Manual Técnico de Productos - Fabrica MX - Construcción

Floor mounted aluminium extrusionFlat SurfaceElastomeric seal(Actual seal Profile may differ the shown)S.W.WallOptional Elastomeric Seal(Provides Enhanced Movementcapability)431 Ref1/4˝ Ø x 1 3/4˝ LG. Hex HeadConcrete threaded AnchorSpaced @ 18˝ O.C.J.O.Typical SectionFloor to wallNote:1. LPC-200C Seal Profile Shown. SealProfile for LPC-300 Similar.1˝ System HeightFlat Surface Elastomeric Seal(Acual Seal Profile may differ then Shown)S.W.Optional Elastomeric Seal(Provides enhanced Movementcapability)Floor Mounted aluminum extrusionJ.O.1/4 Ø x 1 3/4˝ LG. Hex HeadConcrete Threader AnchorSpaced @ 18˝ O.C.2 1/2˝ Min BlockoutTypical SectionFloor to floorNote:1. Adjusment of LPF floor to floor basemember will be required to align withwall mount extrusion where transitionsoccur2. Block out depth equals system heightminus thickness of floor finish material.3. LPF-100 seal profile shown. Sealprofile for LPF-200 similar.Finish Floor material1˝ Systema HeightFlat surface elastomeric seal(Actual seal profile may differ then shown)S.W.Optional Elastomeric seal(Provides enhanced movementcapability)Wall1/4˝ Ø x 1 3/4˝ LG. Hex HeadConcrete Threaded AnchorSpaced @ 18 ˝ O.C. (Typical)at wall)2 1/2˝ min. (Blockout width) J.O.Typical SectionFloor to wallNote:1. Block out depth equals system heightminus thickness of floor finish material.3. LPF-100C seal profile shown. Sealprofile for LPF-200C similar.110