Technical Data / SkyPo Seat Power Module - Airbus KID-Systeme
Technical Data / SkyPo Seat Power Module - Airbus KID-Systeme
Technical Data / SkyPo Seat Power Module - Airbus KID-Systeme
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Technical</strong> <strong>Data</strong> / <strong>SkyPo</strong> <strong>Seat</strong> <strong>Power</strong> <strong>Module</strong><br />
SPM<br />
J7 J21<br />
J6<br />
J5<br />
J4<br />
J3<br />
<strong>KID</strong>-SYSTEME<br />
J8
<strong>Technical</strong> <strong>Data</strong> / <strong>SkyPo</strong> <strong>Seat</strong> <strong>Power</strong> <strong>Module</strong><br />
SPM – ONE SERVES UP TO 4 SEATS<br />
The new enhanced <strong>Seat</strong> <strong>Power</strong> <strong>Module</strong> provides AC and DC power to the IFE equipment as well as<br />
to the passenger power equipment.<br />
TECHNICAL DATA<br />
Dimensions: 163 x 200 x 53.8 mm<br />
Weight: max. 1.6 kg<br />
<strong>Power</strong> input: 115V AC / 360-800Hz one phase<br />
(3 phases daisy chain)<br />
<strong>Power</strong> consumption: max. 470W @ 250W PED load and<br />
150W 28V DC. Passive Cooling<br />
PED <strong>Power</strong> output: 110V AC / 60Hz max. 250W total<br />
4 power outputs / max. 150W each<br />
Safety functions: over current and over/under voltage<br />
protection, short circuit and thermal protection,<br />
GFI for passenger safety (according to<br />
UL 943 Class A) continuously tested<br />
IFE power out: 28V DC max. 150W Short circuit protection<br />
BITE: power up and continuous build in test<br />
Qualifications: according to <strong>Airbus</strong> (incl. A380) and<br />
Boeing requirements<br />
4 x Passenger<br />
Electronic Device<br />
<strong>Power</strong><br />
4 x IFE (28V DC)<br />
in RS-485<br />
4 x <strong>Power</strong> in Use Indication Lights<br />
RS-485 Daisy Chain<br />
INTERFACES<br />
RS-232<br />
(maintenance)<br />
<strong>KID</strong>-SYSTEME<br />
• <strong>Data</strong> line (3 level) input for PED output power control<br />
• Serial interfaces (RS-485) for data exchange with other in-seat<br />
components (according to ARINC 628) for:<br />
– BITE (e.g. centralized BITE via IFE)<br />
– <strong>Power</strong> Management<br />
– SW-Download<br />
– PPUI dimming<br />
– IFE power output control<br />
– Status data (e.g. centralized “<strong>Power</strong> In Use Indication” via IFE)<br />
• Discrete outputs for power in use indication light (PPUI):<br />
– One or two general common PPUI<br />
– One per ACOU<br />
– Dimmable via RS-485<br />
– Discrete input to control PED, IFE and Aux. <strong>Power</strong><br />
– Service Interface (RS-232)<br />
INTERCHANGEABILITY<br />
PED <strong>Power</strong> compatible with SKYpower<br />
AUXILIARY POWER OUTPUT<br />
3 phases 115V AC switchable<br />
115V AC<br />
(AUX eg. SCB)<br />
<strong>Power</strong> In<br />
<strong>Power</strong> Out<br />
<strong>KID</strong>-SYSTEME GMBH • LÜNEBURGER SCHANZE 30 • 21614 BUXTEHUDE • GERMANY • PHONE +49 (0) 40 743-71633 • FAX +49 (0) 40 743-83829 • WWW.<strong>KID</strong>-SYSTEME.COM<br />
© AIRBUS <strong>KID</strong>-SYSTEME 2006 • Our products are constantly being improved, technical modifications are therefore possible. • ALL RIGHTS RESERVED
Change language