Hand-held polisher HPM 125

www.frueh-maschinen.de
Hand-held polisher
HPM 125
� A segment of the brush ring
can be removed for an up-to-theedge
finish.
Technical data
Motor universal motor
Power 1400 w
Voltage 230V/50 ac current
Speed 2000 - 6800 min-1, infinitely variable
Weight 2.8 kg
Protection class II insulated
Ø tool 125 mm
� (07181 ) 929732
The HPM 125 is an easy to handle,
lightweight polisher for dry polishing
concrete, screed and mineral surfaces
(filler).
It is especially suitable for small surfaces,
difficult to access areas and
edge work. The machine is equipped
with a dust extraction hood fitted
with a brush ring which is adjustable
in height and a removable segment
for an up-to-the-edge finish.
It is supplied in a practical systainer.
� Machine with base plate and
operating tools. Complete set
supplied in a transport systainer.

Tools and accessories HPM 125
The aluminium base plate with a Velcro pad is suitable for use
with all Velcro-backed grinding discs Ø 125 mm and is simply
screwed onto the shaft. The Velcro pad is available as a replacement
spare part.
Grinding discs Ø 125 mm
Resin and metal bonded diamond
grinding discs Ø 125 mm with
a Velcro backing for dry polishing
on even surfaces such as concrete,
screed etc.
Available in various grit sizes -
mesh 50 to 3000.
The Velcro backing on each disc
is coloured according to the grit
size.
The Diamond cup wheel Ø125 mm is ideally suited to coarse and
intermediate sanding. The cup wheel is secured with retaining
washers - the pin wrench required is included in the scope of
supply.
Erwin Früh GmbH
Machines and accessories for professional floor treatment and sub-floor preparation
Vorstadtstrasse 61 - 67, D-73614 Schorndorf info@frueh-maschinen.de
Fon +49 7181 92 97 32, Fax +49 7181 92 97 33 www.frueh-maschinen.de
Subject to technical alterations. Printed in Germany