Download the OS Operator Catalog PDF - Giesse North America

GIESSE OS OPERATOR
Technical details
System Design for the OS
Operator
The OS Operator has been designed to
work with a vent-to-frame clearances
that allow for standard four bar hinges.
The ideal design utilizes an integral
groove on the vent with a flat surface on
the frame.
For a detailed review of potential applications,
please contact Giesse Engineering
for assistance.
Size Limitations
Overall size restrictions for windows utilizing
the OS Operator depend upon
many factors including the hinges utilized,
glass size, windload requirements,
and impact requirements.
Max and Min vent size
OS Operator mechanism 725
Code 02000 000
OS Operator mechanism 466,5
Code 02002 000 1
Code 02002 000 2
Test Results
The OS Operator has passed cycle testing
at 15,000 cycles for both an awning
and casement windows at AAMA’s
gateway sizes.
In addition, the use of a single cremone
handle in the OS Operator substantially
improves air and water performance.
Traditional systems with rotary
operators and multiple locks – penetrate
the frame with more and larger
openings. Systems designed with the
OS Operator can result in reduced air
infiltration and higher water performance
than these traditional systems.
1,6
+0,1
0
0
3 -0,1
L Max.
L Min.
0
-0,2
16,5 ÷ 18
+0,2
-0,1
1,8
15
+0,2
-0,1
20
0
4,5 -0,1
+0,1
3 0
15 ÷ 18,5
6
83/128" ÷ 181/256"
1/16"
15/128"
+ 1/256"
0
0
- 1/256"
Top hung durability test Test mechanism
"
9/128 0 - 1/128"
+ 1/128"
- 1/256"
151/256"
[mm] [inches]
Top Hung Side Hung
L
H
45/256"
15/128"
151/256" ÷ 93/128"
+ 1/128"
- 1/256"
101/128"
0
- 1/256"
+ 1/256"
0
1500 mm 2000 mm 900 mm 1600 mm
H Max.
L Max.
H Max.
59 1/16" 78 3/4" 35 7/16" 63"
800 mm 450 mm * 450 mm* 800 mm
31 1/2"
H Min.
17 22/32"
L Min.
17 23/32"
H Min.
31 1/2"
1500 mm 2000 mm 900 mm 1600 mm
L Max. H Max. L Max. H Max.
59 1/16" 78 3/4" 35 7/16" 63"
500 mm 450 mm * 450 mm* 500 mm
L Min. H Min. L Min. H Min.
19 11/16" 17 22/32" 17 23/32" 19 11/16"
* IF THIS DIMENSION IS