STIHL RMA 370
STIHL RMA 370
STIHL RMA 370
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
During Charging Process<br />
The light emitting diodes glow<br />
continuously or flash to indicate the<br />
progress of charge.<br />
During charging the capacity that is<br />
currently being charged is indicated by a<br />
green flashing light emitting diode.<br />
0 - 20 %<br />
20 - 40 %<br />
40 - 60 %<br />
60 - 80 %<br />
80 - 100 %<br />
When the charging process is<br />
completed, the light emitting diodes on<br />
the battery go off automatically.<br />
If the light emitting diodes on the battery<br />
flash or glow red – see "If the red light<br />
emitting diodes glow continuously /<br />
flash".<br />
<strong>RMA</strong> <strong>370</strong><br />
3901BA016 KN<br />
During Operation<br />
The green light emitting diodes glow<br />
continuously or flash to indicate the state<br />
of charge.<br />
80 - 100 %<br />
60 - 80 %<br />
40 - 60 %<br />
20 - 40 %<br />
0 - 20 %<br />
If the light emitting diodes on the battery<br />
flash or glow red – see "If the red light<br />
emitting diodes glow continuously /<br />
flash".<br />
3901BA016 KN<br />
If the red light emitting diodes glow<br />
continuously / flash<br />
1 light emitting<br />
diode glows continuously<br />
red:<br />
4 light emitting<br />
diodes flash red:<br />
3 light emitting<br />
diodes glow continuously<br />
red:<br />
3 light emitting<br />
diodes flash red:<br />
English<br />
Battery is too hot 1)<br />
2) /cold 1)<br />
Fault in battery 3)<br />
3901BA017 KN<br />
Power tool is too<br />
hot – allow it to cool<br />
down.<br />
Fault in power tool<br />
4)<br />
1) During charging process: Charging<br />
process starts automatically after<br />
the battery has cooled down /<br />
warmed up.<br />
17