TABSCREEN ELECTROL - Auvix

SPECIFICATION DATA SHEET
TABSCREEN ELECTROL
Projecta BV
P.O. Box 191, 6000 AD Weert
Franklinstraat 14
6003 DK Weert
The Netherlands
Tel: +31 (0) 495580840
Fax: +31 (0) 495580845
sales@projectascreens.com
www.projectascreens.com
SUGGESTED SPECIFICATIONS
Electrically operated projection screen 220 volt (50Hz) with a usage of no more than 1.2 Ampere. Shall have specially
designed motor mounted inside the roller, to be three wire with ground, quick reversal type, oiled for life, with
automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have preset
but adjustable limit switches to automatically stop the picture surface in the “up” and “down” positions. Junction
box shall be integrated into the housing making it possible to install the housing and wire to the building’s electrical
system during construction. The junction box shall contain a quick connect connector that is mounted in the housing
for easy plug-in connection to the motorized fabric and roller assembly. The motorized fabric and roller assembly
may be installed in the case at the factory or at a later time at the job site. The roller to be of rigid metal. Roller
mounting brackets to be adjustable to allow centering or offsetting of the screen within the case. Screen case to be
a two piece design made of extruded aluminum. Case to be fi nished in black, lightly textured powder coat. Screen
fabric to be fl ame retardant and mildew resistant vinyl with black masking borders standard. Each side of fabric to
have a tab guide cable system to maintain even lateral tension and hold surface fl at. Bottom of fabric to be inserted
into a custom aluminum slat bar with added weight to provide vertical tension on the screen surface. The ends of
the slat to be protected by heavy duty plastic caps enclosing a preset adjustable mechanism for screen tensioning.
Screen to include a three position control switch and cover plate. The projection screen is CE marked and satisfi es
the strictest quality and safety requirements.
SCREEN SURFACES
All screen fabrics are seamless in the viewing area.
Matte White; Gain 1.0, viewing angle 120º, Flame retardant, max. heigth 371 cm, max. width 411 cm.
High Contrast Cinema Vision; Gain 1.1, viewing angle 120º, Flame retardant, max. heigth 310 cm, max. width 411 cm.
Da-Tex®; Gain 1.3, viewing angle 60º, Flame retardant, max. heigth 371 cm, max. width 411 cm.
DIMENSIONS (SELECT ONE OF OUR STANDARD SIZES AND ENTER THE REQUIRED QUANTITY)
Aspect
Ratio
Overall
Dimensions
Viewing
Area
Nominal
Diagonal
hxw cm hxw cm cm inches L1
(mm)
Case (RAL
9016)
L3
(mm)
Weight Screen Surfaces Black
drop
kg Matte
White
HCCV Da-Tex® cm
4:3 132 x 175 127 x 170 213 84 2230 1940 28 30
4:3 157 x 208 152 x 203 254 100 2600 2310 33 30
4:3 180 x 239 175 x 234 305 120 2840 2550 36 30
4:3 226 x 300 221 x 295 381 150 3490 3200 45 30
4:3 279 x 371 274 x 366 457 180 4260 3970 55 30
4:3 310 x 411 305 x 406 508 200 4680 4390 61 30
16:9 119 x 208 114 x 203 234 92 2550 2260 30 30
16:9 137 x 239 132 x 234 269 106 2880 2590 31 30
16:9 152 x 269 147 x 264 302 119 3190 2910 37 30
16:9 170 x 300 165 x 295 338 133 3520 3240 44 30
16:9 203 x 358 198 x 353 404 159 4060 3770 54 30
1:1 183 x 183 178 x 178 2380 2100 30
1:1 218 x 218 213 x 213 2670 2390 30
1:1 249 x 249 244 x 244 3000 2720 30
1:1 279 x 279 274 x 274 3350 3070 30
1:1 310 x 310 305 x 305 3690 3410 30
1:1 371 x 371 366 x 366 4360 4080 30

CUSTOM SOLUTIONS
Give exact the sizes of the projection screen you need:
Viewing size: _________ Heigth (cm.) x _________ width (cm.) Surface: ________________________________
Border top: _________ (cm.) Border bottom: _________ (cm.)
White Case
Remarks: _________________________________________________________________________________
www.projectascreens.com/screendesigner
ACCESSORIES FOR OPERATION
□ Easy Install RF remote control (868,3 Mhz)
□ Easy Install wireless projectorcoupling (868,3 Mhz)
□ Easy Install wireless RF wall switch (868,3 Mhz)
□ Easy Install RF remote control with projectorcoupling (868,3 Mhz)
□ Easy Install projectorcoupling with cable (868,3 Mhz)
□ Easy Install IR remote control (868,3 Mhz)
□ Easy Install plug & play relaybox with potential free contacts (868,3 Mhz)
□ Easy Install plug & play RS232/RS422 control kit
□ Easy Install plug & play RS232/RS422 with IP control kit
□ Keyswitch
DIMENSIONS
INSTALLATION
16 cm
Project:
Architect:
Phone:
Contractor:
Phone:
Supervisor:
Phone:
Supplier:
Date:
Revised:
14,3 cm
5,9 cm
6.5 cm
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
Specifi cations subject to change.