12 Needle 4 Head embroidery machine - Borduurmachine-Service.nl
12 Needle 4 Head embroidery machine - Borduurmachine-Service.nl
12 Needle 4 Head embroidery machine - Borduurmachine-Service.nl
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Increased productivity<br />
• Reduced downtime, with thread breakages and thread<br />
tangling prevented before they occur.<br />
Highly-sensitive upper thread breakage sensors which monitor<br />
lower thread breakages as well are equipped as standard, so that if<br />
a thread breakage occurs or bobbin runs out, it is detected straight<br />
away. This keeps downtime to an absolute minimum.<br />
Rotary hooks that reduce the load placed on the threads have been<br />
adopted. In addition, an optimized thread take-up mechanism has<br />
also been adopted to prevent thread breakages.<br />
A thread take-up cover is provided to accurately prevent the thread<br />
tangles around the take-up levers.<br />
Stable and attractive finishes are provided.<br />
The adoption of a thread take-up mechanism that has been optimized to provide the ideal thread tightness<br />
and a high-precision feed control mechanism provide stable seam tightness under an even wider range of<br />
conditions so that high-quality finishes can always be obtained. Newly-developed double-capacity rotary<br />
hooks ensure stable thread tightness, and correct thread tensions can be obtained for light through to<br />
heavy materials.<br />
Short thread remaining lengths<br />
The thread trimming knife is located as close to the needle plate as possible. The thread remaining length<br />
underneath the material is approx. 6 mm short. Because the thread remaining length is so short, the<br />
thread does not need to be manually trimmed.<br />
Low vibration and low noise<br />
A reduction in jump noise means that vibration has been greatly reduced, and at the same time operation<br />
is much quieter overall.<br />
Flexible response to customer needs (computer control type)<br />
• Machines can be combined to meet customer needs.<br />
A single computer can control maximum four units. These four units can be operated independently at the<br />
same time, which is ideal for large-variety small-lot production runs and for producing different items at the<br />
same time. It also allows productivity to be greatly increased.<br />
4 head and 6 head<br />
<strong>embroidery</strong> <strong>machine</strong>s can<br />
also be combined, so that<br />
you can select the number<br />
of heads -- for example, 8<br />
heads (4 + 4), 10 heads (6<br />
+ 4) or <strong>12</strong> heads (6 + 6) --<br />
in accordance with your<br />
needs.<br />
Layouts can use factory space more efficiently 1 PC controls 4 units<br />
PC<br />
PC<br />
PC<br />
PC<br />
PC<br />
Thread stud base<br />
Rotary disk