Manual Técnico de Productos - Fabrica MX - Construcción

1 1/2˝ (38)(Typ) Min1/4˝ Dia Stn Stl Flatheadscrew Spaced @ 18˝ O.C.“B”3/16˝ Stainless steel cover plateNote:Primary surfaces of stainless steelsupplied with brushed finishFJX ExtensionFinished floor(By others)1 1/8˝ (29)Aluminum base extrusionSeismic centering barspaced @ 18˝ O.C.“A” 2-5/16˝ (59)2-5/67˝ (REF)FJX-400 Thru FJX-2400 DetailFloor to floor condition1/4˝ Concrete expansion anchorw/washer and nut spaced @ 24˝ O.C.Dimension chartModel “A”@Min. “A”@Mid “A”@Max “B” Total movementFJX-400 1˝(25) 4˝(102) 6˝(152) 10 3/8˝(264) 5˝(127)FJX-600 1˝(25) 6˝(152) 9˝(229) 13 3/4˝ (349) 8˝ (203)FCX-800 1˝(25) 8˝ (203) 12˝ (305) 15 3/4˝ (400) 11˝(279)FCX-1000 1˝(25) 10˝(254) 15˝(381) 18 3/4˝ (476) 14˝ (356)FCX-1200 1˝(25) 12˝ (305) 18˝ (457) 21 3/4˝ (552) 17˝ (432)FCX-1800 1˝(25) 18˝ (457) 27˝ (686) 31 3/4˝ (806) 26˝ (660)FCX-2400 1˝ (25) 24˝ (607) 36˝ (914) 40 3/4˝ (1035) 35˝ (889)Note: Minimum and maximum values are after movement occurs. Midpoint value is the recommended size of opening at instalation.( ) - denotes milimeters“B”1/4˝ Dia Stn STL Flatheadscrew spaced @ 18˝ O.C.3/16˝ Aluminium cover plate(for aviable plate finishes see note below)Finished floor(by others)2 3/16@ (56) Ref.Aluminium extrusionSeismic centering barspaced @18˝ O.C.“A”FXE-400 Thru FXE-1800 DetailFloor to floor condition1/4˝ concrete expansionanchor w/washer and nutspaced @24˝ O.C.Moisture Barriernote:“A”Exposed Surfaceor openings up to 6˝- Plate supplied with grooved surface / mill finishor openings greater than 6˝-Plate Supplied with brush finish- Grooves optional for plates up to 24˝ in width- For plates over 24˝ contact BASF for available finishes.Dimension chartModel “A”@Min. “A”@Mid “A”@Max “B” Total movementFXE-400 2˝(25) 4˝(102) 6˝(152) 6 1/2˝(165) 4˝(102)FXE-600 2˝(25) 6˝(152) 9˝(229) 9 1/2˝(241) 7˝ (178)FXE-800 2˝(25) 8˝ (203) 12˝ (305) 12 1/2˝ (317) 10˝(254)FXE-1000 2˝(25) 10˝(254) 15˝(381) 15 1/2˝ (394) 13˝ (330)FXE-1200 2˝(25) 12˝ (305) 18˝ (457) 18 1/2˝ (470) 16˝ (406)FXE-1800 2˝(25) 18˝ (457) 27˝ (686) 27 1/2˝ (699) 25˝ (635)Note: Minimum and maximum values are after movement occurs. Midpoint value is the recommended size of opening at instalation() - denotes milimeters121