Wheel section - Mid-Usa Canada
Wheel section - Mid-Usa Canada
Wheel section - Mid-Usa Canada
- TAGS
- wheel
- section
- canada
- mid-usa.ca
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Caliper Related<br />
Brake Caliper piston asseMBlies<br />
for Big twin and sportster<br />
Top quality reproductions of the OE Brake Caliper Piston Assemblies. Available as front or<br />
rear piston to fit models as listed. See 5-36 for caliper seal kits, 5-48/50 for pads. Don't forget<br />
to order 05503 brake fluid.<br />
Front Brake Caliper Pistons<br />
Part<br />
58746<br />
4 speed FL models<br />
1972/Early 1980 FX<br />
and Sportster 1973<br />
(Rpls. HD 44109-72A)<br />
Part<br />
58748<br />
Rear Brake Caliper Piston<br />
FX and Sportster 1974/1977<br />
(Rpls. HD 44275-74)<br />
Part<br />
58745<br />
FL and FX 1973/Early 1980<br />
(Rpls HD 44129-73)<br />
front Caliper Brake pad pin for fx & sportster<br />
• Supports the brake pads on dual disc models.<br />
• Sold as pack of 4.<br />
• Rpls. HD 44162-77.<br />
Model & Year Part #<br />
FX 1978/1983, FXS 1977/1979 58302<br />
& Sportster 1979/1983<br />
oVersiZe Caliper Mounting pin reBuild kit<br />
for Big twin & sportster<br />
Part<br />
57619<br />
This kit replaces stock mounting pin 44107-72 on Banana style brake calipers. Use by boring<br />
caliper holes oversize. This will give longer life of caliper housing before replacement. Fits FL,<br />
FX & Sportster 1972/Early 1980.<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
heaVy duty Caliper<br />
staBiliZer for Big twin<br />
Part<br />
57615<br />
Here’s some smart bolt-on protection for<br />
your 74ci or 80ci Harley-Davidson ® with the<br />
stock banana style rear brake caliper, rear<br />
disc brake. This bracket will give your ride<br />
more miles with less hassles. 3/16" thick<br />
bracket replaces your bent rear axle flat<br />
washer and puts even pressure on the<br />
swingarm to keep the right rear axle<br />
adjuster from jamming. Approximately 26<br />
lbs. of spring pressure on the caliper keeps<br />
it from bouncing, even on the big bumps.<br />
Nylon insert in the spring insures minimum<br />
wear on the caliper. Reduces rear disc<br />
brake pin and bushing failure. Fits Big Twin<br />
1973/1980. (Rpls. HD 94904-84T)<br />
Caliper Mount Bushing<br />
set for fx and sportster<br />
Part<br />
58337<br />
Fits FX, FXR and Sportster forks<br />
1977/1984, FXWG 1980/1983<br />
(Rpls. HD 46018-77, 46019-77)<br />
Take unwanted noise and slop out of your<br />
front brake with these hardened steel brake<br />
caliper mount bushings. Sold in sets of 2.<br />
5-37
Change language