Lighting Control Systems Helio Lighting Management System

Lighting Control Systems Helio Lighting Management System
LRC 5040/10 Dimensions in mm
LRC 5042
LRC 5048
158
60
125
220
54
152.6
51.3
175
407 62
LRC 5042
Helio light controller with two
separately controlled outputs and
one interface for standard
movement, light and infrared
sensors.
The outputs are able to switch
and regulate lighting loads up to
5A.The outputs and Lon bus
have screw connections, the
sensor interface is connected via
RJ-12 plug.
200
LRC 5040/10
Helio light controller with single
channel for switching and
regulating lighting loads up to 5A,
and providing a sensor interface
for standard IR receivers,
pushbutton interface units,
movement detectors, and light
sensors.
Type
LRC5040/10
Type
LRC5042
LRC 5048
Helio light controller with eight
separately controlled outputs and
two interfaces for standard
movement detectors, light sensors
and pushbutton switches.
The outputs are able to switch
and regulate lighting loads upto
5A.The unit has a maximum total
rating of 16A. Each output has a
6-pole Wieland socket (GST) that
includes a maintained live for
power supply to batteries in
emergency luminaires.
Battery performance can then be
tested by interrupting the
maintained power supply at
prescribed intervals.
Type
LRC5048

Lighting Control Systems Helio Lighting Management System
LRI 5133/10
Mounting plate
Mounting ring
LCU 5305
LCU 5315
47
105
105
∅ 75
∅ 113
∅ 99
∅ 116
∅ 95
Dimensions in mm
60
60
30
60
90
90
6 52
LRI 5133/10
Helio multi-sensor with movement
detector, light sensor, and infrared
receiver used for remote and
automatic control of lighting,
HVAC and sun blind functions in
integrated room control
applications.The IR receiver can be
combined with hand-held and wall
transmitters for remote control
operations and with wall
transmitters with built-in
Mounting plate for surface
mounting of LRI 5133.
This plate is packed together with
the sensor itself.
Mounting ring for recessed
mounting of LRI 5133.
This ring is packed together with
the sensor itself.
temperature sensors for automatic
temperature control.
Units are connected directly to a
LonWorks ® bus cable for network
communication and power supply.
Their functional behaviour can be
adapted by downloading project
specific software over the bus.
Type
LRI5133/10
LCU 5305
Helio digital I/O module providing
a simple dry contact interface to
and from various systems.
The unit has 2 inputs and 2
outputs.
Type
LCU5305
LCU 5315
Helio system clock providing a
programmable switching schedule.
Type
LCU5315

Lighting Control Systems Helio Lighting Management System
LCN 5225
LCN 5235
LCN 5245
Unilon software
Unilon is a general configuration
tool for LonWorks ® based
systems. It offers a fully graphical
user interface and many other
features for commissioning of
LonWorks ® systems. Plug-ins for
the Helio controllers are
separately available. Each actual
214
214
Dimensions in mm
The Helio system is completed with a selection of the following General Purpose Components.
Infrared transmitters
IRC 2130
IRT 8050
IRT 8065
IRT 8070
Sensors
IRR 8124
IRR 8125
LRL 8101
LRM 8112
LRM 8115
LRI 8133
214
installation of one node in a
network requires a license, socalled
credit key. Unilon, the
Helio plug-ins and the credit
keys can be ordered in many
variations and combinations.
Contact your local Philips
Lighting Controls representative
for more information.
50
60
50
60
50
60
29
29
29
90
90
90
A fully functional demo and
training versions are available.
With the training version, it is
possible to install up to 32 nodes
for training or demonstration
purposes. Both versions are
delivered with all available Helio
plug-ins. Contact your local Philips
Lighting Controls representative
for more information.
Push-button interface
LCU 8020
Dimmers
LRD 8000
LRD 8010
Cables
LCC 8011
LCC 8012
LCC 8013
LCC 8014
LCC 8024
LCC 5301
LCN 5225
Helio bus power supply unit
providing a voltage of 42 V DC
and a current of 1.4 A to the
linkpower bus.
The bus voltage and current is
used by devices not connected to
the mains or auxiliary power
supplies - Helio sensors, system
clocks and digital I/Os.
Type
LCN5225
LCN 5235
Helio bus power supply/repeater
regenerating bus communication
and providing power to the bus.
Type
LCN5235
LCN 5245
Helio bus power supply/router
repeater regenerating and
managing bus communication and
providing power to the bus.
Type
LCN5245
Handbooks
For both Unilon and Helio
handbooks are available. Contact
your local Philips Lighting
Controls representative for more
information and for availability in
your language