Manual Técnico de Productos - Fabrica MX - Construcción

Seismic centering barspaced @18˝ O.C.Finished floor(by others)“B”3/16˝ Aluminium cover plate(for aviable plate finishes see note below)Aluminium base extrusion7/8˝ [22]“A”2 5/16˝ [59]2 5/8˝ [66] Ref3 1/2˝ [89] min1/4˝ Concrete expansionanchor w/washer and nutspaced @24˝ O.C.FJC-200 thru FJC-2400 detailFloor to Floor conditionExposed Surfacenote:“A”or openings up to 6˝- Plate supplied with grooved surface / mill finishor openings greater than 6˝-Plate Supplied with brush finish- Grooves optional for plates up to 24˝ in width- For plates over 24˝ contact WBA for available finishes.Dimension chartModel “A”@Min. “A”@Mid “A”@Max “B” Total movementFJC-200 1˝(25) 2˝(51) 3˝(76) 3 1/2˝(89) 2˝(51)FJC-400 1˝(25) 4˝(102) 6˝(152) 6 1/2˝(165) 5˝(127)FJC-600 1˝(25) 6˝(152) 9˝(229) 9 1/2˝(241) 8˝ (203)FCJ-800 1˝(25) 8˝ (203) 12˝ (305) 12 1/2˝ (317) 11˝(279)FCJ-1000 1˝(25) 10˝(254) 15˝(381) 15 1/2˝ (394) 14˝ (356)FCJ-1200 1˝(25) 12˝ (305) 18˝ (457) 18 1/2˝ (470) 17˝ (432)FCJ-1800 1˝(25) 18˝ (457) 27˝ (686) 27 1/2˝ (699) 26˝ (660)FCJ-2400 1˝ (25) 24˝ (607) 36˝ (914) 36 1/2˝ (927) 35˝ (889)Note: Minimum and maximum values are after movement occurs. Midpoint value is the recommended size of opening at instalation1 1/2˝ (38) Typ (min.)“B”3/16˝ Aluminum cover plate(for avaiable plate finishessee note below)Finished floor(by others)1 1/8˝(29)Seismic centering barspaced @ 18˝ O.C.Aluminum baseextrusion“A”2-5/16˝ (59)2 5/8˝ (67) Ref1/4˝ concrete expansion anchorw/washer and nut spaced@24˝ O.C.FJG-400 thru FJG-2400 detailfloor to floor conditionexposed surfaceor openings up to 6˝- Plate supplied with grooved surface/mill finishor openings greater than 6˝- Plate supplied with brush finish- Grooves optional for plates up to 24˝ in width- For plates over 24˝ contact WBA for available finishes.Dimension chartModel “A”@Min. “A”@Mid “A”@Max “B” Total movementFJG-400 1˝(25) 4˝(102) 6˝(152) 10 3/8˝(264) 5˝(127)FJG-600 1˝(25) 6˝(152) 9˝(229) 13 3/4˝ (349) 8˝ (203)FCG-800 1˝(25) 8˝ (203) 12˝ (305) 15 3/4˝ (400) 11˝(279)FCG-1000 1˝(25) 10˝(254) 15˝(381) 18 3/4˝ (476) 14˝ (356)FCG-1200 1˝(25) 12˝ (305) 18˝ (457) 21 3/4˝ (552) 17˝ (432)FCG-1800 1˝(25) 18˝ (457) 27˝ (686) 31 3/4˝ (806) 26˝ (660)FCG-2400 1˝ (25) 24˝ (607) 36˝ (914) 40 3/4˝ (1035) 35˝ (889)Note: Minimum and maximum values are after movement occurs. Midpoint value is the recommended size of opening at instalation.( ) - denotes milimeters120