datasheet ENFLO 0110 - Enflo Windtec

datasheet ENFLO 0110
Operating data
Rated power 1 kW
Maximum power output 1,5 kW
Rated wind speed 12,5 m/s
Cut-in wind speed approx. 3 m/s
Cut-out wind speed none
rOtOr
Diameter 1,10 m
Swept area 0,95 m 2
Number of blades 5
Rotation speed max. 1,000 rpm
Material PA / GRP
diffusOr
External diameter 1,53 m
Depth (diffuser+Fowler flap) 0,69 m
Material GRP / aluminium
Yaw cOntrOl
Type self-aligning by means of diffuser / tail vane
Power transfer rotary transformer
gear mechanism
Type gearless
ENFLO 0110
BENEFITS
• Low turbine price per kW
• Considerably smaller turbine for the same rated
capacity
• Higher efficiency, i.e. better wind energy utilisation
• Low noise emissions
• No „disco effect“ (stroboscopic reflection of sunlight)
• No danger of falling ice
• Can be installed in many urban localities
• Low installation costs
• No maintenance costs
Your specialist dealer
cOmmercial eXample:
Feed-in to private power supply
Rotor and generator
Inverter
Rotor und Generator
Wechselrichter
Distribution cabinet
Private power supply
Electrical appliances
windtec
Wärmepumpe
generatOr
Type permanent magnet synchronous generator
Voltage max. 400 VAC
Protection class IP 55
cOntrOl sYstem
Control under normal conditions characteristic curve-controlled power regulation.
Control under storm conditions power limitations by means of mechanical pitch
control (blade angle adjustment)
inverter
Operating modes grid feed-in; optional stand-alone operation,
battery
Rated output 230 V
Frequency 50 Hz
Protection class IP 65
Power supply monitoring in accordance with VDE 126-1-1
Turbine adjustment polynominal head curve
AC output connection monophase inclusive revolute joint
tOtal weight
minus mast and inverter approx. 75 kg
Version 0110.12092011. Technical changes reserved. Valid from 09/2011
Light
Plug
private hOuse eXample:
Water heating
Inverter
Rotor and generator
Hot water tank
WindTec Systems AG | Löwenstrasse 16 | 8280 Kreuzlingen | Switzerland | info@enflo-windtec.ch | www.enflo-windtec.ch
Cartridge heater
windtec
The future is ours ENFLO 0110

x2,5
increased perfOrmance
thanks to the aerodynamic
housing on the ENFLO turbine
ENFLO 0110
The ENFLO 0110 is the next generation of innovative wind
turbines from WindTec Systems AG. Reduce your energy
costs by generating your own electricity from wind
power.
The aerodynamic housing on the ENFLO turbines
enables energy utilisation up to 2.5 times that
with conventional wind turbines. This gives you
a highly efficient wind turbine with a small diameter
which is simple to install on the roof
of your house.
You can feed the power generated directly
into your household power supply or use it for
water heating. It enables temporary storage
of surplus energy when connected to a battery
or you can run a stand-alone operation in off-grid
locations.
private use
power supply for
• Small to medium-sized
residential properties
• Holiday homes
• Sailing yachts
• Water pumps
• Heat pumps
renewaBle energY generatiOn –
a success stOrY
diverse applicatiOn OptiOns
• Grid feed-in
• Water heating
Optional operations mode
• Storage of excess energy in a battery system
• Stand-alone operation in off-grid locations
• UPS (uninterruptible power supply)
cOmmercial use
power supply for
• Small to medium-sized
commercial properties
• Motorway signage
• Mobile phone masts
• Weather stations
• Observation stations
Rated capacity
1 kW
Maximum power output 1,5 kW
Rotor diameter 1,10 m
External diameter 1,53 m
Diffuser depth 0,69 m
ENFLO 0071 received the
if gold award, March 2006