Rider s Manual R 1200 GS - A&S BMW Motorcycles
Rider s Manual R 1200 GS - A&S BMW Motorcycles
Rider s Manual R 1200 GS - A&S BMW Motorcycles
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8<br />
120<br />
z Maintenance<br />
with <strong>BMW</strong> Motorrad Integral<br />
ABS II OE<br />
Remove screw 1 and remove<br />
the ABS sensor from its bore.<br />
Raise front of motorcycle until<br />
the front wheel can turn freely.<br />
<strong>BMW</strong> Motorrad recommends<br />
the <strong>BMW</strong> Motorrad front-wheel<br />
stand for lifting the motorcycle.<br />
Install the front-wheel stand<br />
( 124).<br />
Release axle clamping screw 2.<br />
Remove quick-release axle 3,<br />
while supporting the wheel.<br />
Roll the front wheel forward to<br />
remove.<br />
Remove spacing bushing 4<br />
from the left-hand side of the<br />
front-wheel hub.<br />
Installing front wheel<br />
Possible malfunctions when<br />
ABS and ASC systems intervene<br />
if non-standard wheels<br />
are installed.<br />
See the information on the effect<br />
of wheel size on the ABS and<br />
ASC systems at the start of this<br />
chapter.<br />
Threaded fasteners not<br />
tightened to the specified
Change language