Operator's Manual - ManageMyLife

KNOW YOUR PRESSURE WASHER
ii--!-!l .. Read Compare the the Operator's illustrations Manual with your and safety pressurerules washer before to familiarize operating yourself pressure with the washer. locations of various
controls and adjustments. Save this manual for future reference.
Spray Gun ProjectPro TM Nozzles
Model Data DecaJ
Nozzle Extension
with Quick Connect
High Pressure
Hose
RecoiJ Starter
Fuel Cap
Oil Fill Cap and Dipstick
Air FiJter
Throttle Control Lever ---_=---_
Water inlet
High Pressure
Outlet
Choke Lever
Detergent Pick-Up
Tube and Filter
Pump equipped with
Automatic Cool Down System
Air Filter -- Protects engine by filtering dust and
debris out of intake air.
Automatic Cool Down System -- Cycles water
through pump when water reaches 125°=155°F. Warm
water wii[ discharge from pump onto ground. This
system prevents internal pump damage.
Choke Lever -- Used to help start a cold engine.
Detergent Pick-Up Tube and FHter = Use to draw
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap =Fii[ engine with regular unleaded fuel here.
High Pressure Hose = Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet = Connection for high pressure
hose.
Model Data Decal = Provides model and serial number
of pressure washer. Please have these readily available
when calling for assistance.
Nozzle Extension with Quick Connect -- Allows you
to switch between four different nozzles.
OH Fill Cap and Dipstick = Check and fill engine with
oil here.
ProjectPro TM Nozzles -- Detergent, Max, General,
and Delicate nozzles: for various cleaning applications.
Pump = Develops
high pressure water.
Recoil Starter = Used for starting the engine
manually.
Spray Gun = Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Throttle Control Lever = Sets engine in starting
mode for recoil starter and stops running engine.
Water [nlet= Connection for garden hose.