Product catalogue - Fenix

More documents

Recommendations

Info

INDUSTRIAL THERMOSTATS WITH SEPARATE SENSOR <strong>Product</strong> Description Cat. No. EBERLE UTR/60 16 A, exterior/interior control, temperature range 0–60 °C, 230 V, 1 switch, IP 65. 4066037 EBERLE ITR-3 528 800 M&S KABLOREG A1d CONTROLLERS FOR GUTTERING AND OUTSIDE SURFACE HEATING Eberle EM 524 89 (one-zone) Eberle EM 524 90 (two-zone) Set of EBERLE sensors for eaves troughs Set of EBERLE ground sensors EBERLE DTR-E 3102 OJ Electronik ETR/F-1447A REGULATORS TO CONTROL ATTENUATION AND TIME PROGRAMMABLE SWITCHES FLASH Programmer 2 SED REGULATORS FOR REDUCTION OF MAIN CIRCUIT BREAKER VALUE Three-phase current-load reliever – 6 modules. BMR HJ 103 BMR HJ 306 10 A, temperature range 0–60 °C, exterior and interior control, on DIN rail, 230 V, 1 switch, IP 40. 36 4066040 Analogue digital temperature regulator; 230 V, 1×16 A switching contact, 0–50°C (0–100°C or 0–500°C can be ordered). Shows the current or set temperature. On DIN rail (3 modules). 4200044 Regulator for the heating of eaves troughs, downpipes and outdoor surfaces – pavements and drives. In contrast with a manual or thermostatic controller it enables the achievement of operating cost savings of up to 80 %. Functions: setting of temperature and humidity, operating hours counter, alarm output, delayed switching off, current temperature indicator. Placement on a DIN strip (8 modules), CZ menu. The presence of humidity (water, snow or ice) and the outdoor temperature are monitored with the help of external sensors which need to be ordered separately – for eaves troughs or free areas, depending on the application. IP 20. A two-zone regulator for the heating of eaves troughs, downpipes and outdoor surfaces. The parameters and functions are the same as for the EM 524 89. However, the regulator enables independent monitoring and control of two applications simultaneously. Basically, these are two EM 524 89 regulators in one. Both zones require the connection of their own set of sensors – for eaves troughs or free areas, depending on the application – and these need to be ordered separately. IP 20. 4600015 4600016 Humidity (ESD 524 003) and temperature (TFD 524 004) sensor for EM 524 89 and EM 524 90 regulators for controlling the heating of eaves troughs and downpipes. IP 65. 4600051 Humidity (ESF 524 001) and temperature (TFF 524 002) sensor for EM 524 89 and EM 524 90 regulators for controlling the heating of outdoor surfaces. IP 65. Differential thermostat, 230 V, 1 × switching off / 1 × switching contact 16 A, 20–35 °C, IP 65 (can be placed e.g. on the facade). While being operated it requires careful monitoring to attain economical operation. Differential thermostat; 230 V, 1 × switching contact 16 A, -15–10 °C, IP 20, on DIN rail (3 modules), room sensor (IP 44) included in the price. While being operated it requires careful monitoring to attain economical operation. This regulator uses a pilot wire for switching between comfort and attenuation temperatures. There is the option to divide a building into two zones and set individual weekly programmes for each of them. A week is divided into 7 days; each day can be allocated one of three pre-set programmes or an individual programme can be created (different for each day). In the case of individual programming, a day is divided into 30-minute intervals. There is the option of “holiday” operation – a temperature above freezing point (+7 °C) is maintained for a period of 1 to 99 days, followed by a return to the programme mode. Outputs: sinusoid 230 V / 50 Hz, positive and negative half-wave, the potential of a neutral conductor for all types of convectors and thermostats. Dimensions 83×70×17 mm, programme back-up 12 hours, IP 30 rating. Placement on KU 68. Three-level regulation with breaking for three phases, 3×3 A, current settings of 1 to 120 A with precision to 1 A. IP 20. Placement on DIN rail (6 modules). Two-level regulation with separate breaking for individual phases, 6×3 A, current settings of 1 to 120 A with precision to 1 A, size 6 modules. IP 20. Placement on DIN rail (6 modules). 4600050 4066038 4600010 4100025 4200232 4200032
STORAGE HEATERS 1 2 3 5 1 storage bricks 2 Heating elements 3 Microtherm ® insulation 4 Charge controller 5 Bypass system 6 Wall bracket 7 Charge adjustment 8 Vermiculite insulation 9 Fan 10 Auxiliary heating element (optional) 10 * available by special order 8 4 6 9 7 ECOSTATIC – Static Storage Heater Basic Characteristics and Benefi ts Manually controlled electric storage heater Input and output adjustment according to the required comfort Attractively styled to suit modern home and offi ce decor Very low lifetime maintenance Safe, easily controllable and highly reliable Upgraded and adjusted for use in bathrooms (IP X2) IP 20 rating; class I.; electromechanical thermostat for the limitation of charging + electromechanical thermostat for the control of discharging; * the WMX 706 type is without controlling thermostats; option of installation on a C or D fl ammable base; Needed clearance: side edges 75 mm, top edge 250 mm, front wall 300 mm IP X2 Type Input [kW] Max. capacity [kWh] Voltage [V] Dimensions [mm] Weight [kg] Cat. No. WMX 706 * 0.85 6 332×700×183 41 5604706 WMX 712 WMX 718 1.70 2.55 12 18 230 ~ 50Hz 560×700×183 788×700×183 77 110 5604712 5604718 WMX 724 3.40 24 1016×700×183 140 5604724 ECODYNAMIC – Dynamic Storage Heater Basic Characteristics and Benefi ts Electric fan storage heater with controllable heat output according to the Standards DIN 44574, IEC 60531 and the Safety Standard VDE 0720 Equipped with a thermomechanical charge controller (liquid fi lled) and a thermomechanical safety controller (bimetal) Airfl ow in two channels inside the core One brick type for all heater models (material: magnesite MgO) High-quality Vermiculite and Microtherm ® insulation (achieving lower surface temperatures and better heat accumulation) Only 25 cm deep No start-up procedure; may be operated by user immediately after installation Tube heating elements (special alloy steel) Radial fl ow fan for quiet and steady heat output Discharge controlled with an external room thermostat* Air outlet with bimetal fl ap system for high and constant heat output (automatic) Auxiliary heating element* installed in the air outlet area Sheet steel casing, phosphatized and enameled; colour: creme-white with gray-brown air outlet grill With a wall spacer and either supporting feet* or a fl oor plate* Protective cover* for bathrooms IP 20 rating; class I.; electromechanical thermostat for the limitation of charging; option of installation on a C or D fl ammable base; Needed clearance: side and top edge 100 mm, front wall 300 mm IP X0 Type Input [kW] Max. capacity [kWh] Voltage [V] Dimensions [mm] Weight [kg] Cat. No. VFMi 20 VFMi 30 VFMi 40 2.0 3.0 4.0 16 24 32 factory setting 400–3N ~ 50Hz may be changed 626×672×250 776×672×250 926×672×250 98 137 176 5604020 5604030 5604040 VFMi 50 VFMi 60 VFMi 70 5.0 6.0 7.0 40 48 56 by a qualifi ed technician to 230 ~ 50Hz 1076×672×250 1226×672×250 1376×672×250 215 254 293 5604050 5604060 5604070 37
Page 1 and 2: Product catalogue October 2012
Page 3 and 4: ECOSUN - radiant heating panels low
Page 5 and 6: LOW TEMPERATURE PANELS ECOSUN G - a
Page 7 and 8: RADIANT PANELS MR - marble radiant
Page 9 and 10: SUPPORTS FOR GR PANELS - for applic
Page 11 and 12: IRC RADIANT PANELS - FENIX has manu
Page 13 and 14: Overview of special ECOFLOOR heatin
Page 15 and 16: ECOFLOOR HEATING MATS LDTS or LSDTS
Page 17 and 18: KITS FOR DO-IT-YOURSELF INSTALLATIO
Page 19 and 20: ADSV+ heating cable, a two-conducto
Page 21 and 22: MAPSV heating cable, a single-condu
Page 23 and 24: ADSV+ heating cable, a two-conducto
Page 25 and 26: ECOFLOOR ACCESSORIES F-BOARD FLOOR
Page 27 and 28: ECOFILM F - underfl oor heating fi
Page 29 and 30: ECOFILM MHF - mirror fogging preven
Page 31 and 32: ULTRATHERM RADIANT PANELS ULTRATHER
Page 33 and 34: ATLANTIC F 117 - electric convector
Page 35: ANALOG ROOM THERMOSTAT Product Desc
Page 39 and 40: Argentina Armenia Australia Austria

Product catalogue - Fenix

Create successful ePaper yourself

Delete template?

Save as template?