Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>LINEA</strong> <strong>3D</strong> <strong>HINGE</strong><br />
00568<br />
Functions<br />
Linea <strong>3D</strong> is the new offset hinge for door profiles with groove,<br />
adjustable in three directions, to ensure constant and perfect<br />
alignment of the main body of the hinge in any lateral adjustment<br />
position. The hinge mounts without any need for machining, using<br />
steel plates inserted into the groove.<br />
Finish<br />
Black anodized<br />
Packaging<br />
Box of 20 pieces<br />
Technical Features<br />
The hinge combines with the door and frame side hinge covers,<br />
available in all finish options.<br />
The lateral adjustment cartridge, which keeps the hinge bodies<br />
aligned even after lateral adjustment (a Giesse patent), is available in<br />
the high corrosion resistance GS Silver Plus finish.<br />
The hinge mounting plates, toothed to mount to both sides of the<br />
groove, ensure an excellent grip on the profile.<br />
The stiffening ribs of the plates ensure that they are not deformed<br />
when tightening the screws.<br />
The frame side hinge is equipped with supplementary reinforcing<br />
screws, to increase the unit's resistance to slipping.<br />
The thrust bearing between the frame and door side hinges is preassembled<br />
to the eccentric bush to facilitate installation.<br />
<strong>LINEA</strong> <strong>3D</strong> can be adjusted in three directions, after door installation:<br />
- lateral adjustment (±2 mm), done by setting the adjuster screw with<br />
a 4mm Allen key via the slot in the zamak cartridge.<br />
Giesse's patented adjuster ensures the hinge bodies are kept in line<br />
with each other.<br />
- vertical adjustment (-2/+4 mm), done with the door lift block (p/n<br />
00570, available separately), which mounts to the top door side<br />
hinge with self-tapping screws.<br />
The door is raised by adjusting the screw with a 4 mm Allen key.<br />
- pressure adjustment (± 0.5 mm), done by rotating the eccentric<br />
bush on the frame side hinge with special wrench p/n 03900.<br />
Parts<br />
Instructions sheet<br />
22<br />
22<br />
1.8÷ 2<br />
6<br />
>3.5<br />
37<br />
20<br />
15<br />
3.5÷ 4<br />
14<br />
18<br />
70<br />
70<br />
2<br />
4.5<br />
3<br />
3<br />
5<br />
146,5<br />
11.5<br />
21
00568 (segue)<br />
Materials<br />
Hinge bodies in black anodised extruded aluminium<br />
Lateral adjuster cartridge in zamak, GS Silver Plus finish<br />
Dia. 10 stainless steel hinge pin<br />
Dia. 5 stainless steel pivot<br />
Steel adjuster screw with Zn-Ni finish (very high corrosion resistance)<br />
Stainless steel mounting plates<br />
Stainless steel mounting and reinforcing screws<br />
Eccentric bush in acetal resin with pre-assembled stainless steel thrust<br />
bearing<br />
Nylon caps<br />
Load capacities<br />
120 kg with 2 hinges<br />
150 kg with 3 hinges<br />
CE Mark (En1935)<br />
0.5<br />
03900<br />
0.5<br />
2<br />
2<br />
4<br />
00570<br />
4<br />
2<br />
00589