16 - ToolSpann

MANDRINOS PORTAFRESAS ANTIVIBRATORIOSJIS B 6339 - BTpara fresas con mangos roscados de apoyo frontalANTIVIBRATORY END MILL ADAPTORSfor frontal End Mill support screwed shanks A20.315PREEQUILIBRADO / PRE-BALANCEDISO-40: 15.000 r.p.m. G-6,3ISO-50: 10.000 r.p.m. G-6,3Portafresas Antivibratorios fabricados con materiales y mecanismos con propiedadesantivibratorias. Longitudes estándar y extra largas, indicado para moldistas y fabricacionesespeciales.Antivibratory Shell Mill Adaptors manufactured with materials and mechanisms havingantivibration properties. Standard and extra long lengths, suitable for moulding and specialmanufactures.JIS B 6339 - BTKISOL 2mmDmmD 1mmAmmd 1mmGmmd 2mmA20.315.40.10/200A20.315.40.10/250A20.315.40.10/300A20.315.40.12/200A20.315.40.12/250A20.315.40.12/300A20.315.40.16/200A20.315.40.16/250A20.315.40.16/3004015820825815820825815820825850505050505050505035404538434443444720025030020025030020025030010,510,510,512,512,512,517,017,017,0M10M10M10M12M12M12M16M16M16181818212121292929A20.315.50.12/250A20.315.50.12/300A20.315.50.12/400A20.315.50.16/250A20.315.50.16/300A20.315.50.16/400A20.315.50.16/50050197247347197247347447808080808080804247575055657625030040025030040050012,512,512,517,017,017,017,0M12M12M12M16M16M16M1621212129292929Los mandrinos antivibratoriosDIN 69871 - JIS 6339-BT en ISO 50pueden convertirse en acoplamientosDIN 2080 mediante un tirante especial.ISO 50 Axial compensation Toolholders asper DIN 69871 and JIS 6339-BT couldbecome DIN 2080 tapers by using thespecial pull stud.Ref. A85.752.50.50D.20