Vaporflex - M6 Boutique

02Centrixx_Retro_gb.book Seite 26 Freitag, 16. Mai 2008 12:40 12
2 Unpacking and connecting
1
26
5
4 3
2
1
2
Fig. 4
Fig. 5
4. Push the floor nozzle with the jointed
connection(Fig. 4/1) onto the lower end of the extension
tube (Fig. 4/2).
5. Push the accessories mount (Fig. 5/1) onto one of the
extension tubes (Fig. 5/2). Then push both round
brushes (Fig. 5/3-4) and the jet nozzle (Fig. 5/5) on to
the accessories mount.
Your steam cleaner is now ready to use.
2.3 Using the accessories Together with the floor nozzle just installed, you can
expand the range of functions of your steam cleaner with
other nozzles. If necessary, you can also vary the number
of extension tubes used.
The following accessories are included in the scope of
delivery:
- Jet nozzle (Fig. 1/4)
Use this to clean hard-to-reach places.
- Nylon brush (Fig. 1/5)
Use this to intensively clean sensitive surfaces and to
clean stubborn dirt marks on carpets.
- Brass brush (Fig. 1/6)
Use this to intensively clean non-sensitive, and
scratch resistant surfaces.
- Window wiper (Fig. 1/28)
Use this like a wiper (from above to below) for
cleaning glass and other smooth surfaces.
2
- Cleaning cloth (Fig. 6)
2
Use the cleaning cloth together with the floor nozzle
to clean smooth surfaces. Secure the cleaning coth
(Fig. 6/1) to the floor nozzle using the clamps
(Fig. 6/2).
1
Fig. 6