Wheel section - Mid-Usa Canada
Wheel section - Mid-Usa Canada
Wheel section - Mid-Usa Canada
- TAGS
- wheel
- section
- canada
- mid-usa.ca
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5-36<br />
Caliper Related<br />
Brake Caliper insert CoVers for Big twin & sportster<br />
front Brake Caliper Mounting hardware<br />
for Big twin & sportster<br />
Parts included<br />
• Die cast.<br />
• Fits the center of OEM style brake calipers.<br />
• Secured with double faced adhesive tape.<br />
• Available in two sizes.<br />
Fits o.D. Part #<br />
Softail and Sportster Late 1987/1999 with Hayes type rear caliper. 1.80" 58332<br />
Softail, FX, FXR and Sportster 1982/Early 1987 with Girling type rear 1.47" 58333<br />
caliper, and front caliper all models 1984/1999 (except 1984 banana style).<br />
Also fits the front caliper on all Springer models.<br />
Note: Dual disc models requires 2 sets.<br />
Model & Year Notes Part #<br />
Big Twin 1984/1992 (except FL 4 speed & FXSTS), .185" thick washer 58391<br />
XR 1000 1983, Sportster 1984/1992<br />
Big Twin & Sportster 1993/1999 (except FXSTS & FLSTS) .092" thick washer 58390<br />
rear Caliper<br />
hardware kit<br />
for Big twin & sportster<br />
Part<br />
58304<br />
Fits FL models 1986/1999<br />
& All models Late 1987/1999<br />
If wear and tear has taken its toll or you just<br />
want to improve the appearance of your rear<br />
caliper, this Hardware Kit will do the job.<br />
Includes two Torx type caliper mounting pins<br />
(Rpls. HD 44039-86) & one bleeder screw<br />
valve (Rpls. HD 44146-77).<br />
Brake Caliper<br />
insert CoVer<br />
for Big twin & sportster<br />
Part<br />
58314<br />
Fits all models 2000/Later Front<br />
& Rear (except Springer Front)<br />
(Rpls. HD 44477-99)<br />
Made from steel for lasting beauty, this<br />
Brake Caliper Insert Cover installs in<br />
seconds with included double stick tape.<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
Caliper and Mount reBuild<br />
kit for early Models<br />
• Save that worn out banana style caliper and<br />
replace those sloppy bushings with this kit.<br />
• Includes brake pad pins, caliper<br />
mounting bushings, mounting stud,<br />
locknut and washers.<br />
Description Part #<br />
Complete Caliper and Mount 57611<br />
Rebuild Kit (Rpls. HD 44331-73)<br />
Pins only. Sold in pack of 2 57633<br />
(Rpls. HD 44124-72)<br />
Long Bushing only. Sold each 57602<br />
(Rpls. HD 45821-75)<br />
Short Bushing only. Sold each 57605<br />
(Rpls. HD 45822-75)<br />
Brake Caliper<br />
hardware kit<br />
for Big twin & sportster<br />
Part<br />
58310<br />
Complete Kit Shown<br />
Fits FL 1972/1984 &<br />
FX, Sportster 1973 only<br />
(Rpls. HD 44331-73)<br />
Fits Big Twin 2000/Later<br />
(except Springer front)<br />
& Sportster 2000/2003<br />
(Rpls. HD 44473-02A)<br />
• Provides a great finishing touch to front or<br />
rear caliper.<br />
• Includes 6 point mounting bolts, 12 point<br />
brake pad support pins, and bleeder<br />
screw.
Caliper Related<br />
Brake Caliper piston asseMBlies<br />
for Big twin and sportster<br />
Top quality reproductions of the OE Brake Caliper Piston Assemblies. Available as front or<br />
rear piston to fit models as listed. See 5-36 for caliper seal kits, 5-48/50 for pads. Don't forget<br />
to order 05503 brake fluid.<br />
Front Brake Caliper Pistons<br />
Part<br />
58746<br />
4 speed FL models<br />
1972/Early 1980 FX<br />
and Sportster 1973<br />
(Rpls. HD 44109-72A)<br />
Part<br />
58748<br />
Rear Brake Caliper Piston<br />
FX and Sportster 1974/1977<br />
(Rpls. HD 44275-74)<br />
Part<br />
58745<br />
FL and FX 1973/Early 1980<br />
(Rpls HD 44129-73)<br />
front Caliper Brake pad pin for fx & sportster<br />
• Supports the brake pads on dual disc models.<br />
• Sold as pack of 4.<br />
• Rpls. HD 44162-77.<br />
Model & Year Part #<br />
FX 1978/1983, FXS 1977/1979 58302<br />
& Sportster 1979/1983<br />
oVersiZe Caliper Mounting pin reBuild kit<br />
for Big twin & sportster<br />
Part<br />
57619<br />
This kit replaces stock mounting pin 44107-72 on Banana style brake calipers. Use by boring<br />
caliper holes oversize. This will give longer life of caliper housing before replacement. Fits FL,<br />
FX & Sportster 1972/Early 1980.<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
heaVy duty Caliper<br />
staBiliZer for Big twin<br />
Part<br />
57615<br />
Here’s some smart bolt-on protection for<br />
your 74ci or 80ci Harley-Davidson ® with the<br />
stock banana style rear brake caliper, rear<br />
disc brake. This bracket will give your ride<br />
more miles with less hassles. 3/16" thick<br />
bracket replaces your bent rear axle flat<br />
washer and puts even pressure on the<br />
swingarm to keep the right rear axle<br />
adjuster from jamming. Approximately 26<br />
lbs. of spring pressure on the caliper keeps<br />
it from bouncing, even on the big bumps.<br />
Nylon insert in the spring insures minimum<br />
wear on the caliper. Reduces rear disc<br />
brake pin and bushing failure. Fits Big Twin<br />
1973/1980. (Rpls. HD 94904-84T)<br />
Caliper Mount Bushing<br />
set for fx and sportster<br />
Part<br />
58337<br />
Fits FX, FXR and Sportster forks<br />
1977/1984, FXWG 1980/1983<br />
(Rpls. HD 46018-77, 46019-77)<br />
Take unwanted noise and slop out of your<br />
front brake with these hardened steel brake<br />
caliper mount bushings. Sold in sets of 2.<br />
5-37
5-38<br />
Calipers & Mounts<br />
retro fit Brake Calipers for softail<br />
Part<br />
58775<br />
• Retro fit your Softail with Late Model 4<br />
Piston caliper Assemblies.<br />
Fits Softail 1984/1999<br />
oe style rear Caliper Mount<br />
for Big twin<br />
Fits Softail Late 1987/1999<br />
(Rpls. HD 44207-87)<br />
• This cast aluminum mount is designed as a direct OE replacement.<br />
• Use with your existing Kelsey Hayes brake caliper or our 58786.<br />
• Includes caliper mounting bolt bushings and rubber swingarm<br />
bumper.<br />
Caliper Mounting BraCket and support arM for rigid fraMes<br />
• Bracket and Support Arm used on rigid frames with banana style caliper. Designed to mount caliper in a more vertical<br />
position helping reduce wear and tear on the mounting pins and creating clearance for the fender support.<br />
Part<br />
58322<br />
Part<br />
58389<br />
Caliper Mounting Bracket<br />
Part<br />
58776<br />
Front Rear<br />
• Adds great looks with the advantage of<br />
added stopping power.<br />
• Includes brake pads.<br />
rear Brake Caliper Mount for Big twin<br />
• Used to mount the banana style calipers on FL & FX models<br />
1973/1980.<br />
• Complete with bushings.<br />
• (Rpls. HD 44166-73)<br />
Part<br />
58323<br />
Part<br />
57700<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
oe style rear Brake Caliper<br />
for softail<br />
Part<br />
58734<br />
Fits FLST 2000/2007 &<br />
FXST 2000/2005 (except Duece)<br />
(Rpls. HD 44016-00)<br />
• Direct replacement for the factory 4 piston unit.<br />
• Eliminates the long down time if your original caliper<br />
was at the chrome shop.<br />
• Includes sintered metal brake pads that are<br />
compatible with most types of brake discs.<br />
Part<br />
58380<br />
Caliper Bracket Support Arm for<br />
58322 bracket. Mounting holes<br />
8" center to center.
58351<br />
58750<br />
58767<br />
Calipers<br />
rear oe style Brake kits for 2000/later Models<br />
58350<br />
59160<br />
58759<br />
• Direct replacement calipers and brackets for models listed.<br />
• Eliminates long down time if your original pieces are at the chrome<br />
shop.<br />
58734<br />
58737 58747<br />
• Includes sintered metal brake pads that are compatible with most<br />
brake discs.<br />
Fitment Description Rpls. HD Part #<br />
FXST 2000/2005 & Caliper/Bracket Assembly 44016-00 58734<br />
FLST 2000/2007<br />
(except Duece)<br />
Softail 2006/2007 Caliper Bracket 42895-06 58737<br />
Softail 2006/2007 Brake Caliper 40908-06 58747<br />
Softail 2008/Later Caliper Bracket 42895-08 58351<br />
Softail 2008/Later Brake Caliper 40908-08 59162<br />
FLT models 2002/2007 Caliper/Bracket Assembly 44080-02 58750<br />
FLT models 2008/Later Caliper Bracket 44089-08 58350<br />
FLT models 2008/Later Brake Caliper 44080-08 59160<br />
Dyna models 2000/2005 Caliper/Bracket Assembly 44017-00 58759<br />
Dyna models 2006/2007 Caliper/Bracket Assembly 44017-06 58751<br />
Dyna models 2008/Later Caliper Bracket 42062-08 58352<br />
Dyna models 2008/Later Brake Caliper 40908-08 59162<br />
Sportster 2000/2003 Caliper/Bracket Assembly 40925-00 58767<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
58751<br />
59162<br />
5-39
5-40<br />
Part<br />
58754<br />
Chrome<br />
Set<br />
Calipers<br />
front disC Brake Calipers for Big twin & sportster<br />
58724<br />
front disC Brake Calipers for Big twin & sportster<br />
Dual Disc<br />
Fits all dual disc models<br />
1984/1999 & XR 1000 1983<br />
Part<br />
58753<br />
Chrome<br />
Each<br />
Single Disc<br />
Fits all single disc models<br />
1984/1999<br />
Note: Will not fit Springer & FL 4 speed<br />
Finally here are reliable OE style Disc Brake Caliper Assemblies for single or dual disc applications. These calipers add a personal touch to<br />
your motorcycle and include semi-metallic brake pads. Fits 11 1/2" brake discs.<br />
single piston rear Caliper asseMBly<br />
for Big twin<br />
58760<br />
• Sold completely assembled with all internal components.<br />
• Includes brake pads and pins, mounting hardware and instructions.<br />
Model & Year Rpls. HD Finish Part #<br />
FX 1973/1982, 44008-80 & Chrome 58760<br />
FXE 1983 & 44106-80 Black 59150<br />
FL 1973/1980<br />
FX & FL 1981/1982 44011-81 Chrome 59157<br />
Softail & FXR 44050-82A Chrome 59155<br />
1982/1986<br />
Sportster 44024-79 Chrome 59152<br />
1979/1981<br />
Sportster 44052-82A Chrome 59156<br />
1982/1986<br />
58373<br />
• Calipers are complete with all internal parts, brake pins, disc pads and bleeder valve.<br />
• Sold as a set for models with dual disc front brakes.<br />
Model & Year Description Finish Rpls. HD Part #<br />
FX and Sportster models 1973/1977 Brake Caliper - (Single disc) Chrome 44089-74 59151<br />
FX and Sportster models 1977/1983 Brake Caliper - (Dual disc) Chrome 44121-77 & 44195-77 58724<br />
Caliper Mounting Bolt and Nut Set FX and Sportster models Chrome 44174-77, 58373<br />
1977/1983 44173-77 &<br />
with dual disc front brakes 7740<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
Part<br />
59154<br />
Black<br />
Each<br />
rear Brake Caliper for Big twin<br />
Part<br />
58786<br />
Chrome<br />
59151<br />
Part<br />
59153<br />
Black<br />
Fits all Big Twin<br />
Late 1987/1999<br />
(Rpls. HD 44050-87)<br />
• Designed as a direct replacement for the OE rear caliper but<br />
with smoother flowing lines.<br />
• Includes • Designed piston as and a seals. direct replacement for the OE rear caliper but<br />
with smoother flowing lines.<br />
• Includes piston and seals.
Calipers & Caliper/Brake Kit<br />
• Direct replacement for the 4 piston type factory units.<br />
• Eliminates the long down time if your original caliper was at the<br />
chrome shop.<br />
• Includes sintered metal brake pads that are compatible with most<br />
types of brake discs.<br />
• Use with your original mounting hardware.<br />
Part<br />
59923<br />
58733<br />
oe style front Brake Calipers for 2000/later Models<br />
58728<br />
59161<br />
two piston rear Caliper kits for Big twin<br />
Softail Late 1987/1999 High Caliper<br />
Location (above rear fork)<br />
Part<br />
59925<br />
Dual<br />
Piston<br />
Part<br />
59933<br />
Softail Late 1987/1999 Low Caliper<br />
Location (level with axle)<br />
Part<br />
59929<br />
FXR Late 1987/1994 Dyna 1991/1999<br />
Upgrade your stopping power while improving the looks of your rear brakes at the same time<br />
with one of our HARDBODY Two Piston Caliper and Mount Kits. They are streamlined yet<br />
very effective. CNC machined from 6061 certified aluminum billet, then heat treated to T6<br />
specifications, these kits feature dual stainless steel pistons and include flush mounted<br />
stainless steel mounting hardware. The brake calipers include brake pads and are designed<br />
to be used with 10mm brake line banjo bolts. All mounting brackets include adjustable brake<br />
stops for a perfect fit. See 5-46 for matching front brake kits.<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
2 Piston Caliper for Big Twin 58729<br />
Brake Pad Set, V-Factor 58070<br />
Brake Pad Set, SBS 58063<br />
Caliper Rebuild O Ring Kit 58377<br />
59159<br />
Model & Year Description Rpls. HD Part #<br />
All Big Twin & Sportster Left Front Caliper 44046-00 58733<br />
2000/2007 Right Front Caliper 44023-00C 58728<br />
Softail & Dyna Left Front Caliper 44046-08 59161<br />
2008/Later<br />
FLT 2008/Later Left Front Caliper 43027-08 59159<br />
Right Front Caliper 44023-08 59158<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
59158<br />
driVe side Brake kit for<br />
CustoM use<br />
Part<br />
58798<br />
Fits Hardbody Wide Tire<br />
Applications<br />
• High tech brake kit with four piston caliper<br />
for left or right side drive frames.<br />
• Use with either belt pulley or chain<br />
sprocket.<br />
• Includes 11 1/2" stainless steel brake rotor.<br />
• Brake anchor tab (not included) must be<br />
welded to frame.<br />
• Designed for rigid or softail type <strong>section</strong>s.<br />
• Use with Hardbody wide wheel<br />
assemblies.<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
Brake Pads 58091<br />
5-41
Model & Year Part #<br />
All models 1984/1999 (except Springer & FL 4 speed) 58755<br />
All Models 2000/Later (except Springer) 58756<br />
5-42<br />
58700<br />
Front & Rear Caliper Kits<br />
2 piston rear Brake Caliper kits for Big twin and sportster<br />
58704<br />
58722<br />
58790<br />
58752<br />
58787<br />
These custom Rear 2 Piston Calipers with Hanger Brackets and complete Hardware Kits are designed to replace old, worn-out calipers and<br />
brackets. GMA calipers are machined from billet aluminum, clear anodized and feature dual pistons for the best braking possible. The hanger<br />
brackets are blanchard ground to specifications and carefully machined. Kits fit below applications.<br />
Note: A 5/8" bore master cylinder must be used with these disc brake systems.<br />
RePLACeMeNT PARTS<br />
SBS V-Factor<br />
Clear Brake Brake<br />
Model & Year Anodized Black Chrome Pads Pads<br />
Big Twin 4 speed 1973/1980 with 10" 58700 58701 58702 58062 —<br />
Rotor and Banana Bracket<br />
Big Twin 4 speed 1981/1984 with 11 1/2" 58703 58704 58705 58062 —<br />
Rotor and “Y” Bracket (except Softail)<br />
Rigid Frame with 10" Rotor 58712 58713 58714 58062 —<br />
All Softail models and FXWG 58738 58739 58740 58063 58070<br />
1984/1986<br />
Softail models 1987/1999 58741 58742 58743 58063 58070<br />
FXR 1985/1999 58706 58707 58708 58062 —<br />
FLH & FLT models 1986/1999 58789 58790 58794 58062 —<br />
Sportster 1979/1981 58721 58722 58744 58063 58070<br />
Sportster 1982/Early 1987 58749 58752 58768 58063 58070<br />
Sportster Late 1987/1999 58785 58787 58788 58063 58070<br />
4 piston front Brake Caliper kits<br />
for Big twin & sportster<br />
1984/1999<br />
58742<br />
2000/Later<br />
58708<br />
58714<br />
4 piston rear Brake Caliper kits<br />
for Big twin<br />
Softail<br />
1987/1999<br />
Model & Year Complete Caliper Kit Replacement Pads<br />
Softail 1987/1999 58757 58053<br />
Softail 2000/Later 58758 -----<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
58739<br />
These custom Four Piston Rear Calipers with mounting brackets,<br />
spacers and hardware are designed to replace OE brake systems<br />
for a custom look while providing optimum stopping power.<br />
Features include chrome plated or clear anodized finish (to help<br />
prevent oxidation), high friction brake pads and CNC machined<br />
billet aluminum.
Dyna<br />
Front & Rear Caliper Kits<br />
2 piston front Brake Caliper systeM kits for Big twin and sportster<br />
58711 58730 58726 58716 58720<br />
• These custom Two Piston Front Calipers with hanger brackets, spacers and mounting hardware are designed to easily replace the OE<br />
system giving your motorcycle that clean custom look with optimum stopping power.<br />
• Features include; calipers machined from billet aluminum, clear anodized coating to help prevent oxidation and high friction organic brake<br />
pads.<br />
Note: The master cylinder needs to be the correct internal size bore diameter for 100% braking efficiency. All GMA single disc<br />
applications using a 2 piston caliper require a 5/8" bore master cylinder. All front dual disc applications using a 2 piston<br />
caliper may use the factory 11/16" bore found on 1984/Later models, or a 3/4" bore handlebar master cylinder. Replacement<br />
brake pads are sold for one caliper only.<br />
RePLACeMeNT PARTS<br />
SBS V-Factor<br />
Clear Brake Brake<br />
Model & Year Anodized Black Chrome Pads Pads<br />
FL 4 speed 1973/1984 58709 58710 58711 58062 —<br />
FXSTS Springer Softail 1988/Later & most Custom Springers 58727 58730 58731 58063 58070<br />
Paughco Wide Springer 58723 58725 58726 58063 58070<br />
FX and Sportster 1974/1977 Single Disc 19” wheel only 58715 58716 58717 58063 58070<br />
All Single Disc models 1984/1999 58718 58719 58720 58063 58070<br />
4 piston Billet rear Brake Caliper kits<br />
for Big twin & sportster<br />
Softail<br />
Low Caliper<br />
Location<br />
Today’s high powered motorcycles require better brakes than what were designed by the<br />
factory back in the late 1980’s. Unlike the OE style floating caliper that uses only one piston,<br />
these solid mount type calipers feature four pistons and will provide the precision braking<br />
power your bike requires. The calipers and mounts are CNC machined from 6061 certified<br />
billet aluminum and heat treated to T6 specifications. For long life the pistons are made from<br />
stainless steel and are multi-proportionally sized to help promote even brake pad wear. All<br />
calipers include brake pads and are designed to be used with a 10mm brake line banjo bolt.<br />
For best results and brake pedal feel, we recommend using a 5/8" bore master cylinder with<br />
these caliper kits. See 5-47 for matching front brake caliper kits.<br />
FXR<br />
Model and Year Part #<br />
Softail Late 1987/1999 High Caliper Location (above rear fork) 59711<br />
Softail Late 1987/1999 Low Caliper Location (level with axle) 59708<br />
FXR Late 1987/1994 59715<br />
Dyna 1991/1999 59719<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
Caliper for Big Twin 58793<br />
Brake Pad set, SBS 58058<br />
Caliper Rebuild Kit 58378<br />
Softail<br />
High Caliper<br />
Location<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
rear Caliper BraCket for<br />
CustoM use<br />
Part<br />
58303<br />
Fits Softail Models<br />
Late 1987/1999<br />
• CNC machined from 6061-T6 billet<br />
aluminum.<br />
• Below rear fork rail low caliper mounting<br />
position.<br />
• Use with calipers with 3 1/2” mounting<br />
bolt spacing.<br />
5-43
5-44<br />
Front & Rear Caliper Kits<br />
dual piston Brake Calipers for Most Models<br />
• CNC machined 6061-T6 billet aluminum,<br />
designed to eliminate flex.<br />
• Anodized aluminum piston.<br />
• Centerless ground for exacting tolerences.<br />
• Quad seal for smooth action.<br />
Part<br />
59130<br />
Black<br />
• Light and compact.<br />
• Front or rear applications.<br />
• Requires separate caliper bracket.<br />
• Available in chrome or black anodized.<br />
FRoNT CALIPeR BRACKeTS<br />
Model Year Finish Left Part # Right Part #<br />
Wide Glide or Narrow Glide 1984/1999 Black 59132 59132<br />
Chrome 59133 59133<br />
Wide Glide or Narrow Glide 2000/2005 Black 59136 59134<br />
Chrome 59137 59135<br />
Springer 1988/Later Black 59144 59145<br />
Chrome 59142 59143<br />
ReAR CALIPeR BRACKeTS<br />
Model Year Finish Part #<br />
Softail 1984/1999 Black 59138<br />
Chrome 59139<br />
Softail 2000/Later Black 59140<br />
Chrome 59141<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
Pads for Dual Piston Calipers 58094<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
Part<br />
59131<br />
Chrome
Front Caliper Brackets<br />
four piston Brake Caliper and. BraCkets for Big twin & sportster<br />
• Made in the USA 4 piston calipers are of the highest quality<br />
available. The pistons are hard anodized aluminum for superior<br />
operation and long life.<br />
Part<br />
58761<br />
Polished<br />
4-Piston Caliper<br />
Part<br />
58769<br />
Polished<br />
Part<br />
58762<br />
Chrome<br />
Part<br />
58770<br />
Chrome<br />
Rear Caliper Bracket for FXR 1982/1999<br />
Part<br />
58777<br />
Polished<br />
Part<br />
58778<br />
Chrome<br />
Rear Caliper Bracket for Softail 2000/Later<br />
Part<br />
58763<br />
Polished<br />
• Brake pad springs eliminate rattles and aid in caliper installation.<br />
• Brackets are available for specific applications.<br />
Part<br />
58764<br />
Chrome<br />
Front Caliper Bracket for all models<br />
1984/1999 (except Springer)<br />
Part<br />
58771<br />
Polished<br />
Part<br />
58772<br />
Chrome<br />
Rear Caliper Bracket for Dyna Models<br />
1991/1999<br />
Part<br />
58779<br />
Polished<br />
Part<br />
58780<br />
Chrome<br />
Rear Caliper Bracket for Rigid Models<br />
with 11 1/2” Brake Rotor<br />
Front Caliper Bracket for Springer Models<br />
Fits right or left side<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
Caliper Rebuild Kit 58791<br />
Caliper Shim Kit 58792<br />
Replacement Brake Pads 58091<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
Part<br />
58765<br />
Polished<br />
Part<br />
58766<br />
Chrome<br />
Rear Caliper Bracket for Softail 1987/1999<br />
Part<br />
58784<br />
Chrome<br />
Part<br />
58773<br />
Polished<br />
Part<br />
58774<br />
Chrome<br />
Front Caliper Bracket for all models<br />
2000/Later<br />
Part<br />
58781<br />
Polished<br />
Part<br />
58782<br />
Chrome<br />
Left Rear Caliper Bracket<br />
for Right Side Drive<br />
5-45
5-46<br />
Front Caliper Kits & Brake Fluids<br />
Billet front Brake Caliper asseMBlies for Big twin and sportster<br />
Part<br />
58732<br />
Left only<br />
Dual Piston<br />
Part<br />
58729<br />
Right only<br />
Part<br />
59726<br />
Pair<br />
Inside view of caliper Fits Big Twin or Sportster models 1984/1999<br />
with 11 1/2" O.D. brake discs<br />
Outside view of caliper<br />
Sure the original equipment single piston floating mount type front brake caliper(s) on your bike will stop it, but when it comes time for a panic<br />
stop, good brakes are a must and every extra inch of stopping power is necessary. Not only do these Front Brake Caliper Assemblies work<br />
extremely well, they are lightweight and look great. These dual piston solid mount type calipers are CNC machined from 6061 certified<br />
aluminum billet and heat treated to T6 specifications. They feature stainless steel pistons and include brake pads, bleeder screws and chrome<br />
plated button head mounting hardware. Alignment shims and installation instructions are also included. Each caliper is drilled and tapped for<br />
a 10mm brake line banjo bolt. See 5-42 for matching rear brake kits.<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
SBS Brakes Pads, Pair 58054<br />
V-Factor Brake Pads, Pair 58070<br />
Caliper Rebuild O Ring Kit 58377<br />
Part<br />
05503<br />
dot 5 Brake fluid<br />
for all Models<br />
This POWER HOUSE long life DOT 5 Silicone Brake<br />
Fluid is specifically developed for severe service and<br />
competition applications. Complies with Federal Motor<br />
Safety Standards and will not boil at temperatures up to<br />
500˚F. This brake fluid will not absorb condensation or<br />
moisture like DOT 3 is prone to. Available in 12 oz.<br />
bottles (355 ml). Sold each.<br />
NoT SHIPPABLe BY AIR<br />
Note: Will not fit Springer models.<br />
dot 4 Brake fluid<br />
for late Models<br />
Part<br />
05505<br />
• Formulated for use in all touring models 2005/Later and Dyna, Softail & V-Rod<br />
models 2006/Later. Also used on all Sportster models 2007/Later.<br />
• Minimum wet boiling point of 311˚F (155 C).<br />
• 12 fluid ounce (355ML) plastic bottle.<br />
• Sold each.<br />
NoT SHIPPABLe BY AIR<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts
Front Caliper Kits & Brake Quiet Stick<br />
4 piston Billet front Brake Caliper asseMBlies for Big twin and sportster<br />
Designed for maximum strength, dependability, lightweight and aesthetic appeal, these solid<br />
mount type calipers are made to replace the OE style brakes. To help eliminate any caliper<br />
flex under extreme pressure, Excel Components uses 6061 certified aluminum billet heat<br />
treated to T6 specifications and CNC machines all components for exact repeatability. All<br />
unnecessary material is carved away providing its unique style and lightweight. The<br />
stainless steel pistons are multi-proportionally sized to help promote even brake pad wear.<br />
All calipers include brake pads, bleeder screw and button head style mounting hardware<br />
with alignment shims. For best results a 5/8" bore master cylinder is recommended for single<br />
disc applications and a 3/4" bore master cylinder is recommended for dual disc applications.<br />
See 5-43 for matching rear brake kits.<br />
4 piston front Brake Caliper kits<br />
for Big twin and sportster<br />
• 4 stainless steel 1 1/16" O.D. pistons provide superior stopping<br />
power.<br />
• Caliper is CNC machined from 6061-T6 billet aluminum.<br />
• Top access for easy brake pad inspection & replacement.<br />
• Includes semi-metallic brake pads, 10mm banjo bolt with sealing<br />
washers, bleeder screw and mounting hardware.<br />
• Designed for use with 11 1/2" brake disc.<br />
• See page 5-43 for matching Softail rear brake caliper.<br />
• Note: Will not fit Narrow Glide front forks with 19" wire spoke<br />
wheel.<br />
Model & Year Right Pair<br />
Big Twin & Sportster 58736 59901<br />
with 11 1/2" disc 1984/1999<br />
(Except Springer)<br />
<strong>Wheel</strong> <strong>section</strong><br />
RED PARt numbERs inDicAtE nEw PARts<br />
Fits all Big Twin and Sportster<br />
models 1984/1999<br />
(except Springer & FLH 1984)<br />
Description Part #<br />
Left only 58795<br />
Right only 58793<br />
Dual disc (pair) 59727<br />
RePLACeMeNT PARTS<br />
Description Part #<br />
Brake Pad Set, SBS 58058<br />
Caliper Rebuild Kit 58378<br />
disC Brake quiet stiCk<br />
Part<br />
05075<br />
• Eliminates brake noise, squeaking, and dampens vibrations of disc<br />
brake pads.<br />
• Wax like stick creates a water-resistant high temperature film<br />
without making a mess.<br />
• Brake Quiet can be used on disc brake caliper pins, slides,<br />
bushings, pistions, and rubber sleeves.<br />
• Sold each as a 9 gram stick.<br />
5-47