Manual de instrucciones - Daga
Manual de instrucciones - Daga
Manual de instrucciones - Daga
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
14<br />
ENGLISH<br />
TROUBLESHOOTING GUIDE<br />
The heated mattress pad is equipped with a safety system that prevents<br />
overheating by automatic disconnection.<br />
PROBLEM SOLUTION<br />
After the turning<br />
the pad on, the<br />
controller correctly<br />
configures heat<br />
setting 1, but the<br />
heated mattress<br />
pad does not heat<br />
up or does not<br />
get hot enough.<br />
The controller<br />
does not turn on<br />
when I move the<br />
si<strong>de</strong> On/Off switch.<br />
After turning it on,<br />
the control panel<br />
does not configure<br />
heat setting<br />
1 correctly and<br />
the heated mattress<br />
pad does<br />
not heat up.<br />
If you do not feel the heat of the heated mattress<br />
pad, cover it with a blanket, quilt or duvet,<br />
put the controller at the maximum position<br />
and wait 45 minutes. If this does not<br />
work, contact our authorized technical service<br />
center. Tests done with the heated mattress<br />
pad uncovered or outdoors are not reliable<br />
because they can give erroneous heat<br />
evaluations.<br />
Make sure the power supply is working and<br />
that the heated mattress pad is correctly<br />
plugged in.<br />
Check that the si<strong>de</strong> On/Off switch is in the “I”<br />
position. If the anomaly persists, please contact<br />
our authorized technical service center.<br />
The controller could have found an anomaly<br />
in the start-up and blocked the heated mattress<br />
pad’s operation for safety purposes.<br />
Turn the controller off and on again. If the<br />
anomaly persists, please contact our authorized<br />
technical service center.<br />
The heated mattress pad can reach temperatures between 40º and<br />
60º C on its highest setting. This data should serve as to gui<strong>de</strong>line.<br />
Monitoring is carried out in laboratories, according to the procedure<br />
in the UNE-EN 60335-2-17 directive.<br />
CalientaCamas-ALL.indb 14 15/03/10 17:06