MIRAN SapphIRe - IE Monitoring Instruments

MIRAN SapphIRe Summary Specifications
Detector Type Single beam infrared spectrophotometer
Optics Linear Variable Filter (LVF) from 7.7 to 14.1µ
seven Fixed Band Pass Filters 1.8, 3.3, 3.6, 4.0, 4.2, 4.5, and 4.7µ
Pump Flow Rate 15l/min
Analysis Time After power up: 20 seconds minimum; three minutes maximum
Alarms User Definable
Readout 8 line x 40 Character LCD
Response time 18 seconds to 90% of final reading
Pathlength 0.5m & 12.5m
Sample Cell Vol. 2.23 liters
Battery Internal, Rechargeable NiCad. 7.2 V nominal; 5.7 Ah capacity.
Discharge time 4 hrs; recharge time 4 to 6 hrs.
Output 0-1VDC, Parallel, Serial
Dimensions Approximately 553mm (21.8in) wide x 365 mm
(14.4 in) high x 193 mm (7.6 in) deep
Mass Approximately 10 kg (24 lbs.)
Intrinsic Safety User specified models are certified for CENELEC, Groups IIC, Zone 1and 2;
Certifications ETL (Class I, Div. 1. Groups B,C & D,Temp. Class T4)
ETL-C (Class I, Div. 1. Groups B,C & D,Temp. Class T4)
CENELEC (EEx ib d IIB + H2 T4)
Accessories
Leak Detection/Sampling Wand P/N CR014QC
15 3/4” (40cm) long, and is composed of anodized aluminum tubing and chemically
stable plastic.
Transportation / Carrying Case P/N CR013XM
Wheeled case with telescoping handle doubles as a sturdy shipping case which will
hold a spare battery, battery charger, cables, sample wand, carrying strap and filters.
Field Performance Check Kit P/N CR014LG
8 West Forge Parkway, Franklin, MA 02038 USA
tel: (508) 520-0430 fax: (508) 520-1460
thermo@thermoei.com www.thermoei.com
ISO-9001 Certified
MIRAN is a registered trademark of Thermo Environmental Instruments Inc. Doc# 0011