Manual Técnico de Productos - Fabrica MX - Construcción

Tablas de MovimientoAbertura Ancho del Movimiento“A” sistema (medio) totalModelo pulg. mm pulg. mm pulg. mmSPJ-400 4.0 100 12.88 327 4.75 121SPJ-600 6.0 152 14.88 378 7.75 197SPJ-800 8.0 203 18.88 479 10.75 273SPJ-1000 10.0 254 20.88 530 13.75 349SPJ-1200 12.0 305 23.88 606 16.75 425SPJ-1600 16.0 406 29.88 759 22.75 578SPJ-1800 18.0 457 34.88 886 25.75 654SPJ-400C 4.0 100 8.44 214 3.00 76SPJ-600C 6.0 152 10.44 265 5.50 140SPJ-800C 8.0 203 13.44 341 8.00 203SPJ-1000C 10.0 254 15.44 392 10.50 267SPJ-1200C 12.0 305 17.94 456 13.00 330SPJ-1600C 16.0 406 22.94 583 18.00 457SPJ-1800C 18.0 457 26.44 672 20.50 521Note: Custom sizes and heavy load applications are available. ContactWBA for additionalSealant(by others)S.W.Top of finished floor material1 minBacker rod(by others)2 1/4Typical systemFloor to wallØ 1/4˝ anchorspaced @ 15˝ O.C.Aluminum pan1 3/8Ø 1/4˝ bolt and nutspaced @ 36˝ O.C.Aluminum edge frame1/4 Ø x 2 1/4˝ L.G. Threadedconcrete anchor spaced @ 18˝ O.C.note:1. Backer rod at sealant locationsnot shown for clarity. Backer Rodby others.2. Total Thermal movement capabilityof 2 component polyurethane sealantis 5/8˝ (typical all model sizes)3. Enhanced movement capabilitiesavilable.J.O.“B”Note: Exposed Alumminum surfacesmill finish (standard)S.W.Typical SectionFloor to Floornote:1. Total thermal movement capabilityof 2 component polyurethane sealantis 1 1/4˝ (typical all model sizes)2. Enhanced movement capabilitiesavailable.Backer rod(by others)2 1/41 minØ 1/4˝ bolt and nutspaced @ 36˝ O.C.Sealant(by others)1 3/8Top of finished floor materialAluminum edge frame1/4 Ø x 2 1/4˝ L.G. Threadedconcrete anchor spaced @ 18˝ O.C.“B”Seismic centering barspaced @ 18˝ O.C.Note: Exposed Alumminum surfacesmill finish standard124