EUROLITE LED FX PAR-100 RGB DMX Spot User Manual - ELV

DMX-protocol
Channel: Value: Function:
1 000 – 010 off
011 – 024 Program 1
025 – 039 Program 2
040 – 054 Program 3
055 – 069 Program 4
070 – 084 Program 5
085 – 099 Program 6
100 – 114 Program 7
115 – 129 Program 8
130 – 144 Program 9
145 – 159 Program 10
160 – 174 Program 11
175 – 189 Program 12
190 – 214 Program 13
215 – 219 Program 14
220 – 234 Program 15
235 – 249 Sound control 1
250 – 255 Sound control 2
Channel: Value: Function:
2 000 - 255 Speed
Channel: Value: Function:
3 000 - 255 Flash
CLEANING AND MAINTENANCE
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
22/43
00030174.DOC, Version 1.0