Infrared-Moxa-Device M3 - Silberbauer

The new Reflector Technique in the M3:
The Infrared Source in the M3 is a halogen bulb driven at lowered voltage which
gives a high intensity infrared percentage. It is adjusted in the focus of a special
gold-plated reflector in the shape of a rotational ellipsoid. At the other focal point,
a quartz glass light conductor is placed and guides the concentrated Infrared Beam.
The device is powered by a Medical Standard Wall Adapter.
UV Filter Technology: the quartz glass of the lamp is enriched with UV absorbing
substances and dramatically reduces the high-energy parts of the spectrum (UV-C
and UV-B radiation). Moreover, by using a low voltage, the UV generated inside the
bulb is nearly zero. This gives double safety for the user.
Application of the Moxa Device M3 is very easy:
With two knobs the timer (2 sec. to continuous) and the power (3 steps) can be
adjusted; then press the button and the treatment of the point starts:
Low Power: Place the tip directly at the skin
Medium Power: operate with constant distance to skin (approx. 1 – 2 cm / 0.4 to
0.8 inch)
High Power: vary distance to skin periodically (birds pecking technique)
After reaching the desired temperature or after expiry of the treatment time, release
the button and the infrared beam switches off.
Technical Datas
Life time of the lamp Approx. 10,000 hours
Mains voltage 100 to 240 volts
Mains power Approx. 8 watts
Warranty 36 months
Dimensions (diameter x length) 20 mm x 190 mm
Weight Approx. 64 g
Delivery
1 ea. Infrared Moxa Device M3 1 ea. Medical Grade Power Supply
1 ea. Cabin 1 ea. Instruction Manual
Issue: Dec. 26, 2010
Technical Data is subject to change.
0120