ThermArc Cat sec01 -INTRO 7/03 - Comercial Unisol SA

Recommendations

Info

WIRE FEEDERS ULTRAFEED ® 4000 PROCESS MIG FLUX CORED PULSE MIG Part Number 100055-001 Feed Rolls The Ultrafeed ® 4000 is a heavy duty yet compact, constant speed 4-roll wire feeder designed for semi-automatic welding. Key features are outstanding speed control through built-in compensation for changes in line voltage and/or load on the feed rolls and the ability to upgrade the standard unit with easy plug in options. Other user friendly features include quick change feed rolls without tools, a rotatable feed head to limit the bends in the gun cable and a welding gun quick disconnect. The standard unit comes with an inch switch, purge switch, gun trigger hold, remote voltage control and the ability to adjust the run in speed and ramp up to match the power source start characteristics. Ground fault protection, electronic motor protection and an input circuit breaker are all designed to keep the unit running in tough conditions. The feed system is compact yet provides heavy duty power for large diameter solid and flux cored wires. Option kits that can be field fitted to the standard unit are: • Ultrafeed ® 4000 Timer Kit, allows adjustable timing on preflow, post flow, burnback and spot time. • Ultrafeed ® 4000 Dual Schedule Kit, provides a second schedule for wire speed and voltage • Ultrafeed ® 4000 Digital Meter Kit, provides digital meters for wire speed, voltage (preset and actual), arc current and a feed force monitor. Includes a field installable tachometer. • Ultrafeed ® 4000 Advanced Interface Kit – interface for automation through a 19 pin connector for stop/start, schedule select, inch, purge inputs; Arc, standby and fault outputs; 0-10 VDC analog inputs for wire speed and voltage control; includes a RS 232 Serial port for communication to a PC and a CAN port for communication with other select Thermal Arc ® power sources. FEATURES • Electronic Speed Control and Dynamic Breaking Excellent Speed Control and Compensation for Variation in Line Voltage and Load • Remote Voltage Control Adjust the Power Source Output at the Feeder • Quick Change Feed Rolls Change the Feed Rolls without Tools • Geared Top and Bottom Feed Rolls Superior Traction on the Wire • Gun Trigger Hold Allows Gun Trigger to be Latched • Rotatable Feed Head Allows the Wire Path to be Straight for Better Feeding ACCESSORIES 34 THERMAL ARC www.thermalarc.com 4 Wire Speed Range 50 - 875 (IPM) 1.25 - 22.1 (m/min.) Wire Size Range .024” - 1/8” O.6 - 3.2 (mm) • Run in Speed Adjustment Adjust the Run in Speed for Different Wire Types and Improve Starting • Weld Gun Quick Disconnect • Ground Fault and Electronic Motor Protection Protects Electronics from Damage and the Motor from Overload • Easy Fit Options Upgrade with Option Kits, Easily Field Fitted • Control Cable and Feed Roll Kit Standard Ready to Weld, Nothing Extra to Order Control Cable Extensions, Cable Adapters, Spool Adapter, Spool Cover, Wire Reel Kit, Feeder Cart, Swivel Base Dimensions (H x W x D) 12.2” x 13.2” x 20.2” 310 x 335 x 513 (mm) Ultrafeed ® 4000 Data Sheet #84-2201 APPROVALS C<strong>SA</strong>, IEC 974-1, NEMA Net Weight 47 lbs. (12.7 kg)
HMC-410 PROCESS MIG FLUX CORED PULSE MIG Part Number 500019C-001 (Control Panel) 170896B-002 (Feedhead Assembly) Feed Rolls 4 Wire Speed Range 60 - 888 (IPM) 1.5 - 22.6 (m/min.) Wire Size Range .023” - 1/8” 0.6 - 3.2 (mm) The Thermal Arc ® HMC-410 control panel and feedhead assembly are designed to exceed the demanding expectations of semiautomatic and automatic industrial applications. The heavy-duty feedhead assembly provides a 4-roll system with tach-feedback for consistent, reliable operation. A standard program/weld switch provides security to prevent unauthorized program changes. The HMC-410 is loaded with standard equipment including inch and purge switches, continuous turn knobs, a test switch permitting a practice run through of programmed weld sequences without welding, self-diagnostic routine, remote pendant amphenol, dynamic brake, input circuit breaker, multiple on-board fuses, ground fault circuit, 100% Duty Cycle and remote operation to 100 feet. The unit also features 10 schedules with user programmed parameters from preflow to postflow operations, and LED’s display preset and actual weld parameters including volts, wire feed speed, amps and weld time. The unit is also capable of additional features and capabilities with optional software upgrades. Consult the factory for customized software upgrades. FEATURES • Solid State Control • Weld/Program Keyswitch • 10 Weld Schedules • 4 Weld Subsegments for Each Schedule • Tach-Feedback for Improved Wire Feed Speed Accuracy • Multiple LED Displays • Self-Diagnostics Routine • Optional or Custom Software Upgrades ACCESSORIES • Remote Pendant Amphenol Port • Auxiliary Amphenol Port • Softswitch Screen for Programming of System Capabilities • Four Gear-Driven Feed Rolls for Increased Feedability • Rugged Heavy Duty Motor • Gas Solenoid Valve Standard Feed Roll Kits, 19 Pin Control Cables, Wire Spool Kit Assembly, Wire Reel Kit Assembly, Base Plate, Remote Pendant, Semiautomatic Trigger Hold and Subsegment Controls, Random Schedule Select Cable, Multiple Software Upgrades, Wire Reel/ Spool Support Assembly, Coil Adapters, Spool Cover, Lifting Eye Kit, Dual Feeder Interlock Box, Auxiliary Cables, Euro-Style Gun Adapter APPROVALS NEMA EW3, C<strong>SA</strong> NRTL/C Dimensions (H x W x D) 10.3” x 10” x 10.2” 262 x 254 x 259 (mm) 9” x 14” x 10” 229 x 356 x 254 (mm) Net Weight HMC-410 Brochure #84-9827 16 lbs. (7.3 kg) 26 lbs. (11.8 kg) call 1-800-255-5846 for more information WIRE FEEDERS 35
Page 1 and 2: Arc Welding Power Supplies & Access
Page 3 and 4: The Power of Information . . . Time
Page 5 and 6: ICON KEY Input Phase Frequency Prod
Page 7 and 8: Introducing Our Exciting New Line o
Page 9 and 10: Product Selection Guide WIRE FEEDER
Page 11 and 12: P-WEE ® 160S PROCESS STICK LIFT TI
Page 13 and 14: PRO-PLUS ® 400S PROCESS STICK LIFT
Page 15 and 16: PRO-LITE ® 250TS PROCESS MIG STICK
Page 17 and 18: PRO-WAVE ® 185TSW PROCESS MIG STIC
Page 19 and 20: PRO-WAVE ® 400GTSW PROCESS HF TIG
Page 21 and 22: 300 Amp Plasma Welding Modular Syst
Page 23 and 24: FABRICATOR ® 210, 250 PROCESS MIG
Page 25 and 26: Part Number 10-3012 (208 - 230 / 46
Page 27 and 28: POWER-MASTER ® 500 PROCESS MIG FLU
Page 29 and 30: ULTRA FLEX 350 PULSE PROCESS PULSE
Page 31 and 32: HEAVY DUTY CC/CV PROCESS MIG FLUX C
Page 33: ULTRAFEED ® 1000, MIJIT ® 1000 PR
Page 37 and 38: COBRAMATIC ® PYTHON ® Push-Pull S
Page 39 and 40: Automation Robotic Arc Welding Syst
Page 41 and 42: SCOUT ® TA-4/170-H PROCESS STICK S
Page 43 and 44: EXPLORER TA-8/300-KAT PROCESS MIG
Page 45 and 46: Accessories Part No. Product Used O
Page 47 and 48: International Voltages & Approvals

ThermArc Cat sec01 -INTRO 7/03 - Comercial Unisol SA

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?