Audi A6 4B C5 - Hofele

Audi A6 4B C5
article
number
HF 7551
HF 7551-P
HF 7552
HF 7456-
RS4
HF 7262
HF 7555
HF 7052-S4
HF 7052-P-
S4
HF 7052-
RS4
HF 7052-P-
RS4
HF 7052-
RS4 B
HF 7052-P-
RS4 B
declaration mat. unit
AUDI A6 4B C5 (05.2001 - 03.2004) Limousine + Avant
Facelift-model. Also suitable for US - models.
- Not for cars with 8-cylinder-motor and not for Audi S6 & RS6.
See separate offer for this cars -
"Single-Frame" front bumper in RS4-Look
for cars with or without headlight washer system & without Parktronic (PDC)
PKG 1 set
"Single-Frame" front bumper in RS4-Look
for cars with or without headlight washer system & with Parktronic (PDC) PKG 1 set
needed for HF 7551-P:
cable extension for the PDC sensors
Body kit parts & accessories
1 set
needed for HF 7551 und HF 7551-P:
"RS4" mesh for the fog lights, the OEM fog lights can be kept OEM 1 set
New: Additional light package for HF 7551 + HF 7551-P:
2x LED day driving lights with 5 LED, incl. cable set & holders.
The "RS4" mesh has to be cut to make the lights fit!
needed for cars without headlight washer system:
covers to seal the openings in the front bumper HF 7551 & HF 7551-P, incl.
glue
various front grills Typ S4 / RS4 for font bumper "EVO"
"Single-Frame" front grill "S4"
for HF 8051, incl. license plate holder for cars without PDC, OEM part
especially prepared for HF 8051
"Single-Frame" front grill "S4"
for HF 8051-P, incl. license plate holder for cars with PDC, OEM part especially
prepared for HF 8051-P
"Single-Frame" front grill "RS4", silver frame
for HF 8051, incl. license plate holder for cars without PDC, OEM part
especially prepared for HF 8051
"Single-Frame" front grill "RS4", silver frame
for HF 8051-P, incl. license plate holder for cars with PDC, OEM part especially
prepared for HF 8051-P
"Single-Frame" front grill "RS4", black frame
for HF 8051, incl. license plate holder for cars without PDC, OEM part
especially prepared for HF 8051
"Single-Frame" front grill "RS4", black frame
for HF 8051-P, incl. license plate holder for cars with PDC, OEM part especially
prepared for HF 8051-P
- 1 -
1 set
OEM 1 set
OEM 1 piece
OEM 1 piece
OEM 1 piece
OEM 1 piece
OEM 1 piece
OEM 1 piece

HF
97101614
HF
97101614
HF 9710174
HF 9205112
HF 7476
exhaust system
Duplex sports muffler with one oval tailpipe per side, oval tailpipes with
diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for
Audi A6 4B with 2WD & the following engine versions: 1.8, 1.8T, 2.0, 2.4,
1.9 TDI, (gasoline engine with 92, 96, 100, 110, 120 & 132 kW, Diesel engine
with 81, 85 & 96 kW) The muffler can be combined with the serial rear apron
but it has to be cut to make the tailpipes fit!
Duplex sports muffler with one oval tailpipe per side, oval tailpipes with
diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for
Audi A6 4B with 2WD & the following engine versions: 2.4, 2.7 T, 2.8, 2.5
TDI & 3.0 (gasoline engine with 120, 121, 125, 132, 142, 162 & 169 kW, Diesel
engine with 110, 114, 120 & 132 kW) The muffler can be combined with the
serial rear apron but it has to be cut to make the tailpipes fit!
Duplex sports muffler with one oval tailpipe per side, oval tailpipes with
diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for
Audi A6 4B with 4WD & the following engine versions: 1.8 T, 2.4, 2.5 TDI,
2.8, 4.2, S6 (gasoline engine with 121, 132, 142, 220 & 250 kW, Diesel engine
with 110 & 132 kW) The muffler can be combined with the serial rear apron but
it has to be cut to make the tailpipes fit!
wheels & chassis
E 1 piece
E 1 piece
E 1 piece
"Largo 20" designer wheel, colour: Brilliance Silver, size: 9J x 20", PCD:
5x112, CH: 57,1, offset 40, TÜV approved for the Audi A6 4B C5 with the tire
size 245/30 ZR 20 90Y. Wheel spacers have to be used to mount the wheels! alloy 1 piece
wheel spacers
for LARGO-20 wheels with tires 245/30 ZR 20 at front & rear axle
front axle: total 25 mm, each spacer 12,5mm thickness
rear axle: total 25 mm, each spacer 12,5mm thickness
incl. longer wheel bolts
Largo 20 wheel + tire
Largo 20 with quality tires completely mounted & balanced.
"SPYDER" Aluminum Wheel - Dynamic & Racelook
Design similar RS4-Look
1-part wheel with 8-double spokes and screw circle around.
Colour: black polished, sizes from 8J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List"
- 2 -
alloy
1 set
=
4 piece
alloy 1 piece

HF 29793-1
HF 29793-2
HF 29797-1
HF 29797-2
HF 29796-1
HF 29798-1
HF 29798-2
HF 29524-1
HF 29524-2
HF 29524-3
"PRADO" Aluminum wheel - Dynamic & Elegance
choice with or without INOX stainless steel lip
1-part wheel with 5-double spokes and screw circle around.
Colours: silver, black, white, black polished,
sizes from 8,5J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List"
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B Limousine / Sedan with 2WD from 1116 kg front axle weight, up to 169
kW (2.4 l - 3.0 l incl. TDI)
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B Limousine / Sedan with 2WD up to 1115 kg front axle weight, (1.8 l - 2.0
l incl. TDI)
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B Limousine / Sedan with 4WD up to 1115 kg front axle weight, (1.8 l - 2.0
l incl. TDI)
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B Limousine / Sedan with 4WD from 1116 kg front axle weight, up to 250
kW incl. S6
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B station wagon / Avant with 2WD up to 1115 kg front axle weight, (1.8 l -
2.0 l + 1,9 TDI)
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B station wagon / Avant with 4WD up to 1115 kg front axle weight, (1.8 l -
2.0 l incl. TDI)
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B station wagon / Avant with 4WD from 1116 kg front axle weight, up to
250 kW incl. S6
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 2WD and up to 1065 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 40mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 2WD and from 1066 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 40mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 2WD and up to 1065 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 40mm at rear axle
- 3 -
alloy 1 piece
St
St
St
St
St
St
St
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece

Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 2WD and from 1066 kg front axle weight,
HF 29524-4
without self-leveling
Lowering of approx. 30 - 70mm at front and 40mm at rear axle
HF 29524-5
HF 29524-6
HF 29524-7
HF 29524-8
HF 29482-1
HF 29482-2
HF 29482-3
HF 29482-4
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 2WD and up to 1110 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 30 - 60mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 2WD and from 1111 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 30 - 60mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 2WD and up to 1110 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 30 - 60mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 2WD and from 1111 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 30 - 60mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 4WD and up to 1110 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 25 - 40mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 4WD and from 1111 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 25 - 40mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 4WD and up to 1110 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 25 - 40mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 4WD and from 1111 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 25 - 40mm at rear axle
- 4 -
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece

Anti-Roll-Bars "Hofele Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A6 4B Limousine + Avant with 4WD / quattro
HF 33524-1
front axle d = 32mm, twofold adjustable, rear axle d = 22mm, twofold adjustable
HF 33524-2
HF 7472
HF 7476
Anti-Roll-Bars "Hofele Anti-Roll" - produced by DTM-Racing-supplier for
Hofele-Design
for A6 4B Limousine + Avant with 2WD
only front axle d = 32mm, twofold adjustable
wheel spacers for original wheels
front axle: total 10mm, each spacer 5 mm thickness
rear axle: total 10mm, each spacer 5 mm thickness
incl. longer wheel bolts
wheel spacers for original wheels
front axle: total 25mm, each space 12,5 mm
rear axle: total 25mm, each space 12,5 mm
incl. longer wheel bolts
- 5 -
alloy
alloy
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece
1 set
=
4 piece

AudI S6
article
number
HF 7551-V8
declaration mat. unit
AUDI S6 + A6 - 8-cylinder models, type 4B C5 (05.2001 - 2004)
Sedan + Avant - facelift-model - Also suitable for US - models.
- Not for cars with 4 + 6 -cylinder-motor. See separate offer for this cars -
HF 7551-
PV8
HF 7552
HF 7456-
RS4
HF 7262
HF 7555-
RS6
HF 7052-S4
HF 7052-P-
S4
HF 7052-
RS4
HF 7052-P-
RS4
"Single-Frame" front bumper in RS4-Look
for cars with or without headlight washer system and
without Parktronic (PDC)
Front bumper + bonnet extension piece + special glue + longer opener + fitting
instruction manual
"Single-Frame" front bumper in RS4-Look
for cars with or without headlight washer system and
with Parktronic (PDC)
Front bumper + bonnet extension piece + special glue + longer opener + fitting
instruction manual
needed for HF 7551-PV8:
cable extension for the PDC sensors
Body kit parts & accessories
needed for HF 7551-V8 und HF 7551-PV8:
"RS4" mesh for the fog lights, the OEM A6 fog lights can be kept, the OEM S6
fog lights cannot be kept!
light package for HF 7551-V8 + HF 7551-PV8:
2x LED day driving lights with 5 LED, incl. cable set & holders.
The "RS4" mesh has to be cut to make the lights fit!
needed for HF 7551-V8 & HF 7551-PV8, for cars with & without headlamp
washer system:
covers to seal the openings in the front bumper HF 7551-V8 & HF 7551-PV8,
incl. glue
various front grills Typ S4 / RS4 for font bumper "EVO"
"Single-Frame" front grill "S4"
for HF 8051, incl. license plate holder for cars without PDC, OEM part
especially prepared for HF 8051
"Single-Frame" front grill "S4"
for HF 8051-P, incl. license plate holder for cars with PDC, OEM part especially
prepared for HF 8051-P
"Single-Frame" front grill "RS4", silver frame
for HF 8051, incl. license plate holder for cars without PDC, OEM part
especially prepared for HF 8051
"Single-Frame" front grill "RS4", silver frame
for HF 8051-P, incl. license plate holder for cars with PDC, OEM part especially
prepared for HF 8051-P
- 6 -
PKG 1 set
PKG 1 set
1 set
OEM 1 set
1 set
OEM 1 set
OEM 1 piece
OEM 1 piece
OEM 1 piece
OEM 1 piece

HF 7052-
RS4 B
HF 7052-P-
RS4 B
HF 7554
HF 7556
HF 9710174
HF 9205112
HF 7476
HF 29797-2
"Single-Frame" front grill "RS4", black frame
for HF 8051, incl. license plate holder for cars without PDC, OEM part
especially prepared for HF 8051
"Single-Frame" front grill "RS4", black frame
for HF 8051-P, incl. license plate holder for cars with PDC, OEM part especially
prepared for HF 8051-P
Required for Audi US-model cars
OEM 1 piece
OEM 1 piece
Needed for HF 7551-V8 & HF 7551-PV8:
Euro front bumper support for left & right side OEM 1 set
Needed for HF 7551-V8 & HF 7551-PV8:
Euro front alloy crash bar
exhaust system
Duplex sports muffler with one oval tailpipe per side, oval tailpipes with
diameter of 157 x 92 mm, tailpipes crocked on the outside, edges raised, for
Audi A6 4B with 4WD & the following engine versions: 1.8 T, 2.4, 2.5 TDI,
2.8, 4.2, S6 (gasoline engine with 121, 132, 142, 220 & 250 kW, Diesel engine
with 110 & 132 kW) The muffler can be combined with the serial rear apron but
it has to be cut to make the tailpipes fit!
wheels & chassis
"Largo 20" designer wheel, colour: Brilliance Silver, size: 9J x 20", PCD:
5x112, CH: 57,1, offset 40, TÜV approved for the Audi A6 4B C5 & S6 4B C5
with the tire size 245/30 ZR20 90Y & 255/30 ZR20 92Y. Wheel spacers have to
be used to mount the wheels!
wheel spacers
for LARGO-20 wheels with tires 245/30 ZR 20 at front & rear axle
front axle: total 25 mm, each spacer 12,5mm thickness
rear axle: total 25 mm, each spacer 12,5mm thickness
incl. longer wheel bolts
Largo 20 wheel + tire
Largo 20 with quality tires completely mounted & balanced.
"SPYDER" Aluminum Wheel - Dynamic & Racelook
Design similar RS4-Look
1-part wheel with 8-double spokes and screw circle around.
Colour: black polished, sizes from 8J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List"
"PRADO" Aluminum wheel - Dynamic & Elegance
choice with or without INOX stainless steel lip
1-part wheel with 5-double spokes and screw circle around.
Colours: silver, black, white, black polished,
sizes from 8,5J x 18" to 9,5J x 19"
Prices and declarations: See at "Hofele-Wheel List"
sport springs for front & rear axle, lowering of approx. 40mm for
A6 4B Limousine / Sedan with 4WD from 1116 kg front axle weight, up to 250
kW incl. S6
- 7 -
OEM 1 piece
E 1 piece
alloy 1 piece
alloy
1 set
=
4 piece
alloy 1 piece
alloy 1 piece
St
1 set
=
4 piece

sport springs for front & rear axle, lowering of approx. 40mm for
HF 29798-2
A6 4B station wagon / Avant with 4WD from 1116 kg front axle weight, up to
250 kW incl. S6
HF 29482-2
HF 29482-4
HF 7472
HF 7476
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B Limousine / Sedan with 4WD and from 1111 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 25 - 40mm at rear axle
Height-adjustable coil-overs "Hofele-Mono-Tube" - produced by DTM-
Racing supplier for Hofele-Design
for A6 4B station wagon / Avant with 4WD and from 1111 kg front axle weight,
without self-leveling
Lowering of approx. 30 - 70mm at front and 25 - 40mm at rear axle
wheel spacers for original wheels
front axle: total 10mm, each spacer 5 mm thickness
rear axle: total 10mm, each spacer 5 mm thickness
incl. longer wheel bolts
wheel spacers for original wheels
front axle: total 25mm, each space 12,5 mm
rear axle: total 25mm, each space 12,5 mm
incl. longer wheel bolts
- 8 -
St
alloy
alloy
1 set
=
4 piece
1 set=
4 piece
1 set=
4 piece
1 set
=
4 piece
1 set
=
4 piece