Black Sheep Bikes 2012 Price List

Black Sheep Bikes 2012 Price List
2012
1/09/12
Product Details
FRAMES-
High Light Soft Tail $3850
Stellar $3450
Luna Vista $3600
Stelleon $3600
NONAME $3500
Zamer (36er) $3600
Bladed Suspension, 95mm of Travel, RP23 included
Twin Cantilever -single arc, positive top tube
Twin Cantilever- two bends, bridged seat tube and top tube, s bend top tube
Twin Cantilever- two bends, positive top tube
S bend top tube, positive arc seat stays, no tank tube
Any Style
High Light/ High Roller $3450 Positive top tube, positive seat stays, tank tube- straight or curved
Shoreline $3000 Double Diamond Mountain
Speedster $3450
Northdam $2900
Cyclocross $2900
FORKS -
Faith- $1100
UniCrown $600
Road $550
BARS-
Lone Star $375
MM $275
Scorcher $250
Riser- $250
Flatter $200
One Piece Bar /Stem $600
SEAT POSTS-
Thomson Head $230
Infinity $230
Twin top tube/ Cantilever stays
Double Diamond Road
Double Diamond Cross
Trussed Fork
Straight or Curved blades, single crown
Straight or curved blade, swaged blade
+$75- Bullets- Three piece welded
6 bend- 9- 65 degree- three hand positions
4 bend, drop or rise, one hand position
4 bend Mountain Bar- one hand position
2 bend- one hand position
Any bar and stem combo
Thomson Head- black or silver
STEMS $350 Paragon Face Plate
Bold Head- Black, Silver, Blue, Red, Gold, Purple

Black Sheep Bikes 2012 Price List
2012
1/09/12
FRAME AND FORK OPTIONS
HACS +$125 Horizontally Adjustable Chain Stays
S and S Couplers +$350 each
Paragon Sliding Dropouts +$75
Paragon Rocker Dropouts +$100
Paragon Hooded Sliders +$200
Rohloff Cable Guide Upgrade +$100
Extra H2O Bosses (2 sets incl.) +$40
Internal Cable Routing +$75 One tube, one line each
Rack and Fender Mounts- 5mm +$40 Per 2
Extra Brake Option- Disc, V,Cant+$100
Jen Green Badge- +$100 Standard Sheep
Jen Green Custom Badge +$150- $375
Paragon Tube Splitter +$75 For Belt Drive
Tube Splitter Travel Option- + $150 Only frame with sheep plate- Road- +$175
Fast Back Travel Option- +150 Standard Seat Stays Only
44mm Head Tube Option - +$75
Bottle Opener +$25
BB30 Option +50
Media Etching-
Positive Word Mark and Sheep +$125
Negatives and Banding +$150 Negative lettering and sheep, bands on ends of each
Custom Media Etching +$100 plus $45 an hour

FITUP MEASUREMENTS:
Height
Inseam
Deltoid to hip
Hip to ankle
Hip to knee
Knee to ankle
Deltoid to wrist
Width of palm
First is height, this is just for a general starting point, stand feet together, barefoot, with back straight.
Second is the inseam. For this measurement it might take two people. Stand with legs together, and a
broom handle, or something similar between your legs, and level with the ground. Measure from top of
the handle to the ground. This will help determine the safe standover dimension, as well as headtube
length.
Third is from the end of your collarbone at the shoulder to the top of your pelvis on the outside. This is
done with the arm relaxed, and hands by your side. This dimension coupled with number seven
determines toptube length.
Fourth is from the top of the pelvis to the center of the ball of your ankle on the outside. This
dimension, coupled with five and six will determine seattube length, and seattube angle.
Fifth is again from the pelvis, downward to the center of the kneecap. The ratio between this dimension
and number six is used for seattube angle info.
Sixth starts at the center of the kneecap, and goes downward to the center of the ball of your ankle.
This is the tibia/fibula length used in the seattube angle calc.
The seventh dimension is from the ball of the wrist to the end of the collarbone at the shoulder.
This, and the third dimension determine toptube length.
Finally is the width of palm. This determines optimum saddle height, and stem length.