list of publications - Kunststofftechnik
list of publications - Kunststofftechnik
list of publications - Kunststofftechnik
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Publications<br />
A. R. Mahendran, G. Wuzella, N. Aust, A. Kandelbauer, U. Müller<br />
„Photocrosslinkable modified vegetable oil based resin for wood surface coating<br />
application”<br />
DOI: 10.1016/j.porgcoat.2011.09.027<br />
A. R. Mahendran, N. Aust, G. Wuzella, A. Kandelbauer<br />
„Synthesis and Characterization <strong>of</strong> a Bio-Based Resin from Linsee Oil“<br />
Macromol. Symp. 311(1), 18-27 (2012)<br />
A. R. Mahendran, G. Wuzella, A. Kandelbauer, N. Aust<br />
„Thermal cure kinetics <strong>of</strong> epoxidized linseed oil with anhydride hardener“<br />
DOI: 10.1007/s10973-011-1585-7<br />
S. Schlögl, N. Aust, A. Temel, R. Schaller, A. Holzner, W. Kern<br />
„Survey <strong>of</strong> chemical residues and biological evaluation <strong>of</strong> photochemically prevulcanized<br />
surgical gloves“<br />
Monatsh. Chem., 141 (12), 1365 (2010)<br />
M. Fischlschweiger, N. Aust*, E. R. Oberaigner, C. Kock<br />
„Mathematical Modeling and Optimization <strong>of</strong> Run Parameters <strong>of</strong> Crystallization Analysis<br />
Fractionation (CRYSTAF)”<br />
Macromol. Chem. Phys. 211 (4), 383 (2010)<br />
A. R. Mahendran, N. Aust, C. T. Vijayakumar, K. Lederer<br />
„Preparation and Characterization <strong>of</strong> Partially Degraded High-Density Polyethylene in<br />
an Internal Mixer”<br />
Polym. Plast. Technol. Eng. 47(11), 1142-1146 (2008)<br />
C. Kock, A. Schausberger, N. Aust, M. Gahleitner, E. Ingolic<br />
„Polypropylene – Polyethylene Melts: Phase Structure Determination by Rheology“<br />
AIP Conference Proceedings 1027 (15th International Congress on Rheology, 2008),<br />
520-522, Publisher: American Institute <strong>of</strong> Physics, 2008<br />
N. Aust, M. Gahleitner, K. Reichelt, B. Raninger<br />
“Optimization <strong>of</strong> run parameters <strong>of</strong> Temperature Rising Elution Fractionation by the aid<br />
<strong>of</strong> a factorial design experiment”<br />
Polym. Test. 25 (7), 896 (2006)<br />
N. Aust*, S. O’Donohue, A. J. Yakhoul, N. Zash<br />
“A Column By-pass System and Its Application in High Temperature Size Exclusion<br />
Chromatography”<br />
Macromol. Mater. Eng. 291 (4), 387 (2006)<br />
N. Aust<br />
Invited Contribution to J. Biochem. Biophys. Methods, Special Issue “Size Exclusion Chromatography”:<br />
“Application <strong>of</strong> size-exclusion chromatography to polymers <strong>of</strong> ultra-high molar mass”<br />
J. Biochem. Biophys. Methods 56, 323 (2003)
M. Parth, N. Aust*, K. Lederer<br />
“Molecular Characterization <strong>of</strong> Ultra-high Molar Mass and Soluble Fractions <strong>of</strong> Partially<br />
Cross-linked Polyethylenes”<br />
Int. J. Polym. Anal. Charact. 8(3), 175 (2003)<br />
M. Parth, N. Aust*, K. Lederer<br />
“Studies on the Effect <strong>of</strong> Electron Beam Radiation on the Molecular Structure <strong>of</strong> Ultrahigh<br />
Molecular Weight Polyethylene Under the Influence <strong>of</strong> α-tocopherol with Respect<br />
to Its Application in Medical Implants”<br />
J. Mater. Sci.: Mater. Med.13, 917 (2002)<br />
N. Aust*, M. Parth, K. Lederer<br />
“The Effect <strong>of</strong> Electron Beam Radiation on the Molecular Structure <strong>of</strong> Ultra-High Molar<br />
Mass Polyethylene Used for Medical Implants”<br />
Macromol. Symp. 181, 427 (2002)<br />
M. Parth, N. Aust*, K. Lederer<br />
“Distribution <strong>of</strong> Molar Mass and Branching Index <strong>of</strong> Natural Rubber from Hevea<br />
Brasiliensis Trees <strong>of</strong> Different Age by Size Exclusion Chromatography Coupled with<br />
Online Viscometry”<br />
Macromol. Symp. 181, 447 (2002)<br />
G. Pinter, I. Duretek, N. Aust, R.W. Lang<br />
“Characterisation <strong>of</strong> the Thermo-Oxidative Degradation <strong>of</strong> Polyethylene Pipes by<br />
Chromatographical, Rheological and Thermoanalytical Methods”<br />
Macromol. Symp. 181, 213 (2002)<br />
N. Aust, M. Parth, K. Lederer<br />
“SEC <strong>of</strong> Ultra-high Molar Mass Polymers - Optimization <strong>of</strong> the Experimental Conditions<br />
to Avoid Molecular Degradation in Case <strong>of</strong> Narrow Polystyrene Standards”<br />
Int. J. Polym. Anal. Charact. 6, 245 (2001)<br />
N. Aust*, G. Gobec<br />
“Size Exclusion Chromatography as a Method for Routine Check-Up and Quality<br />
Control <strong>of</strong> Industrial Thermoplastic Polyurethane Systems - Correlation between<br />
Molecular Weight and Mechanical and Thermal Properties”<br />
Macromol. Mater. Eng. 286 (2), 119 (2001)<br />
N. Aust, Ch. Derleth, P. Zugenmaier<br />
"Studies <strong>of</strong> lyotropic crystalline mesophases <strong>of</strong> some novel regioselective substituted<br />
cellulose derivatives. 1. Synthesis and characterization"<br />
Macromol. Chem. Phys. 198(5), 1363 (1997)<br />
N. Aust, K. Lederer<br />
"A new IR detector cell with optimized optical path length for high-temperature SEC <strong>of</strong><br />
polyolefins"<br />
Int. J. Polym. Anal. Charact. 3, 219 (1997)
K. Lederer, T. Macko, G. Imrich-Schwarz, N. Aust, T. Kolmanics, T. Schwarz "Molecular<br />
Characterization <strong>of</strong> Branched Thermoplastic Polyurethanes in Dilute Solutions <strong>of</strong><br />
N-Methyl-2-pyrrolidinone"<br />
Angew. Makromol. Chem. 241, 113 (1996)<br />
K. Lederer, N. Aust<br />
"Molecular Characterization <strong>of</strong> Polyolefins"<br />
J. Macromol. Sci.: Pure & Appl. Chem. A33(7), 927 (1996)<br />
N. Aust, I. Beytollahi-Amtmann, K. Lederer<br />
"Determination <strong>of</strong> the Distribution <strong>of</strong> Molar Mass and Comonomer Content <strong>of</strong> Medium<br />
Density Polyethylene. Comparison <strong>of</strong> Procedures with Alternative Sequence <strong>of</strong><br />
Fractionation"<br />
Int. J. Polym. Anal. Charact. 1, 245 (1995)<br />
N. Aust, P. Zugenmaier<br />
"Interactions in aqueous polypeptide derivative / surfactant systems"<br />
Polym. Bull. 31, 213 (1993)<br />
N. Aust, P. Zugenmaier<br />
"Formation <strong>of</strong> supermolecular structures <strong>of</strong> polysaccharide-surfactant complexes in<br />
aqueous solutions - Influence <strong>of</strong> the polymer backbone"<br />
Makromol. Chem. 194, 1583 (1993)<br />
N. Aust, U. Meyer-Kolshorn, A. Schreiber, P. Zugenmaier<br />
"Correlation between microscopic structural parameters and macroscopic flow<br />
behaviour <strong>of</strong> some polymer-surfactant systems suitable for tertiary oil recovery"<br />
Angew. Makromol. Chem. 195, 57 (1992)<br />
P. Zugenmaier, N. Aust<br />
"Rheological investigations on the interaction <strong>of</strong> cellulose derivatives with sodium<br />
dodecyl sulfate in aqueous solution"<br />
Makromol. Chem. Rapid Commun. 11, 95 (1990)<br />
P. Zugenmaier, U. Meyer-Kolshorn, M. Walter, A. Schreiber, N. Aust, W. Thyen<br />
"Entwicklung salzunempfindlicher, wasserlöslicher Polymerer mit besonderer Eignung<br />
zum Polymerfluten für die tertiäre Erdölgewinnung und Untersuchung ihrer<br />
Langzeitstabilität"<br />
Forschungsbericht 26463A, 29 ff., Bundesministerium für Forschung und Technologie,<br />
Bonn/Germany, 1988
Books and Book Contributions<br />
N. Aust, J.K. Fink, W. Kern<br />
„From Molecular Structure to Performance <strong>of</strong> Polymeric Materials“<br />
ISSN: 1022-1360, Wiley-VCH, Weinheim 2012<br />
K. Lederer, N. Aust<br />
“Chemical and Physical Aspects <strong>of</strong> Polymer Science and Engineering”<br />
ISBN: 3-527-30471-1, Wiley-VCH, Weinheim 2002<br />
P. Zugenmaier, U. Meyer-Kolshorn, N. Aust, A. Schreiber<br />
"Grundlagenforschung Chemisches Fluten - Korrelation zwischen strukturellen<br />
Parametern und Viskositätsergiebigkeit in tensidfreien und tensidhaltigen<br />
Polymerlösungen"<br />
DGMK-Forschungsbericht 295-7, 73 ff., Deutsche Wissenschaftliche Gesellschaft für<br />
Erdöl, Erdgas und Kohle e.V., Hamburg/Germany, 1992, ISBN 3-928164-27-9
Lectures<br />
A. Mahendran, G. Wuzella, N. Aust, A. Kandelbauer<br />
„Photocrosslinkable vegetable oil modified resin for fiber reinforced composite and<br />
wood surface coating application”<br />
Coatings Science International COSI 2011, Noordwijk, The Netherlands 2011<br />
W. Friesenbichler*, J. Rajganesh, G. Steinbichler, N. Aust<br />
„Physical Model for the Expansion Injection Molding Process and Degradation Effects<br />
on the Injection Molded Parts”<br />
Proceedings <strong>of</strong> the 4th International PMI Conference 2010, Gent, Belgium 2010<br />
A. Mahendran*, N. Aust, G. Wuzella, A. Kandelbauer<br />
„Synthesis and Characterization <strong>of</strong> Biobased Resins from Natural Oils”<br />
2nd Joint Austrian & Slowenian Polymer Meeting ASPM 2010 and 10th Austrian<br />
Polymer Meeting, Leoben/Austria 2010<br />
C. Kock*, A. Schausberger, N. Aust, M. Gahleitner, E. Ingolic<br />
„Polypropylene – Polyethylene melts: Phase structure determination by Rheology “<br />
The XVth International Congress on Rheology, Monterey CA/USA 2008<br />
C. Kock*, A. Schausberger, N. Aust, M. Gahleitner, E. Ingolic<br />
„Polypropylene – Polyethylene melts: Phase structure determination by Rheology “<br />
1st Joint Austrian & Slovenian Polymer Meeting ASPM 2008 and 9th Austrian<br />
Polymer Meeting, Graz/Austria 2008<br />
C. Kock*, N. Aust, A. Schausberger, M. Gahleitner, K. Reichelt<br />
„Korrelation von Produktionsparametern und Anwendungseigenschaften schlagzäher<br />
Copolymere“<br />
2. wissenschaftliches Symposium der Polymer Competence Center Leoben GmbH,<br />
Leoben/Austria 2007<br />
N. Aust<br />
“Chemical Analysis <strong>of</strong> Ultra-High Molar Mass Polymeric Materials”<br />
Symposium Chemie der Kunstst<strong>of</strong>fe 2007, Leoben/Austria 2007<br />
N. Aust*, K. Lederer<br />
„Molekulare Charakterisierung von synthetischen und natürlichen Polymeren hoher<br />
Molmassen und von heterophasischen Copolymeren“<br />
1. wissenschaftliches Symposium der Polymer Competence Center Leoben GmbH,<br />
Leoben/Austria 2004<br />
K. Lederer*, N. Aust<br />
“Molecular Characterization <strong>of</strong> Polymeric Materials”<br />
Polymerwerkst<strong>of</strong>fe 2002, Halle/Germany 2002
N. Aust*, M. Parth, K. Lederer<br />
“Distribution <strong>of</strong> the Molar Mass and Branching Index <strong>of</strong> Natural Rubber from Hevea<br />
Brasiliensis Trees <strong>of</strong> Different Age by Size Exclusion Chromatography Coupled with<br />
Online Viscometry”<br />
5 th Austrian Polymer Meeting - International Conference, Leoben/Austria 2001<br />
N. Aust*, G. Gobec<br />
“Characterization <strong>of</strong> Prepolymers for Thermoplastic Polyurethanes (TPU)”<br />
4. Österreichische Polymertage, Innsbruck/Austria 2000<br />
K. Lederer*, N. Aust, M. Parth<br />
“Recent Topics in Chromatographic Characterization <strong>of</strong> Industrial Polymeric Materials”<br />
12 th International Symposium on Polymer Analysis and Characterization,<br />
La Rochelle/France 1999<br />
K. Lederer*, M. Parth, N. Aust<br />
“SEC <strong>of</strong> Ultra-High Molar Mass Polymers”<br />
13 th International Conference on Polymers, Bratislava/Slovakia 1999<br />
M. Parth*, N. Aust<br />
“Untersuchungen zum Abbau ultrahochmolekularer Polystyrole in der SEC“<br />
Österreichische Chemietage der GÖCh, Graz/Austria 1998<br />
N. Aust*<br />
"Molekulare Charakterisierung von EPDM-Kautschuken durch SEC mit Multidetektion"<br />
26. GDCh-Hauptversammlung und 100-Jahrfeier GÖCh, Wien/Austria 1997<br />
P. Zugenmaier*, N. Aust, K. Schmidt<br />
“Überstrukturen von Polysaccharid-Tensid-Systemen in wäßrigen Lösungen”<br />
5. Cellulosezirkel, Hamburg/Germany 1996<br />
N. Aust*, K. Lederer<br />
"Determination <strong>of</strong> the distribution <strong>of</strong> molar mass and comonomer content <strong>of</strong> medium<br />
density polyethylene by solution fractionation and SEC"<br />
7 th International Symposium on Solubility Phenomena, Leoben/Austria 1996<br />
N. Aust*, I. Beytollahi-Amtmann, K. Lederer<br />
"Molekulare Charakterisierung von Ethylen-1-Hexen-Copolymeren"<br />
8. Österreichische Chemietage, Gesellschaft Österreichischer Chemiker,<br />
Graz/Austria 1994
Poster Presentations<br />
Mahendran, N. Aust, G. Wuzella, U. Müller, A. Kandelbauer<br />
„Bio-based Non-Isocyanate Polyurethane Coatings Derived from Plant Oils“<br />
19 th Annual BEPS Meeting, Vienna/Austria 2011<br />
M. Fischlschweiger, N. Aust, E.R. Oberaigner, C. Kock<br />
„Quality modeling and optimization <strong>of</strong> run parameters <strong>of</strong> Crystallization Analysis<br />
Fractionation (CRYSTAF)”<br />
European Polymer Congress 2009, Graz/Austria 2009<br />
M. Fischlschweiger, N. Aust, E.R. Oberaigner, C. Kock<br />
Winner <strong>of</strong> the poster award in Gold<br />
„Quality modeling and optimization <strong>of</strong> run parameters <strong>of</strong> Crystallization Analysis<br />
Fractionation (CRYSTAF)”<br />
Advances in Polymer Science & Technology (APST ONE), Linz/Austria 2009<br />
M. Gahleitner, C. Kock, A. Schausberger, N. Aust, K. Reichelt<br />
„Determination <strong>of</strong> the Molar Mass Distribution from Rheological Measurements and Size<br />
Exclusion Chromatography: A Comparative Study“<br />
The Polymer Processing Society 24 th Annual Meeting, Salerno/Italy 2008<br />
C. Kock, A. Schausberger, N. Aust, M. Gahleitner<br />
„Determination <strong>of</strong> the Molar Mass Distribution from Rheological Measurements and Size<br />
Exclusion Chromatography: A Comparative Study“<br />
20 th International Symposium on Polymer Analysis and Characterization, Agios<br />
Nikolaos, Crete/Greek 2007<br />
N. Aust, M. Gahleitner, K. Reichelt, B. Raninger<br />
„Optimization <strong>of</strong> Run Parameters <strong>of</strong> Temperature Rising Elution Fractionation with the<br />
Aid <strong>of</strong> a Factorial Design Experiment”<br />
European Polymer Congress 2007, Portoroz/Slovenia 2007<br />
N. Aust, M. Parth, A.J. Yakhoul, N. Zash, S. O’Donohue, K. Lederer<br />
“Optimization <strong>of</strong> Size Exclusion Chromatography for the Characterization <strong>of</strong> Polymers <strong>of</strong><br />
Ultra-high Molar Mass”<br />
European Polymer Congress 2007, Portoroz/Slovenia 2007<br />
C. Kock, M. Gahleitner, K. Reichelt, N. Aust, E. Ingolic<br />
„Morphology Consequences on Fracture Mechanics <strong>of</strong> PP-PE-Blends”<br />
11. Tagung: Problemseminar Deformation und Bruchverhalten von Kunstst<strong>of</strong>fen,<br />
Merseburg/Germany 2007<br />
N. Aust, M. Gahleitner, K. Reichelt, B. Raninger<br />
“Optimization <strong>of</strong> Run Parameters <strong>of</strong> Temperature Rising Elution Fractionation with the<br />
Aid <strong>of</strong> a Factorial Design Experiment”<br />
8 th Austrian Polymer Meeting - International Conference, Linz/Austria 2006
N. Aust, M. Parth, K. Lederer<br />
“Size-Exclusion Chromatography <strong>of</strong> Polymers <strong>of</strong> Ultra-high Molar Mass”<br />
17 th International Symposium on Polymer Analysis and Characterization,<br />
Heidelberg/Germany 2004<br />
T. Macko, N. Aust, W. Reinberger, K. Lederer<br />
“Usefulness <strong>of</strong> Cloud Point Data in Liquid Chromatography <strong>of</strong> Polymers and Simple<br />
Method for Continuous Measurement <strong>of</strong> Cloud Point in Mixed Solvents. Application on<br />
Polyolefins”<br />
24 th International Symposium on Chromatography, Leipzig/Germany 2002<br />
N. Aust, M. Parth, Ch. Wolf, K. Lederer<br />
“Studies on the Effect <strong>of</strong> Electron Beam Radiation on the Molecular Structure <strong>of</strong> Ultra-<br />
High Molar Mass Polyethylene under the Influence <strong>of</strong> alpha-Tocopherol”<br />
5 th Austrian Polymer Meeting - International Conference, Leoben/Austria 2001<br />
T. Macko, N. Aust, K. Lederer<br />
“High Temperature Liquid Chromatography <strong>of</strong> Polyethylene and Polypropylene under<br />
Limiting Conditions”<br />
16 th International Meeting on Polymers: Coupled, Hyphenated and Multidimensional<br />
Liquid Chromatographic Procedures for Separation <strong>of</strong> Macromolecules,<br />
Bratislava/Slovakia 2001<br />
N. Aust, M. Parth, K. Lederer<br />
“Effect <strong>of</strong> Electron Beam Radiation on the Molecular Structure <strong>of</strong> Polyethylene <strong>of</strong> Ultra-<br />
High Molar Mass”<br />
International GPC Symposium 2000, Las Vegas / USA 2000<br />
M. Parth, N. Aust<br />
“SEC <strong>of</strong> UHMW-Polyethylen with Triple-Detection”<br />
4. Österreichische Polymertage, Innsbruck/Austria 2000<br />
Ch. Derleth, N. Aust, P. Zugenmaier<br />
“Regioselective Substituted Cellulose Urethanes in Dilute and Concentrated Solutions:<br />
Determination <strong>of</strong> the Molecular Weight and Studies <strong>of</strong> Lyotropic Liquid Crystalline<br />
Mesophases“<br />
DFG-Schwerpunktprogramm “Cellulose in Lösung“, Breisach/Germany 1997<br />
T. Macko, N. Aust, G. Imrich-Schwarz, K. Lederer<br />
"SEC <strong>of</strong> Thermoplastic Polyurethanes on a Silica Gel Column with N-Methyl-<br />
Pyrrolidinone as Eluent"<br />
10 th International Conference on Macromolecules, Bratislava/Slovakia 1995<br />
P. Höllwarth, K. Lederer, N. Aust<br />
"Ein neues S<strong>of</strong>twarepaket für die Auswertung der Gelpermeationschromatographie<br />
gekoppelt mit Lichtstreuung"<br />
8. Österreichische Chemietage, Gesellschaft Österreichischer Chemiker,<br />
Graz/Austria 1994
N. Aust, K. Lederer<br />
"Eine neue Vorgehensweise zur Bestimmung der Verteilung von Molmasse und<br />
Comonomer-Gehalt von linearem Polyethylen (PE-MD)"<br />
Technova International, Graz/Austria 1994
Change language