Rider s Manual R 1200 GS - A&S BMW Motorcycles

Self-diagnosis not
completed
The ABS warning light
flashes.
Possible cause:
The ABS function is not
available, because selfdiagnosis
did not complete. The
motorcycle has to move forward
a few metres for the wheel
sensors to be tested.
Pull away slowly. The ABS
warning light must go out within
a few metres.
If the ABS warning light continues
to flash:
Seek the advice of a specialist
workshop, preferably an authorised
BMW Motorrad dealer.
ABS deactivated
The ABS warning light
comes on.
Possible cause:
The rider has switched off the
ABS system.
with BMW Motorrad Integral
ABS II OE
Activating ABS function
( 59).
ABS fault
The ABS warning light
comes on.
Possible cause:
The ABS control unit has detected
a fault. The ABS function is
not available.
You can continue to ride the
motorcycle, but make due provision
for the fact that the ABS
function is not available. Bear
in mind the more detailed information
on situations that can
lead to an ABS fault ( 91).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ASC warnings
Mode of presentation
with Automatic Stability Control
OE
ASC warnings are indicated by
ASC symbol 2 or off-road ASC
symbol 3 in combination with
'General' warning light 1.
The detailed descriptions relating
to BMW Motorrad ASC start on
page ( 92), and you will find
3 33
z Status indicators