16 - ToolSpann

ROSCADOR CON COMPENSACIÓN DEL PASO DE LA ROSCAsujeción con pinzas 6499 (ER) y refrigerante por el interiorTAPPING HEAD WITH AXIAL COMPENSATIONhold tape with DIN 6499 (ER) collets and with inner coolantDIN 69871-A11/13.610Compensación a la compresión (C) y a la tracción (T).Posibilidad de anular la compresión con el anillo (A).Control de la profundidad de roscado.Refrigeración por el centro.Compensation in compression (C) and tension (T)Compression can be blocked by turning the rear ring (A)Control of threading depth.Central coolant supply.REF. 11.610KISOAmmDmmCmmTmm11.610.30.1230ER 16M3-M1299285,56,080.493.1089.202.1011.610.40.1211.610.40.2011.610.40.3340ER 16ER 25ER 40M3-M12M4-M20M8-M331001251412842635,510,510,06,07,510,080.493.1080.493.1680.493.2689.202.1089.202.1689.202.2611.610.50.1211.610.50.2011.610.50.3350ER 16ER 25ER 40M3-M12M4-M20M8-M331001341502842635,510,510,06,07,510,0* SE SUMINISTRA CON LLAVE / * SUPPLIED WITH WRENCH80.493.1080.493.1680.493.2689.202.1089.202.1689.202.26REF. 13.610KISOAmmDmmCmmTmm13.610.40.1213.610.40.2013.610.40.3340ER 16ER 25ER 40M3-M12M4-M20M8-M331001251412842635,510,510,06,07,510,080.493.1080.493.1680.493.2689.202.1089.202.1689.202.2613.610.50.1213.610.50.2013.610.50.3350ER 16ER 25ER 40M3-M12M4-M20M8-M331001341502842635,510,510,06,07,510,0* SE SUMINISTRA CON LLAVE / * SUPPLIED WITH WRENCH80.493.1080.493.1680.493.2689.202.1089.202.1689.202.26B.26