2 - Axminster Power Tool Centre

Mobile dust extractors
4 Intended use
The mobile dust extractors are designed for
extracting hazardous dusts with limit values
up to 0,1 mg/m³ and wood dust in accordance
with dust class M as per IEC 60335-2-
69.
The mobile dust extractors are designed to
extract water
as well as for heavy-duty applications and industrial
use in accordance with EN 60335-1
and EN 60335-2-69.
The user bears the responsibility for
damage and accidents caused by improper
use.
5 Safety instructions
Warning! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
– The machine is not intended for use by
persons (including children) with limited
physical, sensory or mental ability or without
sufficient experience and/or knowledge,
unless they are supervised by a
person responsible for their safety or have
been instructed on how to use the machine.
Children should always be supervised
to ensure that they do not play with
the machine.
– Warning:the machine may contain hazardous
dust. Only authorised and qualified
personnel with suitable protective equipment
may perform maintenance work, including
emptying the container and
CTM/ CTM AC CLEANTEX
CTM 48 E, CTM 48 E LE, CTM 48 E AC, CTM 48 E LE AC 740 x 406 x 1005 mm
Weight CTM 26 E 13,9 kg
CTM 26 E AC 14,7 kg
CTM 36 E, CTM 36 E LE 14,4 kg
GB
15,2 kg
CTM 36 E AC, CTM 36 E LE AC, CTM 36 E
AC-LHS
CTM 48 E, CTM 48 E LE 18,8 kg
CTM 48 E AC, CTM 48 E LE AC 19,6 kg
changing the filter. Do not operate the machine
without a fully fitted filter system.
– When handling and extracting dusts that
are hazardous to health, the safety regulations
applicable in your country as well as
the specifications of the material manufacturer
must be observed without fail.
– When extracting hazardous dust or large
quantities of oak or beech dust, only use
the machine in combination with a single
electric or pneumatic tool.
– Risk of explosion and fire hazard: do
not extract sparks or hot dust, flammable
or explosive dust (e.g. magnesium, aluminium),
flammable or explosive fluids
(e.g. petrol, thinner), aggressive fluids/
solids (e.g. acid, leach, solvent). The extraction
of wood dust is permitted. This
mobile dust extractor is suitable for extracting
paint dust. Operate the machine in
a well-ventilated room (observe national
industrial safety regulations).
– Do not damage the mains power cable
(e.g. by driving over, dragging, etc.). Protect
from heat, oil and sharp edges. Do not
pull the plug from the socket by the cable.
– Check the plug and the cable regularly and
have them replaced by an authorised service
workshop should either become damaged
cable with the type specified in the
spare parts list. Always replace the mains
power cable with the type specified in the
spare parts list.
– Do not expose the machine to rain.
– The machine should only be used by appointed
persons instructed in correct machine
handling.
– Before use, operators shall be provided
with information, instruction and training
for the use of the machine and the substances
for which it is to be used, including
15