downloadable - TE (PNG)

Guitar Accessories
PEDAL BOARD PB1000
Pedal board is sold without the pedals shown.
MIDI FOOT CONTROLLER FCB1010 0
• Ultra-flexible MIDI foot controller with 2 expression pedals
• 100 user-editable presets in 10 banks
• Two expression pedals with freely assignable MIDI channel,
controller number and range
• Five MIDI program change and two MIDI control value
commands c
per preset (simul taneously transmittable)
• MIDI M note-on commands for trigger and tap-tempo
applications
• Two programmable ¼" relay jacks, e.g. for amp
channel selection
• MIDI merge and SysEx backup and restore
• Easily programmable in a standing position
• Integrated power supply—no messy AC adapters
RACKTUNER BTR2000
• Multi-functional tuner including built-in microphone for use
with acoustic instruments
• Useful metronome, adjustable from 30 to 240 bpm with
audible and visual beat indicator. You can also work on-the-fly
with the manual TAP tempo function
• Integrated, switchable rack lights with high-power LEDs helps
illuminate your rack
• 11 different tuner modes (e.g. “chromatic”, “banjo” or open
tunings) based on 12 equally tempered tones
FOOT CONTROLLER FCV100
DUAL A/B SWITCH AB200 ULTRA-DI PRO DI4000
ULTRA-G GI100
• 2-channel 2-c footswitch
for stage and studio
applications
a
• Usable for all products
with external control
functions such as guitar
amps, am keyboards, rhythm
machines, machines lighting products, etc.
• Easily switch bbetween
two input signals
into one output or vice versa (e.g. switch between two guitars
using one amplifier or two amplifiers with one guitar)
• Programmable latching/non-latching modes selectable for
both channels
ULTRA-DI DI100
• Professional active
direct injection box
• Converts unbalanced line
inputs to balanced outputs
• Ground lift switch eliminates
typical ground loop problems
• Internal battery automatically
shuts off when phantom power is
connected
• Direct connection of amplifier outputs with ratings of up to
3,000-Watts
• Switchable input attenuation allows input levels up to +50 dB
• BEHRINGER OT-1 output trans former for full galvanic insulation
• Professional 4-channel active direct injection box
• Converts unbalanced line inputs to balanced outputs
• Extremely linear frequency response from 10 Hz to 50 kHz
• +20 dB gain switch for preamplification of low-level signals
• Switchable attenuation allows maximum input of +50 dB
• S/N ratio –95 dB, THD