Mai - ASRO

STANDARDIZAREA NAŢIONALĂ
STANDARDE APROBATE
Standardele române de mai jos au fost aprobate în luna aprilie 2005. Standardele europene şi internaţionale
sunt adoptate ca standarde române prin metoda versiunii române (T), metoda filei de confirmare (FC) sau
metoda notei de confirmare (A). Standardele române originale sunt notate cu E. Sub indicativul standardului
este indicat numărul comitetului tehnic (CT) responsabil. Pentru standardele adoptate prin file de confirmare
sau note de confirmare textul standardului nu este publicat în România nici în traducere nici în versiunea
oficială. Textele în original ale acestor standarde pot fi consultate sau procurate de la Asociaţia de
Standardizare din România.
În această rubrică sunt cuprinse, de asemenea, amendamente şi erate ale standardelor române.
În cazul în care un standard aprobat înlocuieşte şi anulează unul sau mai multe standarde existente,
indicativul/indicativele acestora sunt indicate după titlul standardului respectiv.
Informaţii privind standardele anulate sunt date în rubrica STANDARDE ROMÂNE ANULATE.
27 ENERGETICĂ ŞI TRANSMISIA CĂLDURII
27.120 Energie nucleară
27.120.30 Materiale de fisiune
SR ISO 7097-1:2005
T
CT 331
Tehnologia combustibilului nuclear. Dozarea uraniului în
soluţii, hexafluorură de uraniu şi solide. Partea 1: Metoda
titrimetrică prin reducere cu fier(II) şi oxidare cu dicromat de
potasiu
Inlocuieste: SR ISO 7097:1995
SR ISO 7097-2:2005
T
CT 331
Tehnologia combustibilului nuclear. Dozarea uraniului în
soluţii, hexafluorură de uraniu şi solide. Partea 2: Metoda
titrimetrică prin reducere cu fier(II) şi oxidare cu ceriu(IV)
Inlocuieste: SR ISO 7097:1995
SR ISO 12795:2005
T
CT 331
Tehnologia combustibilului nuclear. Pulberi şi pastile de dioxid
de uraniu. Determinarea concentraţiei uraniului şi a raportului
oxigen/uraniu folosind metoda gravimetrică cu corecţie pentru
impurităţi
77 METALURGIE
77.140 Produse din oţel şi fontă
77.140.20 Oţeluri inoxidabile
SR EN 10088-3:1998/C92:2005 E
CT 42
Oţeluri inoxidabile. Partea 3: Condiţii tehnice de livrare pentru
semifabricate, bare, sârme semifabricat şi profile pentru
utlizări generale
77.140.50 Produse şi semi-produse plate din oţel
SR EN 10087:2002/C91:2005 E
CT 42
Oţeluri pentru automate. Condiţii tehnice de livrare pentru
semifabricate, bare şi sârme laminate la cald
SR EN 10088-3:1998/C92:2005 E
CT 42
Oţeluri inoxidabile. Partea 3: Condiţii tehnice de livrare pentru
semifabricate, bare, sârme semifabricat şi profile pentru
utlizări generale
77.140.60 Bare din oţel şi oţel rotund
SR EN 10087:2002/C91:2005 E
CT 42
Oţeluri pentru automate. Condiţii tehnice de livrare pentru
semifabricate, bare şi sârme laminate la cald
77.140.65 Sârme, cabluri şi lanţuri din oţel
SR EN 10087:2002/C91:2005 E
CT 42
Oţeluri pentru automate. Condiţii tehnice de livrare pentru
semifabricate, bare şi sârme laminate la cald

Buletinul Standardizării – Mai 2005
2
STANDARDE ANULATE
Standardele române de mai jos au fost anulate în luna aprilie 2005, fie prin înlocuire, fie printr-o decizie de
anulare.
Pentru standardele anulate prin înlocuire sunt precizate şi standardele înlocuitoare.
13 MEDIU. PROTECŢIA SĂNĂTĂŢII. SECURITATE
13.040 Calitatea aerului
13.040.30 Aerul la locul de muncă
SR EN 100015-3:2002
Specificaţie de bază: Protecţia dispozitivelor sensibile la
descărcări electrostatice. Partea 3: Reguli pentru camere
curate
27 ENERGETICĂ ŞI TRANSMISIA CĂLDURII
27.120 Energie nucleară
27.120.30 Materiale de fisiune
SR ISO 7097:1995
Dozarea uraniului în soluţii de combustibili pentru reactoare şi
în soluţii de produse pe bază de uraniu. Metoda titrimetrică
prin reducerea cu sulfat de fier (II) şi oxidare cu dicromat de
potasiu
Inlocuit prin: SR ISO 7097-1:2005
SR ISO 7097-2:2005
29 ELECTROTEHNICĂ
29.020 Electrotehnică în general
SR EN 55020+A11:1999/A14:2001
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003
29.140 Lămpi şi accesorii
29.140.40 Corpuri de iluminat
SR EN 60598-2-5+A2:1995
Corpuri de iluminat. Partea 2: Condiţii speciale. Secţiunea 5:
Proiectoare
Inlocuit prin: SR EN 60598-2-5:2001
31 ELECTRONICĂ
31.020 Componente electronice în general
SR EN 100015-1:2002
Specificaţie de bază: Protecţia dispozitivelor sensibile la
descărcări electrostatice. Partea 1: Reguli generale
SR EN 100015-2:2002
Specificaţie de bază: Protecţia dispozitivelor sensibile la
descărcări electrostatice. Partea 2: Reguli pentru condiţii de
umiditate scăzută
SR EN 100015-3:2002
Specificaţie de bază: Protecţia dispozitivelor sensibile la
descărcări electrostatice. Partea 3: Reguli pentru camere
curate
SR EN 100015-4:2002
Specificaţie de bază: Protecţia dispozitivelor sensibile la
descărcări electrostatice. Partea 4: Reguli pentru condiţii la
înaltă tensiune
33 TELECOMUNICAŢII. TEHNICI AUDIO ŞI VIDEO
33.100 Compatibilitate electromagnetică (EMC)
33.100.01 Compatibilitate electromagnetică în general
SR EN 55020+A11:1999
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003
SR EN 55020+A11:1999/A12:2001
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003
SR EN 55020+A11:1999/A13:2001
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003
33.160 Tehnici audio, video şi audiovizuale
33.160.20 Receptoare radio
SR EN 55020+A11:1999/A12:2001
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003
SR EN 55020+A11:1999/A13:2001
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003
SR EN 55020+A11:1999/A14:2001
Imunitatea electromagnetică a receptoarelor de radiodifuziune
şi a echipamentelor asociate
Inlocuit prin: SR EN 55020:2003

Buletinul Standardizării – Mai 2005
STANDARDE EUROPENE ADOPTATE INIŢIAL PRIN FILĂ DE CONFIRMARE SAU NOTĂ DE
CONFIRMARE PENTRU CARE SE PUBLICĂ VERSIUNEA ROMÂNĂ
În această rubrică sunt înscrise standardele române adoptate iniţial prin filă de confirmare sau notă de
confirmare şi pentru care se publică varianta română.
Data de aprobare menţionată sub titlul standardului este data la care a fost adoptat standardul european prin
filă de confirmare sau notă de confirmare.
Versiunea română publicată înlocuieşte fila de confirmare sau nota de confirmare a adoptării standardului
respectiv, publicată anterior.
03 SOCIOLOGIE. SERVICII. ORGANIZAREA ŞI
MANAGEMENTUL ÎNTREPRINDERII.
ADMINISTRARE. TRANSPORT
03.120 Calitate
03.120.10 Managementul calităţii şi asigurarea calităţii
SR EN ISO 10012:2004
Sisteme de management al măsurării. Cerinţe pentru procese
şi echipamente de măsurare
Data aprobarii: 23/09/2004
Data traducerii: 25/04/2005
13 MEDIU. PROTECŢIA SĂNĂTĂŢII. SECURITATE
13.060 Calitatea apei
13.060.30 Ape uzate
SR EN 588-2:2002
Tuburi de fibro-ciment pentru racorduri şi reţele de canalizare.
Partea 2: Cămine de vizitare şi cămine de inspecţie
Data aprobarii: 23/09/2002
Data traducerii: 29/04/2005
17 METROLOGIE ŞI MĂSURARE. FENOMENE FIZICE
17.020 Metrologie şi măsurări în general
SR EN ISO 10012:2004
Sisteme de management al măsurării. Cerinţe pentru procese
şi echipamente de măsurare
Data aprobarii: 23/09/2004
Data traducerii: 25/04/2005
23 SISTEME PENTRU FLUIDE ŞI COMPONENTE DE UZ
GENERAL
23.060 Robinetărie
23.060.99 Alte tipuri de robinete
SR EN 12380:2003
Supape de echilibrare a presiunii pentru sisteme interioare de
canalizare. Cerinţe, metode de încercare şi evaluarea
conformităţii
Data aprobarii: 15/12/2003
Data traducerii: 29/04/2005
59 INDUSTRIA TEXTILĂ ŞI INDUSTRIA PIELĂRIEI
59.080 Produse din industria textilă
59.080.70 Geotextile
SR EN 13251:2001
Geotextile şi produse înrudite. Caracteristici impuse pentru
utilizarea în lucrările de terasamente, fundaţii şi structuri de
susţinere
Data aprobarii: 26/07/2001
Data traducerii: 20/04/2005
SR EN 13252:2001
Geotextile şi produse înrudite. Caracteristici impuse pentru a fi
utilizate în sistemele de drenaj
Data aprobarii: 26/07/2001
Data traducerii: 20/04/2005
SR EN 13253:2001
Geotextile şi produse înrudite. Caracteristici impuse pentru
utilizarea la lucrările de control a eroziunii (protecţii costiere,
apărări de maluri)
Data aprobarii: 26/07/2001
Data traducerii: 20/04/2005
SR EN 13254:2001
Geotextile şi produse înrudite. Caracteristici impuse pentru
utilizarea în construcţii de rezervoare şi baraje
Data aprobarii: 26/07/2001
Data traducerii: 20/04/2005
91 CONSTRUCŢII ŞI MATERIALE DE CONSTRUCŢII
91.140 Instalaţii în clădiri
91.140.80 Sisteme de evacuare a apei
SR EN 12380:2003
Supape de echilibrare a presiunii pentru sisteme interioare de
canalizare. Cerinţe, metode de încercare şi evaluarea
conformităţii
Data aprobarii: 15/12/2003
Data traducerii: 29/04/2005
SR EN 13564-1:2003
Clapete împotriva refulării pentru clădiri. Partea 1: Cerinţe
Data aprobarii: 18/03/2003
Data traducerii: 29/04/2005
93 CONSTRUCŢII CIVILE
93.030 Sisteme de canalizare externe
SR EN 588-2:2002
Tuburi de fibro-ciment pentru racorduri şi reţele de canalizare.
Partea 2: Cămine de vizitare şi cămine de inspecţie
Data aprobarii: 23/09/2002
Data traducerii: 29/04/2005
97 ECHIPAMENT PENTRU UZ CASNIC ŞI COMERCIAL.
ECHIPAMENT PENTRU DISTRACŢII. ECHIPAMENT
PENTRU SPORT
97.145 Scări
SR EN 13101:2003
Trepte pentru cămine de vizitare. Cerinţe, marcare, încercări
şi evaluarea conformităţii
Data aprobarii: 18/03/2003
Data traducerii: 29/04/2005
3

Buletinul Standardizării – Mai 2005
4
MODIFICĂRI ÎN ORGANIZAREA ŞI STRUCTURA COMITETELOR TEHNICE
În această rubrică sunt publicate informaţii privind activitatea comitetelor tehnice naţionale de standardizare
care au suferit modificări în organizare sau structură în luna aprilie 2005.
CT 17 Dispozitive cu semiconductoare
Secretariat: IMT - Institutul Naţional de Cercetare - Dezvoltare pentru Microtehnologie
Secretar: Cătălin Constantin TIBEICĂ
Expert ASRO: Ing. Gabriel VASILIU
CT 22 Echipamente electromedicale
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Teodor STĂTESCU
Expert ASRO: Ing. Teodor STĂTESCU
CT 26 Electroacustică şi ultrasunete
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Gabriel VASILIU
Expert ASRO: Ing. Gabriel VASILIU
CT 37 Condensatoare de putere
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Tatiana SCĂRLĂTESCU
Expert ASRO: Ing. Tatiana SCĂRLĂTESCU
CT 56 Managementul calităţii şi asigurarea calităţii
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Diana IORGA
Expert ASRO: Ing. Diana IORGA
CT 89 Robinetărie industrială
Secretariat: CRIA - Comitetul Român pentru Industria de Armături
Secretar: Ing. Tudoriţa IONIŢĂ
Expert ASRO: Ing. Iulian FLOAREA
CT 94 Produse agroalimentare
Secretariat: ICA - SC Institutul de Cercetări Alimentare SA
Secretar: Eugenia SPULBER
Expert ASRO: Fiz. Mioara VISTIG
CT 95 Metode orizontale de analiză a produselor agroalimentare
Secretariat: ICA - SC Institutul de Cercetări Alimentare SA
Secretar: Marta ZACHIA
Expert ASRO: Fiz. Mioara VISTIG
CT 114 Plăci şi obiecte sanitare ceramice
Secretariat: PROCEMA CERCETARE - Institutul de Cercetare, Dezvoltare, Analize Tehnice pentru Materiale de Construcţii
Presedinte: Rusan REZEANU - LASSELBERGER
Expert ASRO: Ing. Ecaterina ARAMĂ
CT 135 Condensatoare şi rezistoare pentru echipamente electronice
Secretariat: ASRO - Asociatia de Standardizare din România
Secretar: Ing. Florin NEACŞU
Expert ASRO: Ing. Florin NEACŞU
CT 137 Aparate electrice pentru atmosferă explozivă
Secretariat: INSEMEX - Institutul National pentru Securitate Minieră şi Protecţie Antiexplozivă
Secretar: Ing. Adriana ANDRIŞ
Expert ASRO: Ing. Tatiana SCĂRLĂTESCU

CT 143 Echipamente şi sisteme de navigaţie
Secretariat: ICEPRONAV - Institutul de Cercetări şi Proiectări pentru Construcţii Navale
Presedinte: Ing. Dumitru NEGOIŢĂ - ICEPRONAV
Secretar: Ing. Ecaterina HINEA
Expert ASRO: Ing. Doina DRAGOMIR
CT 144 Fiabilitate şi mentenabilitate
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Florin NEACŞU
Expert ASRO: Ing. Florin NEACŞU
CT 181 Tutun şi produse din tutun
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Fiz. Mioara VISTIG
Expert ASRO: Fiz. Mioara VISTIG
CT 186 Alimentări cu apă şi canalizări
Secretariat: PROED - Institutul de Studii şi Proiectare pentru Lucrări Tehnico Edilitare
Secretar: Ing. Aura ALPOPII
Expert ASRO: Ing. Mihaela UDRAN
CT 189 Articole tehnice de cauciuc
Secretariat: ASRO - Asociaţia de Standardizare din România
Presedinte: Ing. Antonel-Viorel PLEŞA - ICME ECAB
Expert ASRO: Ing. Doina PÂRVAN
Buletinul Standardizării – Mai 2005
CT 196 Regăsirea informaţiei, transfer şi gestiunea informaţiei pentru interconexiunea sistemelor deschise (OSI)
Secretariat: ICI - Institutul de Cercetări pentru Informatică
Presedinte: Mat. Gheorghe ŞERBAN - ANISP
Expert ASRO: Ing. Florin NEACŞU
CT 206 Grafică pe calculator
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Florin NEACŞU
Expert ASRO: Ing. Florin NEACŞU
CT 208 Tehnici de securitate în informatică
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Teodor STĂTESCU
Expert ASRO: Ing. Teodor STĂTESCU
CT 210 Seturi de caractere şi codificări
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Teodor STĂTESCU
Expert ASRO: Ing. Teodor STĂTESCU
CT 223 Securitatea echipamentelor tehnice
Secretariat: INCDPM - Institutul Naţional de Cercetare -Dezvoltare pentru Protecţia Muncii
Secretar: Ing. Dumitru AMĂRIUŢEI
Expert ASRO: Ing. Mareana CERNAT
CT 237 Produse din materiale plastice
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Doina PÂRVAN
Expert ASRO: Ing. Doina PÂRVAN
CT 283 Cafea, ceai, condimente şi alţi stimulenţi
Secretariat: PLAFAR - PLAFAR
Secretar: Ana PAPASTOIANU
Expert ASRO: Fiz. Mioara VISTIG
CT 298 Agenţi activi de suprafaţă, produse cosmetice şi de igienizare
Secretariat: ASRO - Asociaţia de Standardizare din România
Presedinte: Cerc.princ gr.I Mihaela GRECU - ICECHIM
Expert ASRO: Ing. Doina PÂRVAN
5

Buletinul Standardizării – Mai 2005
6
CT 328 Echipamente de birou
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Teodor STĂTESCU
Expert ASRO: Ing. Teodor STĂTESCU
CT 341 Simboluri grafice
Secretariat: TRANSLOGISTIC - SC TRANSLOGISTIC SRL Consult. Studii, Tehnologii, Asigurarea Calităţii Produselor şi Serviciilor
Secretar: Ing. Luigino SZECSY
Expert ASRO: Ing. Irina MARCU
CT 356 Agricultură biologică
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Fiz. Mioara VISTIG
Expert ASRO: Fiz. Mioara VISTIG
CT 360 Caracterizarea deşeurilor şi a nămolurilor
Secretariat: ICIM - Institutul Naţional de Cercetare-Dezvoltare pentru Protecţia Mediului
Secretar: Ing. Luminiţa ATUDOREI
Expert ASRO: Ing. Diana IORGA
CT 366 Proiectare asistată de calculator
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Florin NEACŞU
Expert ASRO: Ing. Florin NEACŞU
CT 367 Bere şi materii prime folosite la fabricarea berii
Secretariat: PSIPBR - Patronatul Societăţilor Independente Producătoare de Bere din România
Secretar: Gabriel NICOLAU
Expert ASRO: Fiz. Mioara VISTIG
CT 371 Sisteme de automatizare industrială şi structuri de integrare
Secretariat: ASRO - Asociaţia de Standardizare din România
Secretar: Ing. Florin NEACŞU
Expert ASRO: Ing. Florin NEACŞU
� Activitatea de standardizare naţională se desfăşoară în comitete tehnice, organe fără personalitate juridică ale
organismului naţional de standardizare. Structura şi modul de lucru ale comitetelor tehnice sunt prevăzute în
standardul SR 10000-3.
� Activitatea comitetelor tehnice se desfăşoară atât pe plan naţional cât şi european şi internaţional.
� Membrii comitetelor tehnice sunt specialişti desemnaţi nominal de factorii interesaţi (agenţi economici, institute de
cercetare, de învăţământ, asociaţii profesionale, organisme guvernamentale etc.) şi împuterniciţi de aceştia.
Componenţa comitetelor tehnice trebuie să asigure reprezentarea echilibrată a factorilor interesaţi: producători,
utilizatori, consumatori, autorităţi etc. Pentru a deveni membru al unui comitet tehnic trebuie să se transmită o
solicitare scrisă (e-mail sau fax) expertului ASRO responsabil pentru comitetul respectiv. Adresele de e-mail ale
experţilor ASRO, pentru fiecare comitet tehnic în parte pot fi găsite la adresa www.asro.ro
� Prin participarea la activitatea comitetelor tehnice, specialiştii factorilor interesaţi au posibilitatea să-şi aducă
contribuţia la standardizarea naţională, europeană sau internaţională, să cunoască cu 2-3 ani în avans informaţiile
propuse pentru a fi incluse în standarde, putând astfel lua măsurile care se impun. Totodată, participarea activă la
lucrările comitetelor tehnice reprezintă o deosebită oportunitate pentru a realiza şi întreţine contacte cu specialiştii
din domeniul său de activitate din ţară şi străinătate.
� Informaţii privind participarea la activitatea de standardizare în cadrul comitetelor tehnice se pot primi de la experţii
direcţiei de standardizare ASRO (a se vedea www.asro.ro).

STANDARDIZAREA EUROPEANĂ
Buletinul Standardizării – Mai 2005
Informaţiile din această secţiune se referă la activitatea Organizaţiilor Europene de Standardizare CEN,
CENELEC şi ETSI.
În vederea unei mai mari operativităţi, titlurile standardelor şi proiectelor de standarde europene se publică în
versiunea originală (engleză).
Pentru înţelegerea simbolurilor utilizate în această secţiune se fac precizările de mai jos:
EN Standard European
HD Document de armonizare
ENV Prestandard European
CR Raport CEN
CWA Acordul Grupei de Lucru
ETSI EG Ghid ETSI
ETSI EN Standard european pentru telecomunicaţii
ETSI ES Standard ETSI
ETSI TS Specificaţie tehnică ETSI
ETSI TR Raport tehnic ETSI
ETSI SR Raport special ETSI
doa Termenul limită de anunţare a standardului european la nivel naţional
dop Termenul limită de publicare a standardului la nivel naţional
dow Termenul limită de retragere a standardelor naţionale conflictuale
prEN Proiect de Standard European
prHD Proiect de Document de armonizare
prENV Proiect de Prestandard European
dea Termen limită de răspuns pentru observaţii şi/sau vot formal .
eOP Procedură simplificată de adoptare (ETSI)
ePE Termen limită de răspuns pentru sfârşitul anchetei publice a unui standard ETSI
Ad Dată de adoptare
Sectoarele CEN şi CENELEC sunt:
A Servicii
B Clădiri şi construcţii
C Produse chimice, industrie chimică şi produse alimentare
F Standarde fundamentale
H Produse electrocasnice şi pentru distracţie
I Inginerie mecanică
M Materiale metalice
N Materiale nemetalice
S Sănătate, mediu şi echipamente medicale
T Transport, manipulare mecanică şi ambalaje
U Inginerie electronică
W Inginerie electrică
Z Diverse
B02 STRUCTURI
EN 13084-8:2005
Free-standing industrial chimneys - Part 8: Design
and execution of mast construction with satellite
components
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14679:2005
Execution of special geotechnical works - Deep
mixing
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.13
STANDARDE EUROPENE CEN APROBATE
În perioada de la 2005-04-01 până la 2005-04-30
EN 1991-1-4:2005
Eurocode 1: Actions on structures - Part 1-4: General
actions - Wind actions
doa: 2005.07.31 dop: 2005.10.31 dow: 2010.03.31
EN 1993-1-2:2005
Eurocode 3: Design of steel structures - Part 1-2:
General rules - Structural fire design
doa: 2005.07.31 dop: 2005.10.31 dow: 2010.03.31
7

Buletinul Standardizării – Mai 2005
B08 UŞI ŞI FERESTRE
EN 14759:2005
Shutters - Acoustic insulation relative to airborne
sound - Expression of performance
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
B09 PROTECŢIE TERMICĂ
EN 13363-2:2005
Solar protection devices combined with glazing -
Calculation of total solar energy transmittance and
light transmittance - Part 2: Detailed calculation
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
B12 ZIDĂRII
EN 1052-5:2005
Methods of test for masonry - Part 5: Determination
of bond strength by the bond wrench method
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14580:2005
Natural stone test methods - Determination of static
elastic modulus
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
B15 ECHIPAMENTE SANITARE
EN 14528:2005
Bidets - Functional requirements and test methods
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
B18 SCHELE
EN 14653-1:2005
Manually operated hydraulic shoring systems for
groundwork support - Part 1: Product specifications
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14653-2:2005
Manually operated hydraulic shoring systems for
groundwork support - Part 2: Assessment by
calculation or test
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
B26 CONSTRUCŢIA ŞI ÎNTREŢINEREA
DRUMURILOR
EN 12697-25:2005
Bituminous mixtures - Test methods for hot mix
asphalt - Part 25: Cyclic compression test
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
B27 MATERIALE HIDROIZOLANTE
EN 1304:2005
Clay roofing tiles and fittings - Product definitions
and specifications
doa: 2005.07.31 dop: 2005.10.31 dow: 2007.01.31
B32 PRODUSE PREFABRICATE DE BETON
EN 14649:2005
Precast concrete products - Test method for strength
retention of glass fibres in cement and concrete
(SIC TEST)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
8
C01 PRODUSE ALIMENTARE
EN 14546:2005
Foodstuffs - Determination of trace elements -
Determination of total arsenic by hydride generation
atomic absorption spectrometry (HGAAS) after dry
ashing
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14627:2005
Foodstuffs - Determination of trace elements -
Determination of total arsenic and selenium by
hydride generation atomic absorption spectrometry
(HGAAS) after pressure digestion
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 7088:2005
Fish-meal - Vocabulary (ISO 7088:1981)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
C02 VOPSELE ŞI PRODUSE CONEXE
EN ISO 9514:2005
Paints and varnishes - Determination of the pot life
of multicomponent coating systems - Preparation and
conditioning of samples and guidelines for testing
(ISO 9514:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
C04 STICLĂRIE DE LABORATOR
EN ISO 385:2005
Laboratory glassware - Burettes (ISO 385:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
F05 MIJLOACE DE MĂSURĂ
CWA 15261-1:2005
Measurement uncertainties in mechanical tests on
metallic materials - Part 1: The evaluation of
uncertainties in low-cycle fatigue testing
doa: 2005.07.31 dop: dow:
CWA 15261-2:2005
Measurement uncertainties in mechanical tests on
metallic materials - Part 2: The evaluation of
uncertainties in tensile testing
doa: 2005.07.31 dop: dow:
CWA 15261-3:2005
Measurement uncertainties in mechanical tests on
metallic materials -Part 3: The evaluation of uncertainties in
creep
doa: 2005.07.31 dop: dow:
H03 PROTECŢIA CONSUMATORULUI
EN 1929-3:2005
Basket trolleys - Part 3: Requirements and tests for
basket trolleys with additional goods carrying
facility(ies), with or without a child carrying facility
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 1929-4:2005
Basket trolleys - Part 4: Requirements and tests for
basket trolleys with additional goods carrying
facility(ies), with or without a child carrying facility,
intended to be used on passenger conveyors
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 1929-7:2005
Basket trolleys - Part 7: Requirements and tests for
basket trolleys with baby and child carrying facilities
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31

H19 CUPTOARE ŞI GRĂTARE NEELECTRICE
EN 30-2-1:1998/A2:2005
Domestic cooking appliances burning gas - Part: 2-1:
Rational use of energy - General
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
H33 îNCĂLŢĂMINTE (EXCLUSIV ÎNCĂLŢĂMINTE
DE PROTECŢIE)
EN 12746:2000/A1:2005
Footwear - Test methods for insoles and insocks -
Water absorption and desorption
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
I02 ELEMENTE DE ASAMBLARE
EN 14831:2005
Fasteners - Tightening performance - Torque/Angle
simplified test method
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
I11 MAŞINI-UNELTE
EN 1870-16:2005
Safety of woodworking machines - Circular sawing
machines - Part 16: Double mitre sawing machines
for V-cutting
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 847-1:2005
Tools for woodworking - Safety requirements - Part 1:
Milling tools, circular saw blades
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 6103:2005
Bonded abrasive products - Permissible unbalances
of grinding wheels as delivered - Static testing (ISO
6103:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
I13 CONTAINERE DE GAZ
EN 13175:2003/A1:2005
Specification and testing for Liquefied Petroleum Gas
(LPG) tank valves and fittings
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 15996:2005
Gas cylinders - Residual pressure valves - General
requirements and type testing (ISO 15996:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
I17 MAŞINI ÎN GENERAL (INCLUSIV SECURITATEA)
EN 1672-2:2005
Food processing machinery - Basic concepts - Part
2: Hygiene requirements
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
I20 TEHNICA FRIGULUI
EN 14624:2005
Performances of mobile leak detectors and of room
controllers of halogenated refrigerants
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
I31 ROBINETĂRIE
EN 12516-1:2005
Industrial valves - Shell design strength - Part 1:
Tabulation method for steel valve shells
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
Buletinul Standardizării – Mai 2005
I42 ATMOSFERE POTENŢIAL EXPLOZIVE
EN 13463-3:2005
Non-electrical equipment for use in potentially
explosive atmospheres - Part 3: Protection by
flameproof enclosure 'd'
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 13463-6:2005
Non-electrical equipment for use in potentially
explosive atmospheres - Part 6: Protection by control
of ignition source 'b'
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
M01 OŢEL
EN 10207:2005
Steels for simple pressure vessels - Technical
delivery requirements for plates, strips and bars
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 10333:2005
Steel for packaging - Flat steel products intended for
use in contact with foodstuffs, products and
beverages for human and animal consumption - Tin
coated steel (tinplate)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 10334:2005
Steel for packaging - Flat steel products intended for
use in contact with foodstuffs, products and
beverages for human and animal consumption - Non-
coated steel (blackplate)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 10335:2005
Steel for packaging - Flat steel products intended for
use in contact with foodstuffs, products or
beverages for human and animal consumption - Non
alloyed electrolytic chromium/chromium oxide coated
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
M03 TEHNOLOGIA DE TURNARE, INCLUSIV A
FONTEI
EN 10293:2005
Steel castings for general engineering uses
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
M04 CUPRU
EN 12735-1:2001/A1:2005
Copper and copper alloys - Seamless, round copper
tubes for air conditioning and refrigeration - Part 1:
Tubes for piping systems
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 12735-2:2001/A1:2005
Copper and copper alloys - Seamless, round copper
tubes for air conditioning and refrigeration - Part 2:
Tubes for equipment
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 13348:2001/A1:2005
Copper and copper alloys - Seamless, round copper
tubes for medical gases or vacuum
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
M05 SUDARE
EN 14640:2005
Welding consumables - Solid wires and rods for
fusion welding of copper and copper alloys -
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
9

Buletinul Standardizării – Mai 2005
EN 14717:2005
Welding and allied processes - Environmental check
list
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 15614-2:2005
Specification and qualification of welding procedures
for metallic materials - Welding procedure test - Part
2: Arc welding of aluminium and its alloys (ISO
15614-2:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
M15 COROZIUNE METALICĂ
EN 14505:2005
Cathodic protection of complex structures
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14571:2005
Metallic coatings on nonmetallic basis materials -
Measurement of coating thickness - Microresistivity
method
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
N01 HÂRTIE ŞI CARTON
EN ISO 12625-3:2005
Tissue paper and tissue products - Part 3:
Determination of thickness, bulking thickness and
apparent bulk density (ISO 12625-3:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 12625-4:2005
Tissue paper and tissue products - Part 4:
Determination of tensile strength, stretch at break
and tensile energy absorption (ISO 12625-4:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 12625-5:2005
Tissue paper and tissue products - Part 5:
Determination of wet tensile strength (ISO 12625-
5:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
N05 TEXTILE
EN 13362:2005
Geosynthetic Barriers - Characteristics required for
use in the construction of canals
doa: 2005.07.31 dop: 2005.10.31 dow: 2007.01.31
EN 14575:2005
Geosynthetic barriers - Screening test method for
determining the resistance to oxidation
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14576:2005
Geosynthetics - Test method for determining the
resistance of polymeric geosynthetic barriers to
environmental stress cracking
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14704-1:2005
Determination of the elasticity of fabrics - Part 1:
Strip tests
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 13426-2:2005
Geotextiles and geotextile-related products - Strength
of internal structural junctions - Part 2: Geocomposites
(ISO 13426-2:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
10
EN ISO 3758:2005
Textiles - Care labelling code using symbols (ISO
3758:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
N07 CHERESTEA
EN 48:2005
Wood preservatives - Determination of eradicant
action against larvae of Anobium punctatum (De
Geer) (laboratory method)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
N09 MATERIALE PLASTICE
EN 14447:2005
Fibre reinforced plastics - Glass mat reinforced
thermoplastics (GMT) - Determination of flowability
and solidification
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14598-1:2005
Reinforced thermosetting moulding compounds -
Specification for Sheet Moulding Compound (SMC)
and Bulk Moulding Compound (BMC) - Part 1:
Designation
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14598-2:2005
Reinforced thermosetting moulding compounds -
Specification for Sheet Moulding Compound (SMC)
and Bulk Moulding Compound (BMC) - Part 2:
Methods of test and general requirements
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14598-3:2005
Reinforced thermosetting moulding compounds -
Specification for Sheet Moulding Compound (SMC)
and Bulk Moulding Compound (BMC) - Part 3:
Specific requirements
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 9163:2005
Textile glass - Rovings - Manufacture of test
specimens and determination of tensile strength of
impregnated rovings (ISO 9163:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
N20 MATERIALE CERAMICE
EN 1892:2005
Advanced technical ceramics - Mechanical properties
of ceramic composites at high temperature under
inert atmosphere - Determination of tensile properties
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 1893:2005
Advanced technical ceramics - Mechanical properties
of ceramic composites at high temperature in air at
atmospheric pressure - Determination of tensile
properties
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 1894:2005
Advanced technical ceramics - Mechanical properties
of ceramic composites at high temperature under
inert atmosphere - Determination of shear strength
by compression loading of notched specimens
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31

S04 ÎMBRĂCĂMINTE ŞI ECHIPAMENTE DE
PROTECŢIE
EN 14328:2005
Protective clothing - Gloves and armguards
protecting against cuts by powered knives -
Requirements and test methods
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14572:2005
High Performance Helmets for Equestrian Activities
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
S06 VIBRAŢII ŞI ŞOCURI
EN ISO 8041:2005
Human response to vibration - Measuring
instrumentation (ISO 8041:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
S16 MIJLOACE AJUTĂTOARE TEHNICE DE
AJUTOR PENTRU INVALIZI
EN ISO 11199-2:2005
Walking aids manipulated by both arms -
Requirements and test methods - Part 2: Rollators
(ISO 11199-2:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 11199-3:2005
Walking aids manipulated by both arms -
Requirements and test methods - Part 3: Walking
tables (ISO 11199-3:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
S17 APARATE DE PROTECŢIE RESPIRATORIE
EN 14593-1:2005
Respiratory protective devices - Compressed air line
breathing apparatus with demand valve - Part 1:
Apparatus with a full face mask - Requirements,
testing, marking
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14593-2:2005
Respiratory protective devices - Compressed air line
breathing apparatus with demand valve - Part 2:
Apparatus with a half mask at positive pressure -
Requirements, testing, marking
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 14594:2005
Respiratory protective devices - Continuous flow
compressed air line breathing apparatus -
Requirements, testing, marking
doa: 2005.07.31 dop: 2005.10.30 dow: 2005.10.30
EN 404:2005
Respiratory protective devices for self-rescue - Filter
self-rescuer from carbon monoxide with mouthpiece
assembly
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
S25 DESINFECTANTE CHIMICE ŞI ANTISEPTICE
EN 14476:2005
Chemical disinfectants and antiseptics - Virucidal
quantitative suspension test for chemical
disinfectants and antiseptics used in human medicine.
Test method and requirements (phase 2, step 1)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
Buletinul Standardizării – Mai 2005
T01 CONSTRUCŢII NAVALE ŞI STRUCTURI MARITIME
EN 14714:2005
Inland navigation vessels - Connection nozzle for
equipment and devices at cargo tanks - Dimensions
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 19019:2005
Sea-going vessels and marine technology -
Instructions for planning, carrying out and reporting
sea trials (ISO 19019:2005)
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN ISO 6218:2005
Inland navigation vessels - Manually operated
coupling devices for push tows - Safety requirements
and main dimensions (ISO 6218:2005)
doa: 2005.07.01 dop: 2005.10.01 dow: 2005.10.01
T02 AERONAUTICĂ ŞI SPAŢIU
EN 12312-18:2005
Aircraft ground support equipment - Specific
requirements - Part 18: Nitrogen or Oxygen units
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 12312-19:2005
Aircraft ground support equipment - Specific
requirements - Part 19: Aircraft jacks, axle jacks and
hydraulic tail stanchions
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
T16 ASCENSOARE ŞI SCĂRI RULANTE
EN 1907:2005
Safety requirements for cableway installations
designed to carry persons - Terminology
doa: 2005.07.31 dop: 2005.10.30 dow: 2005.10.30
EN 81-71:2005
Safety rules for the construction and installation of
lifts - Particular applications to passenger lifts and
goods passenger lifts - Part 71: Vandal resistant lifts
doa: 2005.07.31 dop: 2005.10.30 dow: 2007.01.30
T19 SECURITATE RUTIERĂ
EN 12966-1:2005
Road vertical signs - Variable message traffic signs -
Part 1: Product standard
doa: 2005.07.31 dop: 2005.10.31 dow: 2007.01.31
EN 12966-2:2005
Road vertical signs - Variable message traffic signs -
Part 2: Initial type testing
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
EN 12966-3:2005
Road vertical signs - Variable message traffic signs -
Part 3: Factory production control
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
T20 CONSTRUCŢII FEROVIARE (TREN ŞI
TRAMVAIE)
EN 13749:2005
Railway applications - Methods of specifying
structural requirements of bogie frames
doa: 2005.07.31 dop: 2005.10.31 dow: 2005.10.31
11

Buletinul Standardizării – Mai 2005
EN 14531-1:2005
Railway applications - Methods for calculation of
stopping distances, slowing distances and
immobilization braking - Part 1: General algorithms
doa: 2005.07.31 dop: 2005.10.30 dow: 2005.10.30
Z99 DIVERSE
CWA 15244:2005
Guidance information for the deployment of Dublin
Core metadata
doa: 2005.07.31 dop: dow:
CWA 15245:2005
EU e-Government METADATA FRAMEWORK
doa: 2005.07.31 dop: dow:
CWA 15246:2005
Guidance for the deployment of the EU e-
Government metadata framework
doa: 2005.07.31 dop: dow:
CWA 15247:2005
Guidance information for the deployment of Dublin
Core metadata in Corporate Environments
doa: 2005.07.31 dop: dow:
CWA 15248:2005
Guidelines for machine-processable representation of
Dublin Core Application Profiles
doa: 2005.07.31 dop: dow:
U01 SIMBOLURI GRAFICE PENTRU
ELECTROTEHNICĂ
EN 61360-4:2005
Standard data element types with associated
classification sheme for electric components -- Part
4: IEC reference collection of standard data element
types and component classes
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
U19 INTERFERENŢE RADIO
EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family
standard for machine tools -- Part 1: Emission
doa: 2005-08-01 dop: 2006-02-01 dow: 2008-02-01
EN 61000-3-12:2005
Electromagnetic compatibility (EMC) -- Part 3-12:
Limits - Limits for harmonic currents produced by
equipment connected to public low-voltage systems
with input current > 16 A and

CLC/TR 62102:2005
Electrical safety - Classification of interfaces for
equipment to be connected to information and
communications technology networks
doa: dop: dow:
V24 ECHIPAMENT PENTRU TEHNOLOGIA
INFORMAŢIEI
EN 50065-4-2:2001/A2:2005
Amendment to title and scope of EN to increase the
frequency range up to 30 MHz
doa: 2005-09-01 dop: 2006-03-01 dow: 2008-03-01
V27 SISTEME ŞI ECHIPAMENTE AUDIO, VIDEO
ŞI AUDIO-VIZUALE
EN 62345:2005
ID format for 50 mm magneto-optical disc system
doa: 2005-09-01 dop: 2005-12-01 dow: 2008-02-01
V28 FIBRE OPTICE
EN 61290-11-2:2005
Optical amplifiers - Test methods -- Part 11-2:
Polarization mode dispersion parameter - Poincaré
sphere analysis method
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
EN 61300-2-44:2005
Fibre optic interconnecting devices and passive
components - Basic test and measurement
procedures -- Part 2-44: Tests - Flexing of the strain
relief of fibre optic devices
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
EN 61754-21:2005
Fibre optic connector interfaces -- Part 21: Type SMI
connector family for plastic optical fibre
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
W03 ECHIPAMENTE PENTRU TRACŢIUNE
ELECTRICĂ
EN 50327:2003/A1:2005
Railway applications - Fixed installations -
Harmonization of the rated values for converter groups
and tests on converter groups
doa: 2005-09-01 dop: 2006-03-01 dow: 2008-03-01
W08 CABLURI ELECTRICE
EN 61442:2005
Test methods for accessories for power cables with
rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV
(Um = 42 kV)
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-03-01
W10 ELECTRONICĂ DE PUTERE
EN 62310-1:2005
Static transfer systems (STS) -- Part 1: General and
safety requirements
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
W11 ACCESORII ELECTRICE
EN 60998-2-4:2005
Connecting devices for low voltage circuits for
household and similar purposes -- Part 2-4: Particular
requirements for twist-on connecting devices
doa: 2005-09-01 dop: 2006-03-01 dow: 2008-03-01
Buletinul Standardizării – Mai 2005
W13 ECHIPAMENTE ELECTRICE PENTRU
ATMOSFERĂ EXPLOZIVĂ
EN 61241-17:2005
Electrical apparatus for use in the presence of
combustible dust -- Part 17: Inspection and
maintenance of electrical installations in hazardous
areas (other than mines)
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
W16 LĂMPI ŞI CORPURI DE ILUMINAT
EN 61549:2003/A1:2005
Miscellaneous lamps
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
EN 50107-2:2005
Signs and luminous-discharge-tube installations
operating from a no-load rated output voltage
exceeding 1 kV but not exceeding 10 kV -- Part 2:
Requirements for earth-leakage and open-circuit
protective devices
doa: 2005-09-01 dop: 2006-03-01 dow: 2008-03-01
EN 60983:1996/A1:2005
Miniature lamps
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
EN 60630:1998/A5:2005
Maximum lamp outlines for incandescent lamps
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
W17 ELEMENTE GALVANICE
EN 60086-3:2005
Primary batteries -- Part 3: Watch batteries
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
W22 ECHIPAMENT ELECTRIC AL MAŞINILOR
UNELTE
EN 62061:2005
Safety of machinery - Functional safety of safety-
related electrical, electronic and programmable
electronic control systems
doa: 2005-05-01 dop: 2005-11-01 dow: 2007-12-01
W23 CONDUCTOARE DE BOBINAJ
EN 60317-17:1994/A2:2005
Specifications for particular types of winding wires --
Part 17: Polyvinyl acetal enamelled rectangular
copper wire, class 105
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-03-01
W24 SISTEME DE COMANDĂ LA DISTANŢĂ
EN 60870-6-802:2002/A1:2005
Telecontrol equipment and systems -- Part 6-802:
Telecontrol protocols compatible with ISO standards
and ITU-T recommendations - TASE.2. Object models
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
W26 APARATE ELECTRICE DE UZ CASNIC
EN 60335-2-89:2002/A1:2005
Household and similar electrical appliances - Safety -
- Part 2-89: Particular requirements for commercial
refrigerating appliances with an incorporated or
remote refrigerant condensing unit or compressor
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-02-01
EN 62115:2005
Electric toys - Safety
doa: 2005-06-01 dop: 2006-01-01 dow: 2008-01-01
13

Buletinul Standardizării – Mai 2005
EN 60335-2-5:2003/A1:2005
Household and similar electrical appliances - Safety -
- Part 2-5: Particular requirements for dishwashers
doa: 2005-05-01 dop: 2005-11-01 dow: 2008-02-01
EN 60335-2-34:2002/A1:2005
Household and similar electrical appliances - Safety -
- Part 2-34: Particular requirements for motor
compressors - Items 34/1 and 34/6, 34/2, 34/4
doa: 2005-05-01 dop: 2005-11-01 dow: 2008-02-01
EN 60335-2-3:2002/A1:2005
Household and similar electrical appliances - Safety -
- Part 2-3: Particular requirements for electric irons
doa: 2005-07-01 dop: 2006-01-01 dow: 2008-04-01
EN 60335-2-60:2003/A1:2005
Household and similar electrical appliances - Safety -
- Part 2-60: Particular requirements for whirlpool baths
and whirlpool spas
doa: 2005-05-01 dop: 2005-11-01 dow: 2008-02-01
EN 60335-2-24:2003/A1:2005
Household and similar electrical appliances - Safety -
- Part 2-24: Particular requirements for refrigerating
appliances, ice-cream appliances and ice-makers
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
EG 202 057-3 Version 1.1.1
Comitet Tehnic ETSI: STQ
Speech Processing, Transmission and Quality Aspects (STQ);
User related QoS parameter definitions and
measurements; Part 3: QoS parameters specific to Public
Land Mobile Networks (PLMN)
EG 202 387 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 7
Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN); Security
Design Guide; Method for application of Common Criteria to
ETSI deliverables
EN 300 386 Version 1.3.3
Comitet Tehnic ETSI: ERM EMC
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Telecommunication network equipment;
ElectroMagnetic Compatibility (EMC) requirements
EN 300 392-12-22 Version 1.3.1
Comitet Tehnic ETSI: TETRA 3
Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D);
Part 12: Supplementary services stage 3; Sub-part 22:
Dynamic Group Number Assignment (DGNA)
EN 301 842-1 Version 1.2.1
Comitet Tehnic ETSI: ERM TG25
Electromagnetic compatibility and Radio spectrum Matters
(ERM); VHF air-ground Digital Link (VDL) Mode 4 radio
equipment; Technical characteristics and methods of
measurement for ground-based equipment; Part 1: EN for
ground equipment
EN 301 842-2 Version 1.3.1
Comitet Tehnic ETSI: ERM TG25
Electromagnetic compatibility and Radio spectrum Matters
(ERM); VHF air-ground Data Link (VDL) Mode 4 radio
equipment; Technical characteristics and methods of
measurement for ground-based equipment; Part 2: Data link
layer
14
W33 APARATAJ DE COMUTAŢIE DE JOASĂ
TENSIUNE
EN 60947-5-5:1997/A1:2005
Low-voltage switchgear and controlgear -- Part 5-5:
Control circuit devices and switching elements -
Electrical emergency stop device with mechanical
latching function
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
EN 60947-5-3:1999/A1:2005
Low-voltage switchgear and controlgear -- Part 5-3:
Control circuit devices and switching elements -
Requirements for proximity devices with defined
behaviour under fault conditions (PDF)
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
W34 SIGURANŢE FUZIBILE DE JOASĂ
TENSIUNE
STANDARDE EUROPENE ETSI APROBATE
În perioada de la 2005-04-01 până la 2005-04-30
EN 60127-4:2005
Miniature fuses -- Part 4: Universal modular fuse-links
(UMF) - Through-hole and surface mount types
doa: 2005-06-01 dop: 2005-12-01 dow: 2008-03-01
EN 301 842-2 Version 1.4.1
Comitet Tehnic ETSI: ERM TG25
Electromagnetic compatibility and Radio spectrum Matters
(ERM); VHF air-ground Digital Link (VDL) Mode 4 radio
equipment; Technical characteristics and methods of
measurement for ground-based equipment; Part 2: General
description and data link layer
ES 202 382 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 7
Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN); Security
Design Guide; Method and proforma for defining Protection
Profiles
ES 202 383 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 7
Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN); Security
Design Guide; Method and proforma for defining Security
Targets
ES 202 915-2 Version 1.3.2
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 2: Common Data Definitions (Parlay 4)
ES 203 915-1 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 1 : Overview (Parlay 5)
ES 203 915-10 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 10: Connectivity Manager SCF (Parlay 5)
ES 203 915-11 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 11: Account Management SCF (Parlay 5)

ES 203 915-12 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 12: Charging SCF (Parlay 5)
ES 203 915-13 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 13: Policy Management SCF (Parlay 5)
ES 203 915-14 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 14: Presence and Availability
Management SCF (Parlay 5)
ES 203 915-15 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 15: Multi-Media Messaging SCF
(Parlay 5)
ES 203 915-2 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 2 : Common Data Definitions (Parlay 5)
ES 203 915-3 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 3: Framework (Parlay 5)
ES 203 915-4-1 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 4: Call Control; Sub-part 1: Call Control
Common Definitions (Parlay 5)
ES 203 915-4-2 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 4: Call Control; Sub-part 2: Generic Call
Control SCF (Parlay 5)
ES 203 915-4-3 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 4: Call Control; Sub-part 3: Multi-Party
Call Control SCF (Parlay 5)
ES 203 915-4-4 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 4: Call Control; Sub-part 4: Multi-Media
Call Control SCF (Parlay 5)
ES 203 915-4-5 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 4: Call Control; Sub-part 5: Conference
Call Control SCF (Parlay 5)
ES 203 915-5 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 5: User Interaction SCF (Parlay 5)
ES 203 915-6 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 6: Mobility SCF (Parlay 5)
ES 203 915-7 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 7: Terminal Capabilities SCF (Parlay 5)
Buletinul Standardizării – Mai 2005
ES 203 915-8 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 8: Data Session Control SCF (Parlay 5)
ES 203 915-9 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 1
Open Service Access (OSA); Application Programming
Interface (API); Part 9: Generic Messaging SCF (Parlay 5)
SR 000 314 Version 1.14.1
Comitet Tehnic ETSI: IPRC
Intellectual Property Rights (IPRs); Essential, or potentially
Essential, IPRs notified to ETSI in respect of ETSI
standards
TR 101 518 Version 6.4.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Interworking between modified PLMN supporting GPRS and
legacy GPRS mobiles (3GPP TR 09.95 version 6.4.0 Release
1997)
TR 101 518 Version 7.4.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Interworking between modified PLMN supporting GPRS and
legacy GPRS mobiles (3GPP TR 09.95 version 7.4.0 Release
1998)
TR 101 518 Version 8.0.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Interworking between modified PLMN supporting GPRS and
legacy GPRS mobiles (3GPP TR 09.95 version 8.0.0 Release
1999)
TR 102 055 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 4
Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN); ENUM
scenarios for user and infrastructure ENUM
TR 102 378 Version 1.1.1
Comitet Tehnic ETSI: ERM RM
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Short Range Devices (SRD); Equipment for
identification and location systems; System Reference
Document for inductive systems for industrial applications
operating in the frequency range from 400 kHz to 600 kHz
TR 102 400 Version 1.1.1
Comitet Tehnic ETSI: ERM RM
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Short Range Devices (SRD); Intelligent Transport
Systems (ITS); Road Traffic and Transport Telematics (RTTT);
Technical characteristics for communications equipment
in the frequency band from 63 GHz to 64 GHz; System
Reference Document
TR 102 419 Version 1.1.1
Comitet Tehnic ETSI: TISPAN 7
Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN); Security
analysis of IPv6 application in telecommunications standards
TR 102 422 Version 1.1.1
Comitet Tehnic ETSI: MTS
Methods for Testing and Specification (MTS) IMS Network
Integration Testing Infrastructure Testing Methodology
TR 133 978 Version 6.0.1
Comitet Tehnic ETSI: 3GPP SA
Universal Mobile Telecommunications System (UMTS);
Security aspects of early IMS (3GPP TR 33.978 version 6.0.1
Release 6)
15

Buletinul Standardizării – Mai 2005
TR 149 995 Version 4.0.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Interworking between modified PLMN supporting GPRS and
legacy GPRS mobiles (3GPP TR 49.995 version 4.0.0
Release 4)
TR 149 995 Version 5.0.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Interworking between modified PLMN supporting GPRS and
legacy GPRS mobiles (3GPP TR 49.995 version 5.0.0
Release 5)
TR 149 995 Version 6.0.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Interworking between modified PLMN supporting GPRS and
legacy GPRS mobiles (3GPP TR 49.995 version 6.0.0
Release 6)
TS 100 910 Version 8.18.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version
8.18.0 Release 1999)
TS 100 933 Version 8.5.1
Comitet Tehnic ETSI: 3GPP CT
Digital cellular telecommunications system (Phase 2+); Voice
Group Call Service (VGCS); Stage 2 (3GPP TS 03.68
version 8.5.1 Release 1999)
TS 101 220 Version 7.1.0
Comitet Tehnic ETSI: SCP TEC
Smart cards; ETSI numbering system for telecommunication
application providers (Release 7)
TS 101 503 Version 8.26.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol (3GPP TS 04.18 version 8.26.0
Release 1999)
TS 101 527 Version 7.19.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Location Services (LCS); Mobile Station (MS) - Serving Mobile
Location Centre (SMLC) Radio Resource LCS Protocol
(RRLP) (3GPP TS 04.31 version 7.19.0 Release 1998)
TS 102 172 Version 1.2.1
Comitet Tehnic ETSI: TISPAN 4
Telecommunications and Internet converged Services and
Protocols for Advanced Networking (TISPAN); Minimum
requirements for interoperability of ENUM implementations
TS 102 241 Version 6.0.1
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
TS 102 241 Version 6.1.1
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
TS 102 241 Version 6.2.1
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
TS 102 241 Version 6.3.1
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
16
TS 102 241 Version 6.4.1
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
TS 102 241 Version 6.5.1
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
TS 102 241 Version 6.7.0
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 6)
TS 102 241 Version 7.1.0
Comitet Tehnic ETSI: SCP TEC
Smart cards; UICC Application Programming Interface (UICC
API) for Java Card (TM) (Release 7)
TS 102 250-3 Version 1.3.1
Comitet Tehnic ETSI: STQ MOBILE
Speech Processing, Transmission and Quality Aspects (STQ);
QoS aspects for popular services in GSM and 3G
networks; Part 3: Typical procedures for Quality of Service
measurement equipment
TS 102 361-1 Version 1.1.1
Comitet Tehnic ETSI: ERM TGDMR
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Technical Requirements for Digital Mobile Radio
(DMR); Part 1: Air Interface (AI) protocol
TS 102 361-2 Version 1.1.1
Comitet Tehnic ETSI: ERM TGDMR
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Technical Requirements for Digital Mobile Radio
(DMR); Part 2: DMR voice and generic services and facilities
TS 125 306 Version 6.4.1
Comitet Tehnic ETSI: 3GPP RAN
Universal Mobile Telecommunications System (UMTS); UE
Radio Access capabilities definition (3GPP TS 25.306
version 6.4.1 Release 6)
TS 129 228 Version 6.6.1
Comitet Tehnic ETSI: 3GPP CT
Digital cellular telecommunications system (Phase 2+);
Universal Mobile Telecommunications System (UMTS); IP
Multimedia (IM) Subsystem Cx and Dx Interfaces; Signalling
flows and message contents (3GPP TS 29.228 version
6.6.1 Release 6)
TS 132 603 Version 6.3.1
Comitet Tehnic ETSI: 3GPP SA
Digital cellular telecommunications system (Phase 2+);
Universal Mobile Telecommunications System (UMTS);
Telecommunication management; Configuration Management
(CM); Basic CM Integration Reference Point (IRP):
Common Object Request Broker Architecture (CORBA)
Solution Set (SS) (3GPP TS 32.603 version 6.3.1 Release 6)
TS 134 123-1 Version 5.11.1
Comitet Tehnic ETSI: 3GPP RAN
Universal Mobile Telecommunications System (UMTS); User
Equipment (UE) conformance specification; Part 1:
Protocol conformance specification (3GPP TS 34.123-1
version 5.11.1 Release 5)
TS 143 022 Version 4.6.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Functions related to Mobile Station (MS) in idle mode and
group receive mode (3GPP TS 43.022 version 4.6.0
Release 4)

TS 143 022 Version 5.2.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Functions related to Mobile Station (MS) in idle mode and
group receive mode (3GPP TS 43.022 version 5.2.0 Release
5)
TS 143 022 Version 6.3.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Functions related to Mobile Station (MS) in idle mode and
group receive mode (3GPP TS 43.022 version 6.3.0 Release
6)
TS 143 055 Version 6.9.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Dual
Transfer Mode (DTM); Stage 2 (3GPP TS 43.055 version
6.9.0 Release 6)
TS 143 064 Version 6.6.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Overall description of
the GPRS radio interface; Stage 2 (3GPP TS 43.064 version
6.6.0 Release 6)
TS 143 129 Version 6.2.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Packed-switched handover for GERAN A/Gb mode; Stage 2
(3GPP TS 43.129 version 6.2.0 Release 6)
TS 143 318 Version 6.1.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Generic access to the A/Gb interface; Stage 2 (3GPP TS
43.318version 6.1.0 Release 6)
TS 144 014 Version 6.2.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Individual equipment type requirements and interworking;
Special conformance testing functions (3GPP TS 44.014
version 6.2.0 Release 6)
TS 144 018 Version 4.21.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol (3GPP TS 44.018 version 4.21.0
Release 4)
TS 144 018 Version 5.20.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol (3GPP TS 44.018 version 5.20.0
Release 5)
TS 144 018 Version 6.12.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol (3GPP TS 44.018 version 6.12.0
Release 6)
TS 144 060 Version 6.12.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Mobile Station (MS) -
Base Station System (BSS) interface; Radio Link Control /
Medium Access Control (RLC/MAC) protocol (3GPP TS
44.060 version 6.12.0 Release 6)
Buletinul Standardizării – Mai 2005
TS 144 118 Version 5.11.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol; Iu mode (3GPP TS 44.118 version
5.11.0 Release 5)
TS 144 118 Version 6.3.1
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol; Iu mode (3GPP TS 44.118 version
6.3.1 Release 6)
TS 144 118 Version 6.4.1
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
radio interface layer 3 specification; Radio Resource
Control (RRC) protocol; Iu mode (3GPP TS 44.118 version
6.4.1 Release 6)
TS 144 318 Version 6.0.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Generic access to the A/Gb interface; Stage 3 (3GPP TS
44.318 version 6.0.0 Release 6)
TS 145 001 Version 4.5.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Physical layer on the radio path; General description (3GPP
TS 45.001 version 4.5.0 Release 4)
TS 145 001 Version 5.9.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Physical layer on the radio path; General description (3GPP
TS 45.001 version 5.9.0 Release 5)
TS 145 001 Version 6.6.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Physical layer on the radio path; General description (3GPP
TS 45.001 version 6.6.0 Release 6)
TS 145 002 Version 6.9.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
Multiplexing and multiple access on the radio path (3GPP TS
45.002 version 6.9.0 Release 6)
TS 145 005 Version 4.16.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Radio
transmission and reception (3GPP TS 45.005 version
4.16.0 Release 4)
TS 145 005 Version 5.12.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Radio
transmission and reception (3GPP TS 45.005 version
5.12.0 Release 5)
TS 145 005 Version 6.9.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Radio
transmission and reception (3GPP TS 45.005 version
6.9.0 Release 6)
TS 145 008 Version 6.12.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Radio
subsystem link control (3GPP TS 45.008 version 6.12.0
Release 6)
17

Buletinul Standardizării – Mai 2005
TS 145 010 Version 6.5.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Radio
subsystem synchronization (3GPP TS 45.010 version
6.5.0 Release 6)
TS 148 008 Version 6.9.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
Switching Centre - Base Station system (MSC-BSS)
Interface Layer 3 Specification (3GPP TS 48.008 version 6.9.0
Release 6)
TS 148 016 Version 6.3.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Base Station System
(BSS) - Serving GPRS Support Node (SGSN) Interface;
Network Service (3GPP TS 48.016 version 6.3.0 Release 6)
TS 148 018 Version 6.8.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Base Station System
(BSS) - Serving GPRS Support Node (SGSN); BSS GPRS
Protocol (3GPP TS 48.018 version 6.8.0 Release 6)
18
PROIECTE DE STANDARDE EUROPENE
CEN SUPUSE ANCHETEI PUBLICE
În perioada de la 2004-10-01 până la 2004-10-31
TS 151 010-1 Version 6.2.1
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
Station (MS) conformance specification; Part 1:
Conformance specification (3GPP TS 51.010-1 version 6.2.1
Release 6)
TS 151 010-2 Version 6.2.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
Station (MS) conformance specification; Part 2: Protocol
Implementation Conformance Statement (PICS) proforma
specification (3GPP TS 51.010-2 version 6.2.0 Release 6)
TS 151 010-3 Version 6.2.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
Station (MS) conformance specification; Part 3: Layer3
(L3) Abstract Test Suite (ATS) (3GPP TS 51.010-3 version
6.2.0 Release 6)
TS 151 010-5 Version 6.2.0
Comitet Tehnic ETSI: 3GPP GERAN
Digital cellular telecommunications system (Phase 2+); Mobile
Station (MS) conformance specification; Part 5: Inter-
Radio-Access-Technology (RAT) (GERAN / UTRAN)
interaction Abstract Test Suite (ATS) (3GPP TS 51.010-5
version 6.2.0 Release 6)
Proiectele de standarde de mai jos sunt supuse anchetei publice. Asupra acestor proiecte poate face
observaţii orice persoană fizică sau juridică. Proiectele pot fi obţinute de la ASRO precizând indicativul şi
titlul standardului. Observaţiile trebuie transmise pe adresa Asociaţiei de Standardizare din România până la
termenul indicat după fiecare proiect, termen care reprezintă sfârşitul anchetei publice.
B02 STRUCTURI
prEN 15237
Execution of special geotechnical works - Vertical
drainage
dea : 2005.10.14
B09 PROTECŢIE TERMICĂ
prEN ISO 10211
Thermal bridges in building construction - Heat flows
and surface temperatures - Detailed calculations
(ISO/DIS 10211:2005)
dea : 2005.09.07
prEN ISO 10456
Building materials and products - Hygrothermal
properties -Tabulated design values and procedures
for determining declared and design thermal values
(ISO/DIS 10456:2005)
dea : 2005.09.07
prEN ISO 13370
Thermal performance of buildings - Heat transfer via
the ground - Calculation methods (ISO/DIS 13370)
dea : 2005.09.07
prEN ISO 13789
Thermal performance of buildings - Transmission and
ventilation heat transfer coefficients - Calculation
method (ISO/DIS 13789:2005)
dea : 2005.09.07
prEN ISO 14683
Thermal bridges in building construction - Linear
thermal transmittance - Simplified methods and
default values (ISO/DIS 14683:2005)
dea : 2005.09.07
prEN ISO 6946
Building components and building elements - Thermal
resistance and thermal transmittance - Calculation
method (ISO/DIS 6946:2005)
dea : 2005.09.07
B10 STRUCTURI DE LEMN
prEN 15228
Structural timber - Structural timber preservative
treated against biological attack
dea : 2005.09.14
B11 STRUCTURI METALICE
prEN 1090-2
Execution of steel structures and aluminium
structures - Part 2: Technical requirements for the
execution of steel structures - Stage 34
dea : 2005.05.09
prEN 1090-3
Execution of steel and aluminium structures - Part 3:
Technical rules for execution of aluminium structures
dea : 2005.05.09

B14 GEOTEHNICĂ
prEN ISO 22477-5
Geotechnical investigation and testing - Testing of
geotechnical structures - Part 5: Testing of
anchorages (ISO/DIS 22477-5:2005)
dea : 2005.09.21
B31 INSTALAŢII DE ÎNCĂLZIRE ÎN CLĂDIRI
prEN 15232
Calculation methods for energy efficiency
improvements by the application of integrated
building automation systems
dea : 2005.09.21
C01 PRODUSE ALIMENTARE
prEN ISO 14501
Milk and milk powder - Determination of aflatoxin M1
content - Clean-up by immunoaffinity
chromatography and determination by high-
performance liquid chromatography (ISO/DIS 14501:2005)
dea : 2005.08.30
C02 VOPSELE ŞI PRODUSE CONEXE
prEN ISO 11507
Paints and varnishes - Exposure of coatings to
artificial weathering - Exposure to fluorescent UV
and water (ISO/DIS 11507:2005)
dea : 2005.09.14
prEN ISO 1520
Paints and varnishes - Cupping test (ISO/DIS 1520:2005)
dea : 2005.09.14
prEN ISO 1522
Paints and varnishes - Pendulum damping test
(ISO/DIS 1522:2005)
dea : 2005.09.14
prEN ISO 16773-2
Paints and varnishes - Electrochemical impedance
spectroscopy (EIS) on high-impedance coated
samples - Part 2: Experimental procedures and
requirements for data collection (ISO/DIS 16773-2:2005)
dea : 2005.09.07
prEN ISO 21227-3
Paints and varnishes - Evaluation of defects on
coated surfaces using optical imaging - Part 3:
Evaluation of delamination and corrosion around a
scribe (ISO/DIS 21227-3:2005)
dea : 2005.09.14
prEN ISO 4628-6
Paints and varnishes - Evaluation of degradation of
coatings - Designation of quantity and size of
defects, and of intensity of uniform changes in
appearance - Part 6: Assessment of degree of
chalking by tape method (ISO/DIS 4628-6:2005)
dea : 2005.09.21
C13 ÎNGRĂŞĂMINTE
prEN 15238
Soil improvers and growing media - Determination of
quantity for materials with particle size greater than 60 mm
dea : 2005.09.28
F05 MIJLOACE DE MĂSURĂ
prEN ISO 748
Measurement of liquid flow in open channels -
Velocity-area methods (ISO/DIS 748:2005)
dea : 2005.09.07
Buletinul Standardizării – Mai 2005
H18 CAZANE PENTRU ÎNCĂLZIRE CENTRALĂ
EN 483:1999/prA4
Gas fired central heating boilers - Type C boilers of
nominal heat input not exceeding 70kW
dea : 2005.10.14
H29 POMPE DE CĂLDURĂ
prEN 13771-2
Compressors and condensing units for refrigeration -
Performance testing and test methods - Part 2:
Condensing units
dea : 2005.10.07
prEN 15218
Air conditioners and liquid chilling packages with
evaporatively cooled condenser and with electrically
driven compressors for space cooling - Terms,
definitions, test conditions, test methods and
requirements
dea : 2005.09.07
I11 MAŞINI-UNELTE
prEN 859
Safety of woodworking machines - Hand fed surface
planing machines
dea : 2005.10.28
prEN 860
Safety of woodworking machines - One side
thickness planing machines
dea : 2005.10.28
prEN 861
Safety of woodworking machines - Surface planing
and thicknessing machines
dea : 2005.10.28
I17 MAŞINI ÎN GENERAL (INCLUSIV SECURITATEA)
prEN 1093-2
Safety of machinery - Evaluation of the emission of
airborne hazardous substances - Part 2: Tracer
method for assessing the emission rate of a
specified pollutant
dea : 2005.09.21
prEN 1093-3
Safety of machinery - Evaluation of the emission of
airborne hazardous substances - Part 3: Bench test
method for the measurement of the emission rate of
a specified pollutant
dea : 2005.09.21
I30 DISTRIBUŢIA AERULUI
prEN 13779
Ventilation for non-residential buildings -
Performance requirements for ventilation and room-
conditioning systems
dea : 2005.09.28
prEN 15239
Ventilation for buildings - Energy performance of
buildings - Guidelines for inspection of ventilation
systems
dea : 2005.09.28
prEN 15240
Ventilation for buildings - Energy performance of
buildings - Guidelines for inspection of air-
conditioning systems
dea : 2005.09.28
19

Buletinul Standardizării – Mai 2005
prEN 15241
Ventilation for buildings - Calculation methods for
energy losses due to ventilation and infiltration in
commercial buildings
dea : 2005.10.28
prEN 15242
Ventilation for buildings - Calculation methods for the
determination of air flow rates in buildings including
infiltration
dea : 2005.10.28
I31 ROBINETĂRIE
prEN 12982
Industrial valves - End-to-end and centre-to-end
dimensions for butt welding end valves
dea : 2005.10.07
I42 ATMOSFERE POTENŢIAL EXPLOZIVE
prEN 14591-4
Explosion prevention and protection in underground
mines - Protective systems - Part 4: Automatic
extinguishing systems for road headers
dea : 2005.10.21
prEN 15233
Methodology for functional safety assessment of
protective systems for potentially explosive
atmospheres
dea : 2005.09.21
M01 OŢEL
prEN ISO 3183
Petroleum and natural gas industries - Steel pipe for
pipeline transportation systems (ISO/DIS 3183:2005)
dea : 2005.09.28
M08 ALIAJE UŞOARE
prEN 570 rev
Aluminium and aluminium alloys - Impact extrusion
slugs obtained from wrought products - Specification
dea : 2005.10.14
prEN 573-5
Aluminium and aluminium alloys - Chemical
composition and form of wrought products - Part 5:
Codification of standardized wrought products
dea : 2005.08.14
M10 ACOPERIRI METALICE
prEN 1395-1
Thermal spraying - Acceptance inspection of thermal
spraying equipment - Part 1: General requirements
dea : 2005.09.21
prEN 1395-2
Thermal spraying - Acceptance inspection of thermal
spraying equipment - Part 2: Flame spraying
including HVOF
dea : 2005.09.21
prEN 1395-3
Thermal spraying - Acceptance inspection of thermal
spraying equipment - Part 3: Arc spraying
dea : 2005.09.21
prEN 1395-4
Thermal sprying - Acceptance inspection of thermal
spraying equipment - Part 4: Plasma spraying
dea : 2005.09.21
20
prEN 1395-5
Thermal spraying - Acceptance inspection of thermal
spraying equipment - Part 5: Plasma spraying in
chambers
dea : 2005.09.21
prEN 1395-6
Thermal spraying - Acceptance inspection of thermal
spraying equipment - Part 6: Manipulator systems
dea : 2005.09.21
N01 HÂRTIE ŞI CARTON
prEN ISO 12625-7
Tissue paper and tissue products - Part 7:
Determination of optical properties
(ISO/DIS 12625-7:2005)
dea : 2005.09.21
N07 CHERESTEA
prEN 1390
Wood preservatives - Determination of the eradicant
action against Hylotrupes bajulus (Linnaeus) larvae
- Laboratory method
dea : 2005.10.21
N09 MATERIALE PLASTICE
EN ISO 180:2000/prA1
Plastics - Determination of Izod impact strength
(ISO 180:2000/DAM 1:2005)
dea : 2005.09.14
prEN ISO 1269
Plastics - Homopolymer and copolymer resins of
vinyl chloride - Determination of volatile matter
(including water) (ISO/DIS 1269:2005)
dea : 2005.09.14
N21 COMBUSTIBILI GAZOŞI ŞI GAZE
COMBUSTIBILE
prEN ISO 6326-1
Natural gas - Determination of sulfur compounds -
Part 1: General introduction (ISO 6326-1:1989)
dea : 2005.10.07
S02 APARATE PENTRU TRANSFUZII
prEN ISO 8871-4
Elastomeric parts for parenterals and for devices for
pharmaceutical use - Part 4: Biological requirements
and test methods (ISO/DIS 8871-4:2005)
dea : 2005.09.14
S05 STOMATOLOGIE
prEN ISO 14801
Dentistry - Fatigue test for endosseous dental
implants (ISO/DIS 14801:2005)
dea : 2005.09.21
prEN ISO 15841
Dentistry - Orthodontic materials - Wires (ISO/DIS
15841:2005)
dea : 2005.09.21
prEN ISO 1942
Dentistry - Vocabulary (ISO/DIS 1942:2005)
dea : 2005.06.28
prEN ISO 22674
Dentistry - Metallic materials for fixed and
removable dental restorations and appliances
(ISO/DIS 22674:2005)
dea : 2005.09.14

S08 CALITATEA AERULUI
prEN 482
Workplace atmospheres - General requirements for
the performance of procedures for the measurement
of chemical agents
dea : 2005.09.21
S09 CALITATEA APEI ŞI A ALIMENTĂRILOR CU
APĂ
prEN 15219
Water equipment inside buildings - Nitrate removal
devices - Requirements for performance, safety and testing
dea : 2005.10.07
S13 ERGONOMIE
prEN ISO 15743
Ergonomics of the thermal environment - Cold
workplaces - Risk assessment and management
(ISO/DIS 15743:2005)
dea : 2005.09.21
T06 RECIPIENTE DE METAL ŞI DE MATERIAL
PLASTIC
prEN 12972
Tanks for transport of dangerous goods - Testing,
inspection and marking of metallic tanks
dea : 2005.09.21
Buletinul Standardizării – Mai 2005
T16 ASCENSOARE ŞI SCĂRI RULANTE
prEN 115
Safety rules for the construction and installation of
escalators and moving walks
dea : 2005.10.14
T20 CONSTRUCŢII FEROVIARE (TREN ŞI
TRAMVAIE)
prEN 14033-2
Railway applications - Track - Railbound construction
and maintenance machines - Part 2: Technical
requirements for working
dea : 2005.10.21
prEN 15220-1
Railway applications - Brake indicators - Part 1:
Pneumatic operation brake indicators
dea : 2005.10.07
PROIECTE DE STANDARDE EUROPENE
CENELEC SUPUSE ANCHETEI PUBLICE
În perioada de la 2005-04-01 până la 2005-04-30
prEN 15227
Railway applications - Crashworthiness requirements
for railway vehicle bodies
dea : 2005.10.14
Proiectele de standarde de mai jos sunt supuse anchetei publice. Asupra acestor proiecte poate face
observaţii orice persoană fizică sau juridică. Proiectele pot fi obţinute de la ASRO precizând indicativul şi
titlul standardului. Observaţiile trebuie transmise pe adresa Asociaţiei de Standardizare din România până la
termenul indicat după fiecare proiect, termen care reprezintă sfârşitul anchetei publice.
U01 SIMBOLURI GRAFICE PENTRU
ELECTROTEHNICĂ
prEN 61747-3:2005
Liquid crystal display devices -- Part 3: Sectional
specification for liquid crystal diplay (LCD) cells
dea: 2005-09-09
prEN 61326-3-1:2005
Electrical equipment for measurement, control and
laboratory use - EMC requirements -- Part 3-1:
Immunity requirements for equipment performing or
intended to perform safety related functions
(functional safety) - General industrial applications
dea: 2005-09-23
prEN 62076:2005
Test methods for induction channel and induction
crucible furnaces
dea: 2005-09-30
prEN 62395-1:2005
Electrical resistance trace heating systems for
industrial and commercial applications -- Part 1:
General and testing requirements
dea: 2005-09-30
prEN 61747-3-1:2005
Liquid crystal display devices -- Part 3-1: Liquid
crystal display (LCD) cells - Blank detail specification
dea: 2005-09-09
prEN 61192-5:2005
Workmanship requirements for soldered electronic
assemblies -- Part 5: Rework, modification and repair
of soldered electronic assemblies
dea: 2005-09-09
prEN 60191-6-16:2005
Mechanical standardization of semiconductor devices
Part 6-16: Glossary of semiconductor test and burn-
in socket for BGA, LGA, FBGA and FLGA
dea: 2005-09-09
prEN 60191-6-13:2005
Mechanical standardization of semiconductor devices
Part 6-13: design guideline of open-top type socket
for Fine-pitch Ball Grid Array and Fine-pitch Land Grid
Array (FBGA/FLGA)
dea: 2005-09-09
prEN 60068-2-2:2005
Environmental testing -- Part 2-2: Tests - Tests B: Dry
heat
dea: 2005-10-07
21

Buletinul Standardizării – Mai 2005
prEN 61966-2-4:2005
Multimedia systems and equipment - Colour
measurement and management -- Part 2-4: Colour
management - Extended-gamut YCC colour space for
video applications - xvYCC (TA2)
dea: 2005-10-07
U04 FLUIDE ELECTROIZOLANTE
prEN 60567:2005
Fluide for the sampling of gases and of oil from oil-
filled electrical equipment and for the analysis of free
and dissolved gases
dea: 2005-06-10
U05 MATERIALE ELECTROIZOLANTE
prEN 60216-2:2005
Electrical insulating materials - Thermal endurance
properties -- Part 2: Guide for the determination of
thermal endurance properties of electrical insulating
materials - Choice of test criteria
dea: 2005-07-08
U08 SUDURĂ ELECTRICĂ
prEN 60974-7:2005
Arc welding equipment -- Part 7:Torches
dea: 2005-07-01
prEN 60974-1:2005
Arc welding equipment -- Part 1: Welding power
sources
dea: 2005-07-01
U11 ÎNCERCĂRI MECANO-CLIMATICE PENTRU
APARATURA ELECTROTEHNICĂ
prEN 60068-2-30:2005
Environmental testing -- Part 2-30: Tests - Test Db:
Damp heat, cyclic (12 + 12-hour cycle)
dea: 2005-07-08
U19 INTERFERENŢE RADIO
prEN 55022:2005/prAD:2005
Addition of Clause 11: Measurement uncertainty
dea: 2005-07-29
EN 55016-2-1:2004/prA1:2005
Specification for radio disturbance and immunity
measuring apparatus and methods -- Part 2-1:
Methods of measurement of disturbances and
immunity - Conducted disturbance measurements
dea: 2005-06-24
EN 55016-2-3:2004/prA3:2005
Specification for radio disturbance and immunity
measuring apparatus and methods -- Part 2-3:
Methods of measurement of disturbances and
immunity - Radiated disturbance measurements
(Amplitude probability distribution (APD) -
Measurement method)
dea: 2005-10-07
prEN 61000-4-12:2005
Electromagnetic compatibility (EMC) -- Part 4-12:
Testing and measurement techniques - Ring wave
immunity test
dea: 2005-09-09
EN 55016-2-2:2004/prA2:2005
Specification for radio disturbance and immunity
measuring apparatus and methods -- Part 2-2:
Methods of measurement of disturbances and
immunity - Measurement of disturbance power
dea: 2005-06-24
22
EN 55016-2-3:2004/prA2:2005
Specification for radio disturbance and immunity
measuring apparatus and methods -- Part 2-3:
Methods of measurement of disturbances and
immunity - Radiated disturbance measurements
(Amplitude probability distribution (APD) -
Measurement method)
dea: 2005-06-24
U93 FACTORI DE RISC ÎN DOMENIUL
ELECTROMAGNETIC
prEN 50421:2005
Product standard to demonstrate the compliance of
stand alone broadcast transmitters with the reference
levels or the basic restrictions related to public human
exposure to radio frequency electromagnetic
fields (30 MHz - 40 GHz)
dea: 2005-06-27
prEN 50413:2005
Basic standard on measurement and calculation
procedures for human exposure to electric, magnetic
and electromagnetic fields (0 Hz - 300 GHz)
dea: 2005-07-22
prEN 50420:2005
Basic standard for the evaluation of human exposure
to electromagnetic fields from a stand alone broadcast
transmitter (30 MHz - 40 GHz)
dea: 2005-06-24
V02 ECHIPAMENTE PENTRU MĂSURĂRI
ELECTRICE
prEN 62056-61:2005
Electricity metering - Data exchange for meter
reading, tariff and load control -- Part 61: Object
identification system (OBIS)
dea: 2005-09-16
prEN 62056-62:2005
Electricity metering - Data exchange for meter
reading, tariff and load control -- Part 62: Interface
classes
dea: 2005-09-16
V06 CONDENSATOARE ŞI REZISTOARE
prEN 60384-14:2005
Fixed capacitors for use in electronic equipment --
Part 14: Sectional specification - Fixed capacitors for
electromagnetic interference suppression and
connection to the supply mains
dea: 2005-06-10
prEN 60384-14-1:2005
Fixed capacitors for use in electronic equipment --
Part 14-1: Blank detail specification - Fixed
capacitors for electromagnetic interference
suppression and connection to the supply mains -
dea: 2005-06-10
V07 APARATURĂ NUCLEARĂ
prEN 62022
Installed monitors for the control and detection of
gamma radiations contained in recyclable or non
recyclable materials transported by vehicles
dea: 2005-07-15
V08 CABLURI ŞI CONDUCTOARE PENTRU
TELECOMUNICAŢII
prEN 61935-1:2005
Testing of balanced communication cabling in
accordance with ISO/IEC 11801 -- Part 1: Installed
cabling
dea: 2005-07-01

V10 COMPONENTE ELECTROMECANICE
prEN 175301-803:2005
Detail Specification: Rectangular connectors - Flat
contacts, 0,8 mm thickness, locking screw not
detachable
dea: 2005-07-08
V12 DISPOZITIVE MAGNETICE
prEN 60556:2005
Measuring methods for properties of gyromagnetic
materials intended for application at microwave
frequencies
dea: 2005-09-23
prEN 60740-1:2005
Laminations for transformers and inductors -- Part 1:
Mechanical and electrical characteristics
dea: 2005-07-08
V15 ECHIPAMENTE ELECTROMEDICALE
prEN 60601-2-27:2005
Medical electrical equipment -- Part 2-27: Particular
requirements for the safety, including essential
performance, of electrocardiographic monitoring
equipment
dea: 2005-06-24
V16 REGULATOARE DE PROCES
prEN 60534-8-4:2005
Industrial-process control valves -- Part 8-4: Noise
considerations - Prediction of noise generated by
hydrodynamic flow
dea: 2005-07-01
V17 ECHIPAMENTE PENTRU MĂSURĂRI
ELECTRONICE
prEN 62008:2005
Performance characteristics and calibration methods
for digital data acquisition systems and relevant
software
dea: 2005-07-01
V18 COMENZI AUTOMATE
EN 60730-2-2:2002/prA1:2005
Automatic electrical controls for household and
similar use -- Part 2-2: Particular requirements for
thermal motor protectors
dea: 2005-06-24
V23 DISPOZITIVE FOTOVOLTAICE
prEN 60904-1:2005
Photovoltaic devices -- Part 1: Measurement of
photovoltaic current-voltage characteristics
dea: 2005-09-30
V27 SISTEME ŞI ECHIPAMENTE AUDIO,
VIDEO ŞI AUDIO-VIZUALE
prEN 61937-7:2005
Digital audio - Interface for non-linear PCM encoded
audio bitstreams applying IEC 60958 -- Part 7: Non-
linear PCM bitstreams according to the ATRAC,
ATRAC2/3 and ATRAC-X formats
dea: 2005-06-10
prEN 62328-2:2005
Multimedia home server systems - Interchangeable
volume/file structure adaptation for broadcasting
receivers -- Part 2: General recording structure
dea: 2005-07-01
prEN 62328-1:2005
Buletinul Standardizării – Mai 2005
Multimedia home server systems - Interchangeable
volume/file structure adaptation for broadcasting
receivers -- Part 1: General description and
architecture
dea: 2005-07-01
prEN 62365:2005
Digital audio - Digital input-output interfacing -
Transmission of digital audio over asynchronous
transfer mode (ATM) networks
dea: 2005-06-17
prEN 62394:2005
Service diagnostic interface for ECHONET
dea: 2005-09-16
V28 FIBRE OPTICE
prEN 61300-2-18:2005
Fibre optic interconnecting devices and passive
components - Basic test and measurement
procedures -- Part 2-18: Tests - Dry heat - High
temperature endurance
dea: 2005-07-01
prEN 61300-2-12:2005
Fibre optic interconnecting devices and passive
components - Basic test and measurement
procedures -- Part 2-12: Tests - Impact
dea: 2005-07-01
prEN 61755-2-1:2005
Fibre optic connector optical interfaces -- Part 2-1:
Optical interface standard single mode non-angled
physically contacting fibres
dea: 2005-10-07
prEN 50377-4-2:2005
Connector sets and interconnect components to be
used in optical fibre communication systems -
Product specifications -- Part 4-2: Type SC-APC
simplex 8 and 9 degree terminated on IEC 60793-2
category B1.1 singlemode fibre
dea: 2005-10-07
prEN 61280-2-10:2005
Fibre optic communication subsystem test
procedures -- Part 2-10: Digital systems - Time-
resolved chirp and alpha-factor measurement of laser
transmitters
dea: 2005-07-01
prEN 61754-22:2005
Fibre optic connector interfaces -- Part 22: Type F-
SMA connector family
dea: 2005-06-24
prEN 61300-2-42:2005
Fibre optic interconnecting devices and passive
components - Basic test and measurement
procedures -- Part 2-42: Tests - Static side load for
connectors
dea: 2005-07-01
W02 TURBINE
EN 61400-11:2003/prA1:2005
Wind turbine generator systems -- Part 11: Acoustic
noise measurement techniques
dea: 2005-09-16
23

Buletinul Standardizării – Mai 2005
W05 TRANSFORMATOARE DE PUTERE
prEN 50464-1:2005 (HD 428.1 S1 & HD 428.3 S1)
Three-phase oil-immersed distribution transformers
50 Hz, from 50 kVA to 2500 kVA with highest voltage
for equipment not exceeding 36 kV -- Part 1: General
requirements
dea: 2005-10-07
W06 APARATAJ DE COMUTAŢIE
prEN 62271-107:2005
High voltage switchgear and controlgear -- Part 107:
Alternating current fused circuit-switchers for rated voltages
above 1 kV up to and including 52 kV
dea: 2005-07-08
W08 CABLURI ELECTRICE
prEN 50382-1:2005
Railway applications - High temperature power cables
for railway rolling stock and having special fire
performance -- Part 1: General requirements
dea: 2005-10-28
prEN 50382-2:2005
Railway applications - High temperature power cables
for railway rolling stock and having special fire
performance -- Part 2: Single core silicone rubber
insulated cables for 120 °C or 150 °C
dea: 2005-10-28
prEN 50393:2005
Test methods and requirements for accessories for
use on distribution cables of rated voltage 0,6/1,0 (1,2) kV
dea: 2005-07-08
W10 ELECTRONICĂ DE PUTERE
CLC/prTR 60919-1:2005
Performance of high-voltage direct current (HVDC)
systems with line-commutated converters -- Part 1:
Steady-state conditions
dea: 2005-07-08
W11 ACCESORII ELECTRICE
prEN 60670-21:2005
Boxes and enclosures for electrical accessories for
household and similar fixed electrical installations --
Part 21: Particular requirements for boxes and
enclosures with provision for suspension means
dea: 2005-10-07
W12 DISPOZITIVE DE ÎNCĂLZIRE ELECTRICĂ
prEN 60519-10:2005
Safety in electroheat installations -- Part 10:
Particular requirements for electrical resistance trace
heating systems for industrial and commercial
dea: 2005-07-08
prEN 60239:2005
Graphite electrodes for electric arc furnaces -
Dimensions and designation
dea: 2005-06-10
prEN 60519-4:2005
Safety in electroheat installations -- Part 4: Particular
requirements for arc furnace installations
dea: 2005-09-09
W13 ECHIPAMENTE ELECTRICE PENTRU
ATMOSFERĂ EXPLOZIVĂ
prEN 60079-11:2005
Electrical apparatus for explosive gas atmospheres --
Part 11: Intrinsic safety "i"
dea: 2005-10-07
24
EN 60079-0:2004/prAA:2005
Amendment to include instructions for the marking of
equipment with reference to Directive 94/9/EC
dea: 2005-08-05
prEN 60079-7:2005
Electrical apparatus for explosive gas atmospheres --
Part 7: Increased safety "e"
dea: 2005-09-30
W15 CONDENSATOARE DE PUTERE
prEN 60871-1:2005
Shunt capacitors for a.c. power systems having a
rated voltage above 1 000 V - Part 1: General
dea: 2005-06-24
W16 LĂMPI ŞI CORPURI DE ILUMINAT
EN 60061-4:1992/prA10:2005
Lamp caps and holders together with gauges for the
control of interchangeability and safety -- Part 4:
Guidelines and general information
dea: 2005-09-16
EN 60064:1995/prA3:2005 (Second vote)
Tungsten filament lamps for domestic and similar
general lighting purposes - Performance requirements
dea: 2005-07-08
EN 60061-3:1993/prA36:2005
Lamp caps and holders together with gauges for the
control of interchangeability and safety -- Part 3: Gauges
dea: 2005-09-16
EN 60061-2:1993/prA34:2005
Lamp caps and holders together with gauges for the
control of interchangeability and safety -- Part 2: Lampholders
dea: 2005-09-16
EN 60061-1:1993/prA37:2005
Lamp caps and holders together with gauges for the
control of interchangeability and safety -- Part 1: Lamp
caps
dea: 2005-09-16
W23 CONDUCTOARE DE BOBINAJ
EN 60317-12:1994/prA2:2005
Specifications for particular types of winding wires --
Part 12: Polyvinyl acetal enamelled round copper
wire, class 120
dea: 2005-07-01
W25 PERFORMANŢELE APARATELOR
ELECTROCASNICE
EN 60704-2-13:2000/prA1:2005
Household and similar electrical appliances - Test
code for the determination of airborne acoustical
noise -- Part 2-13: Particular requirements for range
hoods
dea: 2005-09-30
W26 APARATE ELECTRICE DE UZ CASNIC
EN 60335-2-14:2003/prAA:2005
Household and similar electrical appliances - Safety -
- Part 2-14: Particular requirements for kitchen
machines
dea: 2005-09-23
EN 60745-1:2003/prAA:2005
Hand-held motor-operated electric tools - Safety --
Part 1: General requirements
dea: 2005-10-07

EN 60335-2-75:2004/prA11:2005
Household and similar electrical appliances - Safety -
- Part 2-75: Particular requirements for commercial
dispensing appliances and vending machines
dea: 2005-09-23
EN 60335-2-103:2003/prA1:2005
Household and similar electrical appliances - Safety -
- Part 2-103: Particular requirements for drives for
gates, doors and windows
dea: 2005-09-23
EN 61770:1999/prA2:2005
Electric appliances connected to the water mains -
Avoidance of backsiphonage and failure of hose-sets
dea: 2005-09-23
EN 60335-2-54:2003/prAA:2005
Particular requirements for surface-cleaning
appliances for household use employing liquids or
steam
dea: 2005-09-30
EN 60335-2-4:2002/prA2:2005
Household and similar electrical appliances - Safety -
- Part 2-4: Particular requirements for spin extractors
dea: 2005-09-23
EN 60335-2-31:2003/prA1:2005
Household and similar electrical appliances - Safety -
- Part 2-31: Particular requirements for range hoods
dea: 2005-09-23
EN 60335-1:2002/prA2:2005
Household and similar electrical appliances - Safety -
- Part 1: General requirements
dea: 2005-09-23
prEN 50434:2005 (Second vote)
Safety of household and similar electrical appliances
Particular requirements for powered shredders
dea: 2005-06-17
EN 60335-2-7:2003/prA2:2005
Buletinul Standardizării – Mai 2005
Household and similar electrical appliances - Safety -
Part 2-7: Particular requirements for washing machines
dea: 2005-09-23
EN 60335-2-11:2003/prA2:2005
Household and similar electrical appliances - Safety -
Part 2-11: Particular requirements for tumble dryers
dea: 2005-09-23
EN 60335-2-89:2002/prA2:2005
Household and similar electrical appliances - Safety -
Part 2-89: Particular requirements for commercial
refrigerating appliances with an incorporated or
remote refrigerant condensing unit or compressor
dea: 2005-09-09
W27 INSTALAŢII ELECTRICE ÎN CONSTRUCŢII
prHD 60364-7-709:2005 (Third vote)
Electrical installations of buildings -- Part 7:
Requirements for special installations or locations --
Section 709: Marinas
dea: 2005-06-09
W31 PROTECŢIA ÎMPOTRIVA TRĂSNETULUI
EN 50164-1:1999/prA1:2005
Lightning Protection Components (LPC) -- Part 1:
Requirements for connection components
dea: 2005-07-15
prEN 50164-3:2005
Lightning Protection Components (LPC) -- Part 3:
Requirements for isolating spark gaps
dea: 2005-07-15
EN 50164-2:2002/prA1:2005
Lightning protection components (LPC) -- Part 2:
Requirements for conductors and earth electrodes
dea: 2005-07-15
W33 APARATAJ DE COMUTAŢIE DE JOASĂ
TENSIUNE
EN 60947-4-1:2001/prA2:2005
PROIECTE DE STANDARDE EUROPENE
ETSI SUPUSE ANCHETEI PUBLICE
În perioada de la 2005.04.01 până la 2005.04.30
Low-voltage switchgear and controlgear -- Part 4-1:
Contactors and motor-starters - Electromechanical
contactors and motor-starters
dea: 2005-06-10
Proiectele de standarde de mai jos sunt supuse anchetei publice. Asupra acestor proiecte poate face
observaţii orice persoană fizică sau juridică. Proiectele pot fi obţinute de la ASRO precizând indicativul şi
titlul standardului. Observaţiile trebuie transmise pe adresa Asociaţiei de Standardizare din România până la
termenul indicat după fiecare proiect, termen care reprezintă sfârşitul anchetei publice.
EN 300 220-1 Draft Version 2.1.1
Comitet Tehnic ETSI: ERM TG28
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Short Range Devices (SRD); Radio equipment to be
used in the 25 MHz to 1 000 MHz frequency range with power
levels ranging up to 500 mW; Part 1: Technical
characteristics and test methods
dea: 2005.08.05
EN 300 220-2 Draft Version 2.1.1
Comitet Tehnic ETSI: ERM TG28
Electromagnetic compatibility and Radio spectrum Matters
(ERM); Short Range Devices (SRD); Radio equipment to be
used in the 25 MHz to 1 000 MHz frequency range with power
levels ranging up to 500 mW; Part 2: Harmonized EN
covering essential requirements under article 3.2 of the
R&TTE Directive
dea: 2005.08.05
25

Buletinul Standardizării – Mai 2005
26
STANDARDIZAREA INTERNAŢIONALĂ
În această secţiune sunt cuprinse standardele ISO elaborate în cadrul Organizaţiei Intermaţionale de
Standardizare şi standardele CEI elaborate în cadrul Comisiei Electrotehnice Internaţionale publicate în
cursul lunii aprilie 2005.
ELECTROTEHNICĂ
COMISIA ELECTROTEHNICĂ
INTERNAŢIONALĂ
IEC 60317-0-2 Ed. 2.2 (2005-04)
Specifications for particular types of winding wires - Part 0-2:
General requirements - Enamelled rectangular copper wire
IEC 60684-3-216 Ed. 1.1 (2005-03)
Flexible insulating sleeving - Part 3: Specifications for
individual types of sleeving - Sheet 216: Heat-shrinkable,
flame-retarded, limited-fire-hazard sleeving
IEC 60851-4 Ed. 2.2 (2005-03)
Winding wires - Test methods - Part 4: Chemical properties
IEC 60947-3 Amd.2 Ed. 2.0 (2005-04)
Amendment 2 - Low-voltage switchgear and controlgear - Part
3: Switches, disconnectors, switch-disconnectors and fusecombination
units
IEC 60947-5-3 Ed. 1.1 (2005-04)
Low-voltage switchgear and controlgear - Part 5-3: Control
circuit devices and switching elements - Requirements for
proximity devices with defined behaviour under fault conditions
(PDF)
IEC 60947-5-5 Ed. 1.1 (2005-04)
Low-voltage switchgear and controlgear - Part 5-5: Control
circuit devices and switching elements - Electrical emergency
stop device with mechanical latching function
IEC 61643-1 Ed. 2.0 (2005-03)
Low-voltage surge protective devices - Part 1: Surge protective
devices connected to low-voltage power distribution systems -
Requirements and tests
IEC 60079-27 Ed. 1.0 (2005-04)
Electrical apparatus for explosive gas atmospheres - Part 27:
Fieldbus intrinsically safe concept (FISCO) and Fieldbus nonincendive
concept (FNICO)
IEC 60086-5 Ed. 2.0 (2005-04)
Primary batteries - Part 5: Safety of batteries with aqueous
electrolyte
IEC 60254-1 Ed. 4.0 (2005-04)
Lead-acid traction batteries - Part 1: General requirements and
methods of tests
IEC 60269-1 Ed. 3.1 (2005-04)
Low-voltage fuses - Part 1: General requirements
IEC 61034-1 Ed. 3.0 (2005-04)
Measurement of smoke density of cables burning under
defined conditions - Part 1: Test apparatus
COMPATIBILITATE ELECTROMAGNETICĂ
CISPR 22 Ed. 5.0 (2005-04)
Information technology equipment - Radio disturbance
characteristics - Limits and methods of measurement
CISPR 12 Ed. 5.1 (2005-04)
Vehicles, boats, and internal combustion engine driven
devices - Radio disturbance characteristics - Limits and
methods of measurement for the protection of receivers except
those installed in the vehicle/boat/device itself or in adjacent
vehicles/boats/devices
SISTEME ELECTRICE DE ALIMENTARE
IEC 60364-5-51 Ed. 5.0 (2005-04)
Electrical installations of buildings - Part 5-51: Selection and
erection of electrical equipment - Common rules
ELECTROACUSTICĂ
IEC 62359 Ed. 1.0 (2005-04)
Ultrasonics - Field characterization - Test methods for the
determination of thermal and mechanical indices related to
medical diagnostic ultrasonic fields
INGINERIA TRANSFERULUI DE ENERGIE ŞI CĂLDURĂ
IEC 62093 Ed. 1.0 (2005-03)
Balance-of-system components for photovoltaic systems -
Design qualification natural environments
COMUNICAŢII PRIN FIBRĂ OPTICĂ
IEC 61300-2-19 Ed. 2.0 (2005-03)
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - Part 2-19: Tests -
Damp heat (steady state)
IEC 61754-21 Ed. 1.0 (2005-03)
Fibre optic connector interfaces - Part 21: Type SMI connector
family for plastic optical fibre
APARATURĂ ELECTROCASNICĂ
IEC 60335-2-11 Amd.1 Ed. 6.0 (2005-04) This bilingual
version replaces the English version Amendment 1 -
Household and similar electrical appliances - Safety - Part 2-
11: Particular requirements for tumble dryers
IEC 60335-2-42 Ed. 5.0 (2005-04) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-42: Particular requirements for
commercial electric forced convection ovens, steam cookers
and steam-convection ovens
IEC 60335-2-48 Ed. 4.0 (2005-03) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-48: Particular requirements for
commercial electric grillers and toasters
IEC 60335-2-5 Ed. 5.1 (2005-03)
Household and similar electrical appliances - Safety - Part 2-5:
Particular requirements for dishwashers
IEC 60335-2-73 Ed. 2.0 (2005-04) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-73: Particular requirements for
fixed immersion heaters

IEC 60335-2-40 Amd.1 Ed. 4.0 (2005-03)
Amendment 1 - Household and similar electrical appliances -
Safety - Part 2-40: Particular requirements for electrical heat
pumps, air conditioners and dehumidifiers
IEC 60335-2-13 Amd.1 Ed. 5.0 (2005-04) This bilingual
version replaces the English version Amendment 1 -
Household and similar electrical appliances - Safety - Part 2-
13: Particular requirements for deep fat fryers, frying pans and
similar appliances
IEC 60335-2-13 Ed. 5.1 (2005-04) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-13: Particular requirements for
deep fat fryers, frying pans and similar appliances
IEC 60335-2-26 Ed. 4.0 (2005-04) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-26: Particular requirements for
clocks
IEC 60335-2-31 Ed. 4.0 (2005-04) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-31: Particular requirements for
range hoods
IEC 60335-2-6 Ed. 5.1 (2005-04)
Household and similar electrical appliances - Safety - Part 2-6:
Particular requirements for stationary cooking ranges, hobs,
ovens and similar appliances
IEC 60335-2-78 Ed. 2.0 (2005-04) This bilingual version
replaces the English version Household and similar electrical
appliances - Safety - Part 2-78: Particular requirements for
outdoor barbecues
IEC 60335-2-86 Amd.1 Ed. 2.0 (2005-04)
Amendment 1 - Household and similar electrical appliances -
Safety - Part 2-86: Particular requirements for electric fishing
machines
IEC 60335-2-24 Ed. 6.1 (2005-04)
Household and similar electrical appliances - Safety - Part 2-
24: Particular requirements for refrigerating appliances, icecream
appliances and ice-makers
IEC 60335-2-61 Amd.1 Ed. 2.0 (2005-04)
Amendment 1 - Household and similar electrical appliances -
Safety - Part 2-61: Particular requirements for thermal-storage
room heaters
ECHIPAMENTE ELECTROMEDICALE
IEC 60336 Ed. 4.0 (2005-04)
Medical electrical equipment - X-ray tube assemblies for
medical diagnosis - Characteristics of focal spots
SECURITATE
IEC 61034-2 Ed. 3.0 (2005-04)
Measurement of smoke density of cables burning under
defined conditions - Part 2: Test procedure and requirements
Buletinul Standardizării – Mai 2005
CONSTRUCŢII NAVALE ŞI STRUCTURI MARINE
IEC 61892-2 Ed. 1.0 (2005-03) - HIGHLIGHT
Mobile and fixed offshore units - Electrical installations - Part 2:
System design
TELECOMUNICAŢII
IEC 61970-301 Ed. 1.0 (2005-03) This bilingual version
replaces the English version
Energy management system application program interface
(EMS-API) - Part 301: Common Information Model (CIM) base
ÎNCERCĂRI
IEC 60068-2-47 Ed. 3.0 (2005-04)
Environmental testing - Part 2-47: Test - Mounting of
specimens for vibration, impact and similar dynamic tests
IEC 61010-2-040 Ed. 1.0 (2005-04)
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-040: Particular
requirements for sterilizers and washer disinfectors used to
treat medical materials
ORGANIZAŢIA INTERNAŢIONALĂ
DE STANDARDIZARE
JTC 1 TEHNOLOGIA INFORMAŢIEI
ISO/IEC 19501:2005 Ed. 1
Information technology -- Open Distributed Processing --
Unified Modeling Language (UML) Version 1.4.2 (available in
English only)
ISO/IEC 14165-114:2005 Ed. 1
Information technology -- Fibre Channel -- Part 114: 100 MB/s
Balanced copper physical interface (FC-100-DF-EL-S)
(available in English only)
ISO/IEC 18028-4:2005 Ed. 1
Information technology -- Security techniques -- IT network
security -- Part 4: Securing remote access (available in English
only)
ISO/IEC TR 13818-5:1997/Amd 2:2005 Ed. 1
MPEG-2 IPMP reference software (available in English only)
ISO/IEC 14496-3:2001/Amd 3:2005 Ed. 1
MPEG-1/2 audio in MPEG-4 (available in English only)
ISO/IEC 14496-4:2004/Amd 1:2005 Ed. 1
Conformance testing for MPEG-4 (available in English only)
ISO/IEC 14496-4:2004/Amd 2:2005 Ed. 1
MPEG-4 conformance extensions for XMT and media nodes
(available in English only)
ISO/IEC 14496-4:2004/Amd 3:2005 Ed. 1
Visual new levels and tools (available in English only)
ISO/IEC 14496-4:2004/Amd 4:2005 Ed. 1
IPMPX conformance extensions (available in English only)
ISO/IEC 14496-4:2004/Amd 5:2005 Ed. 1
Conformance extensions for error-resilient simple scalable
profile (available in English only)
ISO/IEC 14496-4:2004/Amd 7:2005 Ed. 1
AFX conformance extensions (available in English only)
ISO/IEC 14496-5:2001/Amd 7:2005 Ed. 1
AFX reference software extensions (available in English only)
27

Buletinul Standardizării – Mai 2005
ISO/IEC 14496-12:2005 Ed. 2
Information technology -- Coding of audio-visual objects -- Part
12: ISO base media file format (available in English only)
ISO/IEC 15444-12:2005 Ed. 2
Information technology -- JPEG 2000 image coding system --
Part 12: ISO base media file format (available in English only)
ISO/IEC 15938-9:2005 Ed. 1
Information technology -- Multimedia content description
interface -- Part 9: Profiles and levels (available in English
only)
ISO/IEC 15938-10:2005 Ed. 1
Information technology - Multimedia content description
Interface -- Part 10: Schema definition (available in English
only)
ISO/IEC TR 21000-12:2005 Ed. 1
Information technology -- Multimedia framework (MPEG-21) --
Part 12: Test Bed for MPEG-21 Resource Delivery (available
in English only)
TC 2 ELEMENTE DE ASAMBLARE
ISO 8992:2005 Ed. 2
Fasteners -- General requirements for bolts, screws, studs and
nuts
TC 6 HÂRTIE, CARTON ŞI CELULOZĂ
ISO 777:2005 Ed. 3
Paper, board and pulp -- Determination of acid-soluble calcium
ISO 778:2005 Ed. 3
Paper, board and pulp -- Determination of acid-soluble copper
ISO 1830:2005 Ed. 2
Paper, board and pulps -- Determination of acid-soluble
manganese
ISO 4094:2005 Ed. 2
Paper, board and pulps -- International calibration of testing
apparatus -- Nomination and acceptance of standardizing and
authorized laboratories
ISO 11093-6:2005 Ed. 2
Paper and board -- Testing of cores -- Part 6: Determination of
bending strength by the three-point method
ISO 12625-3:2005 Ed. 1
Tissue paper and tissue products -- Part 3: Determination of
thickness, bulking thickness and apparent bulk density
ISO 12625-4:2005 Ed. 1
Tissue paper and tissue products -- Part 4: Determination of
tensile strength, stretch at break and tensile energy absorption
ISO 12625-5:2005 Ed. 1
Tissue paper and tissue products -- Part 5: Determination of
wet tensile strength
TC 8 NAVE ŞI TEHNOLOGIE MARITIMĂ
ISO 6218:2005 Ed. 2
Inland navigation vessels -- Manually operated coupling
devices for push tows -- Safety requirements and main
dimensions (available in English only)
ISO 19019:2005 Ed. 1
Sea-going vessels and marine technology -- Instructions for
planning, carrying out and reporting sea trials (available in
English only)
28
ISO 17894:2005 Ed. 1
Ships and marine technology -- Computer applications --
General principles for the development and use of
programmable electronic systems in marine applications
(available in English only)
TC 17 OŢEL
ISO 4955:2005 Ed. 3
Heat-resistant steels
ISO 6931-2:2005 Ed. 2
Stainless steels for springs -- Part 2: Narrow strip
ISO 16143-3:2005 Ed. 1
Stainless steels for general purposes -- Part 3: Wire
ISO 19959:2005 Ed. 1
Visual examination of the surface condition of investment
castings -- Steel, nickel alloys and cobalt alloys
ISO 19960:2005 Ed. 1
Cast steels and alloys with special physical properties
TC 20 AERONAUTICĂ ŞI SPAŢIU
ISO 16004:2005 Ed. 1
Aircraft ground equipment -- Passenger boarding bridge or
transfer vehicle -- Requirements for interface with aircraft
doors
ISO 20683-1:2005 Ed. 1
Aircraft ground equipment -- Design, test and maintenance for
towbarless towing vehicles (TLTV) interfaced with noselanding
gear -- Part 1: Main-line aircraft
TC 21 ECHIPAMENT DE PROTECŢIE LA FOC ŞI DE
STINGERE A INCENDIULUI
ISO 7240-13:2005 Ed. 1
Fire detection and alarm systems -- Part 13: Compatibility
assessment of system components (available in English only)
TC 22 VEHICULE RUTIERE
ISO 6550-4:2005 Ed. 1
Road vehicles -- Sheath-type glow-plugs with conical seating
and their cylinder head housing -- Part 4: M8 x 1 glow-plugs
ISO 16246:2005 Ed. 1
Road vehicles -- M12 x 1,25 spark-plugs with flat seating and
14 mm hexagon and their cylinder head housing (available in
English only)
ISO 8820-2:2005 Ed. 2
Road vehicles -- Fuse-links -- Part 2: User's guide
ISO 11452-4:2005 Ed. 3
Road vehicles -- Component test methods for electrical
disturbances from narrowband radiated electromagnetic
energy -- Part 4: Bulk current injection (BCI)
ISO 21848:2005 Ed. 1
Road vehicles -- Electrical and electronic equipment for a
supply voltage of 42 V -- Electrical loads
ISO 2575:2004/Amd 1:2005 Ed. 4
ISO 3894:2005 Ed. 3
Road vehicles -- Wheels/rims for commercial vehicles -- Test
methods
ISO 8713:2005 Ed. 2
Electric road vehicles -- Vocabulary
ISO 9130:2005 Ed. 2
Motorcycles -- Measurement method for location of centre of
gravity (available in English only)

TC 23 TRACTOARE ŞI MATERIALE AGRICOLE ŞI
FORESTIERE
ISO 500-1:2004/Cor 1:2005 Ed. 1
ISO 16154:2005 Ed. 1
Tractors and machinery for agriculture and forestry --
Installation of lighting, light signalling and marking devices for
travel on public roadways (available in English only)
TC 27 COMBUSTIBILI MINERALI SOLIZI
ISO 15239:2005 Ed. 1
Solid mineral fuels -- Evaluation of the measurement
performance of on-line analysers (available in English only)
TC 29 SCULE MICI
ISO 2976:2005 Ed. 2
Coated abrasives -- Abrasive belts -- Selection of width/length
combinations
ISO 3919:2005 Ed. 4
Coated abrasives -- Flap wheels with shaft
ISO 5429:2005 Ed. 2
Coated abrasives -- Flap wheels with incorporated flanges or
separate flanges
ISO 6103:2005 Ed. 3
Bonded abrasive products -- Permissible unbalances of
grinding wheels as delivered -- Static testing
TC 33 MATERIALE REFRACTARE
ISO 1893:2005 Ed. 2
Refractory products -- Determination of refractoriness-underload
-- Differential method with rising temperature
TC 34 PRODUSE ALIMENTARE
ISO 14461-2:2005 Ed. 1
Milk and milk products -- Quality control in microbiological
laboratories -- Part 2: Determination of the reliability of colony
counts of parallel plates and subsequent dilution steps
(available in English only)
ISO 15322:2005 Ed. 1
Dried milk and dried milk products -- Determination of their
behaviour in hot coffee (Coffee test)
ISO 18395:2005 Ed. 1
Animal and vegetable fats and oils -- Determination of
monoacylglycerols, diacylglycerols, triacylglycerols and
glycerol by high-performance size-exclusion chromatography
(HPSEC) (available in English only)
TC 35 VOPSELE ŞI LACURI
ISO 4623-2:2003/Cor 1:2005 Ed. 1
ISO 9514:2005 Ed. 2
Paints and varnishes -- Determination of the pot life of
multicomponent coating systems -- Preparation and
conditioning of samples and guidelines for testing
TC 38 TEXTILE
ISO 3758:2005 Ed. 2
Textiles -- Care labelling code using symbols
TC 39 MAŞINI-UNELTE
ISO 230-4:2005 Ed. 2
Test code for machine tools -- Part 4: Circular tests for
numerically controlled machine tools
Buletinul Standardizării – Mai 2005
TC 44 SUDARE ŞI PROCEDEE CONEXE
ISO 17641-2:2005 Ed. 1
Destructive tests on welds in metallic materials -- Hot cracking
tests for weldments -- Arc welding processes -- Part 2: Selfrestraint
tests
ISO/TR 17641-3:2005 Ed. 1
Destructive tests on welds in metallic materials -- Hot cracking
tests for weldments -- Arc welding processes -- Part 3:
Externally loaded tests
TC 45 ELASTOMERI ŞI PRODUSE PE BAZĂ DE
ELASTOMERI
ISO 4081:2005 Ed. 2
Rubber hoses and tubing for cooling systems for internalcombustion
engines -- Specification (available in English only)
ISO 126:2005 Ed. 5
Natural rubber latex concentrate -- Determination of dry rubber
content
ISO 5794-1:2005 Ed. 3
Rubber compounding ingredients -- Silica, precipitated,
hydrated -- Part 1: Non-rubber tests
TC 48 STICLĂRIE DE LABORATOR ŞI APARATE CONEXE
ISO 385:2005 Ed. 1
Laboratory glassware -- Burettes
ISO 4788:2005 Ed. 2
Laboratory glassware -- Graduated measuring cylinders
TC 58 BUTELII PENTRU GAZ
ISO 15996:2005 Ed. 1
Gas cylinders -- Residual pressure valves -- General
requirements and type testing (available in English only)
TC 60 ANGRENAJE
ISO/TR 10064-5:2005 Ed. 1
Cylindrical gears -- Code of inspection practice -- Part 5:
Recommendations relative to evaluation of gear measuring
instruments (available in English only)
TC 61 MATERIALE PLASTICE
ISO 14782:1999/Cor 1:2005 Ed. 1
ISO 18280:2005 Ed. 1
Plastics -- Epoxy resins -- Test methods (available in English
only)
ISO 9163:2005 Ed. 2
Textile glass -- Rovings -- Manufacture of test specimens and
determination of tensile strength of impregnated rovings
TC 67 MATERIALE, ECHIPAMENT ŞI STRUCTURI
MARINE PENTRU INDUSTRIILE PETROLULUI ŞI
GAZELOR NATURALE
ISO 13628-8:2002/Cor 1:2005 Ed. 1
(available in English only)
TC 69 APLICAŢII ALE METODELOR STATISTICE
ISO 16269-6:2005 Ed. 1
Statistical interpretation of data -- Part 6: Determination of
statistical tolerance intervals
ISO 3951-1:2005 Ed. 1
Sampling procedures for inspection by variables -- Part 1:
Specification for single sampling plans indexed by acceptance
quality limit (AQL) for lot-by-lot inspection for a single quality
characteristic and a single AQL (available in English only)
29

Buletinul Standardizării – Mai 2005
ISO 21247:2005 Ed. 1
Combined accept-zero sampling systems and process control
procedures for product acceptance
TC 71 BETON, BETON ARMAT ŞI BETON
PRECOMPRIMAT
ISO 1920-2:2005 Ed. 1
Testing of concrete -- Part 2: Properties of fresh concrete
(available in English only)
TC 76 APARATURĂ DE TRANSFUZIE, PERFUZIE,
INJECŢIE, PENTRU UTILIZARE MEDICALĂ ŞI
FARMACEUTICĂ
ISO 15759:2005 Ed. 2
Medical infusion equipment -- Plastics caps with inserted
elastomeric liner for containers manufactured by the blow-fillseal
(BFS) process
TC 83 ECHIPAMENTE PENTRU SPORT ŞI RECREERE
ISO 20957-4:2005 Ed. 1
Stationary training equipment -- Part 4: Strength training
benches, additional specific safety requirements and test
methods (available in English only)
ISO 20957-5:2005 Ed. 1
Stationary training equipment -- Part 5: Pedal crank training
equipment, additional specific safety requirements and test
methods (available in English only)
ISO 20957-6:2005 Ed. 1
Stationary training equipment -- Part 6: Treadmills, additional
specific safety requirements and test methods
ISO 20957-7:2005 Ed. 1
Stationary training equipment -- Part 7: Rowing machines,
additional specific safety requirements and test methods
(available in English only)
ISO 20957-8:2005 Ed. 1
Stationary training equipment -- Part 8: Steppers, stairclimbers
and climbers -- Additional specific safety requirements and test
methods (available in English only)
ISO 20957-9:2005 Ed. 1
Stationary training equipment -- Part 9: Elliptical trainers,
additional specific safety requirements and test methods
ISO 6289:2003/Cor 1:2005 Ed. 1
TC 96 MAŞINI DE RIDICAT
ISO 9926-3:2005 Ed. 1
Cranes -- Training of drivers -- Part 3: Tower cranes
ISO 12480-3:2005 Ed. 1
Cranes -- Safe use -- Part 3: Tower cranes
ISO 12488-1:2005 Ed. 1
Cranes -- Tolerances for wheels and travel and traversing
tracks -- Part 1: General
TC 108 VIBRAŢII ŞI ŞOCURI MECANICE
ISO 18437-2:2005 Ed. 1
Mechanical vibration and shock -- Characterization of the
dynamic mechanical properties of visco-elastic materials --
Part 2: Resonance method (available in English only)
ISO 18437-3:2005 Ed. 1
Mechanical vibration and shock -- Characterization of the
dynamic mechanical properties of visco-elastic materials --
Part 3: Cantilever shear beam method (available in English
only)
30
ISO 7919-5:2005 Ed. 2
Mechanical vibration -- Evaluation of machine vibration by
measurements on rotating shafts -- Part 5: Machine sets in
hydraulic power generating and pumping plants
ISO 8041:2005 Ed. 2
Human response to vibration -- Measuring instrumentation
TC 127 MAŞINI DE TERASAMENT
ISO 24410:2005 Ed. 1
Earth-moving machinery -- Coupling of attachments to skid
steer loaders
TC 131 SISTEME HIDRAULICE ŞI PNEUMETICE
ISO 16030:2001/Amd 1:2005 Ed. 1
ISO 16873:2002/Amd 1:2005 Ed. 1
TC 138 ŢEVI, FITINGURI ŞI ROBINETE DE MATERIALE
PLASTICE PENTRU TRANSPORTUL FLUIDELOR
ISO 11673:2005 Ed. 1
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes --
Determination of the fracture toughness properties
TC 147 CALITATEA APEI
ISO 16240:2005 Ed. 1
Water quality -- Determination of the genotoxicity of water and
waste water -- Salmonella/microsome test (Ames test)
(available in English only)
TC 150 IMPLANTURI CHIRURGICALE
ISO 16428:2005 Ed. 1
Implants for surgery -- Test solutions and environmental
conditions for static and dynamic corrosion tests on
implantable materials and medical devices (available in
English only)
TC 159 ERGONOMIE
ISO/TS 14415:2005 Ed. 1
Ergonomics of the thermal environment -- Application of
International Standards to people with special requirements
TC 161 ARZĂTOARE CU COMBUSTIBIL GAZOS SAU
LICHID ŞI DISPOZITIVE PENTRU ARZĂTOARE
CU COMBUSTIBIL LICHID SAU GAZOS
ISO 23551-3:2005 Ed. 1
Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 3: Gas/air ratio
controls, pneumatic type
TC 171 APLICAŢII ÎN GESTIUNEA DOCUMENTELOR
ISO 4087:2005 Ed. 3
Micrographics -- Microfilming of newspapers for archival
purposes on 35 mm microfilm (available in English only)
TC 172 OPTICĂ ŞI FOTONICĂ
ISO 8600-5:2005 Ed. 1
Optics and photonics -- Medical endoscopes and endotherapy
devices -- Part 5: Determination of optical resolution of rigid
endoscopes with optics (available in English only)
ISO 8600-6:2005 Ed. 1
Optics and photonics -- Medical endoscopes and endotherapy
devices -- Part 6: Vocabulary (available in English only)
ISO 17123-5:2005 Ed. 1
Optics and optical instruments -- Field procedures for testing
geodetic and surveying instruments -- Part 5: Electronic
tacheometers (available in English only)

ISO 17123-7:2005 Ed. 1
Optics and optical instruments -- Field procedures for testing
geodetic and surveying instruments -- Part 7: Optical plumbing
instruments (available in English only)
ISO 11981:1999/Cor 1:2005 Ed. 1
TC 173 MIJLOACE TEHNICE ŞI AJUTOARE PENTRU
PERSOANE CU DEFICIENŢE SAU HANDICAP
ISO 11199-2:2005 Ed. 2
Walking aids manipulated by both arms -- Requirements and
test methods -- Part 2: Rollators
ISO/TR 13570-1:2005 Ed. 1
Wheelchairs -- Part 1: Guidelines for the application of the ISO
7176 series on wheelchairs (available in English only)
TC 190 CALITATEA SOLULUI
ISO 16720:2005 Ed. 1
Soil quality -- Pretreatment of samples by freeze-drying for
subsequent analysis
ISO 20963:2005 Ed. 1
Soil quality -- Effects of pollutants on insect larvae (Oxythyrea
funesta) -- Determination of acute toxicity
TC 192 TURBINE CU GAZ
Buletinul Standardizării – Mai 2005
ISO 19860:2005 Ed. 1
Gas turbines -- Data acquisition and trend monitoring system
requirements for gas turbine installations
TC 201 ANALIZE CHIMICE DE SUPRAFAŢĂ
ISO 24236:2005 Ed. 1
Surface chemical analysis -- Auger electron spectroscopy --
Repeatability and constancy of intensity scale
TC 205 PROIECTAREA AMBIENTULUI DIN CLĂDIRI
ISO 16484-3:2005 Ed. 1
Building automation and control systems (BACS) -- Part 3:
Functions
TC 220 RECIPIENTE CRIOGENICE
ISO 24490:2005 Ed. 1
Cryogenic vessels -- Pumps for cryogenic service (available in
English only)
TC 221 GEOSINTETICE
ISO 13426-2:2005 Ed. 1
Geotextiles and geotextile-related products -- Strength of
internal structural junctions -- Part 2: Geocomposites
31

Centrul pentru Schimb de Informaţii pentru Standarde
În prezenta rubrică sunt publicate notificările referitoare la standarde, adresate
Secretariatului OMC sub incidenţa Acordului referitor la Barierele Tehnice în Calea
Comerţului (TBT)
Totodată, rubrica răspunde şi obligaţiilor referitoare la transparenţă menţionate în
art. 2 al Acordului TBT.
Notificări referitoare la standarde primite de la secretariatul OMC
până la data de 18.05.2005
STATELE UNITE ALE AMERICII
USA/103 – Alachlor, Carbaryl, Diazinon, Disulfoton, Pirimiphos-methyl and
Vinclozolin; Proposed Tolerance Revocations
USA/107 – Safety Standards for cigarette Lighters; Advance notice of proposed
rulemaking; Request for Comments and Information
USA/108 – Protection of Stratospheric Ozone: Substitute refrigerant recycling;
Amendment to the definition of refrigerant
REPUBLICA FILIPINE
PHL/42 – Draft PNS 1314:2005 – Jewellery – Gold Jewellery including gold articles –
Marking requirements
ISRAEL
ISR/76 – Amendment to SI 1430 part 3 – Roofing sheets: polymer modified sheets
reinforced with non-woven polyester or other fibers for use by welding –
Roofing and water-proofing
ISR/77 – SI 107 part 1 – Gas-oil: gas-oil for diesel engines
ISR/78 – SI 798 –Ophthalmic optics – uncut finished spectacle lenses:
Part 1: specifications for single-vision and multifocal lenses
Part 2: Specifications for progressive power lenses
ISR/81 – Amendment to official standard SI 997 – Bandages for medical purposes
ISR/82 – Revision of SI 46 – wheat flour
ISR/82 – SI 712 part 8 – Transportable gas cylinders: identification marking for medical
gases
ISR/84 – SI 900 part 1 – Safety of household and similar electrical appliances: general
requirements
ISR/85 – Amendment to SI 323 – butter
ISR/86 – SI 4501 – non-reusable containers for the collection of sharp medical items
used in health care areas
ISR/87 – SI 1331 – small power suppliers
ISR/88 – Revision of official standard SI 926 – fruit and vegetable products preserved
with preservatives

REPUBLICA POPULARĂ CHINEZĂ
CHN/80 – Limits and measurement methods for exhaust smoke from C.I.E. and vehicles
equipped with C.I.E.
CHN/81 - Limits and measurement methods for exhaust pollutants from compression
ignition and gas fuelled positive ignition engines of vehicles
CHN/82 - Limits and measurement methods for exhaust pollutants from vehicles
equipped ignition engine under two-speed idle conditions and driving mode
conditions
CHN/83 - Limits and measurement methods for exhaust smoke emissions from
motorcycles and mopeds
CHN/84 – Limit and measurement of the voice outside accelerating three-wheeled car or
low-speed truck
CHN/85 - Limits and measurement methods for exhaust pollutants from diesel engines of
tri-wheel and low-speed goods vehicles
REPUBLICA COREA
KOR/89 – proposed amendments in safety inspection criteria of shopping carts
KOR/90 – Child-resistant packaging, 1 item, 1 safety criterion
REGATUL THAILANDA
THA/172 - TIS 330 – 2530 – Hard Tapioca pellet
REPUBLICA AFRICA DE SUD
ZAF/46 – Proposed amendment of the compulsory specification for incandescent lamps
TAIWAN
TPKM/18 – Amendments to the “Emission Standards of air pollutants for transportation”
for motorcycles
JAPONIA
JPN/143 – Draft revision of JAS for organic agricultural products and its processed foods
JPN/144 – Revision of specifications and standards for apparatus, containers/packages,
toys and detergents
STATELE UNITE MEXICANE
MEX/107 – Proyecto de norma official Mexicana PROY-NOM-157-SCFI-2002 “Equipo
de proteccion contra incendio. Extintores como dispositivo de seguridad de
uso en vehiculos de auto-transporte particular, publico y de carga en general.
Especificaciones y metodos de prueba

MAURITIUS
MUS/1 – Environmental standards for hazardous wastes regulations – 2001
TRINIDAD ŞI TOBAGO
TTO-24 – Poly (Vinyl Chloride) (PVC) Plastic drain, waste and vent pipe and fittings –
Specification (1 st revision)
Responsabil OMC / ASRO – Diana Dorobanţu
e-mail: diana.dorobantu@asro.ro; Tel/Fax: 212.99.74 (316.99.74)