Engineering Lab Report Template - file format - University of Nicosia

More documents

Recommendations

Info

So, as an example consider the results in table 1. Using equation 5, one can calculate that the % error between calculated and measured VR2 (volts) V when Vs is 10 volts is: 3.85 − 3.76 % error of VR ( V 10) 100% 2.33% 2 s = = × = 3.85 4.50 4.00 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 R2 Sample Graph for table 1 0.00 2.00 4.00 6.00 8.00 10.00 12.00 Vs (volts) Calculated Measured Figure 3. Graph of contents of table 1. (captioning is always positioned below the figure) VR2, Imesh, PR2 12 10 8 6 4 2 0 Table 2 results 0 2 4 6 8 10 12 14 Vs Figure 4. Graph of table 2 VR2 Imesh PR2 6
PROBLEMS/QUESTIONS In this section, you MUST answer all problems and/or questions of the lab handout in a numbered fashion. Number the answers in the same order presented in the handout. RECOMMENDATIONS and CONCLUSIONS Recommendations should be made for the improvement of the experiment contact. These can suggest possible changes, modifications of the experimental setup and generally aim towards improving accuracy. Conclusions indicate the significance of the findings, their usefulness and possible advantages or limitations. Potential applications of the results may also be presented. If results do not agree with theory, you should provide a deeper analysis of what you believe went wrong. 7
Page 1 and 2: e.g. “Frequency Response of the R
Page 3 and 4: OBJECTIVES Under “Objectives” y
Page 5 and 6: • Dual Trace Oscilloscope (Brand:
Page 7: Data discussion Discuss the obtaine

Engineering Lab Report Template - file format - University of Nicosia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?