professional wireless microphone systems - Wisycom srl

technical data
MRK 960 DUAL TRUE DIVERSITY
Frequency ranges 470-840 MHz
Receiving frequencies 40 banks of 60 channel each (user program.)
Switching bandwidth 370 MHz
Nominal/Peak deviation ±40 KHz/±56 KHz
Frequency stability < ± 2.5 ppm, within temperature range
Receiver principle True Diversity (twin receiver circuits)
Sensitivity < 0.9 µV for SND/N = 52 dB(A) peak ref.
< 10 µV for SND/N = 115 dB(A) peak ref.
Adjacent channel selectivity > 90 dB @ ± 300 KHz
Spurious rec. rejection > 90 dB
IF image rejection > 96 dB
IIP3 (Input 3°-order Intercept Point) +20 dBm
Squelch signal strength squelch: settable (0-1000 µV)
tone squelch: on a subcarrier digitally modulated
Analog compander Wisycom ENR (separated attack/release time)
Digital compander (40 bit DSP) Multicompander emulation with 0,4 ms latency
Signal to noise ratio (SND/N) >= 118 dB(A) @ 1mVrf, @ 1 KHz mod, peak ref.
Distortion (THD) 0.08% typ. (nominal deviation @ 1 kHz)
Audio Output Level (peak deviation, 1 kHz) 18 dBu
Audio Outputs 2 XLR-3 connector (AF out)
2 XLR-3 connector (PTT option, PTT950)
AES-EBU Digital Audio XLR-3 and BNC 75 Ohm word clock
Data link 2 USB, data link and receiver chain connections
10/100 Base TX RJ45 ethernet
Monitor output 1/4” (6.3 mm) stereo jack connector
Power requirements 90 – 253 V AC, 50/60 Hz
Internal splitter active
Temperature range -10 °C to + 55 °C
Housing Ruggedized aluminum frame
Dimensions 19” /1U rack, 35 cm depth
Weight Approx 4 kg
MTP 30 BODYPACK TRANSMITTER
RF output power 10/50 mW
Switchable channels 320 allocated by 8 groups of 60 channels
Frequency range 470-870 MHz
Switching Bandwidth Up 122 MHz
Modulation wideband FM, with 50 µs pre-emphasis
Nominal/Peak deviation ±40 KHz/±56 KHz
Noise-Reduction Wisycom ENR (separated attack/release time)
AF bandwidth 40 - 20000 Hz
Signal-to-noise ratio typ. 115 dB (A)rms with 40kHz deviation
Distortion (THD) < 0.3 % (0.15 % typ.)
Gain adjustable range 80 dB from -60 dBu to 20 dBu (nominal dev.)
Display High contrast OLED (96 x 36 pixels)
Power supply 2 AA (1 AA for MTP41) size batteries
Operating time approx. 11 hrs with high power 50 mW
approx. 14 hrs with low power 10 mW
Dimensions 73 mm x 61 mm (56 mm for MTP41) x 17 mm
Weight (without battery) 80 g (75 g for MTP41)
MCM 301/302/303/304/305 MICROPHONE HEAD
Capsule MCM 301/303, SCHOEPS custom condenser
MCM 302/304, MILAB custom condenser
MCM 306/307 DPA custom condenser
Pick-up pattern Omnidirectional (MCM 304)
Cardioid (MCM 301/302/307)
Hypercardioid (MCM 303/306)
Frequency response 40 - 20000 Hz
Equivalent Noise DIN/IEC 651 30 dB-A (CCIR 468-3 41 dB)
Max SPL with less 0.5% THD 150 dB
Dimensions 73 mm length, 50 mm diameter
Housing Stainless Steel body and mesh
MCR 42 WIDEBAND CAMERA RECEIVERY
Frequency ranges 470-678 MHz for MCR42-L
590-822 MHz for MCR42-H
Receiving frequencies 40 banks of 60 channel each (user program.)
Switching bandwidth Up 232 MHz
Nominal/Peak deviation ±40 KHz/±56 KHz
Frequency stability < ± 2.5 ppm, within temperature range
Receiver principle True Diversity (twin receiver circuits)
Sensitivity < 2 µV ( +6 dBµV) for SND/N > 58 dB
< 5 µV (+14 dBµV) for SND/N > 98 dB
Adjacent channel selectivity > 80 dB @ ± 400 KHz
Spurious rec. rejection > 90 dB
IF image rejection > 90 dB
IIP3 (Input 3°-order Intercept Point) +10 dBm typical
Squelch signal strength squelch: settable (0-100 µV)
tone squelch: on a subcarrier digitally modulated
Analog compander Wisycom ENR (separated attack/release time)
Additional compander Compatible with most existing systems, thru an
internal DSP emulation of SA572, SA575 and rms
envelope compander chipset
Signal to noise ratio (SND/N) 110 dB typical (analogue), > 125 dB (AES3)
Distortion (THD) 0.3% typ. (nominal deviation @ 1 kHz)
Audio Output Level (peak deviation, 1 kHz) 12 dBu (line)
Audio Outputs 2 mini XLR-3F connectors line out (Analogue/AES3)
1 mini XLR-5F PTT out
1 Jack 3.5 mm with locking
Power requirements 1.4 Watts @ 4-18 VDC
Temperature range -10 °C to + 55 °C
Housing Ruggedized aluminum frame
Dimensions “Slot in” execution: 68 x 18 x 115 mm
“Stand alone execution”: 68 x 18 x 135 mm
Weight 240 g approx
MTH 300 HAND-HELD TRANSMITTER
RF output power 10 mW or 10/50 mW (region dependent)
Switchable channels 320 allocated by 8 groups of 60 channels
Frequency range 470-870 MHz
Switching Bandwidth Up 122 MHz
Modulation wideband FM, with 50 µs pre-emphasis
Nominal/Peak deviation ±40 KHz/±56 KHz
Noise-Reduction Wisycom ENR (separated attack/release time)
AF bandwidth 40 - 20000 Hz
Signal-to-noise ratio typ. 115 dB (A)rms with 40kHz deviation
Distortion (THD) < 0.3 % (0.15 % typ.)
Gain adjustable range 60 dB
Display High contrast OLED (96 x 36 pixels)
Power supply 2 AA size batteries (Alkaline, recharg. NiMH)
Operating time approx. 11 hrs with high power 50 mW
approx. 14 hrs with low power 10 mW
Dimensions (without head) 183 mm length, 33 mm diameter
Weight (incl. battery) Approx 300 g
SPL214AW / SPL218AW BROADBAND SPLITTER
Antenna Inputs 2 N-female
Booster supplied +12 VDC/ 700mA max
Antenna Outputs 4 + 4 BNC-Female (SPL214AW)
8 + 8 BNC-Female (SPL218AW)
Input/Output Gain +2 dB (typical) ± 1 dB linearity
OIP3 (Output 3rd order Intercept Point) 38 dBm
Power Supply 90 – 253 V AC / T2A, 50/60 Hz
10 - 16 VDC (with self re-settable fuse)
Dimensions 19” /1U rack, 35 cm depth
Housing Ruggedized aluminum frame
11