1,5 ml 1000 26,90 

Quali - Zentrifugenröhrchen 15 und 50ml - steril 

transparentes Polypropylen mit Schraubverschluss 

konischer Boden 

graduiert 





Quali - Zentrifugengefäße / Probenröhrchen 

Transparentes Polypropylen mit naturfarbenem Schraubverschluss, Die 30 

Tubes sind graduiert. 


G100 13ml/ 16 x 100mm 1000 59,90 


G106 15ml/ 20 x 76mm 1000 81,90 


G107 30ml/ 25 x 107mm 500 89,00 




Zentrifugenröhrchen aus Polystyrol, hochtransparent 

Kat. # Volumen/Maße VE / Form Euro 

G101 12ml/ 16 x 100mm 1000 / zylindrisch 25,40 

G102 13ml/ 16 x 105mm 1000 / konisch 26,50 


G104 20ml Diluter Tube/22x62mm 1000 / Flachboden 31,90 


Lamellengriffstopfen, Polyethylen, natur, leichtgängig 

Kat. # Maße VE Euro 

G109 16mm 1000 16,90 

G110 12mm 1000 13,90 

Label - Tape' Markierband 

Ein vielseitiges selbstklebendes Beschriftungsband zur Probenidentifizierung 

bzw. Kennzeichnung von Arbeits- und Hilfsmitteln im Labor. 

Vorteile: widersteht mehrfachem Autoklavieren ( +121°C ) 

kältebeständig bis –23°C 

beschriftbar mit allen gängigen Stiften, rückstandsfrei abziehbar 


LT-54W weiss 19,1mm x 54m 10,50 

LT-54GR grün 19,1mm x 54m 10,50 



LT-54GE gelb 19,1mm x 54m 10,50 

LT-54BL blau 19,1mm x 54m 10,50 

LT-54RO rot 19,1mm x 54m 10,50 




Probengefäss für 'Coulter Counter' 

Staub- und partikelfreie 25 ml Gefässe aus optisch klarem Polystyrol, 

dichtem aber leicht aufsetzbaren Deckel, parallele Sichtflächen, mattiertes 

Beschriftungsfeld, 

Kat. # Volumen 

Euro / 250 

Stück 

G108 25ml 15,00 45,00 

Euro / 1000 

Stück 


Versandgefässe für die Pathologie 

Klarsichtige Polypropylenausführung mit Schraubverschluss, nahtlos 

abgerundeter Boden für vollständige Probenentnahme, 

Formaldehydbeständig mit Stehrand 

Kat. # Volumen/ Maße(BxH) VE Euro 

G111 20ml/ 27 x 48mm 1000 95,00 

G112 35ml/ 34 x 55mm 500 55,00 

G113 50ml/ 34 x 75mm 500 68,00 

G114 100ml/ 43 x 88mm 250 44,90 

file:///F|/Kisker/Kisker/deutsch/centrifuge_d.htm (9 von 13) [08.12.2005 22:32:55] 

Euro / 1000 Stück 

Euro / 2000 Stück


Zentrifugenröhrchen für Hochgeschwindigkeitsrotoren 

Geeignet für präparative Zentrifugation, Proteinreinigung, Extraktionen, 

Dichtegradientenzentrifugation, Zentrifugation von Biohazard Materialien. 

Auf Anfrage erhältlich mit Dichtungsdeckeln. 

Kat # Vol./ Material/ rpm Maße mm VE Euro 

HR-PA-10 10ml/ PA/ 24.000 16x80 10 49,50 

HR-PC-10 10ml/ PC/ 24.000 16x80 10 49,50 

HR-PE-10 10ml/ PE/ 18.000 16x80 10 48,00 

HR-PF-10 10ml/ PF/ 20.000 16x80 5 71,50 

HR-PP-10 10ml/ PP/ 24.000 16x80 10 48,00 

HR-B-30 30ml/ B/ 5.000 24x105 10 129,00 

HR-PC-30 30ml/ PC/ 24.000 25x92 10 68,00 

HR-PP-30 30ml/ PP/ 24.000 25x92 10 48,00 

HR-PA-30 30ml/ PA/ 24.000 25x92 10 49,50 

HR-PE-30 30ml/ PE/ 10.000 25x92 10 48,00 

HR-PF-30 30ml/ PF/ 24.000 25x92 5 141,00 

HR-PA-50 50ml/ PA/ 20.000 29x103 10 72,70 

HR-PC-50 50ml/PC/ 24.000 29x103 10 72,90 

HR-PE-50 50ml/PE/ 20.000 29x103 10 62,50 

HR-PF-50 50ml/PF/ 20.000 29x103 5 157,00 

HR-PP-50 50ml/PP/ 20.000 29x103 10 72,70 

HR-PA-80 80ml/PA/ 20.000 38x105 10 78,00 

HR-PC-80 80ml/PC/ 20.000 38x105 10 89,00 

HR-PE-80 80ml/PE/ 12.000 38x105 10 74,00 

HR-PF-80 80ml/PF/ 15.000 38x105 5 137,80 

HR-PP-80 80ml/PP/ 20.000 38x105 10 82,90 

HR-PA-250- 

FB 

250ml/PA/ 14.400 62x120, Flachboden 6 69,00 



HR-PC-250- 

FB 

HR-PE-250- 

FB 

HR-PP-250- 

FB 

HR-PA-250- 

RB 

HR-PC-250- 

RB 

HR-PE-250- 

RB 

HR-PP-250- 

RB 

250ml/PC/ 14.400 62x120, Flachboden 6 69,70 

250ml/PE/ 13.500 62x120, Flachboden 6 49,80 

250ml/PP/ 14.400 62x120, Flachboden 6 61,40 

250ml/PA/ 14.400 62x120, Rundboden 6 81,90 

250ml/PC/ 14.400 62x120, Rundboden 6 82,90 

250ml/PE/ 12.000 62x120, Rundboden 6 69,00 

250ml/PP/ 14.400 62x120, Rundboden 6 69,80 

HR-PA-500 500ml/PA/ 9.000 70x165 6 74,80 

HR-PC-500 500ml/PC/ 9.000 70x165 6 94,50 

HR-PE-500 500ml/PE/ 9.000 70x165 6 79,80 

HR-PP-500 500ml/PP/ 9.000 70x165 6 69,80 

Material 

B – Borex Glass PA – Polyallomer PF – Polyflor 

Passform: 

PC – Polycarbonate PP – Polypropylene 

PE – Polyethylene 


30 ml Sigma 12158, in 50ml Rotoren mittels Adapter 

50 ml 

80 ml 

250 ml 

Sigma 12156/12150, Kontron A8.24/A12.17/AS 4.13/AS 4.7, Beckman JA-20/JS-13/JA- 

17/JS-7,5, Sorvall SS-34/SA-600/HB-4/HS-4 

Kontron A 8.20+AS 4.13-2+AV 8.19, Sorvall GSA+ HS4, Beckmann JA-18+JS-13, 

Sigma 12159+12155, Herolab AFH 6.180 

Kontron A6.14+AS 4.7+AS4.4, Sigma 12254, Beckman JA-14+JS-7.5, Herolab AFH 

4.090 




Röhrchen für Ultra-Zentrifugen 

Kat. # Frühere 

Kontron # 

UZ- 

PC-2 

UZ- 

PA-2 

UZ- 

PA- 

4,4 

UZ- 

PC- 

4,4 

UZ- 

PC- 

4,4 

UZ- 

PA-5- 

1 

UZ- 

PA-5- 

2 

UZ- 

PA- 

6,5-2 

UZ- 

PA- 

6,5-1 

UZ- 

PC- 

6,5 

UZ- 

PC- 

6,5-2- 

G 

UZ- 

PA- 

13,2 

Material Nomi.Vol.ml Füll- 

Vol.ml 

Maße 

mm 

Max.rpm 

gefüllt 

VE Euro 

91-90289 PC-dickw. 2 0,6 08x51 45.000 50 121,60 

91-90288 PA-dünnw. 2 1,3 08x51 80.000 50 104,90 

91-90212 PA-dünnw. 4,4 3,3 11x60 80.000 50 98,50 

91-90214 PC-dickw. 4,4 2,2 11x60 50.000 50 157,40 

91-90275 

PC, dickw. 

m.G 

4,4 2,7 11x60 50.000 50 272,60 

91-90219 PA, dünnw. 5 5 13x51 55.000 50 98,50 

91-90224 PA, dickw. 5 3,4 13x51 55.000 50 157,40 

91-90228 PA, dickw. 6,5 2,8 13x64 35.000 50 104,90 

91-90227 PA, dünnw. 6,5 5,8 13x64 45.000 50 98,50 

91-90229 PC, dickw. 6,5 2,8 13x64 40.000 50 157,40 

91-90241 

PC, dickw. 

m.G. 

6,5 4,5 13x64 45.000 50 272,60 

91-90221 PA, dünnw. 13,2 11,3 14x89 41.000 50 104,90 



UZ- 

PA-14 

UZ- 

PC-14 

UZ- 

PA-17 

UZ- 

PC-17 

UZ- 

PA- 

13,5 

UZ- 

PC- 

13,5-2 

UZ- 

PC- 

13,5- 

2G 

UZ- 

PA- 

38,5-1 

UZ- 

PC- 

38,5-2 

UZ- 

PA- 

38,5- 

2G 

UZ- 

PC-94- 

2 

UZ- 

PC-94- 

2-G 

91-90215 PA, dünnw. 14 12 14x95 41.000 50 104,90 

91-90382 PC, dickw. 14 9 14x95 30.000 50 197,00 

91-90217 PA, dünnw. 17 15,8 16x102 28.000 50 104,90 

91-90195 PC, dickw. 17 12,5 16x102 28.000 50 213,70 

91-90202 PA, dünnw. 13,5 11 16x76 80.000 50 104,90 

91-90205 PC, dickw. 13,5 8,5 16x76 40.000 50 197,10 

91-90235 

PC, dickw. 

mit Gewinde 

13,5 9,5 16x76 40.000 50 392,90 

91-90196 PA; dünnw. 38,5 34 25x89 70.000 50 104,90 

91-90198 PC, dickw. 38,5 29 25x89 45.000 50 157,40 

91-90236 

PA, 

dickw.m.G. 

38,5 32,5 25x89 50.000 50 458,20 

91-90209 PC, dickw. 94 77 38x102 45.000 25 197,10 

91-90237 

PC, dickw. 

m.G. 


94 88 38x102 40.000 25 262,40 





P.O. Box 1329 


Germany 


Quali - qPCR Kapillaren 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Die qPCR Kapillaen sind einfach zu handhaben, sie sind verpackt 

in 2 StackRacks, ein Rack mit den Kapillaren, ein Rack mit den 

Stopfen. Jede Packung enthält einen Transferstift, der einen 

einfache Handhabung sowie den sicheren Verschluss der 

Kapillaren gewährleistet. Um die Kapillaren einzusetzen, ist ein 

wiederverwendbarer Rotor-Adapter notwendig, der in dem Starter- 

Kit enthalten ist. 

Die transparenten Plastik-Kapillaren weisen gegenüber den 

herkömmlichen Glas-Kapillaren erhebliche Vorteile auf: 

kostengünstg, niedrige Kosten pro Analyse 

unzerbrechlich, vermindert das Risiko von Kreuzkontaminationen 

kein Änderung der Methode nötig bei Einsatz von Plastik-Kapillaren anstelle von Glas- 

Kapillaren, kein Sensivitätsverlust 

höheres Reaktionsvolumen, die Kapillaren können falls erforderlich bis 50 µl 

Reaktionsgemisch aufnehmen, d. h. eine grössere Probenmenge kann die 

Empfindlichkeit erhöhen 

die Probe kann bei Bedarf mit einer 10 µl Pipettenspitze nach der Reaktion 

zurückgewonnen werden 

Die Kapillaren/Stopfen sind DNase-, RNase- and pyrogenfrei. 


G-LC-96 10 Racks á 96 Kapillaren und Stopfen, 1 Transferstift 359,00 

G-LC-Kit 

1 Starter-Kit, bestehend aus 7 Racks mit Kapillaren/Stophen, 1 

Transferstift und Rotor-Adapter 

497,00 

G-LC-A Rotor-Adapter für Light Cycler 280,00 

G-LC-T Transferstift 9,80 








Quali - Tubes, Reaktionsgefässe für die PCR: 0,2ml und 0,5ml Einzeltubes 

file:///F|/Kisker/Kisker/deutsch/tubes_d.htm (1 von 21) [08.12.2005 22:33:01]


Ultradünne Gefäße für die PCR gewähren einen schnellen 

Temperaturaustausch zwischen Heizsystem und Probe. Die 

dünnwandigen Tubes passen in alle gängigen Heizblöcke. Die 

Produkte sind in hochpolierten Formen hergestellt und absolut frei von 

Schmiermitteln, Farbstoffresten und Schwermetallen. Wie auch die 

anderen Produkte sind sie DNase-, RNase-und pyrogenfrei. Die lange 

Kappenform verschließt die Tubes sicher und verhindert Probenverlust 

durch Evaporation während der Heizphase. 

Die Tubes sind mit erhabenen oder flachen Verschlüssen, transparent 

oder farbig gemischt (blau - grün- orange - rot - violett - gelb) sowie in 

Einzelfarben erhältlich. 

1 VE=1000 Tubes 1-4 VE 5-9 VE 10+ VE 

Kat. # Volumen Cap Form/ Farbe Euro Euro Euro 

G001 0,2ml Erhaben / klar 39,40 36,85 34,30 

G001-A 0,2ml Erhaben/ farbig-mix 41,95 39,40 36,85 

1-4 VE 5-9 VE 10+ VE 

G001-B 0,2ml erhaben / blau 39,90 37,50 35,00 

G001-G 0,2ml erhaben / grün 39,90 37,50 35,00 

G001-O 0,2ml erhaben / orange 39,90 37,50 35,00 

G001-R 0,2ml erhaben / rot 39,90 37,50 35,00 

G001-V 0,2ml erhaben / violett 39,90 37,50 35,00 

G001-Y 0,2ml erhaben / gelb 39,90 37,50 35,00 

G001-F 0,2ml flach / klar 39,40 36,85 34,30 

G001-AF 0,2ml flach / farbig-mix 41,95 39,40 36,85 

10 VE 

G001-BF 0,2ml flach / blau 39,90 37,50 35,00 

G001-GF 0,2ml flach / grün 39,90 37,50 35,00 

G001-OF 0,2ml flach / orange 39,90 37,50 35,00 

G001-RF 0,2ml flach / rot 39,90 37,50 35,00 

G001-VF 0,2ml flach / violett 39,90 37,50 35,00 

G001-YF 0,2ml flach / gelb 39,90 37,50 35,00 

1-4 VE 5-9 VE 10+ VE 

G050 0,5ml flach / klar 28,90 25,90 23,90 

G050-A 0,5ml flach / farbig-mix 31,90 29,80 28,40 

Quali - Tubes, Reaktionsgefässe für die PCR: 0,2ml ohne Deckel 



Ultradünne Gefäße für die PCR 

Hergestellt in hochpolierten Formen hergestellt und absolut frei von Schmiermitteln, 

Farbstoffresten und Schwermetallen 

zerifiziert DNase-, RNase-und pyrogenfrei. 

Kat. # Volumen Farbe VE Euro 


G001-NC-B 0,2ml blau 10 x 1000 395,00 

G001-NC-G 0,2ml grün 10 x 1000 395,00 


G001-NC-R 0,2ml rot 10 x 1000 395,00 

G001-NC-V 0,2ml violett 10 x 1000 395,00 

G001-NC-Y 0,2ml gelb 10 x 1000 395,00 

Quali - PCR Tubes, 8er - Streifen PCR Tubes 

PCR Tubes in 8er - Streifen haben gleiche Spezifikationen wie unsere 0,2ml Einzeltubes und 

sind DNase-, RNase und pyrogenfrei. Die Tubes werden in Streifen zu 8 Tubes angeboten. 

1 VE =125 Streifen 1-4 VE 5-9 VE 10+ VE 

Kat. # Volumen Farbe Euro Euro Euro 

G002 0,2ml transparent 71,10 68,25 63,65 

G002-A 0,2ml farbig-sortiert 71,10 68,25 63,65 

10 VE 

G002-B 0,2ml blau -- -- 636,50 

G002-G 0,2ml grün -- -- 636,50 

G002-R 0,2ml rot -- -- 636,50 

G002-O 0,2ml orange -- -- 636,50 

G002-V 0,2ml violett -- -- 636,50 

G002-Y 0,2ml gelb -- -- 636,50 

Quali – PCR Tube Caps 

1 VE = 125 Streifen 1-4 VE 5-9 VE 10 + VE 

Kat. # Form Farbe Euro Euro Euro 

G004 erhaben transparent 16,35 14,85 13,80 

G004-F flach f. RT-PCR transparent 25,90 24,90 23,90 

G004-A erhaben farbig-sortiert 16,35 14,85 13,80 

G004-B erhaben blau -- -- 138,00 



G004-G erhaben grün -- -- 138,00 

G004-R erhaben rot -- -- 138,00 

G004-O erhaben orange -- -- 138,00 

G004-V erhaben violett -- -- 138,00 

G004-Y erhaben gelb -- -- 138,00 

Quali - PCR Tubes mit individuell anhängendem Deckel 

Diese transparentenTubes werden in Streifen zu 8 Tubes ( 0,2ml ) 

angeboten und haben den Vorteil, daß einzelne oder mehrere 

Tubes geschlossen werden können, während andere noch zur 

Probenvorbereitung geöffnet bleiben können. 

Diese Tubes sind ebenfalls DNase-, RNase- und pyrogenfrei. 

1-4 VE 5 + VE 

Kat. # Pack.einheit Farbe Euro Euro 

G003 1 x 120 Streifen klar, erhabener Deckel 92,90 89,00 

G003-A 1 x 120 Streifen farbig gemischt, erhabener Deckel 96,90 92,00 

G003 -F 1 x 120 Streifen klar, flacher Deckel 61,90 58,80 

0,2ml Low Profile dünnwandige Tube Streifen EU (Extreme Uniformität) für Éxtraordinary 

PCR & Real Time PCR´ 

Nur eine uniforme Wandstärke garantiert akkuraten Temperaturtransfer und damit eine 

gleichmäßige und präzise Cycling- Reaktion. Die Tubes können mit niedrigsten 

Ansatzvolumen von 5µl benutzt werden, da die maximale Abweichung der Wände nur 

0,05mm beträgt. Die reduzierte Höhe des Tubes verbessert das Evaporationsverhalten und 

die Lichtverhältnisse für Real Time PCR. 

Material 

Hochqualitatives Polypropylen garantiert Transparenz und Gasdichtichkeit, die Produkte sind DNase-, RNase-, 

pyrogenfrei und frei von humaner DNA 

Cap Strip 

Die flache und dünnwandige Cap-Form garantiert schnelle Aufheizung des eingeschlossenen Luftvolumens und limitiert 

die Kondensation auf ein Minimum. Eine extra weite optische Zone garantiert einen maximalen Lichttransfer.Bei 

Verwendung in PE Cyclern & Biorad iCycler emphehlen wir den Einsatz des ´Low Profile Strip Adapters´. 

Überzeugen Sie sich von der Qualität, nutzen Sie die Einführungspreise! 


GK79601 EU 8-tube strip, transparent 1 x 120 Streifen 49,95 

GK79609 EU 8-tube strip, weiss, für RT-PCR 1 x 120 Streifen 49,95 

GK79610 EU 8-tube strip, schwarz, für RT-PCR 5 x 120 Streifen 249,00 

GK79701 EU 8-cap strip, transparent 1 x 120 Streifen 19,00 

GK77777 Low Profile Tube adapter 1 Adapter 55,00 

0,2ml dünnwandige PCR Tubes EU (Extreme Uniformität) 



Nur eine uniforme Wandstärke garantiert akkuraten Temperaturtransfer und damit einen gleichmäßige 

und präzise Cycling - Reaktion. Die Tubes können mit niedrigsten Ansatzvolumen von 5µl benutzt 

werden, da die maximale Abweichung der Wände nur 0,05mm beträgt. 

Material 

Hochqualitatives Polypropylen garantiert Transparenz und Gasdichtigkeit, die Tubes sind DNase-, RNase-, pyrogenfrei 

und frei von humaner DNA. Die Tubes weisen eine erhöhte Flexibilität auf, die ein Platzen oder andere Beschädigungen 

unter erhöhten Belastungen vermeiden. 

Cap 

Die flache und dünnwandige Cap-Form garantiert schnelle Aufheizung des eingeschlossenen Luftvolumens und limitiert 

die Kondensation auf ein Minimum. Die Kombination aus erhabener Randform mit flacher Oberfläche garantiert zum 

einen absolut dichten, kondensationsfreien Verschluss, zum anderen ermöglicht die mattierte, flache Oberfläche das 

Beschriften. Das Cap hat einem Ánti-Kontaminations-Schutz´, der Kreuzkontaminationen durch manuelles Hantieren mit 

den Tubes verhindert. 



96–Well–PCR–Platten, flache Oberfläche, flexibel "high und low-profile" 

Diese Platten kann praktisch mit allen 0,2ml Blöcken verwendet werden. 

Die flache Oberfläche erleichtert den Verschluss mit Folien Ihrer wahl. 

Low-Profile-Platten werden insbesondere bei kleinen Probenvolumen 

empfohlen, da der Totraum zwischen Probe und Heizdeckel reduziert 

wird. 

Kat.# Beschreibung Euro/50 Platten Euro/100 Platten 



Quali - PCR - Platten ohne Rahmen 

Unsere PCR-Platten im Mikrotiterplattenformat sind Trägerplatten bestückt mit 

0,2ml extra dünnwandigen PCR-Tubes, die einen schnellen Temperaturaustausch 

zwischen Heizsystem und Probe gewährleisten. Die PCR-Platten sind garantiert 

DNase- und RNase frei und eine Alternative für Großverbraucher anstelle von 

Einzel-PCR-Tubes oder Tubes in Streifen. Die erhabenen Tubes können sowohl 

mit Dichtungsfilmen wie auch erhabenen (G004) oder flachen (G004-F) Caps in 8- 

Streifen verschlossen werden. Die PCR-Platten passen zu allen gängigen Thermo- 

Cyclern und sind im 96-Well Format auch steril erhältlich. 

10 Platten 50 Platten 100 Platten 

Kat.# Anzahl Plätze Farbe Euro Euro Euro 





G033 96 Well steril transparent 45,50 198,80 350,20 

G032-A 96 Well farbig mix -- 159,00 310,00 



G032-B 96 Well blau -- 149,00 295,00 

G032-G 96 Well grün -- 149,00 295,00 

G032-R 96-Well rot -- 149,00 295,00 

G032-O 96 Well orange -- 149,00 295,00 

G032-V 96 Well violett -- 149,00 295,00 

G032-Y 96 Well gelb -- 149,00 295,00 

Quali - PCR Platten mit Rahmen und Halbrahmen, 96 Well 

Zusätzlich zu den oben beschriebenen PCR Platten bieten wir 

weitere Alternativen für den Einsatz in speziellen Cyclern. Diese 

Platten haben die gleichen chemisch-biologischen Eigenschaften 

wie die oben beschriebenen. Die Platten mit Vollrahmen sind 

kompatibel mit Robotersystemen und die Schlitze im Rahmen 

gewährleisten eine exakte Handhabung durch den Roboter. Der 

vorhandene Platz auf dem Rahmen kann für Barcodes 

verwendet werden 

- G060H passt ideal zu den Perkin Elmer Cyclern 9600 and 

9700. 

- G060/H/1E optimiert für ABI 3100, flache Oberfläche, kein 

störender Rand beim Aufbringen von Verschlussfolien 

-G060/H/1E-OA mit erhöhtem, umlaufenden Rand für ABI 3100, 

3700, 3730, 7000, 7700, 7900, GeneAmp 5700, 9600, 9700. 

- G060/H-W und G060H-1E-W weiße Platten, besonders 

geeignet für "Lighttyper" Hoffmann-LaRoche 

- Plattenkompatibilität, Septamatten und flache Verschußstreifen 

und Folien für RT-PCR siehe unten 

- Alle Platten (außer G060/H1E-OA) auch farbig erhältlich, bitte 

Farbcode an Bestellnummer zufügen: B = blau, G = grün, R = rot, 

O = orange, V = violett, W=weiß, Y = gelb 

- Septamatten und RT-PCR Zubehör siehe unten. 

10 Platten 50 Platten 100 Platten. 

Kat.# Format Farbe Euro Euro Euro 

G060 96 Well mit Rahmen 

transparent 

Transparent 

28,80 139,00 269,00 

G060/H 96 Well Halbrahmen transparent 28,80 139,00 269,00 

G060/H/1E 

G060/H/OA 

G060/H/SG 

XXX-B-G-R-O- 

V-W-Y 

96 Well Halbrahmen/1 

Aussparung 

96 Well 

Halbrahmen/umlaufender Rand 

96 Well 

Halbrahmen/segmentiert 

transparent 28,80 139,00 269,00 

transparent 28,80 139,00 269,00 

transparent 28,80 139,00 269,00 

96 Well farbig 149,00 295,00 

Quali - PCR Platten, 96 Well für ParAllele/Affymetrix System 



Diese Platten sind mit speziellen Barecodes versehen zum Einsatz im MegAllele Genotyping 


Kat.# Beschreibung Farbe Euro 

50 Platten 

321-63-ANN Anneal PCR Platte transparent 229,00 

321-63-ASY Assay PCR Platte transparent 229,00 

321-63-HYB Hybridization PCR Platte transparent 229,00 

321-63-LBL Label PCR Platte transparent 229,00 

Septa/Tubes/Kapillaren für ABI Systeme und Verschlussfolien für PCR & RT-PCR 

Septamatten (Kat.Nr. G060/S-3100): aus hochreinem Silikon, sehr 

flexibel; zertifiziert DNase-, RNase-und pyrogenfrei, autoklavier- und 

wiederverwendbar für ABI 3100. 

Septa(Kat.Nr. G310-S) für 0,5ml Tubes und 0,5ml Tubes (G310-T) für 

ABI PRISM 310 

Ultra-Clear-Folie (Kat.Nr.G060/UC-RT): Die Klarheit gewährleistet die 

optische Analyse während der RT-PCR. Der einmalige drucksensitive 

Klebstoff hinterläßt keine Klebstoffreste an der PCR-Platte, die mit den 

Proben interferieren könnten. 

RT-PCR-Deckelstreifen (Kat.Nr.G004-F): verwendbar mit unseren 

PCR-Platten und 8er-Tube-Streifen. Die plane hochklare 

Deckeloberfläche ist speziell für RT-PCR geeignet. 

Polyester-Adhäsivfolie (Kat.Nr. G040): eine Adhäsivfolie für den 

Einsatz bei kurzzeitigen hohen Temperaturen, wie PCR, oder zur 

Abdeckung von ELISA-Platten 

Thermal-Seal-Folie (Kat.Nr. G042): eine hochwertige Qualität für den 

Thermoverschluß von PCR-Platten 

Alufolie (Kat.Nr. G071): diese kaschierte Alufolie ist der ideale 

Verschluß für weite Temperaturbereiche, resitent gegen den Kontakt 

mit agressiveren Reagenzien, geeignet für den Schutz 

lichtempfindlicher Proben 

G071-P neu im Programm: die DURCHSTECHBARE Alufolie 

Alle Verschlußfolien und Deckelstreifen sind DNase- RNase- und 

pyrogenfrei, Maße 78 x 120mm + 10mm Griffleiste. 

Kat. # Beschreibung Anwendungsbereich VE Euro 

G060/S-3100 Septamatte ABI 3100 10 Matten 75,75 

G310-S Septa f. 0,5ml Tubes ABI 310 500 139,00 

G310-T 0,5ml Tube ABI 310 500 42,90 



G060/UC-RT Ultra Clear RT-PCR-Folie RT-PCR 100 Filme 169,80 

G004 Caps, transparent PCR 125 Streifen zu 8 16,35 



G004-F Caps, flach f. RT-PCR RT-PCR 125 Streifen zu 8 25,90 

G040 Adhesive Folie, PP -40°C bis +100°C 100 38,00 

G041 Adhesive Film steril -40°C bis +100°C 100 55,75 

G042 Thermal Seal.Film -40°C bis +100°C 100 48,55 

G071 

G071-P 


Papier kaschiert 


durchstechbar 

-40 bis 135°C 100 24,50 

-40 bis 135°C 100 28,50 

G079 Andruckrolle 100 1 29,90 

MiniSealer 

Die thermische Verschlussmethode ist die effektiefste Methode, um PCR-Platten (96- und 384 Well) 

und Deep-Well-Platten absolut dicht zu verschließen. Kristallographie- und RT-PCR-Platten können 

mit Adhesiv-Folien ohne Hitzeanwendung verschlossen werden. Fingerabdrücke, die die 

erforderliche optische Klarheit beeinflussen können, werden vermieden 

Der MiniSealer ist ein halbautomatisches System, bei dem die Einstellung der Andrucktemeratur unddauer 

manuell über Tastatur, die Ausführung und Kontrolle mittels Microprozessor erfolgt. Die 

Bedienung ist einfach und der Plattenverschluss vollzieht sich in Sekunden. Der Heizblock wird 

automatisch auf Platte/Folie abgesenkt und und gibt anschließend die verschlossene Platte frei. 

Das Gerät beinhaltet je einen Supportblock für SBS-Format-Platten und Halb/Vollrahmenplatten. 

Spezifikationen: Abmessungen: 25x43x45 cm, Gewicht 29,5 kg 



Quali – 384er PCR-Platten, optimiert für ABI- und MJ-Research-Systeme 

alphanumerische Identifikationssystem 

hochreines Polypropylen 

garantiert DNase-, Rnase- und pyrogenfrei 

Form-optimiert für ABI 3100, 3730, 7000 sowie MJ Research Systeme PTC200 und PTC225. 




G034-ABI-A farbig gemischt -- 209,00 399,00 

G034-ABI-B blau -- 209,00 399,00 

G034-ABI-S schwarz -- 209,00 399,00 

G034-ABI-G grün -- 209,00 399,00 

G034-ABI-O orange -- 209,00 399,00 

G034-ABI-R rot -- 209,00 399,00 

G034-ABI-V violett -- 209,00 399,00 



G034-ABI-W weiß -- 209,00 399,00 

G034-ABI-Y gelb -- 209,00 399,00 

384 PCR Platten 

Für Anwender mit sehr hohen Probenaufkommen ist diese Platte geeignet. Die Wells haben 

ein maximales Volumen von 40µl mit einem Arbeitsvolumen von 25µl. Die Platte ist mit 

gängigen Thermo-Cyclern wie Perkin Elmer 9700, Techne, Hybaid einsetzbar und weist ein 

alphanumerisches Identifizierungsystem auf. Sie kann mit gängigen Dichtungsfilmen 

verschlossen werden. Hochreines Polypropylen und Transparenz sprechen für die Qualität. 

Zudem sind sie für den Einsatz in Robotersystemen mit Streifen-Codierung geeignet. Auch 

hier ist DNase- und RNase Freiheit garantiert. 



G034 transparent 39,90 189,00 329,00 

G035 Weiss -- 219,00 419,00 

G036 Schwarz -- 219,00 419,00 

Silikonmatten für PCR Platten 

Die Silikonmatten sind aus hochreinem Silikon und deswegen sehr flexibel. Sie 

zeichnen sich aus durch eine alphanumerische Kodierung, sind durchstechbar und 

selbstdichtend. Sie sind zertifiziert DNase-, RNase und pyrogenfrei, autoklavierbar 

und wiederverwendbar. 

G068 Andruckmatte: garantiert höhere Dichtigkeit, vermeidet Evaporation während 

der PCR, verwendbar auch in Verbindung mit Folien 

G078 Expansion-Matte: für Perkin Elmer, dichtet Tubes im "MicroAmp" Tray. 

Kat. # Anwendung,Matte für: VE Euro 



G074 PCR-Platte, 384 Deep Well 10 49,80 

G078 96 Well Expans.Matte für PE 10 42,00 

G068 Andruckmatte für PCR-Platte 10 42,00 

PCR Platten Kompatiblität 

Thermo Cycler 

G032 96 

Well 

G060 96 

Well mit 

Rahmen 


Halbrahmen 

ABI 3100 / 3130 ok 

ABI 3700 / 3730 ok 

G060/H/1E & 

G060/H/OA 96 



segmentiert, 

Halbrahmen 




file:///F|/Kisker/Kisker/deutsch/tubes_d.htm (9 von 21) [08.12.2005 22:33:01] 

G034- 

ABI 384 

Well


ABI Geneamp 

2720/5700 

ABI Geneamp 

9600 / 9700 

ok ok ok 







Bio-Rad 

GeneCycler 

ok ok 



Eppendorf 

Mastercycler 







MJ Research 

PTC200 









Stratagene 

Robocycler 

ok ok ok 



Beckmann CEQ 

alle Modelle 

Quali - Deep Well Platten 


ok ok


Die autoklavierbaren Deep Well Platten sind aus hochreinem Polypropylen. Das 96iger 

Format ist mit Mehrkanalpipetten und Robotersystemen kompatibel. Die Platten haben 

zylindrische Wände mit Rundboden, sodaß die Proben vollständig zurückpipettiert werden 

können, welches bei Platten mit quadratischem Boden nicht möglich ist. 

Die "Square-Well-Platten (G064) eignen sich dagegen besser zur Kultivierung von 

Bakterien. 

Die DNase-, RNase-, Pyrogen und Metall freien, stapelbaren Deep Well Platten sind ideal 

für DNA/RNA Assays sowie andere Enzymtests, chemische Resistenz und Gefrierfähigkeit 

bis –80°C sind weitere Vorteile. Als Verschlüsse bieten wir wiederverwendbare 

Silikonmatten sowie selbstklebende PP- und Alufolien an. 

Kat.# Beschreibung Material/Farbe/VE Euro 




G064 

Deep Well Platte, 2,0ml 

quadratische VerDeepung 

PP/ klar / 25 Platten 96,90 

Silikonmatten und Verschlußfolien für Deep-Well- und Zellkulturplatten 

Silikonmatten: hochreines Silikon, sehr flexibel, alphanummerische Kodierung, 

durchstechbar, selbstdichtend, autoklavier- und wiederverwendbar. 

Gasdurchlässige Folie: eine poröse Adhesivfolie für Zell- und Bakterienkulturen. Die 

Folie ist effizent dicht, schützt vor Kontaminationen und ist gasdurchlässig. Kat.# 

G067 nicht steril und G067-S steril , Maße 80x12mm LxB 

PP-Folie Kat.Nr. G070: selbstklebende Folie aus PP, temperaturbeständig von –40 

bis +80°C, Maße 78 x 120mm + 10mm Griffleiste 

Alufolie Kat.Nr. G071: selbstklebende, kaschierte Alufolie, temperaturbeständig von 

–40 bis +135°C, Maße 78 x 120mm + 10mm Griffleiste 

Alle Silikonmatten und Verschlussfolien sind DNase- RNase- und pyrogenfrei 


G070 PP-Folie 100 24,10 

G071 Alu-Folie 100 24,60 

G067 gasdurchlässige Zellkulturfolie 100 69,00 

G067-S gasdurchlässige Folie steril 2 x 25 49,00 

G075 für runde Deep Wells 1 oder 2ml G062/G063 10 39,00 

G076 für quadratische Deep Wells 1 oder 2ml G064 10 39,00 

G077 für runde Deep Wells 500µl 10 39,00 

384-Well ´Diamond´ Mikroplatten und DMSO resistente Imperma Matte 



Eine neue square Well Platte für "HTS und Drug Discovery Labs" , verfügbar in 120µl und 

240µl 

exzellente chemische Resistenz von -80°C bis +120°C verwendbar 

SBS Foot Print für Roboter Anwendungen 

240 µl Version für maximale Probenlagerung 

ultraflache Oberfläche zur Verwendung adhesiver oder heissklebender Folien 

alphanumerische Kennzeichnung 

bis 4.000g zentrifugierbar 

Imperma-Matte: autoklavierbar, wiederverwendbar, Chemikalienresistent 

Platten und Matten sind zertifiziert DNase-, RNase frei. 

Kat.# Beschreibung Max. Volumen mit Silikonmatte VE Euro 



G384-SQ 384 Imperma-Matte (Silikon) für square Wells 10 49,8 

Quali -Glasbodenplatte mit 96 - 384 und 1536 Well 

Eine hochqualitative Glasbodenplatte entsprechend SBS-Standards (127,8 x 85,6 x 

14,6mm). Reduzierung der Autofluoreszenz im Assay unter 5% des Levels von 

Standard-Plastikmikrotiterplatten. 


wesentliche genauere Messungen aufgrund bisher umübertroffener Plangenauigkeit< 

75µ bei 96 und 384 Well Platten, < 125µ bei den 1536 Well Platten 

"low-base design" garantiert Lesbarkeit aller Wells, speziell den äußeren Wells 

"square Well design" erhöht die optisch verfügbare Fläche und das Well-Volumen - 

ideal für HTP Anwendungen 

Hauptanwendungen: 

Fluorescence Correlation spectroscopy (FCS) 

Confocal Imaging 

Fluorescence Polarisation 

Cell-based Assays 

Microarrays 

Laser-induced Fluorescence 

Kat.# Beschichtung/Sterilität Wells/Volumen Euro/5 Platten Euro/20 Platten Euro/60 Plates 

GB-96 ohne / nein 96/500µl 61,00 231,80 660,00 

GB-96 -S ohne / ja 96/500µl 108,00 410,40 1.083,00 



GB-384 ohne / nein 384/120µl 108,00 410,40 1.111,50 

GB-384 -S ohne / ja 384/120µl 149,00 566,20 1.539,00 



GB-1536 ohne / nein 1536/8µl 244,40 928,00 2.508,00 

GB-1536 -S ohne / ja 1536/8µl 286,00 1.086,00 2.935,50 







Füllvolumen 55ml, V-förmiger Boden zur nahezu kompletten Entleerung aus klarem PVC 



Zubehör for ABI PRISM 377 

Untenstehend haben wir eine Liste von Zubehörteilen wie Glasplatten, Spacer und 

Kämme für den automatischen Sequenzierer ABI PRISM 377 zusammengestellt 

Produkte signiert mit * sind für den 96Well Upgrade 

High-Volume-Kämme haben größere Abstände zwischen den Zähnen und die Zähne 

laufen spitzer als beim Haifischzahn-Kamm zu. 

Extra lange Kämme haben 2mm längere Zähne als Standardkämme 

Sharkgum Kämme sind Haifischzahnkämme, die jedoch nicht spitz zulaufen, sonder mit 

einem breiteren Ende gestaltet sind. Dadurch entsteht ein größerer Abstand zwischen 

den Reihen 

ABI PISM ist eingetragenes Warenzeichen von Perkin Elmer Corporation 





377-24GP Borosilikat Glasplatte front 24cm 1 288,00 

377-24GSP Borosilikat "Step" Glasplatte front* 24cm 1 372,00 

377-24GPR Borosilikat Glasplatte rear 24cm 1 288,00 








































Casting Kamms 







Special Kamms 

377-48HVST 

377-64HVST 

377-72HVST 


0,2mm 


0,2mm 


0,2mm 


1 65,00 

1 71,00 

1 71,00


377-96HVST-02 

377-96HVST-03 

377-96HVST-04 

377-48ELST 

377-64ELST 

377-96ELST 


0,2mm 


0,3mm 


0,4mm 

48 Well Extra Long Haifischzahn-Kamm, mylar 

0,2mm 


0,2mm 


0,2mm 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 












Quali - Mikrotest-Platten, 96 Well für Proteinkristallisation 

Diese 96-Well- SBS-Standardformat-Platte wird für die Anwendung "Sitting Drop" HTP 

Proteinkristallisation angeboten. 

Die Platte hat 96 Pufferreservoire mit je einem Proteikristallisationsnäpfchen. Die Platten sind aus 

hochwertigem, optisch klarem Polystyrol. Das Pufferreservoir hat eine neuartige D-Form, welche 

geometrisch an der rechten Seite angeordnet ist, während das dazugehörige 

Proteinkristallisationsnäpfchen auf der linken Seite angeordnet ist. Die Platte kann manuell oder über 

Roboter befüllt werden. 

Als Verschlussfolie eignet sich besonders die Ultra-klare Folie Kat.# G060/UC-RT 

Charakteristika: SBS-Standard Platte mit 96 Wells, maximales Puffer Volumen 250 µl, 

Proteinkristallisationsnäpfchen 4,3 µl 

kompatibel mit manuellen Pipetten und automatisierten Systemen 

resistent gegen organische Lösungsmittel 

reduzierte Polarisation und Statik 

Barcode Option 

Das runde Proteinkristallisationsnäpfchen erlaubt einfachen Zugriff für weitere Manipulationen 


G096-PC Proteinkristallisationsplatte, 96 Well 84,00/10 395,00/50 

G060/UC-RT Ultra-Clear-Folie 169,80/100 

Proteinkristallisation - Software 



Zusätzlich bieten wir eine "Crystal Recognition Software" zur automatischen Kristall-Detektion für 

den HTP Propteinkristallisationsprozess an. Die Software wurde von Wissenschaflern des 

Lawrence Livermore National Laboratory (LLNL) entwickelt. Die Software kann in jedes beliebige 

Imaging-System integriert werden. 

Die CRS-Software bietet folgende Vorteile: verbessert Prezision und Geschwindigkeit der Detektion 

weist Unterschiede zwischen Prezipitation und Kristall aus 

einfach zu handhaben 

findet auch kleine und meist unsichtbare Kristalle, die visuell nicht detektierbar sind 

kostengünstig, da kein neues Imaging-System benötigt wird 

Eine Demoversion stellen wir auf Anfrage zur Verfügung. 


G096PC-CRS Crystal Recognition Software auf Anfrage 

Quali - Mikrotest-Platten, 96 Well Polypropylene 

Diese 96-Well-Platten sind aus hochwertigem Polypropylen "medical grade" hergestellt. Mit der ultraflachen 

Oberfläche sowie Kompatibilität für HTS sind sie hervoragend geeignet für Roboter liquid 

handling equipment (SBS-standard). 

Hauptanwendungsbereiche: Probenlagerung und -transport – Screening – HTP und Mikrotiter 

Assays. 

Vorteile: 

erhältlich mit Rundboden (500µl), bestens geeignet für sanfte Zellmanipulation, und V-Boden (450µl) 

für effiziente Probensammlung und -manipulation 

spezielles Well design minimiert Risiko der Kreuz-Kontamination und gewährleistet effektive Haftung 

von Klebefolien 

auffällige alphanumerische Kodierung für effiziente Well-Identifizierung 

sehr stabile Platte beständig gegenüber einer Vielzahl von Chemikalien, Lösungsmittleln und 

Alkoholen 

einsetzbar im Temperaturbereich von -80 bis 121°C 

zertifiziert DNase-, RNase und endotoxin frei. 

Kat.# Beschreibung Farbe VE Euro 

G096-U Mikrotest-Platte, U-Form, 96 Well transparent 50 49,00 

G096-UBB Mikrotest-Platte, U-Form, 96 Well blau 50 69,00 

G096-UBG Mikrotest-Platte, U-Form, 96 Well grün 50 69,00 

G096-UBR Mikrotest-Platte, U-Form, 96 Well rod 50 69,00 

G096-UBY Mikrotest-Platte, U-Form, 96 Well gelb 50 69,00 

G096-UBW Mikrotest-Platte, U-Form, 96 Well weiss 50 69,00 

G096-UBS Mikrotest-Platte, U-Form, 96 Well schwarz 50 69,00 

G096-V Mikrotest-Platte, V-Form, 96 Well transparent 50 49,00 

G096-VBB Mikrotest-Platte, V-Form, 96 Well blau 50 79,00 

G096-VBG Mikrotest-Platte, V-Form, 96 Well grün 50 79,00 

G096-VBR Mikrotest-Platte, V-Form, 96 Well rod 50 79,00 

G096-VBY Mikrotest-Platte, V-Form, 96 Well gelb 50 79,00 



G096-VBW Mikrotest-Platte, V-Form, 96 Well weiss 50 79,00 

G096-VBS Mikrotest-Platte, V-Form, 96 Well schwarz 50 79,00 

Quali - Mikrotest Platten Polystyrol 

Hergestellt aus erstklassigem, kristallklaren Polystyrol, beste Reproduzierbarkeit durch 

minimale Leerwertabsorption, geringe Eigenfluoreszenz, mattierte Oberflächen verhindern 

Ablesefehler, alphanumerische Kennzeichnung der Vertiefungen, erhöhte Kavitätenränder zur 

Vermeidung von Kreuzkontaminationen. Durch abgerundete Ecken ist der Deckel nur in einer 

Richtung aufsetzbar. Die Platten sind stapelbar und haben ein Beschriftungsfeld auf der 

Seitenfläche. 

Kat.# Beschreibung, Volumen in ml/Well Euro/100 St. Euro/1000 St. 

G080-UB MTP-Platte, U-Form, 0,35 38,90 359,00 

G080-V MTP-Platte, V-Form, 0,34 38,90 359,00 

G080-F MTP-Platte,Flachboden, 0,41 38,90 359,00 

G080-D MTP-Deckel 28,50 249,00 

G080-MP6 Makroplatte, 6 well, 15 49,90 460,00 

Quali - Mikro-Platten für Zellkulturen, 96 Well, steril mit aufgesetztem Deckel 

Nur optisch hochreine Kunststoffe finden in der Produktion für unsere Zell- und 

Gewebekulturplatten Verwendung und erlangen so für die mikroskopische Untersuchung eine 

unübertroffene optische Klarheit. Die Platten zeichnen sich aus durch: spezielle atoxische 

Oberflächenbehandlung optimale Zelladhäsion und hervorragendes Wachstum 

Kondensationsringe verhindern Medienverlust und somit Veränderung der Osmolarität 

keine toxischen Rückstände durch Strahlensterilisation 

sicherer Sterilistätsverschluss durch volltransparente Peel-Verpackung, 1 St. mit Deckel 

Preisnachlässe für Abrufaufträge/Jahresbedarfsbestellungen 

Kat. # Beschreibung/Volumen in ml/Well Fläche VE Euro 

G080TC-UB TC-Platte, U-Form, 0,35 0,35cm2 100 St. 149,90 

G080TC-V TC-Platte, V-Form, 0,34 0,28cm2 100 St. 149,90 

G080TC-F TC-Platte,Flachboden, 0,41 0,35cm2 100 St. 149,90 

G080TC-24F TC-Platte, 24 well, flach, 2,9 1,75cm2 100 St. 149,90 

G080TC-6F TC-Platte, 6 well, flach, 15 9,6cm2 100 St. 149,90 

Quali - Petrischalen für die Mikrobiologie und Zellkultur 

Unsere Petrischalen gewährleisten optische Transparenz, hohe Thermostabilität, plane Stapelflächen, 

beste Formstabilität sowie Herstellung unter keimarmen Produktionsbedingungen (maschinensteril) 

gemäß dem allg. Hygienestandard. 

Die Petrischalen sind maschinensteril, bzw strahlensteril für die Zellkultur mit oder ohne 

Belüftungsnocken in normaler und schwerer Ausführung lieferbar. 

Die Maße sind einheitlich 94 x 16mm ( Durchmesser x Höhe ) 

Kat. # Form / Sterilität Nocken Euro / VE Euro / VE 

G090 ungeteilt / m-steril nein 49,00 / 480 624,00 / 9600 

G091 ungeteilt / m-steril ja 49,00 / 480 624,00 / 9600 



G092 ½ geteilt / m-steril ja 52,00 /490 847,00 / 9600 

G093 1/3 geteilt / m-steril ja 56,00 /490 869,00 / 9600 

G094 ¼ geteilt / m-steril ja 59,00 /490 898,00 / 9600 

G093-TC ungeteilt, gammasteril nein 299,00 / 600 999,00 / 2400 

G094 -TC ungeteilt, gammasteril ja 299,00 / 600 999,00/ 2400 

"Label - Tape" Markierband 


Arbeits- und Hilfsmitteln im Labor. Vorteile: widersteht mehrfachem Autoklavieren ( +121°C ) 

kältebeständig bis –23°C beschriftbar mit allen gängigen Stiften rückstandsfrei abziehbar 


LT-54W weiss 19,1mm x 54m 10,50 

LT-54GR grün 19,1mm x 54m 10,50 

LT-54GE gelb 19,1mm x 54m 10,50 

LT-54BL blau 19,1mm x 54m 10,50 

LT-54RO rot 19,1mm x 54m 10,50 




Parafilm "M" 


Verschliessen von Gefäßen und Röhrchen. Sie ist praktisch geruchlos, resistent gegen Alkohol, 

Säuren und Basen in schwachen Konzentrationen 

Parafilm wird in der praktischen Dispenserbox geliefert. 

Kat.# Bezeichnung Abmessung Euro 



Beschichtete Mikroplatten, 96 Well, 384 Well, 1536 Well für HTS und Zellkultur 

Eine neue Produktlinie unterstützt die HTS Labore bei dem Trend zur Miniaturisierung. 1536 Well Platten haben einen 

Arbeitsbereich von nur noch 1 – 10µl Volumen. Für Labore, die den Schritt der Neuanschaffung geeigneter Geräte für 

diese Platten scheuen, bieten wir eine 384 Niedrigvolumen (5 – 20µl) Platte an. Diese Platte ist kompatibel mit gängigen 

Laborrobotern und Plattenlesegeräten und reduziert Material und Kosten bis zu 80% gegenüber herkömmlichen Platten. 

Die neuen beschichteten 96 und 384 Well Glasbodenplatten bieten herausragende optische Performance für 

hochauflösende HTS Tests. 



Alle Plattenformate können mit einer weiten Palette an Liganden beschichtet werden, inklusive Streptavidin, Avidin, 

Protein A, Protein G, Protein L, Poly-Lysine, Gelatine und Fibronektin sowie Liganden Ihrer Wahl. Darüber hinaus stehen 

für die HTS Tests, die einen Filtrationsschritt als integrierten Teil eines Testes benötigen, beschichtete Filterplatten in den 

Materialien stehen Nitrocellulose, Fiberglas, PVDF, Polycarboat, Polyester und Nylon zur Verfügung. 

Spezielle hoch qualitative Blockierungs-Reagenzien runden den Service ab. Die Platten können, um unspezifische 

Bindung zu verringern, nach der Beschichtung noch mit BSA, BMT-2 oder BMT-4 behandelt werden. Diese Blocker 

setzten an reaktiven Stellen von Glas, Metall, Plastik an und schaffen eine hydrophile Beschichtung. Als Ergebnis wird die 

nicht spezifische Adsorption von gelabelten Proteinen oder Nukleotiden weitgehend reduziert und das "Signal to Noise" 

Verhältnis der Tests maximiert. Die eingesetzten Blocker sind zertifiziert steril, DNase-, RNase und Protease frei. Um 

dem Anwender am Anfang die Optimierung der Nachblockierung zu erleichtern, bieten wir ein "Variety-Pack" bestehend 

aus je 1 Platte BSA, BMT-2, BMT-4, ungeblockt zum Preis der 5-er Packung vorblockiert. (Kat. # VARxxxx, bitte statt xxxx 

Kat.# der gewünschten Platte/Beschichtung einsetzen) 

Alle Platten haben aufgrund herausragender Qualität, steriler Produktionsbedingungen 

und der ensprechenden Vakuumverpackung eine Lebensdauer von bis zu zwei 

Jahren. Alle verwendeten Platten sind von höchster Qualität und sind auch in vielen 

Varianten, z.B mit optisch geschliffenen Glasböden, lieferbar. Falls Sie Ihre Ideal- 

Platte hier nicht finden - auf Anfrage beschichten wir Ihre Liganden auf Ihren 

Wunschplatten! 

Streptavidin 



96-well Platten (330ul Volumen) 

Biotin Protein 

A 

GaR IgG RaG IgG GaM IgG EURO 

10x2 Pl. 

EURO Pre- 

blocked 

10x2 Pl. 




Weiss -transp 

Boden 

Schwarz - 

transp. Boden 

Natur- 

Glasboden 

Weiss - 

Glasboden 

Schwarz- 

Glasboden 

384-Platten 

(Standard 

130ul Vol. 










Weiss - 

transp. Boden 

Schwarz - 

transp, Boden 





Weiss - 

Glasboden 

Weiss 



1536-Platten BS19 BA19 BB19 BPA19 BGR19 BRG19 BGM19 2297,00 2630,00 

(Volume = 

10ul) 




Zellkultur Poly-D-lysine/L-Lysine/Collagen Oberflächenmodifizierte Platten 

Poly-D- 

Lysine 

Poly- 

L- 

Lys 



1 

Weiss 

Schwarz 

Weiss - 

transparent 

Schwarz- 

tranparent 

Natur- 

Glasboden 

Weiss - 

Glasboden 

Schwarz- 

Glasboden 

384-Platten 

(Standard 

130ul Vol) 

BZPD- 

2 

BZPD- 

3 

BZPD- 

4 

BZPD- 

5 

BZPD- 

6 

BZPD- 

7 

BZPD- 

8 

BZPD- 

9 


10 

Weiss 

Schwarz 

Weiss - 

transparent 

Schwarz - 

transparent 

BZPD- 

11 

BZPD- 

12 

BZPD- 

13 

BZPD- 

14 

BZPL- 

1 

BZPL- 

2 

BZPL- 

3 

BZPL- 

4 

BZPL- 

5 

BZPL- 

6 

BZPL- 

7 

BZPL- 

8 

BZPL- 

9 

BZPL- 

10 

BZPL- 

12 

BZPL- 

13 

BZPL- 

14 

BZPL- 

15 

Typ I 

Collagen 

Hydrophilic 

nicht 

bindend 

Amino- 

Gruppen 

Carboxy- 

Gruppen 

Aldehyd, 

bindet 

Amino 

Gruppen 

Maleimide( 

bindet SH- 

Gruppen ) 

EURO/ 

15 x 2 

Platten 

EURO/ 

15 x 2 

Platten 


BZC-2 BH-2 BaM-2 BCa-2 BAl-2 BMa-2 426,00 426,00 







BZC- 9 BH- 9 BAM- 9 BCa- 9 BAl- 9 BMa- 9 568,00 568,00 








Weiss - 

Glasboden 

BZPD- 

15 

BZPL- 

16 

Schwarz-GlasBoden 

384-Platten BZPD- 

16 

(Low- 

Volume = 

25ul) 

Weiss 

Schwarz 

1536- 

Platten 

(Volume = 

10ul) 

Natur 

Weiss 

(Volume = 

10ul) 

Natur 

Weiss 

BZPD- 

17 

BZPD- 

18 

BZPD- 

19 

BZPD- 

20 

BZPD- 

21 

BZPD- 

22 

BZPD- 

20 

BZPD- 

21 

BZPD- 

22 

BZPL- 

16 

BZPL- 

17 

BZPL- 

18 

BZPL- 

19 

BZPL- 

20 

BZPL- 

21 

BZPL- 

22 

BZPL- 

20 

BZPL- 

21 

BZPL- 

22 















Kisker Produkte für die Biotechnologie 

G.Kisker GbR 


file:///F|/Kisker/Kisker/deutsch/popup/g-lc.htm [08.12.2005 22:33:03] 


Fenster schließen



P.O. Box 1329 


Germany 


Quali - qPCR Capillaries 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


The qPCR capillaries are convient to handle and 

packed as 2 stackracks, one with the capillaries and 

one with the caps. Each pack contains a transfer pin, 

which guarantees easy handling and safe closing of 

the capillaries. To use the capillaries, an reusable 

rotor-adapter is necessary, which is included in the 

starter-kit. 

The transparent plastic capillaries have several 

advantages compared to usualy used glass capillaries: 

- more cost effective analysis by reduced costs per analysis 

- non breakable, reduces the risk of DNA cross-contaminations by 

broken glass capillaries 

- no change of method by using glass capillaries instead of, no 

reduction of sensitivity 

- higher reaction volume, the capillaries can be filled if necessary up to 

50 µl reaction mix, e. g. by adding higher quantity of sample DNA can 

increase the sensitivity 

- sample recovery, the special design of aour capillaries allows you to 

recover the samples after the q-PCR by using a 10 µl pipet tip 

- capillaries and caps are DNase-, RNase- and pyrogenfree. 

Kat. # unit Euro 

G-LC-96 10 racks á 96 capillaries and caps, 1 transfer-pin 359,00 

G-LC-Kit 

1 starter kit, including 7 racks with capillaries/caps, 1 

transfer-pen and rotor-adapter 

497,00 

G-LC-A Rotor-Adapter for Light Cycler 280,00 

G-LC-T transfer-pen 9,80 









file:///F|/Kisker/Kisker/tubes_d.htm (1 von 26) [08.12.2005 22:33:07]



Quali - PCR Tubes, Single PCR Tubes 0,2 and 0,5ml 

Our PCR tubes and strip tubes are specifically designed 

for use in PCR machines and thermal cyclers. The tube 

walls are ultra thin and consistent, to ensure a fast 

temperature exchange beetween heatingsystem and 

sample, resulting in faster cycles. The ultrathin PCR 

tubes are made from high pure polypropylen in high 

polished moulds and are free of lubricants, dyes, heavy 

metals or fillers. Like our other PCR products they are 

certified DNase-, RNase-und pyrogen free. The unique 

tube design and the longer cap form and seals 

compared to other tubes ensures a tight fit and avoids 

sample evaporation. 

The PCR tubes are available with a domed cap or flat 

cap in clear or colored. 

1 Unit=1000 tubes 1-4 units 5-9units 10+Un. 

Cat. # Volume Cap form/ Color Euro Euro Euro 

G001 0,2ml domed / clear 39,40 36,85 34,30 

G001-A 0,2ml domed / color mix 41,95 39,40 36,85 

G001-B 0,2ml domed / blue 39,90 37,50 35,00 

G001-G 0,2ml domed / green 39,90 37,50 35,00 

G001-O 0,2ml domed / orange 39,90 37,50 35,00 

G001-R 0,2ml domed / red 39,90 37,50 35,00 

G001-V 0,2ml domed / violet 39,90 37,50 35,00 

G001-Y 0,2ml domed / yellow 39,90 37,50 35,00 


G001-F 0,2ml flat / clear 39,40 36,85 34,30 

G001-AF 0,2ml flat / color mix 41,95 39,40 36,85 

G001-BF 0,2ml flat / blue 39,90 37,50 35,00 

G001-GF 0,2ml flat / green 39,90 37,50 35,00 

G001-OF 0,2ml flat / orange 39,90 37,50 35,00 

G001-RF 0,2ml flat / red 39,90 37,50 35,00 

G001-VF 0,2ml flat / violet 39,90 37,50 35,00 

G001 YF 0,2ml flat / yellow 39,90 37,50 35,00 




G050 0,5ml flat / clear 28,90 25,90 23,90 

G050-A 0,5ml Flat / colored mix 31,90 29,80 28,40 



manufactured in high polished moulds and absolutely free of lubricants, dyes, 

heavy metals or fillersforms 


Cat. # Volume Color Unit Euro 


G001-NC-B 0,2ml blue 10 x 1000 395,00 

G001-NC-G 0,2ml green 10 x 1000 395,00 


G001-NC-R 0,2ml ret 10 x 1000 395,00 

G001-NC-V 0,2ml violet 10 x 1000 395,00 

G001-NC-Y 0,2ml yellow 10 x 1000 395,00 


8-strip PCR tubes have same characteristics as the single 0,2ml tubes 

and are DNase-, RNase and pyrogen free. The tubes are supplied in 

strips of 8 tubes. 

1 unit=125 strips 1-4 units 5-9 units 10+ units 

Cat. # Volume Color Euro Euro Euro 

G002 0,2ml clear 71,10 68,25 63,65 

G002-A 0,2ml colored mix 71,10 68,25 63,65 

10 units: 

G002-B 0,2ml blue -- -- 636,50 

G002-G 0,2ml green -- -- 636,50 

G002-R 0,2ml red -- -- 636,50 

G002-O 0,2ml orange -- -- 636,50 

G002-V 0,2ml violet -- -- 636,50 

G002-Y 0,2ml yellow -- -- 636,50 




1 unit = 125 strips 1-4 units 5-9 units 10 +units 

Cat. # Form Color Euro Euro Euro 

G004 domed clear 16,35 14,85 13,80 

G004-F flat f. RT-PCR clear 25,90 24,90 23,90 

G004-A domed colored mix 16,35 14,85 13,80 

G004-B domed blue -- -- 138,00 

G004-G domed green -- -- 138,00 

G004-R domed red -- -- 138,00 

G004-O domed orange -- -- 138,00 

G004-V domed violet -- -- 138,00 

G004-Y domed yellow -- -- 138,00 


The Tubes are supplied in strips of 8 tubes ( 0,2ml ) and 

have the advantage, that an individual or several tubes can 

be closed, while others are still open. These tubes are also 


1-4 units 5+units 

Cat. # Pack size Color Euro Euro 

G003 1 x 120 strips clear, domed cap 92,90 89,00 

G003-A 1 x 120 strips colored mix, domed cap 96,90 92,00 

G003 -F 1 x 120 strips clear, flat cap 61,90 58,80 

0,2ml Low Profile Thin Wall Tube Strip EU (Extreme Uniform) for Éxtraordinary 

PCR & Real Time PCR´ 

Only an uniforme wall thickness ensures accurate temperature transfer and 

therefor an even and precision cycling - reaction. The tubes can be used with a 

volume as low as 5µl. The maximum wall thickness diference is only +/- 

0,05mm. The low profile of the tube strips improves not only the evaporation 

characteristics but also the light-gain, necessary for ´Real Time PCR´. 



Material 

Highest qualitaties of virgin polypropyle ensures a optimum balance between transparency, impact 

resistance and gas-tightness. These products are DNase-, RNase-, pyrogen free and free of human DNA. 

Cap Strip 

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a 

minimum. Furthermore, it is extremly clear, allowing external monitoring of the tube´s content without 

opening. The extra wide optical areas ensure the highest maximum light transference which improves the 

minimum detection limit. When using PE Cyclers & Biorad iCycler we recommend the use of our ´Low 

Profile Strip Adapters´. 



GK79601 EU 8-tube strip, transparent 1 x 120 Stips 49,95 

GK79609 EU 8-tube strip, weiss, für RT-PCR 5 x 120 Strips 249,00 

GK79610 EU 8-tube strip, schwarz, für RT-PCR 5 x 120 Strips 249,00 

GK79701 EU 8-cap strip, transparent 1 x 120 Strips 19,00 

GK77777 Low Profile Strip Adapter 1 adapter 55,00 

0,2ml Thin Wall Tube EU (Extreme Uniformität) 

Only an uniforme wall thickness ensures accurate temperature transfer and 

therefor an even and precision cycling - reaction. The tubes can be used with a 

volume as low as 5µl. The maximum wall thickness diference is only +/- 

0,05mm. 

Material 

Hochqualitatives Polypropylen garantiert Transparenz und Gasdichtigkeit, die Tubes sind DNase-, RNase-, 

Pyrogen frei und frei von humaner DNA. Die Tubes weisen eine erhöhte Flexibilität auf, die ein Platzen oder 

andere Beschädigungen unter erhöhten Belastungen vermeiden. 

Cap 

Our flat and thin wall cap ensures fast heating of the entrapped air and limits any condensation to a 

minimum. The dome like shape of the cap improves, in combination with sealing bands, the closure and 

condensation characteristics, while the flat frosted part of the cap may be written on for identification 

purposes. 

Finally, the cap is equipped with a so - called Ánti-Contamination-Tab´, that eliminates the effect of sampleto-sample 

carry-over generated by manual opening. 




GK7940F EU -tube 0,2ml, colored 5 x 1000 Tubes / Farbe 199,00 

GK7940F: please advise color: ret, blue, green, yellow, orange or violet, minimum 5000 tubes /color 




This plate fits any regular or RT-Cycler. The flat form can 

be closed by any sealing films of your choice. 

Low-Profile-Plates are recommended in case of small 

sample volumes, as the dead-room will be reduced 

between sample and heated lid. 

Kat.# Beschreibung Euro/50 Plates Euro/100 Plates 




Our PCR-Plates in microtitre plate format comprises 96 x 0,2ml extra 

thinwall PCR Tubes, which guarantee a fast temperature exchange 

beetween heating system and sample. 

The PCR Plates are certified DNase- und RNase free and an alternative 

for laboratories with high quantity of samples. The high profile plates can 

be sealed with sealing films as well as with our domed(G004) or flat cap 

strips(G004-F).The PCR-Plates have an alpha-numeric coding system for 

easy identification and do fit to all comon thermal cyclers. The 96-plates 

can be cutted into smaller section as required. 



G030 24 well clear 18,40 71,10 137,55 

G037 32 well clear 18,40 84,35 140,95 

G031 48 well clear 19,95 96,65 148,90 

G032 96 well clear 28,10 139,00 269,00 

G033 96 well sterile clear 45,50 198,80 350,20 

G032-A 96 well colored mix -- 159,00 310,00 

G032-B 96 well blue -- 149,00 295,00 

G032-G 96 well green -- 149,00 295,00 

G032-R 96-well red -- 149,00 295,00 

G032-O 96 well orange -- 149,00 295,00 

G032-V 96 well violet -- 149,00 295,00 

G032-Y 96 well yellow -- 149,00 295,00 




In addition to above PCR plates we offer further 

alternatives to use with other special cyclers. 

These plates have same features as the above 

described. The full skirt plates are compatible with 

robotic systems and the holes in the skirt allow an 

exact handling by robotic arms. The extra space 

provided by the skirt can be used for bar code 

labeling 

The "half skirt" plate, G060H will fit ideal to the 

Perkin Elmer cyclers 9600 and 9700, G060/H/1E 

will fit for all ABI Systems 3700, 3730, 7000, 7700, 

7900, GeneAmp 5700, 9600, 9700 and ideal for 

ABI 3100 sequencer. The flat surface simple 

mounting of sealing films 

. The plate G060H/OA has an elevated skirt on top. 

G060/H-W und G060H-1E-W white plates are 

especial useful for "Lighttyper" Hoffmann-LaRoche. 

All plates (exept G060/H1E-OA) are available in 

different colors, please add the colore-code to the 

cat.nr. when ordering: B = blue, G = green, R = 

red, O = orange, V = violet, W=white, Y = yellow. 

for sealing options like septa mat and RT-PCR 

films see sealing options for PCR-Plates. 



G060 96 well full skirt transparent 33,25 139,00 269,00 

G060/H 96 well half skirt transparent 33,25 139,00 269,00 

G060/H/1E 

G060/H/OA 

G060/H/SG 

XXX-B-G-R-O-V- 

W-Y 

96 well half 

skirted for ABI 

3100 

96 well half 

skirted for ABI 

3100 

96 well half 

skirted, 

segmented 

transparent 33,25 139,00 269,00 

transparent 33,25 139,00 269,00 

transparent 33,25 139,00 269,00 

96 well colored 149,00 295,00 

Quali - PCR Plates, 96 Well for ParAllele/Affymetrix System 

These plates are especialy bararecoded for use in MegAllele Genotyping 


file:///F|/Kisker/Kisker/tubes_d.htm (7 von 26) [08.12.2005 22:33:08] 

50 Plates


Cat.# description Color Euro 

321-63-ANN Anneal PCR Plate transparent 229,00 

321-63-ASY Assay PCR Plate transparent 229,00 

321-63-HYB Hybridization PCR Plate transparent 229,00 

321-63-LBL Label PCR Plate transparent 229,00 

Septa/Tube/Capillaries for ABI PRISM Systems and sealing options for PCR & RT- 

PCR 

Septa mat (cat.nr. G060/S-3100): made from ultra pure 

silicon, very flexibel; certifizied DNase-, RNase-and 

pyrogen free, autoclavable- and reusable for ABI 3100. 

Septa (cat.nr. G310-S) for 0,5ml tubes for ABI Prism 310 

0,5ml tubes (G310-T) for ABI PRISM 310 

Ultra-Clear-Film (cat.nr.G060/UC-RT): the clearness 

garants the optical analysis during the RT-PCR. The 

unique pressure sensitive glue does not remain any 

residues on the PCR-plate, which can interfer with the 

samples. 

RT-PCR-Cap-Strips (cat.nr.G004-F): usable with our 

PCR-plates and 8-Tube-Strips (G002). The flat and high 

clear cap-surface is useful especialy for RT-PCR 

Polyester-Adhesive-Filmfolie (cat.nr. G040): a sealing 

film for use at short time high temperatures, as PCR, or 

to seal ELISA-Plates 

Thermal-Sealing-Film (cat.nr. G042): a high quality for 

thermal seal of PCR-Plates 

Aluminiumfilm (cat.nr. G071): this paper backed Alu-film 

is the best sealing for wide temperature range, resistent 

against contact with agressiv reagents, useful for the 

protection of lightsensitive samples 

NEW: cat.nr. G071-P the piercable Aluminium film 

all sealingfilms and cap-strips are DNase- RNase- and 

pyrogen free, dimensions 78 x 120mm + 10mm gripp 

Cat. # Description Application Pack size Euro 

G060/S-3100 Septa Mat ABI 3100 10 mats 75,75 

G310-S 

Septa f. 0,5ml 

Tube 

ABI 310 500 139,00 

G310-T 0,5ml Tube ABI 310 500 42,90 





G060/UC-RT 

G004 

G004-F 

Ultra Clear RT- 

PCR-Film 

Caps, domed f. 

RT-PCR 

Caps, flat f. RT- 

PCR 

RT-PCR 100 films 169,80 

PCR 125 strips of 8 16,35 

RT-PCR 125 strips of 8 25,90 

G040 Adhesive Film -40°C bis +100°C 100 38,00 

G041 

G042 

G071 

G071-P 

Adhesive Film 

sterile 

Thermal Sealing 

Film 

Adhesive 

Aluminium Film, 

paper backed 

Adhesive 

Aluminium Film, 

piercable 

-40°C bis +100°C 100 55,75 

-40°C bis +100°C 100 48,55 

-40 bis 135°C 100 24,50 

-40 bis 135°C 100 28,50 

G079 Pressure rol 100 1 29,90 

MiniSealer 

Heat sealing is the most effective method for sealing PCR-Plates (96- and 384 Well) 

and deep-well/-storage-plates. Cristallography- and RT-PCR-plates can also sealed 

with adhesive-films without heat, eliminating fingerprints which could disturb optical 

clarity or view field. 

The MiniSealer table-top sealer is a semi-automated system. It can be used with most 

brands and sizes of plates. 

Operation is simple:the plate is located with the film on top on the stainless steel 

carrier, set time and temperature and press the start button. The heating block is 

automatically lowered into contact with film and plate. Temperature and on hold time 

are microprocessor controled. When the cycle is complete after 1-4 seconds, the block 

is raised, allowing access to the seale plate. 

The system is delivered with an universal support block for SBS footprint plates and a 

support block for 96-well half and full-skirt plates. 

Specificationes: dimensiones: 25x43x45 cm, weight 29,5 kg 

Cat. # Description VE Euro 





alphanumerical identification system 

ultra pure polypropylen 

certified DNase-, Rnase- and pyrogen free 

form-optimized for ABI 3100, 3730, 7000, MJ Research Systeme PTC200 and PTC225. 




G034-ABI-A colored mixed -- 209,00 399,00 

G034-ABI-B blue -- 209,00 399,00 

G034-ABI-S black -- 209,00 399,00 

G034-ABI-G green -- 209,00 399,00 

G034-ABI-O orange -- 209,00 399,00 

G034-ABI-R red -- 209,00 399,00 

G034-ABI-V violet -- 209,00 399,00 

G034-ABI-W white -- 209,00 399,00 

G034-ABI-Y yellow -- 209,00 399,00 

384 PCR Plate 

The 384 PCR plate is manufactured for "High Throughput Screening" 

laboratories. The maximum well capacity is 40µl with a working volume of 25µl 

to accomodate additional DNA replication. The 384 PCR plate is complete 

compatible with 384 thermal cyclers, like Perkin Elmer 9700, Techne, Hybaid. 

The surface of the plate is embossed with an alpha-numeric grid for easy well 

location. The conical flat bottom well ensures even aspiration and the clarity of 

this ultra pure polypropylen is unsurpassed. They also can be easily labeled for 

bar coding in robotersystems. The plates are certified DNase-, RNase- and 

pyrogen free. 



G034 clear 39,90 189,00 329,00 

G035 white -- 219,00 419,00 

G036 black -- 219,00 419,00 

Silicone mats for PCR- and Deep Well Plates 




flexible. The mats show an alphanumeric grid system corresponding 

to the microplates for easy identification. The piercable selfsealing 

feature ensures, that evaporation and aerosoles are hindered from 

escaping. 

The mats can be cleaned, autoclaved reused and frozen and are 

certified DNase-, RNase and pyrogen free. 

G068 Compression Mat: garantes vapor lock, avoides evaporation 

during PCR, also usable in conjunction with sealing films 

G078 Expansion-Mat: for Perkin Elmer, seals all tubes in "MicroAmp" 

Tray. 

Cat. # Use with Unit Euro 



G074 PCR-plate, 384 deep well 10 49,80 

G078 Expension Mat f. PE Cycler 10 42,00 

G068 Compression mat for PCR-plate 10 42,00 


Thermo Cycler 

G032 

96 

Well 

G060 96 

Well mit 

Rahmen 

G060H 96 Well 

mit Halbrahmen 

ABI 3100 / 3130 ok 

ABI 3700 / 3730 ok 

G060/H/1E & 

G060/H/OA 96 

Well, 

Halbahmen 

G060/H/SG 96 

Well 

segmentiert, 

Halbrahmen 




ABI Geneamp 

2720/5700 

ABI Geneamp 

9600 / 9700 

ok ok ok 








G034- 

ABI 384 

Well


Bio-Rad 

GeneCycler 

ok ok 



Eppendorf 

Mastercycler 







MJ Research 

PTC200 









Stratagene 

Robocycler 

ok ok ok 



Beckmann CEQ 

alle Modelle 



ok ok


These plates are produced from high pure polypropylene, which is 

autoclavable. The 96 wells are compatible with multi-channel pipettors and 

can be used with roborters. As the plates have cylindrcyl walls with round 

bottom wells, the samples can be repipetted completely, which is not possible 

with square form wells. 

The deep well plates are stackable and cerfified DNase, RNase- pyrogen and 

metal free, which is ideal for DNA/RNA assays and other enzyme tests.The 

plates are chemical resistant and widestand deep temperatures up to - 80°C 

To close plates, we offer different alternatives as our self adhesive PP and 

Alu films and autoclavable and piercable high pure silicon mats. The silicon 

mats are also freezable and feature an alphanumeric grid system. 

Cat.# description material/ color/ pack size Euro 




G064 2,0ml 96 Square well plate PP/ clear/ 25 96,90 


Silicon mat: ultra pure silicon, very flexibel, alphanummeric coding 

system, piercable, selfsealing, autoclavable- and reusable. 

Breathable Sealing film: porous adhesiv filmspecialy designed for use 

in cell and tissue culture applications. The film seals all types of 

microplates andd effectively allows gas exchange for cellular or 

bacterial cultivation, while at same time preventing crosscontamination. 

Cat.# G067 non steril and G067-S steril , dimensions 

80x12mm LxW 

PP-Film Cat.Nr. G070: selfsealing film made from PP, suitable tfor 

sealing tissue culture plates, for short term storage and incubation, 

temperatureresistant from –40 to +80°C, Dimensions 78 x 120mm + 

10mm Gripp 

Alufilm Kat.Nr. G071: selfsealing, paper backed Aluminium film, 

temperature resistant from –40 to +135°C, dimensions 78 x 120mm + 

10mm Gripp 



G070 PP-Film 100 24,10 

G071 Alu-Film 100 24,60 

G067 Breathable Film 100 69,00 

G067-S Breathable Film 2 x 25 49,00 

G075 

for round Deep Wells 1 or 2ml 

G062/G063 


10 39,00


G076 

for quadratic Deep Wells 1 or 2ml 

G064 

10 39,00 

G077 for round Deep Wells 500µl 10 39,00 


A new square well Plate for "HTS and Drug Discovery Labs" , available in 120µl 

and 240µl 









chemical resistant for storage sample which require use uf strong solvents as 

DMSO 



Cat.# Description 

Max. Volume with 

Siliconmat 

Pack size Euro 



G384-SQ 384 Imperma-Mat (Silicon) for square wells 10 49,8 

Quali -Glass-Bottom-Plates in 96 - 384 and 1536 Well 

A high quality glass-bottom-plate manufactured according to current SBS- 

Standards (127,8 x 85,6 x 14,6mm), which reduces the appearance of 

autofluorescence in your assay readout to less than 5% of the level of 

unprocessed plastic microtiterplates. 


more accurate measurement due to unmatched flatness< 75µ for 96 and 

384 well plate, < 125µ for the 1536 well plate 

low-base design ensures readability of all wells, especially outer wells 

square well design increases the optical accesible area and well volume - 

ideal for HTP operations 

Main applications: 

fluorescence correlation spectroscopy (FCS) 

Confocal imaging 

Fluorescence polarisation 

Cell-based assays 

Microarrays 

Laser-induced fluorescence 



Cat.# Coating/Sterility Wells/Volume Euro/5 

Plates 

Euro/20 

Plates 

Euro/60 

Plates 

GB-96 plain / no 96/500µl 61,00 231,80 660,00 




GB-384 plain / no 384/120µl 108,00 410,40 1.111,50 




GB-1536 plain / no 1536/8µl 244,40 928,00 2.508,00 

GB-1536 -S plain / yes 1536/8µl 286,00 1.086,00 2.935,50 





fillingvolume 55ml, angeled sides and V-shaped bottom for nearly complete 

sample withdrawal offered in clear PVC non-sterile 

Cat.nr. description Pack size Euro 



Below is a list of parts as glas-plates, spacers, combs for the automatic 

sequencer ABI PRISM 377 


High Volume Combs have more space between the combs and tooth are 

sharper tapering as standard Sharktooth combs 


Sharkgum combs are not sharp tapering, it causes a bigger distance 

between the lanes 



377-12GP 

Borosilicate Glass Plate front 

12x18cm 


1 211,00


377-12GSP 

377-12GPR 

Borosilicate "Step" Glass Plate front* 

12x18cm 

Borosilicate Glass Plate rear 

12x18cm 

1 417,00 

1 211,00 

377-24GP Borosilicate Glass Plate front 24cm 1 288,00 

377-24GSP 


24cm 

1 372,00 

377-24GPR Borosilicate Glass Plate rear 24cm 1 288,00 

377-36GP 

377-36GSP 

377-36GPR 

377-48GP 

377-48GSP 

377-48GPR 


36x42cm 


36x42cm 


36x42cm 


48x54cm 


48x54cm 


48x54cm 

1 316,00 

1 416,00 

1 316,00 

1 527,00 

1 633,00 

1 527,00 





377-24ST 

377-32ST 

377-36ST 

377-48ST 

377-48STU-02 

377-48STU-03 

24 well Sharktooth Comb, mylar 

0,2mm 


0,2mm 


0,2mm 


0,2mm 


0,2mm, * 


0,3mm, * 


1 54,00 

1 54,00 

1 54,00 

1 72,00 

1 79,00 

1 79,00


377-48STU-04 

377-64ST 

377-64STU-02 

377-64STU-03 

377-64STU-04 

377-72ST 

377-74STU-02 

377-74STU-03 

377-74STU-04 

377-80STU-02 

377-80STU-03 

377-80STU-04 

377-96ST 

377-96STU-02 

377-96STU-03 

377-96STU-04 

377-24WF 

377-34WF 

377-48WF 

377-64WF 


0,4mm, * 


0,2mm 


0,2mm, * 


0,3mm, * 


0,4mm, * 


0,2mm 


0,2mm, * 


0,3mm, * 


0,4mm, * 


0,2mm, * 


0,3mm, * 


0,4mm, * 


0,2mm 


0,2mm, * 


0,3mm, * 


0,4mm, * 

24 Well-Forming(square) Comb, 

mylar 0,2mm 


mylar 0,2mm 


mylar 0,2mm 


mylar 0,2mm 


1 79,00 

1 74,00 

1 79,00 

1 79,00 

1 79,00 

1 74,00 

1 79,00 

1 79,00 

1 79,00 

1 79,00 

1 79,00 

1 79,00 

1 74,00 

1 79,00 

1 79,00 

1 83,00 

1 59,00 

1 59,00 

1 94,00 

1 94,00


377-72WF 

Casting Combs 

377-55SE 

377-58SE 

377-60SE 

377-63SE 

377-73SE-02 

377-73SE-04 

Special Combs 

377-48HVST 

377-64HVST 

377-72HVST 

377-96HVST-02 

377-96HVST-03 

377-96HVST-04 

377-48ELST 

377-64ELST 

377-96ELST 


mylar 0,2mm 

5,5mm deep Straight Edge 

Comb,mylar 0,2mm 











48 well High Volume Sharktooth 

Comb, mylar 0,2mm 











48 well Extra Long Sharktooth Comb, 

mylar 0,2mm 


mylar 0,2mm 


mylar 0,2mm 

1 94,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 71,00 

1 71,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 

1 65,00 















This 96-well SBS standard "Sitting Drop" HTP protein crystallography plate is made of 

optical clear polystyrene. The buffer well has a novel D-form geometry located on the 

right, with the elevated round shape protein well located to the left. The plate can be 

filled manualy with pipettors or with robotic systems. 

The plate is sealed with optical clear sealing films as our Ultra-Clear Film cat.# G060/UC- 

RT 

To avoid fingerprints on the film, which could interfere with optical clarity, we recommend 

the use of our semi automatic MiniSealer 

Charakteristiks: SBS standard plate with 96 well,sitting drop vapor diffudion protein 

Crystallisation Plate (maximum volume 250 µl, and one corresponding prorein well 

(maximum 4,3 µl volume 




stackable 




G096-PC Crystallography Plate, 96 Well 84,00/10 395,00/50 

G060/UC-RT Ultra-Clear-Film 169,80/100 

Crystal Recognition Software 

Crystal Recognition Software (CRS) is an automated crystal-detection tool designed 

for integration in a HTP crystallography process. This Software was developed by 

scientists at the Lawrence Livermore National Laboratory (LLNL), participants in one 

of the nine US-government founded Protein Structure Initiative (PSI) centers. CRS 

can be integrated into any existing imaging system. 

Structural Genomic Process: the typical workflow of protein crystallography involves 

thousands of tredious and time-consuming observations and scoring of crystallisation 

experiment. In HTP production observing and scoring crystallisation experiments 

quickly becomes the most labor-intensive part of the work load. Now, CRS will 

perform all of the work for you. All you need to do is go see the pictures of the 

deteced crystals and give a final confirmation. 

The CRS provides the following advantages: CRS can be integrated into the imaging 

sytem of your choice 



increases the precision and speed of detection 

CRS distinguishes the difference between precipitate and crystal 

Easy - to - use 

CRS detects faint, small, and almost invisible crystals that are undetectable by visual 

inspection 

Fast (operational time of a few seconds) and reliable 

Cost-effective - no need to purchase a new imaging system because CRS can be 

integrated to your existing sytem 

A demo version is available on request. 


G096PC-CRS Crystal Recognition Software on request 

Quali - Microtest-Plates, 96 Well Polypropylene 

These 96-Well-Plates are made from highest quality medical grade 

polypropylene.They have an ultra-flat surface and are compatible with HTS and robotic 

liquid handling equipment (SBS-standard). Applications: sample storage and transport 

– screening – reagent transfer – HTP and Microtiter assay. 

They feature: 

available in round bottom (500µl), excellent for gentle cell manipulation and V-bottom 

(450µl) for efficient sample collection and manipulation 

raised "chimney" well rims reduce concernes for cross contamination and prodives 

surface area for effective heat and adhesive sealing applications 





Cat.# Description Color Pack size Euro 

G096-U Microtest-Plate, U-Form, 96 Well transparent 50 49,00 

G096-UBB Microtest-Plate, U-Form, 96 Well blue 50 69,00 

G096-UBG Microtest-Plate, U-Form, 96 Well green 50 69,00 

G096-UBR Microtest-Plate, U-Form, 96 Well red 50 69,00 

G096-UBY Microtest-Plate, U-Form, 96 Well yellow 50 69,00 

G096-UBW Microtest-Plate, U-Form, 96 Well white 50 69,00 

G096-UBS Microtest-Plate, U-Form, 96 Well black 50 69,00 

G096-V Microtest-Plate, V-Form, 96 Well transparent 50 49,00 

G096-VBB Microtest-Plate, V-Form, 96 Well blue 50 79,00 



G096-VBG Microtest-Plate, V-Form, 96 Well green 50 79,00 

G096-VBR Microtest-Plate, V-Form, 96 Well red 50 79,00 

G096-VBY Microtest-Plate, V-Form, 96 Well yellow 50 79,00 

G096-VBW Microtest-Plate, V-Form, 96 Well white 50 79,00 

G096-VBS Microtest-Plate, V-Form, 96 Well black 50 79,00 


Made from high our polystyrene, minimum of own fluorescence and highest 

optical quality. 




Lid orientation corner and condension rings on the lid reduce risk of 

contamination and condension 


Cat.# Description/Volume in ml/well Euro/100 Plates Euro/1000 plates 

G080-UB U-Form, 0,35 38,90 359,00 

G080-V V-Form, 0,34 38,90 359,00 

G080-F Flatt-botom, 0,41 38,90 359,00 

G080-D Lid 38,90 239,00 

G080-MP6 Makroplate, 6 well, 15 49,90 460,00 


Only optical clear and ultrapure plastics are used in the productionfor our cell- 

and tissue culure plates and have for microscopical examinations an unreached 

optical clearance. The plates feature: 


condensation rings avoid loss of material and change of osmolarity, no toxic 

residue from gamma sterilisation, 

alphanumeric well identification and lid orientation corners, 



price reductions for call-off orders 


Cat. # Description/volume in ml/well surface area unit Euro 

G080TC-UB TC-Plate, U-form, 0,35 0,35cm2 100 St. 149,90 

G080TC-V TC-Plate, V-form, 0,34 0,28cm2 100 St. 149,90 



G080TC-F TC-Plate, flat, 0,41 0,35cm2 100 St. 149,90 

G080TC-24F TC-Plate, 24 well, flat, 2,9 1,75cm2 100 St. 149,90 

G080TC-6F TC-Plate, 6 well, flat, 15 9,6cm2 100 St. 149,90 


Our petri dishes meet the highest requirements, optical transparency and optical clear 

for microscopy, high thermostability, plain surfaces, formstability and machine sterile 

production conform to standard-hygienic for multipurpose use in bacteriology. The plates 

are suited for filling of culture-media from automatic machines. The petri dishes are 

machine sterile for bacteriology and gamma sterile for tissue culture, 



Cat. # Form / Sterility Vents Euro / units Euro / units 

G090 not devided / m-sterile no 49,00 / 480 624,00 / 9600 

G091 not devided / m-sterile yes 49,00 / 480 624,00 / 9600 

G092 ½ devided / m-sterile yes 52,00 /490 847,00 / 9600 

G093 1/3 devided / m-sterile yes 56,00 /490 869,00 / 9600 

G094 ¼ devided / m-sterile yes 59,00 /490 898,00 / 9600 

G093 - TC not devided, gammasterile no 299,00 / 600 999,00 / 2400 

G094 -TC not devided, gammasterile yes 299,00 / 600 999,00/ 2400 



Advantages: widstanding manifold autoclaving ( +121°C ) deep temperature resistant up 

to -23°C, to use with most pens 


LT-54W white 19,1mm x 54m 10,50 



LT-54BL blue 19,1mm x 54m 10,50 

LT-54RO red 19,1mm x 54m 10,50 



LT-54RH Roll Holder 1 73,95 



Parafilm "M" 

Parafilm ist eine geschmeidige, wasserdichte, halbtransparente Folie für den 

Laborgebrauch zum Verschliessen von Gefäßen und Röhrchen. Sie ist praktisch 

geruchlos, resistent gegen Alkohol, Säuren und Basen in schwachen Konzentrationen 


Cat.# Description Dimension Euro 



Coated Microplates, 96-Well, 384-Well, 1536-Well for HTS and Cell Culture 

A new productline supports the HTS industry trend towards assay miniaturization and use of high density 

microplates. New 1536 Well Plates cover the range of assay volume from 1 to 10µl. For laboratories, that 

hesitate converting to the new 1636 style because of fluid handling chellenges and the need for investment 

in new screening instrumentation, we offer a 384 well low volume (5 – 20µl) plate. These plates are 

compatible with current 384-well robotics and plate reading devices and offer 80% savings in chemicals and 

assay reagents. 

The new coated 96 und 384 Well glass bottom plates offer superial optical performance for cell based HTS 

using high-resolution imaging. 

All plate formats are available custom coated with a wide range of ligandes, inclusive streptavidin, avidin, 

protein A, protein G, protein L, poly-Lysine, gelatine and fibronektin and ligandes of your choice. Some 

types of HTS assays require a very high surface density and capacity of ligands. Other assays depend on 

afiltration step as an intergral part of assay design. To adress these applications, we introduce membrane 

filterplltes in the 96 and 384 -well format. Available membranes are nitrocellulose, glass fiber, PVDF, 

polycarboat, polyester and nylon. 

Specialized engineered blocking-reagents for maximizing signal-to-noise ratio, which are prime design 

goals for HTS. Heterogenic assays, blocking agents are used to post coat microplates and to minimize non 

specific binding in incubation buffers. The blocking agents effectivly reduce non-specific-binding to 

microplate, glass, metal or membrane surfaces. Blocking reagents provide a hydrophilic coating and as a 

result, non specific adsorption of labeled nucleotides or protein based probesis graetly reduced and signalto 

noise ratio of the assay is enhanced. The used blockera are certified to be steril, DNase-, RNase und 

Protease frei. To offer the customer in the beginning the possibility of optimation of post-blocking, we offer a 

"Variety-Pack" including 1 plate each of BSA, BMT-2, BMT-4, unblocked at the price of a 5- Pack 

preblocked. 

(Cat. # VARxxxx, please replace xxxx cat.# of the plate of your choice 



All plates produced under industry leading preservation and vacuum 

packaging technology result in excellent repüroducability, stability and a shelf 

life of up to 2 years.The coated microplates are packed in custom multilayered 

foil barrier pouches and can be packed in 1-2-5 sleeves or stacks of 10-20- 

25/sleeve Highly efficient moisture adsorbend. 

If you do not find the plate/coating you are looking for, as a special 

service we coat your or our ligands on your plates! 

Streptavidin 

Avidin, 

neutral, 


96-well plate (330ul Volume) 

Biotin Protein 

A 

GaR 

IgG 

RaG 

IgG 

GaM 

IgG 

EURO 

10x2 

plates 




white-transp. 

bottom 

black-transp. 

bottom 













white-transp. 

bottom 

black-transp. 

bottom 








EURO 

Pre- 

blocked 

10x2 

plates 






white - transp. 

Bottom 

black - 

transp.bottom 



Cell Culture-Plates ( Poly-D-Lysine/L-Lysine/Collagen ) & Surface Modified Plates 

Poly-D- 

Lysine 

Poly- 

L- 

Lys 


transparent BZPD- 

1 

white 

black 

whitetransp. 

bottom 

blacktransp. 

bottom 




BZPD- 

2 

BZPD- 

3 

BZPD- 

4 

BZPD- 

5 

BZPD- 

6 

BZPD- 

7 

BZPD- 

8 

BZPL- 

1 

BZPL- 

2 

BZPL- 

3 

BZPL- 

4 

BZPL- 

5 

BZPL- 

6 

BZPL- 

7 

BZPL- 

8 

Typ I 

Collagen 


transparent BZPD- 

9 

white 

black 

whitetransp. 

bottom 

BZPD- 

10 

BZPD- 

11 

BZPD- 

12 

BZPL- 

9 

BZPL- 

10 

BZPL- 

12 

BZPL- 

13 

Hydrophilic Amino Carboxy 

Aldehyd, 

coupling 

amino 

groups 

Maleimide( 

coupling 

SH-groups 

) 

EURO/ 

15 x 2 

plate 


BZC-2 BH-2 BaM-2 BCa-2 BAl-2 BMa-2 426 







BZC- 9 BH- 9 

BZC-10 BH-10 

BZC-11 BH-11 

BZC-12 BH-12 


BAM- 

9 

BAM- 

10 

BAM- 

11 

BAM- 

12 

BCa- 9 BAl- 9 BMa- 9 568 

BCa-10 BAl-10 BMa-10 579 

BCa-11 BAl-11 BMa-11 579 

BCa-12 BAl-12 BMa-12 231


blacktransp. 

bottom 



BZPD- 

13 

BZPD- 

14 

BZPD- 

15 

BZPL- 

14 

BZPL- 

15 

BZPL- 

16 

BZC-13 BH-13 

BZC-14 BH-14 

BZC-15 BH-15 

384-well plates (Low–Volume = 25ul) 

white 

black 

BZPD- 

16 

BZPD- 

17 

BZPL- 

16 

BZPL- 

17 


tranparent 

white 

black 

whitetransp. 

bottom 

blacktransp. 

bottom 

BZPD- 

18 

BZPD- 

19 

BZPD- 

20 

BZPD- 

21 

BZPD- 

22 

BZPL- 

18 

BZPL- 

19 

BZPL- 

20 

BZPL- 

21 

BZPL- 

22 


BZC-16 BH-16 

BZC-17 BH-17 

BZC-18 BH-18 

BZC-19 BH-19 

BZC-20 BH-20 

BZC-21 BH-21 

BZC-22 BH-22 

BAM- 

13 

BAM- 

14 

BAM- 

15 

BAM- 

16 

BAM- 

17 

BAM- 

18 

BAM- 

19 

BAM- 

20 

BAM- 

21 

BAM- 

22 



BCa-13 BAl-13 BMa-13 231 

BCa-14 BAl-14 BMa-14 1130 

BCa-15 BAl-15 BMa-15 1130 

BCa-16 BAl-16 BMa-16 668 

BCa-17 BAl-17 BMa-17 668 

BCa-18 BAl-18 BMa-18 2495 

BCa-19 BAl-19 BMa-19 2645 

BCa-20 BAl-20 BMa-20 2645 

BCa-21 BAl-21 BMa-21 2995 

BCa-22 BAl-22 BMa-22 2995



P.O. Box 1329 


Germany 




phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


The following capillary tips are useful for loading gels as well as for recovery of samples from 

small orifice containers or tubes. 


0,5-10µl, compatibility: Eppendorf 0-5-10µl, 

Gilson P2, Oxford Benchmate orifice o.d. 

0,25mm, lenght of flexible capillary tip 

22mm, total lenght 62mm 


GSI025 1Rack á 204 tips 35,90 


1-200µl, compatibility: Eppendorf, Gilson, 

Finn, Biohit, orifice o.d. 0,54mm, lenght of 

flexible capillary tip 25mm 


GSI054B 1bag á 1000 tips 42,00 

GSI054R 5 Racks á 204 tips 58,00 

Gel loading tips with flat tip, Multiflex 

An ideal tip for gel loading in volume range 

from 0,1-10µl and 1-200µl. Available in two 

tip widths, the 0,37mm and the 0,17mm tip 

width is the optimum for loading 

sequencing gels. Fitting to commonly used 

pipettors, Dnase- Rnase free 

Cat. # 

Volume/ 

Compatibility 

Tip width/ 

form 

file:///F|/Kisker/Kisker/loading_d.htm (1 von 7) [08.12.2005 22:33:12] 

Packaging Euro


04NK10 0,1-10µl/ P2, P10 

02NK10 0,1-10µl/ P2, P10 

04N200 0,5-200µl/ 

Gils./Epp 

02N200 0,5-200µl/ 

Gils./Epp 

04N10 0,5-10µl/ Eppend. 

02N10 0,5-10µl/ Eppend. 


0,37mm/ 

short 

0,17mm/ 

short 

0,37mm/ 

long 

0,17mm/ 

long 

0,37mm/ 

long 

0,17mm/ 

long 

4 racks á 200 198 

4 racks á 200 268 

4 racks á 200 204,45 

4 racks á 200 268 

4 racks á 200 204,45 

4 racks á 200 268 

The Cell Saver Tips have an extra large tip orfice, to make the transfer of 

sensitive cells possible without damaging the cells. When using standard or 

"bevelled" tips, hybridomas, hepatocytes or macrophages could be damaged. 

Also the "DNA-shearing" of genomic DNA can be reduced. Cell Saver tips 

are also helpful when pipetting high viscous fluids. The clear Cell Saver tips 

are supplied in bags of 1000 tips or racks on request. 

The do fit to all common pipettors and are DNase-, RNase- and Pyrogen 

free. 


Cat. # Volume Pack.unit Euro Euro 

CSP250B 1 - 200µl 1 Bag á 1000 15,00 14,20 

CSP100B 100 - 1000µl 1 Bag á 1000 18,20 17,30 


This tip features a unique combination of a very thisn wall and ultra fine tip point. A flexible tip 

collar offers a particulary good fit on most 200 microliter pipettes including multi channel pipettes. 

Cat. # packaging Euro 

FT-1000 1 bag á 1000 63,40 

FT-96 6 racks á 96 58,20 

Akku-Pipettor-help 

file:///F|/Kisker/Kisker/loading_d.htm (2 von 7) [08.12.2005 22:33:12]


This Pipettor-help can be used with all pipettes from 0,1 – 100ml. 

Three speed modes for suck- and blow out operation make the work 

easy and comfortable. The pipettor help offers for different 

applications „fast fill“ – „slow drain off“ „slow suck“ – „fast blow out“ 

and further options. Speed will be controled by pressing the tigger. 

The Pipettor help is protected against overfilling, the fluid can can 

also flow out without motor support. 

It is protected by filterelementes, a charger is also in the delivery 

included. 


DPH-100 Pipettor-Help 0,1 – 100ml 1 Stück 299 

Rota-Akku-Pipettor-help 

This pipett filler combines a powerful motor with a lightweight design. 

The adjustable pipett nozzle rotates to three positions for maximum 

comfort (standard, 2-7,5!, 3-15°). Wide angel positions are better for 

limited space as under hoods, smal-angel positions work better for 

benchtop applications. 

The Rota-Filler fits comfortably in right or left hand. Two triggers 

provide precise control in two operation modes, blow out or gravity. 

The filler accomodates glass and plastic pipettes from 1 to 100 ml, a 

hydrophobic 0.45 micron filter preventes contamination. The pp pipet 

nozzle is autoclavable. 

A red low-battery indicator signals, when to recharge. 

The delivery includes: the filler with two replacement filters,a dual 

position charging stand and a magnetic/wall-mountable holder with 

screws. 

Cat.# Description Volume Euro 

DRP-100 Rota-Filler 0,1 – 100ml 1 pc 259 


Eight modells cover all volumes from 0,1µl to 10ml. A continuosly 

adjustable volumeter with digital readout allows simple and accurate 

dispensing. The robust construction along with the low thermal 

coefficient of the body of each XL3000i will prevent hand heat 

affecting sample measurements and reproducibility, even in 

prolonged usage. Being lighter as many other similiar pipettes, they 

are even more comfortable to hold and operate for extended periods - 

even in the smallest hand. 


advantages: 










DP-2 

DP-10 

DP-20 

DP-100 

DP-200 

DP-1000 

DP-5000 

DP-10ml 

P-2 1-Channel 

variable Volumen 

P-10 1-Channel 

variable Volume 









P-5000 1-Channal 


P-10ml 1-Channel 


+/- 12,0 to 1,5 0,1 – 2µl 159,00 

+/- 3,6 to 0,5 0,5 – 10µl 159,00 

+/- 4,0 bis 0,5 2 – 20µl 149,00 

+/- 1,6 bis 0,5 10 – 100µl 149,00 

+/- 1,2 bis 0,5 20 – 200µl 149,00 

+/- 0,9 bis 0,5 100 – 1000µl 149,00 

+/- 0,6 bis 0,5 1000 - 5000µl 169,00 

+/- 2,5 bis 0,5 

1000 - 

10.000µl 

220,00 


Denvilles XL3000i Multi-Channel Pipettes allow for comfortable pipetting by both 

right and left hand users. The plungers and ejector buttons are ergonomical located 

and operate smoothly. For comfortable pipetting in any direction, the tip manifold 

rotates 360°. The innovative ejector is curved, allowing the tips to be pushed off in 

steps, therefor reducing the amount of force required for ejection. 

The use of advanced, lightweight materials results in a pipette that will standup for 

constant use, yet is easy to hold, even during extended pipetting session. 

Advantages: 















DP-12- 

200 

DP-12- 

300 


12 - Channel manual +/- 1.4 bis 0,9 20 - 200µl 575,00 

12 - Channel manual +/- 1.4 bis 0,9 50 - 300µl 575,00 

The Biohit Proline Pipettes feature:* Precision, reproducable results and low 

weight * produced after DIN 12650, conformity certified DIN 12600. selfecalibrating, 

calibration free electronische Pipettes. fast delivery and repair 

service and two years warranty 

Biohit Proline EinChannelpipetten mit variabler Volumeneinstellung 

Cat. Nr. Descrition Volume Euro 

720005 1-channel variable Volume 0,1.-.2,5µl 185,00 

720000 1-channel variable Volume 0,5.-.10µl 175,00 









Biohit Proline 1-Channel pipettes with Fixed Volumen 




00722001 1-channel fix volume for 10µl(PCR) Tips 5 µl 89,00 

00722004 1-channel fix volume for 10µl(PCR) & 300µl Tips 10 µl 89,00 















00720210 8 - channel manual 0,5 - 10µl 350,00 



00720310 12-channel manual 0,5 - 10µl 420,00 




Biohit ePET + elektronische MehrChannelpipetten 

mit AC-Adapter 





710010ET 1 - channnel electronic 5– 100µl 289,00 



710200ET 8 - channnel electronic 0,2- 10µl 570,00 







710810ET 12 - channnel electronic 50- 1200µl 680,00 






P.O. Box 1329 


Germany 


Cell Saver Spitzen 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


Die Cell Saver Spitzen haben eine extra große Spitzenöffnung, um den 

Transfer empfindlicher Zellen zu ermöglichen und Zellbeschädigungen zu 

vermeiden. Wenn Standard oder "bevelled" Spitzen eingesetzt werden, 

können Hybridomas, Hepatozyten oder Makrophagen beschädigt werden, 

sowie "DNA-shearing" genomischer DNA reduziert werden. Die Cell Saver 

Spitzen sind auch eine Hilfe beim Pipettieren hoch viskoser Flüssigkeiten. 

Die klaren Cell Saver Spitzen werden in Beuteln zu 1000 Spitzen angeboten 

bzw.in Racks auf Anfrage. 

Die Spitzen passen zu allen gängigen Pipettenmarken und sind DNase-, 

RNase- und Pyrogen frei. 

1 VE = 1000 Tips 1- 4 VE 5 + VE 

Kat. # Volumen Pack.einheit Euro Euro 




Eine Kombination aus langer Spitze mit sehr feinem Auslass und sehr weichem Pipettenkopf. Der 

weiche Pipettenkopf passt sich mühelos dem Pipettenkonus an, der sichere Sitz sorgt 

insbesondere in Verbindung mit Mehrkanalpipetten für gleichmäßige Befüllung und Entleerung. 

Kat. # Pack.Einheit Euro 

FT-1000 1 Beutel á 1000 63,40 

FT-96 6 Racks á 96 58,20 

Quali - Tips, Gel - Auftrag und Spezialspitzen 


file:///F|/Kisker/Kisker/deutsch/loading_d.htm (1 von 8) [08.12.2005 22:33:13]


0,5-10µl passed für Eppendorf 0-5-10µl, 

Gilson P2, Oxford Benchmate, 

Außendurchmesser der Spitze 0,25mm, 

Länge der Kapillare 22mm, Gesamtlänge 

62mm 


GSI025 1 Rack á 204 Tips 35,90 


1-200µl passend für Eppendorf, Gilson, 

Finn, Biohit, 

Außendurchmesser der Spitze 0,54mm, 

Länge der Kapillare 25mm 


GSII054B 1Beutel á 1000 Tips 42,00 

GSII054R 5 Racks á 204 Tips 58,00 

Gel loading Tips mit flacher Spitze "Multiflex" 

Eine ideale Spitze zum Laden von Gelen 

im Volumenbereich von 0,1-10µl und 1- 

200µl. Verfügbar in zwei 

Spitzendurchmessern; die 0,37mm und 

0,17mm. 

Die Spitzen sind optimal zum 

Probenauftrag von Sequenz und SDS- 

PAGE-Gelen. Sie zeichnen sich aus durch 

höchste Pipettiergenauigkeit, sind DNase-, 

RNase frei und passen zu den meist 

benutzten Pipetten. 

Kat. # 

Volumen/ 

Passform 

04NK10 0,1-10µl/ 

P2, P10 

02NK10 0,1-10µl/ 

P2, P10 

04N200 0,5-200µl/ 

Gils./Epp 

02N200 0,5-200µl/ 

Gils./Epp 

Spitzendicke/Form Pack.einheit Euro 

0,37mm/ kurz 4 Racks á 200 198 

0,17mm/ kurz 4 Racks á 200 268 

0,37mm/ lang 4 Racks á 200 204,45 

0,17mm/ lang 4 Racks á 200 268 



04N10 

02N10 

0,5-10µl/ 

Eppend. 

0,5-10µl/ 

Eppend. 

Akku-Pipettierhilfe 

0,37mm/ lang 4 Racks á 200 204,45 

0,17mm/ lang 4 Racks á 200 268 

Diese Pipettierhilfe kann mit allen Pipetten von 0,1 – 100ml benutzt 

werden. Drei Geschwindigkeitseinstellungen für die Ansaug- und 

Austoßoperation gestalten die Arbeit einfacher und komfortabler. Je 

nach Anforderung bietet die Pipettierhilfe „schnell füllen“ – „langsam 

ablassen“ „langsam ansaugen“ – „schnell ablassen“ sowie weitere 

Optionen.Durch entsprechende Knopfeinstellung wird die 

gewünschte Pipettiergeschwindigkeit festgelegt. Eine Feinregelung 

erfolgt durch den unterschiedlichen Druck der Bedienerknöpfe. Die 

Pipettierhilfe ist gegen Überfüllen geschützt, die Flüssigkeit kann 

ohne Motorunterstützung frei ablaufen 

Die Pipettierhilfe ist zur Sicherheit mit Filterelementen ausgestattet, 

zum Lieferumfang gehört auch ein Ladegerät. 


DPH-100 Pipettierhilfe 0,1 – 100ml 1 Stück 299 

Rota-Akku-Pipettierhilfe 

Dies flexible Pipettierhilfe kann zusätzlich zur Standardstellung in 

einem kurzen Winkel von 7,5° oder in einem langen Winkel mit 15° 

eingestellt werden. Der Griff hat eine speziell behandelte rutschfeste 

Oberfläche und gewährt so eine komfortabele Nutzung in Verbindung 

mit Handchuhen. Zudem ist der Griff sowohl für Rechts- als auch 

Linkshänder geeignet. 

Die Pipettierhilfe ist geeignet für Glas- oder Plastikpipetten im 

Volumenbereich von 1 – 100ml. 

Durch entsprechende Knopfeinstellung wird die gewünschte 

Pipettiergeschwindigkeit festgelegt. Eine Feinregelung erfolgt durch 

den unterschiedlichen Druck der Bedienerknöpfe Pipettennase, - 

halterung und –filter können autoklaviert werden. 

Die Lieferung erfolgt inklusive Pipettenhalterung und Ladegerät. 


DRP-100 Pipettierhilfe 0,1 – 100ml 1 Stück 259 

Denville-Pipetten "XL3000i" 



Mit acht unterschiedlichen Modellen steht eine hochqualitative 

Pipettenserie im Volumenbereich von 0,1µl bis 10ml zur Verfügung. 

Die Vorzüge der Denville - Pipetten auf einen Blick: 

- klassisches Profil, ergonomisches Design und Präzision, 

- Reproduzierbarkeit und Langlebigkeit 

- Volumen stufenlos einstellbar 

- 20% leichter als vergleichbare Modelle 


- Tip-Ejektor einstellbar zur Verwendung unterschiedlicher Spitzen- 

Marken 


- abnehmbares Unterteil autoklavierbar 

Kat. 

Nr. 

DP-2 

DP-10 

DP-20 

DP-100 

DP-200 

DP- 

1000 

DP- 

5000 

DP- 

10ml 

Bezeichnung Unrichtigkeit (%) Volumen Euro 

P-2 1-Kanal 

variables Volumen 

P-10 1-Kanal 


P-20 1-Kanal 


P-100 1-Kanal 


P-200 1-Kanal 


P-1000 1-Kanal 


P-5000 1-Kanal 


P-10ml 1-Kanal 


+/- 12,0 bis 1,5 0,1 – 2µl 159,00 

+/- 3,6 bis 0,5 0,5 – 10µl 159,00 

+/- 4,0 bis 0,5 2 – 20µl 149,00 

+/- 1,6 bis 0,5 10 – 100µl 149,00 

+/- 1,2 bis 0,5 20 – 200µl 149,00 

+/- 0,9 bis 0,5 100 – 1000µl 149,00 

+/- 0,6 bis 0,5 1000 - 5000µl 169,00 

+/- 2,5 bis 0,5 

1000 - 

10.000µl 

220,00 

Denville-MehrkanalPipetten "XL3000i" mit variabler Volumeneinstellung 



Denvilles XL3000i Mehrkanalpipetten lassen sich komfortabel für Rechts- und 

Linkshänder benutzen. Die Bedienerknöpfe sind ergonomisch und 

daumenschonend angebracht, der Pipettenschaft kann um 360° gedreht werden. 

Durch die Verwendung von innovativen, leichtgewichtigen Materialien sind auch 

längere Einsatzzeiten für den Anwender unproblematisch. Jeder Kanal der Pipette 

ist individuell angelegt, um grösste Präzision und Reproduzierbarkeit der 

Pipettierschritte zu garantieren. Die Mehrkanalpipetten sind als 8- und 12-Kanal- 

Pipetten in überlappenden Volumenbereichen erhältlich. 

Die Vorteile im Überblick: 

- bis zu 20 % leicher als vergleichbare Modelle 

- 360° rotierbares Unterteil 

- individuelle Kolben und Spitzenkoni für jeden Führungskanal 


gerundeter Ejektor zur Kraftverminderung 





DP-8- 

200 

DP-8- 

300 

DP-12- 

50 

DP-12- 

200 

DP-12- 

300 

8 - Kanal manuell +/- 1.4 bis 0,8 20 - 200µl 499,00 

8 - Kanal manuell +/- 1.4 bis 0,9 50 - 300µl 499,00 

12-Kanal manuell +/- 3.0 bis 1,2 5 - 50µl 575,00 



Biohit - Pipetten 

Die Vorzüge der Biohit Proline Pipetten auf einen Blick:* Präzision, 

reproduzierbare Ergebnisse. und Leichtgewichtigkeit * Bauart nach DIN 

12650, Konformitätsbescheinigung nach DIN 12600. selbst-kalibrierbar, 

kalibrierungsfreie elektronische Pipetten. schneller Liefer- und 

Reparaturservice und Zweijahresgarantie 



Biohit Proline Einkanalpipetten mit variabler Volumeneinstellung 


00720005 1-Kanal variables Volumen 0,1.-.2,5µl 185,00 

00720000 1-Kanal variables Volumen (PCR) 0,5.-.10µl 175,00 









Biohit Proline Einkanalpipetten mit Festvolumen 

Kat. Nr. Einkanalpipetten Bezeichnung Volumen Euro 

00722001 1-Kanal Festvolumen für 10µl(PCR) 5 µl 89,00 

00722004 1-Kanal Festvolumen für 10µl(PCR) & 300µl Tips 10 µl 89,00 











Biohit Proline Mehrkanalpipetten mit variabler Volumeneinstellung 






00720210 8 - Kanal manuell PCR 0,5 - 10µl 350,00 



00720310 12-Kanal manuell 0,5 - 10µl 420,00 

00720320 12-Kanal manuell 5 - 50µl 420,00 

00720340 12-Kanal manuell 50 – 300µl 420,00 

00720370 12-Kanal manuell, hard tip core 50 – 300µl 420,00 

Biohit ePET + elektronische Ein- und 

Mehrkanalpipetten mit AC-Adapter 

Kat. # Bezeichnung Volumen Euro 

710520ET 1 - Kanal elektronisch 0,2 - 10µl 319,00 

710010ET 1 - Kanal elektronisch 5– 100µl 289,00 



710200ET 8 - Kanal elektronisch (PCR) 0,2- 10µl 570,00 

710210ET 8 - Kanal elektronisch 5 - 100µl 519,00 



710300ET 12-Kanal elektronisch 0,2 - 10µl 680,00 

710310ET 12-Kanal elektronisch 5 - 100µl 619,00 

710320ET 12-Kanal elektronisch 25 – 250µl 619,00 

710810ET 12-Kanal elektronisch 50- 1200µl 680,00 








P.O. Box 1329 


Germany 


Mikrovolumen Spitzen und "bevelled" Tips 

Für viele Anwendungen, speziell in der Molekularbiologie und 

Immunologie sind Qualität und Genauigkeit der Spitzen extrem 

wichtig. Unsere Spitzen sind von höchster Qualität, um die 

Reproduzierbarkeit Ihrer Experimente zu gewähren: 

Die Vorteile: 

die Chemie: 99,9% reines Polypropylen, Metall frei, und frei von 

Zusätzen, Farb-/Füllstoffen die Produktion: in hoch polierten Formen 

ohne Zusatz von kontaminierenden Flüssigkeiten. 

die Spitzenform: exakte Passform - exakte Spitzenöffnung und 

Transparenz 

die Biologie: DNase-, RNase-, Pyrogen frei der "bevel"Tips, der 

Winkel der Spitze reduziert die Oberfläche der Spitzenöffnung und 

reduziert kombiniert mit ultradünner Öffnung den Kapillareffekt,. das 

pipettierte Probenvolumen ist genauer. 

die Passform: die "bevelled" Tips passen zu einer großen Anzahl von 

Pipetten und sind ideal für Labors mit unterschiedlichen Marken. 

GC.TIP 0,1-10µl: Gilson P2 & P10, Eppendorf Res./Ref. 2,5µl & 10µl 

(20µl), Finn 2µl, Biohit Multichannel 10µl, Benchmate 2 & 10µl, 

Denville DP-2, DP-10 

EC.TIP 0,5-20µl: Eppendorf Res./Ref. 10µl, Fin 2µl, Biohit 


T002/T004: universal zu allen gängigen Pipetten passend 

T005 (300µl) Finn Multichannel 50-300µl, Capp Aero 50-300µl, Biohit 



phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


1-19 VE 20 VE+ 40 VE + 


GC.TIPS.B / Beutel- 

1000 

GC.TIPS.R/ Rack- 

10x96 

EC.TIPS.B / Beutel- 

1000 

0,1-10µl / klar 14,85 14,30 13,55 

0,1-10ml / klar 29,10 27,50 25,50 

0,5-20µl / klar 14,85 14,30 13,55 

EC.TIPS.R /Rack-10x96 0,5-20µl / klar 29,10 27,50 25,50 

file:///F|/Kisker/Kisker/deutsch/pipet_d.htm (1 von 9) [08.12.2005 22:33:16]


T002B / Beutel-1000 1-200µl / gelb 15,30 14,50 13,55 

T002B.R / Rack-10x96 1-200µl / gelb 29,10 27,50 25,50 

T005B / Beutel-1000 1-300µl / klar 16,80 15,95 15,20 

T005B / Rack-10x96 1-300µl / klar 35,30 33,50 31,85 

T004B / Beutel-1000 100-1000µl / blau 15,75 15,00 14,30 

T004BR / Rack-10x100 100-1000µl / blau 36,80 35,00 33,20 

Sterile Pipettenspitzen, "bevelled" Low Retention 

Verschieden Anwendungen, wie z. B. Zellkultur, 

erfordern sterile Atbeitsbedingungen. Höchste 

Qualität und Passform gewähren die 


99,9% reines Polypropylen, Metall frei und frei von 

Zusätzen, Farb-/Füllstoffen 

exakte Passform - exakte Spitzenöffnung und 

Transparenz 

Low Retention für vollkommenen Probenauslauf 



T002B.R-SMR / Rack- 

10x96 


10x100 

Pipettenspitzen - Eppendorf kompatibel 

1-200µl / klar 10 Racks á 96 Tips 39,90 

100-1000µl / klar 10 Racks á 96 Tips 43,80 

Diese Spitzen sind 100% kompatibel mit Eppendorf-Pipetten entsprechender 

Volumenbereiche und können problemlos in den Eppendorf Racks eingesetzt 

werden. Höchste Qualität und Passform gewähren die Reproduzierbarkeit Ihrer 

Experimente: 

99,9% reines Polypropylen, Metall frei, und frei von Zusätzen, Farb-/Füllstoffen 



Graduierung zu Überprüfung des pipettierten Volumens 

problemloser Einsatz in der Eppendorf Arbeitsbox 


ETY02.B 1-200µl / gelb 2 x 500 Tips 14,85 



ETY02.R 1-200µl / gelb 10 Racks á 96 Tips 29,95 

ETB04.B 100-1000µl / blau 2 x 500 Tips 16,90 

ETB04.R 100-1000µl / blau 12 Racks á 96 = 1.152 Tips 47,90 

Quali - Tips, "Low Retention" Spitzen ( Maxymum Recovery Spitzen ) 

Unsere "Low Retention" Spitzen (Maxymum-Recovery-Spitzen) sind 

aus hochreinem Polypropylen gefertigt, autoklavierbar und 

unterliegen einer ständigen Qualitätskontrolle. Die Spitzen sind 

konisch zulaufend (200µl und 1000µl "bevelled"), um die Präzision zu 

erhöhen. 

Die Produktion von "Low Retention" Spitzen basiert auf einem neuen 

Verfahren ohne Zusätze von Silikon, welches in Experimenten stören 

könnte. Der Effekt sind extrem glatte Oberflächen und 60% bessere 

Ergebnisse als mit silikonisierten Spitzen. 

Beim Einsatz im Mikroliterbereich, insbesondere bei der PCR und 

anderen molekularbiologischen Anwendungen, aber auch bei 

quantitativen Versuchen, bei denen es auf Präzision ankommt, bieten 

diese Spitzen das Optimum an Genauigkeit und garantieren, dass 

DNA, Enzyme und Proteine ohne Verlust pipettiert werden können. 

Die "Low Retention" Spitzen sind zertifiziert DNase-, RNase-, 

Pyrogen frei! 

Passformen siehe vorherige Produktgruppe "Mikrovolume und 

bevelled" Tips 

Kat. # / Pack.einheit 

Volumen / 

Farbe 

1-19 VE 20 VE+ 40 VE + 

Euro Euro Euro 

GC.TIPS.BSi/Beutel-1000 0,1-10µl / klar 19,40 17,95 16,50 

GC.TIPS.RSi/Rack-10x96 0,1-10µl / klar 35,55 33,50 29,15 

EC.TIPS.BSi/Beutel-1000 0,5-20µl / klar 19,40 17,95 16,50 

EC.TIPS.RSi/Rack-10x96 0,5-20µl / klar 35,55 33,50 29,15 

T002BSi/ Beutel-1000 1-200µl / klar 19,40 17,95 16,50 

T002B.RSi / Rack-10x96 1-200µl / klar 35,55 33,50 29,15 

T004BSi / Beutel-1000 

T004BRSi /Rack-10x100 

100-1000µl / 

klar 

100-1000µl / 

klar 

file:///F|/Kisker/Kisker/deutsch/pipet_d.htm (3 von 9) [08.12.2005 22:33:16] 

19,95 18,90 17,90 

44,90 42,00 39,30


Quali - Standard Spitzen, graduiert 

Mit dieser Produktlinie bieten wir preiswerte Spitzen guter Qualität für 

Standardanwendungen an. Die neue Spitze "VL700G" bieten wir jetzt 

in erheblich verbesserter Qualität wie z.B. mit Graduierung an. Die 

1000µl-Spitze ist im Vergleich zu herkömmlichen Spitzen deutlich 

länger (86mm) und ermöglicht die Probenentnahme auch aus 

längeren Röhrchen. 

Die Spitzen passen zu: VL700G: Gilson P20,P100,P200, Nichirio, 

Socorex, Eppendorf, Biohit Proline u. a. VL004G:Gilson P1000; 

Eppendorf Res./Ref. 1000µl; Biohit; Socorex; Brand u.a. 

1VE = 1000 Tips 1-19 VE 20 VE+ 50 VE+ 

Kat. # Volumen / Farbe Euro Euro Euro 

VL700G 1- 200µl / gelb 5,95/1000 5,65 4,95 

VL700GR 1- 200µl / gelb 25,00/10x96 23,00/10x96 21,00/10x96 

VL004G 200- 1000µl / blau 7,30/1000 6,95 6,25 

VL004SHO 

200- 1000µl / 

blau, kurzstandard 

StackRacks - die Platzsparer 

7,30/1000 6,95 6,25 

Sparen Sie Zeit und Lagerplatz. Unsere meist verwendeten Spitzen bieten wir 

jetzt auch als Stapelracks an. Die verwendeten Spitzen aus unserem 

"Mikrovolumen und bevelled" Spitzen Progamm sind mit allen gängigen 

Pipetten kompatibel. Jeweils 5 Racks á96 Spitzen sind übereinander 

gestapelt. Nach Verbrauch der ersten Lage, steht die nächste gleich zur 

Verfügung. 

Die Spitzen sind zertifiziert DNase-, RNase-, pyrogen- und metallfrei. 

Die Racks bieten hervoragende Stabilität, das System ist auch für 

Mehrkanalpipetten bestens geeignet und ist vollständig autoklavierbar. 


GC.TIPS.STK 0,1-10µl / klar 10 Stapel á5Racks=4800 Spitzen 149,00 

T200-Y-STK 1-200µl / gelb 10 Stapel á5Racks=4800 Spitzen 129,00 

Quali - Roboter Tips, klar 



- entsprechend den exakten Maßen der Laborautomaten für absolute 

Kompatibilität 


neu: 250µl mit weiter Spitzenöffnung und Spitzen im 384-well Format 













RBW-R250 250µl, B.Biomek, wide bore 50 Racks á96 Tips 199,00 





RBFX-R384 

RBFX-RS384 

0,5-30µl, Beckman Biomek 

FX 

0,5-30µl, Beckman Biomek 

FX 

50 Racks á384 Tips 2.792,00 

50 Racks á384 Tips, steril 2.792,00 





RBM-R20 

20µl, Packard Mini- 

/PlateTrak 


50 Racks á96 Tips 219,00


RBM-R50 

RBM-R200 


/PlateTrak 


/PlateTrak 

50 Racks á96 Tips 199,00 







RT-R50 50µl, Tecan GenMate 50 Racks á96 Tips 344,00 

RT-R250 250ml, Tecan GenMate 50 Racks á96 Tips 479,00 

Quali - Roboter Tips, Low Retention mit und ohne Filter 

-"Low Retention" für optimalen Spitzenauslauf, daher minimaler 

Probenverlust 

- auch als sterile Filterspitze zur Vermeidung von Kreuzreaktionen lieferbar 


















RBFX-R250-MR 

RBFX-RS250-MR 

250µl, Beckman Biomek 

FX 


FX 


50 Racks á96 Tips, steril 219,00 








ABFX18S-MR 


FX 

50 Racks á96 Filtertips, steril 479,00 






Quali - Roboter Tips, konduktiv ( schwarz ) 

Mit der Einführung dieser Spitzen entsprechen wir vielfachen 

Kundenwünschen. Konduktiv-schwarze Spitzen stehen jetzt auch für 

Canberra Packard I, II und IIEX sowie Beckman Span 8 zur Verfügung. 

Für den Beckman Span 8 bieten wir zusätzlich konduktiv-schwarze 

sterile Filterspitzen an. Alle Spitzen sind zertifiziert DNase-, RNase- 

und pyrogenfrei 





RBK-SP-S- 

20 

20µl, Beckman Span-8 50 Racks á96 Tips, steril 539,00 


RBK-SP-S- 

50 

50µl, Beckman Span-8 50 Racks á 96 Tips, steril 539,00 


RBK-SP-S- 

250 

RBK-SP-FS- 

20 

RBK-SP-FS- 

30 

RBK-SP-FS- 

180 

250µl, Beckman Span-8 50 Racks á96 Tips, steril 539,00 

20µl, Beckman Span-8 



50 Racks á96 Filtertips, 

steril 


steril 


steril 

599,00 

599,00 

599,00 





PMK-250 

PMK-S-250 

PMK-R250 

250µl, Packard 

Multiprobe 


Multiprobe 


Multiprobe 


50 Racks á96 Tips, steril 435,00 










PMK-T250 


Multiprobe 


50 Trays á96 Tips 345,00







P.O. Box 1329 


Germany 



For many application, especially in molecular biological and 

immunological applications the quality and accuracy of a tip is very 

important. With our tips you get the highest available quality and 

reproducability for your experiments: 

* the chemistry: 99,9% pure polypropylen, metall free, and free of 

lubricants, dyes or fillers 

* the production: in high diamond polished forms without use of 

contaminating releasing fluids during the manufactoring, which results 

in a transparent product and reduces the adherance of liquid to the 

surface 

* the tip-form: exact fitting to pipettes - exact tip orifice and 

transparency. 


* the bevel: the angel on our beveled tips reduces the surface area of 

the tip orfice with the receiving vessel. This angel combined with an 

ultra-thin orfice reduces the effect of liquid samples creeping up the 

side of the tip ( capillary effect). By reducing this capillary effect our 

tips dispense more accurate. 

* Compatibility: the beveled tips are fitting to a wide range of pipettors 

and ideal for labs with multiple brands of pipettors. 

The universal grip design and the flexible material with a serie of 

bands produce a positive seal. 

GC.TIP 0,1-10µl: Gilson P2 & P10, Eppendorf Res./Ref. 2,5µl & 10µl, 

Finn 2µl, Biohit Multichannel 10µl, Benchmate 2 & 10µl, Denville DP- 

2/DP-10 



T005: Finn Multichannel 50-300µl, Capp Aero 50-300µl, Biohit 

Multichannel 50-250µl 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 




GC.TIPS.B / bag-1000 0,1-10µl / clear 14,85 14,30 13,55 

file:///F|/Kisker/Kisker/pipet_d.htm (1 von 10) [08.12.2005 22:33:18]


GC.TIPS.R/ rack- 

10x96 

0,1-10ml / clear 29,10 27,50 25,50 

EC.TIPS.B / bag-1000 0,5-20µl / cleat 14,85 14,30 13,55 

EC.TIPS.R /rack- 

10x96 

0,5-20µl / clear 29,10 27,50 25,50 


T002B.R / rack-10x96 1-200µl / yellow 29,10 27,50 25,50 


T005B / rack-10x96 1-300µl / yellow 35,30 33,50 31,85 

T004B / Bag-1000 

T004BR / Rack- 

10x100 

100-1000µl / 

blue 

100-1000µl / 

blue 

Sterile Tips, "bevelled" Low Retention 

Many applications require sterile techniques. 

Highest quality and passform garant reproducability 

of your experiments 

99,9% pure polypropylene, metal free and free of 

additives 

exact passform - exact tip opening and 

transparency 



15,75 15,00 14,30 

36,80 35,00 33,20 




10x100 


file:///F|/Kisker/Kisker/pipet_d.htm (2 von 10) [08.12.2005 22:33:18] 

100-1000µl / clear 10 racks of 96 tips 43,80


These Tips are 100% compatibel with Eppendorf-Tips in the corresponding 

volume and can be used without problems in Eppendorf Racks. Highest quality 

and passform garant reproducibility of your experiments 







ETY02.B 1-200µl / gelb 2 x 500 tips 14,85 

ETY02.R 1-200µl / gelb 10 racks of 96 tips 29,95 

ETB04.B 100-1000µl / blau 2 x 500 tips 16,90 

ETB04.R 100-1000µl / blau 12 racks of 96 = 1.152 tips 47,90 


Our 'Low Retention' tips replace the formerly siliconized tips. They 

are made from high pure polypropylene. The 20µl & 1000µ siliconized 

tips are beveled, to increase the precision. The 'Low Retention' is 

based on a a new technology production, where no silicone is added 

during or after the production, which could disturb in any 

experiments. This process causes extremly smoth tips and minimises 

liquid retention. The result is 60% better as with siliconized tips. This 

product gives the confidence, that the full amount of DNA, enzymes 

or proteins is captured for testing purposes and provides more 

reliable results. 

The tips are fully autoclavable and certificated DNase-, RNase-, 

pyrogen- and metall free. 

Compatibility: the "bevelled" Tips fit to a wide range of pipettors and 

are very useful for labs using different brands of pipettors in same 

lab. 

GC.TIP 0,1-10µl: Gilson P2 & P10, Eppendorf Res./Ref. 2,5µl & 10µl, 

Finn 2µl, Biohit Multichannel 10µl, Benchmate 2 & 10µl, Denville DP- 

2/DP-10/DP-8-10 




T005 (300µl) Finn Multichannel 50-300µl, Capp Aero 50-300µl, Biohit 



1-19 

units 

20 units+ 40 units +


Cat. # / packaging 

GC.TIPS.BSi/bag-1000 

GC.TIPS.RSi/rack-10x96 

EC.TIPS.BSi/bag-1000 

EC.TIPS.RSi/rack-10x96 

T002BSi/ bag-1000 

T002B.RSi / rack-10x96 

T004BSi / Bag-1000 

T004BRSi /Rack-10x100 

Volume / 

color 

0,1-10µl / 

clear 

0,1-10µl / 

clear 

0,5-20µl / 

clear 

0,5-20µl / 

clear 

1-200µl / 

clear 

1-200µl / 

clear 

100-1000µl / 

clear 

100-1000µl / 

clear 


Euro Euro Euro 

19,40 17,95 16,50 

35,55 33,50 29,15 

19,40 17,95 16,50 

35,55 33,50 29,15 

19,40 17,95 16,50 

35,55 33,50 29,15 

19,95 18,90 17,90 

44,90 42,00 39,30 

With this product line we offer very economical tips for standard 

applications. The new tip VL700G could be improved in quality and 

shows now graduation. Standard yellow tips are offered as bulk packs 

only in bags of 1000 Tips and in racks. The blue tips are extra long 

(86mm), which allows to sample manipulation in deeper tubes. 



VL004G: Gilson P1000, Biohit Proline, Eppendorf Res./Ref. 1000µl, 

Biohit, Socorex, Brand a.o. 


Cat. # Volume / Color Euro Euro Euro 

VL700G 1- 200µl / yellow 5,95/1000 5,65 4,95 

VL700GR 1- 200µl / yellow 25,00/10x96 23,00/10x96 21,00/10x96 

VL004G 

200- 1000µl / 

blue 


7,30/1000 6,95 6,25


VL004SHO 

200- 1000µl / 

blau, shortstandard 


7,30/1000 6,95 6,25 

Save time and place. Our most used tipe are now also available as 

StackRacks an. The used tips are "bevelled“, autoclavable, certified DNase-, 

RNase-, pyrogen free and very useful for multichannel pipettors. Easy to use: 

5 Racks with 96 tips each are stacked together.Use the first one and find next 

ready to use below. 

Cat. # Volume / Color Unit Euro 

GC.TIPS.STK 0,1-10µl / clear 

T200-Y-STK 1- 200µl / yellow 

Quali - Robotic Tips, clear 

10 stacks with 5 racks = 

4,800 tips 

10 stacks with 5 racks = 

4,800 tips 

Our robotic tips are made to exact dimensions of OEM tips to ensure 

automation compatibility.Like all our tips, our robotic tips ensure an airtight 

seal to your robotic system for accurate dispensing. These tips are cerfified 


149,00 

129,00 

Cat. # tip type packaging Euro 














RBW-R250 

RBFX-R20 

RBFX-RS20 

RBFX-R50 

RBFX-RS50 

RBFX-R384 

RBFX-RS384 

RBFX-R250 

RBFX-RS250 

250µl, B.Biomek, wide 

bore 


FX 


FX 


FX 


FX 

0,5-30µl, Beckman 

Biomek FX 

0,5-30µl, Beckman 

Biomek FX 


FX 


FX 

50 racks á 96 tips 199,00 

50 racks á 96 tips 199,00 

50 racks á 96 tips, steril 219,00 

50 racks á 96 tips 209,00 


50 racks á 384 tips 2.792,00 

50 racks á 384 tips, steril 2.792,00 

50 racks á 96 tips 199,00 




RBM-R20 

RBM-R50 

RBM-R200 


/PlateTrak 


/PlateTrak 


/PlateTrak 

50 racks á 96 tips 219,00 

50 racks á 96 tips 199,00 

50 racks á 96 tips 199,00 






RT-R50 50µl, Tecan GenMate 50 racks á 96 tips 344,00 

RT-R250 250ml, Tecan GenMate 50 racks á 96 tips 479,00 



Quali - Roboter Tips, Low Retention with and without Filter 

The 'Low Retention' is based on a a new technology production, where no 

silicone is added during or after the production, which could disturb in any 

experiments. This process causes extremly smoth tips and minimises liquid 

retention. 

- available also as sterile Filtertips to avoid cross-contaminations 

- certified DNase-, RNase- und pyrogen free 


RB-B20-MR 

RB-R20-MR 

RB-RS20-MR 

RB-B50-MR 

RB-R50-MR 

RB-RS50-MR 

RB-B250-MR 

RB-R250-MR 

RB-RS250-MR 

RBFX-R20-MR 

RBFX-RS20-MR 

RBFX-R50-MR 

RBFX-RS50-MR 

RBFX-R250-MR 

20µl, Beckman 

Biomek 


Biomek 


Biomek 


Biomek 


Biomek 


Biomek 


Biomek 


Biomek 


Biomek 


Biomek FX 


Biomek FX 


Biomek FX 


Biomek FX 


Biomek FX 


10 bags á1000 tips 191,00 

50 racks á96 tips 239,00 

50 racks á96 tips, 

steril 

289,00 

10 bags á1000 tips 189,00 



steril 

297,00 

10 bags á1000 tips 189,00 



steril 

289,00 



steril 

219,00 



steril 

339,00 

50 racks á96 tips 199,00


RBFX-RS250-MR 

RBP-R50-MR 

RBP-R200-MR 

ABB20S-MR 

ABB50S-MR 

ABB180S-MR 

ABFX20S-MR 

ABFX50S-MR 

ABFX18S-MR 

ABMM50S-MR 

ABMM180S-MR 

ABPM20S-MR 

ABPM50S-MR 

ABPM180S-MR 


Biomek FX 


Minitrack 


Minitrack 


Biomek 


Biomek 


Biomek 


Biomek FX 


Biomek FX 


Biomek FX 


Multimek 


Multimek 


MiniTrack 


MiniTrack 


MiniTrack 

Quali - Roboter Tips, conductiv ( black ) 



steril 

219,00 



50 racks á96 filtertips, 

steril 

50 Racks á96 

Filtertips, steril 


steril 


steril 


steril 


steril 


steril 


steril 


steril 


steril 


steril 

555,00 

555,00 

555,00 

479,00 

479,00 

479,00 

429,00 

429,00 

479,00 

479,00 

479,00


Mit der Einführung dieser Spitzen entsprechen wir vielfachen 

Kundenwünschen. Konduktiv-schwarze Spitzen stehen jetzt auch für 

Canberra Packard I, II und IIEX sowie Beckman Span 8 zur Verfügung. 

Für den Beckman Span 8 bieten wir zusätzlich konduktiv-schwarze 

sterile Filterspitzen an. Alle Spitzen sind zertifiziert DNase-, RNase- 

und pyrogenfrei 








RBK-SP-FS- 

20 

RBK-SP-FS- 

30 

RBK-SP-FS- 

180 





steril 


steril 


steril 

599,00 

599,00 

599,00 
























P.O. Box 1329 


Germany 



Our hydrophobic filter tips eliminate aerosols 

completly. The tips are sterilized by gammaradiation 

and are important to avoid crosscontaminations 

of sample fluids or vapors from 

contacting the pipettors shaft. Especially important 

is theuse of filter tips with all PCR-techniques , 

where contamination with unwanted DNA through 

the pipettor can lead to wrong results. Also the filter 

tip protects the pipettor, if you are handling with 

radioactice, corrosive or biohazardous samples. 

The tips have the beveled form for absolutly 

precision and are certified DNase-, RNase- and 

pyrogen free! 


1 unit = 

10x96 tips 

racked 

1-4 

units 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


5-9 units 10 units 


A300S 

A300SLong 

A250S 

A400S 

A20S 

A50S 

A100S 

0,1 - 

10µl 

0,1 - 

10µl 

0,1 - 

2,5µl 

0,5 - 

10µl 

0,5 - 

20µl 

1,0 - 

50µl 

1,0 - 

100µl 

file:///F|/Kisker/Kisker/filter_d.htm (1 von 4) [08.12.2005 22:33:20] 

Gilson P2 P10 62,95 59,85 54,75 

Gils.P2,P10,Epp. 89,80 -- -- 

Epp.0,1-2,5µl,P2 89,80 -- -- 

Eppend.0,5-10µl 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

Universal 62,95 59,85 54,75


A150S 

A200S 

A350S 

A1000S 

1,0 - 

150µl 

1,0 - 

200µl 

1,0 - 

300µl 

100 - 

1000µl Universal 


Universal 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

Finn,Capp 62,95 59,85 54,75 

68,00 

(10x100) 

63,95 57,95 

These filter tips feature same characteristics as above, but are not 

sterilized by gamma-radiation. They are produced and packed under clean 

room conditions and are also certified DNase-, RNase- und pyrogen free. If 

necessary the filter tips can be sterilized by autoclaving without damaging 

the filter using following procedure: at 120°C under 15 PSI for 10- 

15minutes. Do not exceed as excess exposure to autoclaving heat may 

cause decreased structural integrity. 

1 unit = bag / 1000 1-4 units 5 -9 units 10 units 











Quali - MAXYMUM RECOVERY Filter-Tips with ultra-smooth surface, 

sterile in racks 

file:///F|/Kisker/Kisker/filter_d.htm (2 von 4) [08.12.2005 22:33:20]


With the emergence of PCR, HTS and DNA-Sequencing reliable 

sample preparation and delivery methods have become a critical 

issue. MAXYMUM RECOVERY Tips show much better results than 

standard tips, fluid retained by the MAXYMUM RECOVERY Tip is 5 - 

6 fold lower than any other tip tested. MAXYMUM RECOVERY Tips 

are produced through a modification of the original pp resin and do 

not include any silicons or additives. The Tips are certified to be free 

of DNase-, Rnase- and pyrogen 




*..cost reduction of 10-15% through getting an extra number of 

pipettings and saving of enzymes and other reagents. 

1 unit = 10x96 

Tips 

in racks 1-4 units 5-9 units 10 units 

Cat. # Volume compatibility Euro Euro Euro 








DNase-, RNase-, Pyrogen- and metall free, hydrophobe, additive free 

filtertips to eliminate aerosoles, conformity confirmed, graduated at 

10, 50 and 100µl for the 20, 50, 100 und 180µl tip 

1VE = 10 x96 

Tips 

1-4 units 5 -9 units 10 units 

Kat. # Volume compatibility Euro Euro Euro 

VL300S 0,1 - 10µl 

Gilson P2, P10, 

Biohit,Rainin EDP-2 

file:///F|/Kisker/Kisker/filter_d.htm (3 von 4) [08.12.2005 22:33:20] 

52,00 49,60 47,00


VL400S 0,5 - 10µl 

VL20S 0,5 - 20µl 

VL100S 1,0 - 100µl 

VL180S 1,0 - 200µl 

VL230S 1,0 - 230µl 

VL1000S 100 - 1000µl 


Eppend. 0,5-10µl, 

Socorex,Nichirio 

Eppend. Gilson, Bioh 

Brand,Socorex 


Brand,Socorex 


Brand,Socorex 


Brand,Socorex 


Brand,Socorex 

52,00 49,60 47,00 

52,00 49,60 47,00 

52,00 49,60 47,00 

52,00 49,60 47,00 

52,00 49,60 47,00 

54,00 51,60 49,00 

Our robotic filter tips are made to exact dimensions of OEM tips to ensure automation 

compatibility. The robotic filter tips are offered in different volume sizes for Beckman 

Biomek and Zymark robotors. They ensure an airtight seal to your robotic system for 

accurate dispensing and are as our other filter tips certified DNase-, RNase- and 

pyrogen free. The robotic filter tips are "low retention" tips, to make sure, that full 

amounts of samples like DNA or Proteins are captured for more reliable results. 

Cat. # Volume Compatibility packaging Euro 








file:///F|/Kisker/Kisker/filter_d.htm (4 von 4) [08.12.2005 22:33:20]



P.O. Box 1329 


Germany 


Quali - Tips, sterile Filterspitzen in Racks 

Diese hydrophoben Filterspitzen eliminieren 

Aerosole komplett. Die Produkte sind gammasterilisiert 

und werden zur Vermeidung von 

Kreuzkontaminationen eingesetzt. Steriles Arbeiten 

ist insbesondere wichtig bei allen PCR-Techniken , 

wo Kontamination mit Fremd-DNA über die Pipette 

zu falschen Ergebnissen führt. Aber auch bei 

anderen Anwendungen, wo eine Kontamination der 

Pipette mit biologischen, radioaktiven oder 

korrosiven Materialien vermieden werden soll, ist 

der Einsatz der Filtertips zu empfehlen. Die Spitzen 

sind zertifiziert DNase-, RNase- und Pyrogen frei! 

Die konisch zulaufende Spitzenform erhöht die 

Präzision. 

1 VE = 

10x96 Tips 


phone: +49 (0)2551-864310 

fax: +49 (0)2551-864312 


im Rack 1-4 VE 5-9 VE 10 VE 


A300S 

A300SLang 

A250S 

A400S 

A20S 

A50S 

A100S 

0,1 - 

10µl 

0,1 - 

10µl 

0,1 - 

2,5µl 

0,5 - 

10µl 

0,5 - 

20µl 

1,0 - 

50µl 

1,0 - 

100µl 

Gilson P2 P10 62,95 59,85 54,75 

Gils.P2,P10,Epp. 89,80 -- -- 

Epp.0,1-2,5µl,P2 89,80 -- -- 

Eppend.0,5-10µl 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

file:///F|/Kisker/Kisker/deutsch/filter_d.htm (1 von 4) [08.12.2005 22:33:21]


A150S 

A200S 

A350S 

A1000S 

1,0 - 

150µl 

1,0 - 

200µl 

1,0 - 

300µl 

100 - 

1000µl 

Universal 62,95 59,85 54,75 

Universal 62,95 59,85 54,75 

Finn,Capp 62,95 59,85 54,75 

Universal 

68,00 

(10x100) 

Quali - Tips, Filterspitzen Beutelware 

63,95 57,95 

Diese Filtertips haben gleiche Eigenschaften wie die sterilen Spitzen (siehe 

links), sind nicht gamma-sterilisiert aber unter Reinraumbedingungen 

produziert und abgefüllt sowie DNase-, RNase- und Pyrogenfrei. Sie können 

bei Bedarf vom Anwender wie folgt autoklaviert werden: bei 120°C unter 15 

PSI für 10-15 Minuten. 

1 VE = Beutel/1000 1-4 VE 5 -9 VE 10 VE 











Quali - MAXYMUM RECOVERY Tips mit ultraglatter Oberfläche, sterile 

Filterspitzen im Rack 



Maximale DNA Ausbeuten, minimale DNA Denaturierung - Höchste 

Genauigkeit und Präzision durch Oberflächenoptimierung - 

Kostenreduzierung von 10-15% durch Einsparung beim 

Enzymverbrauch 

1 VE = 10x96 

Tips 

im Rack 1-4 VE 5-9 VE 10 VE 








VALUE LINE, sterile Filterspitzen im Rack 

DNase-, RNase-, Pyrogen- und Metall frei, Hydrophobe, additivfreie 

Filterspitzen zur Aerosol – Eliminierung, konformitätsbescheinigt, 

Graduierung bei 10, 50 und 100µl für die 20, 50, 100 und 200µl 

Spitze 

1VE = 10 x96 

Tips 

1-4 VE 5 -9 VE 10 VE 


VL300S 0,1 - 10µl 

VL400S 0,5 - 10µl 

VL20S 0,5 - 20µl 

VL100S 1,0 - 100µl 

Gilson P2, P10, 

Biohit,Rainin EDP-2 

Eppend. 0,5-10µl, 

Socorex,Nichirio 


Brand,Socorex 


Brand,Socorex 

file:///F|/Kisker/Kisker/deutsch/filter_d.htm (3 von 4) [08.12.2005 22:33:21] 

52,00 49,60 47,00 

52,00 49,60 47,00 

52,00 49,60 47,00 

52,00 49,60 47,00


VL180S 1,0 - 200µl 

VL230S 1,0 - 230µl 

VL1000S 100 - 1000µl 


Brand,Socorex 


Brand,Socorex 


Brand,Socorex 

52,00 49,60 47,00 

52,00 49,60 47,00 

54,00 51,60 49,00 

Quali - Roboter Filterspitzen für Beckman Biomek und Multimek 

Passend für Laborautomaten garantieren sie absolute Kompatibilität. Die Filterspitzen 

passen luftdicht zu den jeweiligen Systemen für exakte Dispergierschritte, zertifiziert 

DNase-, RNase- und Pyrogen frei. Aufnahme und Abgabe der komplette Probenmenge 

Kat. # Volumen Passform Pack.einheit Euro 













Name: ________________________________________________________ 


Department ________________________________________________________ 

Street ________________________________________________________ 

City ________________________________________________________ 


Phone no ________________________________________________________ 

Fax no ________________________________________________________ 

e-mail ________________________________________________________ 





Cat. # Description Pack size quantity Euro 




City: _________________________ Postal code & State: _______________________

ÐÏà¡±á>þÿ 

HJþÿÿÿGÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 

ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ 



ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿì¥Áq` ø¿bjbjqPqP10::ÿÿÿÿÿÿ 

¤6666666J....:tJÂøººººº•••ACCCCCC$ºh"pg6•••••g66ººÛ|‰‰‰•v6º6ºA‰•A‰‰66‰º®/3„p£Ç.R‰”’0Â 

‰’]"’‰’6‰$••‰•••••gg 

•••Â••••JJJä 

.JJJ.JJJ666666ÿÿÿÿ 





Name: ________________________________________________________ 


Department ________________________________________________________ 

Street ________________________________________________________ 

City ________________________________________________________ 


Phone no ________________________________________________________ 

Fax no ________________________________________________________ 

e-mail ________________________________________________________ 





Cat. # Description Pack size quantity Euro 




City: _________________________ Postal code & State: _______________________ 

A‘ËÌ×ØÙçé‰ 

O@\}ŒŽ× 

òîåØÌ½Ø®½ÌŸØ‘ƒ‘Øwk_W_ŸI‘Ah‚7×mH sH h‚7×CJOJQJmH sH 

h‚7×mHsHh‚7×OJQJmHsHh‚7×OJQJmHsHh‚7×OJQJmH sH h‚7×CJOJQJmHsHh‚7×CJOJQJmH sH 

h‚7×5CJOJQJmH sH h‚7×5CJOJQJmH sH h‚7×5CJ OJQJmH sH h‚7×OJQJmH sH 

h‚7×5OJQJmH sH h‚7×5OJQJh‚7×jh‚7×5OJQJUA‘ØÙé* u º ü < 

‰ 

Ì 

Ošðñ@\dq|ïïííííííèèèèèèèèèèèèèèíâââ$Ifdh„¯%„±„4&#$+DX/„Ž0$ý|†ŒŽ‘’ùùzùùùùùkd'$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaö$If’“”•–—˜€zzzzz$Ifkdó$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaö˜š›œž€zzzzz$Ifkd¿$$If”‹ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaöžŸ ¡¢£¤€zzzzz$Ifkd‹$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaö¤¥¦§¨©ª€zzzzz$IfkdW$$If”‹ÖrÉZ#""†%É‘

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaöª«¬®¯°€zzzzz$Ifkd#$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaö°±²³´µ€zzzzz$Ifkdï$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaö·¸¹º»¼€zzzzz$Ifkd»$$If”‹ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaö¼½¾¿ÀÁÂ€zzzzz$Ifkd‡$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaöÂÃÄÅÆÇÈ€zzzzz$IfkdS$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaöÈÉÊËÌÍÎ€zzzzz$Ifkd$$If”‹ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaöÎÏÐÑÒÓÔ€zzzzz$Ifkdë$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÿÿÿÿÿÖÿÿÿÿaöÔÕÖ× 

f 

g 

´ 

µ 

€~~~~~~~~~~kd·$$If”|ÖrÉZ#""†%É‘ 

ÉÿdöööÖÖÖÖÿÿÿÿaö/0P°. °ÅA!°n"°5#8$8%°°Ð°ÐÐ'Ddd=Ü“[iðX² 

ð 

cð4AÁ¿ÿlogo100ð€bð{¤¼Æ«cd¤–Œ{Æ¯‡}ÿWDInðO¤¼Æ«cd¤–Œ{Æ¯‡}ÿ‰PNG 

IHDRd=Ô[*8$:õÑß:÷Îé3—×•[¸‚ä‘o^2}ÚœÑz£Ë@ºÚ,BHceíò]}ÂÍP±É¦Û—eM›=:"ÚD3 

´Gð4VÚ¦@%(9[½âO›ÊmˆBÙ/e@k£»¹ÚÕ:Ð 

ÕeõËïØTUØ„e@È)>ÞðòŸ·a*z 

°qéÊ9“gŽÒ:+3‚">ïíWvþ¦Æf 

YöêB•ZØ(9[ 

ñCŸàò~ÿq~ãÅVh'T±C¾9¹ño{%/Ñ¸Ef·“Ò61ÙÇ.¸/«ý!@à;eÎð{Ÿš«Tøîªo>]}°¥> dÉ2>´÷ÄîŽõ”Ÿ: 

¥F,[uóÔYcºÜÿå© 

+¾ºöÞggk´|û`:VŒGð€àòV—×'§Æó~Úé’—˜£•9P

«¿ØœŸ[j 

g0¥(!@x¤ù¥ï0Pûž¬*«U";eÝU6Þ—Ÿ»ï”ÿ·±®ÚÍB§Þý1¹ŸºxEÔ 

\Š”Ñq¼†Eu2ðfÜ4öóMŠŽÖ;,ž›>ñúàv»F`âu#¾~ç¸Ç%®}üëÏÖàTt}¹’Ò¢T*…(h*BhpÊÀ¬[GòÚæç#óV¿µ÷éˆ(“ÒÒ 

—›Ž~ýîQBˆB0s¨êÑÖmùß=Öf{Ðƒ–ÿG=%- 

$ÙAË1KŸ¼sÊœÔ^vˆ`bkqoX±û¹Å›röžêo|õúkî¤G4M?¸rÞÅÒæÒüYêÕ ‡˜ûUQþþÊøá»?=;ml’)BÏqlÿ ¤C·Yˆ‚‡_¿A 

£Õt½ŸE©nxáž÷ŽÿÐgvZkR%ŒpÝ°Œ‰)‰Ãc"cÂûªæÞàØþóL_Š¤!B½»úŸ*µ*øeÊ’ÚÜû~A^µOr? 

¢g`XŠS³¼61jÆœ IQ†0Á¬Uñ§bX–¡Úo†¢}AºM¢x¯XÆ2Æ’O&„Èöz|XÆÀãò nÇåóâ¡oNm{3'”ž§MŠ/ 

çYèæN©µÙîùŸ¯ÍQ¾Ù· Y¤3©Mº°HCDœ>*Á4 Öl4ëÕ–×r¬Š¥Y¤RqÃ@ÀÝNJ!J} ‹XÁçóý_7çU…á9çÌ 

°Y\X@#Á„„;C¡ÆÆÂ„Â†ÆJc¡‰6be%&[‰ñ•Øˆ T 

C@0AV^òveï½sw—‡šHxKü»{«ÉäÞùÏùþñeÞ(ëºžR²sŽã8é 

Ç“žÌ©ì¬§òš1»8ïå]ßQ¾T¾§Z×ŸxæRýÙÚ®ôüöîæ«oR½S[ìW¯!€€€€AþØÝ1+þÅš%Ø(ÀírºÓZØÊàÝÒ¸µ±ß||¾áì 

6Ú 

œ

5ÖÉ5Öÿ5Öd#vÉ#v‘ 

#vÉ#vÿ#vd:V”|öö5ÖÉ5Ö‘ 

5ÖÉ5Öÿ5Öd/Ö/Ö/Ö4ÖaöÊ$$If!vh5ÖÉ5Ö‘ 


#vÉ#vÿ#vd:V”‹öö5ÖÉ5Ö‘ 

5ÖÉ5Öÿ5Öd/Ö/Ö/Ö4ÖaöÊ$$If!vh5ÖÉ5Ö‘ 



5ÖÉ5Öÿ5Öd/Ö/Ö/Ö4ÖaöØ$$If!vh5ÖÉ5Ö‘ 



5ÖÉ5Öÿ5Öd/Ö/Ö/Ö/Ö4Öaö†œ

G.Kisker GbR 



Fenster schließen

G.Kisker GbR 


Fenster schließen

Fenster schließen

DISCOVERY SCIENTIFIC Biotechnology - About us

Create successful ePaper yourself

Delete template?

Save as template?