MANUAL

5. Quick setup of the control panel
You can use the control panel to adjust preferred
functions quickly and easily.
1 Set the preferred speed for the timer function
using the plus and minus buttons. To quickly reset
to the factory speed setting, push both the plus and
minus buttons simultaneously.
2 Set the preferred post-running time of 5, 15 or 30
minutes for the timer function using the Timer button.
(If you choose to use a timer.)
3 Select the preferred humidity mode, silent or maximum
capacity.
The fan is now ready for use. For a more detailed
description of functions, etc., see the Description
section on page 162.
1
2
3
11
EN