professional wireless microphone systems - Wisycom srl

More documents

Recommendations

Info

10 accessories LBN1 LBNA Broadband Antenna Broadband Antenna with integrated booster Ruggedized directional broadband antenna. The integrated booster allows you to best compensate cable losses up to 15 dB (adjustable gain in 1 dB step). Easy to setup with a LED display and touch buttons. AGN ABN BAW BAA Ground Plane Antenna Ground Plane Antenna with integrated booster High Power Antenna Booster (22 dB gain) High Power Antenna Booster (15 dB gain) Antenna boosters with up to 47 dBm OIP3 for high-end broadband installations. Up to 21 dB gain adjustable in 1 dB step. Easy to setup with an LED display and touch buttons. Ruggedized waterproof housing. SPL214AW SPL218AW Broadband Splitter Broadband Splitter Active broadband antenna splitter to feed 4 or 8 diversity receivers. CSA221 CSA121 MAT243 MAT283 Broadband Radiofrequency Matrix/Combiner Broadband Radiofrequency Matrix/Combiner It can combine up to 3 diversity antenna input chosen on 4 or 8 diversity inputs, also with a GPIO integrated (8 alarms and 3 relays). All remotable through Ethernet and USB. PTT301 - PTT305 SRE300 - SRE301 Push to talk (PTT) ring 3rd Party head adapter PTT301 ring fits between microphone body and capsule and enables PTT functions on MIC. It is available in a slim (1 cm height ) version, or with a 5 cm body (PTT305) to allow usage of foam windshield. SRE300 allows to mount on MTH300 3rd party Condenser/Dynamic Mic heads. MCM301 - MCM303 MCM302 - MCM304 MCM306 - MCM307 Passive combiner/splitter (2 x 2 :1) Passive combiner/splitter with booster power supply (2:1 with Pwr) Rugged wideband combiners cabable to stand/supply up to 2 Amp booster current Condenser Microphone Capsule (custom Schoeps) Condenser Microphone Capsule (custom Milab) Condenser Microphone Capsule (DPA) Outstanding tonal performances and maximum sound clarity. Ruggedized stainless steel mechanical construction and 2 micro-mesh section for unbeatable pop-suppression. Redundant gold-plated connections.
technical data MRK 960 DUAL TRUE DIVERSITY Frequency ranges 470-840 MHz Receiving frequencies 40 banks of 60 channel each (user program.) Switching bandwidth 370 MHz Nominal/Peak deviation ±40 KHz/±56 KHz Frequency stability < ± 2.5 ppm, within temperature range Receiver principle True Diversity (twin receiver circuits) Sensitivity < 0.9 µV for SND/N = 52 dB(A) peak ref. < 10 µV for SND/N = 115 dB(A) peak ref. Adjacent channel selectivity > 90 dB @ ± 300 KHz Spurious rec. rejection > 90 dB IF image rejection > 96 dB IIP3 (Input 3°-order Intercept Point) +20 dBm Squelch signal strength squelch: settable (0-1000 µV) tone squelch: on a subcarrier digitally modulated Analog compander Wisycom ENR (separated attack/release time) Digital compander (40 bit DSP) Multicompander emulation with 0,4 ms latency Signal to noise ratio (SND/N) >= 118 dB(A) @ 1mVrf, @ 1 KHz mod, peak ref. Distortion (THD) 0.08% typ. (nominal deviation @ 1 kHz) Audio Output Level (peak deviation, 1 kHz) 18 dBu Audio Outputs 2 XLR-3 connector (AF out) 2 XLR-3 connector (PTT option, PTT950) AES-EBU Digital Audio XLR-3 and BNC 75 Ohm word clock Data link 2 USB, data link and receiver chain connections 10/100 Base TX RJ45 ethernet Monitor output 1/4” (6.3 mm) stereo jack connector Power requirements 90 – 253 V AC, 50/60 Hz Internal splitter active Temperature range -10 °C to + 55 °C Housing Ruggedized aluminum frame Dimensions 19” /1U rack, 35 cm depth Weight Approx 4 kg MTP 30 BODYPACK TRANSMITTER RF output power 10/50 mW Switchable channels 320 allocated by 8 groups of 60 channels Frequency range 470-870 MHz Switching Bandwidth Up 122 MHz Modulation wideband FM, with 50 µs pre-emphasis Nominal/Peak deviation ±40 KHz/±56 KHz Noise-Reduction Wisycom ENR (separated attack/release time) AF bandwidth 40 - 20000 Hz Signal-to-noise ratio typ. 115 dB (A)rms with 40kHz deviation Distortion (THD) < 0.3 % (0.15 % typ.) Gain adjustable range 80 dB from -60 dBu to 20 dBu (nominal dev.) Display High contrast OLED (96 x 36 pixels) Power supply 2 AA (1 AA for MTP41) size batteries Operating time approx. 11 hrs with high power 50 mW approx. 14 hrs with low power 10 mW Dimensions 73 mm x 61 mm (56 mm for MTP41) x 17 mm Weight (without battery) 80 g (75 g for MTP41) MCM 301/302/303/304/305 MICROPHONE HEAD Capsule MCM 301/303, SCHOEPS custom condenser MCM 302/304, MILAB custom condenser MCM 306/307 DPA custom condenser Pick-up pattern Omnidirectional (MCM 304) Cardioid (MCM 301/302/307) Hypercardioid (MCM 303/306) Frequency response 40 - 20000 Hz Equivalent Noise DIN/IEC 651 30 dB-A (CCIR 468-3 41 dB) Max SPL with less 0.5% THD 150 dB Dimensions 73 mm length, 50 mm diameter Housing Stainless Steel body and mesh MCR 42 WIDEBAND CAMERA RECEIVERY Frequency ranges 470-678 MHz for MCR42-L 590-822 MHz for MCR42-H Receiving frequencies 40 banks of 60 channel each (user program.) Switching bandwidth Up 232 MHz Nominal/Peak deviation ±40 KHz/±56 KHz Frequency stability < ± 2.5 ppm, within temperature range Receiver principle True Diversity (twin receiver circuits) Sensitivity < 2 µV ( +6 dBµV) for SND/N > 58 dB < 5 µV (+14 dBµV) for SND/N > 98 dB Adjacent channel selectivity > 80 dB @ ± 400 KHz Spurious rec. rejection > 90 dB IF image rejection > 90 dB IIP3 (Input 3°-order Intercept Point) +10 dBm typical Squelch signal strength squelch: settable (0-100 µV) tone squelch: on a subcarrier digitally modulated Analog compander Wisycom ENR (separated attack/release time) Additional compander Compatible with most existing systems, thru an internal DSP emulation of SA572, SA575 and rms envelope compander chipset Signal to noise ratio (SND/N) 110 dB typical (analogue), > 125 dB (AES3) Distortion (THD) 0.3% typ. (nominal deviation @ 1 kHz) Audio Output Level (peak deviation, 1 kHz) 12 dBu (line) Audio Outputs 2 mini XLR-3F connectors line out (Analogue/AES3) 1 mini XLR-5F PTT out 1 Jack 3.5 mm with locking Power requirements 1.4 Watts @ 4-18 VDC Temperature range -10 °C to + 55 °C Housing Ruggedized aluminum frame Dimensions “Slot in” execution: 68 x 18 x 115 mm “Stand alone execution”: 68 x 18 x 135 mm Weight 240 g approx MTH 300 HAND-HELD TRANSMITTER RF output power 10 mW or 10/50 mW (region dependent) Switchable channels 320 allocated by 8 groups of 60 channels Frequency range 470-870 MHz Switching Bandwidth Up 122 MHz Modulation wideband FM, with 50 µs pre-emphasis Nominal/Peak deviation ±40 KHz/±56 KHz Noise-Reduction Wisycom ENR (separated attack/release time) AF bandwidth 40 - 20000 Hz Signal-to-noise ratio typ. 115 dB (A)rms with 40kHz deviation Distortion (THD) < 0.3 % (0.15 % typ.) Gain adjustable range 60 dB Display High contrast OLED (96 x 36 pixels) Power supply 2 AA size batteries (Alkaline, recharg. NiMH) Operating time approx. 11 hrs with high power 50 mW approx. 14 hrs with low power 10 mW Dimensions (without head) 183 mm length, 33 mm diameter Weight (incl. battery) Approx 300 g SPL214AW / SPL218AW BROADBAND SPLITTER Antenna Inputs 2 N-female Booster supplied +12 VDC/ 700mA max Antenna Outputs 4 + 4 BNC-Female (SPL214AW) 8 + 8 BNC-Female (SPL218AW) Input/Output Gain +2 dB (typical) ± 1 dB linearity OIP3 (Output 3rd order Intercept Point) 38 dBm Power Supply 90 – 253 V AC / T2A, 50/60 Hz 10 - 16 VDC (with self re-settable fuse) Dimensions 19” /1U rack, 35 cm depth Housing Ruggedized aluminum frame 11
Page 1 and 2: professional AUDIO systems - WIRELE
Page 3 and 4: professional wireless microphone sy
Page 5 and 6: THE ideal choice for speech and voc
Page 7 and 8: high-performance Superb audio quali
Page 9: SLK 42-IK “Slot-in” kit for Pan

professional wireless microphone systems - Wisycom srl

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?