Graphic- and Text Display GTD - NORMA systems

Access by card
Technical Data:
RS232-protocol
(or – optionally -
TCP/IP)
Hardware: Software:
Video signal:
- Video input/ Video output PAL, 75 Ohm 1Vp-p
Text insertion:
- Characters displayed in 16 rows consisting of
40 characters, fixed character set
- Special characters optionally possible
- Configurable character color / background
- Generation of screen background signal in
case of video loss
Real time clock:
- Battery backup; accuracy: 10ppm/ 25 ° C
Interfaces:
- 2x RS232, 9-pole SUB-D male and female
connector
- 10Mbit Ethernet RJ45 (optionally)
- 1 Relay output; 2 status-LED
- PS/2-keyboard socket
Programming Setup memory:
- Firmware and setup programming via RS232
interface; flash memory
- On screen camera text stored in EEPROM
Housing:
- WxHxD: 140x45x83mm
- Color: RAL 7037, powder coated
Power requirements:
- External Power adaptorl 9-12V DC; 800mA
CE according to EG-guideline 89/336/EWG
NORMA systems ® GmbH
Eidersteder Str. 24 Fon +49 4322 / 75476-0 Fax +49 4322 / 75476-20
D-24582 Bordesholm www.norma-systems.de info@norma-systems.de
Graphic- and Text Display GTD
Displaying of access control data :
Event-recording
by relay
Recording of card data
at database
- Programming of interface control parameters
via PC software
- Different protocols (e.g. ATM, access control
systems) are included on CD-ROM
- Special POS software in order to define start-
and stop-terms respectively exceptions
- Seriellal polling possible
- Text displaying of up to 16 data fields,
- Free positioning of defined data fields; display
timeout adjustable
- Synchronization of the real time clock by protocol
data possible
- On screen camera text and real time clock via
PS/2 keyboard configurable
- Automatic daylight saving time
- A relay can be triggered by protocol data;
relay energizing time adjustable
- Baud rates 1200...115.200 baud
- Firmware upgrading via PC-Programm
Options:
- Protocol integration of data transmission via
ethernet
- Adaptation of the data output to an external
database system
- Configuration of all parameters via modem
possible (Remote maintenance)
Accessories:
Displaying of
card data
Nr.: 987345897
04/08/06 12:34:12
PC-Software, operating instructions, RS232-cable,
D-SUB-connector, terminal block, power adaptor