OPERATING INSTRUCTION FOR HEATING HOSES - Kletti GmbH

More documents

Recommendations

Info

PLACING <strong>INSTRUCTION</strong>S WRONG CORRECT Avoid diversions, for they may cause kinking Use a saddle-shaped device or a roll, and bending stress. each with the appropriate diameter. Any inappropriate installation makes Use a spiral heated hose suspension. the heated hose sag. Heated hoses mounted within a closed channel Heated hoses must not touch each other. or shaft will cause heat built-up. Sufficient ventilation is to be provided. 8
PLACING <strong>INSTRUCTION</strong>S WRONG CORRECT If e.g. powdery substances, adhesives, or other Constant cleaning and elimination of cause. thermo-insulating materials are spilled on heated hoses, those parts will overheat. Heated hoses bundling or embedding with contact Install heated hoses with sufficient spacing. will cause overheating of contact areas. With the mounting brackets, please do not squeeze the outer heat insulation onto the heating conductor during installation. This can cause damage of the protective layer, and may destroy the heated hose or damage the medium. Use a counter-wrench when installing to avoid twisting the heated hose! 9
Page 1 and 2: OPERATING INSTRUCTION FOR HEATING H
Page 3 and 4: CONSTRUCTION The thermal insulation
Page 5 and 6: COMMISSIONING Before putting the he
Page 7: PLACING INSTRUCTIONS WRONG CORRECT
Page 11 and 12: APPENDIX Handling of heated hoses w
Page 13 and 14: HOSE ACCESSORIES For connecting, pl
Page 15: QUALITY MANAGEMENT Safety, Quality

OPERATING INSTRUCTION FOR HEATING HOSES - Kletti GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?