TRANSPONDER GUIDE 2008 - STRATTEC Security Corporation

More documents

Recommendations

Info

On-BOaRD pROGRaM 9 2006 fORD fUSIOn 2006 MERCURY MIlan 2006 lInCOln ZEpHYR aDD KEY: (Must have two working original keys): 1. Insert the first previously programmed coded keys into the ignition. 2. Turn the ignition from the 1 (lOCK) position to the 3 (RUn) position. Keep the ignition in the 3 (RUn) position for at least 3 seconds, but no more than 10 seconds. 3. Turn the ignition to the 1 (lOCK) position and remove the first coded key from the ignition. 4. within 10 seconds of turning the ignition to the 1 (lOCK) position, insert the second previously coded key into the ignition. 5. Turn the ignition from the 1 (lOCK) position to the 3 (RUn) position. Keep the ignition in the 3 (RUn) position for at least 3 seconds, but no more than 10 seconds. 6. Turn the ignition to the 1 (lOCK) position and remove the second coded key from the ignition. 7. within 20 seconds of turning the ignition to the 1 (lOCK) position and removing the previously programmed coded key, insert the new unprogrammed key (new key/valet key) into the ignition. On-BOaRD pROGRaM 10 8 2008 CHRYSlER TOwn & COUnTRY van 2008 DODGE CHaRGER 2008 DODGE MaGnUM 2008 JEEp COMManDER aDD KEY (Must have two working integrated keys): 1. Insert first working integrated key into the ignition switch and turn the ignition switch to the On position for at least 3 seconds, but no longer than 15 seconds. Turn the ignition switch to the lOCK position and remove the first key. 2. Insert the second working integrated key and turn the ignition switch to the On position within 15 seconds. after 10 seconds, a chime will sound and the vehicle Security alarm Indicator light will begin to flash. Turn the ignition switch to the lOCK position and remove the second key. 8. Turn the ignition from the 1 (lOCK) position to the 3 (RUn) position. Keep the ignition in the 3 (RUn) position for at least 6 seconds. 9. Remove the newly programmed coded key from the ignition. If the key has been successfully programmed, it will start the vehicle’s engine and will operate the remote entry system (if the new key is an Integrated Keyhead Transmitter). The theft indicator light will illuminate for 3 seconds and then go out to indicate successful programming. If the key was not successfully programmed, it will not start your vehicle’s engine and/or will not operate the remote entry features. The theft indicator light may flash on and off. wait 20 seconds and you may repeat Steps 1 through 8. If the failure repeats, bring your vehicle to your authorized dealer to have the new key(s) programmed. To program additional new unprogrammed key(s), wait 20 seconds and then repeat this procedure from Step 1. 2008 JEEp GRanD CHEROKEE 2008 CHRYSlER 300 3. Insert a blank integrated key into the ignition switch and turn the ignition switch to the On position within 60 seconds. after 10 seconds, a single chime will sound and the vehicle Security alarm Indicator light will stop flashing, turn on again for 3 seconds, and then turn off. The new integrated key is programmed. The Remote Keyless Entry (RKE) transmitter will also be programmed during this procedure. Repeat this procedure to program up to 8 keys.
OBP: ON-BOARD PROGRAMMING MAKE MODEL YEAR(S) SSC P/N CLONEABLE OBP# TOOL OE # EZ# A C U R A A U D I B U I C K t New part number for 2008 CL 1998-03 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 CSX (Canada) 2006 Dealer Key Integra 2000-01 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 MDX 2001-07 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 NSX 1997-04* 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 RL 1996-04* 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 RSX 2002-06 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 TL 1998-03 692246 Code-Seeker HD106-PT 692057 X Quick-Code HD106-PT5 TL 2004-07 5907552t Code-Seeker 35113-SEC TSX 2004-07 5907552t Code-Seeker 35113-SEC * NOTE: You must flash the immobilizer and then program the vehicle. A4/S4 2002-05 Dealer Key Code-Seeker HU66AT6 A6/S6/ALLROAD 2001-05 Dealer Key Code-Seeker HU66AT6 A8/S8 2003 Dealer Key Code-Seeker HU66AT6 TT Mid 2001-05 Dealer Key Code-Seeker HU66AT6 NOTE: The PIN numbers can be retrieved for some but not all AUDI’s with the Code-Seeker. Allure (Canada) 2005-08 691205 OBP-1 B107-PT 692138 X Quick-Code PT04-PT5 Enclave 2007-08 693126 OBP-1 12451816 5903089t OBP-1 12451816 LaCrosse 2005-08 691205 OBP-1 B107-PT 692138 X Quick-Code PT04-PT5 LeSabre 2000-06 690898 OBP-1 Code-Seeker B99-PT 692065 X Quick-Code B99-PT5 Lucerne 2006-08 693126 OBP-1 12451816 5903089t OBP-1 12451816 Park Avenue 1997-05 690552 OBP-1 Code-Seeker 88891799 B97-PT 690556 OBP-1 88951932 B103-PT 692064 X Quick-Code B97-PT5 Rainier 2003-05 690898 OBP-1 Code-Seeker B99-PT 692065 X Quick-Code B99-PT5 APPLICATION CHART 9
Page 1 and 2: TRANSPONDER GUIDE 2008 AS6844-01/08
Page 3 and 4: OpTIOnal CODE-SEEKER SOfTwaRE avaI
Page 5 and 6: On-BOaRD pROGRaM 3 aDD KEY (require
Page 7: On-BOaRD pROGRaM 7 2001+ fORD fOCUS
Page 11 and 12: OBP: ON-BOARD PROGRAMMING MAKE MODE
Page 23 and 24: nEw KEY BlanKS 5907552 aCURa 692933
Page 25 and 26: KEY BlanKS 692395 82 GRv 693356 82
Page 27 and 28: kEY blANkS 692064 88 GRv OlDSMObIlE

TRANSPONDER GUIDE 2008 - STRATTEC Security Corporation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?