Accu 285-15 - Birchmeier Sprühtechnik AG
Accu 285-15 - Birchmeier Sprühtechnik AG
Accu 285-15 - Birchmeier Sprühtechnik AG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Précautions à prendre lors de la manipulation de la batterie<br />
� Ne jamais la laisser a proximité d‘une flamme vive.<br />
� Ne pas court-circuiter la batterie.<br />
� Ne pas ouvrir la batterie.<br />
� Prière de faire attention que les liquides échappés n’ont pas de contacte avec la peau et surtout pas<br />
avec les yeux.<br />
Important<br />
� En cas de contact avec la peau, rincer avec beaucoup d‘eau.<br />
� En cas de contact avec les yeux, rincer avec beaucoup d‘eau et consulter immédiatement un<br />
médecin.<br />
� Stockage de l’accu seulement dans l’état déchargé (indication de chargement sur jaune),<br />
à 5°C – 20°C.<br />
� Des différences de température +40°C, resp. –20°C peuvent provoquer une réduction de la capacité<br />
d‘environ 40%.<br />
� Si l’accu n’a pas été usé durant un long temps, charger et décharger le tous les 6 mois.<br />
Déposer les batteries usées à un endroit spécialement<br />
prévu pour ce genre de déchets!!<br />
(Point de récolte des batteries usée)<br />
Pressure regulator<br />
Depending on the task set the switch either high pressure or low pressure.<br />
High pressure Low pressure<br />
To charge the battery<br />
� Insert plug (1) in the charging socket of <strong>Accu</strong> <strong>285</strong>-<strong>15</strong>.<br />
� Connect plug (2) to the mains.<br />
Charging socket<br />
Plug (1)<br />
After the load disconnect plug 1 and then plug 2.<br />
Important notes:<br />
� Recharge the battery only when the arrow needle is in the yellow area.<br />
� When spraying, do never fully discharge the battery to avoid exhaustive discharge.<br />
� While charging, do not use the sprayer.<br />
� Charge the battery at 0°C - 40°C (32°F - 104°F).<br />
After charging the battery, the red light „Charge“ will switch off<br />
and the green light „Ready“ will start to blink.<br />
Plug (2)