Download our latest product catalogue - Hi Tech Plastics

Innovators of Marine Products
and General Rotational
Moulding specialists
LEADERS in NEW PRODUCT
DESIGN and PRODUCTION
MANUFACTURERS OF MARINE PRODUCTS
Hi Tech Plastics 2002 Ltd and Marine Tech Industries
10 Clow Place, PO Box 5303, Frankton, Hamilton 3242, New Zealand
Phone: +64 7 843 3343
Fax: +64 7 843 3346
email: info@hitechplastics.co.nz
www.hitechplastics.co.nz, and mti.co.nz

5000 SEAT: S01
Large fully upholstered seat
Polyethylene Shell
(Can be sold separately)
550mm Wide
3000 SEAT: S02
Medium seat
Optional upholstery
550mm Wide
2000 SEAT: S09
Medium seat
Optional Upholstery
470mm Wide
HI TECH PLASTICS
BOLSTER: S011
A robust and comfortable sit down or stand and lean seat made to last.
Hinges and fixings made from 316 Stainless Steel.
New Zealand marine conditions.
(40 colours to chose from to suit your requirements).
1000 SEAT: S06
Small seat
Optional upholstery
Great for smaller boats
400mm Wide
1500 SEAT: S04
Medium seat
Optional Upholstery
Ideal for smaller boats
480mm Wide
DELUXE SEAT: SKD
Medium seat
Optional upholstery
550mm Wide
CRUISER SEAT: S03
Optional upholstery
Excellent back and
arm support
550mm Wide
1550 SEAT: S05
Same as 1500 Seat (480mm wide) but
complete with moulded swivel bracket
Optional upholstery.
Fits any 75mm Pedestal.
PACIFIC SEAT: SKP
Medium seat
450mm Wide
Aluminium Swivel: SW01
Heavy Duty reliable swivel.
Can be attached to all seats, via
moulded inserts for added
strength and reliability
360º Swivel

SKI BACK TO BACK: SB012
Large dry storage space, upholstery optional.
Ideal for ski boats.
1040L – 530W – 670H
UPHOLSTERY COLOURS
A wide range of colours
available to suit the decor of
your boat. All seats have the
option of being upholstered.
Allows for more comfort when
you are out on the water.
900L — 500W — 560H
Upholstery optional
All seats can be used as King Seat
Multiple combinations can be used
WIDE KING AND QUEEN: PD05
Removable Queen Seat Large dry storage area Moulded in floor.
Swivels, Powersliders and manualsliders and low-level sliders and
low-level pedestals can be added.
900L — 400W — 560H
Upholstery optional
All seats can be used as King Seat
Multiple combinations can be used
NARROW KING AND QUEEN: PD06
Removable Queen Seat Large dry storage area Moulded in floor.
Swivels, Powersliders and manualsliders and low-level sliders and
low-level pedestals can be added.
STANDARD BACK TO BACK: SB03
Large dry storage space, upholstery optional.
980L – 430W – 600H
REAR SEAT
Extra large storage space,
Upholstery optional
Four sizes to chose from
SR01: 1560L – 475D – 590H
SR02: 1370L – 440D – 590H
SR03: 1000L – 450D – 680H
SRO4: 880L – 430D – 580H

PYRAMID
PD03: 470H PD04: 580H
Multiple seat mounting options
including swivel, manualslider or
powerslider. Useful storage area.
FISH BINS WITH LIFT OUT INSERTS
FB01: Small 710L – 500W – 500D with one insert
FB02: Large 980L – 600W – 610D with two inserts
LBT01: 390L – 290W – 190D 15ltrs
LBT02: 450L – 380W – 300D 45ltrs
LBT03: 550L – 380W – 300D 55ltrs
LBT04: 680L – 380W – 300D 70ltrs
LBT05: 605L – 400W – 350D 75ltrs
LBT06: 680L – 400W – 350D 85ltrs
LBT07: 730L – 430W – 430D 125ltrs
LBT08: 1030L – 580W – 550D 300ltrs
ltrs are approximate only
SECTIONAL SEAT: SB01
Large dry easily accessible
storage space. Sold separately
as seat and base package
HITECH GAME SEAT: S07
Perfect for pulling in the big ones. Can be removable.
Seat and Pedestal packages available complete with or
without seat mounted Gimble.
Can be purchased separately. P.O.A
Lift out inserts for ease
of use. All bins come
complete with hinged
lids, bung, heavy duty
handles and stainless
fixing. Optional
upholstered squabs.
Multi purpose bin, seat
as well as storage bin.
Portable. All bins can be
purchased unsquabbed
P.O.A. All bins come
complete with hinged lids,
bung, heavy duty handles
and stainless fixings.
2 SIZES AVAILABLE 4 SIZES AVAILABLE
Upholstery made to suit boat colours.
MEDIUM SIZED SEAT
FISH BINS
SQB01: 550L – 380W – 300D 55ltrs
SQB02: 600L – 400W – 350D 75ltrs
SQB03: 730L – 430W – 430D 125ltrs
SQB04: 1030L – 580W – 560D 300ltrs
ltrs are approximate only
STORAGE LIVE BAIT TANKS
Available with or without lids and
pumps. Durable one piece moulded
plastic with no seams, complete
with Bung. Lids can be purchased
separately. Sizes as listed. Pumps
available for all Live Bait Tanks. Small,
Medium, and Large lids available:

DELUX BAIT BOARD: BB08
Complete with drain hole
and gutter around cutting surface.
720L – 440W – 50D
HIGH SIDED BAIT BOARD: BB12
Complete with gutter at rear and
drain hole. 90mm rear up stand.
600L – 400W – 100D at rear
600L – 400W – 50D at front
Dive Bottle Racks: DBR02/03
Available in triple and double racks
and black and white. Also great tuna
tube holders.
LARGE BAIT BOARD: BB04
Purchased with or without
transom mounting kit.
850L – 450W – 50D
LONG LINE BAIT BOARD: BB10
Multi purpose board purchased with
or without transom mounting kit or
rod holder mounts.
630L – 500W – 70D
BURLEY POTS: BP01 – BP04
Duck board mounted long or
short and transom mounted.
Muncher sold separately.
ANCHOR WELLS: AW01/07
Centre and side mount.
Available in various shapes
and sizes. P.O.A
2 SIZES AVAILABLE
SMALL PLAIN BAIT BOARDS:
Purchased with or without transom
mounting kit or rod holder mount.
BB01 600L – 400W – 50D
BB11 460L – 340W – 50D
Bait Board Mountings: BB06/07
Pictured transom mounts
and rod holder mount.
FOOTREST: FR1
Perfect for at the helm and steps
to the fly bridge. Durable and
easy to install.
TUNA TUBES: TT01/02
One piece moulded tube complete
with 25mm BSP male thread at
base. Available in black and white
and with or without GPH pump.
Sold individually or as package
deals. P.O.A.

Softrider Swivel Lock
Allows lockable height adjustment
and 360 degree swivel lock
adjustment. Made of heavy duty
plastic. Mounts easily to all
Hi Tech seats.
Marine Tech Industries specialise in the
manufacture of high spec boat seat pedestals, gas
powered, fixed and adjustable tables. Products
are manufactured in Aluminium or Stainless Steel
with a range of options, suitable for all areas of
the boating industry, from Powerboats to Luxury
Launches and Motor Yachts, and also Campervans.
See our superb range of Stainless Steel pedestals,
or custom – built with no compromise on finish and
quality, finished to suit your decor requirements.
MTI Softrider Pedestal
The Softrider is the ultimate in boating pedestals,
designed to give you the softest ride possible. Made from
marine grade aluminium extrusion which gives excellent
non – corrosive protection. It incorporates a unique feature
of gas powered height adjustment: by lifting the Softrider
handle up, you can raise and lower the pedestal height
four inches or 100mm to select the height that is just right
for you. The Softrider is available in heights from 400mm
height to 800mm height in nominations of 50mm. The
components below and others are compatible with all sizes
of the MTI Softrider.
Softrider Powerslider
The Powerslider is unique, it is fitted
to the Swivel Lock and allows you
to move your chair forward and aft
100mm (4 inches). The Powerslider
uses a unique gas ram and is
lockable in any position. Mounts
easily to all Hi Tech seats.
Softrider Manualslider
The Manual slider has the same
features as the Softrider Powerslider
but is adjusted manually and has
fixed locating positions. Mounts
easily to all Hi Tech seats.

MTI Fixed Pedestal
The Pedestal is made from marine grade aluminium
extrusion, which gives excellent non-corrosive
protection. The fixed pedestal is designed for maximum
stability with a specially designed base casting, into
which the aluminium tube is pressed. Fixed Pedestals
are available in heights from 200mm to 750mm in
50mm nominations.
MTI Fixed Pedestal
with Manualslider
MTI Fixed Pedestal
with Powerslider
Fixed Pedestal Swivel Lock
Allows 360 degree swivel lock adjustment. Made of
heavy duty plastic. Mounts easily to all Hi Tech seats.
MTI Fixed Pedestal Powerslider
The Powerslider is unique, it is fitted to the Swivel Lock
and allows you to move your chair forward and aft 100mm
(4 inches). The Powerslider uses a unique gas ram and is
lockable in any position. Mounts easily to all Hi Tech seats.
MTI Fixed Pedestal Manualslider
The Manual slider has the same features
as the Softrider Powerslider but is adjusted
manually and has fixed locating positions.
Mounts easily to all Hi Tech seats.
MTI Fixed Pedestal
with Swivel Lock

MTI Adjustable Table Pedestals
There are 2 types of MTI table pedestals including floor mounted
adjustable (Pictured left). Adjustable pedestal are gas assisted to
raise the table as required. There are various sizes available to suit
your requirements. Some require to be mounted through the floor.
Table pedestals range from 400mm high up to 820mm high in a
variety of options to suit your requirements. The MTI table pedestals
have a stroke height of 300mm and can come complete with a
Table Slider that has a Fore and Aft stroke of 300mm.
MTI Fixed Table Pedestal
Fixed table pedestals can be made to suit your required height
measurements.
Low Profile Pedestal:
Low Profile Pedestals are designed to fit onto existing fibreglass or
aluminium plinths. The pedestal can be fitted with your choice of:
Powerslider, Manualslider, Swivel Lock. Overall height is
from 145mm.
Low-Level Swivel with or without Slider
Low-Level Sliders are deigned to fit onto existing fibreglass
or aluminium plinths or Hi Tech King and Queen and Poly
Pyramids. They also have the option of being fitted with a Low
Level Swivel. The slider options are: Low Level Powerslider or
Low Level Manualslider.
Two models available are lockable at 90 degrees positions.
MTI Footrest
The Footrest is cast in aluminium and has the unique feature of
being spring-loaded. It can be clamped to the Softrider, fixed
pedestal or any 75mm tube. When the footrest is not in use, it folds
back against the pedestal.

MTI Voyager Luxury Seat
Shown here complete with Softrider Elite
Footrests with wooden insert. Available
as a Voyager Elite (with Headrest), or
Voyager (without Headrest). Various
pedestal and slider options available.
Omega Helm Chair Workmate Helm Chair
Can be used in conjunction
with all MTI components
HELM SEAT RANGE
MTI Voyager Low Back Helm Chair
Shown here complete with Elite Softrider,
Manualslider, and footrest, Various pedestal
and slider options available.
This Luxury Range has the following Standard options
Upholstered in Leather Hide or Marine Vinyl, Stainless Steel Frame, Reclining
seat back, Lift up arm rest. Various options Pedestal and Slider options available.
More Helm seats available please contact for more information.
Helmsman Deluxe
The perfect cost effective premium helm seat.
Frames made from 316 Stainless Steel and Injection Moulded Foam.
High-grade marine Vinyl made to suit your colour choice.
Perfectly suited with all Marine Tech Industries Softrider or Fixed
Pedestal range.

STAINLESS STEEL SLIDING
AND SWIVEL OPTIONS
Elite Softrider with
Wooden Inlay Footrest
Elite Softrider with Wooden
Inlay Footrest
Elite Softrider with
Manual Slider
Sliding and Swivel options available for
Elite Softrider, Fixed Pedestal and Table
Pedestals. Electric and manual sliders
available both with 150mm travel. Elite
and standard Stainless Steel footrests
available with or without wooden insert
or back brace for added strength
and durability.
Twin Helm Slider
The Twin Helm Slider is unique to Marine Tech and allows you
to mount two Helm Seats side by side, or to a bench seat
which is available in two sizes. Travel 180mm, width 900mm
(can be customised to suit width and Travel. P.O.A)
Electric Table Pedestal
with Slider
We can custom design to suit your
requirements on all pedestal systems.
Electric Table
Pedestal
Constructed from 316 series Stainless Steel with load bearing composite bushes. Electric height adjustment from
150mm (6’) of adjustment or 300mm (12’) of adjustment. Fore and aft electric slider, with travel of up to 150mm (6’)
and Swivel, lockable at 90° in both directions or at 180° as required.
The MTI Electric pedestal is available with Manual slider travel of up to 150mm (6’). Stainless Steel footrest, with
wooden insert optional for Electric Helm Pedestal, this also has vertical height adjustment. All pedestals can be
custom made to suit your individual requirements.

THE STAINLESS STEEL
PEDESTAL RANGE
MTI Softrider Elite Pedestal
The MTI Softrider Elite Pedestal is a unique design and is
constructed from 316 Stainless Steel and available in three height
options of 550mm, 600mm and 700mm. These are available with
Gas Spring assist height adjustment up to 140mm (5”) and Swivel
Lock with fore and aft adjustment which is lockable in any position.
The Stainless Steel footrests with wooden inserts are an option. All
pedestals are hand polished to mirror finish or finished to suit your
décor requirements.
MTI Fixed Pedestal
The MTI Fixed Pedestal range is constructed from 316 Stainless
Steel and available in different heights to suit your requirements.
The pedestal is available with a Swivel Lock system with fore and
aft adjustment and are lockable in any position. The Stainless steel
footrest with a wooden insert is available as an extra option. All
Pedestals are hand polished to a mirror finish or finished to suit your
décor requirements.
MTI Adjustable Table Pedestals
The MTI Adjustable Pedestals with electric or gas spring assist
height adjustment, with rise and fall of up to 300mm. The Pedestal
can be customised to increase tube diameter and the rise and fall
travel. Fixed height table pedestals are available, customized to
suit your requirements. A table slider to suit fixed and adjustable
tables is available with 300mm of travel, it can be either manually or
electrically adjusted. Please enquire about our unique Removable
Table System which allows the table to be removed, allowing
easier access to confined areas. Our classic Barstool can be
customized to your design. All pedestals are hand polished to
mirror finish, satin bead blasted or finished to suit your décor.

Other products from Hi Tech Plastics include Industrial Bin
lids for 1.5m, 3m, 4m front loader bins, custom made water
and effluent tanks, letter boxes, flower pots, tool boxes, and
mudguards 13 inch and 14 inch sizes available.
Hi Tech Plastics and Marine Tech Industries are a family
owned and operated business based in Hamilton,
New Zealand.
We are proud manufactures of quality New Zealand made
products using only the highest quality materials for our
products. We are suppliers to all of New Zealand’s major
boat manufacturers, marine dealers and chandlery shops.
We pride ourselves on customer satisfaction and have
very experienced and helpful staff. Our products can be
found in a diverse range of industries including Marine,
Industrial, Commercial, Farming, and Services. Hi Tech
Plastics are innovators in the rotational moulding industry
and new mould design is a speciality.
Moulding the future
Come in and see the friendly staff and showroom at
10 Clow Place, Frankton, Hamilton, New Zealand
or call us 0064 7 84 333 43
Visa & MasterCard accepted.
Freight to anywhere in New Zealand and aboard.
Hi Tech Plastics 2002 Ltd and Marine Tech Industries
10 Clow Place, PO Box 5303, Frankton, Hamilton 3242, New Zealand
Phone: +64 7 843 3343
Fax: +64 7 843 3346
email: info@hitechplastics.co.nz
www.hitechplastics.co.nz, and mti.co.nz