Manual de instrucciones - Daga

12
ENGLISH
BASIC CHARACTERISTICS
The heated mattress pad that you have acquired incorporates the
new generation of controllers exclusive to the new and innovative
DAGA line with the additional functions:
• Selection of 4 heat settings.
• Selection of 3 operating times (2h, 6h and 8h).
• Automatic safety autostop: To avoid possible risks due to accidentally
leaving the heated mattress pad on for a prolonged amount
of time and without the autostop activated, an automatic safety
Autostop feature has been incorporated that activates after 12h
of non-stop operation, without the user having to touch the controller.
After activating this safety Autostop, the heated mattress
pad will disconnect from the power supply and the controller
will indicate this circumstance by lighting up the yellow Autostop
indicator light (D). To leave the Autostop mode, just press
any of the two controller keys on. The regulator will move to the
default mode (heat setting 1).
USAGE MODE
Before connecting the heated mattress pad to the power supply,
check its voltage. This should correspond with that on the product
label.
If your heated mattress pad comes with a detachable connection,
make sure that the controller corresponds to reference 23011. Look
on the back to find this number.
PILLOw AREA
Fig. 2
Spread out the heated mattress pad on top of the mattress, leaving
space for the pillow and then, put on the fitted sheet. Avoid wrinkles,
folds or creases and make sure the plug is on the upper side of the
bed. See figure 2.
CalientaCamas-ALL.indb 12 15/03/10 17:06