GB - Steirer Parkett

62 | technical data
3-layer parquet,
tongue & groove
In this traditional installation system the
flooring elements are glued in tongue
and groove on all sides. For glue-down
installation, adhesive is applied to the
end groove joints and a little way down
the sides of each board (forming an “H”
pattern).
Surface finish: SEDa or TEnSEO
approx. 3.6 mm wear layer from selected
solid wood
core layer of quarter-sawn European
softwood with small gap
between elements
Plywood inserts at both ends
(water-resistant)
2 mm spruce bottom veneer sanded
dimensions 14 x 182 x 2200 mm
installation floating or glue-down
Packaging 6 pieces/pack = 2.402 m 2 , 42 packs/pallet = 100.884 m 2
1-strip cottage plank & 3-strip boat deck flooring
Suitable for underfloor heating. rt=0.101 m 2 K/W