In-Situ Oxygenation (I-SOTM) System

■ Assistance/supervision with installation
■ 24-hour service operations
■ Short-term equipment rental
■ On-site assistance, as needed
■ Portable power, if needed
■ Free estimates of oxygen and
equipment, as needed
Single, Floating I-SOTM System
The Praxair I-SOSM service combines the
technology of Praxair’s floating In-Situ
Oxygenation (I-SOTM ) system and the
TMVU-100 Portable Vaporizer.
Praxair’s I-SO TM system uses an innovative
mechanical mixer to deliver 99.5%
pure oxygen, instead of air, to boost dissolved
oxygen availability in water and
wastewater treatment systems.
Portable Oxygen Vaporizer
This unit, in conjunction with the Praxair
I-SOTM system, is delivered and set-up by
Praxair’s service technicians. The liquid
oxygen tank and vaporizer is a fully automated
unit and is equipped with a low
temperature shut-off valve to ensure that
your piping system is not exposed to
cryogenic temperatures. The unit can be
manned, if necessary. (Vaporizer shown
in photo above).
Capabilities Delivery Pressure -
to 200 PSIG
Temperature - 40° F below ambient
(Atmospheric Vaporizer) 100° F
(Steam Vaporizer)*
Flow Rate: To 125,000 SCFH
(Steam Vaporizer)* To 30,000 SCFH
(Atmospheric Vaporizer)**
Capacity: 300,000 SCF
*Requires a minimum steam pressure of 150 psi
**20,000 SCFH at 20° F below ambient
© Copyright 2003 Praxair Technology, Inc.
All rights reserved
Praxair, Inc.
39 Old Ridgebury Road
Danbury, CT 06810-5113 USA
www.praxair.com
info@praxair.com
Telephone:
1-800-PRAXAIR
(1-800-772-9247)
(716) 879-4077
Fax:
1-800-772-9984
(716) 879-2040
Contact Us to Learn More
To see if the I-SOSM service is right
for your needs, or for more information
on this and other Praxair services,
contact us at 1-800-PRAXAIR or email
info@praxair.com
Praxair, the Flowing Airstream design, and
I-SO are trademarks or registered trademarks of
Praxair Technology, Inc. in the United States
and/or other countries.
The information contained herein is offered for
use by technically qualified personnel at their
discretion and risk without warranty of any kind.
Printed in the United States of America
P-8851 09-2003