Sternal Talon - Sternal Closure System

More documents

Recommendations

Info

Removal and Emergency Re-entry � Removal of the <strong>Sternal</strong> <strong>Talon</strong> ® is accomplished by rotating the screw clockwise to the 7 o'clock “Open” position. � This will unlock the device and allow the two sides to be separated and removed. Schelbert/ Bödeker | January 2010
Removal and Emergency Re-entry � A second re-entry method can be accomplished by cutting the device at the cut points. � A third re-entry method is to insert a flat screwdriver in the lock mechanism and rotate superiorly to disengage teeth. Schelbert/ Bödeker | January 2010 cut point cut point
Page 1 and 2: Sternal Talon ® - Sternal Closure
Page 3 and 4: Sternal Talon ® System Components
Page 5 and 6: Single Sternal Talon ® The Single
Page 7 and 8: Sternal Talon � Set � Each Ster
Page 9 and 10: Measuring of the Sternum Measure st
Page 11 and 12: Preparing Site for Insertion of Ste
Page 13 and 14: Placing and aligning the Sternal Ta
Page 15 and 16: Closing the Sternal Talon ® � Al
Page 17: Sternal Talon ® Placement � Usua
Page 21 and 22: Instruments 24-008-01 Screwdriver S
Page 23 and 24: Emergency Release � In order to e
Page 25 and 26: Advantages Sternal Talon ® � Adv

Sternal Talon - Sternal Closure System

Create successful ePaper yourself

Delete template?

Save as template?