DEE Blutdruck-Messgerät HGN - Medisana

GB5 Memory5.1Displayingstored resultsUp to 60 measurements (blood pressure and pulse with time and date) may be stored in each ofthe blood pressure monitor’s two memories. The measured values are stored automatically. Pressthe MEM button to call up the measured values stored. The unit displays the memory set (U1or U2). Pressing the START button switches to the other memory. The values of the mostrecently saved measurement (memory location number e.g. “01”) including the flashing bloodpressure indicator are displayed after pressing the MEM button .Repeatedly pressing the MEM button displays the respective values measured previously. Inmemory recall mode the unit switches off automatically after approximately 120 seconds if the lastentry has been reached and the MEM button has been pressed once more. Memory recall modecan be exited at any time by pressing the START button , which will also switch the unit off.If all 60 memory locations in a memory are occupied, a new measured value is saved whilst theoldest value is deleted.5.2DeletingmemoryIf you are in memory recall mode, press and hold the MEM button for approximately 8 seconds.All measured data stored will be deleted automatically after three beeps. Only noughts will beshown on the display instead of the measured values.30