Electronic control gear units - BAGelectronics.com

Performance characteristics
Electronic control gear units
for T5 fl uorescent lamps in Multi-Lamp technology
• Universal ECG in Multi-Lamp technology offering automatic
and exact lamp recognition and optimal drive for
T5 fluorescent lamps
• One luminaire becomes viable with different lamp
packages (e.g. T5: 35 W, 49 W, 80 W)
• Twingle- Technology: Operation with 1 or 2 lamps
possible
• High design flexibility thanks to reduced housing
dimensions
• Optimised warm start thanks to energy controlled preheating
for preserving the electrodes and for maximum
lamp life independent of the switching frequency;
starting time < 1 s
• Cut-Off technology: no heating current through the electrodes
during operation for optimised luminous efficacy
and minimised power loss
• Automatic safety switch-off in case of abnormal lamp
operation, e.g. defective electrodes and end of lamp life;
tested acc. to EN 61 347-2-3 + Test 2
• Automatic restart after lamp replacement
• For luminaires of protection class I and protection class II
• Constant lamp output independent of mains voltage
fluctuations
• Reliable lamp recognition and ignition even at low temperatures
of –20 °C
• Suitable for direct current operation and application in
emergency lighting installations : Conforms to requirements
for emergency lighting acc. to EN 61 347-2-3/J
• Energy efficiency index A2 BAT
• Conformance with international regulations regarding
safety and operation, electromagnetic compatibility and
immunity to interference
ECG model
Markings
7 4 110
9
ML-tec
Version Order no. Lamp
MLS80.1FR-11/220-240 10071608 1 x T5 28 W, 35 W
1 x T5 49 W, 54 W, 80 W
MLS80.1/54.2FR-11/220-240 10071609 1/2 x T5 28 W, 35 W, 49 W, 54 W
1 x T5 80 W
1/2 x TC-L 55W
MLS39.1-2FR-11/220-240 10092026 1/2 x T5 14 W, 21 W, 24 W, 39 W
1/2 x TC-L/F 18 W, 24 W, 36 W
1/2 x TC-L 40 W
Errors excepted. We reserve the right to make
alternations in the interest of improving our products. 1/4
www.BAGelectronics.com

Technical data
Electronic control gear units
for T5 fl uorescent lamps in Multi-Lamp technology
Mains voltage supply
Rated voltage range 220 V – 240 V
Max. admissible voltage range 198 V – 264 V
(continuous)
Frequency 0, 50 Hz ... 60 Hz
Battery operation
Voltage range for
198 VDC – 278 VDC
continuous operation
Lowest limiting value for 176 VDC
temporary operation
1)
Behaviour at mains overvoltage
Switch-off of the lamp(s) at approx. 320 VAC 2)
Overvoltage protection 350 VAC / 2 h
Leakage current < 0.5 mA / EVG
Ignition time of the lamp < 1.0 s
Behaviour in case
Switch-off of the lamp
of defective lamp
Automatic restart
yes
after lamp replacement
Max. temperature
+ 110 °C
at housing surface
(acc. EN 61 347-2-3/C)
Nominal service life 50.000 h with failure rate
≤ 10 % and operation at
tc = tc, max
100.000 h at tc = tc, max
- 10 K
Lamp and mains terminals for solid wire
Type 90°-connector with
push button
Wire cross section 0.5 mm2 – 1.5 mm2 Wire stripping length 7.5 mm2 – 8.5 mm2 Lamp wire lengths see “wiring diagrams“
1) Reliable lamp ignition only for ≥ 198 VDC
2) Lamp restart after mains voltage interruption
Admissible temperatures
Version Ambient (ta) Case (tc)
MLS 80.1FR - 25 °C ... + 55 °C 70 °C
MLS39.1-2FR - 20 °C ... + 55 °C 75 °C
MLS80.1/54.2FR - 20 °C ... + 55 °C 75 °C
Inrush current/Circuit breaker
Version typ. Ipeak /Δt No. of ECG at single-pole
circuit breakers
LS-Typ 10 A 16 A 20 A 25 A
MLS 80.1FR 45 A / 120 μs B 13 21 26 32
C 20 32 40 50
MLS39.1-2FR 39 A / 135 μs B 13 25 32 40
C 24 38 48 60
MLS80.1/54.2FR 45 A / 120 μs B 11 18 23 29
C 17 27 34 42
All data for Usupply = 230 VAC, mains impedance = 1 Ω
In case of multipolar CB the max. no. is reduced by 20 %
The max. number may differ depending on CB manufacturer. Please consider the
specifications of the manufacturer.
Basically, CB with C-characteristics are recommended to be used inlighting groups.
I[A]
I peak
½ x I peak
Errors excepted. We reserve the right to make
www.BAGelectronics.com 2/4
alternations in the interest of improving our products.
∆t
T

Operating data
Electronic control gear units
for T5 fl uorescent lamps in Multi-Lamp technology
Version Lamp System
rating
Input
current*
Operating
frequency
Power
factor
Lamp
power
Lamp
socket
a 6 b 4
EEI Approvals
W A kHz W
MLS80.1FR-11/220-240 1 xT5 28 W 32 0.15 > 90 0.97 28 G5 A2 BAT a, b
1 x T5 35 W 39 0.18 > 90 0.97 35 G5 A2 BAT a, b
1 x T5 49 W 53.5 0.24 > 75 0.97 49 G5 A2 BAT a, b
1 x T5 54 W 60 0.27 > 42 0.97 54 G5 A2 BAT a, b
1 x T5 80 W 86 0.37 > 41 0.97 80 G5 A2 BAT a, b
MLS80.1/54.2FR-11/220-240 1/2 x T5 28 W 32/64 0,15/0,28 67/63 0,93/0,98 28/57 G5 A2/A2 BAT a, b
1/2 x T5 35 W 39/80 0,18/0,35 66/62 0,95/0,99 35/73 G5 A2/A2 BAT a, b
1/2 x T5 49 W 55/104 0,24/0,45 57/59 0,97/0,99 51/98 G5 A2/A2 BAT a, b
1/2 x T5 54 W 60/113 0,26/0,48 47 0,98/0,99 55/107 G5 A2/A2 BAT a, b
1 x T5 80 W 86 0,36 46 0,99 79 G5 A2/A2 BAT a, b
1/2 x TC-L 55 W 56/105 0,25/0,43 47 0,98/0,99 52/98 2G11 A2/A2 BAT a, b
MLS39.1-2FR-11/220-240 1/2 x T5 14 W 17/33 0,08/0,15 98/86 0,9 14/28 G5 A2/ A2 BAT a, b
1/2 x T5 21 W 24,5/48 0,11/0,20 92/82 0,9/0,97 21/42 G5 A2/ A2 BAT a, b
1/2 x T5 24 W 28/54 0,12/0,23 67/66 0,92/0,97 24/48 G5 A2/ A2 BAT a, b
1/2 x T5 39 W 42/82 0,17/0,35 67/66 0,96/0,98 39/78 G5 A2/ A2 BAT a, b
1/2 x TC-L/F 18 W 19/35,5 0,09/0,15 66/67 0,9/0,94 16/32 2G10/ 2G11 A2/ A2 BAT a, b
1/2 x TC-L/F 24 W 27/50 0,12/0,23 67 0,92/0,97 22/44 2G10/ 2G11 A2/ A2 BAT a, b
1/2 x TC-L/F 36 W 34,5/69 0,14/0,29 67 0,94/0,98 32/64 2G10/ 2G11 A2/ A2 BAT a, b
1/2 x TC-L 40 W 43,5/88 0,20/0,38 67 0,96/0,99 40/80 2G11 A2/ A2 BAT a, b
* at UMains = 230 VAC
Errors excepted. We reserve the right to make
alternations in the interest of improving our products. 3/4
www.BAGelectronics.com

Dimensions
Wiring diagrams
MLS80.1FR
1
2
3
4
keep lamp wires as short as possible
Wire lengths terminal 1, 2: max. 1.0 m
Wire lengths terminal 3, 4; 5, 6: max. 2.0 m
Electronic control gear units
for T5 fl uorescent lamps in Multi-Lamp technology
X M
MLS39.1-2FR / MLS80.1/54.2FR
1
2
3
4
5
6
X
1
2
3
4
5
6
7
ZM
Y Z
One-lamp operation
1-lampiger Betrieb
Version X XM Y Z ZM Weight
mm mm mm mm mm kg
MLS 80.1FR 280 265 30 21 8.5 0.23
MLS39.1-2FR 280 265 30 21 8.5 0,22
MLS80.1/54.2FR 280 265 30 21 8.5 0,24
Conformance with regulations
EN 61 347-1
EN 61 347-2-3
General and safety requirements
1
2
EN 61 347-2-3/C
3
4Requirements
for thermally protected ballasts
EN 61 342-2-3/J
5
6Particular
additional safety requirements
for a.c./d.c. supplied electronic ballasts for
emer gency lighting
EN 60 929 Performance requirements
EN 50 294 Measurement method of total input power
of ballast-lamp circuits
EN 61 000-3-2 Limits for harmonic current emissions
EN 61 000-3-3 Limitation of voltage fluctuations and flicker
General EMC immunity:
EN 61 000-4-2 Electrostatic discharge
EN 61 000-4-3 Radiated, radio-frequency, electromagnetic field
EN 61 000-4-4 Electrical fast transient/burst
EN 61 000-4-5 Surge
EN 61 000-4-6 Conducted disturbances, induced by radiofrequency
fields
EN 61 000-4-8 Power frequency magnetic field
EN 61 000-4-11 Voltage dips, short interruptions and voltage
variations
EN 61 547 EMC immunity: equipment for general lighting
purposes
EN 55 015 Radio disturbances, frequencies < 300MHz
(CDN method)
Environmental tests for mechanical capacity:
IEC 60 068-2-6 Test Fc: vibrations (sinusoidal)
IEC 60 068-2-27 Test Ea: shock and bump
IEC 60 068-2-29 Test Eb: shock and bump
Quality management certifi ed according to ISO 9001
BAG electronics GmbH
Kleinbahnstrasse 27 • 59759 Arnsberg/Germany · info@BAGelectronics.com • Phone +49 2932 9000-9800 • Fax +49 2932 9000-9796 MLS-MLtec-T5-evo2_EN(120223)
Errors excepted. We reserve the right to make
www.BAGelectronics.com 4/4
alternations in the interest of improving our products.